aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-03-18Revert "PM: ACPI: reboot: Use S5 for reboot"Josef Bacik1-2/+0
This reverts commit d60cd06331a3566d3305b3c7b566e79edf4e2095. This patch causes a panic when rebooting my Dell Poweredge r440. I do not have the full panic log as it's lost at that stage of the reboot and I do not have a serial console. Reverting this patch makes my system able to reboot again. Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-03-18io_uring: don't leak creds on SQO attach errorPavel Begunkov1-11/+6
Attaching to already dead/dying SQPOLL task is disallowed in io_sq_offload_create(), but cleanup is hand coded by calling io_put_sq_data()/etc., that miss to put ctx->sq_creds. Defer everything to error-path io_sq_thread_finish(), adding ctx->sqd_list in the error case as well as finish will handle it. Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-03-18io_uring: use typesafe pointers in io_uring_taskStefan Metzmacher1-2/+2
Signed-off-by: Stefan Metzmacher <[email protected]> Link: https://lore.kernel.org/r/ce2a598e66e48347bb04afbaf2acc67c0cc7971a.1615809009.git.metze@samba.org Signed-off-by: Jens Axboe <[email protected]>
2021-03-18io_uring: remove structures from include/linux/io_uring.hStefan Metzmacher3-26/+25
Link: https://lore.kernel.org/r/8c1d14f3748105f4caeda01716d47af2fa41d11c.1615809009.git.metze@samba.org Signed-off-by: Stefan Metzmacher <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-03-18io_uring: imply MSG_NOSIGNAL for send[msg]()/recv[msg]() callsStefan Metzmacher1-4/+4
We never want to generate any SIGPIPE, -EPIPE only is much better. Signed-off-by: Stefan Metzmacher <[email protected]> Link: https://lore.kernel.org/r/38961085c3ec49fd21550c7788f214d1ff02d2d4.1615908477.git.metze@samba.org Signed-off-by: Jens Axboe <[email protected]>
2021-03-18selftests: kvm: Add basic Hyper-V clocksources testsVitaly Kuznetsov3-0/+262
Introduce a new selftest for Hyper-V clocksources (MSR-based reference TSC and TSC page). As a starting point, test the following: 1) Reference TSC is 1Ghz clock. 2) Reference TSC and TSC page give the same reading. 3) TSC page gets updated upon KVM_SET_CLOCK call. 4) TSC page does not get updated when guest opted for reenlightenment. 5) Disabled TSC page doesn't get updated. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> [Add a host-side test using TSC + KVM_GET_MSR too. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2021-03-18ALSA: usb-audio: Fix unintentional sign extension issueColin Ian King1-2/+2
The shifting of the u8 integer device by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to a 64 bit unsigned long. In the event that the top bit of device is set then all then all the upper 32 bits of the unsigned long will end up as also being set because of the sign-extension. Fix this by casting device to an unsigned long before the shift. Addresses-Coverity: ("Unintended sign extension") Fixes: a07df82c7990 ("ALSA: usb-audio: Add DJM750 to Pioneer mixer quirk") Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-03-18Merge tag 'asoc-fix-v5.12-rc2' of ↵Takashi Iwai31-286/+232
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.12 Quite a lot of mostly platform specific fixes here, the only one which is generic is a fix for regressions on devices with more complex clocking support with simple-card. There's also a few new device IDs and platform quirks.
