| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
The driver could possibly sleep while in atomic context resulting
in the following call trace while CONFIG_DEBUG_ATOMIC_SLEEP=y is
set:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2817, name: bash
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
Call Trace:
<TASK>
dump_stack_lvl+0x36/0x50
__might_resched+0x123/0x170
mutex_lock+0x1e/0x50
pds_vfio_put_lm_file+0x1e/0xa0 [pds_vfio_pci]
pds_vfio_put_save_file+0x19/0x30 [pds_vfio_pci]
pds_vfio_state_mutex_unlock+0x2e/0x80 [pds_vfio_pci]
pci_reset_function+0x4b/0x70
reset_store+0x5b/0xa0
kernfs_fop_write_iter+0x137/0x1d0
vfs_write+0x2de/0x410
ksys_write+0x5d/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
This can happen if pds_vfio_put_restore_file() and/or
pds_vfio_put_save_file() grab the mutex_lock(&lm_file->lock)
while the spin_lock(&pds_vfio->reset_lock) is held, which can
happen during while calling pds_vfio_state_mutex_unlock().
Fix this by changing the reset_lock to reset_mutex so there are no such
conerns. Also, make sure to destroy the reset_mutex in the driver specific
VFIO device release function.
This also fixes a spinlock bad magic BUG that was caused
by not calling spinlock_init() on the reset_lock. Since, the lock is
being changed to a mutex, make sure to call mutex_init() on it.
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/kvm/[email protected]/
Fixes: bb500dbe2ac6 ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>
|
|
The following BUG was found when running on a kernel with
CONFIG_DEBUG_MUTEXES=y set:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
RIP: 0010:mutex_trylock+0x10d/0x120
Call Trace:
<TASK>
? __warn+0x85/0x140
? mutex_trylock+0x10d/0x120
? report_bug+0xfc/0x1e0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? mutex_trylock+0x10d/0x120
? mutex_trylock+0x10d/0x120
pds_vfio_reset+0x3a/0x60 [pds_vfio_pci]
pci_reset_function+0x4b/0x70
reset_store+0x5b/0xa0
kernfs_fop_write_iter+0x137/0x1d0
vfs_write+0x2de/0x410
ksys_write+0x5d/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
As shown, lock->magic != lock. This is because
mutex_init(&pds_vfio->state_mutex) is called in the VFIO open path. So,
if a reset is initiated before the VFIO device is opened the mutex will
have never been initialized. Fix this by calling
mutex_init(&pds_vfio->state_mutex) in the VFIO init path.
Also, don't destroy the mutex on close because the device may
be re-opened, which would cause mutex to be uninitialized. Fix this by
implementing a driver specific vfio_device_ops.release callback that
destroys the mutex before calling vfio_pci_core_release_dev().
Fixes: bb500dbe2ac6 ("vfio/pds: Add VFIO live migration support")
Signed-off-by: Brett Creeley <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alex Williamson <[email protected]>
|
|
When looking up DMIC blob from the NHLT table and the format is 32 bits,
ignore the vbps matching for 32 bps for DMIC since some NHLT table have
the vbps as 24, some have it as 32.
The DMIC hardware supports only one type of 32 bit sample size, which is
24 bit sampling on the MSB side and bits[1:0] is used for indicating the
channel number.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Export device_is_dependent() since the drm_kms_helper module is starting
to use it.
Signed-off-by: Liu Ying <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
io_sqes_map() is used rather than io_mem_alloc(), if the application
passes in memory for mapping rather than have the kernel allocate it and
then mmap(2) the ranges. This then calls __io_uaddr_map() to perform the
page mapping and pinning, which checks if we end up with the same pages,
if more than one page is mapped. But this check is incorrect and only
checks if the first and last pages are the same, where it really should
be checking if the mapped pages are contigous. This allows mapping a
single normal page, or a huge page range.
Down the line we can add support for remapping pages to be virtually
contigous, which is really all that io_uring cares about.
Cc: [email protected]
Fixes: 03d89a2de25b ("io_uring: support for user allocated memory for rings/sqes")
Reported-by: Jann Horn <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
It was a mistake to prefer polling based mode when setting a performance
level for a domain. Let's instead rely on the protocol to decide what is
best and thus avoid polling when possible.
Reported-by: Nikunj Kela <[email protected]>
Fixes: 2af23ceb8624 ("pmdomain: arm: Add the SCMI performance domain")
Signed-off-by: Ulf Hansson <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Clang static analyzer complains that value stored to 'rets' is never
read.Let 'buf_len = -EOVERFLOW' to make sure we can return '-EOVERFLOW'.
