aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-04-28Merge tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi ↵Olof Johansson6-4/+277
into arm/dt ARM64: DT: Hisilicon SoCs DT updates for 5.2 * Hi3660 SoC and related boards: - Added DMA support for the uart nodes - Added the asp DMA controller node - Replaced dma-min-chan with dma-channel-mask to follow the binding * Hi3670 SoC and related boards: - Reused Hi3660 reset to support Hi3670, updated the binding document and added dts node - Reused Hi3660 MMC controller to support Hi3670, updated the binding document and added related nodes to support SD and WiFi for the SoC and hikey970 board - Added UFS controller node * tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi: arm64: dts: hisilicon: hi3670: Add UFS controller support arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask arm64: dts: hi3660: Add hisi asp dma device arm64: dts: hi3660: Add dma to uart nodes arm64: dts: hisilicon: hikey970: Add SD and WiFi support arm64: dts: hisilicon: hi3670: Add MMC controller support dt-bindings: mmc: Add HI3670 MMC controller binding arm64: dts: hisilicon: hi3670: Add reset controller support dt-bindings: reset: Add HI3670 reset controller binding Signed-off-by: Olof Johansson <[email protected]>
2019-04-28Merge tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx into ↵Olof Johansson9-61/+88
arm/dt arm64: dts: zynqmp: DT changes for v5.2 - Align xlnx-zynqmp-clk.h file name and separate binding for clock driver - Add TI quirks to zynqmp boards * tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx: arm64: zynqmp: dt: Add TI PHY quirk dt-bindings: xilinx: Separate clock binding from firmware doc include: dt-binding: clock: Rename zynqmp header file Signed-off-by: Olof Johansson <[email protected]>
2019-04-28Merge tag 'samsung-dt64-5.2' of ↵Olof Johansson3-12/+34
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.2 1. Use proper clock rates for GSCALER module on TM2 boards. 2. Add clocks for local paths on DECON and GSCALER modules of Exynos5433. 3. Add Slim SecuritySubSystem to Exynos5433. * tag 'samsung-dt64-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add SlimSSS to Exynos5433 arm64: dts: exynos: add DSD/GSD clocks to DECONs and GSCALERs of Exynos5433 arm64: dts: exynos: configure GSCALER related clocks on TM2 Signed-off-by: Olof Johansson <[email protected]>
2019-04-28Merge tag 'samsung-dt-5.2' of ↵Olof Johansson18-35/+477
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.2 1. Use proper ADC on Exynos4412. 2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps, unused regulators, ADC and UHS-I SD card support. Beside that adjust regulators to proper level and add always-on when needed. 3. Extend the Exynos5260: high speed I2C and proper external interrupts. Also fix shared external interrupt line and use better PLL for MMC clocks. 4. Fix audio recording (broken around v5.1) and microphone recording (since v4.14) on Exynos5422 Odroid XU3 boards. 5. Minor cleanups (stdout-path and bootargs). * tag 'samsung-dt-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Remove console argument from bootargs ARM: dts: exynos: Use stdout-path property instead of console in bootargs ARM: dts: exynos: Fix spelling mistake of EXYNOS5420 ARM: dts: exynos: Fix audio (microphone) routing on Odroid XU3 ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa ARM: dts: exynos: Extend the eMMC node on Arndale Octa ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa ARM: dts: exynos: Adjust ldo23 and ldo27 to lower levels on Arndale Octa ARM: dts: exynos: Fix audio routing on Odroid XU3 ARM: dts: exynos: Enable ADC on Arndale Octa ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260 ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260 ARM: dts: exynos: Add high speed I2C ports for Exynos5260 ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260 ARM: dts: exynos: Order nodes alphabetically in Arndale Octa ARM: dts: exynos: Add CPU cooling on Arndale Octa ARM: dts: exynos: Add unused PMIC regulators on Arndale Octa board ARM: dts: exynos: Use stdout path property on Arndale Octa board ARM: dts: exynos: Document regulator used by ADC on Odroid U3 ARM: dts: exynos: Use ADC for Exynos4x12 on Exynos4412 Signed-off-by: Olof Johansson <[email protected]>
