| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
AMD systems with uPEP HID AMDI007 should be using revision 2 and
the AMD method.
Fixes: 8fbd6c15ea0a ("ACPI: PM: Adjust behavior for field problems on AMD systems")
Signed-off-by: Mario Limonciello <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Commit 5a9d38b20a5a ("drm/i915/display: hide workaround for broken vbt
in intel_bios.c") moved the workaround for broken or missing VBT to
intel_bios.c. However is_port_valid() only protects the handling of
different skus of the same display version. Since in
intel_setup_outputs() we share the code path with version 9, this would
also create port F for SKL/KBL, which does not exist.
Missing VBT can be reproduced when starting a headless QEMU with no
opregion available.
Avoid the issue by splitting versions 9 and 10 in intel_setup_outputs(),
which also makes it more clear what code path it's taking for each
version.
v2: move generic display version after Geminilake since that one has
a different set of outputs
Fixes: 5a9d38b20a5a ("drm/i915/display: hide workaround for broken vbt in intel_bios.c")
Cc: Jani Nikula <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Reported-by: Christoph Hellwig <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Tested-by: Christoph Hellwig <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit ec387b8ff8d757561369be9a280cf63f23bbb926)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
We were using GRAPHICS_VER() to handle SKL_DFSM register, which means we
were not handling GLK correctly since that has GRAPHICS_VER == 9, but
DISPLAY_VER == 10. Switch the entire branch to check DISPLAY_VER
which makes it more in line with Bspec.
Even though the Bspec has an exception for RKL in
TGL_DFSM_PIPE_D_DISABLE, we don't have to do anything as the bit has
disable semantic and RKL doesn't have pipe D.
Bspec: 50075, 7548
Fixes: 2b5a4562edd0 ("drm/i915/display: Simplify GLK display version tests")
Cc: Matt Roper <[email protected]>
Signed-off-by: Lucas De Marchi <[email protected]>
Reviewed-by: Matt Roper <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4fd177288a4ee046bd8590355a64de855dcf77e2)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
PORT_A to PORT_F are regular integers defined in the enum port,
while for_each_port_masked requires a bit mask for the ports.
Current given mask: 0b111
Desired mask: 0b111111
I noticed this while Christoph was reporting a bug found on headless
GVT configuration which bisect blamed commit 3ae04c0c7e63 ("drm/i915/bios:
limit default outputs to ports A through F")
v2: Avoid unnecessary line continuations as pointed by CI and Christoph
Cc: Christoph Hellwig <[email protected]>
Fixes: 3ae04c0c7e63 ("drm/i915/bios: limit default outputs to ports A through F")
Cc: Lucas De Marchi <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Jani Nikula <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Reviewed-by: José Roberto de Souza <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Tested-by: Christoph Hellwig <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 9b52aa720168859526bf90d77fa210fc0336f170)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Fix some spelling mistakes in comments:
delarations ==> declarations
softare ==> software
suffiently ==> sufficiently
requred ==> required
unaliged ==> unaligned
Signed-off-by: gushengxian <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
'struct pcb_struct * pcb_va' should be 'struct pcb_struct *pcb_va'.
Signed-off-by: gushengxian <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
This is one of the last modules using the old calling conventions
for module init/exit functions. Change it over to the style used
everywhere else.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
audit now requires syscall_get_return_value instead of regs_return_value
to retrieve syscall return code . Other architectures that support audit
have already define this function.
Signed-off-by: He Zhe <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
We have a fairly specific alpha binary loader in Linux: running x86
(i386, i486) binaries via the em86 [1] emulator. As noted in the Kconfig
option, the same behavior can be achieved via binfmt_misc, for example,
more nowadays used for running qemu-user.
An example on how to get binfmt_misc running with em86 can be found in
Documentation/admin-guide/binfmt-misc.rst
The defconfig does not have CONFIG_BINFMT_EM86=y set. And doing a
make defconfig && make olddefconfig
results in
# CONFIG_BINFMT_EM86 is not set
... as we don't seem to have any supported Linux distirbution for alpha
anymore, there isn't really any "default" user of that feature anymore.
