| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add support in the NFIT BLK I/O path for the "latch" flag
defined in the "Get Block NVDIMM Flags" _DSM function:
http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
This flag requires the driver to read back the command register after it
is written in the block I/O path. This ensures that the hardware has
fully processed the new command and moved the aperture appropriately.
Signed-off-by: Ross Zwisler <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
Update the nfit block I/O path to use the new PMEM API and to adhere to
the read/write flows outlined in the "NVDIMM Block Window Driver
Writer's Guide":
http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf
This includes adding support for targeted NVDIMM flushes called "flush
hints" in the ACPI 6.0 specification:
http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
For performance and media durability the mapping for a BLK aperture is
moved to a write-combining mapping which is consistent with
memcpy_to_pmem() and wmb_blk().
Signed-off-by: Ross Zwisler <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
In preparation for fixing the BLK path to properly use "directed
pcommit" enable the unit test infrastructure to emit mock "flush"
tables. Writes to these flush addresses trigger a memory controller to
flush its internal buffers to persistent media, similar to the x86
"pcommit" instruction.
Signed-off-by: Dan Williams <[email protected]>
|
|
The implementation for the new "DIMM Flags" DSM relies on the -ENOTTY
return code to indicate that the flags are unimplimented and to fall
back to a safe default. As is the -ENXIO error code erroneoously
indicates to fail enabling a BLK region.
Signed-off-by: Dan Williams <[email protected]>
|
|
In the 4.2-rc1 merge the default_memremap_pmem() implementation switched
from ioremap_nocache() to ioremap_wt(). Add it to the list of mocked
routines to restore the ability to run the unit tests.
Signed-off-by: Dan Williams <[email protected]>
|
|
The file include/linux/pmem.h was recently created to hold the PMEM API,
and is logically part of the PMEM driver. Add an entry for this file to
MAINTAINERS.
Signed-off-by: Ross Zwisler <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
This reverts commit 63c4fda3c0bb841b1aad1298fc7fe94058fc79f8 as it
causes issues with detecting 3-finger taps.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100481
Cc: [email protected]
Acked-by: Benjamin Tissoires <[email protected]>
|
|
We currently set x27 in compat_sys_sigreturn_wrapper and
compat_sys_rt_sigreturn_wrapper, similarly to what we do with r8/why on
32-bit ARM, in an attempt to prevent sigreturns from being restarted.
However, on arm64 we have always used pt_regs::syscallno for syscall
restarting (for both native and compat tasks), and x27 is never
inspected again before being overwritten in kernel_exit.
This patch removes the pointless register assignments.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
[ 68.196974] WARNING: CPU: 1 PID: 2140 at arch/x86/kvm/x86.c:3161 kvm_arch_vcpu_ioctl+0xe88/0x1340 [kvm]()
[ 68.196975] Modules linked in: snd_hda_codec_hdmi i915 rfcomm bnep bluetooth i2c_algo_bit rfkill nfsd drm_kms_helper nfs_acl nfs drm lockd grace sunrpc fscache snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_dummy snd_seq_oss x86_pkg_temp_thermal snd_seq_midi kvm_intel snd_seq_midi_event snd_rawmidi kvm snd_seq ghash_clmulni_intel fuse snd_timer aesni_intel parport_pc ablk_helper snd_seq_device cryptd ppdev snd lp parport lrw dcdbas gf128mul i2c_core glue_helper lpc_ich video shpchp mfd_core soundcore serio_raw acpi_cpufreq ext4 mbcache jbd2 sd_mod crc32c_intel ahci libahci libata e1000e ptp pps_core
[ 68.197005] CPU: 1 PID: 2140 Comm: qemu-system-x86 Not tainted 4.2.0-rc1+ #2
[ 68.197006] Hardware name: Dell Inc. OptiPlex 7020/0F5C5X, BIOS A03 01/08/2015
