aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-11-09drm/amd/display: Update SR watermarks for DCN314Nicholas Kazlauskas2-18/+18
[Why & How] New values requested by hardware after fine-tuning. Update for all memory types. Reviewed-by: Jun Lei <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.0.x
2022-11-09drm/amdgpu: workaround for TLB seq raceChristian König1-0/+15
It can happen that we query the sequence value before the callback had a chance to run. Workaround that by grabbing the fence lock and releasing it again. Should be replaced by hw handling soon. Signed-off-by: Christian König <[email protected]> CC: [email protected] # 5.19+ Fixes: 5255e146c99a6 ("drm/amdgpu: rework TLB flushing") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2113 Acked-by: Alex Deucher <[email protected]> Acked-by: Philip Yang <[email protected]> Tested-by: Stefan Springer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-09drm/amdkfd: Fix error handling in criu_checkpointFelix Kuehling1-19/+15
Checkpoint BOs last. That way we don't need to close dmabuf FDs if something else fails later. This avoids problematic access to user mode memory in the error handling code path. criu_checkpoint_bos has its own error handling and cleanup that does not depend on access to user memory. In the private data, keep BOs before the remaining objects. This is necessary to restore things in the correct order as restoring events depends on the events-page BO being restored first. Fixes: be072b06c739 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects") Reported-by: Jann Horn <[email protected]> CC: Rajneesh Bhardwaj <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Reviewed-and-tested-by: Rajneesh Bhardwaj <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-11-09drm/amdkfd: Fix error handling in kfd_criu_restore_eventsFelix Kuehling1-2/+1
mutex_unlock before the exit label because all the error code paths that jump there didn't take that lock. This fixes unbalanced locking errors in case of restore errors. Fixes: 40e8a766a761 ("drm/amdkfd: CRIU checkpoint and restore events") Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Rajneesh Bhardwaj <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-11-09drm/amd/pm: update SMU IP v13.0.4 msg interface headerTim Huang1-8/+7
Some of the unused messages that were used earlier in development have been freed up as spare messages, no intended functional changes. Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Tim Huang <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.0.x
2022-11-09iavf: Fix VF driver counting VLAN 0 filtersMichal Jaron1-0/+2
VF driver mistakenly counts VLAN 0 filters, when no PF driver counts them. Do not count VLAN 0 filters, when VLAN_V2 is engaged. Counting those filters in, will affect filters size by -1, when sending batched VLAN addition message. Fixes: 968996c070ef ("iavf: Fix VLAN_V2 addition/rejection") Signed-off-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Michal Jaron <[email protected]> Signed-off-by: Kamil Maziarz <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-11-09ice: Fix spurious interrupt during removal of trusted VFNorbert Zulinski4-2/+31
Previously, during removal of trusted VF when VF is down there was number of spurious interrupt equal to number of queues on VF. Add check if VF already has inactive queues. If VF is disabled and has inactive rx queues then do not disable rx queues. Add check in ice_vsi_stop_tx_ring if it's VF's vsi and if VF is disabled. Fixes: efe41860008e ("ice: Fix memory corruption in VF driver") Signed-off-by: Norbert Zulinski <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-11-09Merge tag 'slab-for-6.1-rc4-fixes' of ↵Linus Torvalds2-43/+4
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab fixes from Vlastimil Babka: "Most are small fixups as described below. The !CONFIG_TRACING fix is a bit bigger and would normally be done in the next merge window as part of upcoming hardening changes. But we realized it can make the kmalloc waste tracking introduced in this window inaccurate, so decided to go with it now. Summary: - Remove !CONFIG_TRACING kmalloc() wrappers intended to save a function call, due to incompatilibity with recently introduced wasted space tracking and planned hardening changes. - A tracing parameter regression fix, by Kees Cook. - Two kernel-doc warning fixups, by Lukas Bulwahn and myself * tag 'slab-for-6.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm, slab: remove duplicate kernel-doc comment for ksize() mm/slab_common: Restore passing "caller" for tracing mm/slab: remove !CONFIG_TRACING variants of kmalloc_[node_]trace() mm/slab_common: repair kernel-doc for __ksize()
2022-11-09net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actionsRoi Dayan1-2/+6
esw_attr is only allocated if namespace is fdb. BUG: KASAN: slab-out-of-bounds in parse_tc_actions+0xdc6/0x10e0 [mlx5_core] Write of size 4 at addr ffff88815f185b04 by task tc/2135 CPU: 5 PID: 2135 Comm: tc Not tainted 6.1.0-rc2+ #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x7d print_report+0x170/0x471 ? parse_tc_actions+0xdc6/0x10e0 [mlx5_core] kasan_report+0xbc/0xf0 ? parse_tc_actions+0xdc6/0x10e0 [mlx5_core] parse_tc_actions+0xdc6/0x10e0 [mlx5_core] Fixes: 94d651739e17 ("net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5e: E-Switch, Fix comparing termination table instanceRoi Dayan1-6/+8