Searching for "CONFIG_BINFMT_EM86=y" reveals mostly discussions from
around 20 years ago, like [2] describing how to get netscape via em86
running via em86, or [3] discussing that running wine or installing
Win 3.11 through em86 would be a nice feature.
The latest binaries available for em86 are from 2000, version 2.2.1 [4] --
which translates to "unsupported"; further, em86 doesn't even work with
glibc-2.x but only with glibc-2.0 [4, 5]. These are clear signs that
there might not be too many em86 users out there, especially users
relying on modern Linux kernels.
Even though the code footprint is relatively small, let's just get rid
of this blast from the past that's effectively unused.
[1] http://ftp.dreamtime.org/pub/linux/Linux-Alpha/em86/v0.4/docs/em86.html
[2] https://static.lwn.net/1998/1119/a/alpha-netscape.html
[3] https://groups.google.com/g/linux.debian.alpha/c/AkGuQHeCe0Y
[4] http://zeniv.linux.org.uk/pub/linux/alpha/em86/v2.2-1/relnotes.2.2.1.html
[5] https://forum.teamspeak.com/archive/index.php/t-1477.html
Cc: Alexander Viro <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
"kerne" -> "kernel"
Signed-off-by: tangchunyou <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
Gentoo's KernelCI will soon boot test alpha kernel and we need
CONFIG_DEVTMPFS=y to be set for that.
Note that CONFIG_DEVTMPFS=y is already necessary for lot of other
distribution/tools like recent udev/systemd.
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
This issue was noticed while debugging a shutdown issue where some
secondary CPUs are not being shutdown correctly. A fix for that [1] requires
that secondary cpus be offlined using the cpu_online_mask so that the
stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in
[1] looked at the architectures and found that alpha is one of two
architectures that executes smp_send_stop() on all possible CPUs.
On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs
to send them to online CPUs.
Send the stop IPI to only the online CPUs.
[1] https://lkml.org/lkml/2020/1/10/250
Signed-off-by: Prarit Bhargava <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
Replace a comma between expression statements by a semicolon.
Fixes: cba1ec7e88a0 ("alpha: switch to generic kernel_thread()")
Signed-off-by: Zheng Yongjun <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
since 889b3c1245de48ed0cacf7aebb25c489d3e4a3e9, CONFIG_OPTIMIZE_INLINING
is removed entirely and inline is always defined to `inline __gnu_inline
__inline_maybe_unused notrace` in compiler_types.h
Besides, undef inline here also means it never use
__attribute__((__gnu_inline__)), so `extern inline` function can never
be defined header files, otherwise multiple definition errors will
happen, e.g. if multiple translation units use alpha/include/asm/pal.h
will report multiple definitions, because there are many extern inline
function definitions in this header.
``` c
extern inline TYPE NAME(void) \
{ \
register TYPE __r0 __asm__("$0"); \
__asm__ __volatile__( \
...
```
Ofc, it is also ok to remove `extern` in `extern inline` here, then all
of iso c99 and gnuc99/89 are ok, but there are also other alpha headers
have such function definitions.
Signed-off-by: chenli <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
When building an alpha kernel with mpi set as module, I hit this build
error:
ERROR: "__udiv_qrnnd" [lib/mpi/mpi.ko] undefined!
make[2]: *** [scripts/Makefile.modpost:92: __modpost] Error 1
make[1]: *** [Makefile:1266: modules] Error 2
This is due to __udiv_qrnnd not exported.
Signed-off-by: Corentin Labbe <[email protected]>
Signed-off-by: Matt Turner <[email protected]>
|
|
DEFINE_CLK() makes the variable name be clk_xyz, so variable
'pll' should instead be 'clk_pll'.