2021-03-18KVM: x86: hyper-v: Don't touch TSC page values when guest opted for ↵Vitaly Kuznetsov1-1/+25
re-enlightenment When guest opts for re-enlightenment notifications upon migration, it is in its right to assume that TSC page values never change (as they're only supposed to change upon migration and the host has to keep things as they are before it receives confirmation from the guest). This is mostly true until the guest is migrated somewhere. KVM userspace (e.g. QEMU) will trigger masterclock update by writing to HV_X64_MSR_REFERENCE_TSC, by calling KVM_SET_CLOCK,... and as TSC value and kvmclock reading drift apart (even slightly), the update causes TSC page values to change. The issue at hand is that when Hyper-V is migrated, it uses stale (cached) TSC page values to compute the difference between its own clocksource (provided by KVM) and its guests' TSC pages to program synthetic timers and in some cases, when TSC page is updated, this puts all stimer expirations in the past. This, in its turn, causes an interrupt storm and L2 guests not making much forward progress. Note, KVM doesn't fully implement re-enlightenment notification. Basically, the support for reenlightenment MSRs is just a stub and userspace is only expected to expose the feature when TSC scaling on the expected destination hosts is available. With TSC scaling, no real re-enlightenment is needed as TSC frequency doesn't change. With TSC scaling becoming ubiquitous, it likely makes little sense to fully implement re-enlightenment in KVM. Prevent TSC page from being updated after migration. In case it's not the guest who's initiating the change and when TSC page is already enabled, just keep it as it is: TSC value is supposed to be preserved across migration and TSC frequency can't change with re-enlightenment enabled. The guest is doomed anyway if any of this is not true. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-03-18KVM: x86: hyper-v: Track Hyper-V TSC page statusVitaly Kuznetsov2-14/+52
Create an infrastructure for tracking Hyper-V TSC page status, i.e. if it was updated from guest/host side or if we've failed to set it up (because e.g. guest wrote some garbage to HV_X64_MSR_REFERENCE_TSC) and there's no need to retry. Also, in a hypothetical situation when we are in 'always catchup' mode for TSC we can now avoid contending 'hv->hv_lock' on every guest enter by setting the state to HV_TSC_PAGE_BROKEN after compute_tsc_page_parameters() returns false. Check for HV_TSC_PAGE_SET state instead of '!hv->tsc_ref.tsc_sequence' in get_time_ref_counter() to properly handle the situation when we failed to write the updated TSC page values to the guest. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-03-18iommu/tegra-smmu: Make tegra_smmu_probe_device() to handle all IOMMU phandlesDmitry Osipenko1-4/+3
The tegra_smmu_probe_device() handles only the first IOMMU device-tree phandle, skipping the rest. Devices like 3D module on Tegra30 have multiple IOMMU phandles, one for each h/w block, and thus, only one IOMMU phandle is added to fwspec for the 3D module, breaking GPU. Previously this problem was masked by tegra_smmu_attach_dev() which didn't use the fwspec, but parsed the DT by itself. The previous commit to tegra-smmu driver partially reverted changes that caused problems for T124 and now we have tegra_smmu_attach_dev() that uses the fwspec and the old-buggy variant of tegra_smmu_probe_device() which skips secondary IOMMUs. Make tegra_smmu_probe_device() not to skip the secondary IOMMUs. This fixes a partially attached IOMMU of the 3D module on Tegra30 and now GPU works properly once again. Fixes: 765a9d1d02b2 ("iommu/tegra-smmu: Fix mc errors on tegra124-nyan") Signed-off-by: Dmitry Osipenko <[email protected]> Tested-by: Nicolin Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2021-03-18iommu/amd: Keep track of amd_iommu_irq_remap stateJoerg Roedel1-1/+4