[ 68.197007] ffffffffa03b0657 ffff8800d984bca8 ffffffff815915a2 0000000000000000
[ 68.197009] 0000000000000000 ffff8800d984bce8 ffffffff81057c0a 00007ff6d0001000
[ 68.197010] 0000000000000002 ffff880211c1a000 0000000000000004 ffff8800ce0288c0
[ 68.197012] Call Trace:
[ 68.197017] [<ffffffff815915a2>] dump_stack+0x45/0x57
[ 68.197020] [<ffffffff81057c0a>] warn_slowpath_common+0x8a/0xc0
[ 68.197022] [<ffffffff81057cfa>] warn_slowpath_null+0x1a/0x20
[ 68.197029] [<ffffffffa037bed8>] kvm_arch_vcpu_ioctl+0xe88/0x1340 [kvm]
[ 68.197035] [<ffffffffa037aede>] ? kvm_arch_vcpu_load+0x4e/0x1c0 [kvm]
[ 68.197040] [<ffffffffa03696a6>] kvm_vcpu_ioctl+0xc6/0x5c0 [kvm]
[ 68.197043] [<ffffffff811252d2>] ? perf_pmu_enable+0x22/0x30
[ 68.197044] [<ffffffff8112663e>] ? perf_event_context_sched_in+0x7e/0xb0
[ 68.197048] [<ffffffff811a6882>] do_vfs_ioctl+0x2c2/0x4a0
[ 68.197050] [<ffffffff8107bf33>] ? finish_task_switch+0x173/0x220
[ 68.197053] [<ffffffff8123307f>] ? selinux_file_ioctl+0x4f/0xd0
[ 68.197055] [<ffffffff8122cac3>] ? security_file_ioctl+0x43/0x60
[ 68.197057] [<ffffffff811a6ad9>] SyS_ioctl+0x79/0x90
[ 68.197060] [<ffffffff81597e57>] entry_SYSCALL_64_fastpath+0x12/0x6a
[ 68.197061] ---[ end trace 558a5ebf9445fc80 ]---
After commit (0c4109bec0 'x86/fpu/xstate: Fix up bad get_xsave_addr()
assumptions'), there is no assumption an xsave bit is present in the
hardware (pcntxt_mask) that it is always present in a given xsave buffer.
An enabled state to be present on 'pcntxt_mask', but *not* in 'xstate_bv'
could happen when the last 'xsave' did not request that this feature be
saved (unlikely) or because the "init optimization" caused it to not be
saved. This patch kill the assumption.
Signed-off-by: Wanpeng Li <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Currently guest MTRR is avoided if kvm_is_reserved_pfn returns true.
However, the guest could prefer a different page type than UC for
such pages. A good example is that pass-throughed VGA frame buffer is
not always UC as host expected.
This patch enables full use of virtual guest MTRRs.
Suggested-by: Xiao Guangrong <[email protected]>
Tested-by: Joerg Roedel <[email protected]> (on AMD)
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When hardware supports the g_pat VMCB field, we can use it for emulating
the PAT configuration that the guest configures by writing to the
corresponding MSR.
Signed-off-by: Jan Kiszka <[email protected]>
Tested-by: Joerg Roedel <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Right now, NPT page attributes are not used, and the final page
attribute depends solely on gPAT (which however is not synced
correctly), the guest MTRRs and the guest page attributes.
However, we can do better by mimicking what is done for VMX.
In the absence of PCI passthrough, the guest PAT can be ignored
and the page attributes can be just WB. If passthrough is being
used, instead, keep respecting the guest PAT, and emulate the guest
MTRRs through the PAT field of the nested page tables.
The only snag is that WP memory cannot be emulated correctly,
because Linux's default PAT setting only includes the other types.
Tested-by: Joerg Roedel <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
If there are no assigned devices, the guest PAT are not providing
any useful information and can be overridden to writeback; VMX
always does this because it has the "IPAT" bit in its extended
page table entries, but SVM does not have anything similar.
Hook into VFIO and legacy device assignment so that they
provide this information to KVM.
Reviewed-by: Alex Williamson <[email protected]>
Tested-by: Joerg Roedel <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
fpu_activate is called outside of vcpu_load(), which means it should not
touch VMCS, but fpu_activate needs to. Avoid the call by moving it to a
point where we know that the guest needs eager FPU and VMCS is loaded.
