aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-06mm, hotplug: fix page online with DEBUG_PAGEALLOC compiled but not enabledVlastimil Babka2-1/+11
Commit cd02cf1aceea ("mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC") fixed memory hotplug with debug_pagealloc enabled, where onlining a page goes through page freeing, which removes the direct mapping. Some arches don't like when the page is not mapped in the first place, so generic_online_page() maps it first. This is somewhat wasteful, but better than special casing page freeing fast paths. The commit however missed that DEBUG_PAGEALLOC configured doesn't mean it's actually enabled. One has to test debug_pagealloc_enabled() since 031bc5743f15 ("mm/debug-pagealloc: make debug-pagealloc boottime configurable"), or alternatively debug_pagealloc_enabled_static() since 8e57f8acbbd1 ("mm, debug_pagealloc: don't rely on static keys too early"), but this is not done. As a result, a s390 kernel with DEBUG_PAGEALLOC configured but not enabled will crash: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:0000001ece13400b R2:000003fff7fd000b R3:000003fff7fcc007 S:000003fff7fd7000 P:000000000000013d Oops: 0004 ilc:2 [#1] SMP CPU: 1 PID: 26015 Comm: chmem Kdump: loaded Tainted: GX 5.3.18-5-default #1 SLE15-SP2 (unreleased) Krnl PSW : 0704e00180000000 0000001ecd281b9e (__kernel_map_pages+0x166/0x188) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000800 0000400b00000000 0000000000000100 0000000000000001 0000000000000000 0000000000000002 0000000000000100 0000001ece139230 0000001ecdd98d40 0000400b00000100 0000000000000000 000003ffa17e4000 001fffe0114f7d08 0000001ecd4d93ea 001fffe0114f7b20 Krnl Code: 0000001ecd281b8e: ec17ffff00d8 ahik %r1,%r7,-1 0000001ecd281b94: ec111dbc0355 risbg %r1,%r1,29,188,3 >0000001ecd281b9e: 94fb5006 ni 6(%r5),251 0000001ecd281ba2: 41505008 la %r5,8(%r5) 0000001ecd281ba6: ec51fffc6064 cgrj %r5,%r1,6,1ecd281b9e 0000001ecd281bac: 1a07 ar %r0,%r7 0000001ecd281bae: ec03ff584076 crj %r0,%r3,4,1ecd281a5e Call Trace: [<0000001ecd281b9e>] __kernel_map_pages+0x166/0x188 [<0000001ecd4d9516>] online_pages_range+0xf6/0x128 [<0000001ecd2a8186>] walk_system_ram_range+0x7e/0xd8 [<0000001ecda28aae>] online_pages+0x2fe/0x3f0 [<0000001ecd7d02a6>] memory_subsys_online+0x8e/0xc0 [<0000001ecd7add42>] device_online+0x5a/0xc8 [<0000001ecd7d0430>] state_store+0x88/0x118 [<0000001ecd5b9f62>] kernfs_fop_write+0xc2/0x200 [<0000001ecd5064b6>] vfs_write+0x176/0x1e0 [<0000001ecd50676a>] ksys_write+0xa2/0x100 [<0000001ecda315d4>] system_call+0xd8/0x2c8 Fix this by checking debug_pagealloc_enabled_static() before calling kernel_map_pages(). Backports for kernel before 5.5 should use debug_pagealloc_enabled() instead. Also add comments. Fixes: cd02cf1aceea ("mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC") Reported-by: Gerald Schaefer <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Vlastimil Babka <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Cc: <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: Qian Cai <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-03-06mm/z3fold.c: do not include rwlock.h directlySebastian Andrzej Siewior1-1/+0
rwlock.h should not be included directly. Instead linux/splinlock.h should be included. One thing it does is to break the RT build. Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Vitaly Wool <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-03-06fat: fix uninit-memory access for partial initialized inodeOGAWA Hirofumi1-12/+7
When get an error in the middle of reading an inode, some fields in the inode might be still not initialized. And then the evict_inode path may access those fields via iput(). To fix, this makes sure that inode fields are initialized. Reported-by: [email protected] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: OGAWA Hirofumi <[email protected]> Cc: <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-03-06mm: avoid data corruption on CoW fault into PFN-mapped VMAKirill A. Shutemov1-8/+27
