aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-11-11mfd: madera: Add support for requesting the supply clocksCharles Keepax2-1/+37
Add the ability to get the clock for each clock input pin of the chip and enable MCLK2 since that is expected to be a permanently enabled 32kHz clock. Signed-off-by: Charles Keepax <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: madera: Update DT binding document to support clock suppliesCharles Keepax1-0/+8
Add the 3 input clock sources for the chip into the device tree binding document. Signed-off-by: Charles Keepax <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: wm8998: Remove some unused registersCharles Keepax2-19/+0
Save a few bytes by removing some registers from the driver that are not currently used and not intended to be used at any point in the future. Signed-off-by: Charles Keepax <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: mt6397: Use PLATFORM_DEVID_NONE macro instead of -1Fabien Parent1-6/+6
Use the correct macro when adding the MFD devices instead of using directly '-1' value. Signed-off-by: Fabien Parent <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: twl: Endian fixups in i2c write and read wrappersJonathan Cameron1-4/+8
Use a local variable to ensure correct endian types for intermediate results. Identified by sparse when building the IIO driver. Signed-off-by: Jonathan Cameron <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: mt6397: Fix probe after changing mt6397-coreFrank Wunderlich1-24/+40
Part 3 from this series [1] was not merged due to wrong splitting and breaks mt6323 pmic on bananapi-r2 dmesg prints this line and at least switch is not initialized on bananapi-r2 mt6397 1000d000.pwrap:mt6323: unsupported chip: 0x0 this patch contains only the probe-changes and chip_data structs from original part 3 by Hsin-Hsiung Wang [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=164155 Fixes: a4872e80ce7d ("mfd: mt6397: Extract IRQ related code from core driver") Signed-off-by: Frank Wunderlich <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: arizona: Switch to using devm_gpiod_get()Dmitry Torokhov1-5/+1
Now that gpiolib recognizes wlf,reset legacy GPIO and will handle it even if DTS uses it without -gpio[s] suffix, we can switch to more standard devm_gpiod_get() and later remove devm_gpiod_get_from_of_node(). Note that we will lose "arizona /RESET" custom GPIO label, but since we do not set such custom label when using the modern binding, I opted to not having it here either. Signed-off-by: Dmitry Torokhov <[email protected]> Acked-by: Charles Keepax <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: max77620: Do not allocate IRQs upfrontThierry Reding2-4/+2
regmap_add_irq_chip() will try to allocate all of the IRQ descriptors upfront if passed a non-zero irq_base parameter. However, the intention is to allocate IRQ descriptors on an as-needed basis if possible. Pass 0 instead of -1 to fix that use-case. Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: qcom-spmi-pmic: Add support for PM/PMI8950Angelo G. Del Regno2-0/+6
Add the subtype and compatible strings for PM8950 and PMI8950, found in various SoCs, including MSM8953, MSM8956, MSM8976 and APQ variants. Signed-off-by: Angelo G. Del Regno <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: db8500-prcmu: Example using new OF_MFD_CELL/MFD_CELL_BASIC MACROsLee Jones1-14/+7
... with and without 'resources'. Signed-off-by: Lee Jones <[email protected]> Acked-by: Linus Walleij <[email protected]>
2019-11-11mfd: ab8500: Example using new OF_MFD_CELL MACROLee Jones1-96/+42
... with and without platform ID. Signed-off-by: Lee Jones <[email protected]> Acked-by: Linus Walleij <[email protected]>
2019-11-11mfd: Provide MACRO to declare commonly defined MFD cell attributesLee Jones1-0/+29
Signed-off-by: Lee Jones <[email protected]> Acked-by: Laxman Dewangan <[email protected]> Tested-by: Laxman Dewangan <[email protected]>
2019-11-11mfd: ipaq-micro: Use devm_platform_ioremap_resource() in micro_probe()Markus Elfring1-5/+1
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: rk808: Use DEFINE_RES_IRQ for rk808 RTC alarm IRQHeiko Stuebner1-5/+1
Do not open code the definition, instead use the nice DEFINE_RES_IRQ macro for it. Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: rk808: Set RK817 interrupt polarity to lowHeiko Stuebner1-1/+1
