aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-04-08Merge tag 'meson8-dt-fix' of https://github.com/carlocaione/linux-meson into ↵Kevin Hilman3-58/+49
fixes With http://www.spinics.net/lists/devicetree/msg116771.html we split / refactor the pinctrl driver to have two different pinctrl devices for each bus on the Amlogic Meson8 / Meson8b SoCs. These are the missing patches for documentation and DT that weren't pulled into mainline with the driver changes. * tag 'meson8-dt-fix' of https://github.com/carlocaione/linux-meson: documentation: Fix pinctrl documentation for Meson8 / Meson8b ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b
2016-04-08Merge tag 'usb-serial-4.6-rc3' of ↵Greg Kroah-Hartman241-1421/+2174
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.6-rc3 Here are some new device ids. Signed-off-by: Johan Hovold <[email protected]>
2016-04-08Merge tag 'mac80211-for-davem-2016-04-06' of ↵David S. Miller9-25/+88
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== For the current RC series, we have the following fixes: * TDLS fixes from Arik and Ilan * rhashtable fixes from Ben and myself * documentation fixes from Luis * U-APSD fixes from Emmanuel * a TXQ fix from Felix * and a compiler warning suppression from Jeff ==================== Signed-off-by: David S. Miller <[email protected]>
2016-04-08bridge, netem: mark mailing lists as moderatedstephen hemminger1-2/+2
I moderate these (lightly loaded) lists to block spam. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-04-08parisc: Update comment regarding relative extable supportHelge Deller1-6/+4
Update the comment to reflect the changes of commit 0de7985 (parisc: Use generic extable search and sort routines). Signed-off-by: Helge Deller <[email protected]>
2016-04-08parisc: Unbreak handling exceptions from kernel modulesHelge Deller4-0/+9
Handling exceptions from modules never worked on parisc. It was just masked by the fact that exceptions from modules don't happen during normal use. When a module triggers an exception in get_user() we need to load the main kernel dp value before accessing the exception_data structure, and afterwards restore the original dp value of the module on exit. Noticed-by: Mikulas Patocka <[email protected]> Signed-off-by: Helge Deller <[email protected]> Cc: [email protected]
2016-04-08parisc: Fix kernel crash with reversed copy_from_user()Helge Deller1-0/+3
The kernel module testcase (lib/test_user_copy.c) exhibited a kernel crash on parisc if the parameters for copy_from_user were reversed ("illegal reversed copy_to_user" testcase). Fix this potential crash by checking the fault handler if the faulting address is in the exception table. Signed-off-by: Helge Deller <[email protected]> Cc: [email protected] Cc: Kees Cook <[email protected]>
2016-04-08parisc: Avoid function pointers for kernel exception routinesHelge Deller1-5/+5
We want to avoid the kernel module loader to create function pointers for the kernel fixup routines of get_user() and put_user(). Changing the external reference from function type to int type fixes this. This unbreaks exception handling for get_user() and put_user() when called from a kernel module. Signed-off-by: Helge Deller <[email protected]> Cc: [email protected]
2016-04-08parisc: Handle R_PARISC_PCREL32 relocations in kernel modulesHelge Deller1-0/+8
Commit 0de7985 (parisc: Use generic extable search and sort routines) changed the exception tables to use 32bit relative offsets. This patch now adds support to the kernel module loader to handle such R_PARISC_PCREL32 relocations for 32- and 64-bit modules. Signed-off-by: Helge Deller <[email protected]>
2016-04-08tuntap: restore default qdiscJason Wang1-2/+2