Jeff Moyer has reported that one of xfstests triggers a warning when run on DAX-enabled filesystem: WARNING: CPU: 76 PID: 51024 at mm/memory.c:2317 wp_page_copy+0xc40/0xd50 ... wp_page_copy+0x98c/0xd50 (unreliable) do_wp_page+0xd8/0xad0 __handle_mm_fault+0x748/0x1b90 handle_mm_fault+0x120/0x1f0 __do_page_fault+0x240/0xd70 do_page_fault+0x38/0xd0 handle_page_fault+0x10/0x30 The warning happens on failed __copy_from_user_inatomic() which tries to copy data into a CoW page. This happens because of race between MADV_DONTNEED and CoW page fault: CPU0 CPU1 handle_mm_fault() do_wp_page() wp_page_copy() do_wp_page() madvise(MADV_DONTNEED) zap_page_range() zap_pte_range() ptep_get_and_clear_full() <TLB flush> __copy_from_user_inatomic() sees empty PTE and fails WARN_ON_ONCE(1) clear_page() The solution is to re-try __copy_from_user_inatomic() under PTL after checking that PTE is matches the orig_pte. The second copy attempt can still fail, like due to non-readable PTE, but there's nothing reasonable we can do about, except clearing the CoW page. Reported-by: Jeff Moyer <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Kirill A. Shutemov <[email protected]> Tested-by: Jeff Moyer <[email protected]> Cc: <[email protected]> Cc: Justin He <[email protected]> Cc: Dan Williams <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-03-06mm: fix possible PMD dirty bit lost in set_pmd_migration_entry()Huang Ying1-2/+1
In set_pmd_migration_entry(), pmdp_invalidate() is used to change PMD atomically. But the PMD is read before that with an ordinary memory reading. If the THP (transparent huge page) is written between the PMD reading and pmdp_invalidate(), the PMD dirty bit may be lost, and cause data corruption. The race window is quite small, but still possible in theory, so need to be fixed. The race is fixed via using the return value of pmdp_invalidate() to get the original content of PMD, which is a read/modify/write atomic operation. So no THP writing can occur in between. The race has been introduced when the THP migration support is added in the commit 616b8371539a ("mm: thp: enable thp migration in generic path"). But this fix depends on the commit d52605d7cb30 ("mm: do not lose dirty and accessed bits in pmdp_invalidate()"). So it's easy to be backported after v4.16. But the race window is really small, so it may be fine not to backport the fix at all. Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: "Huang, Ying" <[email protected]> Reviewed-by: Zi Yan <[email protected]> Reviewed-by: William Kucharski <[email protected]> Acked-by: Kirill A. Shutemov <[email protected]> Cc: <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Andrea Arcangeli <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-03-06mm, numa: fix bad pmd by atomically check for pmd_trans_huge when marking ↵Mel Gorman1-2/+36
page tables prot_numa : A user reported a bug against a distribution kernel while running a : proprietary workload described as "memory intensive that is not swapping" : that is expected to apply to mainline kernels. The workload is : read/write/modifying ranges of memory and checking the contents. They : reported that within a few hours that a bad PMD would be reported followed : by a memory corruption where expected data was all zeros. A partial : report of the bad PMD looked like : : [ 5195.338482] ../mm/pgtable-generic.c:33: bad pmd ffff8888157ba008(000002e0396009e2) : [ 5195.341184] ------------[ cut here ]------------ : [ 5195.356880] kernel BUG at ../mm/pgtable-generic.c:35! : .... : [ 5195.410033] Call Trace: : [ 5195.410471] [<ffffffff811bc75d>] change_protection_range+0x7dd/0x930 : [ 5195.410716] [<ffffffff811d4be8>] change_prot_numa+0x18/0x30 : [ 5195.410918] [<ffffffff810adefe>] task_numa_work+0x1fe/0x310 : [ 5195.411200] [<ffffffff81098322>] task_work_run+0x72/0x90 : [ 5195.411246] [<ffffffff81077139>] exit_to_usermode_loop+0x91/0xc2 : [ 5195.411494] [<ffffffff81003a51>] prepare_exit_to_usermode+0x31/0x40 : [ 5195.411739] [<ffffffff815e56af>] retint_user+0x8/0x10 : : Decoding revealed that the PMD was a valid prot_numa PMD and the bad PMD : was a false detection. The bug does not trigger if automatic NUMA : balancing or transparent huge pages is disabled. : : The bug is due a race in change_pmd_range between a pmd_trans_huge and : pmd_nond_or_clear_bad check without any locks held. During the : pmd_trans_huge check, a parallel protection update under lock can have : cleared the PMD and filled it with a prot_numa entry between the transhuge : check and the pmd_none_or_clear_bad check. : : While this could be fixed with heavy locking, it's only necessary to make : a copy of the PMD on the stack during change_pmd_range and avoid races. A : new helper is created for this as the check if quite subtle and the : existing similar helpful is not suitable. This passed 154 hours of : testing (usually triggers between 20 minutes and 24 hours) without : detecting bad PMDs or corruption. A basic test of an autonuma-intensive : workload showed no significant change in behaviour. Although Mel withdrew the patch