Age | Commit message (Collapse) | Author | Files | Lines |
|
Since gfxoff should be disabled first before trying to access those
GC registers.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
As this is already properly handled in amdgpu_gfx_off_ctrl(). In fact,
this unnecessary cancel_delayed_work_sync may leave a small time window
for race condition and is dangerous.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Otherwise, MGCG/MGLS will be left enabled.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This should speed up debugging VRAM access a lot.
v2: add HDP flush/invalidate
Unrevert: RAS issue at root of the issue has been addressed
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Acked-by: Jonathan Kim <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Kent Russell <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
It works together with drm framework
"drm: Add support for DP 1.4 Compliance edid corruption test"
Add the edid validity check scenario when edid base block is read back
with error. Send back real edid checksum and enable fail-safe mode in DC.
Signed-off-by: Jerry (Fangzhi) Zuo <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following sparse warning:
drivers/gpu/drm/udl/udl_modeset.c:269:5: warning: symbol 'udl_handle_damage'
was not declared. Should it be static?
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zou Wei <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Fix the following coccicheck warning:
drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to
0, suggest !E
drivers/video/fbdev/valkyriefb.c:334:12-13: WARNING comparing pointer to
0
drivers/video/fbdev/valkyriefb.c:348:10-11: WARNING comparing pointer to
0
Signed-off-by: Jason Yan <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add support for Visionox rm69299 panel.
Signed-off-by: Harigovindan P <[email protected]>
Reviewed-by: Matthias Kaehlcke <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
[fix checkpatch warnings, added sentinel ]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Documenting compatible string vendor "visionox" in vendor-prefix yaml file.
Signed-off-by: Harigovindan P <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Some memory is vmalloc'ed in the 'w100fb_save_vidmem' function and freed in
the 'w100fb_restore_vidmem' function. (these functions are called
respectively from the 'suspend' and the 'resume' functions)
However, it is also freed in the 'remove' function.
In order to avoid a potential double free, set the corresponding pointer
to NULL once freed in the 'w100fb_restore_vidmem' function.
Fixes: aac51f09d96a ("[PATCH] w100fb: Rewrite for platform independence")
Cc: Richard Purdie <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Bartlomiej Zolnierkiewicz <[email protected]>
Cc: <[email protected]> # v2.6.14+
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Fix the following coccicheck warning:
drivers/video/fbdev/aty/atyfb_base.c:3822:3-10: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/aty/atyfb_base.c:3824:3-9: WARNING: Assignment of
0/1 to bool variable
Signed-off-by: Jason Yan <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Fix the following coccicheck warning:
drivers/video/fbdev/uvesafb.c:48:12-17: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1827:3-13: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1829:3-13: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1835:3-9: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1837:3-9: WARNING: Assignment of 0/1 to
bool variable
drivers/video/fbdev/uvesafb.c:1839:3-8: WARNING: Assignment of 0/1 to
bool variable
Signed-off-by: Jason Yan <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Fix the following coccicheck warning:
drivers/video/fbdev/udlfb.c:67:12-19: WARNING: Assignment of 0/1 to bool
variable
drivers/video/fbdev/udlfb.c:68:12-20: WARNING: Assignment of 0/1 to bool
variable
drivers/video/fbdev/udlfb.c:69:12-18: WARNING: Assignment of 0/1 to bool
variable
Signed-off-by: Jason Yan <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Fix the following coccicheck warning:
drivers/video/fbdev/i810/i810_main.c:1969:3-7: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1971:3-8: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1973:3-9: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:1975:3-7: WARNING: Assignment of
0/1 to bool variable
drivers/video/fbdev/i810/i810_main.c:2001:3-9: WARNING: Assignment of
0/1 to bool variable
Signed-off-by: Jason Yan <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We need to preserve fatal errors from fences that are being terminated
as we hook them up.
Fixes: ef4688497512 ("drm/i915: Propagate fence errors")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Matthew Auld <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We need to toggle a SDE chicken bit on and then off as the final
step when disabling interrupts in preparation for runtime suspend.