After commit f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev"), default qdisc was changed to noqueue because tuntap does not set tx_queue_len during .setup(). This patch restores default qdisc by setting tx_queue_len in tun_setup(). Fixes: f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev") Cc: Phil Sutter <[email protected]> Signed-off-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Acked-by: Phil Sutter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-04-08orangefs: remove unused variableMartin Brandenburg1-3/+1
Signed-off-by: Martin Brandenburg <[email protected]> Signed-off-by: Mike Marshall <[email protected]>
2016-04-08Merge branches 'pm-core', 'powercap' and 'pm-tools'Rafael J. Wysocki5-10/+122
* pm-core: PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfs PM / runtime: Document steps for device removal * powercap: powercap: intel_rapl: Add missing Haswell model * pm-tools: tools/power turbostat: work around RC6 counter wrap tools/power turbostat: initial KBL support tools/power turbostat: initial SKX support tools/power turbostat: decode BXT TSC frequency via CPUID tools/power turbostat: initial BXT support tools/power turbostat: print IRTL MSRs tools/power turbostat: SGX state should print only if --debug
2016-04-08Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'acpi-cppc'Rafael J. Wysocki4-52/+258
* pm-cpufreq: cpufreq: dt: Drop stale comment cpufreq: intel_pstate: Documenation for structures cpufreq: intel_pstate: fix inconsistency in setting policy limits intel_pstate: Avoid extra invocation of intel_pstate_sample() intel_pstate: Do not set utilization update hook too early * pm-cpuidle: intel_idle: Add KBL support intel_idle: Add SKX support intel_idle: Clean up all registered devices on exit. intel_idle: Propagate hot plug errors. intel_idle: Don't overreact to a cpuidle registration failure. intel_idle: Setup the timer broadcast only on successful driver load. intel_idle: Avoid a double free of the per-CPU data. intel_idle: Fix dangling registration on error path. intel_idle: Fix deallocation order on the driver exit path. intel_idle: Remove redundant initialization calls. intel_idle: Fix a helper function's return value. intel_idle: remove useless return from void function. * acpi-cppc: mailbox: pcc: Don't access an unmapped memory address space
2016-04-08orangefs: Add KERN_<LEVEL> to gossip_<level> macrosJoe Perches1-14/+17
Emit the logging messages at the appropriate levels. Miscellanea: o Change format to fmt o Use the more common ##__VA_ARGS__ Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Mike Marshall <[email protected]>
2016-04-08orangefs: strncpy -> strscpyMartin Brandenburg1-1/+5
It would have been possible for a rogue client-core to send in a symlink target which is not NUL terminated. This returns EIO if the client-core gives us corrupt data. Leave debugfs and superblock code as is for now. Other dcache.c and namei.c strncpy instances are safe because ORANGEFS_NAME_MAX = NAME_MAX + 1; there is always enough space for a name plus a NUL byte. Signed-off-by: Martin Brandenburg <[email protected]> Signed-off-by: Mike Marshall <[email protected]>
2016-04-08orangefs: clean up truncate ctime and mtime settingMartin Brandenburg1-15/+1
The ctime and mtime are always updated on a successful ftruncate and only updated on a successful truncate where the size changed. We handle the ``if the size changed'' bit. This matches FUSE's behavior. Signed-off-by: Martin Brandenburg <[email protected]> Signed-off-by: Mike Marshall <[email protected]>
2016-04-08Orangefs: fix ifnullfree.cocci warningskbuild test robot1-2/+1
fs/orangefs/orangefs-debugfs.c:130:2-26: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci Signed-off-by: Fengguang Wu <[email protected]> Signed-off-by: Mike Marshall <[email protected]>
2016-04-08Orangefs: optimize boilerplate code.Mike Marshall2-2/+2
Suggested by David Binderman <[email protected]> The former can potentially be a performance win over the latter. memcpy(d, s, len); memset(d+len, c, size-len); memset(d, c, size); memcpy(d, s, len); Signed-off-by: Mike Marshall <[email protected]>