Fixes: 8c8d964ce90f ("mei: move hbuf_depth from the mei device to the hw modules")
Signed-off-by: Su Hui <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
mei_msg_hdr_init() return negative error code, rets should be
'PTR_ERR(mei_hdr)' rather than '-PTR_ERR(mei_hdr)'.
Fixes: 0cd7c01a60f8 ("mei: add support for mei extended header.")
Signed-off-by: Su Hui <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
mei_pxp_send_message() should return zero on success and
cannot propagate number of bytes as returned by internally
called mei_cldev_send().
Fixes: ee5cb39348e6 ("mei: pxp: recover from recv fail under memory pressure")
Signed-off-by: Alexander Usyskin <[email protected]>
Signed-off-by: Tomas Winkler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The debugfs files for netdevs (sdata) and links are removed
with the wiphy mutex held, which may deadlock. Use the new
wiphy locked debugfs to avoid that.
Signed-off-by: Johannes Berg <[email protected]>
|
|
The read is currently with RCU and the write can deadlock,
convert both for the sake of illustration.
Make mac80211 depend on cfg80211 debugfs to get the helpers,
but mac80211 debugfs without it does nothing anyway. This
also required some adjustments in ath9k.
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add wrappers for debugfs files that should be called with
the wiphy mutex held, while the file is also to be removed
under the wiphy mutex. This could otherwise deadlock when
a file is trying to acquire the wiphy mutex while the code
removing it holds the mutex but waits for the removal.
This actually works by pushing the execution of the read
or write handler to a wiphy work that can be cancelled
using the debugfs cancellation API.
Signed-off-by: Johannes Berg <[email protected]>
|
|
In some cases there might be longer-running hardware accesses
in debugfs files, or attempts to acquire locks, and we want
to still be able to quickly remove the files.
Introduce a cancellations API to use inside the debugfs handler
functions to be able to cancel such operations on a per-file
basis.
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
When you take a lock in a debugfs handler but also try
to remove the debugfs file under that lock, things can
deadlock since the removal has to wait for all users
to finish.
Add lockdep annotations in debugfs_file_get()/_put()
to catch such issues.
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
debugfs_create_automount() stores a function pointer in d_fsdata,
but since commit 7c8d469877b1 ("debugfs: add support for more
elaborate ->d_fsdata") debugfs_release_dentry() will free it, now
conditionally on DEBUGFS_FSDATA_IS_REAL_FOPS_BIT, but that's not
set for the function pointer in automount. As a result, removing
an automount dentry would attempt to free the function pointer.
Luckily, the only user of this (tracing) never removes it.
Nevertheless, it's safer if we just handle the fsdata in one way,
namely either DEBUGFS_FSDATA_IS_REAL_FOPS_BIT or allocated. Thus,
change the automount to allocate it, and use the real_fops in the
data to indicate whether or not automount is filled, rather than
adding a type tag. At least for now this isn't actually needed,
but the next changes will require it.
Also check in debugfs_file_get() that it gets only called
on regular files, just to make things clearer.
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
|
|
Fix the following warning:
drivers/iommu/intel/iommu.c:302:30: warning: symbol
'intel_dirty_ops' was not declared. Should it be static?
This variable is only used in its defining file, so it should be static.
Fixes: f35f22cc760e ("iommu/vt-d: Access/Dirty bit support for SS domains")
Signed-off-by: Kunwu Chan <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Joao Martins <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Commit 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when
invalidating TLBs") moved the secondary TLB invalidations into the TLB
invalidation functions to ensure that all secondary TLB invalidations
happen at the same time as the CPU invalidation and added a flush-all
type of secondary TLB invalidation for the batched mode, where a range
of [0, -1UL) is used to indicates that the range extends to the end of
the address space.
However, using an end address of -1UL caused an overflow in the Intel
IOMMU driver, where the end address was rounded up to the next page.
As a result, both the IOTLB and device ATC were not invalidated correctly.
Add a flush all helper function and call it when the invalidation range
is from 0 to -1UL, ensuring that the entire caches are invalidated
correctly.
