| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
"Since Martin is on vacation you get the s390 pull request from me:
- Host large page support for KVM guests. As the patches have large
impact on arch/s390/mm/ this series goes out via both the KVM and
the s390 tree.
- Add an option for no compression to the "Kernel compression mode"
menu, this will come in handy with the rework of the early boot
code.
- A large rework of the early boot code that will make life easier
for KASAN and KASLR. With the rework the bootable uncompressed
image is not generated anymore, only the bzImage is available. For
debuggung purposes the new "no compression" option is used.
- Re-enable the gcc plugins as the issue with the latent entropy
plugin is solved with the early boot code rework.
- More spectre relates changes:
+ Detect the etoken facility and remove expolines automatically.
+ Add expolines to a few more indirect branches.
- A rewrite of the common I/O layer trace points to make them
consumable by 'perf stat'.
- Add support for format-3 PCI function measurement blocks.
- Changes for the zcrypt driver:
+ Add attributes to indicate the load of cards and queues.
+ Restructure some code for the upcoming AP device support in KVM.
- Build flags improvements in various Makefiles.
- A few fixes for the kdump support.
- A couple of patches for gcc 8 compile warning cleanup.
- Cleanup s390 specific proc handlers.
- Add s390 support to the restartable sequence self tests.
- Some PTR_RET vs PTR_ERR_OR_ZERO cleanup.
- Lots of bug fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (107 commits)
s390/dasd: fix hanging offline processing due to canceled worker
s390/dasd: fix panic for failed online processing
s390/mm: fix addressing exception after suspend/resume
rseq/selftests: add s390 support
s390: fix br_r1_trampoline for machines without exrl
s390/lib: use expoline for all bcr instructions
s390/numa: move initial setup of node_to_cpumask_map
s390/kdump: Fix elfcorehdr size calculation
s390/cpum_sf: save TOD clock base in SDBs for time conversion
KVM: s390: Add huge page enablement control
s390/mm: Add huge page gmap linking support
s390/mm: hugetlb pages within a gmap can not be freed
KVM: s390: Add skey emulation fault handling
s390/mm: Add huge pmd storage key handling
s390/mm: Clear skeys for newly mapped huge guest pmds
s390/mm: Clear huge page storage keys on enable_skey
s390/mm: Add huge page dirty sync support
s390/mm: Add gmap pmd invalidation and clearing
s390/mm: Add gmap pmd notification bit setting
s390/mm: Add gmap pmd linking
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer updates from Thomas Gleixner:
"Early TSC based time stamping to allow better boot time analysis.
This comes with a general cleanup of the TSC calibration code which
grew warts and duct taping over the years and removes 250 lines of
code. Initiated and mostly implemented by Pavel with help from various
folks"
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
x86/kvmclock: Mark kvm_get_preset_lpj() as __init
x86/tsc: Consolidate init code
sched/clock: Disable interrupts when calling generic_sched_clock_init()
timekeeping: Prevent false warning when persistent clock is not available
sched/clock: Close a hole in sched_clock_init()
x86/tsc: Make use of tsc_calibrate_cpu_early()
x86/tsc: Split native_calibrate_cpu() into early and late parts
sched/clock: Use static key for sched_clock_running
sched/clock: Enable sched clock early
sched/clock: Move sched clock initialization and merge with generic clock
x86/tsc: Use TSC as sched clock early
x86/tsc: Initialize cyc2ns when tsc frequency is determined
x86/tsc: Calibrate tsc only once
ARM/time: Remove read_boot_clock64()
s390/time: Remove read_boot_clock64()
timekeeping: Default boot time offset to local_clock()
timekeeping: Replace read_boot_clock64() with read_persistent_wall_and_boot_offset()
s390/time: Add read_persistent_wall_and_boot_offset()
x86/xen/time: Output xen sched_clock time from 0
x86/xen/time: Initialize pv xen time in init_hypervisor_platform()
...
|
|
Pull x86 PTI updates from Thomas Gleixner:
"The Speck brigade sadly provides yet another large set of patches
destroying the perfomance which we carefully built and preserved
- PTI support for 32bit PAE. The missing counter part to the 64bit
PTI code implemented by Joerg.
- A set of fixes for the Global Bit mechanics for non PCID CPUs which
were setting the Global Bit too widely and therefore possibly
exposing interesting memory needlessly.
- Protection against userspace-userspace SpectreRSB
- Support for the upcoming Enhanced IBRS mode, which is preferred
over IBRS. Unfortunately we dont know the performance impact of
this, but it's expected to be less horrible than the IBRS
hammering.
- Cleanups and simplifications"
* 'x86/pti' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
x86/mm/pti: Move user W+X check into pti_finalize()
x86/relocs: Add __end_rodata_aligned to S_REL
x86/mm/pti: Clone kernel-image on PTE level for 32 bit
x86/mm/pti: Don't clear permissions in pti_clone_pmd()
x86/mm/pti: Fix 32 bit PCID check
x86/mm/init: Remove freed kernel image areas from alias mapping
x86/mm/init: Add helper for freeing kernel image pages
x86/mm/init: Pass unconverted symbol addresses to free_init_pages()
mm: Allow non-direct-map arguments to free_reserved_area()
x86/mm/pti: Clear Global bit more aggressively
x86/speculation: Support Enhanced IBRS on future CPUs
x86/speculation: Protect against userspace-userspace spectreRSB
x86/kexec: Allocate 8k PGDs for PTI
Revert "perf/core: Make sure the ring-buffer is mapped in all page-tables"
x86/mm: Remove in_nmi() warning from vmalloc_fault()
x86/entry/32: Check for VM86 mode in slow-path check
perf/core: Make sure the ring-buffer is mapped in all page-tables
x86/pti: Check the return value of pti_user_pagetable_walk_pmd()
x86/pti: Check the return value of pti_user_pagetable_walk_p4d()
x86/entry/32: Add debug code to check entry/exit CR3
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vdso update from Thomas Gleixner:
"Use LD to link the VDSO libs instead of indirecting trough CC which
causes build failures with Clang"
* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: vdso: Use $LD instead of $CC to link
|
|
This property is not set by anyone since commit 104daea149c4 ("kconfig:
reference environment variables directly and remove 'option env='").