This will get rid of the following trace
vmwrite error: reg 6800 value 0 (err 1)
[<ffffffff8162035b>] dump_stack+0x19/0x1b
[<ffffffffa046c701>] vmwrite_error+0x2c/0x2e [kvm_intel]
[<ffffffffa045f26f>] vmcs_writel+0x1f/0x30 [kvm_intel]
[<ffffffffa04617e5>] vmx_fpu_activate.part.61+0x45/0xb0 [kvm_intel]
[<ffffffffa0461865>] vmx_fpu_activate+0x15/0x20 [kvm_intel]
[<ffffffffa0560b91>] kvm_arch_vcpu_create+0x51/0x70 [kvm]
[<ffffffffa0548011>] kvm_vm_ioctl+0x1c1/0x760 [kvm]
[<ffffffff8118b55a>] ? handle_mm_fault+0x49a/0xec0
[<ffffffff811e47d5>] do_vfs_ioctl+0x2e5/0x4c0
[<ffffffff8127abbe>] ? file_has_perm+0xae/0xc0
[<ffffffff811e4a51>] SyS_ioctl+0xa1/0xc0
[<ffffffff81630949>] system_call_fastpath+0x16/0x1b
(Note: we also unconditionally activate FPU in vmx_vcpu_reset(), so the
removed code added nothing.)
Fixes: c447e76b4cab ("kvm/fpu: Enable eager restore kvm FPU for MPX")
Cc: <[email protected]>
Reported-by: Vlastimil Holer <[email protected]>
Signed-off-by: Radim Krčmář <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The call to get_mt_mask was really using kvm_is_reserved_pfn to
detect an MMIO-backed page. In this case, we want "false" to be
returned for the zero page.
Reintroduce a separate kvm_is_mmio_pfn predicate for this use
only.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Commit a7c6e76feeb1 ("drm/imx: switch to use media bus formats") accidentally
replaced IPU_PIX_FMT_GBR24 with MEDIA_BUS_FMT_YUV8_1X24 instead of the correct
MEDIA_BUS_FMT_GBR888_1X24. This patch is needed to fix VGA output in i.MX53.
Signed-off-by: Philipp Zabel <[email protected]>
|
|
Even with the oops fixed by a previous patch, the system still fails to
kexec, due to a stuck chained interrupt locking the system. We must
disable the child interrupts prior to setting up the irq chip to ensure
we don't get stuck here.
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
The parallel-display driver used an undocumented, non-standard property
"fsl,panel" to optionally associate with a drm_panel device. This patch
fixes the driver to use the same OF graph bindings as the LDB driver
instead:
parallel-display {
compatible = "fsl,imx-parallel-display";
...
port@1 {
reg = <1>;
parallel_out: endpoint {
remote_endpoint = <&panel_in>;
};
};
};
panel {
...
port {
panel_in: endpoint {
remote-endpoint = <¶llel_out>;
};
};
};
Signed-off-by: Philipp Zabel <[email protected]>
Tested-by: Gary Bisson <[email protected]>
|
|
We were using the native syscall and that results in subtle breakage.
This is the same issue as fixed in 077d0e65618f27b2199d622e12ada6d8f3dbd862
(MIPS: N32: Use compat getsockopt syscall) but that commit did fix it only
for N32.
Signed-off-by: Ralf Baechle <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100291
|
|
The L2 cache in the I6400 core has 16 ways, so extend the way_string
array to take such caches into account.
[[email protected]: Other already supported CPUs are free to support
more than 8 ways of cache as well.]
Signed-off-by: Paul Burton <[email protected]>
Signed-off-by: Markos Chandras <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10640/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Implement the mips_cdmm_phys_base() platform callback to provide a
default Common Device Memory Map (CDMM) physical base address for the
Pistachio SoC. This allows the CDMM in each VPE to be configured and
probed for devices, such as the Fast Debug Channel (FDC).
The physical address chosen is just below the default CPC address, which
appears to also be unallocated.
The FDC IRQ is also usable on Pistachio, and is routed through the GIC,
so implement the get_c0_fdc_int() platform callback using
gic_get_c0_fdc_int(), so the FDC driver doesn't have to fall back to
polling.
Signed-off-by: James Hogan <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Andrew Bresticker <[email protected]>
Cc: James Hartley <[email protected]>
Cc: [email protected]
Reviewed-by: Andrew Bresticker <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/9749/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Wider testing reveals that the Fast Debug Channel (FDC) interrupt is
routed through the GIC just fine on Pistachio SoC, even though it
contains interAptiv cores. Clearly the FDC interrupt routing problems
previously observed on interAptiv and proAptiv cores are specific to the
Malta FPGA bitstreams.
