aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-01-19sh_eth: Fix power down vs. is_opened flag orderingGeert Uytterhoeven1-2/+2
sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-19RDMA/usnic: Fix misuse of sysfs_emit_atJoe Perches1-4/+3
In commit e28bf1f03b01 ("RDMA: Convert various random sprintf sysfs _show uses to sysfs_emit") I mistakenly used len = sysfs_emit_at to overwrite the last trailing space of potentially multiple entry output. Instead use a more common style by removing the trailing space from the output formats and adding a prefixing space to the contination formats and converting the final terminating output newline from the defective len = sysfs_emit_at(buf, len, "\n"); to the now appropriate and typical len += sysfs_emit_at(buf, len, "\n"); Fixes: e28bf1f03b01 ("RDMA: Convert various random sprintf sysfs _show uses to sysfs_emit") Link: https://lore.kernel.org/r/[email protected] Reported-by: James Bottomley <[email protected]> Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-01-19Revert "RDMA/mlx5: Fix devlink deadlock on net namespace deletion"Parav Pandit3-22/+7
This reverts commit fbdd0049d98d44914fc57d4b91f867f4996c787b. Due to commit in fixes tag, netdevice events were received only in one net namespace of mlx5_core_dev. Due to this when netdevice events arrive in net namespace other than net namespace of mlx5_core_dev, they are missed. This results in empty GID table due to RDMA device being detached from its net device. Hence, revert back to receive netdevice events in all net namespaces to restore back RDMA functionality in non init_net net namespace. The deadlock will have to be addressed in another patch. Fixes: fbdd0049d98d ("RDMA/mlx5: Fix devlink deadlock on net namespace deletion") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Parav Pandit <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-01-19RDMA/hns: Use mutex instead of spinlock for ida allocationYangyang Li2-6/+7
GFP_KERNEL may cause ida_alloc_range() to sleep, but the spinlock covering this function is not allowed to sleep, so the spinlock needs to be changed to mutex. As there is a certain chance of memory allocation failure, GFP_ATOMIC is not suitable for QP allocation scenarios. Fixes: 71586dd20010 ("RDMA/hns: Create QP with selected QPN for bank load balance") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Yangyang Li <[email protected]> Signed-off-by: Weihang Li <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-01-19RDMA/vmw_pvrdma: Fix network_hdr_type reported in WCBryan Tan3-1/+22
The PVRDMA device HW interface defines network_hdr_type according to an old definition of the internal kernel rdma_network_type enum that has since changed, resulting in the wrong rdma_network_type being reported. Fix this by explicitly defining the enum used by the PVRDMA device and adding a function to convert the pvrdma_network_type to rdma_network_type enum. Cc: [email protected] # 5.10+ Fixes: 1c15b4f2a42f ("RDMA/core: Modify enum ib_gid_type and enum rdma_network_type") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Adit Ranadive <[email protected]> Signed-off-by: Bryan Tan <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-01-19net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabledTariq Toukan2-0/+8
With NETIF_F_HW_TLS_RX packets are decrypted in HW. This cannot be logically done when RXCSUM offload is off. Fixes: 14136564c8ee ("net: Add TLS RX offload feature") Signed-off-by: Tariq Toukan <[email protected]> Reviewed-by: Boris Pismenny <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-19Merge branch 'ipv4-ensure-ecn-bits-don-t-influence-source-address-validation'Jakub Kicinski2-2/+3
Guillaume Nault says: ==================== ipv4: Ensure ECN bits don't influence source address validation Functions that end up calling fib_table_lookup() should clear the ECN bits from the TOS, otherwise ECT(0) and ECT(1) packets can be treated differently. Most functions already clear the ECN bits, but there are a few cases where this is not done. This series only fixes the ones related to source address validation. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-19netfilter: rpfilter: mask ecn bits before fib lookupGuillaume Nault1-1/+1
RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt() treats Not-ECT or ECT(1) packets in a different way than those with ECT(0) or CE. Reproducer: Create two netns, connected with a veth: $ ip netns add ns0 $ ip netns add ns1 $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11/32 dev veth10 Add a route to ns1 in ns0: $ ip -netns ns0 route add 192.0.2.11/32 dev veth01 In ns1, only packets with TOS 4 can be routed to ns0: $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10 Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS is 4: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 0% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 0% packet loss ... Now use iptable's rpfilter module in ns1: $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP Not-ECT and ECT(1) packets still pass: $ ip netns exec ns0 ping -Q 4 192.0.2.11 # TOS 4, Not-ECT ... 0% packet loss ... $ ip netns exec ns0 ping -Q 5 192.0.2.11 # TOS 4, ECT(1) ... 0% packet loss ... But ECT(0) and ECN packets are dropped: $ ip netns exec ns0 ping -Q 6 192.0.2.11 # TOS 4, ECT(0) ... 100% packet loss ... $ ip netns exec ns0 ping -Q 7 192.0.2.11 # TOS 4, CE ... 100% packet loss ... After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore. Fixes: 8f97339d3feb ("netfilter: add ipv4 reverse path filter match") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-19udp: mask TOS bits in udp_v4_early_demux()Guillaume Nault1-1/+2
udp_v4_early_demux() is the only function that calls ip_mc_validate_source() with a TOS that hasn't been masked with IPTOS_RT_MASK. This results in different behaviours for incoming multicast UDPv4 packets, depending on if ip_mc_validate_source() is called from the early-demux path (udp_v4_early_demux) or from the regular input path (ip_route_input_noref). ECN would normally not be used with UDP multicast packets, so the practical consequences should be limited on that side. However, IPTOS_RT_MASK is used to also masks the TOS' high order bits, to align with the non-early-demux path behaviour. Reproducer: Setup two netns, connected with veth: $ ip netns add ns0 $ ip netns add ns1 $ ip -netns ns0 link set dev lo up $ ip -netns ns1 link set dev lo up $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1 $ ip -netns ns0 link set dev veth01 up $ ip -netns ns1 link set dev veth10 up $ ip -netns ns0 address add 192.0.2.10 peer 192.0.2.11/32 dev veth01 $ ip -netns ns1 address add 192.0.2.11 peer 192.0.2.10/32 dev veth10 In ns0, add route to multicast address 224.0.2.0/24 using source address 198.51.100.10: $ ip -netns ns0 address add 198.51.100.10/32 dev lo $ ip -netns ns0 route add 224.0.2.0/24 dev veth01 src 198.51.100.10 In ns1, define route to 198.51.100.10, only for packets with TOS 4: $ ip -netns ns1 route add 198.51.100.10/32 tos 4 dev veth10 Also activate rp_filter in ns1, so that incoming packets not matching the above route get dropped: $ ip netns exec ns1 sysctl -wq net.ipv4.conf.veth10.rp_filter=1 Now try to receive packets on 224.0.2.11: $ ip netns exec ns1 socat UDP-RECVFROM:1111,ip-add-membership=224.0.2.11:veth10,ignoreeof - In ns0, send packet to 224.0.2.11 with TOS 4 and ECT(0) (that is, tos 6 for socat): $ echo test0 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6 The "test0" message is properly received by socat in ns1, because early-demux has no cached dst to use, so source address validation is done by ip_route_input_mc(), which receives a TOS that has the ECN bits masked. Now send another packet to 224.0.2.11, still with TOS 4 and ECT(0): $ echo test1 | ip netns exec ns0 socat - UDP-DATAGRAM:224.0.2.11:1111,bind=:1111,tos=6 The "test1" message isn't received by socat in ns1, because, now, early-demux has a cached dst to use and calls ip_mc_validate_source() immediately, without masking the ECN bits. Fixes: bc044e8db796 ("udp: perform source validation for mcast early demux") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-19xsk: Clear pool even for inactive queuesMaxim Mikityanskiy1-2/+2
