| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since we already implemented vdpa_config_ops.get_vq_size,
so get_max_vq_size can return the acutal max size of the
virtqueues other than the max allowed safe size.
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
The size of a virtqueue is a per vq configuration,
this commit allows virtio_vdpa to create
virtqueues with the actual size of a specific
vq size that supported by the backend device.
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This commit implements get_vq_size for vdpa_config_ops. This
new interface is used to report per vq size.
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This commit implements vdpa_config_ops.get_vq_size for vDPA
simulator, this new interface can help report per vq size.
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This commit implements get_vq_size which report
per vq size in vdpa_config_ops
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This commit implements vdpa_config_ops.get_vq_size in
vp_vdpa, which reports per virtqueue size.
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This commit implements vdpa_ops.get_vq_size to report
the size of a specific virtqueue.
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This commit introduces a new interface get_vq_size to
vDPA config ops, this new interface intends to report
the size of a specific virtqueue
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
The size of a virtqueue is a per vq configuration.
This commit introduce a new ioctl uAPI to support this flexibility.
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This addresses a couple of things found while testing the FLR and AER
handling with the VFs.
- release irqs before calling vp_modern_remove()
- make sure we have a valid struct pointer before using it to release irqs
- make sure the FW is alive before trying to add a new device
Signed-off-by: Shannon Nelson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Since commit 295525e29a5b ("virtio_net: merge dma
operations when filling mergeable buffers"), VDUSE device
require support for DMA's .sync_single_for_cpu() operation
as the memory is non-coherent between the device and CPU
because of the use of a bounce buffer.
This patch implements both .sync_single_for_cpu() and
.sync_single_for_device() callbacks, and also skip bounce
buffer copies during DMA map and unmap operations if the
DMA_ATTR_SKIP_CPU_SYNC attribute is set to avoid extra
copies of the same buffer.
Signed-off-by: Maxime Coquelin <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
The MLX driver was not updating its control virtqueue size at set_vq_num
and instead always initialized to MLX5_CVQ_MAX_ENT (16) at
setup_cvq_vring.
Qemu would try to set the size to 64 by default, however, because the
CVQ size always was initialized to 16, an error would be thrown when
sending >16 control messages (as used-ring entry 17 is initialized to 0).
For example, starting a guest with x-svq=on and then executing the
following command would produce the error below:
# for i in {1..20}; do ifconfig eth0 hw ether XX:xx:XX:xx:XX:XX; done
qemu-system-x86_64: Insufficient written data (0)
[ 435.331223] virtio_net virtio0: Failed to set mac address by vq command.
SIOCSIFHWADDR: Invalid argument
Acked-by: Dragos Tatulea <[email protected]>
Acked-by: Eugenio Pérez <[email protected]>
Signed-off-by: Jonah Palmer <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Tested-by: Lei Yang <[email protected]>
Fixes: 5262912ef3cf ("vdpa/mlx5: Add support for control VQ and MAC setting")
|
|
If a vdpa device is not in state DRIVER_OK, then there is no driver state
to preserve, so no need to call the suspend and resume driver ops.
Suggested-by: Eugenio Perez Martin <[email protected]>"
Signed-off-by: Steve Sistare <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Eugenio Pérez <[email protected]>
|
|
Currently, we don't reenable the config if freezing the device failed.
For example, virtio-mem currently doesn't support suspend+resume, and
trying to freeze the device will always fail. Afterwards, the device
will no longer respond to resize requests, because it won't get notified
about config changes.
Let's fix this by re-enabling the config if freezing fails.
Fixes: 22b7050a024d ("virtio: defer config changed notifications")
Cc: <[email protected]>
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Xuan Zhuo <[email protected]>
Signed-off-by: David Hildenbrand <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
vdpasim_do_reset sets running to true, which is wrong, as it allows
vdpasim_kick_vq to post work requests before the device has been
configured. To fix, do not set running until VIRTIO_CONFIG_S_DRIVER_OK
is set.
