aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-01-14net: sit: unregister_netdevice on newlink's error pathJakub Kicinski1-1/+4
We need to unregister the netdevice if config failed. .ndo_uninit takes care of most of the heavy lifting. This was uncovered by recent commit c269a24ce057 ("net: make free_netdev() more lenient with unregistering devices"). Previously the partially-initialized device would be left in the system. Reported-and-tested-by: [email protected] Fixes: e2f1f072db8d ("sit: allow to configure 6rd tunnels via netlink") Acked-by: Nicolas Dichtel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-14iwlwifi: dbg: Don't touch the tlv dataTakashi Iwai1-7/+0
The commit ba8f6f4ae254 ("iwlwifi: dbg: add dumping special device memory") added a termination of name string just to be sure, and this seems causing a regression, a GPF triggered at firmware loading. Basically we shouldn't modify the firmware data that may be provided as read-only. This patch drops the code that caused the regression and keep the tlv data as is. Fixes: ba8f6f4ae254 ("iwlwifi: dbg: add dumping special device memory") BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1180344 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210733 Cc: [email protected] Signed-off-by: Takashi Iwai <[email protected]> Acked-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-14RDMA/cma: Fix error flow in default_roce_mode_storeNeta Ostrovsky1-1/+3
In default_roce_mode_store(), we took a reference to cma_dev, but didn't return it with cma_dev_put in the error flow. Fixes: 1c15b4f2a42f ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neta Ostrovsky <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-01-14RDMA/mlx5: Fix wrong free of blue flame register on errorMark Bloch1-1/+1
If the allocation of the fast path blue flame register fails, the driver should free the regular blue flame register allocated a statement above, not the one that it just failed to allocate. Fixes: 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages") Link: https://lore.kernel.org/r/[email protected] Reported-by: Hans Petter Selasky <[email protected]> Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-01-14IB/mlx5: Fix error unwinding when set_has_smi_cap failsParav Pandit1-1/+1
When set_has_smi_cap() fails, multiport master cleanup is missed. Fix it by doing the correct error unwinding goto. Fixes: a989ea01cb10 ("RDMA/mlx5: Move SMI caps logic") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Parav Pandit <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-01-14RDMA/umem: Avoid undefined behavior of rounddown_pow_of_two()Aharon Landau1-1/+1
rounddown_pow_of_two() is undefined when the input is 0. Therefore we need to avoid it in ib_umem_find_best_pgsz and return 0. Otherwise, it could result in not rejecting an invalid page size which eventually causes a kernel oops due to the logical inconsistency. Fixes: 3361c29e9279 ("RDMA/umem: Use simpler logic for ib_umem_find_best_pgsz()") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Aharon Landau <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-01-14mt76: Fix queue ID variable types after mcu queue splitNathan Chancellor2-6/+6
Clang warns in both mt7615 and mt7915: drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:271:9: warning: implicit conversion from enumeration type 'enum mt76_mcuq_id' to different enumeration type 'enum mt76_txq_id' [-Wenum-conversion] txq = MT_MCUQ_FWDL; ~ ^~~~~~~~~~~~ drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:278:9: warning: implicit conversion from enumeration type 'enum mt76_mcuq_id' to different enumeration type 'enum mt76_txq_id' [-Wenum-conversion] txq = MT_MCUQ_WA; ~ ^~~~~~~~~~ drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:282:9: warning: implicit conversion from enumeration type 'enum mt76_mcuq_id' to different enumeration type 'enum mt76_txq_id' [-Wenum-conversion] txq = MT_MCUQ_WM; ~ ^~~~~~~~~~ 3 warnings generated. drivers/net/wireless/mediatek/mt76/mt7615/mcu.c:238:9: warning: implicit conversion from enumeration type 'enum mt76_mcuq_id' to different enumeration type 'enum mt76_txq_id' [-Wenum-conversion] qid = MT_MCUQ_WM; ~ ^~~~~~~~~~ drivers/net/wireless/mediatek/mt76/mt7615/mcu.c:240:9: warning: implicit conversion from enumeration type 'enum mt76_mcuq_id' to different enumeration type 'enum mt76_txq_id' [-Wenum-conversion] qid = MT_MCUQ_FWDL; ~ ^~~~~~~~~~~~ 2 warnings generated. Use the proper type for the queue ID variables to fix these warnings. Additionally, rename the txq variable in mt7915_mcu_send_message to be more neutral like mt7615_mcu_send_message. Fixes: e637763b606b ("mt76: move mcu queues to mt76_dev q_mcu array") Link: https://github.com/ClangBuiltLinux/linux/issues/1229 Signed-off-by: Nathan Chancellor <[email protected]> Acked-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-14x86/entry: Emit a symbol for register restoring thunkNick Desaulniers3-4/+14
Arnd found a randconfig that produces the warning: arch/x86/entry/thunk_64.o: warning: objtool: missing symbol for insn at offset 0x3e when building with LLVM_IAS=1 (Clang's integrated assembler). Josh notes: With the LLVM assembler not generating section symbols, objtool has no way to reference this code when it generates ORC unwinder entries, because this code is outside of any ELF function. The limitation now being imposed by objtool is that all code must be contained in an ELF symbol. And .L symbols don't create such symbols. So basically, you can use an .L symbol *inside* a function or a code segment, you just can't use the .L symbol to contain the code using a SYM_*_START/END annotation pair. Fangrui notes that this optimization is helpful for reducing image size when compiling with -ffunction-sections and -fdata-sections. I have observed on the order of tens of thousands of symbols for the kernel images built with those flags. A patch has been authored against GNU binutils to match this behavior of not generating unused section symbols ([1]), so this will also become a problem for users of GNU binutils once they upgrade to 2.36. Omit the .L prefix on a label so that the assembler will emit an entry into the symbol table for the label, with STB_LOCAL binding. This enables objtool to generate proper unwind info here with LLVM_IAS=1 or GNU binutils 2.36+. [ bp: Massage commit message. ] Reported-by: Arnd Bergmann <[email protected]> Suggested-by: Josh Poimboeuf <[email protected]> Suggested-by: Borislav Petkov <[email protected]> Suggested-by: Mark Brown <[email protected]> Signed-off-by: Nick Desaulniers <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Josh Poimboeuf <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Link: https://github.com/ClangBuiltLinux/linux/issues/1209 Link: https://reviews.llvm.org/D93783 Link: https://sourceware.org/binutils/docs/as/Symbol-Names.html Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1408485ce69f844dcd7ded093a8 [1]
2021-01-14mtd: spinand: Fix MTD_OPS_AUTO_OOB requestsMiquel Raynal1-3/+11
The initial change breaking the logic is commit 3d1f08b032dc ("mtd: spinand: Use the external ECC engine logic") It inadvertently dropped proper OOB support while doing something else. Shortly later, half of it got re-integrated by commit 868cbe2a6dce ("mtd: spinand: Fix OOB read") (pointing by the way to a more early change which had nothing to do with the issue). Problem is, this commit failed to revert the faulty change entirely and missed the logic handling MTD_OPS_AUTO_OOB requests. Let's fix this mess by re-inserting the missing part now. Fixes: 868cbe2a6dce ("mtd: spinand: Fix OOB read") Reported-by: Felix Fietkau <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-01-14mtd: rawnand: intel: check the mtd name only after setting the variableMartin Blumenstingl1-2/+3
Move the check for mtd->name after the mtd variable has actually been initialized. While here, also drop the NULL assignment to the mtd variable as it's overwritten later on anyways and the NULL value is never read. Fixes: 0b1039f016e8a3 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC") Signed-off-by: Martin Blumenstingl <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-01-14mtd: rawnand: nandsim: Fix the logic when selecting Hamming soft ECC engineMiquel Raynal1-4/+3