2016-04-08Orangefs: xattr.c cleanupMike Marshall1-16/+1
1. It is nonsense to test for negative size_t, suggested by David Binderman <[email protected]> 2. By the time Orangefs gets called, the vfs has ensured that name != NULL, and that buffer and size are sane. Signed-off-by: Mike Marshall <[email protected]>
2016-04-08mpls: find_outdev: check for err ptr in addition to NULL checkRoopa Prabhu1-0/+3
find_outdev calls inet{,6}_fib_lookup_dev() or dev_get_by_index() to find the output device. In case of an error, inet{,6}_fib_lookup_dev() returns error pointer and dev_get_by_index() returns NULL. But the function only checks for NULL and thus can end up calling dev_put on an ERR_PTR. This patch adds an additional check for err ptr after the NULL check. Before: Trying to add an mpls route with no oif from user, no available path to 10.1.1.8 and no default route: $ip -f mpls route add 100 as 200 via inet 10.1.1.8 [ 822.337195] BUG: unable to handle kernel NULL pointer dereference at 00000000000003a3 [ 822.340033] IP: [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] PGD 1db38067 PUD 1de9e067 PMD 0 [ 822.340033] Oops: 0000 [#1] SMP [ 822.340033] Modules linked in: [ 822.340033] CPU: 0 PID: 11148 Comm: ip Not tainted 4.5.0-rc7+ #54 [ 822.340033] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 822.340033] task: ffff88001db82580 ti: ffff88001dad4000 task.ti: ffff88001dad4000 [ 822.340033] RIP: 0010:[<ffffffff8148781e>] [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] RSP: 0018:ffff88001dad7a88 EFLAGS: 00010282 [ 822.340033] RAX: ffffffffffffff9b RBX: ffffffffffffff9b RCX: 0000000000000002 [ 822.340033] RDX: 00000000ffffff9b RSI: 0000000000000008 RDI: 0000000000000000 [ 822.340033] RBP: ffff88001ddc9ea0 R08: ffff88001e9f1768 R09: 0000000000000000 [ 822.340033] R10: ffff88001d9c1100 R11: ffff88001e3c89f0 R12: ffffffff8187e0c0 [ 822.340033] R13: ffffffff8187e0c0 R14: ffff88001ddc9e80 R15: 0000000000000004 [ 822.340033] FS: 00007ff9ed798700(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 [ 822.340033] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 822.340033] CR2: 00000000000003a3 CR3: 000000001de89000 CR4: 00000000000006f0 [ 822.340033] Stack: [ 822.340033] 0000000000000000 0000000100000000 0000000000000000 0000000000000000 [ 822.340033] 0000000000000000 0801010a00000000 0000000000000000 0000000000000000 [ 822.340033] 0000000000000004 ffffffff8148749b ffffffff8187e0c0 000000000000001c [ 822.340033] Call Trace: [ 822.340033] [<ffffffff8148749b>] ? mpls_rt_alloc+0x2b/0x3e [ 822.340033] [<ffffffff81488e66>] ? mpls_rtm_newroute+0x358/0x3e2 [ 822.340033] [<ffffffff810e7bbc>] ? get_page+0x5/0xa [ 822.340033] [<ffffffff813b7d94>] ? rtnetlink_rcv_msg+0x17e/0x191 [ 822.340033] [<ffffffff8111794e>] ? __kmalloc_track_caller+0x8c/0x9e [ 822.340033] [<ffffffff813c9393>] ? rht_key_hashfn.isra.20.constprop.57+0x14/0x1f [ 822.340033] [<ffffffff813b7c16>] ? __rtnl_unlock+0xc/0xc [ 822.340033] [<ffffffff813cb794>] ? netlink_rcv_skb+0x36/0x82 [ 822.340033] [<ffffffff813b4507>] ? rtnetlink_rcv+0x1f/0x28 [ 822.340033] [<ffffffff813cb2b1>] ? netlink_unicast+0x106/0x189 [ 822.340033] [<ffffffff813cb5b3>] ? netlink_sendmsg+0x27f/0x2c8 [ 822.340033] [<ffffffff81392ede>] ? sock_sendmsg_nosec+0x10/0x1b [ 822.340033] [<ffffffff81393df1>] ? ___sys_sendmsg+0x182/0x1e3 [ 822.340033] [<ffffffff810e4f35>] ? __alloc_pages_nodemask+0x11c/0x1e4 [ 822.340033] [<ffffffff8110619c>] ? PageAnon+0x5/0xd [ 822.340033] [<ffffffff811062fe>] ? __page_set_anon_rmap+0x45/0x52 [ 822.340033] [<ffffffff810e7bbc>] ? get_page+0x5/0xa [ 822.340033] [<ffffffff810e85ab>] ? __lru_cache_add+0x1a/0x3a [ 822.340033] [<ffffffff81087ea9>] ? current_kernel_time64+0x9/0x30 [ 822.340033] [<ffffffff813940c4>] ? __sys_sendmsg+0x3c/0x5a [ 822.340033] [<ffffffff8148f597>] ? entry_SYSCALL_64_fastpath+0x12/0x6a [ 822.340033] Code: 83 08 04 00 00 65 ff 00 48 8b 3c 24 e8 40 7c f2 ff eb 13 48 c7 c3 9f ff ff ff eb 0f 89 ce e8 f1 ae f1 ff 48 89 c3 48 85 db 74 15 <48> 8b 83 08 04 00 00 65 ff 08 48 81 fb 00 f0 ff ff 76 0d eb 07 [ 822.340033] RIP [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] RSP <ffff88001dad7a88> [ 822.340033] CR2: 00000000000003a3 [ 822.435363] ---[ end trace 98cc65e6f6b8bf11 ]--- After patch: $ip -f mpls route add 100 as 200 via inet 10.1.1.8 RTNETLINK answers: Network is unreachable Signed-off-by: Roopa Prabhu <[email protected]> Reported-by: David Miller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-04-08Merge tag 'kvm-arm-for-4.6-rc4' of ↵Radim Krčmář7-24/+95