Fixes: 0c89e2a3a9d0 ("vdpa_sim: Implement suspend vdpa op")
Signed-off-by: Steve Sistare <[email protected]>
Reviewed-by: Eugenio Pérez <[email protected]>
Acked-by: Jason Wang <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Commit 92792ac752aa ("virtio-pci: Introduce admin command sending function")
added "__packed" structures to UAPI header linux/virtio_pci.h. This triggers
build failures in the consumer userspace applications without proper "definition"
of __packed (e.g., kvmtool build fails).
Moreover, the structures are already packed well, and doesn't need explicit
packing, similar to the rest of the structures in all virtio_* headers. Remove
the __packed attribute.
Fixes: 92792ac752aa ("virtio-pci: Introduce admin command sending function")
Cc: Feng Liu <[email protected]>
Cc: Michael S. Tsirkin <[email protected]>
Cc: Yishai Hadas <[email protected]>
Cc: Alex Williamson <[email protected]>
Cc: Jean-Philippe Brucker <[email protected]>
Reviewed-by: Jean-Philippe Brucker <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
When the Qemu launched with vhost but without tap vnet_hdr,
vhost tries to copy vnet_hdr from socket iter with size 0
to the page that may contain some trash.
That trash can be interpreted as unpredictable values for
vnet_hdr.
That leads to dropping some packets and in some cases to
stalling vhost routine when the vhost_net tries to process
packets and fails in a loop.
Qemu options:
-netdev tap,vhost=on,vnet_hdr=off,...
Signed-off-by: Andrew Melnychenko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
We need to check for journal shutdown first in __journal_res_get() -
after the journal is shutdown, j->watermark won't be changing anymore.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
BCH_TRANS_COMMIT_journal_reclaim with watermark != BCH_WATERMARK_reclaim
means nonblocking, and we need the journal_res_get() in
btree_update_start() to respect that.
In a future refactoring we'll be deleting
BCH_TRANS_COMMIT_journal_reclaim and replacing it with an explicit
BCH_TRANS_COMMIT_nonblocking.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
ksmbd module version marking is not needed. Since there is a
Linux kernel version, there is no point in increasing it anymore.
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
I found potencial out-of-bounds when buffer offset fields of a few requests
is invalid. This patch set the minimum value of buffer offset field to
->Buffer offset to validate buffer length.
Cc: [email protected]
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
- Fix mistaken variable assignment that caused a refcounting problem
- Revert a recent change that began using atomic counters where they
were not needed (for lkb wait_count)
- Add comments around forced state reset for waiting lock operations
during recovery
* tag 'dlm-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: add comments about forced waiters reset
dlm: revert atomic_t lkb_wait_count
dlm: fix user space lkb refcounting
|
|
Pull rdma updates from Jason Gunthorpe:
"Very small update this cycle:
- Minor code improvements in fi, rxe, ipoib, mana, cxgb4, mlx5,
irdma, rxe, rtrs, mana
- Simplify the hns hem mechanism
- Fix EFA's MSI-X allocation in resource constrained configurations
- Fix a KASN splat in srpt
- Narrow hns's congestion control selection to QPs granularity and
allow userspace to select it
- Solve a parallel module loading race between the CM module and a
driver module
- Flexible array cleanup
- Dump hns's SCC Conext to 'rdma res' for debugging
- Make mana build page lists for HW objects that require a 0 offset
correctly
- Stuck CM ID debugging"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (29 commits)
RDMA/cm: add timeout to cm_destroy_id wait
RDMA/mana_ib: Use virtual address in dma regions for MRs
RDMA/mana_ib: Fix bug in creation of dma regions
RDMA/hns: Append SCC context to the raw dump of QPC
RDMA/uverbs: Avoid -Wflex-array-member-not-at-end warnings
RDMA/hns: Support userspace configuring congestion control algorithm with QP granularity
RDMA/rtrs-clt: Check strnlen return len in sysfs mpath_policy_store()
RDMA/uverbs: Remove flexible arrays from struct *_filter
RDMA/device: Fix a race between mad_client and cm_client init
RDMA/hns: Fix mis-modifying default congestion control algorithm
RDMA/rxe: Remove unused 'iova' parameter from rxe_mr_init_user
RDMA/srpt: Do not register event handler until srpt device is fully setup
RDMA/irdma: Remove duplicate assignment
RDMA/efa: Limit EQs to available MSI-X vectors
RDMA/mlx5: Delete unused mlx5_ib_copy_pas prototype
RDMA/cxgb4: Delete unused c4iw_ep_redirect prototype
RDMA/mana_ib: Introduce mana_ib_install_cq_cb helper function
RDMA/mana_ib: Introduce mana_ib_get_netdev helper function
RDMA/mana_ib: Introduce mdev_to_gc helper function
RDMA/hns: Simplify 'struct hns_roce_hem' allocation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Allow variables to contain variables. This makes the shell commands
have a bit more flexibility to reuse existing variables.