Fixes: 6bbd42e2df8f ("mmu_notifiers: call invalidate_range() when invalidating TLBs")
Cc: [email protected]
Cc: Huang Ying <[email protected]>
Cc: Alistair Popple <[email protected]>
Tested-by: Luo Yuzhang <[email protected]> # QAT
Tested-by: Tony Zhu <[email protected]> # DSA
Reviewed-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Alistair Popple <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
The VT-d spec requires (10.4.4 Global Command Register, TE field) that:
Hardware implementations supporting DMA draining must drain any in-flight
DMA read/write requests queued within the Root-Complex before switching
address translation on or off and reflecting the status of the command
through the TES field in the Global Status register.
Unfortunately, some integrated graphic devices fail to do so after some
kind of power state transition. As the result, the system might stuck in
iommu_disable_translation(), waiting for the completion of TE transition.
Add MTL to the quirk list for those devices and skips TE disabling if the
qurik hits.
Fixes: b1012ca8dc4f ("iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu")
Cc: [email protected]
Signed-off-by: Abdul Halim, Mohd Syazwan <[email protected]>
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
In the iommu probe_device path, domain_context_mapping() allows setting
up the context entry for a non-PCI device. However, in the iommu
release_device path, domain_context_clear() only clears context entries
for PCI devices.
Make domain_context_clear() behave consistently with
domain_context_mapping() by clearing context entries for both PCI and
non-PCI devices.
Fixes: 579305f75d34 ("iommu/vt-d: Update to use PCI DMA aliases")
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
When IOMMU hardware operates in legacy mode, the TT field of the context
entry determines the translation type, with three supported types (Section
9.3 Context Entry):
- DMA translation without device TLB support
- DMA translation with device TLB support
- Passthrough mode with translated and translation requests blocked
Device TLB support is absent when hardware is configured in passthrough
mode.
Disable the PCI ATS feature when IOMMU is configured for passthrough
translation type in legacy (non-scalable) mode.
Fixes: 0faa19a1515f ("iommu/vt-d: Decouple PASID & PRI enabling from SVA")
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
The latest VT-d spec indicates that when remapping hardware is disabled
(TES=0 in Global Status Register), upstream ATS Invalidation Completion
requests are treated as UR (Unsupported Request).
Consequently, the spec recommends in section 4.3 Handling of Device-TLB
Invalidations that software refrain from submitting any Device-TLB
invalidation requests when address remapping hardware is disabled.
Verify address remapping hardware is enabled prior to submitting Device-
TLB invalidation requests.
Fixes: 792fb43ce2c9 ("iommu/vt-d: Enable Intel IOMMU scalable mode by default")
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
The enforce_cache_coherency callback ensures DMA cache coherency for
devices attached to the domain.
Intel IOMMU supports enforced DMA cache coherency when the Snoop
Control bit in the IOMMU's extended capability register is set.
Supporting it differs between legacy and scalable modes.
In legacy mode, it's supported page-level by setting the SNP field
in second-stage page-table entries. In scalable mode, it's supported
in PASID-table granularity by setting the PGSNP field in PASID-table
entries.
In legacy mode, mappings before attaching to a device have SNP
fields cleared, while mappings after the callback have them set.
This means partial DMAs are cache coherent while others are not.
One possible fix is replaying mappings and flipping SNP bits when
attaching a domain to a device. But this seems to be over-engineered,
given that all real use cases just attach an empty domain to a device.
To meet practical needs while reducing mode differences, only support
enforce_cache_coherency on a domain without mappings if SNP field is
used.
Fixes: fc0051cb9590 ("iommu/vt-d: Check domain force_snooping against attached devices")
Signed-off-by: Lu Baolu <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Build is broken if CONFIG_DEBUG_BUGVERBOSE=n.
Fix it be using the correct asm operand number.
Signed-off-by: Helge Deller <[email protected]>
Reported-by: Linux Kernel Functional Testing <[email protected]>
Fixes: fe76a1349f23 ("parisc: Use natural CPU alignment for bug_table")
Cc: [email protected] # v6.0+
|
|
It turns out there are more subtle races beyond just the main part of
__iommu_probe_device() itself running in parallel - the dev_iommu_free()
on the way out of an unsuccessful probe can still manage to trip up
concurrent accesses to a device's fwspec. Thus, extend the scope of
iommu_probe_device_lock() to also serialise fwspec creation and initial
retrieval.