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Provide a declaration for native_save_fl() which unbreaks the
wreckage caused by making it 'extern inline'.
- Fix the failing paravirt patching which is supposed to replace
indirect with direct calls. The wreckage is caused by an incorrect
clobber test"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/paravirt: Fix spectre-v2 mitigations for paravirt guests
x86/irqflags: Provide a declaration for native_save_fl
|
|
This function is unused since commit 104daea149c4 ("kconfig: reference
environment variables directly and remove 'option env='").
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
|
|
If coccicheck fails, it should return an error code distinct from zero
to signal about an internal problem. Current code instead of exiting with
the tool's error code returns the error code of 'echo "coccicheck failed"'
which is almost always equals to zero, thus failing the original intention
of alerting about a problem. This patch fixes the code.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <[email protected]>
Acked-by: Julia Lawall <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Ensure that the cited expression is not a function call or an
assignment to reduce the chance of false positives.
Slightly modify the warning message to indicate another source
of false positves.
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Thomas Gleixner:
- Make lazy TLB mode even lazier to avoid pointless switch_mm()
operations, which reduces CPU load by 1-2% for memcache workloads
- Small cleanups and improvements all over the place
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove redundant check for kmem_cache_create()
arm/asm/tlb.h: Fix build error implicit func declaration
x86/mm/tlb: Make clear_asid_other() static
x86/mm/tlb: Skip atomic operations for 'init_mm' in switch_mm_irqs_off()
x86/mm/tlb: Always use lazy TLB mode
x86/mm/tlb: Only send page table free TLB flush to lazy TLB CPUs
x86/mm/tlb: Make lazy TLB mode lazier
x86/mm/tlb: Restructure switch_mm_irqs_off()
x86/mm/tlb: Leave lazy TLB mode at page table free time
mm: Allocate the mm_cpumask (mm->cpu_bitmap[]) dynamically based on nr_cpu_ids
x86/mm: Add TLB purge to free pmd/pte page interfaces
ioremap: Update pgtable free interfaces with addr
x86/mm: Disable ioremap free page handling on x86-PAE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Thomas Gleixner:
"Trivial cleanups and improvements"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/UV: Remove redundant check of p == q
x86/platform/olpc: Use PTR_ERR_OR_ZERO()
x86/platform/UV: Mark memblock related init code and data correctly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5e-updates-2018-08-10
This series provides the following updates to mlx5e netdevice driver.
1) First 4 patches extends the support for ethtool rxnfc flow steering
- Added ipv6 support
- l4 proto ip field for both ip6 and ip4
2) Next 4 patches, reorganizing flow steering structures and declaration into
one header file, and add two Kconfig flags to allow disabling/enabling mlx5
netdevice rx flow steering at compile time:
CONFIG_MLX5_EN_ARFS for en_arfs.c
CONFIG_MLX5_EN_RXNFC for en_fs_ehtool.c
3) More kconfig flags dependencies
- vxlan.c depends on CONFIG_VXLAN
- clock.c depends on CONFIG_PTP_1588_CLOCK
4) Reorganize the Makefile
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cache QoS (RDT/CAR) updates from Thomas Gleixner:
"Add support for pseudo-locked cache regions.
Cache Allocation Technology (CAT) allows on certain CPUs to isolate a
region of cache and 'lock' it. Cache pseudo-locking builds on the fact
that a CPU can still read and write data pre-allocated outside its
current allocated area on cache hit. With cache pseudo-locking data
can be preloaded into a reserved portion of cache that no application
can fill, and from that point on will only serve cache hits. The cache
pseudo-locked memory is made accessible to user space where an
application can map it into its virtual address space and thus have a
region of memory with reduced average read latency.
The locking is not perfect and gets totally screwed by WBINDV and
similar mechanisms, but it provides a reasonable enhancement for
certain types of latency sensitive applications.
The implementation extends the current CAT mechanism and provides a
generally useful exclusive CAT mode on which it builds the extra
pseude-locked regions"
* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
x86/intel_rdt: Disable PMU access
x86/intel_rdt: Fix possible circular lock dependency
x86/intel_rdt: Make CPU information accessible for pseudo-locked regions
x86/intel_rdt: Support restoration of subset of permissions
x86/intel_rdt: Fix cleanup of plr structure on error
x86/intel_rdt: Move pseudo_lock_region_clear()
x86/intel_rdt: Limit C-states dynamically when pseudo-locking active
x86/intel_rdt: Support L3 cache performance event of Broadwell
x86/intel_rdt: More precise L2 hit/miss measurements
x86/intel_rdt: Create character device exposing pseudo-locked region
x86/intel_rdt: Create debugfs files for pseudo-locking testing
x86/intel_rdt: Create resctrl debug area
x86/intel_rdt: Ensure RDT cleanup on exit
x86/intel_rdt: Resctrl files reflect pseudo-locked information
x86/intel_rdt: Support creation/removal of pseudo-locked region
x86/intel_rdt: Pseudo-lock region creation/removal core
x86/intel_rdt: Discover supported platforms via prefetch disable bits
x86/intel_rdt: Add utilities to test pseudo-locked region possibility
x86/intel_rdt: Split resource group removal in two
x86/intel_rdt: Enable entering of pseudo-locksetup mode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/hyper-v update from Thomas Gleixner:
"Add fast hypercall support for guest running on the Microsoft HyperV(isor)"
* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyper-v: Fix wrong merge conflict resolution
x86/hyper-v: Check for VP_INVAL in hyperv_flush_tlb_others()
x86/hyper-v: Check cpumask_to_vpset() return value in hyperv_flush_tlb_others_ex()
x86/hyper-v: Trace PV IPI send
x86/hyper-v: Use cheaper HVCALL_SEND_IPI hypercall when possible
x86/hyper-v: Use 'fast' hypercall for HVCALL_SEND_IPI
x86/hyper-v: Implement hv_do_fast_hypercall16
x86/hyper-v: Use cheaper HVCALL_FLUSH_VIRTUAL_ADDRESS_{LIST,SPACE} hypercalls when possible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 dump printing cleanup from Thomas Gleixner:
"Clean up the show_opcodes() printout so nested dumps can be properly
differentiated"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Avoid pr_cont() in show_opcodes()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Thomas Gleixner:
"Two small updates for the CPU code:
- Improve NUMA emulation
- Add the EPT_AD CPU feature bit"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeatures: Add EPT_AD feature bit
x86/numa_emulation: Introduce uniform split capability
x86/numa_emulation: Fix emulated-to-physical node mapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Thomas Gleixner:
"Trival cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/iommu: Use NULL instead of 0
x86/platform/pcspeaker: Use PTR_ERR_OR_ZERO() to fix ptr_ret.cocci warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 build cleanup from Thomas Gleixner:
"Remove a stale quirk for a no longer supported GCC version"
* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Remove old -funit-at-a-time GCC quirk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Thomas Gleixner:
"The lowlevel and ASM code updates for x86:
- Make stack trace unwinding more reliable
- ASM instruction updates for better code generation
- Various cleanups"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Add two more instruction suffixes
x86/asm/64: Use 32-bit XOR to zero registers
x86/build/vdso: Simplify 'cmd_vdso2c'
x86/build/vdso: Remove unused vdso-syms.lds
x86/stacktrace: Enable HAVE_RELIABLE_STACKTRACE for the ORC unwinder
x86/unwind/orc: Detect the end of the stack
x86/stacktrace: Do not fail for ORC with regs on stack
x86/stacktrace: Clarify the reliable success paths
x86/stacktrace: Remove STACKTRACE_DUMP_ONCE
x86/stacktrace: Do not unwind after user regs
x86/asm: Use CC_SET/CC_OUT in percpu_cmpxchg8b_double() to micro-optimize code generation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Thomas Gleixner:
"Boot code updates for x86:
- Allow to skip a given amount of huge pages for address layout
randomization on the kernel command line to prevent regressions in
the huge page allocation with small memory sizes
- Various cleanups"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Use CC_SET()/CC_OUT() instead of open coding it
x86/boot/KASLR: Make local variable mem_limit static
x86/boot/KASLR: Skip specified number of 1GB huge pages when doing physical randomization (KASLR)
x86/boot/KASLR: Add two new functions for 1GB huge pages handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic update from Thomas Gleixner:
"Trivial cleanups of the APIC related code"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Trivial coding style fixes
x86/vector: Merge allocate_vector() into assign_vector_locked()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timers departement more or less proudly presents:
- More Y2038 timekeeping work mostly in the core code. The work is
slowly, but steadily targeting the actuall syscalls.
- Enhanced timekeeping suspend/resume support by utilizing
clocksources which do not stop during suspend, but are otherwise
not the main timekeeping clocksources.
- Make NTP adjustmets more accurate and immediate when the frequency
is set directly and not incrementally.
- Sanitize the overrung handing of posix timers
- A new timer driver for Mediatek SoCs
- The usual pile of fixes and updates all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
clockevents: Warn if cpu_all_mask is used as cpumask
tick/broadcast-hrtimer: Use cpu_possible_mask for ce_broadcast_hrtimer
clocksource/drivers/arm_arch_timer: Fix bogus cpu_all_mask usage
clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flag
timers: Clear timer_base::must_forward_clk with timer_base::lock held
clocksource/drivers/sprd: Register one always-on timer to compensate suspend time
clocksource/drivers/timer-mediatek: Add support for system timer
clocksource/drivers/timer-mediatek: Convert the driver to timer-of
clocksource/drivers/timer-mediatek: Use specific prefix for GPT
clocksource/drivers/timer-mediatek: Rename mtk_timer to timer-mediatek
clocksource/drivers/timer-mediatek: Add system timer bindings
clocksource/drivers: Set clockevent device cpumask to cpu_possible_mask
time: Introduce one suspend clocksource to compensate the suspend time
time: Fix extra sleeptime injection when suspend fails
timekeeping/ntp: Constify some function arguments
ntp: Use kstrtos64 for s64 variable
ntp: Remove redundant arguments
timer: Fix coding style
ktime: Provide typesafe ktime_to_ns()
hrtimer: Improve kernel message printing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf update from Thomas Gleixner:
"The perf crowd presents:
Kernel updates:
- Removal of jprobes
- Cleanup and consolidatation the handling of kprobes
- Cleanup and consolidation of hardware breakpoints
- The usual pile of fixes and updates to PMUs and event descriptors
Tooling updates:
- Updates and improvements all over the place. Nothing outstanding,
just the (good) boring incremental grump work"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
perf trace: Do not require --no-syscalls to suppress strace like output
perf bpf: Include uapi/linux/bpf.h from the 'perf trace' script's bpf.h
perf tools: Allow overriding MAX_NR_CPUS at compile time
perf bpf: Show better message when failing to load an object
perf list: Unify metric group description format with PMU event description
perf vendor events arm64: Update ThunderX2 implementation defined pmu core events
perf cs-etm: Generate branch sample for CS_ETM_TRACE_ON packet
perf cs-etm: Generate branch sample when receiving a CS_ETM_TRACE_ON packet
perf cs-etm: Support dummy address value for CS_ETM_TRACE_ON packet
perf cs-etm: Fix start tracing packet handling
perf build: Fix installation directory for eBPF
perf c2c report: Fix crash for empty browser
perf tests: Fix indexing when invoking subtests
perf trace: Beautify the AF_INET & AF_INET6 'socket' syscall 'protocol' args
perf trace beauty: Add beautifiers for 'socket''s 'protocol' arg
perf trace beauty: Do not print NULL strarray entries
perf beauty: Add a generator for IPPROTO_ socket's protocol constants
tools include uapi: Grab a copy of linux/in.h
perf tests: Fix complex event name parsing
perf evlist: Fix error out while applying initial delay and LBR
...
|
|
The last argument to mlx5_add_flow_rules passes the number of
destinations in the struct pointed to by the dest arg. Change the name
to better reflect this fact.
Signed-off-by: Eli Cohen <[email protected]>
Reviewed-by: Or Gerlitz <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Reorganize the Makefile and group files together according to their
functionality and importance.
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
lib/clock.c includes clock related functions which require ptp support.
Thus compile out lib/clock.c and add the needed function stubs in case
kconfig CONFIG_PTP_1588_CLOCK is off.
