aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-01-05[S390] dasd: do path verification for paths added at runtimeStefan Weinhuber9-100/+418
When a new path is added at runtime, the CIO layer will call the drivers path_event callback. The DASD device driver uses this callback to trigger a path verification for the new path. The driver will use only those paths for I/O, which have been successfully verified. Signed-off-by: Stefan Weinhuber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] dasd: add High Performance FICON multitrack supportStefan Weinhuber3-46/+122
Some storage systems support multitrack High Performance FICON requests, which read or write data to more than one track. This patch enables the DASD device driver to generate multitrack High Performance FICON requests. Signed-off-by: Stefan Weinhuber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] cio: reduce memory consumption of itcw structuresStefan Weinhuber1-10/+52
Any list of indirect data adresses (TIDAL) used by a TCW must not cross a page boundary. The original itcw implementation complies with this restriction by allocating allmost twice as much memory as actually needed, so that in any case there is enough room for the full TIDAL, either above or below the page boundary. This patch implements an alternative method, by using a TTIC TIDAW to connect TIDAL parts below and above a page boundary. Signed-off-by: Stefan Weinhuber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] nmi: enable machine checks earlyHeiko Carstens1-0/+2
Until now machine checks for the swapper process of the IPL cpu are just implicitly (and more or less accidently) enabled when the first time the idle process goes into idle state and loads an enabled wait psw. Before that machine checks are disabled. So let's enable them explicitly in trap_init() so we have a well defined time when machine checks are enabled. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] qeth: buffer count imbalanceJan Glauber1-1/+1
The used buffers counter is not incremented in case of an error so the counter can become negative. Increment the used buffers counter before checking for errors. Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] css: update subchannel descriptorSebastian Ott1-0/+8
Update the subchannel descriptor if we receive a "Installed parameters modified" crw. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] 31 bit entry.S update.Martin Schwidefsky1-103/+109
Make the code in the 31 bit entry.S code as similar as possible to the 64 bit version in entry64.S. That makes it easier to add new code to the first level interrupt handler that affects both 31 and 64 bit kernels. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] cio: obtain mdc value per channel pathSebastian Ott4-0/+79
Add support to accumulate the number of 64K-bytes blocks all paths to a device at least support for a transport command. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] nohz: optimize arch_needs_cpu()Heiko Carstens1-1/+1
arch_needs_cpu() gets always executed on the current cpu. Therefore the cpu parameter can be ignored it is possible to use __get_cpu_var() instead of per_cpu() to access the per_cpu variable, which will generate better code. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] qdio: cleanup SIGA syncJan Glauber3-55/+44
Simplify the SIGA sync code and add unlikely annotations. In polling mode SBALs may be accessed without interrupt, so call SIGA sync before every scan. Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] qdio: remove enhanced SIGAJan Glauber2-44/+15
HiperSocket devices only use one SBAL per qdio call without the enhanced SIGA feature. Since that feature is currently not used remove it from the qdio code so the compiler can generate better code for the HiperSocket outbound path. While at it mark the SIGA error conditions as unlikely. Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] qdio: use proper QEBSM operand for SIGA-R and SIGA-SJan Glauber2-15/+34
If QIOASSIST is enabled for a qdio device the SIGA instruction requires a modified function code. This function code modifier was missing for SIGA-R and SIGA-S which can lead to a kernel panic caused by an operand exception. Cc: [email protected] Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] qdio: outbound queue full counterJan Glauber3-0/+5
Add a counter for outbound queue full events to the qdio statistics. Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] qdio: outbound tasklet scan thresholdJan Glauber6-1/+15
Introduce a scan treshold for the qdio outbound queues. By setting the threshold the driver can tell qdio after how much used SBALs qdio should schedule the outbound tasklet that scans the queue for finished SBALs. The threshold is specific by the drivers because a Hipersockets device is much faster in utilizing outbound buffers than a ZFCP or OSA device. The default values after how many used SBALs the tasklet should run are: OSA: > 31 SBALs Hipersockets: > 7 SBALs zfcp: > 55 SBALs Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] qdio: prevent race for shared indicatorsJan Glauber3-49/+13