In file included from ../arch/m68k/coldfire/m525x.c:12:
../arch/m68k/coldfire/m525x.c:29:30: error: 'pll' undeclared here (not in a function)
29 | CLKDEV_INIT(NULL, "pll.0", &pll),
| ^~~
../include/linux/clkdev.h:30:10: note: in definition of macro 'CLKDEV_INIT'
30 | .clk = c, \
| ^
In file included from ../arch/m68k/coldfire/m525x.c:21:
../arch/m68k/include/asm/mcfclk.h:43:27: warning: 'clk_pll' defined but not used [-Wunused-variable]
43 | static struct clk clk_##clk_ref = { \
| ^~~~
../arch/m68k/coldfire/m525x.c:25:1: note: in expansion of macro 'DEFINE_CLK'
25 | DEFINE_CLK(pll, "pll.0", MCF_CLK);
| ^~~~~~~~~~
Fixes: 63aadb77669a ("m68k: coldfire: use clkdev_lookup on most coldfire")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Greg Ungerer <[email protected]>
|
|
|
|
Xin Long says:
====================
sctp: improve the pmtu probe in Search Complete state
Timo recently suggested to use the loss of (data) packets as
indication to send pmtu probe for Search Complete state, which
should also be implied by RFC8899. This patchset is to change
the current one that is doing probe with current pmtu all the
time.
v1->v2:
- see Patch 2/2.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch is to introduce last_rtx_chunks into sctp_transport to detect
if there's any packet retransmission/loss happened by checking against
asoc's rtx_data_chunks in sctp_transport_pl_send().
If there is, namely, transport->last_rtx_chunks != asoc->rtx_data_chunks,
the pmtu probe will be sent out. Otherwise, increment the pl.raise_count
and return when it's in Search Complete state.
With this patch, if in Search Complete state, which is a long period, it
doesn't need to keep probing the current pmtu unless there's data packet
loss. This will save quite some traffic.
v1->v2:
- add the missing Fixes tag.
Fixes: 0dac127c0557 ("sctp: do black hole detection in search complete state")
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch does 3 things:
- make sctp_transport_pl_send() and sctp_transport_pl_recv()
return bool type to decide if more probe is needed to send.
- pr_debug() only when probe is really needed to send.
- count pl.raise_count in sctp_transport_pl_send() instead of
sctp_transport_pl_recv(), and it's only incremented for the
1st probe for the same size.
These are preparations for the next patch to make probes happen
only when there's packet loss in Search Complete state.
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The list_for_each_entry() iterator, "vlan" in this code, can never be
NULL so the warning will never be printed.
Signed-off-by: Harshvardhan Jha <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ytc700tlag_05_201c panel support 8 bpc not 6 bpc as per
recent testing in i.MX8MM platform.
Fix it.
Fixes: 7a1f4fa4a629 ("drm/panel: simple: Add YTC700TLAG-05-201C")
Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Sam Ravnborg <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
gcc doesn't care, but clang quite reasonably pointed out that the recent
commit e9ba16e68cce ("smpboot: Mark idle_init() as __always_inlined to
work around aggressive compiler un-inlining") did some really odd
things:
kernel/smpboot.c:50:20: warning: duplicate 'inline' declaration specifier [-Wduplicate-decl-specifier]
static inline void __always_inline idle_init(unsigned int cpu)
^
which not only has that duplicate inlining specifier, but the new
__always_inline was put in the wrong place of the function definition.
We put the storage class specifiers (ie things like "static" and
"extern") first, and the type information after that. And while the
compiler may not care, we put the inline specifier before the types.
So it should be just
static __always_inline void idle_init(unsigned int cpu)
instead.
Cc: Ingo Molnar <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix guest to host memory corruption in H_RTAS due to missing nargs
check.
- Fix guest triggerable host crashes due to bad handling of nested
guest TM state.
- Fix possible crashes due to incorrect reference counting in
kvm_arch_vcpu_ioctl().
- Two commits fixing some regressions in KVM transactional memory
handling introduced by the recent rework of the KVM code.
Thanks to Nicholas Piggin, Alexey Kardashevskiy, and Michael Neuling.