- Have make_warnings_file in build-only mode require limited variables
The make_warnings_file test will create a file with all existing
warnings (which can be used to compare against in builds with new
commits). Add it to the build-only list that doesn't require other
variables (like how to reset a machine), as the make_warnings_file
makes the most sense on build only tests.
* tag 'ktest-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: force $buildonly = 1 for 'make_warnings_file' test type
ktest.pl: Process variables within variables
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"Main user visible change:
- User events can now have "multi formats"
The current user events have a single format. If another event is
created with a different format, it will fail to be created. That
is, once an event name is used, it cannot be used again with a
different format. This can cause issues if a library is using an
event and updates its format. An application using the older format
will prevent an application using the new library from registering
its event.
A task could also DOS another application if it knows the event
names, and it creates events with different formats.
The multi-format event is in a different name space from the single
format. Both the event name and its format are the unique
identifier. This will allow two different applications to use the
same user event name but with different payloads.
- Added support to have ftrace_dump_on_oops dump out instances and
not just the main top level tracing buffer.
Other changes:
- Add eventfs_root_inode
Only the root inode has a dentry that is static (never goes away)
and stores it upon creation. There's no reason that the thousands
of other eventfs inodes should have a pointer that never gets set
in its descriptor. Create a eventfs_root_inode desciptor that has a
eventfs_inode descriptor and a dentry pointer, and only the root
inode will use this.
- Added WARN_ON()s in eventfs
There's some conditionals remaining in eventfs that should never be
hit, but instead of removing them, add WARN_ON() around them to
make sure that they are never hit.
- Have saved_cmdlines allocation also include the map_cmdline_to_pid
array
The saved_cmdlines structure allocates a large amount of data to
hold its mappings. Within it, it has three arrays. Two are already
apart of it: map_pid_to_cmdline[] and saved_cmdlines[]. More memory
can be saved by also including the map_cmdline_to_pid[] array as
well.
- Restructure __string() and __assign_str() macros used in
TRACE_EVENT()
Dynamic strings in TRACE_EVENT() are declared with:
__string(name, source)
And assigned with:
__assign_str(name, source)
In the tracepoint callback of the event, the __string() is used to
get the size needed to allocate on the ring buffer and
__assign_str() is used to copy the string into the ring buffer.
There's a helper structure that is created in the TRACE_EVENT()
macro logic that will hold the string length and its position in
the ring buffer which is created by __string().
There are several trace events that have a function to create the
string to save. This function is executed twice. Once for
__string() and again for __assign_str(). There's no reason for
this. The helper structure could also save the string it used in
__string() and simply copy that into __assign_str() (it also
already has its length).
By using the structure to store the source string for the
assignment, it means that the second argument to __assign_str() is
no longer needed.
