aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-02-14x86/hotplug: Remove incorrect comment about mwait_play_dead()Srivatsa S. Bhat (VMware)1-1/+1
The comment that says mwait_play_dead() returns only on failure is a bit misleading because mwait_play_dead() could actually return for valid reasons (such as mwait not being supported by the platform) that do not indicate a failure of the CPU offline operation. So, remove the comment. Suggested-by: Thomas Gleixner <[email protected]> Signed-off-by: Srivatsa S. Bhat (VMware) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-14net/mlx5: Suspend auxiliary devices only in case of PCI device suspendJiri Pirko7-19/+19
The original behavior introduced by commit c6acd629eec7 ("net/mlx5e: Add support for devlink-port in non-representors mode") correctly re-instantiated uplink devlink port and related netdevice during devlink reload. However with migration to auxiliary devices, this behaviour changed. Restore the original behaviour and tear down auxiliary devices completely during devlink reload. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5: Remove "recovery" arg from mlx5_load_one() functionJiri Pirko3-7/+6
mlx5_load_one() is always called with recovery==false, so remove the unneeded function arg. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5e: Create auxdev devlink instance in the same ns as parent devlinkJiri Pirko3-4/+7
Commit cited in "fixes" tag moved the devlink port under separate devlink entity created for auxiliary device. Respect the network namespace of parent devlink entity and allocate the devlink there. Fixes: ee75f1fc44dd ("net/mlx5e: Create separate devlink instance for ethernet auxiliary device") Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5e: Move devlink port registration to be done before netdev allocJiri Pirko1-12/+12
Move the devlink port registration to be done right after devlink instance registration. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5e: Move dl_port to struct mlx5e_devJiri Pirko5-23/+11
No need to have dl_port which is tightly coupled with mlx5e code in mlx5 core code. Move it to struct mlx5e_dev and loose mlx5e_devlink_get_dl_port() helper. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5e: Replace usage of mlx5e_devlink_get_dl_port() by netdev->devlink_portJiri Pirko4-9/+7
On places where netdev pointer is available, access related devlink_port pointer by netdev->devlink_port instead of using mlx5e_devlink_get_dl_port() which is going to be removed. Move SET_NETDEV_DEVLINK_PORT() call right after devlink port registration to make sure netdev->devlink_port is valid. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5e: Pass mdev to mlx5e_devlink_port_register()Jiri Pirko3-9/+11
Instead of accessing priv->mdev, pass mdev pointer to mlx5e_devlink_port_register() and access it directly. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5: Remove outdated commentJiri Pirko1-4/+0
The comment is no longer applicable, as the devlink reload and instance cleanup are both protected with devlink instance lock, therefore no race can happen. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5e: TC, Remove redundant parse_attr argumentRoi Dayan1-2/+1
The parse_attr argument is not being used in actions_match_supported_fdb(). remove it. Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Paul Blakey <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5e: Use a simpler comparison for uplink repRoi Dayan1-2/+1
get_route_and_out_devs() is uses the following condition mlx5e_eswitch_rep() && mlx5e_is_uplink_rep() to check if a given netdev is the uplink rep. Alternatively we can just use the straight forward version mlx5e_eswitch_uplink_rep() that only checks if a given netdev is uplink rep. Signed-off-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5: Lag, Add single RDMA device in multiport modeMark Bloch5-16/+49
In MultiPort E-Switch mode a single RDMA is created. This device has multiple RDMA ports that represent the uplink ports that are connected to the E-Switch. Account for this when creating the RDMA device so it has an additional port for the non native uplink. As a side effect of this patch, use shared fdb in multiport eswitch mode. Signed-off-by: Mark Bloch <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5: Lag, set different uplink vport metadata in multiport eswitch modeRoi Dayan5-1/+105
In a follow-up commit multiport eswitch mode will use a shared fdb. In shared fdb there is a single eswitch fdb and traffic could come from any port. to distinguish between the ports set a different metadata per uplink port. Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5: E-Switch, rename bond update function to be reusedRoi Dayan3-7/+7
The vport bond update function is really updating the vport metadata and there is no direct relation to bond. Rename the function to vport metadata update to be used a followup commit. This commit doesn't change any functionality. Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5e: TC, Add peer flow in mpesw modeRoi Dayan6-7/+13