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM Fixes for v4.6-rc4 Addresses: - Wrong indentation in the PMU code from the merge window - A long-time bug occuring with running ntpd on the host, candidate for stable - Properly handle (and warn about) the unsupported configuration of running on systems with less than 40 bits of PA space - More fixes to the PM and hotplug notifier stuff from the merge window
2016-04-08gpio: pca953x: Use correct u16 value for register word writeYong Li1-1/+2
The current implementation only uses the first byte in val, the second byte is always 0. Change it to use cpu_to_le16 to write the two bytes into the register Cc: [email protected] Signed-off-by: Yong Li <[email protected]> Reviewed-by: Phil Reid <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-04-08gpiolib: Defer gpio device setup until after gpiolib initializationGuenter Roeck1-31/+67
Since commit ff2b13592299 ("gpio: make the gpiochip a real device"), attempts to add a gpio chip prior to gpiolib initialization cause the system to crash. This happens because gpio_bus_type has not been registered yet. Defer creating gpio devices until after gpiolib has been initialized to fix the problem. Cc: Greg Ungerer <[email protected]> Cc: Alexandre Courbot <[email protected]> Fixes: ff2b13592299 ("gpio: make the gpiochip a real device") Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-04-08gpiolib: Do not use devm functions when registering gpio chipGuenter Roeck1-7/+12
It is possible that a gpio chip is registered before the gpiolib initialization code has run. This means we can not use devm_ functions to allocate memory at that time. Do it the old fashioned way. Cc: Alexandre Courbot <[email protected]> Cc: Greg Ungerer <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-04-08gpio: pxa: fix legacy non pinctrl aware buildsRobert Jarzmik1-2/+2
In legacy pxa builds, ie. non device-tree and platform-data only builds, pinctrl is not yet available. As a consequence, the pinctrl gpio direction change function is a stub, returning always success. In the current state, the gpio driver direction function believes the pinctrl direction change was successful, and exits without actually changing the gpio direction. This patch changes the logic : - if the pinctrl direction function fails, gpio direction will report that failure - if the pinctrl direction function succeeds, gpio direction is changed by the gpio driver anyway. This is sub optimal in the pinctrl aware case, as the gpio direction will be changed twice: once by pinctrl function and another time by the gpio direction function. Yet it should be acceptable in this form, as this is functional for all pxa platforms (device-tree and platform-data), and moreover changing a gpio direction is very very seldom, usually in machine initialization, seldom in drivers probe, and an exception for ac97 reset bug. Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request") Reported-by: Guenter Roeck <[email protected]> Tested-by: Guenter Roeck <[email protected]> Signed-off-by: Robert Jarzmik <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-04-08gpio / ACPI: ignore GpioInt() GPIOs when requesting GPIO_OUT_*Dmitry Torokhov1-4/+12
