aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-25net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} buildPablo Neira Ayuso10-34/+47
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’: net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’ pkt->skb->tc_redirected = 1; ^~ net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’ pkt->skb->tc_from_ingress = 1; ^~ To avoid a direct dependency with tc actions from netfilter, wrap the redirect bits around CONFIG_NET_REDIRECT and move helpers to include/linux/skbuff.h. Turn on this toggle from the ifb driver, the only existing client of these bits in the tree. This patch adds skb_set_redirected() that sets on the redirected bit on the skbuff, it specifies if the packet was redirect from ingress and resets the timestamp (timestamp reset was originally missing in the netfilter bugfix). Fixes: bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress") Reported-by: [email protected] Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25net: ena: Add PCI shutdown handler to allow safe kexecGuilherme G. Piccoli1-10/+41
Currently ENA only provides the PCI remove() handler, used during rmmod for example. This is not called on shutdown/kexec path; we are potentially creating a failure scenario on kexec: (a) Kexec is triggered, no shutdown() / remove() handler is called for ENA; instead pci_device_shutdown() clears the master bit of the PCI device, stopping all DMA transactions; (b) Kexec reboot happens and the device gets enabled again, likely having its FW with that DMA transaction buffered; then it may trigger the (now invalid) memory operation in the new kernel, corrupting kernel memory area. This patch aims to prevent this, by implementing a shutdown() handler quite similar to the remove() one - the difference being the handling of the netdev, which is unregistered on remove(), but following the convention observed in other drivers, it's only detached on shutdown(). This prevents an odd issue in AWS Nitro instances, in which after the 2nd kexec the next one will fail with an initrd corruption, caused by a wild DMA write to invalid kernel memory. The lspci output for the adapter present in my instance is: 00:05.0 Ethernet controller [0200]: Amazon.com, Inc. Elastic Network Adapter (ENA) [1d0f:ec20] Suggested-by: Gavin Shan <[email protected]> Signed-off-by: Guilherme G. Piccoli <[email protected]> Acked-by: Sameeh Jubran <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25selftests/net/forwarding: define libs as TEST_PROGS_EXTENDEDHangbin Liu2-15/+16
The lib files should not be defined as TEST_PROGS, or we will run them in run_kselftest.sh. Also remove ethtool_lib.sh exec permission. Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25selftests/net: add missing tests to MakefileHangbin Liu1-1/+3
Find some tests are missed in Makefile by running: for file in $(ls *.sh); do grep -q $file Makefile || echo $file; done Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-25Merge tag 'zonefs-5.6-rc7' of ↵Linus Torvalds2-12/+34
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs fix from Damien Le Moal: "A single fix from me to correctly handle the size of read-only zone files" * tag 'zonefs-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonfs: Fix handling of read-only zones
2020-03-25drm/radeon: fix scatter-gather mapping with user pagesShane Francis1-1/+1
Calls to dma_map_sg may return less segments / entries than requested if they fall on page bounderies. The old implementation did not support this use case. Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206461 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206895 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1056 Signed-off-by: Shane Francis <[email protected]> Reviewed-by: Michael J. Ruhl <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Cc: [email protected]
2020-03-25drm/amdgpu: fix scatter-gather mapping with user pagesShane Francis1-1/+1
Calls to dma_map_sg may return less segments / entries than requested if they fall on page bounderies. The old implementation did not support this use case. Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206461 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206895 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1056 Signed-off-by: Shane Francis <[email protected]> Reviewed-by: Michael J. Ruhl <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Cc: [email protected]
2020-03-25drm/prime: use dma length macro when mapping sgShane Francis1-1/+1