Reported-by: Zhenhua Huang <[email protected]>
Link: https://lore.kernel.org/linux-iommu/[email protected]/
Fixes: 01657bc14a39 ("iommu: Avoid races around device probe")
Signed-off-by: Robin Murphy <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: André Draszik <[email protected]>
Tested-by: André Draszik <[email protected]>
Link: https://lore.kernel.org/r/16f433658661d7cadfea51e7c65da95826112a2b.1700071477.git.robin.murphy@arm.com
Cc: [email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
For historical reasons the 'QUALCOMM IOMMU' entry lists only one
Qualcomm IOMMU driver. However there are also the historical MSM IOMMU
driver, which is used for old 32-bit platforms, and the
Qualcomm-specific customisations for the generic ARM SMMU driver. List
all these files under the QUALCOMM IOMMU entry.
Signed-off-by: Dmitry Baryshkov <[email protected]>
Acked-by: Will Deacon <[email protected]>
Acked-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Most of the calling code now has error handling that can carry an error
code further up the call chain. Keep the exported interface
iommu_domain_alloc() returning NULL and reflow the internal code to use
ERR_PTR not NULL for domain allocation failure.
Optionally allow drivers to return ERR_PTR from any of the alloc ops. Many
of the new ops (user, sva, etc) already return ERR_PTR, so having two
rules is confusing and hard on drivers. This fixes a bug in DART that was
returning ERR_PTR.
Fixes: 482feb5c6492 ("iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()")
Reported-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/linux-iommu/[email protected]/
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Jerry Snitselaar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt::
"Eventfs fixes:
- With the usage of simple_recursive_remove() recommended by Al Viro,
the code should not be calling "d_invalidate()" itself. Doing so is
causing crashes. The code was calling d_invalidate() on the race of
trying to look up a file while the parent was being deleted. This
was detected, and the added dentry was having d_invalidate() called
on it, but the deletion of the directory was also calling
d_invalidate() on that same dentry.
- A fix to not free the eventfs_inode (ei) until the last dput() was
called on its ei->dentry made the ei->dentry exist even after it
was marked for free by setting the ei->is_freed. But code elsewhere
still was checking if ei->dentry was NULL if ei->is_freed is set
and would trigger WARN_ON if that was the case. That's no longer
true and there should not be any warnings when it is true.
- Use GFP_NOFS for allocations done under eventfs_mutex. The
eventfs_mutex can be taken on file system reclaim, make sure that
allocations done under that mutex do not trigger file system
reclaim.
- Clean up code by moving the taking of inode_lock out of the helper
functions and into where they are needed, and not use the parameter
to know to take it or not. It must always be held but some callers
of the helper function have it taken when they were called.
- Warn if the inode_lock is not held in the helper functions.
- Warn if eventfs_start_creating() is called without a parent. As
eventfs is underneath tracefs, all files created will have a parent
(the top one will have a tracefs parent).
Tracing update:
- Add Mathieu Desnoyers as an official reviewer of the tracing subsystem"
* tag 'trace-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: TRACING: Add Mathieu Desnoyers as Reviewer
eventfs: Make sure that parent->d_inode is locked in creating files/dirs
eventfs: Do not allow NULL parent to eventfs_start_creating()
eventfs: Move taking of inode_lock into dcache_dir_open_wrapper()
eventfs: Use GFP_NOFS for allocation when eventfs_mutex is held
eventfs: Do not invalidate dentry in create_file/dir_dentry()
eventfs: Remove expectation that ei->is_freed means ei->dentry == NULL
|
|
A regression was introduced in the Skov specific i.MX6 flavor
reve-mi1010ait-1cp1 device tree causing the external ethernet controller
to not being selected as the clock source for the i.MX6 ethernet MAC,
resulting in a none functional ethernet interface. The root cause is
that the ethernet clock selection is now part of the clocks node, which
is overwritten in the specific device tree and wasn't updated to contain
these ethernet clocks.
Fixes: c89614079e44 ("ARM: dts: imx6qdl-skov-cpu: configure ethernet reference clock parent")
Signed-off-by: Stefan Kerkmann <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
LPUART2_RTS# has an external pull-down, so do not enable the internal
pull-up at the same time, use a pull-down instead.
Fixes: c982ecfa7992a ("arm64: dts: freescale: add initial device tree for MBa93xxLA SBC board")
Signed-off-by: Alexander Stein <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
bpf_mem_cache_alloc_flags() may call __alloc() directly when there is no
free object in free list, but it doesn't initialize the allocation hint
for the returned pointer. It may lead to bad memory dereference when
freeing the pointer, so fix it by initializing the allocation hint.
Fixes: 822fb26bdb55 ("bpf: Add a hint to allocated objects.")