The pkt_reformat pointer being saved under flow_act and not dest attribute in the termination table instance. Fix the comparison pointers. Also fix returning success if one pkt_reformat pointer is null and the other is not. Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Chris Mi <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5e: TC, Fix wrong rejection of packet-per-second policingJianbo Liu1-6/+0
In the bellow commit, we added support for PPS policing without removing the check which block offload of such cases. Fix it by removing this check. Fixes: a8d52b024d6d ("net/mlx5e: TC, Support offloading police action") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5e: Fix tc acts array not to be dependent on enum orderRoi Dayan1-60/+32
The tc acts array should not be dependent on kernel internal flow action id enum. Fix the array initialization. Fixes: fad547906980 ("net/mlx5e: Add tc action infrastructure") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5e: Fix usage of DMA sync APIMaxim Mikityanskiy2-15/+16
DMA sync functions should use the same direction that was used by DMA mapping. Use DMA_BIDIRECTIONAL for XDP_TX from regular RQ, which reuses the same mapping that was used for RX, and DMA_TO_DEVICE for XDP_TX from XSK RQ and XDP_REDIRECT, which establish a new mapping in this direction. On the RX side, use the same direction that was used when setting up the mapping (DMA_BIDIRECTIONAL for XDP, DMA_FROM_DEVICE otherwise). Also don't skip sync for device when establishing a DMA_FROM_DEVICE mapping for RX, as some architectures (ARM) may require invalidating caches before the device can use the mapping. It doesn't break the bugfix made in commit 0b7cfa4082fb ("net/mlx5e: Fix page DMA map/unmap attributes"), since the bug happened on unmap. Fixes: 0b7cfa4082fb ("net/mlx5e: Fix page DMA map/unmap attributes") Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Maxim Mikityanskiy <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5e: Add missing sanity checks for max TX WQE sizeMaxim Mikityanskiy3-1/+35
The commit cited below started using the firmware capability for the maximum TX WQE size. This commit adds an important check to verify that the driver doesn't attempt to exceed this capability, and also restores another check mistakenly removed in the cited commit (a WQE must not exceed the page size). Fixes: c27bd1718c06 ("net/mlx5e: Read max WQEBBs on the SQ from firmware") Signed-off-by: Maxim Mikityanskiy <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5: fw_reset: Don't try to load device in case PCI isn't workingShay Drory1-1/+2
In case PCI reads fail after unload, there is no use in trying to load the device. Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5: E-switch, Set to legacy mode if failed to change switchdev modeChris Mi2-21/+11
No need to rollback to the other mode because probably will fail again. Just set to legacy mode and clear fdb table created flag. So that fdb table will not be cleared again. Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5: Allow async trigger completion execution on single CPU systemsRoy Novich1-3/+8
For a single CPU system, the kernel thread executing mlx5_cmd_flush() never releases the CPU but calls down_trylock(&cmd→sem) in a busy loop. On a single processor system, this leads to a deadlock as the kernel thread which executes mlx5_cmd_invoke() never gets scheduled. Fix this, by adding the cond_resched() call to the loop, allow the command completion kernel thread to execute. Fixes: 8e715cd613a1 ("net/mlx5: Set command entry semaphore up once got index free") Signed-off-by: Alexander Schmidt <[email protected]> Signed-off-by: Roy Novich <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5: Bridge, verify LAG state when adding bond to bridgeVlad Buslov1-0/+31
Mlx5 LAG is initialized asynchronously on a workqueue which means that for a brief moment after setting mlx5 UL representors as lower devices of a bond netdevice the LAG itself is not fully initialized in the driver. When adding such bond device to a bridge mlx5 bridge code will not consider it as offload-capable, skip creating necessary bookkeeping and fail any further bridge offload-related commands with it (setting VLANs, offloading FDBs, etc.). In order to make the error explicit during bridge initialization stage implement the code that detects such condition during NETDEV_PRECHANGEUPPER event and returns an error. Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390Heiko Carstens1-1/+1
Before version 15.0.0 llvm's integrated assembler may silently generate corrupted code on s390. See e.g. commit e9953b729b78 ("s390/boot: workaround llvm IAS bug") for further details. While there have been workarounds applied for all known existing locations, there is nothing that prevents that new code with problematic patterns will be added. Therefore raise the minimum clang version to 15.0.0. Note that llvm commit e547b04d5b2c ("[SystemZ] Bugfix for symbolic displacements."), which is included in 15.0.0, fixes the broken code generation. Signed-off-by: Heiko Carstens <[email protected]> Acked-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexander Gordeev <[email protected]>
2022-11-09Merge tag 'kvm-s390-master-6.1-1' of ↵Paolo Bonzini251-1718/+3474
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD A PCI allocation fix and a PV clock fix.