I have been fooled by the logic picking the right ECC engine which is spread across two functions: *init_module() and *_attach(). I thought this driver was not impacted by the recent changes around the ECC engines DT parsing logic but in fact it is. Reported-by: kernel test robot <[email protected]> Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits") Cc: [email protected] Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-01-14tools/bootconfig: Add tracing_on support to helper scriptsMasami Hiramatsu2-0/+5
Add ftrace.instance.INSTANCE.tracing_on support to ftrace2bconf.sh and bconf2ftrace.sh. commit 8490db06f914 ("tracing/boot: Add per-instance tracing_on option support") added the per-instance tracing_on option, but forgot to update the helper scripts. Link: https://lkml.kernel.org/r/160749166410.3497930.14204335886811029800.stgit@devnote2 Cc: [email protected] Fixes: 8490db06f914 ("tracing/boot: Add per-instance tracing_on option support") Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-01-14dm crypt: defer decryption to a tasklet if interrupts disabledIgnat Korchagin1-2/+6
On some specific hardware on early boot we occasionally get: [ 1193.920255][ T0] BUG: sleeping function called from invalid context at mm/mempool.c:381 [ 1193.936616][ T0] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/69 [ 1193.953233][ T0] no locks held by swapper/69/0. [ 1193.965871][ T0] irq event stamp: 575062 [ 1193.977724][ T0] hardirqs last enabled at (575061): [<ffffffffab73f662>] tick_nohz_idle_exit+0xe2/0x3e0 [ 1194.002762][ T0] hardirqs last disabled at (575062): [<ffffffffab74e8af>] flush_smp_call_function_from_idle+0x4f/0x80 [ 1194.029035][ T0] softirqs last enabled at (575050): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20 [ 1194.054227][ T0] softirqs last disabled at (575043): [<ffffffffad600fd2>] asm_call_irq_on_stack+0x12/0x20 [ 1194.079389][ T0] CPU: 69 PID: 0 Comm: swapper/69 Not tainted 5.10.6-cloudflare-kasan-2021.1.4-dev #1 [ 1194.104103][ T0] Hardware name: NULL R162-Z12-CD/MZ12-HD4-CD, BIOS R10 06/04/2020 [ 1194.119591][ T0] Call Trace: [ 1194.130233][ T0] dump_stack+0x9a/0xcc [ 1194.141617][ T0] ___might_sleep.cold+0x180/0x1b0 [ 1194.153825][ T0] mempool_alloc+0x16b/0x300 [ 1194.165313][ T0] ? remove_element+0x160/0x160 [ 1194.176961][ T0] ? blk_mq_end_request+0x4b/0x490 [ 1194.188778][ T0] crypt_convert+0x27f6/0x45f0 [dm_crypt] [ 1194.201024][ T0] ? rcu_read_lock_sched_held+0x3f/0x70 [ 1194.212906][ T0] ? module_assert_mutex_or_preempt+0x3e/0x70 [ 1194.225318][ T0] ? __module_address.part.0+0x1b/0x3a0 [ 1194.237212][ T0] ? is_kernel_percpu_address+0x5b/0x190 [ 1194.249238][ T0] ? crypt_iv_tcw_ctr+0x4a0/0x4a0 [dm_crypt] [ 1194.261593][ T0] ? is_module_address+0x25/0x40 [ 1194.272905][ T0] ? static_obj+0x8a/0xc0 [ 1194.283582][ T0] ? lockdep_init_map_waits+0x26a/0x700 [ 1194.295570][ T0] ? __raw_spin_lock_init+0x39/0x110 [ 1194.307330][ T0] kcryptd_crypt_read_convert+0x31c/0x560 [dm_crypt] [ 1194.320496][ T0] ? kcryptd_queue_crypt+0x1be/0x380 [dm_crypt] [ 1194.333203][ T0] blk_update_request+0x6d7/0x1500 [ 1194.344841][ T0] ? blk_mq_trigger_softirq+0x190/0x190 [ 1194.356831][ T0] blk_mq_end_request+0x4b/0x490 [ 1194.367994][ T0] ? blk_mq_trigger_softirq+0x190/0x190 [ 1194.379693][ T0] flush_smp_call_function_queue+0x24b/0x560 [ 1194.391847][ T0] flush_smp_call_function_from_idle+0x59/0x80 [ 1194.403969][ T0] do_idle+0x287/0x450 [ 1194.413891][ T0] ? arch_cpu_idle_exit+0x40/0x40 [ 1194.424716][ T0] ? lockdep_hardirqs_on_prepare+0x286/0x3f0 [ 1194.436399][ T0] ? _raw_spin_unlock_irqrestore+0x39/0x40 [ 1194.447759][ T0] cpu_startup_entry+0x19/0x20 [ 1194.458038][ T0] secondary_startup_64_no_verify+0xb0/0xbb IO completion can be queued to a different CPU by the block subsystem as a "call single function/data". The CPU may run these routines from the idle task, but it does so with interrupts disabled. It is not a good idea to do decryption with irqs disabled even in an idle task context, so just defer it to a tasklet (as is done with requests from hard irqs). Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Cc: [email protected] # v5.9+ Signed-off-by: Ignat Korchagin <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2021-01-14spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->modeChristophe Leroy1-3/+2
