| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Move display hti/hdport related members under drm_i915_private display
sub-struct.
Prefer adding anonymous sub-structs even for single members that aren't
our own structs.
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The HTI or HDPORT handling is sprinkled around. Centralize to one place.
Add a note about how subtle the mapping from HDPORT_STATE register to
dpll mask actually is.
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drm-intel-next
gvt-next-2022-11-17
- kernel doc fixes
- remove vgpu->released sanity check
- small clean up
Signed-off-by: Rodrigo Vivi <[email protected]>
From: Zhenyu Wang <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Panel power off delay is the time the panel power needs to remain off
after being switched off, before it can be switched on again.
For the purpose of respecting panel power off delay at driver probe,
assuming the panel was last switched off at driver probe is overly
pessimistic. If the panel was never on, we'd end up waiting for no
reason.
We don't know what has happened before kernel boot, but we can make some
assumptions:
- The panel may have been switched off right before kernel boot by some
pre-os environment.
- After kernel boot, the panel may only be switched off by i915.
- At i915 driver probe, only a previously loaded and removed i915 may
have switched the panel power off.
With these assumptions, we can initialize the last power off time to
kernel boot time, if we also ensure i915 driver remove waits for the
panel power off delay after switching panel power off.
This shaves off the time it takes from kernel boot to i915 probe from
the first panel enable, if (and only if) the panel was not already
enabled at boot.
The encoder destroy hook is pretty much the last place where we can
wait, right after we've ensured the panel power has been switched off,
and before the whole encoder is destroyed.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/7417
Cc: Lee Shawn C <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Tested-by: Lee Shawn C <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The SPDX header is missing, let's add it and fix the corresponding
checkpatch warning.
Suggested-by: Maíra Canal <[email protected]>
Fixes: 44a3928324e9 ("drm/tests: Add Kunit Helpers")
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Some extra blank lines slipped through, remove them.
Fixes: 8fc0380f6ba7 ("drm/client: Add some tests for drm_connector_pick_cmdline_mode()")
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
The function get_pt_type is defined in the gtt.c file, but not
called elsewhere, so delete this unused function.
drivers/gpu/drm/i915/gvt/gtt.c:285:19: warning: unused function 'get_pt_type'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2277
Reported-by: Abaci Robot <[email protected]>
Signed-off-by: Jiapeng Chong <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Zhenyu Wang <[email protected]>
|
|
Delete the redundant word 'the'.
Signed-off-by: wangjianli <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Zhenyu Wang <[email protected]>
|
|
The life cycle of a vGPU, which is represented by a vfio_device, has been
managed by the VFIO core logic. Remove the vgpu->released, which was used
for a sanity check on the removal path of the vGPU instance. The sanity
check has already been covered in the VFIO core logic.
Cc: Zhenyu Wang <[email protected]>
Cc: Kevin Tian <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: [email protected]
Suggested-by: Alex Williamson <[email protected]>
Signed-off-by: Zhi Wang <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Zhenyu Wang <[email protected]>
|
|
struct gvt_firmware_header has a crc32 member in which all members that
come after the that field are used to calculate it. The previous
implementation added the value '4' (crc32's u32 size) to calculate the
crc32_start offset which came across as a bit cryptic until you take a
deeper look at the struct.
This patch changes crc32_start offset to the 'version' member which is
the first member of the struct gvt_firmware_header after crc32.
It's worth mentioning that doing a build before/after this patch results
in no binary output differences.
Signed-off-by: Paulo Miguel Almeida <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Zhenyu Wang <[email protected]>
|
|
Some functions seem to have been renamed without updating the kernel-doc
markup causing warnings. Also, struct intel_vgpu_dmabuf_obj is not
properly documented, but has a kerneld-doc markup.