2022-11-09KVM: x86/pmu: Limit the maximum number of supported AMD GP countersLike Xu3-3/+8
The AMD PerfMonV2 specification allows for a maximum of 16 GP counters, but currently only 6 pairs of MSRs are accepted by KVM. While AMD64_NUM_COUNTERS_CORE is already equal to 6, increasing without adjusting msrs_to_save_all[] could result in out-of-bounds accesses. Therefore introduce a macro (named KVM_AMD_PMC_MAX_GENERIC) to refer to the number of counters supported by KVM. Signed-off-by: Like Xu <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86/pmu: Limit the maximum number of supported Intel GP countersLike Xu4-9/+15
The Intel Architectural IA32_PMCx MSRs addresses range allows for a maximum of 8 GP counters, and KVM cannot address any more. Introduce a local macro (named KVM_INTEL_PMC_MAX_GENERIC) and use it consistently to refer to the number of counters supported by KVM, thus avoiding possible out-of-bound accesses. Suggested-by: Jim Mattson <[email protected]> Signed-off-by: Like Xu <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86/pmu: Do not speculatively query Intel GP PMCs that don't exist yetLike Xu1-12/+2
The SDM lists an architectural MSR IA32_CORE_CAPABILITIES (0xCF) that limits the theoretical maximum value of the Intel GP PMC MSRs allocated at 0xC1 to 14; likewise the Intel April 2022 SDM adds IA32_OVERCLOCKING_STATUS at 0x195 which limits the number of event selection MSRs to 15 (0x186-0x194). Limiting the maximum number of counters to 14 or 18 based on the currently allocated MSRs is clearly fragile, and it seems likely that Intel will even place PMCs 8-15 at a completely different range of MSR indices. So stop at the maximum number of GP PMCs supported today on Intel processors. There are some machines, like Intel P4 with non Architectural PMU, that may indeed have 18 counters, but those counters are in a completely different MSR address range and are not supported by KVM. Cc: Vitaly Kuznetsov <[email protected]> Cc: [email protected] Fixes: cf05a67b68b8 ("KVM: x86: omit "impossible" pmu MSRs from MSR list") Suggested-by: Jim Mattson <[email protected]> Signed-off-by: Like Xu <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: Only dump VMSA to klog at KERN_DEBUG levelPeter Gonda1-1/+1
Explicitly print the VMSA dump at KERN_DEBUG log level, KERN_CONT uses KERNEL_DEFAULT if the previous log line has a newline, i.e. if there's nothing to continuing, and as a result the VMSA gets dumped when it shouldn't. The KERN_CONT documentation says it defaults back to KERNL_DEFAULT if the previous log line has a newline. So switch from KERN_CONT to print_hex_dump_debug(). Jarkko pointed this out in reference to the original patch. See: https://lore.kernel.org/all/[email protected]/ print_hex_dump(KERN_DEBUG, ...) was pointed out there, but print_hex_dump_debug() should similar. Fixes: 6fac42f127b8 ("KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog") Signed-off-by: Peter Gonda <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Cc: Jarkko Sakkinen <[email protected]> Cc: Harald Hoyer <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Dave Hansen <[email protected]> Cc: [email protected] Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09tools/kvm_stat: update exit reasons for vmx/svm/aarch64/userspaceRong Tao1-14/+82
Update EXIT_REASONS from source, including VMX_EXIT_REASONS, SVM_EXIT_REASONS, AARCH64_EXIT_REASONS, USERSPACE_EXIT_REASONS. Signed-off-by: Rong Tao <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09tools/kvm_stat: fix incorrect detection of debugfsMatthias Gerstner1-1/+1
The first field in /proc/mounts can be influenced by unprivileged users through the widespread `fusermount` setuid-root program. Example: ``` user$ mkdir ~/mydebugfs user$ export _FUSE_COMMFD=0 user$ fusermount ~/mydebugfs -ononempty,fsname=debugfs user$ grep debugfs /proc/mounts debugfs /home/user/mydebugfs fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0 ``` If there is no debugfs already mounted in the system then this can be used by unprivileged users to trick kvm_stat into using a user controlled file system location for obtaining KVM statistics. Even though the root user is not allowed to access non-root FUSE mounts for security reasons, the unprivileged user can unmount the FUSE mount before kvm_stat uses the mounted path. If it wins the race, kvm_stat will read from