Bspec: 33450
Bspec: 8402
Cc: Bob Paauwe <[email protected]>
Signed-off-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Bob Paauwe <[email protected]>
|
|
As we only restore the default context state upon banning a context, we
only need enough of the state to run the ring and nothing more. That is
we only need our bare protocontext.
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Andi Shyti <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
After the structure was padded to 1024 bytes, it is no longer
suitable for being a local variable, as the function surpasses
the warning limit for 32-bit architectures:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:587:5: error: stack frame size of 1072 bytes in function 'amdgpu_ras_feature_enable' [-Werror,-Wframe-larger-than=]
int amdgpu_ras_feature_enable(struct amdgpu_device *adev,
^
Use kzalloc() instead to get it from the heap.
Fixes: a0d254820f43 ("drm/amdgpu: update RAS TA to Host interface")
Acked-by: Christian König <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This uses backlight_device_set_brightness() to set the brightness
level requested via ATIF.
Signed-off-by: Andriy Gapon <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes warning because pipe is unsigned long and can never be negtative
vers/gpu/drm/radeon/radeon_kms.c:831:11: warning:
comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (pipe < 0 || pipe >= rdev->num_crtc) {
drivers/gpu/drm/radeon/radeon_kms.c:857:11: warning:
comparison of unsigned expression < 0 is always false [-Wtype-limits]
if (pipe < 0 || pipe >= rdev->num_crtc) {
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: ChenTao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When building with Clang:
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:4160:53: warning: overflow in
expression; result is -294967296 with type 'long' [-Winteger-overflow]
expires = ktime_get_mono_fast_ns() + NSEC_PER_SEC * 4L;
^
1 warning generated.
Multiplication happens first due to order of operations and both
NSEC_PER_SEC and 4 are long literals so the expression overflows. To
avoid this, make 4 an unsigned long long literal, which matches the
type of expires (u64).
Fixes: 3f12acc8d6d4 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3")
Link: https://github.com/ClangBuiltLinux/linux/issues/1017
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Aric Cyr <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add dmub related struct field for future use.
Signed-off-by: Anthony Koo <[email protected]>
Reviewed-by: Anthony Koo <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Make a separation of what belongs in the differen dmub
headers
dmub_srv.h is for exposing dmub srv interface to rest of
driver.
other headers inside dmub/inc exposes cmds and definitions
that are owned by the firmware
[How]
keep firmware owned definitions in dmub/inc
move stuff that is purely driver interface headers to dmub/
since those are interface calls that are defined for rest of
driver to use
Signed-off-by: Anthony Koo <[email protected]>
Reviewed-by: Aric Cyr <[email protected]>
Acked-by: Harry Wentland <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Jerry (Fangzhi) Zuo <[email protected]>
Reviewed-by: Hersen Wu <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
During hotplug, a DP port may be connected to the sink through
passive adapter which does not support DPCD reads. Issuing reads
without checking for this condition will result in errors
[how]
Ensure the link is in aux_mode before initiating operation that result
in a DPCD read.
Signed-off-by: Aurabindo Pillai <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Want to make use of detile buffer of all 4 pipes to maximize amount of
data stored to hide certain memory latency cases.
[How]
In case of 1 plane and 1 stream, program 4 pipes to each retrieve 1/4 of
plane later mixed together by the MPCs. Added support for transition
from 4 to 1 MPC to 2 to 1 MPC or no pipe split case and vice versa.
Currently, only enabled if debug flag is set.
Signed-off-by: Isabel Zhang <[email protected]>
Reviewed-by: Dmytro Laktyushkin <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
same with CL#1711022(correcting yuv420 black color in function dcn10_blank_pixel_data,program_scaler),
yuv420 black color also needs to be correct when enabling HDMI stream at the resume procedure.
[How]
correcting the yuv420 black color according to the way how 420 is packed :2 channels carry Y component,
1 channel alternate between Cb and Cr.