Move the workaround for interAptiv and proAptiv out of
gic_get_c0_fdc_int() in the GIC irqchip driver into Malta's
get_c0_fdc_int() platform callback, to allow the Pistachio SoC to use
the FDC interrupt.
Signed-off-by: James Hogan <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Andrew Bresticker <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: [email protected]
Reviewed-by: Andrew Bresticker <[email protected]>
Cc: James Hartley <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/9748/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
MT_SMP is not the only SMP option for MT cores. The MT_SMP option
allows more than one VPE per core to appear as a secondary CPU in the
system. Because of how CM works, it propagates the address-based
cache ops to the secondary cores but not the index-based ones.
Because of that, the code does not use IPIs to flush the L1 caches on
secondary cores because the CM would have done that already. However,
the CM functionality is independent of the type of SMP kernel so even in
non-MT kernels, IPIs are not necessary. As a result of which, we change
the conditional to depend on the CM presence. Moreover, since VPEs on
the same core share the same L1 caches, there is no need to send an
IPI on all of them so we calculate a suitable cpumask with only one
VPE per core.
Signed-off-by: Markos Chandras <[email protected]>
Cc: <[email protected]> # 3.15+
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/10654/
Signed-off-by: Ralf Baechle <[email protected]>
|
|
Mikulas reported his K6-3 not booting. This is because the
static_key API confusion struck and bit Andy, this wants to be
static_key_false().
Reported-by: Mikulas Patocka <[email protected]>
Tested-by: Mikulas Patocka <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Gerst <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Valdis Kletnieks <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: hillf.zj <[email protected]>
Fixes: a66734297f78 ("perf/x86: Add /sys/devices/cpu/rdpmc=2 to allow rdpmc for all tasks")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix 'perf top -u username', where not enough memory per thread_map
entry was being allocated nor was being initialized, causing a
segfault (Arnaldo Carvalho de Melo)
- Fix locking lockup using 32-bit compat vdso (Adrian Hunter)
- Fix shadow declaration of 'close' with older build environments (Jiri Olsa)
- Make the 'clean' target do a better job, removing some more temp files (Riku Voipio)
- The python binding also has a MANIFEST like file where we list the files that
need to be built and linked to form the resulting python shared object module
file. And it has an entry for rbtree.c that still pointed to the one in the
kernel sources, fix it by also removing one level of indirection so that it
uses the tools/lib/rbtree.c copy. (Arnaldo Carvalho de Melo)
- For the same reasons as for rbtree.c, copy the kernel lib/hweight.c file to
tools/lib/, sanitizing it in the process to remove kernel specific stuff like
EXPORT_SYMBOL() lines and the linux/export.h include reference, as that file
doesn't exist anymore in tools/include/linux. (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes
omapdrm fixes for 4.2
Small fixes for omapdrm, including:
* Fix packed 24 bit color formats
* Ensure the planes are inside the crtc
* Handle out-of-dma-memory error
* tag 'omapdrm-4.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
drm/omap: replace ALIGN(PAGE_SIZE) by PAGE_ALIGN
drm/omap: fix align_pitch() for 24 bits per pixel
drm/omap: fix omap_gem_put_paddr() error handling
drm/omap: fix omap_framebuffer_unpin() error handling
drm/omap: increase DMM transaction timeout
drm/omap: check that plane is inside crtc
drm/omap: return error if dma_alloc_writecombine fails
|
|
git://anongit.freedesktop.org/drm-intel into drm-fixes
Pile of fixes for either 4.2 issues or cc: stable. This should fix the 2nd
kind of WARNING Linus's been seeing, please ask him to scream if that's
not the case.