the location where the FUSE mount resided. Note that the files in debugfs are only opened for reading, so the attacker can cause very large data to be read in by kvm_stat, or fake data to be processed, but there should be no viable way to turn this into a privilege escalation. The fix is simply to use the file system type field instead. Whitespace in the mount path is escaped in /proc/mounts thus no further safety measures in the parsing should be necessary to make this correct. Message-Id: <[email protected]> Signed-off-by: Matthias Gerstner <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09x86, KVM: remove unnecessary argument to x86_virt_spec_ctrl and callersPaolo Bonzini3-8/+8
x86_virt_spec_ctrl only deals with the paravirtualized MSR_IA32_VIRT_SPEC_CTRL now and does not handle MSR_IA32_SPEC_CTRL anymore; remove the corresponding, unused argument. Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: move MSR_IA32_SPEC_CTRL save/restore to assemblyPaolo Bonzini5-38/+136
Restoration of the host IA32_SPEC_CTRL value is probably too late with respect to the return thunk training sequence. With respect to the user/kernel boundary, AMD says, "If software chooses to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel exit), software should set STIBP to 1 before executing the return thunk training sequence." I assume the same requirements apply to the guest/host boundary. The return thunk training sequence is in vmenter.S, quite close to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's IA32_SPEC_CTRL value is not restored until much later. To avoid this, move the restoration of host SPEC_CTRL to assembly and, for consistency, move the restoration of the guest SPEC_CTRL as well. This is not particularly difficult, apart from some care to cover both 32- and 64-bit, and to share code between SEV-ES and normal vmentry. Cc: [email protected] Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Suggested-by: Jim Mattson <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: restore host save area from assemblyPaolo Bonzini5-13/+26
Allow access to the percpu area via the GS segment base, which is needed in order to access the saved host spec_ctrl value. In linux-next FILL_RETURN_BUFFER also needs to access percpu data. For simplicity, the physical address of the save area is added to struct svm_cpu_data. Cc: [email protected] Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Reported-by: Nathan Chancellor <[email protected]> Analyzed-by: Andrew Cooper <[email protected]> Tested-by: Nathan Chancellor <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: move guest vmsave/vmload back to assemblyPaolo Bonzini3-20/+39
It is error-prone that code after vmexit cannot access percpu data because GSBASE has not been restored yet. It forces MSR_IA32_SPEC_CTRL save/restore to happen very late, after the predictor untraining sequence, and it gets in the way of return stack depth tracking (a retbleed mitigation that is in linux-next as of 2022-11-09). As a first step towards fixing that, move the VMCB VMSAVE/VMLOAD to assembly, essentially undoing commit fb0c4a4fee5a ("KVM: SVM: move VMLOAD/VMSAVE to C code", 2021-03-15). The reason for that commit was that it made it simpler to use a different VMCB for VMLOAD/VMSAVE versus VMRUN; but that is not a big hassle anymore thanks to the kvm-asm-offsets machinery and other related cleanups. The idea on how to number the exception tables is stolen from a prototype patch by Peter Zijlstra. Cc: [email protected] Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Link: <https://lore.kernel.org/all/[email protected]/> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: do not allocate struct svm_cpu_data dynamicallyPaolo Bonzini3-29/+18
The svm_data percpu variable is a pointer, but it is allocated via svm_hardware_setup() when KVM is loaded. Unlike hardware_enable() this means that it is never NULL for the whole lifetime of KVM, and static allocation does not waste any memory compared to the status quo. It is also more efficient and more easily handled from assembly code, so do it and don't look back. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: remove dead field from struct svm_cpu_dataPaolo Bonzini2-3/+0
The "cpu" field of struct svm_cpu_data has been write-only since commit 4b656b120249 ("KVM: SVM: force new asid on vcpu migration", 2009-08-05). Remove it. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: remove unused field from struct vcpu_svmPaolo Bonzini1-1/+0