It will be removed in the next merge window, but for now add a
warning if the source string given to __string() is different than
the source string given to __assign_str(), as the source to
__assign_str() isn't even used and will be going away.
- Added checks to make sure that the source of __string() is also the
source of __assign_str() so that it can be safely removed in the
next merge window.
Included fixes that the above check found.
- Other minor clean ups and fixes"
* tag 'trace-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits)
tracing: Add __string_src() helper to help compilers not to get confused
tracing: Use strcmp() in __assign_str() WARN_ON() check
tracepoints: Use WARN() and not WARN_ON() for warnings
tracing: Use div64_u64() instead of do_div()
tracing: Support to dump instance traces by ftrace_dump_on_oops
tracing: Remove second parameter to __assign_rel_str()
tracing: Add warning if string in __assign_str() does not match __string()
tracing: Add __string_len() example
tracing: Remove __assign_str_len()
ftrace: Fix most kernel-doc warnings
tracing: Decrement the snapshot if the snapshot trigger fails to register
tracing: Fix snapshot counter going between two tracers that use it
tracing: Use EVENT_NULL_STR macro instead of open coding "(null)"
tracing: Use ? : shortcut in trace macros
tracing: Do not calculate strlen() twice for __string() fields
tracing: Rework __assign_str() and __string() to not duplicate getting the string
cxl/trace: Properly initialize cxl_poison region name
net: hns3: tracing: fix hclgevf trace event strings
drm/i915: Add missing ; to __assign_str() macros in tracepoint code
NFSD: Fix nfsd_clid_class use of __string_len() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
"No functional changes - additional testing is required for the rest of
the pending changes.
- New shared repo for sysctl maintenance
- check-sysctl-docs adjustment for API changes by Thomas Weißschuh"
* tag 'sysctl-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
scripts: check-sysctl-docs: handle per-namespace sysctls
ipc: remove linebreaks from arguments of __register_sysctl_table
scripts: check-sysctl-docs: adapt to new API
MAINTAINERS: Update sysctl tree location
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"One fix, one cleanup...
Fix: Julia Lawall pointed out a null pointer dereference.
Cleanup: Vlastimil Babka sent me a patch to remove some SLAB related
code"
* tag 'for-linus-6.9-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
Julia Lawall reported this null pointer dereference, this should fix it.
fs/orangefs: remove ORANGEFS_CACHE_CREATE_FLAGS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs update from Jaegeuk Kim:
"In this round, there are a number of updates on mainly two areas:
Zoned block device support and Per-file compression. For example,
we've found several issues to support Zoned block device especially
having large sections regarding to GC and file pinning used for
Android devices. In compression side, we've fixed many corner race
conditions that had broken the design assumption.
Enhancements:
- Support file pinning for Zoned block device having large section
- Enhance the data recovery after sudden power cut on Zoned block
device
- Add more error injection cases to easily detect the kernel panics
- add a proc entry show the entire disk layout
- Improve various error paths paniced by BUG_ON in block allocation
and GC
- support SEEK_DATA and SEEK_HOLE for compression files
Bug fixes:
- avoid use-after-free issue in f2fs_filemap_fault
- fix some race conditions to break the atomic write design
assumption
- fix to truncate meta inode pages forcely
- resolve various per-file compression issues wrt the space
management and compression policies
- fix some swap-related bugs
In addition, we removed deprecated codes such as io_bits and
heap_allocation, and also fixed minor error handling routines with
neat debugging messages"
* tag 'f2fs-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (60 commits)
f2fs: fix to avoid use-after-free issue in f2fs_filemap_fault
f2fs: truncate page cache before clearing flags when aborting atomic write
f2fs: mark inode dirty for FI_ATOMIC_COMMITTED flag
f2fs: prevent atomic write on pinned file
f2fs: fix to handle error paths of {new,change}_curseg()