Fix those warnings:
drivers/gpu/drm/i915/gvt/aperture_gm.c:308: warning: expecting prototype for inte_gvt_free_vgpu_resource(). Prototype was for intel_vgpu_free_resource() instead
drivers/gpu/drm/i915/gvt/aperture_gm.c:344: warning: expecting prototype for intel_alloc_vgpu_resource(). Prototype was for intel_vgpu_alloc_resource() instead
drivers/gpu/drm/i915/gvt/cfg_space.c:257: warning: expecting prototype for intel_vgpu_emulate_cfg_read(). Prototype was for intel_vgpu_emulate_cfg_write() instead
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'vgpu' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'info' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'dmabuf_id' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'kref' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'initref' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/dmabuf.h:61: warning: Function parameter or member 'list' not described in 'intel_vgpu_dmabuf_obj'
drivers/gpu/drm/i915/gvt/handlers.c:3066: warning: expecting prototype for intel_t_default_mmio_write(). Prototype was for intel_vgpu_default_mmio_write() instead
drivers/gpu/drm/i915/gvt/mmio_context.c:560: warning: expecting prototype for intel_gvt_switch_render_mmio(). Prototype was for intel_gvt_switch_mmio() instead
drivers/gpu/drm/i915/gvt/page_track.c:131: warning: expecting prototype for intel_vgpu_enable_page_track(). Prototype was for intel_vgpu_disable_page_track() instead
drivers/gpu/drm/i915/gvt/vgpu.c:215: warning: expecting prototype for intel_gvt_active_vgpu(). Prototype was for intel_gvt_activate_vgpu() instead
drivers/gpu/drm/i915/gvt/vgpu.c:230: warning: expecting prototype for intel_gvt_deactive_vgpu(). Prototype was for intel_gvt_deactivate_vgpu() instead
drivers/gpu/drm/i915/gvt/vgpu.c:358: warning: expecting prototype for intel_gvt_destroy_vgpu(). Prototype was for intel_gvt_destroy_idle_vgpu() instead
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/375c0c0ca2ef414f25e14f274457f77373a9268d.1657699522.git.mchehab@kernel.org
Acked-by: Zhenyu Wang <[email protected]>
|
|
There is a spelling mistake in a gvt_vgpu_err error message. Fix it.
Fixes: 695fbc08d80f ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Zhi Wang <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Zhi Wang <[email protected]>
Signed-off-by: Zhenyu Wang <[email protected]>
|
|
Remove unused parameters and cleanup dead code.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Clean that up a bit, no functional change.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The basic problem here is that it's not allowed to page fault while
holding the reservation lock.
So it can happen that multiple processes try to validate an userptr
at the same time.
Work around that by putting the HMM range object into the mutex
protected bo list for now.
v2: make sure range is set to NULL in case of an error
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
CC: [email protected]
Signed-off-by: Alex Deucher <[email protected]>
|
|
Since switching to HMM we always need that because we no longer grab
references to the pages.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
CC: [email protected]
Signed-off-by: Alex Deucher <[email protected]>
|
|
Now that we've fixed the issue with using the incorrect topology manager,
we're actually grabbing the topology manager's lock - and consequently
deadlocking. Luckily for us though, there's actually nothing in AMD's DSC
state computation code that really should need this lock. The one exception
is the mutex_lock() in dm_dp_mst_is_port_support_mode(), however we grab no
locks beneath &mgr->lock there so that should be fine to leave be.
Gitlab issue: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Lyude Paul <[email protected]>
Fixes: 8c20a1ed9b4f ("drm/amd/display: MST DSC compute fair share")
Cc: <[email protected]> # v5.6+
Reviewed-by: Wayne Lin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This bug hurt me. Basically, it appears that we've been grabbing the
entirely wrong mutex in the MST DSC computation code for amdgpu! While
we've been grabbing:
amdgpu_dm_connector->mst_mgr
That's zero-initialized memory, because the only connectors we'll ever
actually be doing DSC computations for are MST ports. Which have mst_mgr
zero-initialized, and instead have the correct topology mgr pointer located
at:
amdgpu_dm_connector->mst_port->mgr;
I'm a bit impressed that until now, this code has managed not to crash
anyone's systems! It does seem to cause a warning in LOCKDEP though:
[ 66.637670] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
This was causing the problems that appeared to have been introduced by:
commit 4d07b0bc4034 ("drm/display/dp_mst: Move all payload info into the atomic state")
This wasn't actually where they came from though. Presumably, before the
only thing we were doing with the topology mgr pointer was attempting to
grab mst_mgr->lock. Since the above commit however, we grab much more
information from mst_mgr including the atomic MST state and respective
modesetting locks.