Commit 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") broke fsl spi driver. As now we fully rely on gpiolib for handling the polarity of chip selects, the driver shall not alter the GPIO value anymore when SPI_CS_HIGH is not set in spi->mode. Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors") Cc: [email protected] Signed-off-by: Christophe Leroy <[email protected]> Link: https://lore.kernel.org/r/6b51cc2bfbca70d3e9b9da7b7aa4c7a9d793ca0e.1610629002.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown <[email protected]>
2021-01-14ALSA: hda/via: Add minimum mute flagTakashi Iwai1-0/+1
It turned out that VIA codecs also mute the sound in the lowest mixer level. Turn on the dac_min_mute flag to indicate the mute-as-minimum in TLV like already done in Conexant and IDT codecs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210559 Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-01-14HID: logitech-hidpp: Add product ID for MX Ergo in Bluetooth modeNicholas Miell1-0/+2
The Logitech MX Ergo trackball supports HID++ 4.5 over Bluetooth. Add its product ID to the table so we can get battery monitoring support. (The hid-logitech-hidpp driver already recognizes it when connected via a Unifying Receiver.) [[email protected]: fix whitespace damage] Signed-off-by: Nicholas Miell <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2021-01-14Documentation: ACPI: EINJ: Fix error type values for PCIe errorsQiuxu Zhuo1-2/+2
Fix the error type value for PCI Express uncorrectable non-fatal error to 0x00000080 and fix the error type value for PCI Express uncorrectable fatal error to 0x00000100. See Advanced Configuration and Power Interface Specification, version 6.2, table "18-409 Error Type Definition". Signed-off-by: Qiuxu Zhuo <[email protected]> Reported-by: Lijian Zhao <[email protected]> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-14ALSA: hda/realtek - Limit int mic boost on Acer Aspire E5-575TChris Chiu1-0/+8
The Acer Apire E5-575T laptop with codec ALC255 has a terrible background noise comes from internal mic capture. And the jack sensing dose not work for headset like some other Acer laptops. This patch limits the internal mic boost on top of the existing ALC255_FIXUP_ACER_MIC_NO_PRESENCE quirk for Acer Aspire E5-575T. Signed-off-by: Chris Chiu <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-01-14x86/topology: Make __max_die_per_package available unconditionallyBorislav Petkov2-3/+3
Move it outside of CONFIG_SMP in order to avoid ifdeffery at the usage sites. Fixes: 76e2fc63ca40 ("x86/cpu/amd: Set __max_die_per_package on AMD") Reported-by: Stephen Rothwell <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-01-14KVM: arm64: Use the reg_to_encoding() macro instead of sys_reg()Alexandru Elisei1-10/+7
The reg_to_encoding() macro is a wrapper over sys_reg() and conveniently takes a sys_reg_desc or a sys_reg_params argument and returns the 32 bit register encoding. Use it instead of calling sys_reg() directly. Signed-off-by: Alexandru Elisei <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-14KVM: arm64: Allow PSCI SYSTEM_OFF/RESET to returnDavid Brazdil1-8/+5
The KVM/arm64 PSCI relay assumes that SYSTEM_OFF and SYSTEM_RESET should not return, as dictated by the PSCI spec. However, there is firmware out there which breaks this assumption, leading to a hyp panic. Make KVM more robust to broken firmware by allowing these to return. Signed-off-by: David Brazdil <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-14KVM: arm64: Simplify handling of absent PMU system registersMarc Zyngier1-7/+1
Now that all PMU registers are gated behind a .visibility callback, remove the other checks against an absent PMU. Signed-off-by: Marc Zyngier <[email protected]>
2021-01-14KVM: arm64: Hide PMU registers from userspace when not availableMarc Zyngier1-20/+48