on the face of LKML comment https://lkml.org/lkml/2017/4/10/922 the race window aforementioned is still open, and we have reports of Linpack test reporting bad residuals after the bad PMD warning is observed. In addition to that, bad rss-counter and non-zero pgtables assertions are triggered on mm teardown for the task hitting the bad PMD. host kernel: mm/pgtable-generic.c:40: bad pmd 00000000b3152f68(8000000d2d2008e7) .... host kernel: BUG: Bad rss-counter state mm:00000000b583043d idx:1 val:512 host kernel: BUG: non-zero pgtables_bytes on freeing mm: 4096 The issue is observed on a v4.18-based distribution kernel, but the race window is expected to be applicable to mainline kernels, as well. [[email protected]: fix comment typo, per Rafael] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Rafael Aquini <[email protected]> Signed-off-by: Mel Gorman <[email protected]> Cc: <[email protected]> Cc: Zi Yan <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Michal Hocko <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-03-06Merge tag 'devprop-5.6-rc5' of ↵Linus Torvalds1-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Revert a problematic commit from the 5.3 development cycle (Brendan Higgins)" * tag 'devprop-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "software node: Simplify software_node_release() function"
2020-03-06Merge tag 'acpi-5.6-rc5' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI documentation fix from Rafael Wysocki: "Fix Sphinx format warinings in an ACPI fan document added recently (Randy Dunlap)" * tag 'acpi-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Documentation/admin-guide/acpi: fix fan_performance_states.rst warnings
2020-03-06Merge tag 'drm-fixes-2020-03-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds38-212/+520
Pull drm fixes from Dave Airlie: "Weekly fixes round, looks like a few people woke up, got a bunch of fixes across the drivers. Bit bigger than I'd like but they all seem fine and hopefully it quiets down now. sun4i, kirin, mediatek and exynos on the ARM side. virtio-gpu and core have some mmap fixes, and there is a dma-buf leak. one ttm fence leak is also fixed. Otherwise it's mostly amdgpu and i915. One of the i915 fixes is for a very long latency I was seeing (using latencytop) running gnome-shell locally when using firefox and eating nearly all my RAM, it really helps with desktop responsiveness esp when firefox is chewing a lot. dma-buf: - fix memory leak core: - shmem object mmap fix. ttm: - Fix fence leak in ttm_buffer_object_transfer(). amdgpu: - Gfx reset fix for gfx9, 10 - Fix for gfx10 - DP MST fix - DCC fix - Renoir power fixes - Navi power fix i915: - Break up long lists of object reclaim with cond_resched() - PSR probe fix - TGL workarounds - Selftest return value fix - Drop timeline mutex while waiting for retirement - Wait for OA configuration completion before writes to OA buffer virtio: - Fix resource id creation race in virtio. - mmap fixes sun4i: - Fixes for sun4i VI layer format support. kirin: - kirin: Revert "Fix for hikey620 display offset problem" exynos: - fix a kernel oops problem in case that driver is loaded as module. - fix a regulator warning issue when I2C DDC adapter cannot be gathered. - print out an error message only in error case excepting -EPROBE_DEFER. mediatek: - overlay, cursor and gce fixes" ` * tag 'drm-fixes-2020-03-06' of git://anongit.freedesktop.org/drm/drm: (38 commits) drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume from s3 (v2) drm/amd/powerplay: map mclk to fclk for COMBINATIONAL_BYPASS case drm/amd/powerplay: fix pre-check condition for setting clock range drm/amd/display: fix dcc swath size calculations on dcn1 drm/amd/display: Clear link settings on MST disable connector drm/amdgpu: disable 3D pipe 1 on Navi1x drm/amdgpu: clean wptr on wb when gpu recovery drm: kirin: Revert "Fix for hikey620 display offset problem" drm/i915/gt: Drop the timeline->mutex as we wait for retirement drm/i915/perf: Reintroduce wait on OA configuration completion drm/sun4i: Fix DE2 VI layer format support drm/sun4i: Add separate DE3 VI layer formats drm/sun4i: de2/de3: Remove unsupported VI layer formats drm/i915/selftests: Fix return in assert_mmap_offset() drm/i915: Protect i915_request_await_start from early waits drm/i915/tgl: Add Wa_1608008084 drm/i915/tgl: Add Wa_22010178259:tgl drm/i915: Program MBUS with rmw during initialization drm/i915/psr: Force PSR probe only after full initialization drm/i915/gem: Break up long lists of object reclaim ...