f2fs: unify the error handling of f2fs_is_valid_blkaddr
f2fs: zone: fix to remove pow2 check condition for zoned block device
f2fs: fix to truncate meta inode pages forcely
f2fs: compress: fix reserve_cblocks counting error when out of space
f2fs: compress: relocate some judgments in f2fs_reserve_compress_blocks
f2fs: add a proc entry show disk layout
f2fs: introduce SEGS_TO_BLKS/BLKS_TO_SEGS for cleanup
f2fs: fix to check return value of f2fs_gc_range
f2fs: fix to check return value __allocate_new_segment
f2fs: fix to do sanity check in update_sit_entry
f2fs: fix to reset fields for unloaded curseg
f2fs: clean up new_curseg()
f2fs: relocate f2fs_precache_extents() in f2fs_swap_activate()
f2fs: fix blkofs_end correctly in f2fs_migrate_blocks()
f2fs: ro: don't start discard thread for readonly image
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Amir Goldstein:
"Only minor fixes:
- Fix uncalled for WARN_ON from v6.8-rc1
- Fix the overlayfs MAINTAINERS entry"
* tag 'ovl-fixes-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: relax WARN_ON in ovl_verify_area()
MAINTAINERS: update overlayfs git tree
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"This contains a few small fixes for this merge window:
- Undo the hiding of silly-rename files in afs. If they're hidden
they can't be deleted by rm manually anymore causing regressions
- Avoid caching the preferred address for an afs server to avoid
accidently overriding an explicitly specified preferred server
address
- Fix bad stat() and rmdir() interaction in afs
- Take a passive reference on the superblock when opening a block
device so the holder is available to concurrent callers from the
block layer
- Clear private data pointer in fscache_begin_operation() to avoid it
being falsely treated as valid"
* tag 'vfs-6.9-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fscache: Fix error handling in fscache_begin_operation()
fs,block: get holder during claim
afs: Fix occasional rmdir-then-VNOVNODE with generic/011
afs: Don't cache preferred address
afs: Revert "afs: Hide silly-rename files from userspace"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"A RISC-V irqchip driver fix"
* tag 'irq-urgent-2024-03-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-intc: Fix use of AIA interrupts 32-63 on riscv32
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Two regression fixes that had been introduced in this merge window,
additional HD-audio quirks, and a further enhancement for the new
kunit"
* tag 'sound-fix-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: core: add kunitconfig
ALSA: hda/realtek: add in quirk for Acer Swift Go 16 - SFG16-71
Revert "ALSA: usb-audio: Name feature ctl using output if input is PCM"
ALSA: timer: Fix missing irq-disable at closing
ALSA: hda/realtek: Add quirk for Lenovo Yoga 9 14IMH9
|
|
The __string() helper macro of the TRACE_EVENT() macro is used to
determine how much of the ring buffer needs to be allocated to fit the
given source string. Some trace events have a string that is dependent on
another variable that could be NULL, and in those cases the string is
passed in to be NULL.
The __string() macro can handle being passed in a NULL pointer for which
it will turn it into "(null)". It does that with:
strlen((src) ? (const char *)(src) : "(null)") + 1
But if src itself has the same conditional type it can confuse the
compiler. That is:
__string(r ? dev(r)->name : NULL)
Would turn into:
strlen((r ? dev(r)->name : NULL) ? (r ? dev(r)->name : NULL) : "(null)" + 1
For which the compiler thinks that NULL is being passed to strlen() and
gives this kind of warning:
./include/trace/stages/stage5_get_offsets.h:50:21: warning: argument 1 null where non-null expected [-Wnonnull]
50 | strlen((src) ? (const char *)(src) : "(null)") + 1)
Instead, create a static inline function that takes the src string and
will return the string if it is not NULL and will return "(null)" if it
is. This will then make the strlen() line:
strlen(__string_src(src)) + 1
Where the compiler can see that strlen() will not end up with NULL and
does not warn about it.
Note that this depends on commit 51270d573a8d ("tracing/net_sched: Fix
tracepoints that save qdisc_dev() as a string") being applied, as passing
the qdisc_dev() into __string_src() will give an error.