The number of queues can change by other means, rather than ethtool. For example, attaching an mqprio qdisc with num_tc > 1 leads to creating multiple sets of TX queues, which may be then destroyed when mqprio is deleted. If an AF_XDP socket is created while mqprio is active, dev->_tx[queue_id].pool will be filled, but then real_num_tx_queues may decrease with deletion of mqprio, which will mean that the pool won't be NULLed, and a further increase of the number of TX queues may expose a dangling pointer. To avoid any potential misbehavior, this commit clears pool for RX and TX queues, regardless of real_num_*_queues, still taking into consideration num_*_queues to avoid overflows. Fixes: 1c1efc2af158 ("xsk: Create and free buffer pool independently from umem") Fixes: a41b4f3c58dd ("xsk: simplify xdp_clear_umem_at_qid implementation") Signed-off-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-01-19Merge tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+3
Pull task_work fix from Jens Axboe: "The TIF_NOTIFY_SIGNAL change inadvertently removed the unconditional task_work run we had in get_signal(). This caused a regression for some setups, since we're relying on eg ____fput() being run to close and release, for example, a pipe and wake the other end. For 5.11, I prefer the simple solution of just reinstating the unconditional run, even if it conceptually doesn't make much sense - if you need that kind of guarantee, you should be using TWA_SIGNAL instead of TWA_NOTIFY. But it's the trivial fix for 5.11, and would ensure that other potential gotchas/assumptions for task_work don't regress for 5.11. We're looking into further simplifying the task_work notifications for 5.12 which would resolve that too" * tag 'task_work-2021-01-19' of git://git.kernel.dk/linux-block: task_work: unconditionally run task_work from get_signal()
2021-01-20openrisc: io: Add missing __iomem annotation to iounmap()Geert Uytterhoeven2-2/+2
With C=1: drivers/soc/renesas/rmobile-sysc.c:330:33: sparse: sparse: incorrect type in argument 1 (different address spaces) @@ expected void *addr @@ got void [noderef] __iomem *[assigned] base @@ drivers/soc/renesas/rmobile-sysc.c:330:33: sparse: expected void *addr drivers/soc/renesas/rmobile-sysc.c:330:33: sparse: got void [noderef] __iomem *[assigned] base Fix this by adding the missing __iomem annotation to iounmap(). Reported-by: kernel test robot <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Stafford Horne <[email protected]>
2021-01-19bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callbackMircea Cirjaliu1-1/+1
I assume this was obtained by copy/paste. Point it to bpf_map_peek_elem() instead of bpf_map_pop_elem(). In practice it may have been less likely hit when under JIT given shielded via 84430d4232c3 ("bpf, verifier: avoid retpoline for map push/pop/peek operation"). Fixes: f1a2e44a3aec ("bpf: add queue and stack maps") Signed-off-by: Mircea Cirjaliu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Cc: Mauricio Vasquez <[email protected]> Link: https://lore.kernel.org/bpf/AM7PR02MB6082663DFDCCE8DA7A6DD6B1BBA30@AM7PR02MB6082.eurprd02.prod.outlook.com
2021-01-19Merge tag 'nfsd-5.11-2' of ↵Linus Torvalds3-9/+61
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Avoid exposing parent of root directory in NFSv3 READDIRPLUS results - Fix a tracepoint change that went in the initial 5.11 merge * tag 'nfsd-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Move the svc_xdr_recvfrom tracepoint again nfsd4: readdirplus shouldn't return parent of export
2021-01-19Merge tag 'hyperv-fixes-signed-20210119' of ↵Linus Torvalds1-3/+26
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fix from Wei Liu: "One patch from Dexuan to fix clockevent initialization" * tag 'hyperv-fixes-signed-20210119' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Initialize clockevents after LAPIC is initialized
2021-01-19Merge branch 'sh_eth-fix-reboot-crash'Jakub Kicinski3-2/+33
Geert Uytterhoeven says: ==================== sh_eth: Fix reboot crash This patch fixes a regression v5.11-rc1, where rebooting while a sh_eth device is not opened will cause a crash. Changes compared to v1: - Export mdiobb_{read,write}(), - Call mdiobb_{read,write}() now they are exported, - Use mii_bus.parent to avoid bb_info.dev copy, - Drop RFC state. Alternatively, mdio-bitbang could provide Runtime PM-aware wrappers itself, and use them either manually (through a new parameter to alloc_mdio_bitbang(), or a new alloc_mdio_bitbang_*() function), or automatically (e.g. if pm_runtime_enabled() returns true). Note that the latter requires a "struct device *" parameter to operate on. Currently there are only two drivers that call alloc_mdio_bitbang() and use Runtime PM: the Renesas sh_eth and ravb drivers. This series fixes the former, while the latter is not affected (it keeps the device powered all the time between driver probe and driver unbind, and changing that seems to be non-trivial). ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-19sh_eth: Make PHY access aware of Runtime PM to fix reboot crashGeert Uytterhoeven1-0/+26