2020-03-06tools: Fix off-by 1 relative directory includesIan Rogers12-72/+72
This is currently working due to extra include paths in the build. Committer testing: $ cd tools/include/uapi/asm/ Before this patch: $ ls -la ../../arch/x86/include/uapi/asm/errno.h ls: cannot access '../../arch/x86/include/uapi/asm/errno.h': No such file or directory $ After this patch; $ ls -la ../../../arch/x86/include/uapi/asm/errno.h -rw-rw-r--. 1 acme acme 31 Feb 20 12:42 ../../../arch/x86/include/uapi/asm/errno.h $ Check that that is still under tools/, i.e. hasn't escaped into the main kernel sources: $ cd ../../../arch/x86/include/uapi/asm/ $ pwd /home/acme/git/perf/tools/arch/x86/include/uapi/asm $ Signed-off-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexios Zavras <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Igor Lubashev <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Wei Li <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06perf jevents: Fix leak of mapfile memoryJohn Garry1-6/+9
The memory for global pointer is never freed during normal program execution, so let's do that in the main function exit as a good programming practice. A stray blank line is also removed. Reported-by: Jiri Olsa <[email protected]> Signed-off-by: John Garry <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: James Clark <[email protected]> Cc: Joakim Zhang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06perf bench: Clear struct sigaction before sigaction() syscallTommi Rantala7-0/+7
Avoid garbage in sigaction structs used in sigaction() syscalls. Valgrind is complaining about it. Signed-off-by: Tommi Rantala <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Changbin Du <[email protected]> Cc: Darren Hart <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06perf bench futex-wake: Restore thread count default to online CPU countTommi Rantala1-2/+2
Since commit 3b2323c2c1c4 ("perf bench futex: Use cpumaps") the default number of threads the benchmark uses got changed from number of online CPUs to zero: $ perf bench futex wake # Running 'futex/wake' benchmark: Run summary [PID 15930]: blocking on 0 threads (at [private] futex 0x558b8ee4bfac), waking up 1 at a time. [Run 1]: Wokeup 0 of 0 threads in 0.0000 ms [...] [Run 10]: Wokeup 0 of 0 threads in 0.0000 ms Wokeup 0 of 0 threads in 0.0004 ms (+-40.82%) Restore the old behavior by grabbing the number of online CPUs via cpu->nr: $ perf bench futex wake # Running 'futex/wake' benchmark: Run summary [PID 18356]: blocking on 8 threads (at [private] futex 0xb3e62c), waking up 1 at a time. [Run 1]: Wokeup 8 of 8 threads in 0.0260 ms [...] [Run 10]: Wokeup 8 of 8 threads in 0.0270 ms Wokeup 8 of 8 threads in 0.0419 ms (+-24.35%) Fixes: 3b2323c2c1c4 ("perf bench futex: Use cpumaps") Signed-off-by: Tommi Rantala <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Darren Hart <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06perf top: Fix stdio interface input handling with glibc 2.28+Tommi Rantala1-1/+3
Since glibc 2.28 when running 'perf top --stdio', input handling no longer works, but hitting any key always just prints the "Mapped keys" help text. To fix it, call clearerr() in the display_thread() loop to clear any EOF sticky errors, as instructed in the glibc NEWS file (https://sourceware.org/git/?p=glibc.git;a=blob;f=NEWS): * All stdio functions now treat end-of-file as a sticky condition. If you read from a file until EOF, and then the file is enlarged by another process, you must call clearerr or another function with the same effect (e.g. fseek, rewind) before you can read the additional data. This corrects a longstanding C99 conformance bug. It is most likely to affect programs that use stdio to read interactive input from a terminal. (Bug #1190.) Signed-off-by: Tommi Rantala <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06perf diff: Fix undefined string comparision spotted by clang's -Wstring-compareNick Desaulniers3-3/+5
clang warns: util/block-info.c:298:18: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:51: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:18: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/block-info.c:298:51: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if ((start_line != SRCLINE_UNKNOWN) && (end_line != SRCLINE_UNKNOWN)) { ^ ~~~~~~~~~~~~~~~ util/map.c:434:15: error: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Werror,-Wstring-compare] if (srcline != SRCLINE_UNKNOWN) ^ ~~~~~~~~~~~~~~~ Reviewer Notes: Looks good to me. Some more context: https://clang.llvm.org/docs/DiagnosticsReference.html#wstring-compare The spec says: J.1 Unspecified behavior The following are unspecified: .. Whether two string literals result in distinct arrays (6.4.5). Signed-off-by: Nick Desaulniers <[email protected]> Reviewed-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Changbin Du <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Keeping <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Cc: [email protected] Link: https://github.com/ClangBuiltLinux/linux/issues/900 Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-03-06ALSA: sgio2audio: Remove usage of dropped hw_params/hw_free functionsThomas Bogendoerfer1-6/+0
Commit ee88f4ebe575 ("ALSA: mips: Use managed buffer allocation") removed superfluous hw_params/hw_free callbacks, but forgot to remove them where they were used. Fixes: ee88f4ebe575 ("ALSA: mips: Use managed buffer allocation") Signed-off-by: Thomas Bogendoerfer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-03-06futex: Fix inode life-time issuePeter Zijlstra4-43/+65