The amd_iommu_irq_remap variable is set to true in amd_iommu_prepare(). But if initialization fails it is not set to false. Fix that and correctly keep track of whether irq remapping is enabled or not. References: https://bugzilla.kernel.org/show_bug.cgi?id=212133 References: https://bugzilla.suse.com/show_bug.cgi?id=1183132 Fixes: b34f10c2dc59 ("iommu/amd: Stop irq_remapping_select() matching when remapping is disabled") Cc: [email protected] # v5.11 Signed-off-by: Joerg Roedel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Huang Rui <[email protected]>
2021-03-18iommu/amd: Don't call early_amd_iommu_init() when AMD IOMMU is disabledJoerg Roedel1-4/+4
Don't even try to initialize the AMD IOMMU hardware when amd_iommu=off has been passed on the kernel command line. References: https://bugzilla.kernel.org/show_bug.cgi?id=212133 References: https://bugzilla.suse.com/show_bug.cgi?id=1183132 Cc: [email protected] # v5.11 Signed-off-by: Joerg Roedel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Huang Rui <[email protected]>
2021-03-18iommu/amd: Move Stoney Ridge check to detect_ivrs()Joerg Roedel1-11/+12
The AMD IOMMU will not be enabled on AMD Stoney Ridge systems. Bail out even earlier and refuse to even detect the IOMMU there. References: https://bugzilla.kernel.org/show_bug.cgi?id=212133 References: https://bugzilla.suse.com/show_bug.cgi?id=1183132 Cc: [email protected] # v5.11 Signed-off-by: Joerg Roedel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Huang Rui <[email protected]>
2021-03-18nvmet-tcp: fix kmap leak when data digest in useElad Grupi1-1/+1
When data digest is enabled we should unmap pdu iovec before handling the data digest pdu. Signed-off-by: Elad Grupi <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-03-18nvmet: don't check iosqes,iocqes for discovery controllersSagi Grimberg1-3/+14
From the base spec, Figure 78: "Controller Configuration, these fields are defined as parameters to configure an "I/O Controller (IOC)" and not to configure a "Discovery Controller (DC). ... If the controller does not support I/O queues, then this field shall be read-only with a value of 0h Just perform this check for I/O controllers. Fixes: a07b4970f464 ("nvmet: add a generic NVMe target") Reported-by: Belanger, Martin <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-03-18nvme-rdma: fix possible hang when failing to set io queuesSagi Grimberg1-2/+5
We only setup io queues for nvme controllers, and it makes absolutely no sense to allow a controller (re)connect without any I/O queues. If we happen to fail setting the queue count for any reason, we should not allow this to be a successful reconnect as I/O has no chance in going through. Instead just fail and schedule another reconnect. Reported-by: Chao Leng <[email protected]> Fixes: 711023071960 ("nvme-rdma: add a NVMe over Fabrics RDMA host driver") Signed-off-by: Sagi Grimberg <[email protected]> Reviewed-by: Chao Leng <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-03-18nvme-tcp: fix possible hang when failing to set io queuesSagi Grimberg1-2/+5
We only setup io queues for nvme controllers, and it makes absolutely no sense to allow a controller (re)connect without any I/O queues. If we happen to fail setting the queue count for any reason, we should not allow this to be a successful reconnect as I/O has no chance in going through. Instead just fail and schedule another reconnect. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-03-18nvme-tcp: fix misuse of __smp_processor_id with preemption enabledSagi Grimberg1-1/+1
For our pure advisory use-case, we only rely on this call as a hint, so fix the warning complaints of using the smp_processor_id variants with preemption enabled. Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") Fixes: ada831772188 ("nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT") Signed-off-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Tested-by: Yi Zhang <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-03-18nvme-tcp: fix a NULL deref when receiving a 0-length r2t PDUSagi Grimberg1-0/+7
When the controller sends us a 0-length r2t PDU we should not attempt to try to set up a h2cdata PDU but rather conclude that this is a buggy controller (forward progress is not possible) and simply fail it immediately. Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Reported-by: Belanger, Martin <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2021-03-18nvme: fix Write Zeroes limitationsChristoph Hellwig1-24/+12