Signed-off-by: yanyan kang <[email protected]>
Reviewed-by: Eric Yang <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
For a type like PSR version, it makes sense for most of the code
to include a dc type, instead of having this a fw type define since
this is a capability and type exposed by dc.
Especially if it doesn't even need to communicate with the fw.
The code that is packing the firmware command message
should be the one who needs to translate the psr version
into a command that the firmware understands.
[How]
Add a dc_psr_version enum.
Signed-off-by: Anthony Koo <[email protected]>
Reviewed-by: Aric Cyr <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
FP16 pixel format is not declared to DRM in Linux DM.
[How]
Add FP16 format to the support list presented to DRM from Linux DM.
Signed-off-by: Stylon Wang <[email protected]>
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
in Is_Support function, driver report different caps between
same timing but different scaling cause OS inconsistent.
[How]
min_row_time is a local that’s only used for verifying immediate
flip support. Clamp the vratio used for its calculation to 1.0.
Signed-off-by: Lewis Huang <[email protected]>
Reviewed-by: Tony Cheng <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
For certain display configurations we want to allow PSTATE
switch when one display can switch in VACTIVE and the
other display can switch in VBLANK
[How]
Add extra condition to dcn2 pstate support check
Signed-off-by: Alvin Lee <[email protected]>
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Wait counter is not being reset for each pipe.
[How]
Move counter reset into pipe loop scope.
Signed-off-by: Roman Li <[email protected]>
Reviewed-by: Zhan Liu <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
What a mode change is requested for the same timing a full stream reset
can occur in some cases which causes monitor to blank for a few seconds.
[How]
Do not consider infoframe updates as needing a full stream reset as they
will be handled on the first flip after a modeset when surface
information is available.
Signed-off-by: Aric Cyr <[email protected]>
Reviewed-by: Anthony Koo <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY & HOW]
There is a problem in hscale_pixel_rate, the bug
causes DCN to be more optimistic (more likely to underflow)
in upscale cases during prefetch.
This commit ports the fix from DV code to address these issues.
Signed-off-by: Sung Lee <[email protected]>
Reviewed-by: Dmytro Laktyushkin <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
panel_cntl specific register should be access in panel_cntl object.
[How]
Move these register access from abm to panel_cntl.
Signed-off-by: Yongqiang Sun <[email protected]>
Reviewed-by: Anthony Koo <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following coccicheck warning:
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1574:5-8: Unneeded
variable: "ret". Return "0" on line 1586
Signed-off-by: Jason Yan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Userspace can severely fragment rb_hole_addr rbtree by manipulating
alignment while allocating buffers. Fragmented rb_hole_addr rbtree
would result in large delays while allocating buffer object for a
userspace application. It takes long time to find suitable hole
because if we fail to find a suitable hole in the first attempt
then we look for neighbouring nodes using rb_prev()/rb_next().
Traversing rbtree using rb_prev()/rb_next() can take really long
time if the tree is fragmented.
This patch improves searches in fragmented rb_hole_addr rbtree by
modifying it to an augmented rbtree which will store an extra field
in drm_mm_node, subtree_max_hole. Each drm_mm_node now stores maximum
hole size for its subtree in drm_mm_node->subtree_max_hole. Using
drm_mm_node->subtree_max_hole, it is possible to eliminate a complete
subtree if that subtree is unable to serve a request hence reducing
number of rb_prev()/rb_next() used.
With this patch applied, 1 million bo allocs on amdgpu took ~8 sec,
compared to 50k bo allocs which took 28 sec without it.
partial test code:
int test_fragmentation(void)
{
int i = 0;
uint32_t minor_version;
uint32_t major_version;
struct amdgpu_bo_alloc_request request = {};
amdgpu_bo_handle vram_handle[MAX_ALLOC] = {};
amdgpu_device_handle device_handle;
request.alloc_size = 4096;
request.phys_alignment = 8192;
request.preferred_heap = AMDGPU_GEM_DOMAIN_VRAM;
int fd = open("/dev/dri/card0", O_RDWR | O_CLOEXEC);
amdgpu_device_initialize(fd, &major_version, &minor_version,
&device_handle);
for (i = 0; i < MAX_ALLOC; i++) {
amdgpu_bo_alloc(device_handle, &request, &vram_handle[i]);
}
for (i = 0; i < MAX_ALLOC; i++)
amdgpu_bo_free(vram_handle[i]);
return 0;
}
v2:
Use RB_DECLARE_CALLBACKS_MAX to maintain subtree_max_hole
v3:
insert_hole_addr() should be static a function
fix return value of next_hole_high_addr()/next_hole_low_addr()
Reported-by: kbuild test robot <[email protected]>
v4:
Fix commit message.