Signed-off-by: Moshe Shemesh <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
When vxlan is not enabled by kernel, no need to enable it in mlx5.
Compile out lib/vxlan.c if CONFIG_VXLAN is not selected.
Signed-off-by: Saeed Mahameed <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Reviewed-by: Eran Ben Elisha <[email protected]>
|
|
Move flow steering declarations and definitions into the dedicated
en/fs.h header file
Signed-off-by: Saeed Mahameed <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
|
|
Add new mlx5 Kconfig flag to allow selecting accelerated flow steering
support, and compile out en_arfs.c if not selected.
Move arfs declarations and definitions to en/fs.h header file.
Signed-off-by: Saeed Mahameed <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
|
|
Add new mlx5 Kconfig flag to allow selecting ethtool rx nfc support,
and compile out en_fs_ehtool.c if not selected.
Add en/fs.h header file to host all steering declarations and
definitions.
Signed-off-by: Saeed Mahameed <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
|
|
Move ethool rxnfc callback into en_fs_etthool file where they belong.
This will allow us to make many ethtool fs related helper functions
static.
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add support for l4 proto ip field in ethtool flow steering.
Example: Redirect icmpv6 to rx queue #2
ethtool -U eth0 flow-type ip6 l4proto 58 action 2
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add ip6 support for ethtool flow steering.
New supported flow types: ip6|tcp6|udp6|
Supported fields: src-ip|dst-ip|src-port|dst-port
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking/atomics update from Thomas Gleixner:
"The locking, atomics and memory model brains delivered:
- A larger update to the atomics code which reworks the ordering
barriers, consolidates the atomic primitives, provides the new
atomic64_fetch_add_unless() primitive and cleans up the include
hell.
- Simplify cmpxchg() instrumentation and add instrumentation for
xchg() and cmpxchg_double().
- Updates to the memory model and documentation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
locking/atomics: Rework ordering barriers
locking/atomics: Instrument cmpxchg_double*()
locking/atomics: Instrument xchg()
locking/atomics: Simplify cmpxchg() instrumentation
locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation
tools/memory-model: Rename litmus tests to comply to norm7
tools/memory-model/Documentation: Fix typo, smb->smp
sched/Documentation: Update wake_up() & co. memory-barrier guarantees
locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
sched/core: Use smp_mb() in wake_woken_function()
tools/memory-model: Add informal LKMM documentation to MAINTAINERS
locking/atomics/Documentation: Describe atomic_set() as a write operation
tools/memory-model: Make scripts executable
tools/memory-model: Remove ACCESS_ONCE() from model
tools/memory-model: Remove ACCESS_ONCE() from recipes
locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example
MAINTAINERS: Add Daniel Lustig as an LKMM reviewer
tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name
tools/memory-model: Add litmus test for full multicopy atomicity
locking/refcount: Always allow checked forms
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug update from Thomas Gleixner:
"A trivial name fix for the hotplug state machine"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Clarify CPU hotplug step name for timers
|
|
Have a parsing function per flow type, that converts from ethtool rx flow
spec to mlx5 flow spec.
Will be useful to add support for ip6 ethtool flow steering in the
next patch.
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Have a ethtool rx flow spec validation helper function per flow type.
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Lockdep reports deadlock for following locking scenario in ife action:
Task one:
1) Executes ife action update.
2) Takes tcfa_lock.
3) Waits on ife_mod_lock which is already taken by task two.
Task two:
1) Executes any path that obtains ife_mod_lock without disabling bh (any
path that takes ife_mod_lock while holding tcfa_lock has bh disabled) like
loading a meta module, or creating new action.
2) Takes ife_mod_lock.
3) Task is preempted by rate estimator timer.
4) Timer callback waits on tcfa_lock which is taken by task one.
In described case tasks deadlock because they take same two locks in
different order. To prevent potential deadlock reported by lockdep, always
disable bh when obtaining ife_mod_lock.
Lockdep warning:
[ 508.101192] =====================================================
[ 508.107708] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
[ 508.114728] 4.18.0-rc8+ #646 Not tainted
[ 508.119050] -----------------------------------------------------
[ 508.125559] tc/5460 [HC0[0]:SC0[2]:HE1:SE0] is trying to acquire:
[ 508.132025] 000000005a938c68 (ife_mod_lock){++++}, at: find_ife_oplist+0x1e/0xc0 [act_ife]
[ 508.140996]
and this task is already holding:
[ 508.147548] 00000000d46f6c56 (&(&p->tcfa_lock)->rlock){+.-.}, at: tcf_ife_init+0x6ae/0xf40 [act_ife]
[ 508.157371] which would create a new lock dependency:
[ 508.162828] (&(&p->tcfa_lock)->rlock){+.-.} -> (ife_mod_lock){++++}
[ 508.169572]
but this new dependency connects a SOFTIRQ-irq-safe lock:
[ 508.178197] (&(&p->tcfa_lock)->rlock){+.-.}
[ 508.178201]
... which became SOFTIRQ-irq-safe at:
[ 508.189771] _raw_spin_lock+0x2c/0x40
[ 508.193906] est_fetch_counters+0x41/0xb0
[ 508.198391] est_timer+0x83/0x3c0
[ 508.202180] call_timer_fn+0x16a/0x5d0
[ 508.206400] run_timer_softirq+0x399/0x920
[ 508.210967] __do_softirq+0x157/0x97d
[ 508.215102] irq_exit+0x152/0x1c0
[ 508.218888] smp_apic_timer_interrupt+0xc0/0x4e0
[ 508.223976] apic_timer_interrupt+0xf/0x20
[ 508.228540] cpuidle_enter_state+0xf8/0x5d0
[ 508.233198] do_idle+0x28a/0x350
[ 508.236881] cpu_startup_entry+0xc7/0xe0
[ 508.241296] start_secondary+0x2e8/0x3f0
[ 508.245678] secondary_startup_64+0xa5/0xb0
[ 508.250347]
to a SOFTIRQ-irq-unsafe lock: (ife_mod_lock){++++}
[ 508.256531]
... which became SOFTIRQ-irq-unsafe at:
[ 508.267279] ...