This patch also implies that up until now, it's quite likely we could be
susceptible to race conditions when going through the MST topology state
for DSC computations since we technically will not have grabbed any lock
when going through it.
So, let's fix this by adjusting all the respective code paths to look at
the right pointer and skip things that aren't actual MST connectors from a
topology.
Gitlab issue: https://gitlab.freedesktop.org/drm/amd/-/issues/2171
Signed-off-by: Lyude Paul <[email protected]>
Fixes: 8c20a1ed9b4f ("drm/amd/display: MST DSC compute fair share")
Cc: <[email protected]> # v5.6+
Reviewed-by: Wayne Lin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Looks like that we're accidentally dropping a pretty important return code
here. For some reason, we just return -EINVAL if we fail to get the MST
topology state. This is wrong: error codes are important and should never
be squashed without being handled, which here seems to have the potential
to cause a deadlock.
Signed-off-by: Lyude Paul <[email protected]>
Reviewed-by: Wayne Lin <[email protected]>
Fixes: 8ec046716ca8 ("drm/dp_mst: Add helper to trigger modeset on affected DSC MST CRTCs")
Cc: <[email protected]> # v5.6+
Signed-off-by: Alex Deucher <[email protected]>
|
|
It appears that amdgpu makes the mistake of completely ignoring the return
values from the DP MST helpers, and instead just returns a simple
true/false. In this case, it seems to have come back to bite us because as
a result of simply returning false from
compute_mst_dsc_configs_for_state(), amdgpu had no way of telling when a
deadlock happened from these helpers. This could definitely result in some
kernel splats.
V2:
* Address Wayne's comments (fix another bunch of spots where we weren't
passing down return codes)
Signed-off-by: Lyude Paul <[email protected]>
Fixes: 8c20a1ed9b4f ("drm/amd/display: MST DSC compute fair share")
Cc: Harry Wentland <[email protected]>
Cc: <[email protected]> # v5.6+
Reviewed-by: Wayne Lin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Assert on non-OK response from SMU is unnecessary.
It was replaced with respective log message on other asics
in the past with commit:
"drm/amd/display: Removing assert statements for Linux"
[How]
Remove assert and add dbg logging as on other DCNs.
Signed-off-by: Roman Li <[email protected]>
Reviewed-by: Saaem Rizvi <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Move the new callback outside of the guard.
Fixes: dc55b106ad47 ("drm/amd/display: Disable phantom OTG after enable for plane disable")
CC: Alvin Lee <[email protected]>
CC: Alan Liu <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
There is no reason to use page based mappings, as the established
mappings are special driver mappings anyways and should not be
handled like normal pages.
Be consistent with what other drivers do and use raw PFN based
mappings.
Signed-off-by: Lucas Stach <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
|
|
The GPU is found on the NXP i.MX8MN SoC. The feature bits are taken from
the NXP downstream kernel driver 6.4.3.p2.
Signed-off-by: Marco Felsch <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
|
|
For the GSC engine we only want to capture the instance regs.
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: Alan Previn <[email protected]>
Reviewed-by: Alan Previn <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Previously, we only used PXP FW interface version-42 structures for
PXP arbitration session on ADL/TGL products and version-43 for HuC
authentication on DG2. That worked fine despite not differentiating such
versioning of the PXP firmware interaction structures. This was okay
back then because the only commands used via version 42 was not
used via version 43 and vice versa.
With MTL, we'll need both these versions side by side for the same
commands (PXP-session) with the older platform feature support. That
said, let's create separate files to define the structures and definitions
for both version-42 and 43 of PXP FW interfaces.
Signed-off-by: Alan Previn <[email protected]>
Reviewed-by: Daniele Ceraolo Spurio <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The MODULE_LICENSE macro is missing from the kunit helpers file, thus
leading to a build error.
Let's introduce it along with MODULE_AUTHOR.
Fixes: 44a3928324e9 ("drm/tests: Add Kunit Helpers")
Reported-by: Stephen Rothwell <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
The kunit helpers code weren't including its header, leading to a
warning that no previous prototype had been defined for public
functions.
Include the matching header to fix the warning.