All other rk8xx operate with the polarity on low and even the old submitted devicetree snippet for the px30-evb declared the irq as low. So bring the rk817 preset in line with this, as there is really no reason for it to be the only with with a high polarity. The rk809/rk817 hasn't been added to any devicetrees so far, so this won't break anything. Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: rk808: Fix RK817 powerkey integrationHeiko Stuebner1-11/+3
The pwrkey integration seems to stem from the vendor kernel, as the compatible is wrong and also the order of key-irqs is swapped. So fix these issues to make the pwrkey on rk817 actually work. Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: rk808: Fix RK818 ID templateDaniel Schultz1-1/+1
The Rockchip PMIC driver can automatically detect connected component versions by reading the ID_MSB and ID_LSB registers. The probe function will always fail with RK818 PMICs because the ID_MSK is 0xFFF0 and the RK818 template ID is 0x8181. This patch changes this value to 0x8180. Fixes: 9d6105e19f61 ("mfd: rk808: Fix up the chip id get failed") Cc: [email protected] Cc: Elaine Zhang <[email protected]> Cc: Joseph Chen <[email protected]> Signed-off-by: Daniel Schultz <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: intel-lpss: Add default I2C device properties for Gemini LakeJarkko Nikula1-8/+20
It turned out Intel Gemini Lake doesn't use the same I2C timing parameters as Broxton. I got confirmation from the Windows team that Gemini Lake systems should use updated timing parameters that differ from those used in Broxton based systems. Fixes: f80e78aa11ad ("mfd: intel-lpss: Add Intel Gemini Lake PCI IDs") Tested-by: Chris Chiu <[email protected]> Signed-off-by: Jarkko Nikula <[email protected]> Acked-by: Andy Shevchenko <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11Merge branches 'ib-mfd-doc-sparc-libdevres-5.5' and 'ib-mfd-power-rtc-5.5' ↵Lee Jones7-86/+236
into ibs-for-mfd-merged
2019-11-11docs: driver-model: add devm_ioremap_ucTuowen Zhao1-0/+1
Signed-off-by: Tuowen Zhao <[email protected]> Acked-by: Luis Chamberlain <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11mfd: intel-lpss: Use devm_ioremap_uc for MMIOTuowen Zhao1-1/+1
Some BIOS erroneously specifies write-combining BAR for intel-lpss-pci in MTRR. This will cause the system to hang during boot. If possible, this bug could be corrected with a firmware update. This patch use devm_ioremap_uc to overwrite/ignore the MTRR settings by forcing the use of strongly uncachable pages for intel-lpss. The BIOS bug is present on Dell XPS 13 7390 2-in-1: [ 0.001734] 5 base 4000000000 mask 6000000000 write-combining 4000000000-7fffffffff : PCI Bus 0000:00 4000000000-400fffffff : 0000:00:02.0 (i915) 4010000000-4010000fff : 0000:00:15.0 (intel-lpss-pci) Link: https://bugzilla.kernel.org/show_bug.cgi?id=203485 Cc: <[email protected]> # v4.19+ Tested-by: AceLan Kao <[email protected]> Signed-off-by: Tuowen Zhao <[email protected]> Acked-by: Mika Westerberg <[email protected]> Acked-by: Andy Shevchenko <[email protected]> Tested-by: Roman Gilg <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11lib: devres: add a helper function for ioremap_ucTuowen Zhao2-0/+21
Implement a resource managed strongly uncachable ioremap function. Cc: <[email protected]> # v4.19+ Tested-by: AceLan Kao <[email protected]> Signed-off-by: Tuowen Zhao <[email protected]> Acked-by: Mika Westerberg <[email protected]> Acked-by: Andy Shevchenko <[email protected]> Acked-by: Luis Chamberlain <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-11-11sparc64: implement ioremap_ucTuowen Zhao1-0/+1
On sparc64, the whole physical IO address space is accessible using physically addressed loads and stores. *_uc does nothing like the others. Cc: <[email protected]> # v4.19+ Reported-by: kbuild test robot <[email protected]> Signed-off-by: Tuowen Zhao <[email protected]> Acked-by: David S. Miller <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-10-24MAINTAINERS: add Mediatek shutdown driversJosef Friedl1-0/+7
add Section in MAINTAINERS file for poweroff driver Signed-off-by: Josef Friedl <[email protected]> Signed-off-by: Frank Wunderlich <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-10-24power: reset: add driver for mt6323 poweroffJosef Friedl3-0/+108