2019-04-28Merge tag 'stm32-dt-for-v5.2-1' of ↵Olof Johansson12-6/+964
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.2, round 1 Highlights: ---------- MPU part: - Add initial support of stm32mp157a-dk1 board: This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add initial support of stm32mp157c-dk2 board: This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections than stm32mp157a-dk1 board are available. Display panel (otm8009a) and Murata wifi/BT combo is added. - Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and on stm32mp157a-dk1/dk2 boards. - Add sysconfig clock support on stm32mp157c. - Add romem and temperature calibration support on stm32mp157c. - Add SPDIFRX support on stm32mp157c. - Enable CEC on stm32mp157a-dk1/dk2. MCU part: - Add and enable SD card support (MMCI variant) on stm32h743 eval and disco boards. - Add romem and temperature calibration support on stm32f429 (and so stm32f469). - Enable stm32f769 clock driver * tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits) ARM: dts: stm32: enable cec on stm32mp157a-dk1 board ARM: dts: stm32: add cec pins muxing on stm32mp157 ARM: dts: stm32: add ltdc pins muxing on stm32mp157 ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157 ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2 ARM: dts: stm32: Enable STM32F769 clock driver ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board ARM: dts: stm32: add spdfirx pins to stm32mp157c ARM: dts: stm32: add spdifrx support on stm32mp157c ARM: dts: stm32: Add romem and temperature calibration on stm32f429 ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c ARM: dts: stm32: Add clock on stm32mp157c syscfg ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1 ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1 ARM: dts: stm32: add IPCC mailbox support on STM32MP157c ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board ARM: dts: stm32: add sdmmc1 support on stm32mp157c ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board ... Signed-off-by: Olof Johansson <[email protected]>
2019-04-28Merge tag 'aspeed-5.2-devicetree' of ↵Olof Johansson8-5/+117
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.2 - RTC and GFX DRM driver went upstream this cycle - Miscellaneous board updates for Facebook and IBM BMCs * tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add RTC node ARM: dts: aspeed: witherspoon: Update BMC partitioning ARM: dts: aspeed: cmm: enable iio-hwmon-adc ARM: dts: aspeed: tiogapass: Enable VUART ARM: dts: aspeed-g5: Add video engine ARM: dts: aspeed: Enable the GFX IP ARM: dts: aspeed-g5: Add resets and clocks to GFX node ARM: dts: aspeed: witherspoon: Enable vhub ARM: dts: aspeed: palmetto: Fix flash_memory region ARM: dts: aspeed: ast2500: Update flash layout Signed-off-by: Olof Johansson <[email protected]>
2019-04-28Merge tag 'renesas-arm64-dt-for-v5.2' of ↵Olof Johansson13-58/+499
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt Renesas ARM64 Based SoC DT Updates for v5.2 * R-Car Gen3 SoC based Salvator-X and Salvator-XS boards - Add GPIO keys support - Sort rwdt node alphabetically * R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs - Use extended audio DMAC register * R-Car M3-W (r8a7796) SoC - Remove unneeded sound #address/size-cells * R-Car M3-N (r8a77965) SoC - Add SSIU support for audio * R-Car E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs - Remove invalid compatible value for CSI40 * R-Car E3 (r8a77990) SoC - Cprrect SPDX license identifier style * R-Car E3 (r8a77990) based Ebisu board - Add BD9571 PMIC with DDR0 backup power config - Correct adv7482 hexadecimal register address - Add GPIO expander * R-Car E3 (r8a77990) based Ebisu and D3 (r8a77995) based Draak boards - Update bootargs to bring them into line with other R-Car Gen3 boards - Enable LVDS1 encoder * R-Car D3 (r8a77995) based Draak board - Correct EthernetAVB phy mode - Enable