Fixes: 44a3928324e9 ("drm/tests: Add Kunit Helpers")
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Maíra Canal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Maxime Ripard <[email protected]>
|
|
We've used a temporary platform device for firmware EDID loading since
it was introduced in commit da0df92b5731 ("drm: allow loading an EDID as
firmware to override broken monitor"), but there's no explanation why.
Using a temporary device does not play well with CONFIG_FW_CACHE=y,
which caches firmware images (e.g. on suspend) so that drivers can
request firmware when the system is not ready for it, and return the
images from the cache (e.g. during resume). This works automatically for
regular devices, but obviously not for a temporarily created device.
Stop using the throwaway platform device, and use the drm device
instead.
Note that this may still be problematic for cases where the display was
plugged in during suspend, and the firmware wasn't loaded and therefore
not cached before suspend.
References: https://lore.kernel.org/r/[email protected]
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2061
Reported-by: Matthieu CHARETTE <[email protected]>
Tested-by: Matthieu CHARETTE <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Support the kernel's nomodeset parameter for all PCI-based fbdev
drivers that use aperture helpers to remove other, hardware-agnostic
graphics drivers.
The parameter is a simple way of using the firmware-provided scanout
buffer if the hardware's native driver is broken. The same effect
could be achieved with per-driver options, but the importance of the
graphics output for many users makes a single, unified approach
worthwhile.
With nomodeset specified, the fbdev driver module will not load. This
unifies behavior with similar DRM drivers. In DRM helpers, modules
first check the nomodeset parameter before registering the PCI
driver. As fbdev has no such module helpers, we have to modify each
driver individually.
The name 'nomodeset' is slightly misleading, but has been chosen for
historical reasons. Several drivers implemented it before it became a
general option for DRM. So keeping the existing name was preferred over
introducing a new one.
v2:
* print a warning if a driver does not init (Helge)
* wrap video_firmware_drivers_only() in helper
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move the nomodeset kernel parameter to drivers/video to make it
available to non-DRM drivers. Adapt the interface, but keep the DRM
interface drm_firmware_drivers_only() to avoid churn within DRM. The
function should later be inlined into callers.
The parameter disables any DRM graphics driver that would replace a
driver for firmware-provided scanout buffers. It is an option to easily
fallback to basic graphics output if the hardware's native driver is
broken. Moving it to a more prominent location wil make it available
to fbdev as well.
v2:
* clarify the meaning of the nomodeset parameter (Javier)
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The fbdev damage worker is unused, so remove it.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Schedule the deferred-I/O worker instead of the damage worker after
writing to the fbdev framebuffer. The deferred-I/O worker then performs
the dirty-fb update. The fbdev emulation will initialize deferred I/O
for all drivers that require damage updates. It is therefore a valid
assumption that the deferred-I/O worker is present.
It would be possible to perform the damage handling directly from within
the write operation. But doing this could increase the overhead of the
write or interfere with a concurrently scheduled deferred-I/O worker.
Instead, scheduling the deferred-I/O worker with its regular delay of
50 ms removes load off the write operation and allows the deferred-I/O
worker to handle multiple write operations that arrived during the delay
time window.
v3:
* remove unused variable (lkp)
v2:
* keep drm_fb_helper_damage() (Daniel)
* use fb_deferred_io_schedule_flush() (Daniel)
* clarify comments (Daniel)
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Call fb_dirty directly from drm_fb_helper_deferred_io() to avoid the
latency of running the damage worker.
The deferred-I/O helper drm_fb_helper_deferred_io() runs in a worker
thread at regular intervals as part of writing to mmaped framebuffer
memory. It used to schedule the fbdev damage worker to flush the
framebuffer. Changing this to flushing the framebuffer directly avoids
the latency introduced by the damage worker.
v2:
* remove fb_dirty from defio in separate patch (Daniel)
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The helper for processing deferred I/O on pages has no dependency on
the fb_dirty damge-handling callback; so remove the test. In practice,
deferred I/O is only used with damage handling and the damage worker
already guarantees the presence of the fb_dirty callback.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move the dirty-fb update from the damage-worker callback into the
new helper drm_fb_helper_fb_dirty(), so that it can run outside the
damage worker. This change will help to remove the damage worker
entirely. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Set the damage area in the new helper drm_fb_helper_add_damage_clip().