As dma_map_sg can reorganize scatter-gather lists in a way that can cause some later segments to be empty we should always use the sg_dma_len macro to fetch the actual length. This could now be 0 and not need to be mapped to a page or address array Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206461 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206895 Bug: https://gitlab.freedesktop.org/drm/amd/issues/1056 Signed-off-by: Shane Francis <[email protected]> Reviewed-by: Michael J. Ruhl <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Cc: [email protected]
2020-03-25soc: samsung: chipid: Fix return value on non-Exynos platformsMarek Szyprowski1-1/+1
Correct the probe return value to -ENODEV on non-Exynos platforms. Link: https://lore.kernel.org/r/[email protected] Fixes: 02fb29882d5c ("soc: samsung: chipid: Drop "syscon" compatible requirement") Cc: <[email protected]> Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-03-25Merge tag 'tee-amdtee-fix2-for-5.6' of ↵Arnd Bergmann1-0/+3
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes tee: amdtee: out of bounds read in find_session() * tag 'tee-amdtee-fix2-for-5.6' of https://git.linaro.org/people/jens.wiklander/linux-tee: tee: amdtee: out of bounds read in find_session() Link: https://lore.kernel.org/r/20200320063446.GA9892@jade Signed-off-by: Arnd Bergmann <[email protected]>
2020-03-25Merge tag 'oxnas-arm-soc-dt-fixes-for-5.6' of ↵Arnd Bergmann2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas into arm/fixes - interrupt controller mask init fix to avoid spurious irq after soft reset * tag 'oxnas-arm-soc-dt-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/narmstrong/linux-oxnas: ARM: dts: oxnas: Fix clear-mask property Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-03-25Merge tag 'arm-soc/for-5.6/devicetree-fixes-part2' of ↵Arnd Bergmann2-0/+2
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.6, please pull the following: - Nick fixes the missing pinctrl-names property for the Raspberry Pi Zero Wireless DTS - Nicolas fixes the VC4 firmware node dma-range property which does not have the limitations of the soc's bus node * tag 'arm-soc/for-5.6/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations ARM: bcm2835-rpi-zero-w: Add missing pinctrl name Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-03-25arm64: dts: Fix leftover entry-methods for PSCILinus Walleij2-2/+2
These two device trees were either missed or added after the commit correcting the "entry-method" from "arm,psci" to just "psci" as per the binding. Link: https://lore.kernel.org/r/[email protected] Cc: Sudeep Holla <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Chunyan Zhang <[email protected]> Reviewed-by: Amit Kucheria <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Sudeep Holla <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-03-25Merge tag 'omap-for-v5.6/fixes-rc6-signed' of ↵Arnd Bergmann8-24/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few more fixes for omaps Just few dts fixes: - A fix droid4 touchscreen stopping working with lost gpio interrupts - Also limit omap5 dma range similar to what we've recently done for dra7 * tag 'omap-for-v5.6/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Add bus_dma_limit for L3 bus ARM: dts: omap4-droid4: Fix lost touchscreen interrupts ARM: dts: dra7: Add bus_dma_limit for L3 bus ARM: dts: N900: fix onenand timings ARM: dts: Fix dm814x Ethernet by changing to use rgmii-id mode Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-03-25ARM: dts: exynos: Fix regulator node aliasing on Midas-based boardsMarek Szyprowski2-3/+3
Commit d4ec0cb05064 ("ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas family") added a new fixed regulator ("voltage-regulator-6") to base "midas" .dtsi, but it didn't update the clients of that .dtsi, which define their own fixed regulators starting from the "voltage-regulator-6". This results in aliasing of the regulator dt nodes and breaks operation of OLED panel due to lack of power supply. Fix this by increasing the numbers in the fixed regulator names for those boards. Link: https://lore.kernel.org/r/[email protected] Fixes: d4ec0cb05064 ("ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas family") Signed-off-by: Marek Szyprowski <[email protected]> Reviewed-by: Denis 'GNUtoo' Carikli <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-03-25Merge tag 'imx-fixes-5.6-2' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.6, round 2: - Fix minimum voltage setting of vdd_arm and vdd_soc on i.MX6 phycore-som board. * tag 'imx-fixes-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6: phycore-som: fix arm and soc minimum voltage Link: https://lore.kernel.org/r/20200316032555.GD17221@dragon Signed-off-by: Arnd Bergmann <[email protected]>
2020-03-25RDMA/mlx5: Block delay drop to unprivileged usersMaor Gottlieb1-0/+4