* tag 'drm-intel-fixes-2015-07-09' of git://anongit.freedesktop.org/drm-intel:
Revert "drm/i915: Allocate context objects from stolen"
drm/i915: Declare the swizzling unknown for L-shaped configurations
drm/i915: Use crtc_state->active in primary check_plane func
drm/i915: Check crtc->active in intel_crtc_disable_planes
drm/i915: Restore all GGTT VMAs on resume
drm/i915/chv: fix HW readout of the port PLL fractional divider
|
|
git://people.freedesktop.org/~gabbayo/linux into drm-fixes
A single fix so far for 4.2:
- checking a pointer is not null before using it
* tag 'drm-amdkfd-fixes-2015-07-09' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: validate pdd where it acquired first
|
|
into drm-fixes
radeon and amdgpu fixes for 4.2. All over the place:
- fix cursor corruption on resume and re-enable no VT switch on suspend
- vblank fixes
- fix gpuvm error messages
- misc other fixes
* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: disable vce init on cayman (v2)
drm/amdgpu: fix timeout calculation
drm/radeon: check if BO_VA is set before adding it to the invalidation list
drm/radeon: allways add the VM clear duplicate
Revert "Revert "drm/radeon: dont switch vt on suspend""
drm/radeon: Fold radeon_set_cursor() into radeon_show_cursor()
drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2)
drm/radeon: Clean up reference counting and pinning of the cursor BOs
drm/radeon: fix underflow in r600_cp_dispatch_texture()
drm/radeon: default to 2048 MB GART size on SI+
drm/radeon: fix HDP flushing
drm/radeon: use RCU query for GEM_BUSY syscall
drm/amdgpu: Handle irqs only based on irq ring, not irq status regs.
drm/radeon: Handle irqs only based on irq ring, not irq status regs.
|
|
Commit c29390c6dfee ("xps: must clear sender_cpu before forwarding")
fixed an issue in normal forward path, caused by sender_cpu & napi_id
skb fields being an union.
Bridge is another point where skb can be forwarded, so we need
the same cure.
Bug triggers if packet was received on a NIC using skb_mark_napi_id()
Fixes: 2bd82484bb4c ("xps: fix xps for stacked devices")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Bob Liu <[email protected]>
Tested-by: Bob Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Value returned by devm_ioremap_resource() was checked for non-NULL but
devm_ioremap_resource() returns IOMEM_ERR_PTR, not NULL. In case of
error this could lead to dereference of ERR_PTR.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Cc: <[email protected]>
Fixes: 46aa27df8853 ("net: axienet: Use devm_* calls")
Reviewed-by: Sören Brinkmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The pointer to an AFU in the adapter's list of AFUs can be null
if we're in the process of removing AFUs. The afu_list_lock
doesn't guard against this.
Say we have 2 slices, and we're in the process of removing cxl.
- We remove the AFUs in order (see cxl_remove). In cxl_remove_afu
for AFU 0, we take the lock, set adapter->afu[0] = NULL, and
release the lock.
- Then we get an slbia. In cxl_slbia we take the lock, and set
afu = adapter->afu[0], which is NULL.
- Therefore our attempt to check afu->enabled will blow up.
Therefore, check if afu is a null pointer before dereferencing it.
Cc: [email protected]
Signed-off-by: Daniel Axtens <[email protected]>
Acked-by: Michael Neuling <[email protected]>
Acked-by: Ian Munsie <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
|
|
kernel
Zoltan Boszormenyi reported this regression:
"There's a Realtek RTL8111/8168/8411 (PCI ID 10ec:8168, Subsystem ID
1565:230e) network chip on the mainboard. After the r8169 driver loaded
the IRQs in the machine went berserk. Keyboard keypressed arrived with
considerable latency and duplicated, so no real work was possible.
The machine responded to the power button but didn't actually power
down. It just stuck at the powering down message. I had to press the
power button for 4 seconds to power it down.
The computer is a POS machine with a big battery inside. Because of this,
either ACPI or the Realtek chip kept the bad state and after rebooting,
the network chip didn't even show up in lspci. Not even the PXE ROM
announced itself during boot. I had to disconnect the battery to beat
some sense back to the computer.
The regression happens with 4.0.5, 4.1.0-rc8 and 4.1.0-final. 3.18.16 was
good."
The regression is caused by commit 593669c2ac0f (x86/PCI/ACPI: Use common
ACPI resource interfaces to simplify implementation). Since commit
593669c2ac0f, x86 PCI ACPI host bridge driver validates ACPI resources by
first converting an ACPI resource to a 'struct resource' structure and
then applying checks against the converted resource structure. The 'start'
and 'end' fields in 'struct resource' are defined to be type of
resource_size_t, which may be 32 bits or 64 bits depending on
CONFIG_PHYS_ADDR_T_64BIT.