[ 508.267283] _raw_write_lock+0x2c/0x40
[ 508.273653] register_ife_op+0x118/0x2c0 [act_ife]
[ 508.278926] do_one_initcall+0xf7/0x4d9
[ 508.283214] do_init_module+0x18b/0x44e
[ 508.287521] load_module+0x4167/0x5730
[ 508.291739] __do_sys_finit_module+0x16d/0x1a0
[ 508.296654] do_syscall_64+0x7a/0x3f0
[ 508.300788] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 508.306302]
other info that might help us debug this:
[ 508.315286] Possible interrupt unsafe locking scenario:
[ 508.322771] CPU0 CPU1
[ 508.327681] ---- ----
[ 508.332604] lock(ife_mod_lock);
[ 508.336300] local_irq_disable();
[ 508.342608] lock(&(&p->tcfa_lock)->rlock);
[ 508.349793] lock(ife_mod_lock);
[ 508.355990] <Interrupt>
[ 508.358974] lock(&(&p->tcfa_lock)->rlock);
[ 508.363803]
*** DEADLOCK ***
[ 508.370715] 2 locks held by tc/5460:
[ 508.374680] #0: 00000000e27e4fa4 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x583/0x7b0
[ 508.383366] #1: 00000000d46f6c56 (&(&p->tcfa_lock)->rlock){+.-.}, at: tcf_ife_init+0x6ae/0xf40 [act_ife]
[ 508.393648]
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
[ 508.403505] -> (&(&p->tcfa_lock)->rlock){+.-.} ops: 1001553 {
[ 508.409646] HARDIRQ-ON-W at:
[ 508.413136] _raw_spin_lock_bh+0x34/0x40
[ 508.419059] gnet_stats_start_copy_compat+0xa2/0x230
[ 508.426021] gnet_stats_start_copy+0x16/0x20
[ 508.432333] tcf_action_copy_stats+0x95/0x1d0
[ 508.438735] tcf_action_dump_1+0xb0/0x4e0
[ 508.444795] tcf_action_dump+0xca/0x200
[ 508.450673] tcf_exts_dump+0xd9/0x320
[ 508.456392] fl_dump+0x1b7/0x4a0 [cls_flower]
[ 508.462798] tcf_fill_node+0x380/0x530
[ 508.468601] tfilter_notify+0xdf/0x1c0
[ 508.474404] tc_new_tfilter+0x84a/0xc90
[ 508.480270] rtnetlink_rcv_msg+0x5bd/0x7b0
[ 508.486419] netlink_rcv_skb+0x184/0x220
[ 508.492394] netlink_unicast+0x31b/0x460
[ 508.507411] netlink_sendmsg+0x3fb/0x840
[ 508.513390] sock_sendmsg+0x7b/0xd0
[ 508.518907] ___sys_sendmsg+0x4c6/0x610
[ 508.524797] __sys_sendmsg+0xd7/0x150
[ 508.530510] do_syscall_64+0x7a/0x3f0
[ 508.536201] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 508.543301] IN-SOFTIRQ-W at:
[ 508.546834] _raw_spin_lock+0x2c/0x40
[ 508.552522] est_fetch_counters+0x41/0xb0
[ 508.558571] est_timer+0x83/0x3c0
[ 508.563912] call_timer_fn+0x16a/0x5d0
[ 508.569699] run_timer_softirq+0x399/0x920
[ 508.575840] __do_softirq+0x157/0x97d
[ 508.581538] irq_exit+0x152/0x1c0
[ 508.586882] smp_apic_timer_interrupt+0xc0/0x4e0
[ 508.593533] apic_timer_interrupt+0xf/0x20
[ 508.599686] cpuidle_enter_state+0xf8/0x5d0
[ 508.605895] do_idle+0x28a/0x350
[ 508.611147] cpu_startup_entry+0xc7/0xe0
[ 508.617097] start_secondary+0x2e8/0x3f0
[ 508.623029] secondary_startup_64+0xa5/0xb0
[ 508.629245] INITIAL USE at:
[ 508.632686] _raw_spin_lock_bh+0x34/0x40
[ 508.638557] gnet_stats_start_copy_compat+0xa2/0x230
[ 508.645491] gnet_stats_start_copy+0x16/0x20
[ 508.651719] tcf_action_copy_stats+0x95/0x1d0
[ 508.657992] tcf_action_dump_1+0xb0/0x4e0
[ 508.663937] tcf_action_dump+0xca/0x200
[ 508.669716] tcf_exts_dump+0xd9/0x320
[ 508.675337] fl_dump+0x1b7/0x4a0 [cls_flower]
[ 508.681650] tcf_fill_node+0x380/0x530
[ 508.687366] tfilter_notify+0xdf/0x1c0
[ 508.693031] tc_new_tfilter+0x84a/0xc90
[ 508.698820] rtnetlink_rcv_msg+0x5bd/0x7b0
[ 508.704869] netlink_rcv_skb+0x184/0x220
[ 508.710758] netlink_unicast+0x31b/0x460
[ 508.716627] netlink_sendmsg+0x3fb/0x840
[ 508.722510] sock_sendmsg+0x7b/0xd0
[ 508.727931] ___sys_sendmsg+0x4c6/0x610
[ 508.733729] __sys_sendmsg+0xd7/0x150
[ 508.739346] do_syscall_64 +0x7a/0x3f0
[ 508.744943] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 508.751930] }
[ 508.753964] ... key at: [<ffffffff916b3e20>] __key.61145+0x0/0x40
[ 508.760946] ... acquired at:
[ 508.764294] _raw_read_lock+0x2f/0x40
[ 508.768513] find_ife_oplist+0x1e/0xc0 [act_ife]
[ 508.773692] tcf_ife_init+0x82f/0xf40 [act_ife]
[ 508.778785] tcf_action_init_1+0x510/0x750
[ 508.783468] tcf_action_init+0x1e8/0x340
[ 508.787938] tcf_action_add+0xc5/0x240
[ 508.792241] tc_ctl_action+0x203/0x2a0
[ 508.796550] rtnetlink_rcv_msg+0x5bd/0x7b0
[ 508.801200] netlink_rcv_skb+0x184/0x220
[ 508.805674] netlink_unicast+0x31b/0x460
[ 508.810129] netlink_sendmsg+0x3fb/0x840
[ 508.814611] sock_sendmsg+0x7b/0xd0
[ 508.818665] ___sys_sendmsg+0x4c6/0x610
[ 508.823029] __sys_sendmsg+0xd7/0x150
[ 508.827246] do_syscall_64+0x7a/0x3f0
[ 508.831483] entry_SYSCALL_64_after_hwframe+0x49/0xbe
the dependencies between the lock to be acquired
[ 508.838945] and SOFTIRQ-irq-unsafe lock:
[ 508.851177] -> (ife_mod_lock){++++} ops: 95 {
[ 508.855920] HARDIRQ-ON-W at:
[ 508.859478] _raw_write_lock+0x2c/0x40
[ 508.865264] register_ife_op+0x118/0x2c0 [act_ife]
[ 508.872071] do_one_initcall+0xf7/0x4d9