As reported by Jann, ihold() does not in fact guarantee inode persistence. And instead of making it so, replace the usage of inode pointers with a per boot, machine wide, unique inode identifier. This sequence number is global, but shared (file backed) futexes are rare enough that this should not become a performance issue. Reported-by: Jann Horn <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
2020-03-06Merge branch 'acpi-doc'Rafael J. Wysocki1-2/+2
* acpi-doc: Documentation/admin-guide/acpi: fix fan_performance_states.rst warnings
2020-03-05mptcp: always include dack if possible.Paolo Abeni1-2/+17
Currently passive MPTCP socket can skip including the DACK option - if the peer sends data before accept() completes. The above happens because the msk 'can_ack' flag is set only after the accept() call. Such missing DACK option may cause - as per RFC spec - unwanted fallback to TCP. This change addresses the issue using the key material available in the current subflow, if any, to create a suitable dack option when msk ack seq is not yet available. v1 -> v2: - adavance the generated ack after the initial MPC packet Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-05net: nfc: fix bounds checking bugs on "pipe"Dan Carpenter1-3/+16
This is similar to commit 674d9de02aa7 ("NFC: Fix possible memory corruption when handling SHDLC I-Frame commands") and commit d7ee81ad09f0 ("NFC: nci: Add some bounds checking in nci_hci_cmd_received()") which added range checks on "pipe". The "pipe" variable comes skb->data[0] in nfc_hci_msg_rx_work(). It's in the 0-255 range. We're using it as the array index into the hdev->pipes[] array which has NFC_HCI_MAX_PIPES (128) members. Fixes: 118278f20aa8 ("NFC: hci: Add pipes table to reference them with a tuple {gate, host}") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-06drm/i915/gvt: Fix emulated vbt size issueTina Zhang1-3/+2
The emulated vbt doesn't tell its size correctly. According to the intel_vbt_defs.h, vbt_header.vbt_size should the size of VBT (VBT Header, BDB Header and data blocks), and bdb_header.bdb_size should be the size of BDB (BDB Header and data blocks). This patch fixes the issue and lets vbt provided by GVT-g pass the guest i915's sanity test. v2: refine the commit message. (Zhenyu) Signed-off-by: Tina Zhang <[email protected]> Reviewed-by: Zhenyu Wang <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-05veth: ignore peer tx_dropped when counting local rx_droppedJiang Lidong1-1/+1
When local NET_RX backlog is full due to traffic overrun, peer veth tx_dropped counter increases. At that time, list local veth stats, rx_dropped has double value of peer tx_dropped, even bigger than transmit packets by peer. In NET_RX softirq process, if any packet drop case happens, it increases dev's rx_dropped counter and returns NET_RX_DROP. At veth tx side, it records any error returned from peer netif_rx into local dev tx_dropped counter. In veth get stats process, it puts local dev rx_dropped and peer dev tx_dropped into together as local rx_drpped value. So that it shows double value of real dropped packets number in this case. This patch ignores peer tx_dropped when counting local rx_dropped, since peer tx_dropped is duplicated to local rx_dropped at most cases. Signed-off-by: Jiang Lidong <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-06Merge tag 'amd-drm-fixes-5.6-2020-03-05' of ↵Dave Airlie8-55/+129
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-03-05: amdgpu: - Gfx reset fix for gfx9, 10 - Fix for gfx10 - DP MST fix - DCC fix - Renoir power fixes - Navi power fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-06Merge tag 'drm-intel-fixes-2020-03-05' of ↵Dave Airlie13-57/+142
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc5: - Break up long lists of object reclaim with cond_resched() - PSR probe fix - TGL workarounds - Selftest return value fix - Drop timeline mutex while waiting for retirement - Wait for OA configuration completion before writes to OA buffer Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-06Merge tag 'drm-misc-fixes-2020-03-05' of ↵Dave Airlie12-75/+202
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v5.6.rc5: - dma-buf fix memory leak - Fix resource id creation race in virtio. - Various mmap fixes. - Fix fence leak in ttm_buffer_object_transfer(). - Fixes for sun4i VI layer format support. - kirin: Revert "Fix for hikey620 display offset problem" Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-05Merge tag 'wireless-drivers-2020-03-05' of ↵David S. Miller2-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.6 Second set of fixes for v5.6. Only two small fixes this time. iwlwifi * fix another initialisation regression with 3168 devices mt76 * fix memory corruption with too many rx fragments ==================== Signed-off-by: David S. Miller <[email protected]>
2020-03-05sfc: complete the next packet when we receive a timestampTom Zhao6-31/+78