This may cause incorrect resource validation results with 32-bit kernels
because 64-bit ACPI resource descriptors may get truncated when converting
to 32-bit 'start' and 'end' fields in 'struct resource'. It eventually
affects PCI resource allocation subsystem and makes some PCI devices and
the system behave abnormally due to incorrect resource assignment.
So enhance the ACPI resource parsing interfaces to ignore ACPI resource
descriptors with address/offset above 4G when running in 32-bit mode.
With the fix applied, the behavior of the machine was restored to how
3.18.16 worked, i.e. the memory range that is over 4GB is ignored again,
and lspci -vvxxx shows that everything is at the same memory window as
they were with 3.18.16.
Reported-and-tested-by: Boszormenyi Zoltan <[email protected]>
Fixes: 593669c2ac0f (x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation)
Signed-off-by: Jiang Liu <[email protected]>
Cc: 4.0+ <[email protected]> # 4.0+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Users of freq table may want to access it for any CPU from
policy->related_cpus mask. One such user is cpu-cooling layer. It gets a
list of 'clip_cpus' (equivalent to policy->related_cpus) during
registration and tries to get freq_table for the first CPU of this mask.
If the CPU, for which it tries to fetch freq_table, is offline,
cpufreq_frequency_get_table() fails. This happens because it relies on
cpufreq_cpu_get_raw() for its functioning which returns policy only for
online CPUs.
The fix is to access the policy data structure for the given CPU
directly (which also returns a valid policy for offline CPUs), but the
policy itself has to be active (meaning that at least one CPU using it
is online) for the frequency table to be returned.
Because we will be using 'cpufreq_cpu_data' now, which is internal to
the cpufreq core, move cpufreq_frequency_get_table() to cpufreq.c.
Reported-and-tested-by: Pi-Cheng Chen <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
When all CPUs of a policy are hot-unplugged, we EXIT the governor but
don't mark policy->governor as NULL. This was done in order to keep last
used governor's information intact in sysfs, while the CPUs are offline.
But we also need to clear policy->governor when restoring the policy.
Because policy->governor still points to the last governor while policy
is restored, following sequence of event happens:
- cpufreq_init_policy() called while restoring policy
- find_governor() matches last_governor string for present governors and
returns last used governor's pointer, say ondemand. policy->governor
already has the same address, unless the governor was removed in
between.
- cpufreq_set_policy() is called with both old/new policies governor set
as ondemand.
- Because governors matched, we skip governor initialization and return
after calling __cpufreq_governor(CPUFREQ_GOV_LIMITS). Because the
governor wasn't initialized for this policy, it returned -EBUSY.
- cpufreq_init_policy() exits the policy on this error, but doesn't
destroy it properly (should be fixed separately).
- And so we enter a scenario where the policy isn't completely
initialized but used.
Fix this by setting policy->governor to NULL while restoring the policy.
Reported-and-tested-by: Pi-Cheng Chen <[email protected]>
Reported-and-tested-by: "Jon Medhurst (Tixy)" <[email protected]>
Reported-and-tested-by: Steven Rostedt <[email protected]>
Fixes: 18bf3a124ef8 (cpufreq: Mark policy->governor = NULL for inactive policies)
Signed-off-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge "omap fixes against v4.2-rc1" from Tony Lindgren:
Minor fixes for omaps against v4.2-rc1. Mostly just minor dts changes
except for a GPMC fix to not use names for probing devices. Also a
one liner clean-up to remove unecessary return from a void function.
The summary for the changes being:
- Fix probe for GPMC devices by reoving limitations based on device
name
- Remove unnecessary return from a void function
- Revert beaglebone RTC sleep fix, we now have a better fix merged
- Add am4372 EMIF node to fix a warning
- Add am57xx-beagle-x15 power supply to fix USB2 if USB1 is disabled
- Disable rfbi for am4372 as it does not have a driver
* tag 'omap-for-v4.2/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am4372.dtsi: disable rfbi
ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2
ARM: dts: am4372: Add emif node
Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep"
ARM: OMAP2+: Remove unnessary return statement from the void function, omap2_show_dma_caps
memory: omap-gpmc: Fix parsing of devices
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Merge "Allwinner late changes for 4.2" from Maxime Ripard:
Allwinner late changes for 4.2
A bunch of defconfig changes, and some patches to make the Allwinner H3 and
A33 boot properly.