* tag 'powerpc-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak
KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash
KVM: PPC: Book3S HV P9: Fix guest TM support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of timer related fixes:
- Plug a race between rearm and process tick in the posix CPU timers
code
- Make the optimization to avoid recalculation of the next timer
interrupt work correctly when there are no timers pending"
* tag 'timers-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix get_next_timer_interrupt() with no timers pending
posix-cpu-timers: Fix rearm racing against process tick
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 jump label fix from Thomas Gleixner:
"A single fix for jump labels to prevent the compiler from agressive
un-inlining which results in a section mismatch"
* tag 'locking-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_labels: Mark __jump_label_transform() as __always_inlined to work around aggressive compiler un-inlining
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Thomas Gleixner:
"A set of EFI fixes:
- Prevent memblock and I/O reserved resources to get out of sync when
EFI memreserve is in use.
- Don't claim a non-existing table is invalid
- Don't warn when firmware memory is already reserved correctly"
* tag 'efi-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/mokvar: Reserve the table only if it is in boot services data
efi/libstub: Fix the efi_load_initrd function description
firmware/efi: Tell memblock about EFI iomem reservations
efi/tpm: Differentiate missing and invalid final event log table.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fix from Thomas Gleixner:
"A single update for the boot code to prevent aggressive un-inlining
which causes a section mismatch"
* tag 'core-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smpboot: Mark idle_init() as __always_inlined to work around aggressive compiler un-inlining
|
|
Pull dma-mapping fix from Christoph Hellwig:
- handle vmalloc addresses in dma_common_{mmap,get_sgtable} (Roman
Skakun)
* tag 'dma-mapping-5.14-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: handle vmalloc addresses in dma_common_{mmap,get_sgtable}
|
|
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'err'.
Eliminate the follow smatch warning:
drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn:
missing error code 'err'.
Reported-by: Abaci Robot <[email protected]>
Fixes: 7ae0e400cd93 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs")
Signed-off-by: Jiapeng Chong <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
BCM54811 PHY
Restore PHY_ID_BCM54811 accidently removed by commit 5d4358ede8eb.
Fixes: 5d4358ede8eb ("net: phy: broadcom: Allow BCM54210E to configure APD")
Signed-off-by: Kevin Lo <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Merge commit cited in fixes tag was incorrect. Due to it phys_port_name
of the virtual port resulted in incorrect name.
Also the phys_port_name of the physical port was written twice due to
the merge error.
Fix it by removing the old code and inserting back the misplaced code.
Related commits of interest in net and net-next branches that resulted
in merge conflict are:
in net-next branch:
commit f285f37cb1e6 ("devlink: append split port number to the port name")
in net branch:
commit b28d8f0c25a9 ("devlink: Correct VIRTUAL port to not have phys_port attributes")
Fixes: 126285651b7 ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Parav Pandit <[email protected]>
Reported-by: Niklas Schnelle <[email protected]>
Tested-by: Niklas Schnelle <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Avoid configure backpressure for LBK links as they
don't support it and enable lmacs before configuration
pause frames.
Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool")
Signed-off-by: Geetha sowjanya <[email protected]>
Signed-off-by: Hariprasad Kelam <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In the existing code while changing the number of TX/RX
queues using ethtool the PF/VF interface resources are
freed and reallocated (otx2_stop and otx2_open is called)
if the device is in running state. If any resource allocation
fails in otx2_open, driver free already allocated resources
and return. But again, when the number of queues changes
as the device state still running oxt2_stop is called.
In which we try to free already freed resources leading
to driver crash.
This patch fixes the issue by setting the INTF_DOWN flag on
error and free the resources in otx2_stop only if the flag is
not set.
Fixes: 50fe6c02e5ad ("octeontx2-pf: Register and handle link notifications")
Signed-off-by: Geetha sowjanya <[email protected]>
Signed-off-by: Sunil Kovvuri Goutham <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently PKINDs are not assigned to LBK channels.
The default value of LBK_CHX_PKIND (channel to PKIND mapping) register
is zero, which is resulting in a overlap of pkind between LBK and CGX
LMACs. When KPU1 parser config is modified when PTP timestamping is
enabled on the CGX LMAC interface it is impacting traffic on LBK
interfaces as well.