It has been discovered that this feature can globally block the RX port, so it should be allowed for highly privileged users only. Fixes: 03404e8ae652("IB/mlx5: Add support to dropless RQ") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-25Merge tag 'sunxi-fixes-for-5.6-2' of ↵Arnd Bergmann2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for 5.6 - part 2 This follows up on the previous 5.6 fixes tag with a fix for the A33 Security System (crypto offloading hardware). The hardware was found to not be compatible with existing hardware and a new compatible was needed. The driver change was picked up right before the previous -rc6 and the DT bindings and DT changes were not picked up. The goal is to have all the changes in the same release, that is v5.6. * tag 'sunxi-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a33: add the new SS compatible dt-bindings: crypto: add new compatible for A33 SS Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-03-25Merge tag 'sunxi-fixes-for-5.6' of ↵Arnd Bergmann4-70/+70
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for v5.6 A pretty normal set of fixes for v5.6: - Fix reversed macros used for A83T EMAC clock and reset - Fix camera regulator voltage and USB OTG for TBS-A711 - 16-bit / 8-bit mixed read fix for our RSB driver - Fix SPI controller base address for R40 - Reorder device nodes based on base address for R40 * tag 'sunxi-fixes-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: r40: Move SPI device nodes based on address order ARM: dts: sun8i: r40: Fix register base address for SPI2 and SPI3 ARM: dts: sun8i: r40: Move AHCI device node based on address order bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads ARM: dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage ARM: dts: sun8i: a83t: Fix incorrect clk and reset macros for EMAC device Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-03-25Merge tag 'soc-fsl-fix-v5.6' of ↵Arnd Bergmann1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes NXP/FSL soc driver fixes for v5.6 DPAA2 DPIO - Fix a kernel hang caused by irq requested before creating dpio * tag 'soc-fsl-fix-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: dpio: register dpio irq handlers after dpio create Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-03-25ieee80211: fix HE SPR size calculationJohannes Berg1-2/+2
The he_sr_control field is just a u8, so le32_to_cpu() shouldn't be applied to it; this was evidently copied from ieee80211_he_oper_size(). Fix it, and also adjust the type of the local variable. Fixes: ef11a931bd1c ("mac80211: HE: add Spatial Reuse element parsing support") Signed-off-by: Johannes Berg <[email protected]> Link: https://lore.kernel.org/r/20200325090918.dfe483b49e06.Ia53622f23b2610a2ae6ea39a199866196fe946c1@changeid Signed-off-by: Johannes Berg <[email protected]>
2020-03-25nl80211: fix NL80211_ATTR_CHANNEL_WIDTH attribute typeJohannes Berg1-1/+1
The new opmode notification used this attribute with a u8, when it's documented as a u32 and indeed used in userspace as such, it just happens to work on little-endian systems since userspace isn't doing any strict size validation, and the u8 goes into the lower byte. Fix this. Cc: [email protected] Fixes: 466b9936bf93 ("cfg80211: Add support to notify station's opmode change to userspace") Signed-off-by: Johannes Berg <[email protected]> Link: https://lore.kernel.org/r/20200325090531.be124f0a11c7.Iedbf4e197a85471ebd729b186d5365c0343bf7a8@changeid Signed-off-by: Johannes Berg <[email protected]>
2020-03-25Merge branch 'feature/staging_sm5' of ↵Dave Airlie25-1050/+3252
git://people.freedesktop.org/~sroland/linux into drm-next vmwgfx pull for for 5.7. Needed for GL4 functionality. Sync up device headers, add support for new commands, code refactoring around surface definition. Signed-off-by: Dave Airlie <[email protected]> From: "Roland Scheidegger (VMware)" <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-25Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into ↵Dave Airlie11-35/+230
drm-next - fix for potential out-of-bounds reads in the perfmon ioctl implementation from Christian - override to expose proper feature flags for the GC400 found on the STM32MP1 SoC, also from Christian - Guido fixed an issue where we would spuriously fail to enter runtime suspend due to a new GPU engine status bit on GC7000 - tree-wide change from Gustavo to get rid of zero-length arrays - fix for missed TS cache flush on GC7000, leading to spurious MMU faults from me - request pages from DMA32 zone on systems where we can't address all present memory from me Signed-off-by: Dave Airlie <[email protected]> From: Lucas Stach <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-24scsi: sd: Fix optimal I/O size for devices that change reported valuesMartin K. Petersen1-1/+3