We now ignore the "completion" event when using tx queue timestamping, and only pay attention to the two (high and low) timestamp events. The NIC will send a pair of timestamp events for every packet transmitted. The current firmware may merge the completion events, and it is possible that future versions may reorder the completion and timestamp events. As such the completion event is not useful. Without this patch in place a merged completion event on a queue with timestamping will cause a "spurious TX completion" error. This affects SFN8000-series adapters. Signed-off-by: Tom Zhao <[email protected]> Acked-by: Martin Habets <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-05riscv: fix seccomp reject syscall code pathTycho Andersen3-21/+8
If secure_computing() rejected a system call, we were previously setting the system call number to -1, to indicate to later code that the syscall failed. However, if something (e.g. a user notification) was sleeping, and received a signal, we may set a0 to -ERESTARTSYS and re-try the system call again. In this case, seccomp "denies" the syscall (because of the signal), and we would set a7 to -1, thus losing the value of the system call we want to restart. Instead, let's return -1 from do_syscall_trace_enter() to indicate that the syscall was rejected, so we don't clobber the value in case of -ERESTARTSYS or whatever. This commit fixes the user_notification_signal seccomp selftest on riscv to no longer hang. That test expects the system call to be re-issued after the signal, and it wasn't due to the above bug. Now that it is, everything works normally. Note that in the ptrace (tracer) case, the tracer can set the register values to whatever they want, so we still need to keep the code that handles out-of-bounds syscalls. However, we can drop the comment. We can also drop syscall_set_nr(), since it is no longer used anywhere, and the code that re-loads the value in a7 because of it. Reported in: https://lore.kernel.org/bpf/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/ Reported-by: David Abdurachmanov <[email protected]> Signed-off-by: Tycho Andersen <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05blktrace: fix dereference after null checkCengiz Can1-1/+4
There was a recent change in blktrace.c that added a RCU protection to `q->blk_trace` in order to fix a use-after-free issue during access. However the change missed an edge case that can lead to dereferencing of `bt` pointer even when it's NULL: Coverity static analyzer marked this as a FORWARD_NULL issue with CID 1460458. ``` /kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store() 1898 ret = 0; 1899 if (bt == NULL) 1900 ret = blk_trace_setup_queue(q, bdev); 1901 1902 if (ret == 0) { 1903 if (attr == &dev_attr_act_mask) >>> CID 1460458: Null pointer dereferences (FORWARD_NULL) >>> Dereferencing null pointer "bt". 1904 bt->act_mask = value; 1905 else if (attr == &dev_attr_pid) 1906 bt->pid = value; 1907 else if (attr == &dev_attr_start_lba) 1908 bt->start_lba = value; 1909 else if (attr == &dev_attr_end_lba) ``` Added a reassignment with RCU annotation to fix the issue. Fixes: c780e86dd48 ("blktrace: Protect q->blk_trace with RCU") Cc: [email protected] Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Bob Liu <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Cengiz Can <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-03-05MAINTAINERS: Add missed files related to Synopsys DesignWare UARTAndy Shevchenko1-0/+2
8250_dw has been split to library part and the driver, the library is being used by 8250_lpss, which represents Synosys DesignWare UART (with optional Synopsys Designware DMA) enumerated by PCI. Add missed above mentioned files to the database record for review. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-05serial: 8250_exar: add support for ACCES cardsJay Dolan1-0/+33
Add ACCES VIDs and PIDs that use the Exar chips Signed-off-by: Jay Dolan <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-05riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS fileYash Shah1-0/+5
Add the ability to reboot the HiFive Unleashed board via GPIO. Signed-off-by: Yash Shah <[email protected]> Reviewed-by: Anup Patel <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05tty:serial:mvebu-uart:fix a wrong returntangbin1-1/+1
in this place, the function should return a negative value and the PTR_ERR already returns a negative,so return -PTR_ERR() is wrong. Signed-off-by: tangbin <[email protected]> Cc: stable <[email protected]> Acked-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-05net: hns3: fix a not link up issue when fibre port supports autonegJian Shen1-1/+3
When fibre port supports auto-negotiation, the IMP(Intelligent Management Process) processes the speed of auto-negotiation and the user's speed separately. For below case, the port will get a not link up problem. step 1: disables auto-negotiation and sets speed to A, then the driver's MAC speed will be updated to A. step 2: enables auto-negotiation and MAC gets negotiated speed B, then the driver's MAC speed will be updated to B through querying in periodical task. step 3: MAC gets new negotiated speed A. step 4: disables auto-negotiation and sets speed to B before periodical task query new MAC speed A, the driver will ignore the speed configuration. This patch fixes it by skipping speed and duplex checking when fibre port supports auto-negotiation. Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port") Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Huazhong Tan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-05slip: make slhc_compress() more robust against malicious packetsEric Dumazet1-4/+10