We voluntarily limit the Write Zeroes sizes to the MDTS value provided by the hardware, but currently get the units wrong, so fix that. Fixes: 6e02318eaea5 ("nvme: add support for the Write Zeroes command") Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Keith Busch <[email protected]> Tested-by: Klaus Jensen <[email protected]> Reviewed-by: Klaus Jensen <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Himanshu Madhani <[email protected]>
2021-03-18nvme: allocate the keep alive request using BLK_MQ_REQ_NOWAITChristoph Hellwig1-2/+2
To avoid an error recovery deadlock where the keep alive work is waiting for a request and thus can't be flushed to make progress for tearing down the controller. Also print the error code returned from blk_mq_alloc_request to help debugging any future issues in this code. Based on an earlier patch from Hannes Reinecke <[email protected]>. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Daniel Wagner <[email protected]>
2021-03-18nvme: merge nvme_keep_alive into nvme_keep_alive_workChristoph Hellwig1-18/+8
Merge nvme_keep_alive into its only caller to prepare for additional changes to this code. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Daniel Wagner <[email protected]>
2021-03-18nvme-fabrics: only reserve a single tagChristoph Hellwig5-8/+15
Fabrics drivers currently reserve two tags on the admin queue. But given that the connect command is only run on a freshly created queue or after all commands have been force aborted we only need to reserve a single tag. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Daniel Wagner <[email protected]>
2021-03-18drm/amd/display: Remove MPC gamut remap logic for DCN30Dillon Varone1-32/+2
[Why?] Should only reroute gamut remap to mpc unless 3D LUT is not used and all planes are using the same src->dest. [How?] Remove DCN30 specific logic for rerouting gamut remap to mpc. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Reviewed-by: Krunoslav Kovac <[email protected]> Acked-by: Aric Cyr <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-03-18drm/amd/display: Correct algorithm for reversed gammaCalvin Hou1-8/+18
[Why] DCN30 needs to correctly program reversed gamma curve, which DCN20 already has. Also needs to fix a bug that 252-255 values are clipped. [How] Apply two fixes into DCN30. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Calvin Hou <[email protected]> Reviewed-by: Jun Lei <[email protected]> Reviewed-by: Krunoslav Kovac <[email protected]> Acked-by: Solomon Chiu <[email protected]> Acked-by: Vladimir Stempen <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-03-17module: remove never implemented MODULE_SUPPORTED_DEVICELeon Romanovsky175-480/+1
MODULE_SUPPORTED_DEVICE was added in pre-git era and never was implemented. We can safely remove it, because the kernel has grown to have many more reliable mechanisms to determine if device is supported or not. Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-03-17Merge tag 'mips-fixes_5.12_2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fix from Thomas Bogendoerfer: "Fix for fdt alignment when image is compressed" * tag 'mips-fixes_5.12_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: vmlinux.lds.S: Fix appended dtb not properly aligned
2021-03-17Merge tag 'thermal-v5.12-rc4' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal framework fix from Daniel Lezcano: "Fix NULL pointer access when the cooling device transition stats table failed to allocate due to a big number of states (Manaf Meethalavalappu Pallikunhi)" * tag 'thermal-v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: thermal/core: Add NULL pointer check before using cooling device stats
2021-03-17drm/omap: dsi: fix unsigned expression compared with zeroJunlin Yang1-3/+4