Signed-off-by: Hou Tao <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
"This patchset fixes and enforces correct section alignments for the
ex_table, altinstructions, parisc_unwind, jump_table and bug_table
which are created by inline assembly.
Due to not being correctly aligned at link & load time they can
trigger unnecessarily the kernel unaligned exception handler at
runtime. While at it, I switched the bug table to use relative
addresses which reduces the size of the table by half on 64-bit.
We still had the ENOSYM and EREMOTERELEASE errno symbols as left-overs
from HP-UX, which now trigger build-issues with glibc. We can simply
remove them.
Most of the patches are tagged for stable kernel series.
Summary:
- Drop HP-UX ENOSYM and EREMOTERELEASE return codes to avoid glibc
build issues
- Fix section alignments for ex_table, altinstructions, parisc unwind
table, jump_table and bug_table
- Reduce size of bug_table on 64-bit kernel by using relative
pointers"
* tag 'parisc-for-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Reduce size of the bug_table on 64-bit kernel by half
parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
parisc: Use natural CPU alignment for bug_table
parisc: Ensure 32-bit alignment on parisc unwind section
parisc: Mark lock_aligned variables 16-byte aligned on SMP
parisc: Mark jump_table naturally aligned
parisc: Mark altinstructions read-only and 32-bit aligned
parisc: Mark ex_table entries 32-bit aligned in uaccess.h
parisc: Mark ex_table entries 32-bit aligned in assembly.h
|
|
Commit ee708e6baacd ("iio: buffer: introduce support for attaching more
IIO buffers") introduced support for multiple buffers per indio_dev but
left indio_dev->buffer for a few legacy use cases.
In the case of the triggered buffer, iio_triggered_buffer_cleanup()
still assumes that indio_dev->buffer points to the buffer allocated by
iio_triggered_buffer_setup_ext(). However, since
iio_triggered_buffer_setup_ext() now calls iio_device_attach_buffer()
to attach the buffer, indio_dev->buffer will only point to the buffer
allocated by iio_device_attach_buffer() if it the first buffer attached.
This adds a check to make sure that no other buffer has been attached
yet to ensure that indio_dev->buffer will be assigned when
iio_device_attach_buffer() is called.
As per discussion in the review thread, we may want to deal with multiple
triggers per device, but this is a fix for the issue in the meantime and
any such support would be unlikely to be suitable for a backport.
Fixes: ee708e6baacd ("iio: buffer: introduce support for attaching more IIO buffers")
Signed-off-by: David Lechner <[email protected]>
Acked-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
inv_mpu6050_sensor_show() can return -EINVAL or IIO_VAL_INT. Return the
true value rather than only return IIO_VAL_INT.
Fixes: d5098447147c ("iio: imu: mpu6050: add calibration offset support")
Signed-off-by: Su Hui <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
assign_bit() expects a bit number and not a mask like BIT(x). Hence,
just remove the BIT() macro from the #defines.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Fixes: fff7352bf7a3ce ("iio: imu: Add support for adis16475")
Signed-off-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode fixes from Ingo Molnar:
"Fix/enhance x86 microcode version reporting: fix the bootup log spam,
and remove the driver version announcement to avoid version confusion
when distros backport fixes"
* tag 'x86-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Rework early revisions reporting
x86/microcode: Remove the driver announcement and version
|
|
This prevents the warning message "SPI driver has no spi_device_id for..."
when registering the driver. More importantly, it makes sure that
module autoloading works as spi relies on spi: modaliases and not of.
While at it, move the of_device_id table to it's natural place.
Fixes: fff7352bf7a3c ("iio: imu: Add support for adis16475")
Signed-off-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fix from Ingo Molnar:
"Fix a bug in the Intel hybrid CPUs hardware-capabilities enumeration
code resulting in non-working events on those platforms"
* tag 'perf-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Correct incorrect 'or' operation for PMU capabilities
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix lockdep block chain corruption resulting in KASAN warnings"
* tag 'locking-urgent-2023-11-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Fix block chain corruption
|
|
Pull smb client fixes from Steve French:
- use after free fix in releasing multichannel interfaces
- fixes for special file types (report char, block, FIFOs properly when
created e.g. by NFS to Windows)
- fixes for reporting various special file types and symlinks properly
when using SMB1
* tag '6.7-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: introduce cifs_sfu_make_node()
smb: client: set correct file type from NFS reparse points
smb: client: introduce ->parse_reparse_point()
smb: client: implement ->query_reparse_point() for SMB1
cifs: fix use after free for iface while disabling secondary channels
|
|
Ioana Ciornei says:
====================
dpaa2-eth: various fixes
The first patch fixes a memory corruption issue happening between the Tx
and Tx confirmation of a packet by making the Tx alignment at 64bytes
mandatory instead of optional as it was previously.