While at it rename mlx5_lag_mpesw_is_activated() to mlx5_lag_is_mpesw() to be consistent with checking if other lag modes are activated. Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14net/mlx5: Lag, Control MultiPort E-Switch single FDB modeRoi Dayan10-74/+99
MultiPort E-Switch builds on newer hardware's capabilities and introduces a mode where a single E-Switch is used and all the vports and physical ports on the NIC are connected to it. The new mode will allow in the future a decrease in the memory used by the driver and advanced features that aren't possible today. This represents a big change in the current E-Switch implantation in mlx5. Currently, by default, each E-Switch manager manages its E-Switch. Steering rules in each E-Switch can only forward traffic to the native physical port associated with that E-Switch. While there are ways to target non-native physical ports, for example using a bond or via special TC rules. None of the ways allows a user to configure the driver to operate by default in such a mode nor can the driver decide to move to this mode by default as it's user configuration-driven right now. While MultiPort E-Switch single FDB mode is the preferred mode, older generations of ConnectX hardware couldn't support this mode so it was never implemented. Now that there is capable hardware present, start the transition to having this mode by default. Introduce a devlink parameter to control MultiPort E-Switch single FDB mode. This will allow users to select this mode on their system right now and in the future will allow the driver to move to this mode by default. Example: $ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \ cmode runtime Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-14Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"Christoph Hellwig7-31/+33
This reverts commit 84d7d462b16dd5f0bf7c7ca9254bf81db2c952a2. Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-02-14Revert "blk-cgroup: pass a gendisk to blkg_lookup"Christoph Hellwig2-18/+18
This reverts commit 821e840c08ad83736eced4037cdad864e95e2584. Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-02-14Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"Christoph Hellwig1-9/+8
This reverts commit 178fa7d49815ea8001f43ade37a22072829fd8ab. Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-02-14Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"Christoph Hellwig2-4/+3
This reverts commit c43332fe028c252a2a28e46be70a530f64fc3c9d as it is not needed without moving to disk references in the blkg. Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-02-14Revert "blk-cgroup: move the cgroup information to struct gendisk"Christoph Hellwig6-54/+50
This reverts commit 3f13ab7c80fdb0ada86a8e3e818960bc1ccbaa59 as a patch it depends on caused a few problems. Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-02-14drm/i915/gen11: Wa_1408615072/Wa_1407596294 should be on GT listMatt Roper1-7/+7
The UNSLICE_UNIT_LEVEL_CLKGATE register programmed by this workaround has 'BUS' style reset, indicating that it does not lose its value on engine resets. Furthermore, this register is part of the GT forcewake domain rather than the RENDER domain, so it should not be impacted by RCS engine resets. As such, we should implement this on the GT workaround list rather than an engine list. Bspec: 19219 Fixes: 3551ff928744 ("drm/i915/gen11: Moving WAs to rcs_engine_wa_init()") Signed-off-by: Matt Roper <[email protected]> Reviewed-by: Gustavo Sousa <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 5f21dc07b52eb54a908e66f5d6e05a87bcb5b049) Signed-off-by: Rodrigo Vivi <[email protected]>
2023-02-14ice: Mention CEE DCBX in code commentZhu Yanjun1-2/+2
From the function ice_parse_org_tlv, CEE DCBX TLV is also supported. So update the comment. Or else, it is confusing. Signed-off-by: Zhu Yanjun <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-02-14ice: Change ice_vsi_realloc_stat_arrays() to voidTony Nguyen1-7/+4
smatch reports: smatch warnings: drivers/net/ethernet/intel/ice/ice_lib.c:3612 ice_vsi_rebuild() warn: missing error code 'ret' If an error is encountered for ice_vsi_realloc_stat_arrays(), ret is not assigned an error value so the goto error path would return success. The function, however, only returns 0 so an error will never be reported; due to this, change the function to return void. Reported-by: kernel test robot <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel)
2023-02-14ice: add support BIG TCP on IPv6Pawel Chmielewski3-0/+7
Enable sending BIG TCP packets on IPv6 in the ice driver using generic ipv6_hopopt_jumbo_remove helper for stripping HBH header. Tested: netperf -t TCP_RR -H 2001:db8:0:f101::1 -- -r80000,80000 -O MIN_LATENCY,P90_LATENCY,P99_LATENCY,TRANSACTION_RATE Tested on two different setups. In both cases, the following settings were applied after loading the changed driver: ip link set dev enp175s0f1np1 gso_max_size 130000 ip link set dev enp175s0f1np1 gro_max_size 130000 ip link set dev enp175s0f1np1 mtu 9000 First setup: Before: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 134 279 410 3961.584 After: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 135 178 216 6093.404 The other setup: Before: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 218 414 478 2944.765 After: Minimum 90th 99th Transaction Latency Percentile Percentile Rate Microseconds Latency Latency Tran/s Microseconds Microseconds 146 238 266 4700.596 Signed-off-by: Pawel Chmielewski <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-02-14ice/ptp: fix the PTP worker retrying indefinitely if the link went downDaniel Vacek1-2/+6