Before accessing various fields in IPV4 network header and TCP header, make sure the packet : - Has IP version 4 (ip->version == 4) - Has not a silly network length (ip->ihl >= 5) - Is big enough to hold network and transport headers - Has not a silly TCP header size (th->doff >= sizeof(struct tcphdr) / 4) syzbot reported : BUG: KMSAN: uninit-value in slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270 CPU: 0 PID: 11728 Comm: syz-executor231 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270 ppp_send_frame drivers/net/ppp/ppp_generic.c:1637 [inline] __ppp_xmit_process+0x1902/0x2970 drivers/net/ppp/ppp_generic.c:1495 ppp_xmit_process+0x147/0x2f0 drivers/net/ppp/ppp_generic.c:1516 ppp_write+0x6bb/0x790 drivers/net/ppp/ppp_generic.c:512 do_loop_readv_writev fs/read_write.c:717 [inline] do_iter_write+0x812/0xdc0 fs/read_write.c:1000 compat_writev+0x2df/0x5a0 fs/read_write.c:1351 do_compat_pwritev64 fs/read_write.c:1400 [inline] __do_compat_sys_pwritev fs/read_write.c:1420 [inline] __se_compat_sys_pwritev fs/read_write.c:1414 [inline] __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f7cd99 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000ffdb84ac EFLAGS: 00000217 ORIG_RAX: 000000000000014e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000200001c0 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000040047459 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] ppp_write+0x115/0x790 drivers/net/ppp/ppp_generic.c:500 do_loop_readv_writev fs/read_write.c:717 [inline] do_iter_write+0x812/0xdc0 fs/read_write.c:1000 compat_writev+0x2df/0x5a0 fs/read_write.c:1351 do_compat_pwritev64 fs/read_write.c:1400 [inline] __do_compat_sys_pwritev fs/read_write.c:1420 [inline] __se_compat_sys_pwritev fs/read_write.c:1414 [inline] __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 Fixes: b5451d783ade ("slip: Move the SLIP drivers") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-05RISC-V: Select Goldfish RTC driver for QEMU virt machineAnup Patel3-0/+4
We select Goldfish RTC driver using QEMU virt machine kconfig option to access RTC device on QEMU virt machine. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machineAnup Patel3-0/+4
The SYSCON Reboot and Poweroff drivers can be used on QEMU virt machine to reboot or poweroff the system hence we select these drivers using QEMU virt machine kconfig option. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05RISC-V: Enable QEMU virt machine support in defconfigsAnup Patel2-29/+2
We have kconfig option for QEMU virt machine so let's enable it in RV32 and RV64 defconfigs. Also, we remove various VIRTIO configs from RV32 and RV64 defconfigs because these are now selected by QEMU virt machine kconfig option. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05RISC-V: Add kconfig option for QEMU virt machineAnup Patel1-0/+20
We add kconfig option for QEMU virt machine and select all required VIRTIO drivers using this kconfig option. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds2-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V update from Wei Liu: - Update MAINTAINERS file for Hyper-V - One cleanup patch for Hyper-V HID driver * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: HID: hyperv: NULL check before some freeing functions is not needed. Hyper-V: add myself as a maintainer Hyper-V: Drop Sasha Levin from the Hyper-V maintainers
2020-03-05Merge tag 'dmaengine-fix-5.6-rc5' of ↵Linus Torvalds7-153/+400
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes: - Doc updates to clean warnings for dmaengine - Fixes for newly added Intel idxd driver - More fixes for newly added TI k3-udma driver - Fixes for IMX and Tegra drivers" * tag 'dmaengine-fix-5.6-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: imx-sdma: Fix the event id check to include RX event for UART6 dmaengine: tegra-apb: Prevent race conditions of tasklet vs free list dmaengine: tegra-apb: Fix use-after-free dmaengine: imx-sdma: fix context cache dmaengine: idxd: wq size configuration needs to check global max size dmaengine: idxd: sysfs input of wq incorrect wq type should return error dmaengine: coh901318: Fix a double lock bug in dma_tc_handle() dmaengine: idxd: correct reserved token calculation dmaengine: ti: k3-udma: Fix terminated transfer handling dmaengine: ti: k3-udma: Use the channel direction in pause/resume functions dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclic dmaengine: ti: k3-udma: Move the TR counter calculation to helper function dmaengine: ti: k3-udma: Workaround for RX teardown with stale data in peer dmaengine: ti: k3-udma: Use ktime/usleep_range based TX completion check dmaengine: idxd: Fix error handling in idxd_wq_cdev_dev_setup() dmaengine: doc: fix warnings/issues of client.rst dmaengine: idxd: fix runaway module ref count on device driver bind
2020-03-05xen/blkfront: fix ring info addressingJuergen Gross1-38/+42
Commit 0265d6e8ddb890 ("xen/blkfront: limit allocated memory size to actual use case") made struct blkfront_ring_info size dynamic. This is fine when running with only one queue, but with multiple queues the addressing of the single queues has to be adapted as the structs are allocated in an array. Fixes: 0265d6e8ddb890 ("xen/blkfront: limit allocated memory size to actual use case") Reported-by: Sander Eikelenboom <[email protected]> Tested-by: Sander Eikelenboom <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Acked-by: Roger Pau Monné <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xen/xenbus: fix lockingJuergen Gross3-8/+10