r is "u32" always >= 0,mipi_dsi_create_packet may return little than zero. so r < 0 condition is never accessible. Fixes coccicheck warnings: ./drivers/gpu/drm/omapdrm/dss/dsi.c:2155:5-6: WARNING: Unsigned expression compared with zero: r < 0 Signed-off-by: Junlin Yang <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-03-17i915/perf: Start hrtimer only if sampling the OA bufferUmesh Nerlige Ramappa1-8/+5
SAMPLE_OA parameter enables sampling of OA buffer and results in a call to init the OA buffer which initializes the OA unit head/tail pointers. The OA_EXPONENT parameter controls the periodicity of the OA reports in the OA buffer and results in starting a hrtimer. Before gen12, all use cases required the use of the OA buffer and i915 enforced this setting when vetting out the parameters passed. In these platforms the hrtimer was enabled if OA_EXPONENT was passed. This worked fine since it was implied that SAMPLE_OA is always passed. With gen12, this changed. Users can use perf without enabling the OA buffer as in OAR use cases. While an OAR use case should ideally not start the hrtimer, we see that passing an OA_EXPONENT parameter will start the hrtimer even though SAMPLE_OA is not specified. This results in an uninitialized OA buffer, so the head/tail pointers used to track the buffer are zero. This itself does not fail, but if we ran a use-case that SAMPLED the OA buffer previously, then the OA_TAIL register is still pointing to an old value. When the timer callback runs, it ends up calculating a wrong/large number of available reports. Since we do a spinlock_irq_save and start processing a large number of reports, NMI watchdog fires and causes a crash. Start the timer only if SAMPLE_OA is specified. v2: - Drop SAMPLE OA check when appending samples (Ashutosh) - Prevent read if OA buffer is not being sampled Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL") Signed-off-by: Umesh Nerlige Ramappa <[email protected]> Reviewed-by: Ashutosh Dixit <[email protected]> Signed-off-by: Lionel Landwerlin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit be0bdd67fda9468156c733976688f6487d0c42f7) Signed-off-by: Jani Nikula <[email protected]>
2021-03-17drm/i915: Workaround async flip + VT-d corruption on HSW/BDWVille Syrjälä2-2/+37
On HSW/BDW with VT-d active the first tile row scanned out after the first async flip of the frame often ends up corrupted. Whether the corruption happens or not depends on the scanline on which the async flip happens, but the behaviour seems very consistent. Ie. the same set of scanlines (which are most scanlines) always show the corruption. And another set of scanlines (far less of them) never shows the corruption. I discovered that disabling the fetch-stride stretching feature cures the corruption. This is some kind of TLB related prefetch thing AFAIK. We already disable it on SNB primary planes due to a documented workaround. The hardware folks indicated that disabling this should be fine, so let's go with that. And while we're here, let's document the relevant bits on all pre-skl platforms. Fixes: 2a636e240c77 ("drm/i915: Implement async flip for ivb/hsw") Fixes: cda195f13abd ("drm/i915: Implement async flips for bdw") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Karthik B S <[email protected]> (cherry picked from commit b7a7053ab2ec558b8ae4e55f62ea8f1f58e14f5c) Signed-off-by: Jani Nikula <[email protected]>
2021-03-17locking/ww_mutex: Fix acquire/release imbalance in ↵Waiman Long1-2/+3
ww_acquire_init()/ww_acquire_fini() In ww_acquire_init(), mutex_acquire() is gated by CONFIG_DEBUG_LOCK_ALLOC. The dep_map in the ww_acquire_ctx structure is also gated by the same config. However mutex_release() in ww_acquire_fini() is gated by CONFIG_DEBUG_MUTEXES. It is possible to set CONFIG_DEBUG_MUTEXES without setting CONFIG_DEBUG_LOCK_ALLOC though it is an unlikely configuration. That may cause a compilation error as dep_map isn't defined in this case. Fix this potential problem by enclosing mutex_release() inside CONFIG_DEBUG_LOCK_ALLOC. Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-17locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handlingWaiman Long1-11/+14