CAN0 and CAN1 * RZ/G2E (r8a774c0) SoC - Add CANFD support - Correct CPU node style * RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1) SoCs - Add clkp2 clock to CAN nodes * RZ/G2E (r8a774c0) based EK874 board - Add LED, CAN and RTC support * tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits) arm64: dts: renesas: salvator-common: Add GPIO keys support arm64: dts: renesas: use extended audio dmac register arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii arm64: dts: renesas: salvator-common: Sort node label arm64: dts: renesas: Update Ebisu and Draak bootargs arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes arm64: dts: renesas: r8a774c0: Add CANFD support arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40 arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1 arm64: dts: renesas: r8a774c0-cat874: Add RWDT support arm64: dts: renesas: ebisu: Enable VIN5 arm64: dts: renesas: r8a774c0-cat874: Add LEDs support arm64: dts: renesas: r8a774c0-cat874: add RTC support arm64: dts: renesas: cat875: Add CAN support arm64: dts: renesas: r8a774c0: Fix cpu nodes style arm64: dts: renesas: r8a77965: add SSIU support for sound ... Signed-off-by: Olof Johansson <[email protected]>
2019-04-28Merge tag 'v5.2-rockchip-dts64-1' of ↵Olof Johansson14-21/+1056
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Core new soc features are hdmi-cec for rk3328, scheduler capacity-values and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also directly got some additional features added after the boards itself. The Rock960 family (rock960+ficus) got their power-tree cleaned to match the schematics and also got hdmi-audio and their gpu enabled. Mali support also got enabled on the RockPi4 and finally both rk3328-rock64 and rk3328-roc-cc got some additional features. * tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits) arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy. arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller. arm64: dts: rockchip: Add nanopi4 ethernet phy arm64: dts: rockchip: Add PWM fan for NanoPC-T4 arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911) arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960 arm64: dts: rockchip: Add Nanopi NEO4 initial support arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64 arm64: dts: rockchip: Add support for the Orange Pi RK3399 board. arm64: dts: rockchip: enable mali on rock960 boards arm64: dts: rockchip: enable mali on Rock Pi 4 arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes arm64: dts: rockchip: give some life to the rk3328-roc-cc leds arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328 arm64: dts: rockchip: add ir-receiver node on rk3328-rock64 arm64: dts: rockchip: add leds node on rk3328-rock64 ... Signed-off-by: Olof Johansson <[email protected]>
2019-04-28Merge tag 'v5.2-rockchip-dts32-1' of ↵Olof Johansson11-17/+221
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Quite a bit of love for the rk3288-veyron chromeos devices and a number of cleanups for rk3288 from that area, hdmi support for the old rk3066 a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board. * tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808 ARM: dts: rockchip: add rk3066 hdmi nodes ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty ARM: dts: rockchip: Add vdd_logic to rk3288-veyron ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15 ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288 ARM: dts: rockchip: Enable WiFi on rk3288-tinker ARM: dts: rockchip: add grf reference in rk3288 tsadc node ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node Signed-off-by: Olof Johansson <[email protected]>
2019-04-28Merge tag 'amlogic-dt' of ↵Olof Johansson3-0/+62
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: Amlogic updates for v5.2 - add GPIO line names for odroid-c1 boards - support internal clock measure driver * tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: add the GPIO line names ARM: dts: meson8b: add the internal clock measurer ARM: dts: meson8: add the internal clock measurer Signed-off-by: Olof Johansson <[email protected]>