Some USB bridge devices will return a default set of characteristics during initialization. And then, once an attached drive has spun up, substitute the actual parameters reported by the drive. According to the SCSI spec, the device should return a UNIT ATTENTION in case any reported parameters change. But in this case the change is made silently after a small window where default values are reported. Commit a83da8a4509d ("scsi: sd: Optimal I/O size should be a multiple of physical block size") validated the reported optimal I/O size against the physical block size to overcome problems with devices reporting nonsensical transfer sizes. However, this validation did not account for the fact that aforementioned devices will return default values during a brief window during spin-up. The subsequent change in reported characteristics would invalidate the checking that had previously been performed. Unset a previously configured optimal I/O size should the sanity checking fail on subsequent revalidate attempts. Link: https://lore.kernel.org/r/[email protected] Cc: Bryan Gurney <[email protected]> Cc: <[email protected]> Reported-by: Bernhard Sulzer <[email protected]> Tested-by: Bernhard Sulzer <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-03-25zonfs: Fix handling of read-only zonesDamien Le Moal2-12/+34
The write pointer of zones in the read-only consition is defined as invalid by the SCSI ZBC and ATA ZAC specifications. It is thus not possible to determine the correct size of a read-only zone file on mount. Fix this by handling read-only zones in the same manner as offline zones by disabling all accesses to the zone (read and write) and initializing the inode size of the read-only zone to 0). For zones found to be in the read-only condition at runtime, only disable write access to the zone and keep the size of the zone file to its last updated value to allow the user to recover previously written data. Also fix zonefs documentation file to reflect this change. Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]>
2020-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller8-17/+818
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) A new selftest for nf_queue, from Florian Westphal. This test covers two recent fixes: 07f8e4d0fddb ("tcp: also NULL skb->dev when copy was needed") and b738a185beaa ("tcp: ensure skb->dev is NULL before leaving TCP stack"). 2) The fwd action breaks with ifb. For safety in next extensions, make sure the fwd action only runs from ingress until it is extended to be used from a different hook. 3) The pipapo set type now reports EEXIST in case of subrange overlaps. Update the rbtree set to validate range overlaps, so far this validation is only done only from userspace. From Stefano Brivio. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-03-24Merge tag 'mlx5-fixes-2020-03-24' of ↵David S. Miller8-18/+41
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-03-24 This series introduces some fixes to mlx5 driver. From Aya, Fixes to the RX error recovery flows From Leon, Fix IB capability mask Please pull and let me know if there is any problem. For -stable v5.5 ('net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure') For -stable v5.4 ('net/mlx5e: Fix ICOSQ recovery flow with Striding RQ') ('net/mlx5e: Do not recover from a non-fatal syndrome') ('net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset') ('net/mlx5e: Enhance ICOSQ WQE info fields') The above patch ('net/mlx5e: Enhance ICOSQ WQE info fields') will fail to apply cleanly on v5.4 due to a trivial contextual conflict, but it is an important fix, do I need to do something about it or just assume Greg will know how to handle this ? ==================== Signed-off-by: David S. Miller <[email protected]>
2020-03-24r8169: re-enable MSI on RTL8168cHeiner Kallweit1-1/+1
The original change fixed an issue on RTL8168b by mimicking the vendor driver behavior to disable MSI on chip versions before RTL8168d. This however now caused an issue on a system with RTL8168c, see [0]. Therefore leave MSI disabled on RTL8168b, but re-enable it on RTL8168c. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1792839 Fixes: 003bd5b4a7b4 ("r8169: don't use MSI before RTL8168d") Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: phy: mdio-bcm-unimac: Fix clock handlingAndre Przywara1-4/+2
The DT binding for this PHY describes an *optional* clock property. Due to a bug in the error handling logic, we are actually ignoring this clock *all* of the time so far. Fix this by using devm_clk_get_optional() to handle this clock properly. Fixes: b78ac6ecd1b6b ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider") Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24cxgb4/ptp: pass the sign of offset delta in FW CMDRaju Rangoju1-0/+3
cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta in FW_PTP_CMD. Fix it by passing correct sign. Signed-off-by: Raju Rangoju <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_popVladimir Oltean3-60/+9
Not only did this wheel did not need reinventing, but there is also an issue with it: It doesn't remove the VLAN header in a way that preserves the L2 payload checksum when that is being provided by the DSA master hw. It should recalculate checksum both for the push, before removing the header, and for the pull afterwards. But the current implementation is quite dizzying, with pulls followed immediately afterwards by pushes, the memmove is done before the push, etc. This makes a DSA master with RX checksumming offload to print stack traces with the infamous 'hw csum failure' message. So remove the dsa_8021q_remove_header function and replace it with something that actually works with inet checksumming. Fixes: d461933638ae ("net: dsa: tag_8021q: Create helper function for removing VLAN header") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: cbs: Fix software cbs to consider packet sending timeZh-yuan Ye1-1/+11
Currently the software CBS does not consider the packet sending time when depleting the credits. It caused the throughput to be Idleslope[kbps] * (Port transmit rate[kbps] / |Sendslope[kbps]|) where Idleslope * (Port transmit rate / (Idleslope + |Sendslope|)) = Idleslope is expected. In order to fix the issue above, this patch takes the time when the packet sending completes into account by moving the anchor time variable "last" ahead to the send completion time upon transmission and adding wait when the next dequeue request comes before the send completion time of the previous packet. changelog: V2->V3: - remove unnecessary whitespace cleanup - add the checks if port_rate is 0 before division V1->V2: - combine variable "send_completed" into "last" - add the comment for estimate of the packet sending Fixes: 585d763af09c ("net/sched: Introduce Credit Based Shaper (CBS) qdisc") Signed-off-by: Zh-yuan Ye <[email protected]> Reviewed-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24Input: avoid BIT() macro usage in the serio.h UAPI headerEugene Syromiatnikov1-5/+5
The commit 19ba1eb15a2a ("Input: psmouse - add a custom serio protocol to send extra information") introduced usage of the BIT() macro for SERIO_* flags; this macro is not provided in UAPI headers. Replace if with similarly defined _BITUL() macro defined in <linux/const.h>. Fixes: 19ba1eb15a2a ("Input: psmouse - add a custom serio protocol to send extra information") Signed-off-by: Eugene Syromiatnikov <[email protected]> Cc: <[email protected]> # v5.0+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-03-24RDMA/mlx5: Fix access to wrong pointer while performing flush due to errorLeon Romanovsky3-2/+27
The main difference between send and receive SW completions is related to separate treatment of WQ queue. For receive completions, the initial index to be flushed is stored in "tail", while for send completions, it is in deleted "last_poll". CPU: 54 PID: 53405 Comm: kworker/u161:0 Kdump: loaded Tainted: G OE --------- -t - 4.18.0-147.el8.ppc64le #1 Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] NIP: c000003c7c00a000 LR: c00800000e586af4 CTR: c000003c7c00a000 REGS: c0000036cc9db940 TRAP: 0400 Tainted: G OE --------- -t - (4.18.0-147.el8.ppc64le) MSR: 9000000010009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24004488 XER: 20040000 CFAR: c00800000e586af0 IRQMASK: 0 GPR00: c00800000e586ab4 c0000036cc9dbbc0 c00800000e5f1a00 c0000037d8433800 GPR04: c000003895a26800 c0000037293f2000 0000000000000201 0000000000000011 GPR08: c000003895a26c80 c000003c7c00a000 0000000000000000 c00800000ed30438 GPR12: c000003c7c00a000 c000003fff684b80 c00000000017c388 c00000396ec4be40 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c00000000151e498 0000000000000010 c000003895a26848 0000000000000010 GPR24: 0000000000000010 0000000000010000 c000003895a26800 0000000000000000 GPR28: 0000000000000010 c0000037d8433800 c000003895a26c80 c000003895a26800 NIP [c000003c7c00a000] 0xc000003c7c00a000 LR [c00800000e586af4] __ib_process_cq+0xec/0x1b0 [ib_core] Call Trace: [c0000036cc9dbbc0] [c00800000e586ab4] __ib_process_cq+0xac/0x1b0 [ib_core] (unreliable) [c0000036cc9dbc40] [c00800000e586c88] ib_cq_poll_work+0x40/0xb0 [ib_core] [c0000036cc9dbc70] [c000000000171f44] process_one_work+0x2f4/0x5c0 [c0000036cc9dbd10] [c000000000172a0c] worker_thread+0xcc/0x760 [c0000036cc9dbdc0] [c00000000017c52c] kthread+0x1ac/0x1c0 [c0000036cc9dbe30] [c00000000000b75c] ret_from_kernel_thread+0x5c/0x80 Fixes: 8e3b68830186 ("RDMA/mlx5: Delete unreachable handle_atomic code by simplifying SW completion") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-24RDMA/core: Ensure security pkey modify is not lostMike Marciniszyn1-8/+3