Commit 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") introduced a bug by holding a lock while calling a function which might schedule. Fix that by using a semaphore instead. Fixes: 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") Signed-off-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xenbus: req->err should be updated before req->stateDongli Zhang1-0/+2
This patch adds the barrier to guarantee that req->err is always updated before req->state. Otherwise, read_reply() would not return ERR_PTR(req->err) but req->body, when process_writes()->xb_write() is failed. Signed-off-by: Dongli Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Julien Grall <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xenbus: req->body should be updated before req->stateDongli Zhang2-3/+8
The req->body should be updated before req->state is updated and the order should be guaranteed by a barrier. Otherwise, read_reply() might return req->body = NULL. Below is sample callstack when the issue is reproduced on purpose by reordering the updates of req->body and req->state and adding delay in code between updates of req->state and req->body. [ 22.356105] general protection fault: 0000 [#1] SMP PTI [ 22.361185] CPU: 2 PID: 52 Comm: xenwatch Not tainted 5.5.0xen+ #6 [ 22.366727] Hardware name: Xen HVM domU, BIOS ... [ 22.372245] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 ... ... [ 22.392163] RSP: 0018:ffffb2d64023fdf0 EFLAGS: 00010246 [ 22.395933] RAX: 0000000000000000 RBX: 75746e7562755f6d RCX: 0000000000000000 [ 22.400871] RDX: 0000000000000000 RSI: ffffb2d64023fdfc RDI: 75746e7562755f6d [ 22.405874] RBP: 0000000000000000 R08: 00000000000001e8 R09: 0000000000cdcdcd [ 22.410945] R10: ffffb2d6402ffe00 R11: ffff9d95395eaeb0 R12: ffff9d9535935000 [ 22.417613] R13: ffff9d9526d4a000 R14: ffff9d9526f4f340 R15: ffff9d9537654000 [ 22.423726] FS: 0000000000000000(0000) GS:ffff9d953bc80000(0000) knlGS:0000000000000000 [ 22.429898] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.434342] CR2: 000000c4206a9000 CR3: 00000001ea3fc002 CR4: 00000000001606e0 [ 22.439645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 22.444941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 22.450342] Call Trace: [ 22.452509] simple_strtoull+0x27/0x70 [ 22.455572] xenbus_transaction_start+0x31/0x50 [ 22.459104] netback_changed+0x76c/0xcc1 [xen_netfront] [ 22.463279] ? find_watch+0x40/0x40 [ 22.466156] xenwatch_thread+0xb4/0x150 [ 22.469309] ? wait_woken+0x80/0x80 [ 22.472198] kthread+0x10e/0x130 [ 22.474925] ? kthread_park+0x80/0x80 [ 22.477946] ret_from_fork+0x35/0x40 [ 22.480968] Modules linked in: xen_kbdfront xen_fbfront(+) xen_netfront xen_blkfront [ 22.486783] ---[ end trace a9222030a747c3f7 ]--- [ 22.490424] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 The virt_rmb() is added in the 'true' path of test_reply(). The "while" is changed to "do while" so that test_reply() is used as a read memory barrier. Signed-off-by: Dongli Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Julien Grall <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xen: Replace zero-length array with flexible-array memberGustavo A. R. Silva2-2/+2
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/20200226212612.GA4663@embeddedor Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05ALSA: hda/realtek - Enable the headset of ASUS B9450FA with ALC294Jian-Hong Pan1-0/+13
A headset on the laptop like ASUS B9450FA does not work, until quirk ALC294_FIXUP_ASUS_HPE is applied. Signed-off-by: Jian-Hong Pan <[email protected]> Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-03-05drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume ↵Hersen Wu1-0/+69
from s3 (v2) This interface is for dGPU Navi1x. Linux dc-pplib interface depends on window driver dc implementation. For Navi1x, clock settings of dcn watermarks are fixed. the settings should be passed to smu during boot up and resume from s3. boot up: dc calculate dcn watermark clock settings within dc_create, dcn20_resource_construct, then call pplib functions below to pass the settings to smu: smu_set_watermarks_for_clock_ranges smu_set_watermarks_table navi10_set_watermarks_table smu_write_watermarks_table For Renoir, clock settings of dcn watermark are also fixed values. dc has implemented different flow for window driver: dc_hardware_init / dc_set_power_state dcn10_init_hw notify_wm_ranges set_wm_ranges For Linux smu_set_watermarks_for_clock_ranges renoir_set_watermarks_table smu_write_watermarks_table dc_hardware_init -> amdgpu_dm_init dc_set_power_state --> dm_resume therefore, linux dc-pplib interface of navi10/12/14 is different from that of Renoir. v2: add missing unlock in error case Signed-off-by: Hersen Wu <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-05drm/amd/powerplay: map mclk to fclk for COMBINATIONAL_BYPASS casePrike Liang1-3/+3
When hit COMBINATIONAL_BYPASS the mclk will be bypass and can export fclk frequency to user usage. Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-03-05drm/amd/powerplay: fix pre-check condition for setting clock rangePrike Liang2-4/+1
This fix will handle some MP1 FW issue like as mclk dpm table in renoir has a reverse dpm clock layout and a zero frequency dpm level as following case. cat pp_dpm_mclk 0: 1200Mhz 1: 1200Mhz 2: 800Mhz 3: 0Mhz Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
Powered by cgit, Gruvboxed by Blaster4385.