add poweroff driver for mt6323 and make Makefile and Kconfig-Entries Suggested-by: Frank Wunderlich <[email protected]> Signed-off-by: Josef Friedl <[email protected]> Signed-off-by: Frank Wunderlich <[email protected]> Acked-by: Sebastian Reichel <[email protected]> Acked-by: Sean Wang <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-10-24rtc: mt6397: add compatible for mt6323Josef Friedl1-0/+1
use mt6397 rtc driver also for mt6323 but with different base/size see "mfd: mt6323: add mt6323 rtc+pwrc" Signed-off-by: Josef Friedl <[email protected]> Signed-off-by: Frank Wunderlich <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-10-24rtc: mt6397: improvements of rtc driverJosef Friedl1-32/+19
- use regmap_read_poll_timeout to drop while-loop - use devm-api to drop remove-callback Suggested-by: Alexandre Belloni <[email protected]> Signed-off-by: Josef Friedl <[email protected]> Signed-off-by: Frank Wunderlich <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-10-24rtc: mt6397: move some common definitions into rtc.hJosef Friedl2-54/+72
move code to separate header-file to reuse definitions later in poweroff-driver (drivers/power/reset/mt6323-poweroff.c) Suggested-by: Frank Wunderlich <[email protected]> Signed-off-by: Josef Friedl <[email protected]> Signed-off-by: Frank Wunderlich <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-10-24dt-bindings: rtc: mediatek: add missing mt6397 rtcJosef Friedl1-0/+29
add missing devicetree-binding document for mt6397 rtc in later patch driver is extended with mt6323 chip Suggested-By: Alexandre Belloni <[email protected]> Signed-off-by: Josef Friedl <[email protected]> Signed-off-by: Frank Wunderlich <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2019-09-30Linux 5.4-rc1Linus Torvalds1-2/+2
2019-09-30Merge tag 'for-5.4-rc1-tag' of ↵Linus Torvalds5-18/+58
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A bunch of fixes that accumulated in recent weeks, mostly material for stable. Summary: - fix for regression from 5.3 that prevents to use balance convert with single profile - qgroup fixes: rescan race, accounting leak with multiple writers, potential leak after io failure recovery - fix for use after free in relocation (reported by KASAN) - other error handling fixups" * tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space btrfs: Fix a regression which we can't convert to SINGLE profile btrfs: relocation: fix use-after-free on dead relocation roots Btrfs: fix race setting up and completing qgroup rescan workers Btrfs: fix missing error return if writeback for extent buffer never started btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer Btrfs: fix selftests failure due to uninitialized i_mode in test inodes
2019-09-30Merge tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds17-212/+291
Pull csky updates from Guo Ren: "This round of csky subsystem just some fixups: - Fix mb() synchronization problem - Fix dma_alloc_coherent with PAGE_SO attribute - Fix cache_op failed when cross memory ZONEs - Optimize arch_sync_dma_for_cpu/device with dma_inv_range - Fix ioremap function losing - Fix arch_get_unmapped_area() implementation - Fix defer cache flush for 610 - Support kernel non-aligned access - Fix 610 vipt cache flush mechanism - Fix add zero_fp fixup perf backtrace panic - Move static keyword to the front of declaration - Fix csky_pmu.max_period assignment - Use generic free_initrd_mem() - entry: Remove unneeded need_resched() loop" * tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux: csky: Move static keyword to the front of declaration csky: entry: Remove unneeded need_resched() loop csky: Fixup csky_pmu.max_period assignment csky: Fixup add zero_fp fixup perf backtrace panic csky: Use generic free_initrd_mem() csky: Fixup 610 vipt cache flush mechanism csky: Support kernel non-aligned access csky: Fixup defer cache flush for 610 csky: Fixup arch_get_unmapped_area() implementation csky: Fixup ioremap function losing csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range csky/dma: Fixup cache_op failed when cross memory ZONEs csky: Fixup dma_alloc_coherent with PAGE_SO attribute csky: Fixup mb() synchronization problem
2019-09-30Merge tag 'armsoc-fixes' of ↵Linus Torvalds9-81/+66
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A few fixes that have trickled in through the merge window: - Video fixes for OMAP due to panel-dpi driver removal - Clock fixes for OMAP that broke no-idle quirks + nfsroot on DRA7 - Fixing arch version on ASpeed ast2500 - Two fixes for reset handling on ARM SCMI" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: aspeed: ast2500 is ARMv6K reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks
2019-09-30Merge tag 'trace-v5.4-3' of ↵Linus Torvalds5-11/+30
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "A few more tracing fixes: - Fix a buffer overflow by checking nr_args correctly in probes - Fix a warning that is reported by clang - Fix a possible memory leak in error path of filter processing - Fix the selftest that checks for failures, but wasn't failing - Minor clean up on call site output of a memory trace event" * tag 'trace-v5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: selftests/ftrace: Fix same probe error test mm, tracing: Print symbol name for call_site in trace events tracing: Have error path in predicate_parse() free its allocated memory tracing: Fix clang -Wint-in-bool-context warnings in IF_ASSIGN macro tracing/probe: Fix to check the difference of nr_args before adding probe
2019-09-30Merge tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds9-35/+410
Pull more MMC updates from Ulf Hansson: "A couple more updates/fixes for MMC: - sdhci-pci: Add Genesys Logic GL975x support - sdhci-tegra: Recover loss in throughput for DMA - sdhci-of-esdhc: Fix DMA bug" * tag 'mmc-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: host: sdhci-pci: Add Genesys Logic GL975x support mmc: tegra: Implement ->set_dma_mask() mmc: sdhci: Let drivers define their DMA mask mmc: sdhci-of-esdhc: set DMA snooping based on DMA coherence mmc: sdhci: improve ADMA error reporting
2019-09-30csky: Move static keyword to the front of declarationKrzysztof Wilczynski1-1/+1
Move the static keyword to the front of declaration of csky_pmu_of_device_ids, and resolve the following compiler warning that can be seen when building with warnings enabled (W=1): arch/csky/kernel/perf_event.c:1340:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] Signed-off-by: Krzysztof Wilczynski <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2019-09-30csky: entry: Remove unneeded need_resched() loopValentin Schneider1-4/+0
Since the enabling and disabling of IRQs within preempt_schedule_irq() is contained in a need_resched() loop, we don't need the outer arch code loop. Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2019-09-29Merge tag 'char-misc-5.4-rc1' of ↵Linus Torvalds1-8/+34
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull Documentation/process update from Greg KH: "Here are two small Documentation/process/embargoed-hardware-issues.rst file updates that missed my previous char/misc pull request. The first one adds an Intel representative for the process, and the second one cleans up the text a bit more when it comes to how the disclosure rules work, as it was a bit confusing to some companies" * tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Documentation/process: Clarify disclosure rules Documentation/process: Volunteer as the ambassador for Intel
2019-09-29Merge branch 'work.misc' of ↵Linus Torvalds4-10/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more vfs updates from Al Viro: "A couple of misc patches" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs dynroot: switch to simple_dir_operations fs/handle.c - fix up kerneldoc
2019-09-29Merge tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds14-26/+194
Pull more cifs updates from Steve French: "Fixes from the recent SMB3 Test events and Storage Developer Conference (held the last two weeks). Here are nine smb3 patches including an important patch for debugging traces with wireshark, with three patches marked for stable. Additional fixes from last week to better handle some newly discovered reparse points, and a fix the create/mkdir path for setting the mode more atomically (in SMB3 Create security descriptor context), and one for path name processing are still being tested so are not included here" * tag '5.4-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Fix oplock handling for SMB 2.1+ protocols smb3: missing ACL related flags smb3: pass mode bits into create calls smb3: Add missing reparse tags CIFS: fix max ea value size fs/cifs/sess.c: Remove set but not used variable 'capabilities' fs/cifs/smb2pdu.c: Make SMB2_notify_init static smb3: fix leak in "open on server" perf counter smb3: allow decryption keys to be dumped by admin for debugging
2019-09-30csky: Fixup csky_pmu.max_period assignmentMao Han1-1/+1