This patch fixes the issue by reserving the PKIND#0 for LBK devices.
CGX mapped PF pkind starts from 1 and also fixes the max pkind available.
Fixes: 421572175ba5 ("octeontx2-af: Support to enable/disable HW timestamping")
Signed-off-by: Geetha sowjanya <[email protected]>
Signed-off-by: Sunil Kovvuri Goutham <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes, including a DFS failover fix, two fallocate
fixes, and two trivial coverity cleanups"
* tag '5.14-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix fallocate when trying to allocate a hole.
CIFS: Clarify SMB1 code for POSIX delete file
CIFS: Clarify SMB1 code for POSIX Create
cifs: support share failover when remounting
cifs: only write 64kb at a time when fallocating a small region of a file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- properly set the memory size, which fixes 32-bit systems
- allow initrd to load anywhere in memory, rather that restricting it
to the first 256MiB
- fix the 'mem=' parameter on 64-bit systems to properly account for
the maximum supported memory now that the kernel is outside the
linear map
- avoid installing mappings into the last 4KiB of memory, which
conflicts with error values
- avoid the stack from being freed while it is being walked
- a handful of fixes to the new copy to/from user routines
* tag 'riscv-for-linus-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: __asm_copy_to-from_user: Fix: Typos in comments
riscv: __asm_copy_to-from_user: Remove unnecessary size check
riscv: __asm_copy_to-from_user: Fix: fail on RV32
riscv: __asm_copy_to-from_user: Fix: overrun copy
riscv: stacktrace: pin the task's stack in get_wchan
riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE
riscv: Make sure the linear mapping does not use the kernel mapping
riscv: Fix memory_limit for 64-bit kernel
RISC-V: load initrd wherever it fits into memory
riscv: Fix 32-bit RISC-V boot failure
|
|
Commit 71f642833284 ("ACPI: utils: Fix reference counting in
for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer
that was possibly NULL. That fails miserably, because that helper
inline function is not set up to handle that case.
Just make acpi_dev_put() silently accept a NULL pointer, rather than
calling down to put_device() with an invalid offset off that NULL
pointer.
Link: https://lore.kernel.org/lkml/[email protected]/
Reported-and-tested-by: Jens Axboe <[email protected]>
Tested-by: Daniel Scally <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers, all of which can lead to user visible
problems in certain situations"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Fix NULL dereference on XCOPY completion
scsi: mpt3sas: Transition IOC to Ready state during shutdown
scsi: target: Fix protect handling in WRITE SAME(32)
scsi: iscsi: Fix iface sysfs attr detection
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a memory leak due to a race condition in io_init_wq_offload
(Yang)
- Poll error handling fixes (Pavel)
- Fix early fdput() regression (me)
- Don't reissue iopoll requests off release path (me)
- Add a safety check for io-wq queue off wrong path (me)
* tag 'io_uring-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
io_uring: explicitly catch any illegal async queue attempt
io_uring: never attempt iopoll reissue from release path
io_uring: fix early fdput() of file
io_uring: fix memleak in io_init_wq_offload()
io_uring: remove double poll entry on arm failure
io_uring: explicitly count entries for poll reqs
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- tracing fix (Keith Busch)
- fix multipath head refcounting (Hannes Reinecke)
- Write Zeroes vs PI fix (me)
- drop a bogus WARN_ON (Zhihao Cheng)
- Increase max blk-cgroup policy size, now that mq-deadline
uses it too (Oleksandr)
* tag 'block-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
nvme: set the PRACT bit when using Write Zeroes with T10 PI
nvme: fix nvme_setup_command metadata trace event
nvme: fix refcounting imbalance when all paths are down
nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
block: increase BLKCG_MAX_POLS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Poll for MCF
misc: eeprom: at24: Always append device id even if label property is set.
|
|
Merge misc mm fixes from Andrew Morton:
"15 patches.