The second patch fixes the Rx copybreak code path which recycled the
initial data buffer before all processing was done on the packet.
Changes in v2:
- squashed patches #1 and #2
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The blamed commit added support for Rx copybreak. This meant that for
certain frame sizes, a new skb was allocated and the initial data buffer
was recycled. Instead of waiting to recycle the Rx buffer only after all
processing was done on it (like accessing the parse results or timestamp
information), the code path just went ahead and re-used the buffer right
away.
This sometimes lead to corrupted HW and SW annotation areas.
Fix this by delaying the moment when the buffer is recycled.
Fixes: 50f826999a80 ("dpaa2-eth: add rx copybreak support")
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Increase the needed headroom to account for a 64 byte alignment
restriction which, with this patch, we make mandatory on the Tx path.
The case in which the amount of headroom needed is not available is
already handled by the driver which instead sends a S/G frame with the
first buffer only holding the SW and HW annotation areas.
Without this patch, we can empirically see data corruption happening
between Tx and Tx confirmation which sometimes leads to the SW
annotation area being overwritten.
Since this is an old IP where the hardware team cannot help to
understand the underlying behavior, we make the Tx alignment mandatory
for all frames to avoid the crash on Tx conf. Also, remove the comment
that suggested that this is just an optimization.
This patch also sets the needed_headroom net device field to the usual
value that the driver would need on the Tx path:
- 64 bytes for the software annotation area
- 64 bytes to account for a 64 byte aligned buffer address
Fixes: 6e2387e8f19e ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver")
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The timebase-frequency on PolarFire SoC is not set by an oscillator on
the board, but rather by an internal divider, so move the property to
mpfs.dtsi.
This looks to be copy-pasta from the SiFive Unleashed as the comments
in both places were almost identical. In the Unleashed's case this looks
to actually be valid, as the clock is provided by a crystal on the PCB.
Signed-off-by: Conor Dooley <[email protected]>
---
CC: Conor Dooley <[email protected]>
CC: Daire McNamara <[email protected]>
CC: Rob Herring <[email protected]>
CC: Krzysztof Kozlowski <[email protected]>
CC: Paul Walmsley <[email protected]>
CC: Palmer Dabbelt <[email protected]>
CC: [email protected]
CC: [email protected]
|
|
As of commit b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for
phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer
de-reference like this example:
...
mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] ARM
Modules linked in:
CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty #26
Hardware name: Marvell Armada 370/XP (Device Tree)
Workqueue: events_unbound deferred_probe_work_func
PC is at mv88e6xxx_port_setup+0x1c/0x44
LR is at dsa_port_devlink_setup+0x74/0x154
pc : [<c057ea24>] lr : [<c0819598>] psr: a0000013
sp : c184fce0 ip : c542b8f4 fp : 00000000
r10: 00000001 r9 : c542a540 r8 : c542bc00
r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580
r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040
...
The Marvell 6350 switch has no SERDES interface and so has no
corresponding pcs_ops defined for it. But during probing a call is made
to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist -
though the presence of the pcs_ops->pcs_init function is optional.
Modify code to check for pcs_ops first, before checking for and calling
pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown
which may potentially suffer the same problem.
Fixes: b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs")
Signed-off-by: Greg Ungerer <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to
be filled") Marvell 88e6350 switches fail to be probed:
...
mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2
mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces
error creating PHYLINK: -22
mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22
...
The problem stems from the use of mv88e6185_phylink_get_caps() to get
the device capabilities. Create a new dedicated phylink_get_caps for the
6351 family (which the 6350 is one of) to properly support their set of
capabilities.
According to chip.h the 6351 switch family includes the 6171, 6175, 6350
and 6351 switches, so update each of these to use the correct
phylink_get_caps.
Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Greg Ungerer <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
bkey embeds a bpos that is misaligned on big endian; this is so that
bch2_bkey_swab() works correctly without having to differentiate between
packed and non-packed keys (a debatable design decision).
This means it can't have the __aligned() tag on big endian.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Durability of an erasure coded pointer doesn't add the device
durability; durability is the same for any extent in that stripe so the
calculation only comes from the stripe.
Signed-off-by: Kent Overstreet <[email protected]>
|