Wolfram reports that his R-Car H2-based Lager board can no longer be rebooted in v5.11-rc1, as it crashes with an imprecise external abort. The issue can be reproduced on other boards (e.g. Koelsch with R-Car M2-W) too, if CONFIG_IP_PNP is disabled, and the Ethernet interface is down at reboot time: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=422b6835, *pte=00000000, *ppte=00000000 Internal error: : 1406 [#1] ARM Modules linked in: CPU: 0 PID: 1105 Comm: init Tainted: G W 5.10.0-rc1-00402-ge2f016cf7751 #1048 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) PC is at sh_mdio_ctrl+0x44/0x60 LR is at sh_mmd_ctrl+0x20/0x24 ... Backtrace: [<c0451f30>] (sh_mdio_ctrl) from [<c0451fd4>] (sh_mmd_ctrl+0x20/0x24) r7:0000001f r6:00000020 r5:00000002 r4:c22a1dc4 [<c0451fb4>] (sh_mmd_ctrl) from [<c044fc18>] (mdiobb_cmd+0x38/0xa8) [<c044fbe0>] (mdiobb_cmd) from [<c044feb8>] (mdiobb_read+0x58/0xdc) r9:c229f844 r8:c0c329dc r7:c221e000 r6:00000001 r5:c22a1dc4 r4:00000001 [<c044fe60>] (mdiobb_read) from [<c044c854>] (__mdiobus_read+0x74/0xe0) r7:0000001f r6:00000001 r5:c221e000 r4:c221e000 [<c044c7e0>] (__mdiobus_read) from [<c044c9d8>] (mdiobus_read+0x40/0x54) r7:0000001f r6:00000001 r5:c221e000 r4:c221e458 [<c044c998>] (mdiobus_read) from [<c044d678>] (phy_read+0x1c/0x20) r7:ffffe000 r6:c221e470 r5:00000200 r4:c229f800 [<c044d65c>] (phy_read) from [<c044d94c>] (kszphy_config_intr+0x44/0x80) [<c044d908>] (kszphy_config_intr) from [<c044694c>] (phy_disable_interrupts+0x44/0x50) r5:c229f800 r4:c229f800 [<c0446908>] (phy_disable_interrupts) from [<c0449370>] (phy_shutdown+0x18/0x1c) r5:c229f800 r4:c229f804 [<c0449358>] (phy_shutdown) from [<c040066c>] (device_shutdown+0x168/0x1f8) [<c0400504>] (device_shutdown) from [<c013de44>] (kernel_restart_prepare+0x3c/0x48) r9:c22d2000 r8:c0100264 r7:c0b0d034 r6:00000000 r5:4321fedc r4:00000000 [<c013de08>] (kernel_restart_prepare) from [<c013dee0>] (kernel_restart+0x1c/0x60) [<c013dec4>] (kernel_restart) from [<c013e1d8>] (__do_sys_reboot+0x168/0x208) r5:4321fedc r4:01234567 [<c013e070>] (__do_sys_reboot) from [<c013e2e8>] (sys_reboot+0x18/0x1c) r7:00000058 r6:00000000 r5:00000000 r4:00000000 [<c013e2d0>] (sys_reboot) from [<c0100060>] (ret_fast_syscall+0x0/0x54) As of commit e2f016cf775129c0 ("net: phy: add a shutdown procedure"), system reboot calls phy_disable_interrupts() during shutdown. As this happens unconditionally, the PHY registers may be accessed while the device is suspended, causing undefined behavior, which may crash the system. Fix this by wrapping the PHY bitbang accessors in the sh_eth driver by wrappers that take care of Runtime PM, to resume the device when needed. Reported-by: Wolfram Sang <[email protected]> Suggested-by: Andrew Lunn <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Tested-by: Wolfram Sang <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-19mdio-bitbang: Export mdiobb_{read,write}()Geert Uytterhoeven2-2/+7
Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers can call them from their MDIO read/write wrappers. Signed-off-by: Geert Uytterhoeven <[email protected]> Tested-by: Wolfram Sang <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-19net: core: devlink: use right genl user_ptr when handling port param get/setOleksandr Mazur1-2/+2
Fix incorrect user_ptr dereferencing when handling port param get/set: idx [0] stores the 'struct devlink' pointer; idx [1] stores the 'struct devlink_port' pointer; Fixes: 637989b5d77e ("devlink: Always use user_ptr[0] for devlink and simplify post_doit") CC: Parav Pandit <[email protected]> Signed-off-by: Oleksandr Mazur <[email protected]> Signed-off-by: Vadym Kochan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-19x86: PM: Register syscore_ops for scale invarianceRafael J. Wysocki1-0/+19