It appears that while we are now able to properly hide PMU registers from the guest when a PMU isn't available (either because none has been configured, the host doesn't have the PMU support compiled in, or that the HW doesn't have one at all), we are still exposing more than we should to userspace. Introduce a visibility callback gating all the PMU registers, which covers both usrespace and guest. Signed-off-by: Marc Zyngier <[email protected]>
2021-01-14USB: gadget: dummy-hcd: Fix errors in port-reset handlingAlan Stern1-3/+7
Commit c318840fb2a4 ("USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug") messed up the way dummy-hcd handles requests to turn on the RESET port feature (I didn't notice that the original switch case ended with a fallthrough). The call to set_link_state() was inadvertently removed, as was the code to set the USB_PORT_STAT_RESET flag when the speed is USB2. In addition, the original code never checked whether the port was connected before handling the port-reset request. There was a check for the port being powered, but it was removed by that commit! In practice this doesn't matter much because the kernel doesn't try to reset disconnected ports, but it's still bad form. This patch fixes these problems by changing the fallthrough to break, adding back in the missing set_link_state() call, setting the port-reset status flag, adding a port-is-connected test, and removing a redundant assignment statement. Fixes: c318840fb2a4 ("USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug") CC: <[email protected]> Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-14drm/amdgpu: add new device id for Reniormengwang2-1/+3
add DID 0x164C into pciidlist under CHIP_RENOIR family. Signed-off-by: mengwang <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.10.x
2021-01-14drm/amdgpu: add green_sardine device id (v2)Prike Liang1-0/+1
Add green_sardine PCI id support and map it to renoir asic type. v2: add apu flag Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.10.x
2021-01-14drm/amdgpu: fix vram type and bandwidth error for DDR5 and DDR4Huang Rui1-17/+36
This patch is to update atomfirmware parser for the memory type and bandwidth of DDR5 and DDR4. Signed-off-by: Huang Rui <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-14drm/amdgpu/gfx10: add updated GOLDEN_TSC_COUNT_UPPER/LOWER register offsets ↵chen gong1-2/+14
for VGH The address of the GOLDEN_TSC_COUNT_UPPER/GOLDEN_TSC_COUNT_LOWER for Vnagogh are different from the others. The offset of the GOLDEN_TSC_COUNT_UPPER for Vangogh is 0x0025 by calculation. The offset of the GOLDEN_TSC_COUNT_LOWER for Vangogh is 0x0026 by calculation. Signed-off-by: chen gong <[email protected]> Acked-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-14drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu()Jeremy Cline1-4/+7
KASAN reported a slab-out-of-bounds read of size 1 in kdf_create_vcrat_image_cpu(). This occurs when, for example, when on an x86_64 with a single NUMA node because kfd_fill_iolink_info_for_cpu() is a no-op, but afterwards the sub_type_hdr->length, which is out-of-bounds, is read and multiplied by entries. Fortunately, entries is 0 in this case so the overall crat_table->length is still correct. Check if there were any entries before de-referencing sub_type_hdr which may be pointing to out-of-bounds memory. Fixes: b7b6c38529c9 ("drm/amdkfd: Calculate CPU VCRAT size dynamically (v2)") Suggested-by: Felix Kuehling <[email protected]> Signed-off-by: Jeremy Cline <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-14Revert "drm/amd/display: Fixed Intermittent blue screen on OLED panel"Rodrigo Siqueira1-5/+6
commit a861736dae64 ("drm/amd/display: Fixed Intermittent blue screen on OLED panel") causes power regression for many users. It seems that this change causes the MCLK to get forced high; this creates a regression for many users since their devices were not able to drop to a low state after this change. For this reason, this reverts commit a861736dae644a0d7abbca0c638ae6aad28feeb8. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1407 Cc: Aurabindo Pillai <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Naveed Ashfaq <[email protected]> Cc: Hersen Wu <[email protected]> Cc: Roman Li <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-01-14drm/amd/display: disable dcn10 pipe split by defaultLi, Roman1-2/+2