Link: https://lore.kernel.org/all/ZfNmfCmgCs4Nc+EH@aschofie-mobl2/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Reported-by: Alison Schofield <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The WARN_ON() check in __assign_str() to catch where the source variable
to the macro doesn't match the source variable to __string() gives an
error in clang:
>> include/trace/events/sunrpc.h:703:4: warning: result of comparison against a string literal is unspecified (use an explicit string comparison function instead) [-Wstring-compare]
670 | __assign_str(progname, "unknown");
That's because the __assign_str() macro has:
WARN_ON_ONCE((src) != __data_offsets.dst##_ptr_);
Where "src" is a string literal. Clang warns when comparing a string
literal directly as it is undefined to what the value of the literal is.
Since this is still to make sure the same string that goes to __string()
is the same as __assign_str(), for string literals do a test for that and
then use strcmp() in those cases
Note that this depends on commit 51270d573a8d ("tracing/net_sched: Fix
tracepoints that save qdisc_dev() as a string") being applied, as this was
what found that bug.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fixes: 433e1d88a3be ("tracing: Add warning if string in __assign_str() does not match __string()")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
There are two WARN_ON*() warnings in tracepoint.h that deal with RCU
usage. But when they trigger, especially from using a TRACE_EVENT()
macro, the information is not very helpful and is confusing:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at include/trace/events/lock.h:24 lock_acquire+0x2b2/0x2d0
Where the above warning takes you to:
TRACE_EVENT(lock_acquire, <<<--- line 24 in lock.h
TP_PROTO(struct lockdep_map *lock, unsigned int subclass,
int trylock, int read, int check,
struct lockdep_map *next_lock, unsigned long ip),
[..]
Change the WARN_ON_ONCE() to WARN_ONCE() and add a string that allows
someone to search for exactly where the bug happened.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Reported-by: Borislav Petkov <[email protected]>
Tested-by: Borislav Petkov (AMD) <[email protected]>
Reviewed-by: Paul E. McKenney <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Fixes Coccinelle/coccicheck warnings reported by do_div.cocci.
Compared to do_div(), div64_u64() does not implicitly cast the divisor and
does not unnecessarily calculate the remainder.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Mathieu Desnoyers <[email protected]>
Signed-off-by: Thorsten Blum <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Currently ftrace only dumps the global trace buffer on an OOPs. For
debugging a production usecase, instance trace will be helpful to
check specific problems since global trace buffer may be used for
other purposes.
This patch extend the ftrace_dump_on_oops parameter to dump a specific
or multiple trace instances:
- ftrace_dump_on_oops=0: as before -- don't dump
- ftrace_dump_on_oops[=1]: as before -- dump the global trace buffer
on all CPUs
- ftrace_dump_on_oops=2 or =orig_cpu: as before -- dump the global
trace buffer on CPU that triggered the oops
- ftrace_dump_on_oops=<instance_name>: new behavior -- dump the
tracing instance matching <instance_name>
- ftrace_dump_on_oops[=2/orig_cpu],<instance1_name>[=2/orig_cpu],
<instrance2_name>[=2/orig_cpu]: new behavior -- dump the global trace
buffer and multiple instance buffer on all CPUs, or only dump on CPU
that triggered the oops if =2 or =orig_cpu is given
Also, the sysctl node can handle the input accordingly.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Ross Zwisler <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Cc: <[email protected]>
Signed-off-by: Huang Yiwei <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The second parameter of __assign_rel_str() is no longer used. It can be removed.
Note, the only real users of rel_string is user events. This code is just
in the sample code for testing purposes.
This makes __assign_rel_str() different than __assign_str() but that's
fine. __assign_str() is used over 700 places and has a larger impact. That
change will come later.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Mathieu Desnoyers <[email protected]>
Reviewed-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
In preparation to remove the second parameter of __assign_str(), make sure
it is really a duplicate of __string() by adding a WARN_ON_ONCE().