If the shared indicator is used the following race leads to an inbound stall: Device CPU0 CPU1 ======================================================== non-shared DSCI =>1 ALSI => 1 Thin INT ALSI => 0 non-shared DSCI tasklets scheduled shared DSCI => 1 ALSI => 1 shared DSCI => 0 ALSI ? -> set Thin INT ALSI => 0 ALSI was set, shared DSCI => 1 After that no more interrupts occur because the DSCI is still set. Fix that race by only resetting the shared DSCI if it was actually set so the tasklets for all shared devices are scheduled and will run after the interrupt. Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] Handling of 4096 bit RSA keys in CRT format.Felix Beck1-2/+10
Also process 4096 bit RSA keys in CRT format. Handle them like the smaller keys and take care of the zero padding. Signed-off-by: Felix Beck <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] zcrypt: cope with cca restriction of cex3Felix Beck5-1/+21
The cca on the crypto adapter has a restriction in the size of the exponent if a key with a modulus bigger than 2048 bit is used. Thus in that case we have to avoid that the crypto device driver thinks the adapter is defect and sets it offline. Therfore a new member for the zcrypt_device struct called max_exp_bit_length is introduced. This will be set the first time the cca returns the error code function not implemented. If this is done with an adapter twice it will return -EINVAL. Signed-off-by: Felix Beck <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] zcrypt: support for 4096 bit keys for cex3cFelix Beck1-2/+2
Definitions for CEX3 card types are changed to support 4096 bit RSA keys in the coprocessor. Signed-off-by: Felix Beck <[email protected]> Signed-off-by: Ralph Wuerthner <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] zcrypt: support for 4096 bit keys for cex3aFelix Beck2-16/+87
Definitions for CEX3 card types are changed to support 4096 bit RSA keys. Also new structs for the accelerator mode are needed. Additionaly when checking the length of key parts, the case for bigger (4096 bit) keys is needed. Signed-off-by: Felix Beck <[email protected]> Signed-off-by: Ralph Wuerthner <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] zcrypt: Introduce check for 4096 bit support.Felix Beck2-0/+65
Implemented an asm in the ap bus and made it accessible for the card specific parts of the zcrypt driver. Thus when a cex3a is recognized a check can be performed to dermine whether the card supports 4096 bit RSA keys. Signed-off-by: Felix Beck <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] hypfs: Move buffer allocation from open to readMichael Holzheu6-118/+195
Currently the buffer for diagnose data is allocated in the open function of the debugfs file and is released in the close function. This has the drawback that a user (root) can pin that memory by not closing the file. This patch moves the buffer allocation to the read function. The buffer is automatically released after the buffer is copied to userspace. Signed-off-by: Michael Holzheu <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] current_thread_info optimizationMartin Schwidefsky1-1/+1
Use thread_info lowcore field for current_thread_info(), saves an unnecessary calculation. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] extint: get rid of early code plus cleanupHeiko Carstens2-103/+51
Get rid of register/unregister_early_external_interrupt() and clean up the code while at it. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] sclp: use register_external_interrupt()Heiko Carstens1-9/+3
Use register_external_interrupt() instead of register_early_external_interrupt(). The early variant is not necessary since kmalloc works already. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] pfault: delay register of pfault interruptHeiko Carstens3-15/+15
Use an early init call to initialize pfault. That way it is possible to use the register_external_interrupt() instead of the early variant. No need to enable pfault any earlier since it has only effect if user space processes are running. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] ap bus: add support for irq statisticsHolger Dengler3-0/+4
Add support for AP Bus I/O interrupt statistics in /proc/interrupts. Signed-off-by: Holger Dengler <[email protected]> Signed-off-by: Felix Beck <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] ctc: add support for irq statisticsHeiko Carstens3-0/+4
Add support for CTC I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] claw: add support for irq statisticsHeiko Carstens3-0/+4
Add support for CLAW I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] lcs: add support for irq statisticsHeiko Carstens3-0/+4
Add support for LCS I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] vmur: add support for irq statisticsHeiko Carstens3-0/+4
Add support for VMUR I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] tape: add support for irq statisticsHeiko Carstens3-0/+4
Add support for ccw based tape I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] 3270: add support for irq statisticsHeiko Carstens3-0/+4
Add support for 3270 I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] 3215: add support for irq statisticsHeiko Carstens3-0/+4