When firmware does not use _DSD properties that allow properly name GPIO resources, the kernel falls back on parsing _CRS resources, and will return entries described as GpioInt() as general purpose GPIOs even though they are meant to be used simply as interrupt sources for the device: Device (ETSA) { Name (_HID, "ELAN0001") ... Method(_CRS, 0x0, NotSerialized) { Name(BUF0,ResourceTemplate () { I2CSerialBus( 0x10, /* SlaveAddress */ ControllerInitiated, /* SlaveMode */ 400000, /* ConnectionSpeed */ AddressingMode7Bit, /* AddressingMode */ "\\_SB.I2C1", /* ResourceSource */ ) GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullNone,, "\\_SB.GPSW") { BOARD_TOUCH_GPIO_INDEX } } ) Return (BUF0) } ... } This gives troubles with drivers such as Elan Touchscreen driver (elants_i2c) that uses devm_gpiod_get to look up "reset" GPIO line and decide whether the driver is responsible for powering up and resetting the device, or firmware is. In the above case the lookup succeeds, we map GPIO as output and later fail to request client->irq interrupt that is mapped to the same GPIO. Let's ignore resources described as GpioInt() while parsing _CRS when requesting output GPIOs (but allow them when requesting GPIOD_ASIS or GPIOD_IN as some drivers, such as i2c-hid, do request GPIO as input and then map it to interrupt with gpiod_to_irq). Acked-by: Mika Westerberg <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-04-08ALSA: Fix a typo in timestamping.txtMasanari Iida1-1/+1
This patch fix a spelling typo found in Documentation/sound/alsa/timestamping.txt Signed-off-by: Masanari Iida <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2016-04-08mailbox: xgene-slimpro: Fix wrong test for devm_kzallocAxel Lin1-2/+2
devm_kzalloc() returns NULL on failure. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Jassi Brar <[email protected]>
2016-04-07libnvdimm, pfn: fix nvdimm_namespace_add_poison() vs section alignmentDan Williams3-30/+51
When section alignment padding is in effect we need to shift / truncate the range that is queried for poison by the 'start_pad' or 'end_trunc' reservations. It's easiest if we just pass in an adjusted resource range rather than deriving it from the passed in namespace. With the resource range resolution pushed out to the caller we can also push the namespace-to-region lookup to the caller and drop the implicit pmem-type assumption about the passed in namespace object. Cc: Vishal Verma <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2016-04-07libnvdimm, pfn: fix uuid validationDan Williams1-1/+1
If we detect a namespace has a stale info block in the init path, we should overwrite with the latest configuration. In fact, we already return -ENODEV when the parent uuid is invalid, the same should be done for the 'self' uuid. Otherwise we can get into a condition where userspace is unable to reconfigure the pfn-device without directly / manually invalidating the info block. Cc: <[email protected]> Reported-by: Jeff Moyer <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2016-04-07libnvdimm: fix smart data retrievalDan Williams1-1/+1
It appears that smart data retrieval has been broken the since the initial implementation. Fix the payload size to be 128-bytes per the specification. Cc: <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2016-04-07ipv6: Count in extension headers in skb->network_headerJakub Sitnicki1-4/+4
When sending a UDPv6 message longer than MTU, account for the length of fragmentable IPv6 extension headers in skb->network_header offset. Same as we do in alloc_new_skb path in __ip6_append_data(). This ensures that later on __ip6_make_skb() will make space in headroom for fragmentable extension headers: /* move skb->data to ip header from ext header */ if (skb->data < skb_network_header(skb)) __skb_pull(skb, skb_network_offset(skb)); Prevents a splat due to skb_under_panic: skbuff: skb_under_panic: text:ffffffff8143397b len:2126 put:14 \ head:ffff880005bacf50 data:ffff880005bacf4a tail:0x48 end:0xc0 dev:lo ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] KASAN CPU: 0 PID: 160 Comm: reproducer Not tainted 4.6.0-rc2 #65 [...] Call Trace: [<ffffffff813eb7b9>] skb_push+0x79/0x80 [<ffffffff8143397b>] eth_header+0x2b/0x100 [<ffffffff8141e0d0>] neigh_resolve_output+0x210/0x310 [<ffffffff814eab77>] ip6_finish_output2+0x4a7/0x7c0 [<ffffffff814efe3a>] ip6_output+0x16a/0x280 [<ffffffff815440c1>] ip6_local_out+0xb1/0xf0 [<ffffffff814f1115>] ip6_send_skb+0x45/0xd0 [<ffffffff81518836>] udp_v6_send_skb+0x246/0x5d0 [<ffffffff8151985e>] udpv6_sendmsg+0xa6e/0x1090 [...] Reported-by: Ji Jianwen <[email protected]> Signed-off-by: Jakub Sitnicki <[email protected]> Acked-by: Hannes Frederic Sowa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-04-07Revert "ib_srpt: Convert to percpu_ida tag allocation"Bart Van Assche2-17/+40
This reverts commit 0fd10721fe3664f7549e74af9d28a509c9a68719. That patch causes the ib_srpt driver to crash as soon as the first SCSI command is received: kernel BUG at drivers/infiniband/ulp/srpt/ib_srpt.c:1439! invalid opcode: 0000 [#1] SMP Workqueue: target_completion target_complete_ok_work [target_core_mod] RIP: srpt_queue_response+0x437/0x4a0 [ib_srpt] Call Trace: srpt_queue_data_in+0x9/0x10 [ib_srpt] target_complete_ok_work+0x152/0x2b0 [target_core_mod] process_one_work+0x197/0x480 worker_thread+0x49/0x490 kthread+0xea/0x100 ret_from_fork+0x22/0x40 Aside from the crash, the shortcomings of that patch are as follows: - It makes the ib_srpt driver use I/O contexts allocated by transport_alloc_session_tags() but it does not initialize these I/O contexts properly. All the initializations performed by srpt_alloc_ioctx() are skipped. - It swaps the order of the send ioctx allocation and the transition to RTR mode which is wrong. - The amount of memory that is needed for I/O contexts is doubled. - srpt_rdma_ch.free_list is no longer used but is not removed. Signed-off-by: Bart Van Assche <[email protected]> Cc: Nicholas Bellinger <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-04-07Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds19-86/+264
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bugfixes from Ted Ts'o: "These changes contains a fix for overlayfs interacting with some (badly behaved) dentry code in various file systems. These have been reviewed by Al and the respective file system mtinainers and are going through the ext4 tree for convenience. This also has a few ext4 encryption bug fixes that were discovered in Android testing (yes, we will need to get these sync'ed up with the fs/crypto code; I'll take care of that). It also has some bug fixes and a change to ignore the legacy quota options to allow for xfstests regression testing of ext4's internal quota feature and to be more consistent with how xfs handles this case" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: ignore quota mount options if the quota feature is enabled ext4 crypto: fix some error handling ext4: avoid calling dquot_get_next_id() if quota is not enabled ext4: retry block allocation for failed DIO and DAX writes ext4: add lockdep annotations for i_data_sem ext4: allow readdir()'s of large empty directories to be interrupted btrfs: fix crash/invalid memory access on fsync when using overlayfs ext4 crypto: use dget_parent() in ext4_d_revalidate() ext4: use file_dentry() ext4: use dget_parent() in ext4_file_open() nfs: use file_dentry() fs: add file_dentry() ext4 crypto: don't let data integrity writebacks fail with ENOMEM ext4: check if in-inode xattr is corrupted in ext4_expand_extra_isize_ea()
2016-04-07Merge branch 'for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph fix from Sage Weil: "This just fixes a few remaining memory allocations in RBD to use GFP_NOIO instead of GFP_ATOMIC" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: use GFP_NOIO consistently for request allocations
2016-04-07Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds4-4/+40