The use_ww_ctx flag is passed to mutex_optimistic_spin(), but the function doesn't use it. The frequent use of the (use_ww_ctx && ww_ctx) combination is repetitive. In fact, ww_ctx should not be used at all if !use_ww_ctx. Simplify ww_mutex code by dropping use_ww_ctx from mutex_optimistic_spin() an clear ww_ctx if !use_ww_ctx. In this way, we can replace (use_ww_ctx && ww_ctx) by just (ww_ctx). Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Davidlohr Bueso <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-17thermal/core: Add NULL pointer check before using cooling device statsManaf Meethalavalappu Pallikunhi1-0/+3
There is a possible chance that some cooling device stats buffer allocation fails due to very high cooling device max state value. Later cooling device update sysfs can try to access stats data for the same cooling device. It will lead to NULL pointer dereference issue. Add a NULL pointer check before accessing thermal cooling device stats data. It fixes the following bug [ 26.812833] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 [ 27.122960] Call trace: [ 27.122963] do_raw_spin_lock+0x18/0xe8 [ 27.122966] _raw_spin_lock+0x24/0x30 [ 27.128157] thermal_cooling_device_stats_update+0x24/0x98 [ 27.128162] cur_state_store+0x88/0xb8 [ 27.128166] dev_attr_store+0x40/0x58 [ 27.128169] sysfs_kf_write+0x50/0x68 [ 27.133358] kernfs_fop_write+0x12c/0x1c8 [ 27.133362] __vfs_write+0x54/0x160 [ 27.152297] vfs_write+0xcc/0x188 [ 27.157132] ksys_write+0x78/0x108 [ 27.162050] ksys_write+0xf8/0x108 [ 27.166968] __arm_smccc_hvc+0x158/0x4b0 [ 27.166973] __arm_smccc_hvc+0x9c/0x4b0 [ 27.186005] el0_svc+0x8/0xc Signed-off-by: Manaf Meethalavalappu Pallikunhi <[email protected]> Signed-off-by: Daniel Lezcano <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-17efivars: respect EFI_UNSUPPORTED return from firmwareShawn Guo1-0/+4
As per UEFI spec 2.8B section 8.2, EFI_UNSUPPORTED may be returned by EFI variable runtime services if no variable storage is supported by firmware. In this case, there is no point for kernel to continue efivars initialization. That said, efivar_init() should fail by returning an error code, so that efivarfs will not be mounted on /sys/firmware/efi/efivars at all. Otherwise, user space like efibootmgr will be confused by the EFIVARFS_MAGIC seen there, while EFI variable calls cannot be made successfully. Cc: <[email protected]> # v5.10+ Signed-off-by: Shawn Guo <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2021-03-17KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUsVitaly Kuznetsov3-0/+26
When KVM_REQ_MASTERCLOCK_UPDATE request is issued (e.g. after migration) we need to make sure no vCPU sees stale values in PV clock structures and thus all vCPUs are kicked with KVM_REQ_CLOCK_UPDATE. Hyper-V TSC page clocksource is global and kvm_guest_time_update() only updates in on vCPU0 but this is not entirely correct: nothing blocks some other vCPU from entering the guest before we finish the update on CPU0 and it can read stale values from the page. Invalidate TSC page in kvm_gen_update_masterclock() to switch all vCPUs to using MSR based clocksource (HV_X64_MSR_TIME_REF_COUNT). Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-03-17KVM: x86: hyper-v: Limit guest to writing zero to ↵Vitaly Kuznetsov1-0/+3
HV_X64_MSR_TSC_EMULATION_STATUS HV_X64_MSR_TSC_EMULATION_STATUS indicates whether TSC accesses are emulated after migration (to accommodate for a different host TSC frequency when TSC scaling is not supported; we don't implement this in KVM). Guest can use the same MSR to stop TSC access emulation by writing zero. Writing anything else is forbidden. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-03-16riscv: Correct SPARSEMEM configurationKefeng Wang1-2/+2
There are two issues for RV32, 1) if use FLATMEM, it is useless to enable SPARSEMEM_STATIC. 2) if use SPARSMEM, both SPARSEMEM_VMEMMAP and SPARSEMEM_STATIC is enabled. Fixes: d95f1a542c3d ("RISC-V: Implement sparsemem") Signed-off-by: Kefeng Wang <[email protected]> Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2021-03-16RISC-V: kasan: Declare kasan_shallow_populate() staticPalmer Dabbelt1-1/+1