* tag 'sunxi-late-for-4.2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Enable simplefb in the defconfig
ARM: Remove deprecated symbol from defconfig files
ARM: sunxi: Add Machine support for A33
ARM: sunxi: Introduce Allwinner H3 support
Documentation: sunxi: Update Allwinner SoC documentation
|
|
Oleg Nesterov says:
====================
net: pktgen: fix race between pktgen_thread_worker() and kthread_stop()
I am not familiar with this code and I have no idea how to test
these changes, so 2/2 comes as a separate change. 1/2 looks like
the obvious bugfix, and probably candidate for -stable.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
pktgen_thread_worker() doesn't need to wait for kthread_stop(), it
can simply exit. Just pktgen_create_thread() and pg_net_exit() should
do get_task_struct()/put_task_struct(). kthread_stop(dead_thread) is
fine.
Signed-off-by: Oleg Nesterov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
pktgen_thread_worker() is obviously racy, kthread_stop() can come
between the kthread_should_stop() check and set_current_state().
Signed-off-by: Oleg Nesterov <[email protected]>
Reported-by: Jan Stancek <[email protected]>
Reported-by: Marcelo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
NCM specs are not actually mandating a specific position in the frame for
the NDP (Network Datagram Pointer). However, some Huawei devices will
ignore our aggregates if it is not placed after the datagrams it points
to. Add support for doing just this, in a per-device configurable way.
While at it, update NCM subdrivers, disabling this functionality in all of
them, except in huawei_cdc_ncm where it is enabled instead.
We aren't making any distinction between different Huawei NCM devices,
based on what the vendor driver does. Standard NCM devices are left
unaffected: if they are compliant, they should be always usable, still
stay on the safe side.
This change has been tested and working with a Huawei E3131 device (which
works regardless of NDP position), a Huawei E3531 (also working both
ways) and an E3372 (which mandates NDP to be after indexed datagrams).
V1->V2:
- corrected wrong NDP acronym definition
- fixed possible NULL pointer dereference
- patch cleanup
V2->V3:
- Properly account for the NDP size when writing new packets to SKB
Signed-off-by: Enrico Mioso <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In commit 'c03abd84634d ("net: ethernet: cpsw: don't requests
IRQs we don't use")', common isr is split into tx and rx, but
in rx isr tx interrupt is also disabledi in cpsw_disable_irq().
So tx interrupts are not handled during rx interrupts and rx
napi completion and results in poor tx performance by 40Mbps.
Fixing by disabling only rx interrupt in rx isr.
Cc: Felipe Balbi <[email protected]>
Cc: <[email protected]> # v4.0+
Signed-off-by: Mugunthan V N <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use eth_hw_addr_random() instead of calling random_ether_addr().
Here, this change is setting addr_assign_type to NET_ADDR_RANDOM.
The Coccinelle semantic patch that performs this transformation
is as follows:
@@
identifier a,b;
@@
-random_ether_addr(a->b);
+eth_hw_addr_random(a);
Signed-off-by: Vaishali Thakkar <[email protected]>
Tested-by: Florian Fainelli <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Put tick_freeze() under RCU_NONIDLE() to prevent RCU from complaining
about suspicious RCU usage in idle by trace_suspend_resume() called
from there.
While at it, fix a comment related to another usage of RCU_NONIDLE()
in enter_freeze_proper().
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Paul E. McKenney <[email protected]>
|
|
e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg
data") updated per-blkcg policy data to be dynamically allocated.
When a policy is registered, its policy data aren't created. Instead,
when the policy is activated on a queue, the policy data are allocated
if there are blkg's (blkcg_gq's) which are attached to a given blkcg.
This is buggy. Consider the following scenario.
1. A blkcg is created. No blkg's attached yet.
2. The policy is registered. No policy data is allocated.
3. The policy is activated on a queue. As the above blkcg doesn't
have any blkg's, it won't allocate the matching blkcg_policy_data.