2019-04-28Merge tag 'amlogic-dt64' of ↵Olof Johansson9-0/+380
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: Amlogic updates for v5.2 Highlights - new board: SEI Robotics 510, based on S905X2 SoC (G12A) - enable more periphearls for S905X2 based boards * tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-g12a: Add CMA reserved memory arm64: dts: meson-g12a-x96-max: Enable BT Module arm64: dts: meson-g12a-x96-max: add regulators arm64: dts: meson-g12a-sei510: add regulators arm64: dts: meson-g12a-x96-max: add uart_AO pinctrl arm64: dts: meson-g12a-sei510: add uart_AO pinctrl arm64: dts: meson-g12a-u200: add uart_AO pinctrl arm64: dts: meson: g12a: Add UART A, B & C nodes and pins arm64: dts: meson: g12a: add reset controller arm64: dts: meson: g12a: add uart_ao_a pinctrl arm64: dts: meson: g12a: add pinctrl support controllers arm64: dts: meson: g12a: Add AO Clock + Reset Controller support arm64: dts: meson-gxm-nexbox-a1: Enable USB arm64: dts: meson: g12a: add efuse arm64: dts: meson: g12a: add secure monitor arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED arm64: dts: meson-g12a: Add AO Secure node arm64: dts: Add SEI Robotics SEI510 Board vendor-prefixes: Add prefix for Shenzhen SEI Robotics Co., Ltd Signed-off-by: Olof Johansson <[email protected]>
2019-04-15arm64: dts: hisilicon: hi3670: Add UFS controller supportManivannan Sadhasivam1-0/+18
Add UFS controller support for HiSilicon HI3670 SoC. Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2019-04-11ARM: dts: stm32: enable cec on stm32mp157a-dk1 boardYannick Fertré1-0/+7
Enable CEC (Consumer Electronics Control) device. Signed-off-by: Yannick Fertré <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add cec pins muxing on stm32mp157Yannick Fertré1-0/+21
Add a new pin muxing for cec. Signed-off-by: Yannick Fertré <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add ltdc pins muxing on stm32mp157Yannick Fertré1-0/+138
Add ltdc pins muxing on stm32mp157. Signed-off-by: Yannick Fertré <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157Yannick Fertré1-0/+29
Add I2C sleep pins muxing for low power mode. Signed-off-by: Pierre-Yves MORDRET <[email protected]> Signed-off-by: Yannick Fertré <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2Yannick Fertré1-0/+1
This patch adds a new property (power-supply) to panel otm8009a (orisetech) on stm32mp157c-dk2 & regulator v3v3. Signed-off-by: Yannick Fertré <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: Enable STM32F769 clock driverGabriel Fernandez1-0/+4
This patch enables clocks for STM32F769 boards. Signed-off-by: Gabriel Fernandez <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 boardPascal Paillet1-8/+150
This patch adds stpmic1 support on stm32mp157a dk1 board. The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. The DMAs are disabled because the PMIC generates a very few traffic and DMA channels may lack for other usage. Signed-off-by: Pascal Paillet <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 boardPascal Paillet1-16/+140
This patch adds stpmic1 support on stm32mp157c ed1 board. The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10 regulators, 3 power switches, a watchdog and an input for a power on key. The DMAs are disabled because the PMIC generates a very few traffic and DMA channels may lack for other usage. Signed-off-by: Pascal Paillet <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add spdfirx pins to stm32mp157cOlivier Moysan1-0/+13
This patch adds spdifrx support on stm32mp157c eval board. Signed-off-by: Olivier Moysan <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add spdifrx support on stm32mp157cOlivier Moysan1-0/+13
This patch adds support of STM32 SPDIFRX on stm32mp157c. Signed-off-by: Olivier Moysan <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: Add romem and temperature calibration on stm32f429Fabrice Gasnier1-0/+13
Add & enable stm32 factory-programmed memory. Describe temperature sensor calibration cells. Signed-off-by: Fabrice Gasnier <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: Add romem and temperature calibration on stm32mp157cFabrice Gasnier1-0/+13