Pull virtio/qemu fixes from Michael S Tsirkin: "A couple of fixes for virtio and for the new QEMU fw cfg driver" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio: add VIRTIO_CONFIG_S_NEEDS_RESET device status bit MAINTAINERS: add entry for QEMU firmware: qemu_fw_cfg.c: hold ACPI global lock during device access virtio: virtio 1.0 cs04 spec compliance for reset qemu_fw_cfg: don't leak kobj on init error
2016-04-07Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds33-170/+405
Pull drm fixes from Dave Airlie: "This is mostly amdgpu/radeon fixes, and imx related fixes. There is also one one TTM fix, one nouveau fix, and one hdlcd fix. The AMD ones are some fixes for power management after suspend/resume one some GPUs, and some vblank fixes. The IMX ones are for more stricter plane checks and some cleanups. I'm off until Monday, so therre might be some fixes early next week if anyone missed me" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (34 commits) drm/nouveau/tegra: acquire and enable reference clock if needed drm/amdgpu: total vram size also reduces pin size drm/amd/powerplay: add uvd/vce dpm enabling flag default. drm/amd/powerplay: fix issue that resume back, dpm can't work on FIJI. drm/amdgpu: save and restore the firwmware cache part when suspend resume drm/amdgpu: save and restore UVD context with suspend and resume drm/ttm: use phys_addr_t for ttm_bus_placement drm: ARM HDLCD - fix an error code drm: ARM HDLCD - get rid of devm_clk_put() drm/radeon: Only call drm_vblank_on/off between drm_vblank_init/cleanup drm/amdgpu: fence wait old rcu slot drm/amdgpu: fix leaking fence in the pageflip code drm/amdgpu: print vram type rather than just DDR drm/amdgpu/gmc: use proper register for vram type on Fiji drm/amdgpu/gmc: move vram type fetching into sw_init drm/amdgpu: Set vblank_disable_allowed = true drm/radeon: Set vblank_disable_allowed = true drm/amd/powerplay: Need to change boot to performance state in resume. drm/amd/powerplay: add new Fiji function for not setting same ps. drm/amdgpu: check dpm state before pm system fs initialized. ...
2016-04-07RDS: fix congestion map corruption for PAGE_SIZE > 4kshamir rabinovitch1-1/+1
When PAGE_SIZE > 4k single page can contain 2 RDS fragments. If 'rds_ib_cong_recv' ignore the RDS fragment offset in to the page it then read the data fragment as far congestion map update and lead to corruption of the RDS connection far congestion map. Signed-off-by: Shamir Rabinovitch <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-04-07RDS: memory allocated must be align to 8shamir rabinovitch1-2/+2
Fix issue in 'rds_ib_cong_recv' when accessing unaligned memory allocated by 'rds_page_remainder_alloc' using uint64_t pointer. Signed-off-by: Shamir Rabinovitch <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-04-07ARM: 8550/1: protect idiv patching against undefined gcc behaviorNicolas Pitre1-0/+2
It was reported that a kernel with CONFIG_ARM_PATCH_IDIV=y stopped booting when compiled with the upcoming gcc 6. Turns out that turning a function address into a writable array is undefined and gcc 6 decided it was OK to omit the store to the first word of the function while still preserving the store to the second word. Even though gcc 6 is now fixed to behave more coherently, it is a mystery that gcc 4 and gcc 5 actually produce wanted code in the kernel. And in fact the reduced test case to illustrate the issue does indeed break with gcc < 6 as well. In any case, let's guard the kernel against undefined compiler behavior by hiding the nature of the array location as suggested by gcc developers. Reference: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70128 Signed-off-by: Nicolas Pitre <[email protected]> Reported-by: Marcin Juszkiewicz <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: [email protected] # v4.5 Signed-off-by: Russell King <[email protected]>
2016-04-07ARM: wire up preadv2 and pwritev2 syscallsRussell King3-2/+6