[ 508.877947] do_init_module+0x18b/0x44e
[ 508.883819] load_module+0x4167/0x5730
[ 508.889595] __do_sys_finit_module+0x16d/0x1a0
[ 508.896043] do_syscall_64+0x7a/0x3f0
[ 508.901734] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 508.908827] HARDIRQ-ON-R at:
[ 508.912359] _raw_read_lock+0x2f/0x40
[ 508.918043] find_ife_oplist+0x1e/0xc0 [act_ife]
[ 508.924692] tcf_ife_init+0x82f/0xf40 [act_ife]
[ 508.931252] tcf_action_init_1+0x510/0x750
[ 508.937393] tcf_action_init+0x1e8/0x340
[ 508.943366] tcf_action_add+0xc5/0x240
[ 508.949130] tc_ctl_action+0x203/0x2a0
[ 508.954922] rtnetlink_rcv_msg+0x5bd/0x7b0
[ 508.961024] netlink_rcv_skb+0x184/0x220
[ 508.966970] netlink_unicast+0x31b/0x460
[ 508.972915] netlink_sendmsg+0x3fb/0x840
[ 508.978859] sock_sendmsg+0x7b/0xd0
[ 508.984400] ___sys_sendmsg+0x4c6/0x610
[ 508.990264] __sys_sendmsg+0xd7/0x150
[ 508.995952] do_syscall_64+0x7a/0x3f0
[ 509.001643] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 509.008722] SOFTIRQ-ON-W at:\
[ 509.012242] _raw_write_lock+0x2c/0x40
[ 509.018013] register_ife_op+0x118/0x2c0 [act_ife]
[ 509.024841] do_one_initcall+0xf7/0x4d9
[ 509.030720] do_init_module+0x18b/0x44e
[ 509.036604] load_module+0x4167/0x5730
[ 509.042397] __do_sys_finit_module+0x16d/0x1a0
[ 509.048865] do_syscall_64+0x7a/0x3f0
[ 509.054551] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 509.061636] SOFTIRQ-ON-R at:
[ 509.065145] _raw_read_lock+0x2f/0x40
[ 509.070854] find_ife_oplist+0x1e/0xc0 [act_ife]
[ 509.077515] tcf_ife_init+0x82f/0xf40 [act_ife]
[ 509.084051] tcf_action_init_1+0x510/0x750
[ 509.090172] tcf_action_init+0x1e8/0x340
[ 509.096124] tcf_action_add+0xc5/0x240
[ 509.101891] tc_ctl_action+0x203/0x2a0
[ 509.107671] rtnetlink_rcv_msg+0x5bd/0x7b0
[ 509.113811] netlink_rcv_skb+0x184/0x220
[ 509.119768] netlink_unicast+0x31b/0x460
[ 509.125716] netlink_sendmsg+0x3fb/0x840
[ 509.131668] sock_sendmsg+0x7b/0xd0
[ 509.137167] ___sys_sendmsg+0x4c6/0x610
[ 509.143010] __sys_sendmsg+0xd7/0x150
[ 509.148718] do_syscall_64+0x7a/0x3f0
[ 509.154443] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 509.161533] INITIAL USE at:
[ 509.164956] _raw_read_lock+0x2f/0x40
[ 509.170574] find_ife_oplist+0x1e/0xc0 [act_ife]
[ 509.177134] tcf_ife_init+0x82f/0xf40 [act_ife]
[ 509.183619] tcf_action_init_1+0x510/0x750
[ 509.189674] tcf_action_init+0x1e8/0x340
[ 509.195534] tcf_action_add+0xc5/0x240
[ 509.201229] tc_ctl_action+0x203/0x2a0
[ 509.206920] rtnetlink_rcv_msg+0x5bd/0x7b0
[ 509.212936] netlink_rcv_skb+0x184/0x220
[ 509.218818] netlink_unicast+0x31b/0x460
[ 509.224699] netlink_sendmsg+0x3fb/0x840
[ 509.230581] sock_sendmsg+0x7b/0xd0
[ 509.235984] ___sys_sendmsg+0x4c6/0x610
[ 509.241791] __sys_sendmsg+0xd7/0x150
[ 509.247425] do_syscall_64+0x7a/0x3f0
[ 509.253007] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 509.259975] }
[ 509.261998] ... key at: [<ffffffffc1554258>] ife_mod_lock+0x18/0xffffffffffff8dc0 [act_ife]
[ 509.271569] ... acquired at:
[ 509.274912] _raw_read_lock+0x2f/0x40
[ 509.279134] find_ife_oplist+0x1e/0xc0 [act_ife]
[ 509.284324] tcf_ife_init+0x82f/0xf40 [act_ife]
[ 509.289425] tcf_action_init_1+0x510/0x750
[ 509.294068] tcf_action_init+0x1e8/0x340
[ 509.298553] tcf_action_add+0xc5/0x240
[ 509.302854] tc_ctl_action+0x203/0x2a0
[ 509.307153] rtnetlink_rcv_msg+0x5bd/0x7b0
[ 509.311805] netlink_rcv_skb+0x184/0x220
[ 509.316282] netlink_unicast+0x31b/0x460
[ 509.320769] netlink_sendmsg+0x3fb/0x840
[ 509.325248] sock_sendmsg+0x7b/0xd0
[ 509.329290] ___sys_sendmsg+0x4c6/0x610
[ 509.333687] __sys_sendmsg+0xd7/0x150
[ 509.337902] do_syscall_64+0x7a/0x3f0
[ 509.342116] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 509.349601]
stack backtrace:
[ 509.354663] CPU: 6 PID: 5460 Comm: tc Not tainted 4.18.0-rc8+ #646
[ 509.361216] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017
Fixes: ef6980b6becb ("introduce IFE action")
Signed-off-by: Vlad Buslov <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Johan Hedberg says:
====================
pull request: bluetooth-next 2018-08-13
There was one pretty bad bug that slipped into the MediaTek HCI driver
in the last bluetooth-next pull request. Would it be possible to get
this one-liner fix pulled to net-next before you make your first 4.19
pull request for Linus? Thanks.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Thomas Gleixner:
- Cleanup and improvement of NUMA balancing
- Refactoring and improvements to the PELT (Per Entity Load Tracking)
code
- Watchdog simplification and related cleanups
- The usual pile of small incremental fixes and improvements
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
watchdog: Reduce message verbosity
stop_machine: Reflow cpu_stop_queue_two_works()