When the link goes down the ice_ptp_tx_tstamp() may loop re-trying to process the packets till the 2 seconds timeout finally drops them. In such a case it makes sense to just drop them right away. Signed-off-by: Daniel Vacek <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-02-14ice: Add GPIO pin support for E823 productsKarol Kolacinski3-0/+90
Add GPIO pin setup for E823, which is only 1PPS input and output. Signed-off-by: Karol Kolacinski <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-02-14wifi: mac80211: fix off-by-one link settingJohannes Berg1-1/+1
The convention for find_first_bit() is 0-based, while ffs() is 1-based, so this is now off-by-one. I cannot reproduce the gcc-9 problem, but since the -1 is now removed, I'm hoping it will still avoid the original issue. Reported-by: Alexander Lobakin <[email protected]> Fixes: 1d8d4af43474 ("wifi: mac80211: avoid u32_encode_bits() warning") Signed-off-by: Johannes Berg <[email protected]>
2023-02-14ixgbe: add double of VLAN header when computing the max MTUJason Xing2-2/+3
Include the second VLAN HLEN into account when computing the maximum MTU size as other drivers do. Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP") Signed-off-by: Jason Xing <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-02-14i40e: add double of VLAN header when computing the max MTUJason Xing1-1/+1
Include the second VLAN HLEN into account when computing the maximum MTU size as other drivers do. Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Signed-off-by: Jason Xing <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-02-14ixgbe: allow to increase MTU to 3K with XDP enabledJason Xing1-9/+16
Recently I encountered one case where I cannot increase the MTU size directly from 1500 to a much bigger value with XDP enabled if the server is equipped with IXGBE card, which happened on thousands of servers in production environment. After applying the current patch, we can set the maximum MTU size to 3K. This patch follows the behavior of changing MTU as i40e/ice does. References: [1] commit 23b44513c3e6 ("ice: allow 3k MTU for XDP") [2] commit 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP") Signed-off-by: Jason Xing <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Tested-by: Chandan Kumar Rout <[email protected]> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-02-14Merge tag 'pm-6.2-rc9' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Add a missing NULL pointer check to the cpufreq drver for Qualcomm platforms (Manivannan Sadhasivam)" * tag 'pm-6.2-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: qcom-hw: Add missing null pointer check
2023-02-14Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-13/+133
Pull kvm fixes from Paolo Bonzini: "Certain AMD processors are vulnerable to a cross-thread return address predictions bug. When running in SMT mode and one of the sibling threads transitions out of C0 state, the other thread gets access to twice as many entries in the RSB, but unfortunately the predictions of the now-halted logical processor are not purged. Therefore, the executing processor could speculatively execute from locations that the now-halted processor had trained the RSB on. The Spectre v2 mitigations cover the Linux kernel, as it fills the RSB when context switching to the idle thread. However, KVM allows a VMM to prevent exiting guest mode when transitioning out of C0 using the KVM_CAP_X86_DISABLE_EXITS capability can be used by a VMM to change this behavior. To mitigate the cross-thread return address predictions bug, a VMM must not be allowed to override the default behavior to intercept C0 transitions. These patches introduce a KVM module parameter that, if set, will prevent the user from disabling the HLT, MWAIT and CSTATE exits" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: Documentation/hw-vuln: Add documentation for Cross-Thread Return Predictions KVM: x86: Mitigate the cross-thread return address predictions bug x86/speculation: Identify processors vulnerable to SMT RSB predictions
2023-02-14EDAC/amd64: Shut up an -Werror,-Wsometimes-uninitialized clang false positiveYazen Ghannam1-1/+1
Reportedly, clang cannot do interprocedural analysis: https://lore.kernel.org/r/20230213-amd64_edac-wsometimes-uninitialized-v1-1-5bde32b89e02@kernel.org and see that those arguments won't be used uninitialized. So, yeah, the code's fine even without this. Normally, such a "fix" won't be applied but that warning gets automatically enabled in -Wall builds and when CONFIG_WERROR is set in allmodconfig builds, the build fails. So shut it up with a minimal fix as this code will see more reorganization very soon. [ bp: Write commit message. ] Signed-off-by: Yazen Ghannam <[email protected]> Signed-off-by: Borislav Petkov (AMD) <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/Y%[email protected]