The pointer to svm_cpu_data in struct vcpu_svm looks interesting from the point of view of accessing it after vmexit, when the GSBASE is still containing the guest value. However, despite existing since the very first commit of drivers/kvm/svm.c (commit 6aa8b732ca01, "[PATCH] kvm: userspace interface", 2006-12-10), it was never set to anything. Ignore the opportunity to fix a 16 year old "bug" and delete it; doing things the "harder" way makes it possible to remove more old cruft. Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: retrieve VMCB from assemblyPaolo Bonzini4-15/+16
Continue moving accesses to struct vcpu_svm to vmenter.S. Reducing the number of arguments limits the chance of mistakes due to different registers used for argument passing in 32- and 64-bit ABIs; pushing the VMCB argument and almost immediately popping it into a different register looks pretty weird. 32-bit ABI is not a concern for __svm_sev_es_vcpu_run() which is 64-bit only; however, it will soon need @svm to save/restore SPEC_CTRL so stay consistent with __svm_vcpu_run() and let them share the same prototype. No functional change intended. Cc: [email protected] Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: adjust register allocation for __svm_vcpu_run()Paolo Bonzini1-19/+19
32-bit ABI uses RAX/RCX/RDX as its argument registers, so they are in the way of instructions that hardcode their operands such as RDMSR/WRMSR or VMLOAD/VMRUN/VMSAVE. In preparation for moving vmload/vmsave to __svm_vcpu_run(), keep the pointer to the struct vcpu_svm in %rdi. In particular, it is now possible to load svm->vmcb01.pa in %rax without clobbering the struct vcpu_svm pointer. No functional change intended. Cc: [email protected] Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: SVM: replace regs argument of __svm_vcpu_run() with vcpu_svmPaolo Bonzini5-20/+30
Since registers are reachable through vcpu_svm, and we will need to access more fields of that struct, pass it instead of the regs[] array. No functional change intended. Cc: [email protected] Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09KVM: x86: use a separate asm-offsets.c filePaolo Bonzini5-7/+30
This already removes an ugly #include "" from asm-offsets.c, but especially it avoids a future error when trying to define asm-offsets for KVM's svm/svm.h header. This would not work for kernel/asm-offsets.c, because svm/svm.h includes kvm_cache_regs.h which is not in the include path when compiling asm-offsets.c. The problem is not there if the .c file is in arch/x86/kvm. Suggested-by: Sean Christopherson <[email protected]> Cc: [email protected] Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk") Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller3-7/+11
Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Fix deadlock in nfnetlink due to missing mutex release in error path, from Ziyang Xuan. 2) Clean up pending autoload module list from nf_tables_exit_net() path, from Shigeru Yoshida. 3) Fixes for the netfilter's reverse path selftest, from Phil Sutter. All of these bugs have been around for several releases. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-11-09drm: rcar-du: Fix Kconfig dependency between RCAR_DU and RCAR_MIPI_DSILaurent Pinchart1-4/+9
When the R-Car MIPI DSI driver was added, it was a standalone encoder driver without any dependency to or from the R-Car DU driver. Commit 957fe62d7d15 ("drm: rcar-du: Fix DSI enable & disable sequence") then added a direct call from the DU driver to the MIPI DSI driver, without updating Kconfig to take the new dependency into account. Fix it the same way that the LVDS encoder is handled. Fixes: 957fe62d7d15 ("drm: rcar-du: Fix DSI enable & disable sequence") Reported-by: kernel test robot <[email protected]> Reviewed-by: Tomi Valkeinen <[email protected]> Signed-off-by: Laurent Pinchart <[email protected]>
2022-11-09drm/panfrost: Split io-pgtable requests properlyRobin Murphy1-1/+10
Although we don't use 1GB block mappings, we still need to split map/unmap requests at 1GB boundaries to match what io-pgtable expects. Fix that, and add some explanation to make sense of it all. Fixes: 3740b081795a ("drm/panfrost: Update io-pgtable API") Reported-by: Dmitry Osipenko <[email protected]> Signed-off-by: Robin Murphy <[email protected]> Tested-by: Dmitry Osipenko <[email protected]> Reviewed-by: Steven Price <[email protected]> Signed-off-by: Steven Price <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/49e54bb4019cd06e01549b106d7ac37c3d182cd3.1667927179.git.robin.murphy@arm.com