[Why] The initial purpose of dcn10 pipe split is to support some high bandwidth mode which requires dispclk greater than max dispclk. By initial bring up power measurement data, it showed power consumption is less with pipe split for dcn block. This could be reason for enable pipe split by default. By battery life measurement of some Chromebooks, result shows battery life is longer with pipe split disabled. [How] Disable pipe split by default. Pipe split could be still enabled when required dispclk is greater than max dispclk. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Hersen Wu <[email protected]> Signed-off-by: Roman Li <[email protected]> Reviewed-by: Roman Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-14drm/amd/display: Add a missing DCN3.01 API mappingNikola Cornij1-0/+1
[why] Required for DSC MST Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Nikola Cornij <[email protected]> Reviewed-by: Zhan Liu <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-14drm/amd/display: Initialize stack variableWesley Chalmers1-1/+1
[WHY] The stack variable "val" is potentially unpopulate it, so initialize it with the value 0xf (indicating an invalid mux) Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Wesley Chalmers <[email protected]> Reviewed-by: Martin Leung <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-14drm/amd/display: NULL pointer hangQingqing Zhuo1-1/+7
[Why] In dc_link_dp_set_test_pattern, we assume all pipes have a stream, which can cause null pointer dereference. [How] Add a null pointer check before accessing stream. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Qingqing Zhuo <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-14drm/amdgpu/psp: fix psp gfx ctrl cmdsVictor Zhao1-1/+1
psp GFX_CTRL_CMD_ID_CONSUME_CMD different for windows and linux, according to psp, linux cmds are not correct. v2: only correct GFX_CTRL_CMD_ID_CONSUME_CMD. Signed-off-by: Victor Zhao <[email protected]> Reviewed-by: Emily.Deng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-14drm/amdgpu: fix DRM_INFO flood if display core is not supported (bug 210921)Alexandre Demers1-1/+1
This fix bug 210921 where DRM_INFO floods log when hitting an unsupported ASIC in amdgpu_device_asic_has_dc_support(). This info should be only called once. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210921 Signed-off-by: Alexandre Demers <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-01-14MAINTAINERS: update radeon/amdgpu/amdkfd git treesAlex Deucher1-2/+2
FDO is out of space, so move to gitlab. Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-13riscv: defconfig: enable gpio support for HiFive UnleashedSagar Shrikant Kadam1-0/+2
Ethernet phy VSC8541-01 on HiFive Unleashed has its reset line connected to a gpio, so enable GPIO driver's required to reset the phy. Signed-off-by: Sagar Shrikant Kadam <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2021-01-13dts: phy: add GPIO number and active state used for phy resetSagar Shrikant Kadam1-0/+1
The GEMGXL_RST line on HiFive Unleashed is pulled low and is using GPIO number 12. Add these reset-gpio details to dt-node using which the linux phylib can reset the phy. Signed-off-by: Sagar Shrikant Kadam <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2021-01-13dts: phy: fix missing mdio device and probe failure of vsc8541-01 deviceSagar Shrikant Kadam1-0/+1
HiFive unleashed A00 board has VSC8541-01 ethernet phy, this device is identified as a Revision B device as described in device identification registers. In order to use this phy in the unmanaged mode, it requires a specific reset sequence of logical 0-1-0-1 transition on the NRESET pin as documented here [1]. Currently, the bootloader (fsbl or u-boot-spl) takes care of the phy reset. If due to some reason the phy device hasn't received the reset by the prior stages before the linux macb driver comes into the picture, the MACB mii bus gets probed but the mdio scan fails and is not even able to read the phy ID registers. It gives an error message: "libphy: MACB_mii_bus: probed mdio_bus 10090000.ethernet-ffffffff: MDIO device at address 0 is missing." Thus adding the device OUI (Organizationally Unique Identifier) to the phy device node helps to probe the phy device. [1]: VSC8541-01 datasheet: https://www.mouser.com/ds/2/523/Microsemi_VSC8541-01_Datasheet_10496_V40-1148034.pdf Signed-off-by: Sagar Shrikant Kadam <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2021-01-14powerpc/vdso: Fix clock_gettime_fallback for vdso32Andreas Schwab1-1/+15