2023-02-14ACPI: make kobj_type structures constantThomas Weißschuh3-3/+3
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.") the driver core allows the usage of const struct kobj_type. Take advantage of this to constify the structure definitions to prevent modification at runtime. Signed-off-by: Thomas Weißschuh <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-02-14Documentation: firmware-guide: gpio-properties: Clarify Explicit and ImplicitAndy Shevchenko1-11/+24
Clarify the Explicit and Implicit meanings in the table of Pull Bias. While at it, distinguish pull bias keywords used in ACPI by using bold font in the table of the respective terms. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-02-14Merge tag 'opp-updates-6.3' of ↵Rafael J. Wysocki4-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull OPP (Operating Performance Points) updates for 6.3 from Viresh Kumar: "- Add missing 'cache-unified' property in example for kryo OPP bindings (Rob Herring). - Fix error checking in opp_migrate_dentry() (Qi Zheng). - Remove "select SRCU" (Paul E. McKenney). - Let qcom,opp-fuse-level be a 2-long array for qcom SoCs (Konrad Dybcio)." * tag 'opp-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: OPP: fix error checking in opp_migrate_dentry() dt-bindings: opp: v2-qcom-level: Let qcom,opp-fuse-level be a 2-long array drivers/opp: Remove "select SRCU" dt-bindings: opp: opp-v2-kryo-cpu: Add missing 'cache-unified' property in example
2023-02-14Merge tag 'cpufreq-arm-updates-6.3' of ↵Rafael J. Wysocki5-29/+77
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull cpufreq ARM updates for 6.3 from Viresh Kumar: "- Enable thermal cooling for Tegra194 (Yi-Wei Wang). - Register module device table and add missing compatibles for cpufreq-qcom-hw (Nícolas F. R. A. Prado, Abel Vesa and Luca Weiss). - Various dt binding updates for qcom-cpufreq-nvmem and opp-v2-kryo-cpu (Christian Marangi)." * tag 'cpufreq-arm-updates-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: opp-v2-kryo-cpu: enlarge opp-supported-hw maximum dt-bindings: cpufreq: qcom-cpufreq-nvmem: make cpr bindings optional dt-bindings: cpufreq: qcom-cpufreq-nvmem: specify supported opp tables dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM8550 compatible dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing compatibles cpufreq: mediatek-hw: Register to module device table cpufreq: tegra194: Enable CPUFREQ thermal cooling
2023-02-14Merge back cpufreq material for 6.3-rc1.Rafael J. Wysocki20-305/+893
2023-02-14ALSA: hda/realtek: Enable mute/micmute LEDs and speaker support for HP LaptopsAndy Chi1-0/+6
On HP Laptops, requires the ALC245_FIXUP_CS35L41_SPI_2_HP_GPIO_LED quirk to make its audio LEDs and speaker work. Signed-off-by: Andy Chi <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-02-14cpufreq: qcom-hw: Add missing null pointer checkManivannan Sadhasivam1-0/+2
of_device_get_match_data() may return NULL, so add a check to prevent potential null pointer dereference. Issue reported by Qualcomm's internal static analysis tool. Fixes: 4f7961706c63 ("cpufreq: qcom-hw: Move soc_data to struct qcom_cpufreq") Signed-off-by: Manivannan Sadhasivam <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-02-14wifi: mac80211: Fix for Rx fragmented action framesGilad Itzkovitch1-1/+2
The ieee80211_accept_frame() function performs a number of early checks to decide whether or not further processing needs to be done on a frame. One of those checks is the ieee80211_is_robust_mgmt_frame() function. It requires to peek into the frame payload, but because defragmentation does not occur until later on in the receive path, this peek is invalid for any fragment other than the first one. Also, in this scenario there is no STA and so the fragmented frame will be dropped later on in the process and will not reach the upper stack. This can happen with large action frames at low rates, for example, we see issues with DPP on S1G. This change will only check if the frame is robust if it's the first fragment. Invalid fragmented packets will be discarded later after defragmentation is completed. Signed-off-by: Gilad Itzkovitch <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-02-14wifi: mac80211: avoid u32_encode_bits() warningArnd Bergmann1-1/+1