On x86 scale invariace tends to be disabled during resume from suspend-to-RAM, because the MPERF or APERF MSR values are not as expected then due to updates taking place after the platform firmware has been invoked to complete the suspend transition. That, of course, is not desirable, especially if the schedutil scaling governor is in use, because the lack of scale invariance causes it to be less reliable. To counter that effect, modify init_freq_invariance() to register a syscore_ops object for scale invariance with the ->resume callback pointing to init_counter_refs() which will run on the CPU starting the resume transition (the other CPUs will be taken care of the "online" operations taking place later). Fixes: e2b0d619b400 ("x86, sched: check for counters overflow in frequency invariant accounting") Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Giovanni Gherdovich <[email protected]> Link: https://lkml.kernel.org/r/1803209.Mvru99baaF@kreacher
2021-01-19ALSA: hda: Balance runtime/system PM if direct-complete is disabledKai-Heng Feng1-17/+7
After hibernation, HDA controller can't be runtime-suspended after commit 215a22ed31a1 ("ALSA: hda: Refactor codjc PM to use direct-complete optimization"), which enables direct-complete for HDA codec. The HDA codec driver didn't expect direct-complete will be disabled after it returns a positive value from prepare() callback. However, there are some places that PM core can disable direct-complete. For instance, system hibernation or when codec has subordinates like LEDs. So if the codec is prepared for direct-complete but PM core still calls codec's suspend or freeze callback, partially revert the commit and take the original approach, which uses pm_runtime_force_*() helpers to ensure PM refcount are balanced. Meanwhile, still keep prepare() and complete() callbacks to enable direct-complete and request a resume for jack detection, respectively. Reported-by: Kenneth R. Crudup <[email protected]> Fixes: 215a22ed31a1 ("ALSA: hda: Refactor codec PM to use direct-complete optimization") Signed-off-by: Kai-Heng Feng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-01-19drm/vram-helper: Reuse existing page mappings in vmapThomas Zimmermann1-3/+11
For performance, BO page mappings can stay in place even if the map counter has returned to 0. In these cases, the existing page mapping has to be reused by the next vmap operation. Otherwise a new mapping would be installed and the old mapping's pages leak. Fix the issue by reusing existing page mappings for vmap operations. Signed-off-by: Thomas Zimmermann <[email protected]> Fixes: 1086db71a1db ("drm/vram-helper: Remove invariant parameters from internal kmap function") Acked-by: Christian König <[email protected]> Tested-by: Eli Cohen <[email protected]> Reported-by: Eli Cohen <[email protected]> Reported-by: kernel test robot <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Christian König <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-01-19drm/atomic: put state on error pathPan Bian1-1/+1
Put the state before returning error code. Fixes: 44596b8c4750 ("drm/atomic: Unify conflicting encoder handling.") Signed-off-by: Pan Bian <[email protected]> Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-01-19usb: bdc: Make bdc pci driver depend on BROKENPatrik Jakobsson1-1/+1
The bdc pci driver is going to be removed due to it not existing in the wild. This patch turns off compilation of the driver so that stable kernels can also pick up the change. This helps the out-of-tree facetimehd webcam driver as the pci id conflicts with bdc. Cc: Al Cooper <[email protected]> Cc: <[email protected]> Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Patrik Jakobsson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-19gpio: tegra: Add missing dependenciesThierry Reding1-0/+2
Commit efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") moved the Tegra GPIO driver to the generic GPIO IRQ chip infrastructure and made the IRQ domain hierarchical, so the driver needs to pull in the support infrastructure via the GPIOLIB_IRQCHIP and IRQ_DOMAIN_HIERARCHY Kconfig options. Fixes: efcdca286eef ("gpio: tegra: Convert to gpio_irq_chip") Reported-by: kernel test robot <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-01-19gpio: sifive: select IRQ_DOMAIN_HIERARCHY rather than depend on itRandy Dunlap1-1/+2