It can now be updated without scheduling the damage worker. This change
will help to remove the damage worker entirely. No functional changes.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
These formats are not subsampled, but that means hsub and vsub should be
1, not 0.
Fixes: 94b292b27734 ("drm: drm_fourcc: add NV15, Q410, Q401 YUV formats")
Reported-by: George Kennedy <[email protected]>
Reported-by: butt3rflyh4ck <[email protected]>
Signed-off-by: Brian Starkey <[email protected]>
Reviewed-by: Liviu Dudau <[email protected]>
Signed-off-by: Liviu Dudau <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
drm_mode_config_init() simply calls drmm_mode_config_init(), hence
cleanup is automatically handled through registering
drm_mode_config_cleanup() with drmm_add_action_or_reset().
While at it, get rid of the deprecated drm_mode_config_init() and
replace it with drmm_mode_config_init() directly.
Signed-off-by: Danilo Krummrich <[email protected]>
Signed-off-by: Liviu Dudau <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use drm managed resource allocation (drmm_universal_plane_alloc()) in
order to get rid of the explicit destroy hook in struct drm_plane_funcs.
Signed-off-by: Danilo Krummrich <[email protected]>
Signed-off-by: Liviu Dudau <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use drmm_crtc_init_with_planes() instead of drm_crtc_init_with_planes()
to get rid of the explicit destroy hook in struct drm_plane_funcs.
Signed-off-by: Danilo Krummrich <[email protected]>
Signed-off-by: Liviu Dudau <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Using drm_device->dev_private is deprecated. Since we've switched to
devm_drm_dev_alloc(), struct drm_device is now embedded in struct
malidp_drm, hence we can use container_of() to get the struct drm_device
instance instead.
Signed-off-by: Danilo Krummrich <[email protected]>
Signed-off-by: Liviu Dudau <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use drm managed resources to allocate driver structures and get rid of
the deprecated drm_dev_alloc() call and replace it with
devm_drm_dev_alloc().
This also serves as preparation to get rid of drm_device->dev_private
and to fix use-after-free issues on driver unload.
Signed-off-by: Danilo Krummrich <[email protected]>
Signed-off-by: Liviu Dudau <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In i915_gem_madvise_ioctl() we immediately purge the object is not
currently used, like when the mm.pages are NULL. With shmem the pages
might still be hanging around or are perhaps swapped out. Similarly with
ttm we might still have the pages hanging around on the ttm resource,
like with lmem or shmem, but here we need to be extra careful since
async unbinds are possible as well as in-progress kernel moves. In
i915_ttm_purge() we expect the pipeline-gutting to nuke the ttm resource
for us, however if it's busy the memory is only moved to a ghost object,
which then leads to broken behaviour when for example clearing the
i915_tt->filp, since the actual ttm_tt is still alive and populated,
even though it's been moved to the ghost object. When we later destroy
the ghost object we hit the following, since the filp is now NULL:
[ +0.006982] #PF: supervisor read access in kernel mode
[ +0.005149] #PF: error_code(0x0000) - not-present page
[ +0.005147] PGD 11631d067 P4D 11631d067 PUD 115972067 PMD 0
[ +0.005676] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.012962] Workqueue: events ttm_device_delayed_workqueue [ttm]
[ +0.006022] RIP: 0010:i915_ttm_tt_unpopulate+0x3a/0x70 [i915]
[ +0.005879] Code: 89 fb 48 85 f6 74 11 8b 55 4c 48 8b 7d 30 45 31 c0 31 c9 e8 18 6a e5 e0 80 7d 60 00 74 20 48 8b 45 68
8b 55 08 4c 89 e7 5b 5d <48> 8b 40 20 83 e2 01 41 5c 89 d1 48 8b 70
30 e9 42 b2 ff ff 4c 89
[ +0.018782] RSP: 0000:ffffc9000bf6fd70 EFLAGS: 00010202
[ +0.005244] RAX: 0000000000000000 RBX: ffff8883e12ae380 RCX: 0000000000000000
[ +0.007150] RDX: 000000008000000e RSI: ffffffff823559b4 RDI: ffff8883e12ae3c0