The following modify sequence (loosely based on ipoib) will lose a pkey modifcation: - Modify (pkey index, port) - Modify (new pkey index, NO port) After the first modify, the qp_pps list will have saved the pkey and the unit on the main list. During the second modify, get_new_pps() will fetch the port from qp_pps and read the new pkey index from qp_attr->pkey_index. The state will still be zero, or IB_PORT_PKEY_NOT_VALID. Because of the invalid state, the new values will never replace the one in the qp pps list, losing the new pkey. This happens because the following if statements will never correct the state because the first term will be false. If the code had been executed, it would incorrectly overwrite valid values. if ((qp_attr_mask & IB_QP_PKEY_INDEX) && (qp_attr_mask & IB_QP_PORT)) new_pps->main.state = IB_PORT_PKEY_VALID; if (!(qp_attr_mask & (IB_QP_PKEY_INDEX | IB_QP_PORT)) && qp_pps) { new_pps->main.port_num = qp_pps->main.port_num; new_pps->main.pkey_index = qp_pps->main.pkey_index; if (qp_pps->main.state != IB_PORT_PKEY_NOT_VALID) new_pps->main.state = IB_PORT_PKEY_VALID; } Fix by joining the two if statements with an or test to see if qp_pps is non-NULL and in the correct state. Fixes: 1dd017882e01 ("RDMA/core: Fix protection fault in get_pkey_idx_qp_list") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Kaike Wan <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-24MAINTAINERS: Clean RXE section and add Zhu as RXE maintainerLeon Romanovsky1-3/+1
Zhu Yanjun contributed many patches to RXE and expressed genuine interest in improve RXE even more. Let's add him as a maintainer. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Acked-by: Moni Shoua <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-24Input: synaptics-rmi4 - set reduced reporting mode only when requestedAndrew Duggan1-2/+2
The previous patch "c5ccf2ad3d33 (Input: synaptics-rmi4 - switch to reduced reporting mode)" enabled reduced reporting mode unintentionally on some devices, if the firmware was configured with default Delta X/Y threshold values. The result unintentionally degrade the performance of some touchpads. This patch checks to see that the driver is modifying the delta X/Y thresholds before modifying the reporting mode. Signed-off-by: Andrew Duggan <[email protected]> Fixes: c5ccf2ad3d33 ("Input: synaptics-rmi4 - switch to reduced reporting mode") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-03-24Input: synaptics - enable RMI on HP Envy 13-ad105ngYussuf Khalil1-0/+1
This laptop (and perhaps other variants of the same model) reports an SMBus-capable Synaptics touchpad. Everything (including suspend and resume) works fine when RMI is enabled via the kernel command line, so let's add it to the whitelist. Signed-off-by: Yussuf Khalil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-03-24net/mlx5e: Do not recover from a non-fatal syndromeAya Levin1-2/+1
For non-fatal syndromes like LOCAL_LENGTH_ERR, recovery shouldn't be triggered. In these scenarios, the RQ is not actually in ERR state. This misleads the recovery flow which assumes that the RQ is really in error state and no more completions arrive, causing crashes on bad page state. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-03-24net/mlx5e: Fix ICOSQ recovery flow with Striding RQAya Levin3-8/+26
In striding RQ mode, the buffers of an RX WQE are first prepared and posted to the HW using a UMR WQEs via the ICOSQ. We maintain the state of these in-progress WQEs in the RQ SW struct. In the flow of ICOSQ recovery, the corresponding RQ is not in error state, hence: - The buffers of the in-progress WQEs must be released and the RQ metadata should reflect it. - Existing RX WQEs in the RQ should not be affected. For this, wrap the dealloc of the in-progress WQEs in a function, and use it in the ICOSQ recovery flow instead of mlx5e_free_rx_descs(). Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-03-24net/mlx5e: Fix missing reset of SW metadata in Striding RQ resetAya Levin1-2/+4
When resetting the RQ (moving RQ state from RST to RDY), the driver resets the WQ's SW metadata. In striding RQ mode, we maintain a field that reflects the actual expected WQ head (including in progress WQEs posted to the ICOSQ). It was mistakenly not reset together with the WQ. Fix this here. Fixes: 8276ea1353a4 ("net/mlx5e: Report and recover from CQE with error on RQ") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-03-24net/mlx5e: Enhance ICOSQ WQE info fieldsAya Levin3-6/+7