gcc-9 triggers a false-postive warning in ieee80211_mlo_multicast_tx() for u32_encode_bits(ffs(links) - 1, ...), since ffs() can return zero on an empty bitmask, and the negative argument to u32_encode_bits() is then out of range: In file included from include/linux/ieee80211.h:21, from include/net/cfg80211.h:23, from net/mac80211/tx.c:23: In function 'u32_encode_bits', inlined from 'ieee80211_mlo_multicast_tx' at net/mac80211/tx.c:4437:17, inlined from 'ieee80211_subif_start_xmit' at net/mac80211/tx.c:4485:3: include/linux/bitfield.h:177:3: error: call to '__field_overflow' declared with attribute error: value doesn't fit into mask 177 | __field_overflow(); \ | ^~~~~~~~~~~~~~~~~~ include/linux/bitfield.h:197:2: note: in expansion of macro '____MAKE_OP' 197 | ____MAKE_OP(u##size,u##size,,) | ^~~~~~~~~~~ include/linux/bitfield.h:200:1: note: in expansion of macro '__MAKE_OP' 200 | __MAKE_OP(32) | ^~~~~~~~~ Newer compiler versions do not cause problems with the zero argument because they do not consider this a __builtin_constant_p(). It's also harmless since the hweight16() check already guarantees that this cannot be 0. Replace the ffs() with an equivalent find_first_bit() check that matches the later for_each_set_bit() style and avoids the warning. Fixes: 963d0e8d08d9 ("wifi: mac80211: optionally implement MLO multicast TX") Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-02-14devlink: don't allow to change net namespace for FW_ACTIVATE reload actionJiri Pirko1-0/+6
The change on network namespace only makes sense during re-init reload action. For FW activation it is not applicable. So check if user passed an ATTR indicating network namespace change request and forbid it. Signed-off-by: Jiri Pirko <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-02-14hv_netvsc: Check status in SEND_RNDIS_PKT completion messageMichael Kelley1-0/+18
Completion responses to SEND_RNDIS_PKT messages are currently processed regardless of the status in the response, so that resources associated with the request are freed. While this is appropriate, code bugs that cause sending a malformed message, or errors on the Hyper-V host, go undetected. Fix this by checking the status and outputting a rate-limited message if there is an error. Signed-off-by: Michael Kelley <[email protected]> Reviewed-by: Haiyang Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-02-14wifi: mac80211: Don't translate MLD addresses for multicastAndrei Otcheretianski1-1/+2
MLD address translation should be done only for individually addressed frames. Otherwise, AAD calculation would be wrong and the decryption would fail. Fixes: e66b7920aa5ac ("wifi: mac80211: fix initialization of rx->link and rx->link_sta") Signed-off-by: Andrei Otcheretianski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-02-14wifi: cfg80211: call reg_notifier for self managed wiphy from driver hintWen Gong2-0/+6
Currently the regulatory driver does not call the regulatory callback reg_notifier for self managed wiphys. Sometimes driver needs cfg80211 to calculate the info of ieee80211_channel such as flags and power, and driver needs to get the info of ieee80211_channel after hint of driver, but driver does not know when calculation of the info of ieee80211_channel become finished, so add notify to driver in reg_process_self_managed_hint() from cfg80211 is a good way, then driver could get the correct info in callback of reg_notifier. Signed-off-by: Wen Gong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-02-14wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notifyLorenzo Bianconi3-15/+10
Since cfg80211_bss_color_notify() is now always run in non-atomic context, get rid of gfp_t flags in the routine signature and always use GFP_KERNEL for netlink message allocation. Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://lore.kernel.org/r/c687724e7b53556f7a2d9cbe3d11cdcf065cb687.1675255390.git.lorenzo@kernel.org Signed-off-by: Johannes Berg <[email protected]>
2023-02-14wifi: nl80211: Allow authentication frames and set keys on NAN interfaceVinay Gannevaram2-1/+21
Wi-Fi Aware R4 specification defines NAN Pairing which uses PASN handshake to authenticate the peer and generate keys. Hence allow to register and transmit the PASN authentication frames on NAN interface and set the keys to driver or underlying modules on NAN interface. The driver needs to configure the feature flag NL80211_EXT_FEATURE_SECURE_NAN, which also helps userspace modules to know if the driver supports secure NAN. Signed-off-by: Vinay Gannevaram <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-02-14wifi: mac80211: fix non-MLO station associationKarthikeyan Periyasamy1-3/+0
Non-MLO station frames are dropped in Rx path due to the condition check in ieee80211_rx_is_valid_sta_link_id(). In multi-link AP scenario, non-MLO stations try to connect in any of the valid links in the ML AP, where the station valid_links and link_id params are valid in the ieee80211_sta object. But ieee80211_rx_is_valid_sta_link_id() always return false for the non-MLO stations by the assumption taken is valid_links and link_id are not valid in non-MLO stations object (ieee80211_sta), this assumption is wrong. Due to this assumption, non-MLO station frames are dropped which leads to failure in association. Fix it by removing the condition check and allow the link validation check for the non-MLO stations. Fixes: e66b7920aa5a ("wifi: mac80211: fix initialization of rx->link and rx->link_sta") Signed-off-by: Karthikeyan Periyasamy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.