sched/numa: Move task_numa_placement() closer to numa_migrate_preferred()
sched/numa: Use group_weights to identify if migration degrades locality
sched/numa: Update the scan period without holding the numa_group lock
sched/numa: Remove numa_has_capacity()
sched/numa: Modify migrate_swap() to accept additional parameters
sched/numa: Remove unused task_capacity from 'struct numa_stats'
sched/numa: Skip nodes that are at 'hoplimit'
sched/debug: Reverse the order of printing faults
sched/numa: Use task faults only if numa_group is not yet set up
sched/numa: Set preferred_node based on best_cpu
sched/numa: Simplify load_too_imbalanced()
sched/numa: Evaluate move once per node
sched/numa: Remove redundant field
sched/debug: Show the sum wait time of a task group
sched/fair: Remove #ifdefs from scale_rt_capacity()
sched/core: Remove get_cpu() from sched_fork()
sched/cpufreq: Clarify sugov_get_util()
sched/sysctl: Remove unused sched_time_avg_ms sysctl
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single bugfix to prevent a pinned thread which queues stomp machine
work to be preempted by the stopper thread on its CPU which causes a
live lock as it is unable to wake the second CPUs stopper thread"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
stop_machine: Atomically queue and wake stopper threads
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RAS updates from Thomas Gleixner:
"A small set of changes to the RAS core:
- Rework of the MCE bank scanning code
- Y2038 converion"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Cleanup __mc_scan_banks()
x86/mce: Carve out bank scanning code
x86/mce: Remove !banks check
x86/mce: Carve out the crashing_cpu check
x86/mce: Always use 64-bit timestamps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Thomas Gleixner:
"A large update to RCU:
Preparatory work for consolidating the RCU flavors:
- Introduce grace-period sequence numbers to the RCU-bh, RCU-preempt,
and RCU-sched flavors, replacing the old ->gpnum and ->completed
pair of fields.
This change allows lockless code to obtain the complete
grace-period state with a single READ_ONCE(), which is needed to
maintain tolerable lock contention during the upcoming
consolidation of the three RCU flavors.
Note that grace-period sequence numbers are already used by
rcu_barrier(), expedited RCU grace periods, and SRCU, and are thus
already heavily used and well-tested. Joel Fernandes contributed a
number of excellent fixes and improvements.
- Clean up some grace-period-reporting loose ends, including
improving the handling of quiescent states from offline CPUs and
fixing some false-positive WARN_ON_ONCE() invocations.
(Strictly speaking, the WARN_ON_ONCE() invocations were quite
correct, but their invariants were (harmlessly) violated by the
earlier sloppy handling of quiescent states from offline CPUs.)
In addition, improve grace-period forward-progress guarantees so as
to allow removal of fail-safe checks that required otherwise
needless lock acquisitions. Finally, add more diagnostics to help
debug the upcoming consolidation of the RCU-bh, RCU-preempt, and
RCU-sched flavors.
The rest:
- SRCU updates
- Updates to rcutorture and associated scripting.
- The usual pile of miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
rcutorture: Fix rcu_barrier successes counter
rcutorture: Add support to detect if boost kthread prio is too low
rcutorture: Use monotonic timestamp for stall detection
rcutorture: Make boost test more robust
rcutorture: Disable RT throttling for boost tests
rcutorture: Emphasize testing of single reader protection type
rcutorture: Handle extended read-side critical sections
rcutorture: Make rcu_torture_timer() use rcu_torture_one_read()
rcutorture: Use per-CPU random state for rcu_torture_timer()
rcutorture: Use atomic increment for n_rcu_torture_timers
rcutorture: Extract common code from rcu_torture_reader()
rcuperf: Remove unused torturing_tasks() function
rcu: Remove rcutorture test version and sequence number
rcutorture: Change units of onoff_interval to jiffies
rcu: Assign higher prio to RCU threads if rcutorture is built-in
rculist: Improve documentation for list_for_each_entry_from_rcu()
srcu: Add grace-period number to rcutorture statistics printout
rcu: Print stall-warning NMI dyntick state in hexadecimal
MAINTAINERS: Update RCU, SRCU, and TORTURE-TEST entries
rcu: Make rcu_seq_diff() more exact
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull genirq updates from Thomas Gleixner:
"The irq departement provides:
- A synchronization fix for free_irq() to synchronize just the
removed interrupt thread on shared interrupt lines.