Add & enable stm32 factory-programmed memory. Describe temperature sensor calibration cells. Non-volatile calibration data is made available by stm32mp157c bootrom in bsec_dataX registers. Signed-off-by: Fabrice Gasnier <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: Add clock on stm32mp157c syscfgFabrice Gasnier1-0/+1
STM32 syscfg needs a clock to access registers. Signed-off-by: Fabrice Gasnier <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1Fabien Dessenne1-0/+4
Enable STM32 IPCC mailbox driver for STM32MP157a-dk1 board. Signed-off-by: Fabien Dessenne <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1Fabien Dessenne1-0/+4
Enable STM32 IPCC mailbox driver for STM32MP157c-ed1 board. Signed-off-by: Fabien Dessenne <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add IPCC mailbox support on STM32MP157cFabien Dessenne1-0/+15
Add configuration on DT for IPCC mailbox driver. Signed-off-by: Fabien Dessenne <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 boardLudovic Barre1-0/+20
This patch adds sdmmc1 support on stm32mp157a dk1 board. Signed-off-by: Ludovic Barre <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 boardLudovic Barre2-0/+105
This patch adds sdmmc1 support on stm32mp157c ed1 board. Signed-off-by: Ludovic Barre <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add sdmmc1 support on stm32mp157cLudovic Barre1-0/+14
This patch adds support of sdmmc1 on stm32mp157c. Signed-off-by: Ludovic Barre <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add sdmmc1 support on stm32h743i disco boardLudovic Barre1-0/+20
This patch adds sdmmc1 support on stm32h743i disco board. Signed-off-by: Ludovic Barre <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add sdmmc1 support on stm32h743i eval boardLudovic Barre2-1/+90
This patch adds sdmmc1 support on stm32h743i eval board. This board has an external driver to control signal direction polarity. Signed-off-by: Ludovic Barre <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-11ARM: dts: stm32: add sdmmc1 support on stm32h743Ludovic Barre1-0/+14
This patch adds support of sdmmc1 on stm32h743. Signed-off-by: Ludovic Barre <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2019-04-10ARM: dts: exynos: Remove console argument from bootargsKrzysztof Kozlowski6-12/+11
Remove the "console=ttySAC..." argument from DTSes having a proper stdout-path property. To make the code functionally equivalent, add the serial port baud rate and parity. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Sylwester Nawrocki <[email protected]>
2019-04-10ARM: dts: exynos: Use stdout-path property instead of console in bootargsKrzysztof Kozlowski5-5/+8
Replacing bootargs with stdout-path property in chosen node allows using early console by adding just 'earlycon' parameter to the kernel command line. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Sylwester Nawrocki <[email protected]>
2019-04-08arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-maskJohn Stultz1-1/+1
A undocumented and unimplemented binding got into the hi3660 dtsi, and this switches that binding to the now documented one. Cc: Tanglei Han <[email protected]> Cc: Zhuangluan Su <[email protected]> Cc: Ryan Grachek <[email protected]> Cc: Manivannan Sadhasivam <[email protected]> Cc: Wei Xu <[email protected]> Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: John Stultz <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2019-04-08arm64: dts: hi3660: Add hisi asp dma deviceYoulin Wang1-0/+10
Add asp-dma device to hi3660 dts Cc: Tanglei Han <[email protected]> Cc: Zhuangluan Su <[email protected]> Cc: Ryan Grachek <[email protected]> Cc: Manivannan Sadhasivam <[email protected]> Cc: Wei Xu <[email protected]> Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Youlin Wang <[email protected]> Signed-off-by: Tanglei Han <[email protected]> Signed-off-by: John Stultz <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2019-04-08arm64: dts: hi3660: Add dma to uart nodesJohn Stultz1-0/+8