4. An IO is issued from the blkcg and blkg is created and the blkcg
still doesn't have the matching policy data allocated.
With cfq-iosched, this leads to an oops.
It also doesn't free policy data on policy unregistration assuming
that freeing of all policy data on blkcg destruction should take care
of it; however, this also is incorrect.
1. A blkcg has policy data.
2. The policy gets unregistered but the policy data remains.
3. Another policy gets registered on the same slot.
4. Later, the new policy tries to allocate policy data on the previous
blkcg but the slot is already occupied and gets skipped. The
policy ends up operating on the policy data of the previous policy.
There's no reason to manage blkcg_policy_data lazily. The reason we
do lazy allocation of blkg's is that the number of all possible blkg's
is the product of cgroups and block devices which can reach a
surprising level. blkcg_policy_data is contrained by the number of
cgroups and shouldn't be a problem.
This patch makes blkcg_policy_data to be allocated for all existing
blkcg's on policy registration and freed on unregistration and removes
blkcg_policy_data handling from policy [de]activation paths. This
makes that blkcg_policy_data are created and removed with the policy
they belong to and fixes the above described problems.
Signed-off-by: Tejun Heo <[email protected]>
Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data")
Cc: Vivek Goyal <[email protected]>
Cc: Arianna Avanzini <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Add all_blkcgs list goes through blkcg->all_blkcgs_node and is
protected by blkcg_pol_mutex. This will be used to fix
blkcg_policy_data allocation bug.
Signed-off-by: Tejun Heo <[email protected]>
Cc: Vivek Goyal <[email protected]>
Cc: Arianna Avanzini <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
blkcg_policy[]
An entry in blkcg_policy[] is stable while there are non-bypassing
in-flight IOs on a request_queue which has the policy activated. This
is why most derefs of blkcg_policy[] don't need explicit locking;
however, blkcg_css_alloc() isn't invoked from IO path and thus doesn't
have this protection and may race policies being added and removed.
Fix it by adding explicit blkcg_pol_mutex protection around
blkcg_policy[] iteration in blkcg_css_alloc().
Signed-off-by: Tejun Heo <[email protected]>
Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data")
Cc: Vivek Goyal <[email protected]>
Cc: Arianna Avanzini <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
blkcg_pol_mutex primarily protects the blkcg_policy array. It also
protects cgroup file type [un]registration during policy addition /
removal. This puts blkcg_pol_mutex outside cgroup internal
synchronization and in turn makes it impossible to grab from blkcg's
cgroup methods as that leads to cyclic dependency.
Another problematic dependency arising from this is through cgroup
interface file deactivation. Removing a cftype requires removing all
files of the type which in turn involves draining all on-going
invocations of the file methods. This means that an interface file
implementation can't grab blkcg_pol_mutex as draining can lead to AA
deadlock.
blkcg_reset_stats() is already in this situation. It currently
trylocks blkcg_pol_mutex and then unwinds and retries the whole
operation on failure, which is cumbersome at best. It has a lengthy
comment explaining how cgroup internal synchronization is involved and
expected to be updated but as explained above this doesn't need cgroup
internal locking to deadlock. It's a self-contained AA deadlock.
The described circular dependencies can be easily broken by moving
cftype [un]registration out of blkcg_pol_mutex and protect them with
an outer mutex. This patch introduces blkcg_pol_register_mutex which
wraps entire policy [un]registration including cftype operations and
shrinks blkcg_pol_mutex critical section. This also makes the trylock
dancing in blkcg_reset_stats() unnecessary. Removed.
This patch is necessary for the following blkcg_policy_data allocation
bug fixes.
Signed-off-by: Tejun Heo <[email protected]>
Cc: Vivek Goyal <[email protected]>
Cc: Arianna Avanzini <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Merge hpfs updates from Mikulas Patocka.
Mainly fstrim support, with some minor other cleanups.
These were actually sent during the merge window, but I wanted to wait
for the FSTRIM compat handling cleanup before applying them. Mikulas
sent that earlier today.
* emailed patches from Mikulas Patocka <[email protected]>:
hpfs: hpfs_error: Remove static buffer, use vsprintf extension %pV instead
hpfs: kstrdup() out of memory handling
hpfs: Remove unessary cast
hpfs: add fstrim support
|