The csky_pmu.max_period has type u64, and BIT() can only return 32 bits unsigned long on C-SKY. The initialization for max_period will be incorrect when count_width is bigger than 32. Use BIT_ULL() Signed-off-by: Mao Han <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2019-09-30csky: Fixup add zero_fp fixup perf backtrace panicGuo Ren2-21/+31
We need set fp zero to let backtrace know the end. The patch fixup perf callchain panic problem, because backtrace didn't know what is the end of fp. Signed-off-by: Guo Ren <[email protected]> Reported-by: Mao Han <[email protected]>
2019-09-30csky: Use generic free_initrd_mem()Mike Rapoport1-16/+0
The csky implementation of free_initrd_mem() is an open-coded version of free_reserved_area() without poisoning. Remove it and make csky use the generic version of free_initrd_mem(). Signed-off-by: Mike Rapoport <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2019-09-29Merge branch 'entropy'Linus Torvalds2-1/+64
Merge active entropy generation updates. This is admittedly partly "for discussion". We need to have a way forward for the boot time deadlocks where user space ends up waiting for more entropy, but no entropy is forthcoming because the system is entirely idle just waiting for something to happen. While this was triggered by what is arguably a user space bug with GDM/gnome-session asking for secure randomness during early boot, when they didn't even need any such truly secure thing, the issue ends up being that our "getrandom()" interface is prone to that kind of confusion, because people don't think very hard about whether they want to block for sufficient amounts of entropy. The approach here-in is to decide to not just passively wait for entropy to happen, but to start actively collecting it if it is missing. This is not necessarily always possible, but if the architecture has a CPU cycle counter, there is a fair amount of noise in the exact timings of reasonably complex loads. We may end up tweaking the load and the entropy estimates, but this should be at least a reasonable starting point. As part of this, we also revert the revert of the ext4 IO pattern improvement that ended up triggering the reported lack of external entropy. * getrandom() active entropy waiting: Revert "Revert "ext4: make __ext4_get_inode_loc plug"" random: try to actively add entropy rather than passively wait for it
2019-09-29Revert "Revert "ext4: make __ext4_get_inode_loc plug""Linus Torvalds1-0/+3
This reverts commit 72dbcf72156641fde4d8ea401e977341bfd35a05. Instead of waiting forever for entropy that may just not happen, we now try to actively generate entropy when required, and are thus hopefully avoiding the problem that caused the nice ext4 IO pattern fix to be reverted. So revert the revert. Cc: Ahmed S. Darwish <[email protected]> Cc: Ted Ts'o <[email protected]> Cc: Willy Tarreau <[email protected]> Cc: Alexander E. Patrakov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-09-29random: try to actively add entropy rather than passively wait for itLinus Torvalds1-1/+61
For 5.3 we had to revert a nice ext4 IO pattern improvement, because it caused a bootup regression due to lack of entropy at bootup together with arguably broken user space that was asking for secure random numbers when it really didn't need to. See commit 72dbcf721566 (Revert "ext4: make __ext4_get_inode_loc plug"). This aims to solve the issue by actively generating entropy noise using the CPU cycle counter when waiting for the random number generator to initialize. This only works when you have a high-frequency time stamp counter available, but that's the case on all modern x86 CPU's, and on most other modern CPU's too. What we do is to generate jitter entropy from the CPU cycle counter under a somewhat complex load: calling the scheduler while also guaranteeing a certain amount of timing noise by also triggering a timer. I'm sure we can tweak this, and that people will want to look at other alternatives, but there's been a number of papers written on jitter entropy, and this should really be fairly conservative by crediting one bit of entropy for every timer-induced jump in the cycle counter. Not because the timer itself would be all that unpredictable, but because the interaction between the timer and the loop is going to be. Even if (and perhaps particularly if) the timer actually happens on another CPU, the cacheline interaction between the loop that reads the cycle counter and the timer itself firing is going to add perturbations