- Consolidate the multi low level interrupt entry handling and mvoe
it to the generic code instead of adding yet another copy for
RISC-V
- Refactoring of the ARM LPI allocator and LPI exposure to the
hypervisor
- Yet another interrupt chip driver for the JZ4725B SoC
- Speed up for /proc/interrupts as people seem to love reading this
file with high frequency
- Miscellaneous fixes and updates"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
irqchip/gic-v3-its: Make its_lock a raw_spin_lock_t
genirq/irqchip: Remove MULTI_IRQ_HANDLER as it's now obselete
openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER
arm64: Use the new GENERIC_IRQ_MULTI_HANDLER
ARM: Convert to GENERIC_IRQ_MULTI_HANDLER
irqchip: Port the ARM IRQ drivers to GENERIC_IRQ_MULTI_HANDLER
irqchip/gic-v3-its: Reduce minimum LPI allocation to 1 for PCI devices
dt-bindings: irqchip: renesas-irqc: Document r8a77980 support
dt-bindings: irqchip: renesas-irqc: Document r8a77470 support
irqchip/ingenic: Add support for the JZ4725B SoC
irqchip/stm32: Add exti0 translation for stm32mp1
genirq: Remove redundant NULL pointer check in __free_irq()
irqchip/gic-v3-its: Honor hypervisor enforced LPI range
irqchip/gic-v3: Expose GICD_TYPER in the rdist structure
irqchip/gic-v3-its: Drop chunk allocation compatibility
irqchip/gic-v3-its: Move minimum LPI requirements to individual busses
irqchip/gic-v3-its: Use full range of LPIs
irqchip/gic-v3-its: Refactor LPI allocator
genirq: Synchronize only with single thread on free_irq()
genirq: Update code comments wrt recycled thread_mask
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Thomas Gleixner:
"The EFI pile:
- Make mixed mode UEFI runtime service invocations mutually
exclusive, as mandated by the UEFI spec
- Perform UEFI runtime services calls from a work queue so the calls
into the firmware occur from a kernel thread
- Honor the UEFI memory map attributes for live memory regions
configured by UEFI as a framebuffer. This works around a coherency
problem with KVM guests running on ARM.
- Cleanups, improvements and fixes all over the place"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efivars: Call guid_parse() against guid_t type of variable
efi/cper: Use consistent types for UUIDs
efi/x86: Replace references to efi_early->is64 with efi_is_64bit()
efi: Deduplicate efi_open_volume()
efi/x86: Add missing NULL initialization in UGA draw protocol discovery
efi/x86: Merge 32-bit and 64-bit UGA draw protocol setup routines
efi/x86: Align efi_uga_draw_protocol typedef names to convention
efi/x86: Merge the setup_efi_pci32() and setup_efi_pci64() routines
efi/x86: Prevent reentrant firmware calls in mixed mode
efi/esrt: Only call efi_mem_reserve() for boot services memory
fbdev/efifb: Honour UEFI memory map attributes when mapping the FB
efi: Drop type and attribute checks in efi_mem_desc_lookup()
efi/libstub/arm: Add opt-in Kconfig option for the DTB loader
efi: Remove the declaration of efi_late_init() as the function is unused
efi/cper: Avoid using get_seconds()
efi: Use a work queue to invoke EFI Runtime Services
efi/x86: Use non-blocking SetVariable() for efi_delete_dummy_variable()
efi/x86: Clean up the eboot code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects update from Thomas Gleixner:
"Two simple updates for the debug objects code:
- Make the stack check warning more informative by adding the object
and the stack page address to the printout
- Remove a redundant NULL pointer check"
* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Remove redundant NULL pointer check
debugobjects: Make stack check warning more informative
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-08-13
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add driver XDP support for veth. This can be used in conjunction with
redirect of another XDP program e.g. sitting on NIC so the xdp_frame
can be forwarded to the peer veth directly without modification,
from Toshiaki.
2) Add a new BPF map type REUSEPORT_SOCKARRAY and prog type SK_REUSEPORT
in order to provide more control and visibility on where a SO_REUSEPORT
sk should be located, and the latter enables to directly select a sk
from the bpf map. This also enables map-in-map for application migration
use cases, from Martin.
3) Add a new BPF helper bpf_skb_ancestor_cgroup_id() that returns the id
of cgroup v2 that is the ancestor of the cgroup associated with the
skb at the ancestor_level, from Andrey.
4) Implement BPF fs map pretty-print support based on BTF data for regular
hash table and LRU map, from Yonghong.
5) Decouple the ability to attach BTF for a map from the key and value
pretty-printer in BPF fs, and enable further support of BTF for maps for
percpu and LPM trie, from Daniel.
6) Implement a better BPF sample of using XDP's CPU redirect feature for
load balancing SKB processing to remote CPU. The sample implements the
same XDP load balancing as Suricata does which is symmetric hash based
on IP and L4 protocol, from Jesper.
7) Revert adding NULL pointer check with WARN_ON_ONCE() in __xdp_return()'s
critical path as it is ensured that the allocator is present, from Björn.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
pull-request: wireless-drivers-next 2018-08-12
wireless-drivers-next patches for 4.19
Last set of new features for 4.19. Most notable is simplifying SSB
debugging code with two Kconfig option removals and fixing mt76 USB
build problems.
Major changes:
ath10k
* add debugfs file warm_hw_reset
wil6210
* add debugfs files tx_latency, link_stats and link_stats_global
* add 3-MSI support
* allow scan on AP interface
* support max aggregation window size 64
ssb
* remove CONFIG_SSB_SILENT and CONFIG_SSB_DEBUG Kconfig options
mt76
* fix build problems with recently added USB support
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Enable mac_scsi PDMA on PowerBook 500
- Generic dma_noncoherent_ops conversion
- Time handling improvements
- I/O accessor improvements
- Conversion to MEMBLOCK and NO_BOOTMEM, to bring m68k in line with
other mainstream architectures
- Miscellaneous fixes and cleanups
- Defconfig updates
* tag 'm68k-for-v4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/defconfig: Update defconfigs for v4.18-rc6
m68k: switch to MEMBLOCK + NO_BOOTMEM
m68k/page_no.h: force __va argument to be unsigned long
m68k/bitops: convert __ffs to match generic declaration
m68k/io: Switch mmu variant to <asm-generic/io.h>
m68k/io: Move mem*io define guards to <asm/kmap.h>
Input: hilkbd - Add casts to HP9000/300 I/O accessors
net: mac8390: Use standard memcpy_{from,to}io()
m68k/io: Add missing ioremap define guards, fix typo
m68k: Remove unused set_clock_mmss() helpers
m68k: mac: Use time64_t in RTC handling
m68k: Use generic dma_noncoherent_ops
nubus: Set default dma mask for nubus_board devices
m68k/mac: Enable PDMA for PowerBook 500 series
|
|
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/cavium/liquidio/lio_ethtool.c: In function 'lio_set_link_ksettings':
drivers/net/ethernet/cavium/liquidio/lio_ethtool.c:392:6: warning:
variable 'is25G' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|