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Mathieu Desnoyers <[email protected]>
Reviewed-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
There's no example code that uses __string_len(), and since the sample
code is used for testing the event logic, add a use case.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Now that __assign_str() gets the length from the __string() (and
__string_len()) macros, there's no reason to have a separate
__assign_str_len() macro as __assign_str() can get the length of the
string needed.
Also remove __assign_rel_str() although it had no users anyway.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Jeff Layton <[email protected]>
Acked-by: Chuck Lever <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Reduce the number of kernel-doc warnings from 52 down to 10, i.e.,
fix 42 kernel-doc warnings by (a) using the Returns: format for
function return values or (b) using "@var:" instead of "@var -"
for function parameter descriptions.
Fix one return values list so that it is formatted correctly when
rendered for output.
Spell "non-zero" with a hyphen in several places.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Mathieu Desnoyers <[email protected]>
Cc: Mark Rutland <[email protected]>
Link: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Reported-by: kernel test robot <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Running the ftrace selftests caused the ring buffer mapping test to fail.
Investigating, I found that the snapshot counter would be incremented
every time a snapshot trigger was added, even if that snapshot trigger
failed.
# cd /sys/kernel/tracing
# echo "snapshot" > events/sched/sched_process_fork/trigger
# echo "snapshot" > events/sched/sched_process_fork/trigger
-bash: echo: write error: File exists
That second one that fails increments the snapshot counter but doesn't
decrement it. It needs to be decremented when the snapshot fails.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Vincent Donnefort <[email protected]>
Fixes: 16f7e48ffc53a ("tracing: Add snapshot refcount")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Running the ftrace selftests caused the ring buffer mapping test to fail.
Investigating, I found that the snapshot counter would be incremented
every time a tracer that uses the snapshot is enabled even if the snapshot
was used by the previous tracer.
That is:
# cd /sys/kernel/tracing
# echo wakeup_rt > current_tracer
# echo wakeup_dl > current_tracer
# echo nop > current_tracer
would leave the snapshot counter at 1 and not zero. That's because the
enabling of wakeup_dl would increment the counter again but the setting
the tracer to nop would only decrement it once.
Do not arm the snapshot for a tracer if the previous tracer already had it
armed.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Vincent Donnefort <[email protected]>
Fixes: 16f7e48ffc53a ("tracing: Add snapshot refcount")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The TRACE_EVENT macros has some dependency if a __string() field is NULL,
where it will save "(null)" as the string. This string is also used by
__assign_str(). It's better to create a single macro instead of having
something that will not be caught by the compiler if there is an
unfortunate typo.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Chuck Lever <[email protected]>
Suggested-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
Instead of having:
#define __assign_str(dst, src) \
memcpy(__get_str(dst), __data_offsets.dst##_ptr_ ? \
__data_offsets.dst##_ptr_ : "(null)", \
__get_dynamic_array_len(dst))
Use the ? : shortcut and compact it down to:
#define __assign_str(dst, src) \
memcpy(__get_str(dst), __data_offsets.dst##_ptr_ ? : "(null)", \
__get_dynamic_array_len(dst))
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Chuck Lever <[email protected]>
Suggested-by: Mathieu Desnoyers <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The TRACE_EVENT() macro handles dynamic strings by having:
TP_PROTO(struct some_struct *s),
TP_ARGS(s),
TP_STRUCT__entry(
__string(my_string, s->string)
),
TP_fast_assign(
__assign_str(my_string, s->string);
)
TP_printk("%s", __get_str(my_string))
There's even some code that may call a function helper to find the
s->string value. The problem with the above is that the work to get the
s->string is done twice. Once at the __string() and again in the
__assign_str().
The length of the string is calculated via a strlen(), not once, but
twice. Once during the __string() macro and again in __assign_str(). But
the length is actually already recorded in the data location and here's no
reason to call strlen() again.