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Acked-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/364341/
Signed-off-by: Christian König <[email protected]>
|
|
It was removed in:
Author: Christian König <[email protected]>
Date: Wed Sep 25 11:38:50 2019 +0200
drm/ttm: remove pointers to globals
Signed-off-by: Maya Rashish <[email protected]>
Reviewed-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/360750/
Signed-off-by: Christian König <[email protected]>
|
|
If we cannot trust the reset will flush out the CS event queue such that
process_csb() reports an accurate view of HW, we will need to search the
active and pending contexts to determine which was actually running at
the time we issued the reset.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We need a new PCode request commands and reply codes
to be added as a prepartion patch for QGV points
restricting for new SAGV support.
v2: - Extracted those changes into separate patch
(Ville Syrjälä)
v3: - Moved new PCode masks to another place from
PCode commands(Ville)
v4: - Moved new PCode masks to correspondent PCode
command, with identation(Ville)
- Changed naming to ICL_ instead of GEN11_
to fit more nicely into existing definition
style.
Signed-off-by: Stanislav Lisovskiy <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Unmask/enable AUX interrupts on all ports on TGL+. So far the interrupts
worked only on port A, which meant each transaction on other ports took
10ms.
Cc: <[email protected]> # v5.4+
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Source file was dual licenced but the header was omitted, fix that.
Contributors for this file are:
Daniel Vetter <[email protected]>
Matt Roper <[email protected]>
Maxime Ripard <[email protected]>
Noralf Trønnes <[email protected]>
Thomas Zimmermann <[email protected]>
Acked-by: Noralf Trønnes <[email protected]>
Acked-by: Matt Roper <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Signed-off-by: Emmanuel Vadot <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As suggested by the TODO list for the kernel DRM subsystem, replace
the deprecated functions that take/drop modeset locks with new helpers.
Signed-off-by: Michal Orzel <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The Amlogic S805X/Y uses the same die as the S905X, but with more
limited graphics capabilities.
This adds a soc version detection adding specific limitations on the HDMI
mode selections.
Here, we limit to HDMI 1.2a max HDMI PHY clock frequency.
Changes sinces v1:
- Moved frequency check in the vclk code, and also checks DMT modes
Signed-off-by: Neil Armstrong <[email protected]>
Acked-by: Martin Blumenstingl <[email protected]>
[narmstrong: fixed commit message with HDMI 1.2a instead of HDMI 1.3a]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use a local to shrink a line under 80 columns, and refactor the common
emit_xcs_breadcrumb() wrapper of ggtt-write.
Signed-off-by: Chris Wilson <[email protected]>
Reviewed-by: Mika Kuoppala <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This is a driver for video encoder with VGA and DVI/HDMI outputs.
There is no documentation for the chip -- the operation was guessed from
what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names
come from the ch7035 driver in Mediatek's GPL code dump.
Only bare minimum is implemented -- no fancy stuff, such as scaling. That
would only worsen our misery. We don't load the firmware and we don't need
to even bother enabling the MCU. There are probably no distributable
firmware images anyway.
Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60,
with VGA as well as DVI.
Signed-off-by: Lubomir Rintel <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add binding document for the Chrontel CH7033 VGA/DVI/HDMI Encoder.
Signed-off-by: Lubomir Rintel <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Chrontel makes encoders for video displays and perhaps other stuff.
Their web site is http://www.chrontel.com/.
Signed-off-by: Lubomir Rintel <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|