Wire up the preadv2 and pwritev2 syscalls for ARM. Signed-off-by: Russell King <[email protected]>
2016-04-07GRE: Disable segmentation offloads w/ CSUM and we are encapsulated via FOUAlexander Duyck5-4/+29
This patch fixes an issue I found in which we were dropping frames if we had enabled checksums on GRE headers that were encapsulated by either FOU or GUE. Without this patch I was barely able to get 1 Gb/s of throughput. With this patch applied I am now at least getting around 6 Gb/s. The issue is due to the fact that with FOU or GUE applied we do not provide a transport offset pointing to the GRE header, nor do we offload it in software as the GRE header is completely skipped by GSO and treated like a VXLAN or GENEVE type header. As such we need to prevent the stack from generating it and also prevent GRE from generating it via any interface we create. Fixes: c3483384ee511 ("gro: Allow tunnel stacking in the case of FOU/GUE") Signed-off-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-04-07PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfsStrashko, Grygorii1-0/+2
Now wakeirq stops working for device if wakeup option for this device will be reconfigured through sysfs, like: echo disabled > /sys/devices/platform/extcon_usb1/power/wakeup echo enabled > /sys/devices/platform/extcon_usb1/power/wakeup Once above set of commands is executed the device's wakeup_source opject will be recreated and dev->power.wakeup->wakeirq field will contain NULL. As result, device_wakeup_arm_wake_irqs() will not arm wakeirq for the affected device. Hece, lets try to fix it in the following way: check for dev->wakeirq field when device_wakeup_attach() is called and if !NULL re-attach wakeirq to the device Signed-off-by: Grygorii Strashko <[email protected]> Acked-by: Tony Lindgren <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-04-07tools/power turbostat: work around RC6 counter wrapLen Brown1-4/+15
Sometimes the rc6 sysfs counter spontaneously resets, causing turbostat prints a very large number as it tries to calcuate % = 100 * (old - new) / interval When we see (old > new), print ***.**% instead of a bogus huge number. Note that this detection is not fool-proof, as the counter could reset several times and still result in new > old. Signed-off-by: Len Brown <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-04-07tools/power turbostat: initial KBL supportLen Brown1-0/+14
KBL is similar to SKL Signed-off-by: Len Brown <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-04-07tools/power turbostat: initial SKX supportLen Brown1-1/+8
SKX has a lot in common with HSX Signed-off-by: Len Brown <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-04-07tools/power turbostat: decode BXT TSC frequency via CPUIDLen Brown1-1/+4
Hard-code BXT ART to 19200MHz, so turbostat --debug can fully enumerate TSC: CPUID(0x15): eax_crystal: 3 ebx_tsc: 186 ecx_crystal_hz: 0 TSC: 1190 MHz (19200000 Hz * 186 / 3 / 1000000) Signed-off-by: Len Brown <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-04-07tools/power turbostat: initial BXT supportLen Brown1-0/+9
Broxton has a lot in common with SKL Signed-off-by: Len Brown <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-04-07tools/power turbostat: print IRTL MSRsLen Brown2-3/+64
Some processors use the Interrupt Response Time Limit (IRTL) MSR value to describe the maximum IRQ response time latency for deep package C-states. (Though others have the register, but do not use it) Lets print it out to give insight into the cases where it is used. IRTL begain in SNB, with PC3/PC6/PC7, and HSW added PC8/PC9/PC10. Signed-off-by: Len Brown <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-04-07tools/power turbostat: SGX state should print only if --debugLen Brown1-1/+1
The CPUID.SGX bit was printed, even if --debug was used Signed-off-by: Len Brown <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.