Without this I get a missing prototype warning. Reported-by: kernel test robot <[email protected]> Fixes: e178d670f251 ("riscv/kasan: add KASAN_VMALLOC support") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2021-03-16riscv: Ensure page table writes are flushed when initializing KASAN vmallocAlexandre Ghiti1-0/+2
Make sure that writes to kernel page table during KASAN vmalloc initialization are made visible by adding a sfence.vma. Signed-off-by: Alexandre Ghiti <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Fixes: e178d670f251 ("riscv/kasan: add KASAN_VMALLOC support") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2021-03-16RISC-V: Fix out-of-bounds accesses in init_resources()Geert Uytterhoeven1-1/+2
init_resources() allocates an array of resources, based on the current total number of memory regions and reserved memory regions. However, allocating this array using memblock_alloc() might increase the number of reserved memory regions. If that happens, populating the array later based on the new number of regions will cause out-of-bounds writes beyond the end of the allocated array. Fix this by allocating one more entry, which may or may not be used. Fixes: 797f0375dd2ef5cd ("RISC-V: Do not allocate memblock while iterating reserved memblocks") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Atish Patra <[email protected]> Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2021-03-16riscv: Fix compilation error with Canaan SoCDamien Le Moal1-0/+2
When CONFIG_SOC_CANAAN is selected, the K210 sysctl driver is always compiled. Since this driver early init function calls the function k210_clk_early_init() implemented by the K210 clk driver, this driver must also always be selected for compilation ot avoid build failures. Avoid such build failures by always selecting CONFIG_COMMON_CLK and CONFIG_COMMON_CLK_K210 when CONFIG_SOC_CANAAN is enabled. Reported-by: kernel test robot <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Fixes: c6ca7616f7d5 ("clk: Add RISC-V Canaan Kendryte K210 clock driver") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2021-03-16ftrace: Fix spelling mistake "disabed" -> "disabled"Colin Ian King3-3/+3
There is a spelling mistake in a comment, fix it. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2021-03-16riscv: fix bugon.cocci warningskernel test robot1-2/+1
Use BUG_ON instead of a if condition followed by BUG. Generated by: scripts/coccinelle/misc/bugon.cocci Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported") CC: Guo Ren <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: kernel test robot <[email protected]> Signed-off-by: Julia Lawall <[email protected]> Reviewed-by: Pekka Enberg <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2021-03-16scsi: mpt3sas: Do not use GFP_KERNEL in atomic contextChristophe JAILLET1-1/+1
mpt3sas_get_port_by_id() can be called when a spinlock is held. Use GFP_ATOMIC instead of GFP_KERNEL when allocating memory. Issue spotted by call_kern.cocci: ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7125 inside lock on line 7123 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6842 inside lock on line 6839 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 6854 inside lock on line 6851 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 7706 inside lock on line 7702 but uses GFP_KERNEL ./drivers/scsi/mpt3sas/mpt3sas_scsih.c:416:42-52: ERROR: function mpt3sas_get_port_by_id called on line 10260 inside lock on line 10256 but uses GFP_KERNEL Link: https://lore.kernel.org/r/[email protected] Fixes: 324c122fc0a4 ("scsi: mpt3sas: Add module parameter multipath_on_hba") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-03-17PCI: rpadlpar: Fix potential drc_name corruption in store functionsTyrel Datwyler1-8/+6