2022-11-09Merge branch 'wwan-iosm-fixes'David S. Miller6-4/+27
M Chetan Kumar says: ==================== net: wwan: iosm: fixes This patch series contains iosm fixes. PATCH1: Fix memory leak in ipc_pcie_read_bios_cfg. PATCH2: Fix driver not working with INTEL_IOMMU disabled config. PATCH3: Fix invalid mux header type. PATCH4: Fix kernel build robot reported errors. Please refer to individual commit message for details. -- v2: * PATCH1: No Change * PATCH2: Kconfig change - Add dependency on PCI to resolve kernel build robot errors. * PATCH3: No Change * PATCH4: New (Fix kernel build robot errors) ==================== Signed-off-by: David S. Miller <[email protected]>
2022-11-09net: wwan: iosm: fix kernel test robot reported errorsM Chetan Kumar2-0/+2
Include linux/vmalloc.h in iosm_ipc_coredump.c & iosm_ipc_devlink.c to resolve kernel test robot errors. Reported-by: kernel test robot <[email protected]> Signed-off-by: M Chetan Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-09net: wwan: iosm: fix invalid mux header typeM Chetan Kumar2-0/+9
Data stall seen during peak DL throughput test & packets are dropped by mux layer due to invalid header type in datagram. During initlization Mux aggregration protocol is set to default UL/DL size and TD count of Mux lite protocol. This configuration mismatch between device and driver is resulting in data stall/packet drops. Override the UL/DL size and TD count for Mux aggregation protocol. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by: M Chetan Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-09net: wwan: iosm: fix driver not working with INTEL_IOMMU disabledM Chetan Kumar2-1/+8
With INTEL_IOMMU disable config or by forcing intel_iommu=off from grub some of the features of IOSM driver like browsing, flashing & coredump collection is not working. When driver calls DMA API - dma_map_single() for tx transfers. It is resulting in dma mapping error. Set the device DMA addressing capabilities using dma_set_mask() and remove the INTEL_IOMMU dependency in kconfig so that driver follows the platform config either INTEL_IOMMU enable or disable. Fixes: f7af616c632e ("net: iosm: infrastructure") Signed-off-by: M Chetan Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-09net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfgM Chetan Kumar1-3/+8
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to obtain the wwan power state configuration from BIOS but is not freeing the acpi_object. The acpi_evaluate_dsm() returned acpi_object to be freed. Free the acpi_object after use. Fixes: 7e98d785ae61 ("net: iosm: entry point") Signed-off-by: M Chetan Kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-09nvmet: fix a memory leakSagi Grimberg1-0/+1
We need to also free the dhchap_ctrl_secret when releasing nvmet_host. kmemleak complaint: -- unreferenced object 0xffff99b1cbca5140 (size 64): comm "check", pid 4864, jiffies 4305092436 (age 2913.583s) hex dump (first 32 bytes): 44 48 48 43 2d 31 3a 30 30 3a 65 36 2b 41 63 44 DHHC-1:00:e6+AcD 39 76 47 4d 52 57 59 78 67 54 47 44 51 59 47 78 9vGMRWYxgTGDQYGx backtrace: [<00000000c07d369d>] kstrdup+0x2e/0x60 [<000000001372171c>] 0xffffffffc0cceec6 [<0000000010dbf50b>] 0xffffffffc0cc6783 [<000000007465e93c>] configfs_write_iter+0xb1/0x120 [<0000000039c23f62>] vfs_write+0x2be/0x3c0 [<000000002da4351c>] ksys_write+0x5f/0xe0 [<00000000d5011e32>] do_syscall_64+0x38/0x90 [<00000000503870cf>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication") Signed-off-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-11-09nvmet: fix memory leak in nvmet_subsys_attr_model_store_lockedAleksandr Miloserdov1-2/+5
Since model_number is allocated before it needs to be freed before kmemdump_nul. Reviewed-by: Konstantin Shelekhin <[email protected]> Reviewed-by: Dmitriy Bogdanov <[email protected]> Signed-off-by: Aleksandr Miloserdov <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-11-09nvme: quiet user passthrough command errorsKeith Busch2-4/+1