to the cycle counter values that get mixed into the entropy pool. As Thomas pointed out, with a modern out-of-order CPU, even quite simple loops show a fair amount of hard-to-predict timing variability even in the absense of external interrupts. But this tries to take that further by actually having a fairly complex interaction. This is not going to solve the entropy issue for architectures that have no CPU cycle counter, but it's not clear how (and if) that is solvable, and the hardware in question is largely starting to be irrelevant. And by doing this we can at least avoid some of the even more contentious approaches (like making the entropy waiting time out in order to avoid the possibly unbounded waiting). Cc: Ahmed Darwish <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Theodore Ts'o <[email protected]> Cc: Nicholas Mc Guire <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Kees Cook <[email protected]> Cc: Willy Tarreau <[email protected]> Cc: Alexander E. Patrakov <[email protected]> Cc: Lennart Poettering <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-09-29Merge tag 'fixes-5.4-merge-window' of ↵Olof Johansson6-79/+64
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants Few fixes for ti-sysc interconnect target module driver for no-idle quirks that caused nfsroot to fail on some dra7 boards. And let's fixes to get LCD working again for logicpd board that got broken a while back with removal of panel-dpi driver. We need to now use generic CONFIG_DRM_PANEL_SIMPLE instead. * tag 'fixes-5.4-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Remove unpaired sysc_clkdm_deny_idle() ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux ARM: dts: am3517-evm: Fix missing video ARM: dts: logicpd-torpedo-baseboard: Fix missing video ARM: omap2plus_defconfig: Fix missing video bus: ti-sysc: Fix handling of invalid clocks bus: ti-sysc: Fix clock handling for no-idle quirks Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2019-09-29Merge tag 'scmi-fixes-5.4' of ↵Olof Johansson17-202/+982
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes ARM SCMI fixes for v5.4 Couple of fixes: one in scmi reset driver initialising missed scmi handle and an other in scmi reset API implementation fixing the assignment of reset state * tag 'scmi-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: reset: reset-scmi: add missing handle initialisation firmware: arm_scmi: reset: fix reset_state assignment in scmi_domain_reset Link: https://lore.kernel.org/r/20190918142139.GA4370@bogus Signed-off-by: Olof Johansson <[email protected]>
2019-09-29Merge tag 'libnvdimm-fixes-5.4-rc1' of ↵Linus Torvalds15-51/+110
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm More libnvdimm updates from Dan Williams: - Complete the reworks to interoperate with powerpc dynamic huge page sizes - Fix a crash due to missed accounting for the powerpc 'struct page'-memmap mapping granularity - Fix badblock initialization for volatile (DRAM emulated) pmem ranges - Stop triggering request_key() notifications to userspace when NVDIMM-security is disabled / not present - Miscellaneous small fixups * tag 'libnvdimm-fixes-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/region: Enable MAP_SYNC for volatile regions libnvdimm: prevent nvdimm from requesting key when security is disabled libnvdimm/region: Initialize bad block for volatile namespaces libnvdimm/nfit_test: Fix acpi_handle redefinition libnvdimm/altmap: Track namespace boundaries in altmap libnvdimm: Fix endian conversion issues  libnvdimm/dax: Pick the right alignment default when creating dax devices powerpc/book3s64: Export has_transparent_hugepage() related functions.
2019-09-29Merge branch 'linus' of ↵Linus Torvalds5-463/+114
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal SoC updates from Eduardo Valentin: "This is a really small pull in the midst of a lot of pending patches. We are in the middle of restructuring how we are maintaining the thermal subsystem, as per discussion in our last LPC. For now, I am sending just some changes that were pending in my tree. Looking forward to get a more streamlined process in the next merge window" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: db8500: Rewrite to be a pure OF sensor thermal: db8500: Use dev helper variable thermal: db8500: Finalize device tree conversion thermal: thermal_mmio: remove some dead code
Powered by cgit, Gruvboxed by Blaster4385.