Both add_slot_store() and remove_slot_store() try to fix up the drc_name copied from the store buffer by placing a NUL terminator at nbyte + 1 or in place of a '\n' if present. However, the static buffer that we copy the drc_name data into is not zeroed and can contain anything past the n-th byte. This is problematic if a '\n' byte appears in that buffer after nbytes and the string copied into the store buffer was not NUL terminated to start with as the strchr() search for a '\n' byte will mark this incorrectly as the end of the drc_name string resulting in a drc_name string that contains garbage data after the n-th byte. Additionally it will cause us to overwrite that '\n' byte on the stack with NUL, potentially corrupting data on the stack. The following debugging shows an example of the drmgr utility writing "PHB 4543" to the add_slot sysfs attribute, but add_slot_store() logging a corrupted string value. drmgr: drmgr: -c phb -a -s PHB 4543 -d 1 add_slot_store: drc_name = PHB 4543°|<82>!, rc = -19 Fix this by using strscpy() instead of memcpy() to ensure the string is NUL terminated when copied into the static drc_name buffer. Further, since the string is now NUL terminated the code only needs to change '\n' to '\0' when present. Cc: [email protected] Signed-off-by: Tyrel Datwyler <[email protected]> [mpe: Reformat change log and add mention of possible stack corruption] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-03-16scsi: ufs: ufs-mediatek: Correct operator & -> &&dongjian1-1/+1
The "lpm" and "->enabled" are all boolean. We should be using && rather than the bit operator. Link: https://lore.kernel.org/r/[email protected] Fixes: 488edafb1120 ("scsi: ufs-mediatek: Introduce low-power mode for device power supply") Reviewed-by: Avri Altman <[email protected]> Signed-off-by: dongjian <[email protected]> Signed-off-by: Yue Hu <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-03-16scsi: sd_zbc: Update write pointer offset cacheJohannes Thumshirn1-8/+11
Recent changes changed the completion of SCSI commands from Soft-IRQ context to IRQ context. This triggers the following warning, when we're completing writes to zoned block devices that go through the zone append emulation: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc2+ #2 Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0 12/17/2015 RIP: 0010:__local_bh_disable_ip+0x3f/0x50 RSP: 0018:ffff8883e1409ba8 EFLAGS: 00010006 RAX: 0000000080010001 RBX: 0000000000000001 RCX: 0000000000000013 RDX: ffff888129e4d200 RSI: 0000000000000201 RDI: ffffffff915b9dbd RBP: ffff888113e9a540 R08: ffff888113e9a540 R09: 00000000000077f0 R10: 0000000000080000 R11: 0000000000000001 R12: ffff888129e4d200 R13: 0000000000001000 R14: 00000000000077f0 R15: ffff888129e4d218 FS: 0000000000000000(0000) GS:ffff8883e1400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2f8418ebc0 CR3: 000000021202a006 CR4: 00000000001706f0 Call Trace: <IRQ> _raw_spin_lock_bh+0x18/0x40 sd_zbc_complete+0x43d/0x1150 sd_done+0x631/0x1040 ? mark_lock+0xe4/0x2fd0 ? provisioning_mode_store+0x3f0/0x3f0 scsi_finish_command+0x31b/0x5c0 _scsih_io_done+0x960/0x29e0 [mpt3sas] ? mpt3sas_scsih_scsi_lookup_get+0x1c7/0x340 [mpt3sas] ? __lock_acquire+0x166b/0x58b0 ? _get_st_from_smid+0x4a/0x80 [mpt3sas] _base_process_reply_queue+0x23f/0x26e0 [mpt3sas] ? lock_is_held_type+0x98/0x110 ? find_held_lock+0x2c/0x110 ? mpt3sas_base_sync_reply_irqs+0x360/0x360 [mpt3sas] _base_interrupt+0x8d/0xd0 [mpt3sas] ? rcu_read_lock_sched_held+0x3f/0x70 __handle_irq_event_percpu+0x24d/0x600 handle_irq_event+0xef/0x240 ? handle_irq_event_percpu+0x110/0x110 handle_edge_irq+0x1f6/0xb60 __common_interrupt+0x75/0x160 common_interrupt+0x7b/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 Don't use spin_lock_bh() to protect the update of the write pointer offset cache, but use spin_lock_irqsave() for it. Link: https://lore.kernel.org/r/3cfebe48d09db73041b7849be71ffbcec7ee40b3.1615369586.git.johannes.thumshirn@wdc.com Fixes: 664f0dce2058 ("scsi: mpt3sas: Add support for shared host tagset for CPU hotplug") Reported-by: Shinichiro Kawasaki <[email protected]> Tested-by: Shin'ichiro Kawasaki <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-03-17zonefs: fix to update .i_wr_refcnt correctly in zonefs_open_zone()Chao Yu1-4/+3
In zonefs_open_zone(), if opened zone count is larger than .s_max_open_zones threshold, we missed to recover .i_wr_refcnt, fix this. Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close") Cc: <[email protected]> Signed-off-by: Chao Yu <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.