The second argument of __kernel_clock_gettime64 points to a struct __kernel_timespec, with 64-bit time_t, so use the clock_gettime64 syscall in the fallback function for the 32-bit VDSO. Similarly, clock_getres_fallback should use the clock_getres_time64 syscall, though it isn't yet called from the 32-bit VDSO. Fixes: d0e3fc69d00d ("powerpc/vdso: Provide __kernel_clock_gettime64() on vdso32") Signed-off-by: Andreas Schwab <[email protected]> [chleroy: Moved into a single #ifdef __powerpc64__ block] Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/0c0ab0eb3cc80687c326f76ff0dd5762b8812ecc.1610452505.git.christophe.leroy@csgroup.eu
2021-01-13riscv: Fix KASAN memory mapping.Nick Hu1-2/+2
Use virtual address instead of physical address when translating the address to shadow memory by kasan_mem_to_shadow(). Signed-off-by: Nick Hu <[email protected]> Signed-off-by: Nylon Chen <[email protected]> Fixes: b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2021-01-13net: stmmac: Fixed mtu channged by cache alignedDavid Wu1-1/+2
Since the original mtu is not used when the mtu is updated, the mtu is aligned with cache, this will get an incorrect. For example, if you want to configure the mtu to be 1500, but mtu 1536 is configured in fact. Fixed: eaf4fac478077 ("net: stmmac: Do not accept invalid MTU values") Signed-off-by: David Wu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-13selftests/bpf: Add verifier test for PTR_TO_MEM spillGilad Reti2-1/+41
Add a test to check that the verifier is able to recognize spilling of PTR_TO_MEM registers, by reserving a ringbuf buffer, forcing the spill of a pointer holding the buffer address to the stack, filling it back in from the stack and writing to the memory area pointed by it. The patch was partially contributed by CyberArk Software, Inc. Signed-off-by: Gilad Reti <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Acked-by: KP Singh <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-13bpf: Support PTR_TO_MEM{,_OR_NULL} register spillingGilad Reti1-0/+2
Add support for pointer to mem register spilling, to allow the verifier to track pointers to valid memory addresses. Such pointers are returned for example by a successful call of the bpf_ringbuf_reserve helper. The patch was partially contributed by CyberArk Software, Inc. Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") Suggested-by: Yonghong Song <[email protected]> Signed-off-by: Gilad Reti <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: KP Singh <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-13cxgb4/chtls: Fix tid stuck due to wrong update of qidAyush Sawal4-2/+82
TID stuck is seen when there is a race in CPL_PASS_ACCEPT_RPL/CPL_ABORT_REQ and abort is arriving before the accept reply, which sets the queue number. In this case HW ends up sending CPL_ABORT_RPL_RSS to an incorrect ingress queue. V1->V2: - Removed the unused variable len in chtls_set_quiesce_ctrl(). V2->V3: - As kfree_skb() has a check for null skb, so removed this check before calling kfree_skb() in func chtls_send_reset(). Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Rohit Maheshwari <[email protected]> Signed-off-by: Ayush Sawal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-13i40e: fix potential NULL pointer dereferencingCristian Dumitrescu1-1/+1