[ +0.007142] RBP: ffff888103b65d48 R08: 0000000000000001 R09: 0000000000000001
[ +0.007144] R10: 0000000000000001 R11: ffff88829c2c8040 R12: ffff8883e12ae3c0
[ +0.007148] R13: 0000000000000001 R14: ffff888115184140 R15: ffff888115184248
[ +0.007154] FS: 0000000000000000(0000) GS:ffff88844db00000(0000) knlGS:0000000000000000
[ +0.008108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ +0.005763] CR2: 0000000000000020 CR3: 000000013fdb4004 CR4: 00000000003706e0
[ +0.007152] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ +0.007145] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ +0.007154] Call Trace:
[ +0.002459] <TASK>
[ +0.002126] ttm_tt_unpopulate.part.0+0x17/0x70 [ttm]
[ +0.005068] ttm_bo_tt_destroy+0x1c/0x50 [ttm]
[ +0.004464] ttm_bo_cleanup_memtype_use+0x25/0x40 [ttm]
[ +0.005244] ttm_bo_cleanup_refs+0x90/0x2c0 [ttm]
[ +0.004721] ttm_bo_delayed_delete+0x235/0x250 [ttm]
[ +0.004981] ttm_device_delayed_workqueue+0x13/0x40 [ttm]
[ +0.005422] process_one_work+0x248/0x560
[ +0.004028] worker_thread+0x4b/0x390
[ +0.003682] ? process_one_work+0x560/0x560
[ +0.004199] kthread+0xeb/0x120
[ +0.003163] ? kthread_complete_and_exit+0x20/0x20
[ +0.004815] ret_from_fork+0x1f/0x30
v2:
- Just use ttm_bo_wait() directly (Niranjana)
- Add testcase reference
Testcase: igt@gem_madvise@dontneed-evict-race
Fixes: 213d50927763 ("drm/i915/ttm: Introduce a TTM i915 gem object backend")
Reported-by: Niranjana Vishwanathapura <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Nirmoy Das <[email protected]>
Cc: <[email protected]> # v5.15+
Reviewed-by: Niranjana Vishwanathapura <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Reviewed-by: Andrzej Hajda <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
vm_fault_ttm() should not expect ttm ghost obj so remove that check.
Suggested-by: Matthew Auld <[email protected]>
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
All calls to i915_vma_move_to_active are surrounded by vma lock
and/or there are multiple local helpers for it in particular tests.
Let's replace it by common helper.
The patch should not introduce functional changes.
Signed-off-by: Andrzej Hajda <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since almost all calls to i915_vma_move_to_active are prepended with
i915_request_await_object, let's call the latter from
_i915_vma_move_to_active by default and add flag allowing bypassing it.
Adjust all callers accordingly.
The patch should not introduce functional changes.
Signed-off-by: Andrzej Hajda <[email protected]>
Acked-by: Tvrtko Ursulin <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Signed-off-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
There were several updates in the driver on how the workarounds are
handled since its documentation was written. Update the documentation to
reflect the current reality.
v2:
- Remove footnote that was wrongly referenced, adding back the
reference in the correct paragraph.
- Remove "Display workarounds" and just mention "display IP" under
"Other" category since all of them are peppered around the driver.
Cc: Matt Roper <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Acked-by: Balasubramani Vivekanandan <[email protected]> # v1
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- atomic-helper: Add begin_fb_access and end_fb_access hooks
- fb-helper: Rework to move fb emulation into helpers
- scheduler: rework entity flush, kill and fini
- ttm: Optimize pool allocations
Driver Changes:
- amdgpu: scheduler rework
- hdlcd: Switch to DRM-managed resources
- ingenic: Fix registration error path
- lcdif: FIFO threshold tuning
- meson: Fix return type of cvbs' mode_valid
- ofdrm: multiple fixes (kconfig, types, endianness)
- sun4i: A100 and D1 support
- panel:
- New Panel: Jadard JD9365DA-H3
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110083612.g63eaocoaa554soh@houat
|
|
The state of VRAM is unreliable due to a PCI event like AER, link reset
or DPC.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|