Add number of WQEBBs (WQE's Basic Block) to WQE info struct. Set the number of WQEBBs on WQE post, and increment the consumer counter (cc) on completion. In case of error completions, the cc was mistakenly not incremented, keeping a gap between cc and pc (producer counter). This failed the recovery flow on the ICOSQ from a CQE error which timed-out waiting for the cc and pc to meet. Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-03-24net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failureLeon Romanovsky1-0/+3
The cap_mask1 isn't protected by field_select and not listed among RW fields, but it is required to be written to properly initialize ports in IB virtualization mode. Link: https://lore.kernel.org/linux-rdma/[email protected] Fixes: ab118da4c10a ("net/mlx5: Don't write read-only fields in MODIFY_HCA_VPORT_CONTEXT command") Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-03-24i2c: nvidia-gpu: Handle timeout correctly in gpu_i2c_check_status()Kai-Heng Feng1-12/+8
Nvidia card may come with a "phantom" UCSI device, and its driver gets stuck in probe routine, prevents any system PM operations like suspend. There's an unaccounted case that the target time can equal to jiffies in gpu_i2c_check_status(), let's solve that by using readl_poll_timeout() instead of jiffies comparison functions. Fixes: c71bcdcb42a7 ("i2c: add i2c bus driver for NVIDIA GPU") Suggested-by: Andy Shevchenko <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Ajay Gupta <[email protected]> Tested-by: Ajay Gupta <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-03-24selftests: netfilter: add nfqueue test caseFlorian Westphal4-1/+695
Add a test case to check nf queue infrastructure. Could be extended in the future to also cover serialization of conntrack, uid and secctx attributes in nfqueue. For now, this checks that 'queue bypass' works, that a queue rule with no bypass option blocks traffic and that userspace receives the expected number of packets. For this we add two queues and hook all of prerouting/input/forward/output/postrouting. Packets get queued twice with a dummy base chain in between: This passes with current nf tree, but reverting commit 946c0d8e6ed4 ("netfilter: nf_queue: fix reinject verdict handling") makes this trip (it processes 30 instead of expected 20 packets). v2: update config file with queue and other options missing/needed for other tests. v3: also test with tcp, this reveals problem with commit 28f8bfd1ac94 ("netfilter: Support iif matches in POSTROUTING"), due to skb->dev pointing at another skb in the retransmit rbtree (skb->dev aliases to rbnode child). Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-24netfilter: nft_fwd_netdev: allow to redirect to ifb via ingressPablo Neira Ayuso1-0/+4
Set skb->tc_redirected to 1, otherwise the ifb driver drops the packet. Set skb->tc_from_ingress to 1 to reinject the packet back to the ingress path after leaving the ifb egress path. This patch inconditionally sets on these two skb fields that are meaningful to the ifb driver. The existing forward action is guaranteed to run from ingress path. Fixes: 39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-24netfilter: nft_fwd_netdev: validate family and chain typePablo Neira Ayuso1-0/+9
Make sure the forward action is only used from ingress. Fixes: 39e6dea28adc ("netfilter: nf_tables: add forward expression to the netdev family") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-24netfilter: nft_set_rbtree: Detect partial overlaps on insertionStefano Brivio1-3/+67
...and return -ENOTEMPTY to the front-end in this case, instead of proceeding. Currently, nft takes care of checking for these cases and not sending them to the kernel, but if we drop the set_overlap() call in nft we can end up in situations like: # nft add table t # nft add set t s '{ type inet_service ; flags interval ; }' # nft add element t s '{ 1 - 5 }' # nft add element t s '{ 6 - 10 }' # nft add element t s '{ 4 - 7 }' # nft list set t s table ip t { set s { type inet_service flags interval elements = { 1-3, 4-5, 6-7 } } } This change has the primary purpose of making the behaviour consistent with nft_set_pipapo, but is also functional to avoid inconsistent behaviour if userspace sends overlapping elements for any reason. v2: When we meet the same key data in the tree, as start element while inserting an end element, or as end element while inserting a start element, actually check that the existing element is active, before resetting the overlap flag (Pablo Neira Ayuso) Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-24netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()Stefano Brivio1-6/+11
Replace negations of nft_rbtree_interval_end() with a new helper, nft_rbtree_interval_start(), wherever this helps to visualise the problem at hand, that is, for all the occurrences except for the comparison against given flags in __nft_rbtree_get(). This gets especially useful in the next patch. Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.