Currently, the function i40e_construct_skb_zc only frees the input xdp buffer when the output skb is successfully built. On error, the function i40e_clean_rx_irq_zc does not commit anything for the current packet descriptor and simply exits the packet descriptor processing loop, with the plan to restart the processing of this descriptor on the next invocation. Therefore, on error the ring next-to-clean pointer should not advance, the xdp i.e. *bi buffer should not be freed and the current buffer info should not be invalidated by setting *bi to NULL. Therefore, the *bi should only be set to NULL when the function i40e_construct_skb_zc is successful, otherwise a NULL *bi will be dereferenced when the work for the current descriptor is eventually restarted. Fixes: 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Signed-off-by: Cristian Dumitrescu <[email protected]> Acked-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-13bpf: Reject too big ctx_size_in for raw_tp test runSong Liu1-1/+2
syzbot reported a WARNING for allocating too big memory: WARNING: CPU: 1 PID: 8484 at mm/page_alloc.c:4976 __alloc_pages_nodemask+0x5f8/0x730 mm/page_alloc.c:5011 Modules linked in: CPU: 1 PID: 8484 Comm: syz-executor862 Not tainted 5.11.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__alloc_pages_nodemask+0x5f8/0x730 mm/page_alloc.c:4976 Code: 00 00 0c 00 0f 85 a7 00 00 00 8b 3c 24 4c 89 f2 44 89 e6 c6 44 24 70 00 48 89 6c 24 58 e8 d0 d7 ff ff 49 89 c5 e9 ea fc ff ff <0f> 0b e9 b5 fd ff ff 89 74 24 14 4c 89 4c 24 08 4c 89 74 24 18 e8 RSP: 0018:ffffc900012efb10 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff9200025df66 RCX: 0000000000000000 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000140dc0 RBP: 0000000000140dc0 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff81b1f7e1 R11: 0000000000000000 R12: 0000000000000014 R13: 0000000000000014 R14: 0000000000000000 R15: 0000000000000000 FS: 000000000190c880(0000) GS:ffff8880b9e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f08b7f316c0 CR3: 0000000012073000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: alloc_pages_current+0x18c/0x2a0 mm/mempolicy.c:2267 alloc_pages include/linux/gfp.h:547 [inline] kmalloc_order+0x2e/0xb0 mm/slab_common.c:837 kmalloc_order_trace+0x14/0x120 mm/slab_common.c:853 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:682 [inline] bpf_prog_test_run_raw_tp+0x4b5/0x670 net/bpf/test_run.c:282 bpf_prog_test_run kernel/bpf/syscall.c:3120 [inline] __do_sys_bpf+0x1ea9/0x4f10 kernel/bpf/syscall.c:4398 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x440499 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffe1f3bfb18 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440499 RDX: 0000000000000048 RSI: 0000000020000600 RDI: 000000000000000a RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401ca0 R13: 0000000000401d30 R14: 0000000000000000 R15: 0000000000000000 This is because we didn't filter out too big ctx_size_in. Fix it by rejecting ctx_size_in that are bigger than MAX_BPF_FUNC_ARGS (12) u64 numbers. Fixes: 1b4d60ec162f ("bpf: Enable BPF_PROG_TEST_RUN for raw_tracepoint") Reported-by: [email protected] Signed-off-by: Song Liu <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-13Merge tag 'linux-can-fixes-for-5.11-20210113' of ↵Jakub Kicinski2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-01-13 The first patch is by Oliver Hartkopp for the CAn ISO-TP protocol and fixes a kernel information leak to userspace. The last patch is by Qinglang Miao for the mcp251xfd driver and fixes a NULL pointer check to work on the correct variable. * tag 'linux-can-fixes-for-5.11-20210113' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check can: isotp: isotp_getname(): fix kernel information leak ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-14soc: litex: Fix compile warning when device tree is not configuredStafford Horne1-1/+2
The test robot reported: drivers/soc/litex/litex_soc_ctrl.c:143:34: warning: unused variable 'litex_soc_ctrl_of_match' [-Wunused-const-variable] static const struct of_device_id litex_soc_ctrl_of_match[] = { ^ 1 warning generated. As per the random config device tree is not configured causing the litex_soc_ctrl_of_match match list to not be used. This would usually mean that we cannot even use this driver as it depends on device tree, but as we also have COMPILE_TEST configured we allow it. Fix the warning by surrounding the unused variable with an ifdef CONFIG_OF. Reported-by: kernel test robot <[email protected]> Signed-off-by: Stafford Horne <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.