Add support for 3215 I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] dasd: add support for irq statisticsHeiko Carstens3-0/+4
Add support for DASD I/O interrupt statistics in /proc/interrupts. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] qdio: add qdio interrupts to interrupt statisticsJan Glauber4-0/+8
Count traditional qdio interrupts and adapter interrupts for qdio in the interrupt statistics. Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] irq: have detailed statistics for interrupt typesHeiko Carstens11-20/+56
Up to now /proc/interrupts only has statistics for external and i/o interrupts but doesn't split up them any further. This patch adds a line for every single interrupt source so that it is possible to easier tell what the machine is/was doing. Part of the output now looks like this; CPU0 CPU2 CPU4 EXT: 3898 4232 2305 I/O: 782 315 245 CLK: 1029 1964 727 [EXT] Clock Comparator IPI: 2868 2267 1577 [EXT] Signal Processor TMR: 0 0 0 [EXT] CPU Timer TAL: 0 0 0 [EXT] Timing Alert PFL: 0 0 0 [EXT] Pseudo Page Fault [...] NMI: 0 1 1 [NMI] Machine Checks Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] time: let local_tick_enable/disable() reprogram the clock comparatorHeiko Carstens2-2/+2
Let local_tick_enable/disable() reprogram the clock comparator so the function names make semantically more sense. Also that way the functions are more symmetric since normally each local_tick_enable() call usually would have a subsequent call to set_clock_comparator() anyway. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] time: move local_tick_enable()/disable() to timex.hHeiko Carstens2-16/+18
Move the two functions to timex.h where they make more sense than in hardirq.h. No functional change. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] add kprobes annotationsMartin Schwidefsky8-9/+26
Add kprobes annotations to get the massive 'probe kernel.function("*") {}' stress test working. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: coding styleMartin Schwidefsky1-34/+34
Correct some minor coding style issues. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: restructure handler functionMartin Schwidefsky1-43/+71
Restructure the kprobe breakpoint handler function. Add comments to make it more comprehensible and add a sanity check for re-entering kprobes. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: jprobe save and restoreMartin Schwidefsky2-13/+8
Register %r14 and %r15 are already stored in jprobe_saved_regs, no need to store them a second time in jprobe_saved_r14 / jprobe_saved_r15. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: insn slotsMartin Schwidefsky2-10/+1
The s390 architecture can execute code on kmalloc/vmalloc memory. No need for the __ARCH_WANT_KPROBES_INSN_SLOT detour. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: activation and deactivationMartin Schwidefsky1-32/+27
Replace set_current_kprobe/reset_current_kprobe/save_previous_kprobe/ restore_previous_kprobe with a simpler scheme push_kprobe/pop_kprobe. The mini kprobes stack can store up to two active kprobes. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: instruction fixupMartin Schwidefsky2-78/+57
Determine instruction fixup details in resume_execution, no need to do it beforehand. Remove fixup, ilen and reg from arch_specific_insn. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: instruction swapMartin Schwidefsky2-12/+9
Move the definition of the helper structure ins_replace_args to the only place where it is used and drop the old member as it is not needed. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: single step cleanupMartin Schwidefsky2-44/+36
The saved interrupt mask and the saved control registers are only relevant while single stepping is set up. A secondary kprobe while kprobe single stepping is active may not occur. That makes is safe to remove the save and restore of kprobe_saved_imask / kprobe_save_ctl from save_previous_kprobe and restore_previous_kprobe. Move all single step related code to two functions, enable_singlestep and disable_singlestep. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] kprobes: single stepped breakpointMartin Schwidefsky1-6/+0
Remove special case of a kprobe on a breakpoint while a relocated instruction is single stepped. The only instruction that may cause a fault while kprobe single stepping is active is the relocated instruction. There is no kprobe on the instruction slot retrieved with get_insn_slot(). Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] cleanup s390 KconfigMartin Schwidefsky7-220/+218
Make use of def_bool and def_tristate where possible and add sensible defaults to the config symbols where applicable. This shortens the defconfig file by another ~40 lines. Signed-off-by: Martin Schwidefsky <[email protected]>
2011-01-05[S390] zcrypt: Fix check to look for facility bits 2 & 65Felix Beck1-1/+1
Fix the check for ap interupts to look for facility bits 2 and 65. Make sure that we only register interrupts for aps, if the machine has ap interrupt support. This patch is relevant only for the 2.6.37 stable series. Cc: [email protected] Signed-off-by: Felix Beck <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.