The driver is spamming the kernel logs for entirely harmless errors from user space submitting unsupported commands. Just silence the errors. The application has direct access to command status, so there's no need to log these. And since every passthrough command now uses the quiet flag, move the setting to the common initializer. Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Alan Adamson <[email protected]> Reviewed-by: Jens Axboe <[email protected]> Reviewed-by: Kanchan Joshi <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Daniel Wagner <[email protected]> Tested-by: Alan Adamson <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-11-09mmc: sdhci-esdhc-imx: use the correct host caps for MMC_CAP_8_BIT_DATAHaibo Chen1-2/+2
MMC_CAP_8_BIT_DATA belongs to struct mmc_host, not struct sdhci_host. So correct it here. Fixes: 1ed5c3b22fc7 ("mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus") Signed-off-by: Haibo Chen <[email protected]> Cc: [email protected] Acked-by: Adrian Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2022-11-09udf: Fix a slab-out-of-bounds write bug in udf_find_entry()ZhangPeng1-1/+1
Syzbot reported a slab-out-of-bounds Write bug: loop0: detected capacity change from 0 to 2048 ================================================================== BUG: KASAN: slab-out-of-bounds in udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253 Write of size 105 at addr ffff8880123ff896 by task syz-executor323/3610 CPU: 0 PID: 3610 Comm: syz-executor323 Not tainted 6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report+0xcd/0x100 mm/kasan/report.c:495 kasan_check_range+0x2a7/0x2e0 mm/kasan/generic.c:189 memcpy+0x3c/0x60 mm/kasan/shadow.c:66 udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253 udf_lookup+0xef/0x340 fs/udf/namei.c:309 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3710 do_filp_open+0x264/0x4f0 fs/namei.c:3740 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7ffab0d164d9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffe1a7e6bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffab0d164d9 RDX: 00007ffab0d164d9 RSI: 0000000000000000 RDI: 0000000020000180 RBP: 00007ffab0cd5a10 R08: 0000000000000000 R09: 0000000000000000 R10: 00005555573552c0 R11: 0000000000000246 R12: 00007ffab0cd5aa0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 3610: kasan_save_stack mm/kasan/common.c:45 [inline] kasan_set_track+0x3d/0x60 mm/kasan/common.c:52 ____kasan_kmalloc mm/kasan/common.c:371 [inline] __kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380 kmalloc include/linux/slab.h:576 [inline] udf_find_entry+0x7b6/0x14f0 fs/udf/namei.c:243 udf_lookup+0xef/0x340 fs/udf/namei.c:309 lookup_open fs/namei.c:3391 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x10e6/0x2df0 fs/namei.c:3710 do_filp_open+0x264/0x4f0 fs/namei.c:3740 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff8880123ff800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 150 bytes inside of 256-byte region [ffff8880123ff800, ffff8880123ff900) The buggy address belongs to the physical page: page:ffffea000048ff80 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x123fe head:ffffea000048ff80 order:1 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 ffffea00004b8500 dead000000000003 ffff888012041b40 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0(), pid 1, tgid 1 (swapper/0), ts 1841222404, free_ts 0 create_dummy_stack mm/page_owner.c:67 [inline] register_early_stack+0x77/0xd0 mm/page_owner.c:83 init_page_owner+0x3a/0x731 mm/page_owner.c:93 kernel_init_freeable+0x41c/0x5d5 init/main.c:1629 kernel_init+0x19/0x2b0 init/main.c:1519 page_owner free stack trace missing Memory state around the buggy address: ffff8880123ff780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8880123ff800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8880123ff880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 ^ ffff8880123ff900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8880123ff980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Fix this by changing the memory size allocated for copy_name from UDF_NAME_LEN(254) to UDF_NAME_LEN_CS0(255), because the total length (lfi) of subsequent memcpy can be up to 255. CC: [email protected] Reported-by: [email protected] Fixes: 066b9cded00b ("udf: Use separate buffer for copying split names") Signed-off-by: ZhangPeng <[email protected]> Signed-off-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.