Just use the saved length that was saved in the __string() code for the
__assign_str() code.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Chuck Lever <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
string
The TRACE_EVENT() macro handles dynamic strings by having:
TP_PROTO(struct some_struct *s),
TP_ARGS(s),
TP_STRUCT__entry(
__string(my_string, s->string)
),
TP_fast_assign(
__assign_str(my_string, s->string);
)
TP_printk("%s", __get_str(my_string))
There's even some code that may call a function helper to find the
s->string value. The problem with the above is that the work to get the
s->string is done twice. Once at the __string() and again in the
__assign_str().
But the __string() uses dynamic_array() which has a helper structure that
is created holding the offsets and length of the string fields. Instead of
finding the string twice, just save it off in another field from that
helper structure, and have __assign_str() use that instead.
Note, this also means that the second parameter of __assign_str() isn't
even used anymore, and may be removed in the future.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Chuck Lever <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The TP_STRUCT__entry that gets assigned the region name, or an
empty string if no region is present, is erroneously initialized
to the cxl_region pointer. It needs to be properly initialized
otherwise it's length is wrong and garbage chars can appear in
the kernel trace output: /sys/kernel/tracing/trace
The bad initialization was due in part to a naming conflict with
the parameter: struct cxl_region *region. The field 'region' is
already exposed externally as the region name, so changing that
to something logical, like 'region_name' is not an option. Instead
rename the internal only struct cxl_region to the commonly used
'cxlr'.
Impact is that tooling depending on that trace data can miss
picking up a valid event when searching by region name. The
TP_printk() output, if enabled, does emit the correct region
names in the dmesg log.
This was found during testing of the cxl-list option to report
media-errors for a region.
Cc: Davidlohr Bueso <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Vishal Verma <[email protected]>
Cc: [email protected]
Fixes: ddf49d57b841 ("cxl/trace: Add TRACE support for CXL media-error records")
Signed-off-by: Alison Schofield <[email protected]>
Reviewed-by: Ira Weiny <[email protected]>
Acked-by: Dan Williams <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The __string() and __assign_str() helper macros of the TRACE_EVENT() macro
are going through some optimizations where only the source string of
__string() will be used and the __assign_str() source will be ignored and
later removed.
To make sure that there's no issues, a new check is added between the
__string() src argument and the __assign_str() src argument that does a
strcmp() to make sure they are the same string.
The hclgevf trace events have:
__assign_str(devname, &hdev->nic.kinfo.netdev->name);
Which triggers the warning:
hclgevf_trace.h:34:39: error: passing argument 1 of ‘strcmp’ from incompatible pointer type [-Werror=incompatible-pointer-types]
34 | __assign_str(devname, &hdev->nic.kinfo.netdev->name);
[..]
arch/x86/include/asm/string_64.h:75:24: note: expected ‘const char *’ but argument is of type ‘char (*)[16]’
75 | int strcmp(const char *cs, const char *ct);
| ~~~~~~~~~~~~^~
Because __assign_str() now has:
WARN_ON_ONCE(__builtin_constant_p(src) ? \
strcmp((src), __data_offsets.dst##_ptr_) : \
(src) != __data_offsets.dst##_ptr_); \
The problem is the '&' on hdev->nic.kinfo.netdev->name. That's because
that name is:
char name[IFNAMSIZ]
Where passing an address '&' of a char array is not compatible with strcmp().
The '&' is not necessary, remove it.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: netdev <[email protected]>
Cc: Yisen Zhuang <[email protected]>
Cc: Salil Mehta <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Yufeng Mo <[email protected]>
Cc: Huazhong Tan <[email protected]>
Cc: [email protected]
Acked-by: Paolo Abeni <[email protected]>
Reviewed-by: Jijie Shao <[email protected]>
Fixes: d8355240cf8fb ("net: hns3: add trace event support for PF/VF mailbox")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|