VM subsystems affected by this patch series: userfaultfd, kfence,
highmem, pagealloc, memblock, pagecache, secretmem, pagemap, and
hugetlbfs"
* akpm:
hugetlbfs: fix mount mode command line processing
mm: fix the deadlock in finish_fault()
mm: mmap_lock: fix disabling preemption directly
mm/secretmem: wire up ->set_page_dirty
writeback, cgroup: do not reparent dax inodes
writeback, cgroup: remove wb from offline list before releasing refcnt
memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions
mm: page_alloc: fix page_poison=1 / INIT_ON_ALLOC_DEFAULT_ON interaction
mm: use kmap_local_page in memzero_page
mm: call flush_dcache_page() in memcpy_to_page() and memzero_page()
kfence: skip all GFP_ZONEMASK allocations
kfence: move the size check to the beginning of __kfence_alloc()
kfence: defer kfence_test_init to ensure that kunit debugfs is created
selftest: use mmap instead of posix_memalign to allocate memory
userfaultfd: do not untag user pointers
|
|
We use the timecounter APIs for the 48-bit PHC and packet timestamps.
We must periodically update the timecounter at roughly half the
overflow interval. The overflow interval is about 78 hours, so
update it every 19 hours (1/4 interval) for some extra margins.
Fixes: 390862f45c85 ("bnxt_en: Get the full 48-bit hardware timestamp periodically")
Reviewed-by: Pavan Chebbi <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
One skb's skb_shinfo frags are not writable, and they can be shared with
other skbs' like by pskb_copy(). To write the frags may cause other skb's
data crash.
So before doing en/decryption, skb_cow_data() should always be called for
a cloned or nonlinear skb if req dst is using the same sg as req src.
While at it, the likely branch can be removed, as it will be covered
by skb_cow_data().
Note that esp_input() has the same issue, and I will fix it in another
patch. tipc_aead_encrypt() doesn't have this issue, as it only processes
linear data in the unlikely branch.
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Shuang Li <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
linux-can-fixes-for-5.14-20210724
Marc Kleine-Budde says:
====================
pull-request: can 2021-07-24
this is a pull request of 6 patches for net/master.
The first patch is by Joakim Zhang targets the imx8mp device tree. It
removes the imx6 fallback from the flexcan binding, as the imx6 is not
compatible with the imx8mp.
Ziyang Xuan contributes a patch to fix a use-after-free in the CAN
raw's raw_setsockopt().
The next two patches target the CAN J1939 protocol. The first one is
by Oleksij Rempel and clarifies the lifetime of session object in
j1939_session_deactivate(). Zhang Changzhong's patch fixes the timeout
value between consecutive TP.DT.
Stephane Grosjean contributes a patch for the peak_usb driver to fix
reading of the rxerr/txerr values.
The last patch is by me for the mcp251xfd driver. It stops the
timestamp worker in case of a fatal error in the IRQ handler.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
In case an error occurred in the IRQ handler, the chip status is
dumped via devcoredump and all IRQs are disabled, but the chip stays
powered for further analysis.
The chip is in an undefined state and will not receive any CAN frames,
so shut down the timestamping worker, which reads the TBC register
regularly, too. This avoids any CRC read error messages if there is a
communication problem with the chip.
Fixes: efd8d98dfb90 ("can: mcp251xfd: add HW timestamp infrastructure")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
This patch fixes an incorrect way of reading error counters in messages
received for this purpose from the PCAN-USB interface. These messages
inform about the increase or decrease of the error counters, whose values
are placed in bytes 1 and 2 of the message data (not 0 and 1).
Fixes: ea8b33bde76c ("can: pcan_usb: add support of rxerr/txerr counters")
Link: https://lore.kernel.org/r/[email protected]
Cc: linux-stable <[email protected]>
Signed-off-by: Stephane Grosjean <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
TP.DT to 750ms
For receive side, the max time interval between two consecutive TP.DT
should be 750ms.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/r/[email protected]
Cc: linux-stable <[email protected]>
Signed-off-by: Zhang Changzhong <[email protected]>
Acked-by: Oleksij Rempel <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|