Try to add DMA support to the uart nodes following the assignments made in the dts from the victoria vendor kernel here: https://consumer.huawei.com/en/opensource/detail/?siteCode=worldwide&keywords=p10&fileType=openSourceSoftware&pageSize=10&curPage=1 Cc: Tanglei Han <[email protected]> Cc: Zhuangluan Su <[email protected]> Cc: Ryan Grachek <[email protected]> Cc: Manivannan Sadhasivam <[email protected]> Cc: Wei Xu <[email protected]> Cc: Rob Herring <[email protected]> Cc: Mark Rutland <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: John Stultz <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2019-04-08arm64: dts: hisilicon: hikey970: Add SD and WiFi supportManivannan Sadhasivam2-0/+190
Add SD and WiFi support for HiKey970 board based on HI3670 SoC. Due to the absence of the PMIC driver, fixed regulators are sourced to make the driver working. Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2019-04-08arm64: dts: hisilicon: hi3670: Add MMC controller supportManivannan Sadhasivam1-0/+37
Add MMC controller support for HiSilicon HI3670 SoC reusing the HI3660 Designware MMC driver. There are 2 DWMMC controllers present in this SoC: 1. DWMMC1 is used for SD card (SD) 2. DWMMC2 is used for WiFi (SDIO) Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2019-04-08dt-bindings: mmc: Add HI3670 MMC controller bindingManivannan Sadhasivam1-0/+2
HI3670 SoC is architecturally same as the HI3660 SoC. Hence, the same K3 specific designware driver is reused for HI3670 SoC and the binding is documented with fallback approach for compatible property. Signed-off-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2019-04-08arm64: dts: hisilicon: hi3670: Add reset controller supportManivannan Sadhasivam1-0/+7
Add reset controller support for HiSilicon HI3670 SoC. Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2019-04-08dt-bindings: reset: Add HI3670 reset controller bindingManivannan Sadhasivam1-3/+4
HI3670 SoC is architecturally same as the HI3660 SoC. Hence, the same driver is reused for HI3670 SoC and the binding is documented here which uses the fallback approach. Signed-off-by: Manivannan Sadhasivam <[email protected]> Acked-by: Philipp Zabel <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2019-04-05ARM: dts: aspeed: Add RTC nodeJoel Stanley2-0/+12
The ASPEED ast2400 and ast2500 both contain an on board RTC device. Signed-off-by: Joel Stanley <[email protected]>
2019-04-05ARM: dts: aspeed: witherspoon: Update BMC partitioningEdward A. James1-2/+38
Add simplified partitions for BMC and alternate flash. Include these by default in Witherspoon. Signed-off-by: Edward A. James <[email protected]> Signed-off-by: Adriana Kobylak <[email protected]> Reviewed-by: Cédric Le Goater <[email protected]> Reviewed-by: Andrew Jeffery <[email protected]> Signed-off-by: Joel Stanley <[email protected]>
2019-04-05ARM: dts: aspeed: cmm: enable iio-hwmon-adcTao Ren1-0/+6
Bind aspeed ADC channels 0-7 to "iio-hwmon" driver so the data of these voltage sensing channels can be accessed by "lm_sensors". Channels 8-15 are not used on CMM BMC. Signed-off-by: Tao Ren <[email protected]> Signed-off-by: Joel Stanley <[email protected]>
2019-04-05ARM: dts: aspeed: tiogapass: Enable VUARTVijay Khemka1-0/+5
Enabling vuart for Facebook tiogapass Signed-off-by: Vijay Khemka <[email protected]> Signed-off-by: Joel Stanley <[email protected]>
2019-04-05ARM: dts: aspeed-g5: Add video engineEddie James1-0/+10
Add a node to describe the video engine on the AST2500. Signed-off-by: Eddie James <[email protected]> Signed-off-by: Joel Stanley <[email protected]>
2019-04-05ARM: dts: aspeed: Enable the GFX IPJoel Stanley3-1/+35
The GFX controller is the internal graphics device used by the SoC (opposed to the one connected via the PCIe device and used by the host). This configures it with a framebuffer region and adds it to the command line so kernel boot messages appear on the display. Enabled for Romulus, Witherspoon, and the ASPEED AST2500 EVB. Reviewed-by: Andrew Jeffery <[email protected]> Signed-off-by: Joel Stanley <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.