This is the only driver in the kernel source tree that depends on IRQ_DOMAIN_HIERARCHY instead of selecting it. Since it is not a visible Kconfig symbol, depending on it (expecting a user to set/enable it) doesn't make much sense, so change it to select instead of "depends on". Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs") Signed-off-by: Randy Dunlap <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Bartosz Golaszewski <[email protected]> Cc: [email protected] Cc: Thierry Reding <[email protected]> Cc: Greentime Hu <[email protected]> Cc: Yash Shah <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-01-19gpio: mvebu: fix pwm .get_state period calculationBaruch Siach1-11/+8
The period is the sum of on and off values. That is, calculate period as ($on + $off) / clkrate instead of $off / clkrate - $on / clkrate that makes no sense. Reported-by: Russell King <[email protected]> Reviewed-by: Uwe Kleine-König <[email protected]> Fixes: 757642f9a584e ("gpio: mvebu: Add limited PWM support") Signed-off-by: Baruch Siach <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-01-19gpiolib: add a warning on gpiochip->to_irq definedNikita Shubin1-0/+3
gpiochip->to_irq method is redefined in gpiochip_add_irqchip. A lot of gpiod driver's still define ->to_irq method, let's give a gentle warning that they can no longer rely on it, so they can remove it on ocassion. Fixes: e0d8972898139 ("gpio: Implement tighter IRQ chip integration") Signed-off-by: Nikita Shubin <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2021-01-19printk: fix buffer overflow potential for print_text()John Ogness1-9/+27
Before the commit 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer"), msg_print_text() would only write up to size-1 bytes into the provided buffer. Some callers expect this behavior and append a terminator to returned string. In particular: arch/powerpc/xmon/xmon.c:dump_log_buf() arch/um/kernel/kmsg_dump.c:kmsg_dumper_stdout() msg_print_text() has been replaced by record_print_text(), which currently fills the full size of the buffer. This causes a buffer overflow for the above callers. Change record_print_text() so that it will only use size-1 bytes for text data. Also, for paranoia sakes, add a terminator after the text data. And finally, document this behavior so that it is clear that only size-1 bytes are used and a terminator is added. Fixes: 896fbe20b4e2333fb55 ("printk: use the lockless ringbuffer") Cc: [email protected] # 5.10+ Signed-off-by: John Ogness <[email protected]> Reviewed-by: Petr Mladek <[email protected]> Acked-by: Sergey Senozhatsky <[email protected]> Signed-off-by: Petr Mladek <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-19x86/entry: Remove put_ret_addr_in_rdi THUNK macro argumentBorislav Petkov1-6/+1
That logic is unused since 320100a5ffe5 ("x86/entry: Remove the TRACE_IRQS cruft") Remove it. Suggested-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2021-01-19drm/i915: Only enable DFP 4:4:4->4:2:0 conversion when outputting YCbCr 4:4:4Ville Syrjälä3-6/+8
Let's not enable the 4:4:4->4:2:0 conversion bit in the DFP unless we're actually outputting YCbCr 4:4:4. It would appear some protocol converters blindy consult this bit even when the source is outputting RGB, resulting in a visual mess. Cc: [email protected] Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2914 Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Fixes: 181567aa9f0d ("drm/i915: Do YCbCr 444->420 conversion via DP protocol converters") Reviewed-by: Jani Nikula <[email protected]> (cherry picked from commit 3170a21f7059c4660c469f59bf529f372a57da5f) Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-01-19drm/nouveau/nvif: fix method count when pushing an arrayBen Skeggs1-108/+108
Reported-by: Lyude Paul <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2021-01-18tcp: fix TCP_USER_TIMEOUT with zero windowEnke Chen6-7/+14
The TCP session does not terminate with TCP_USER_TIMEOUT when data remain untransmitted due to zero window. The number of unanswered zero-window probes (tcp_probes_out) is reset to zero with incoming acks irrespective of the window size, as described in tcp_probe_timer(): RFC 1122 4.2.2.17 requires the sender to stay open indefinitely as long as the receiver continues to respond probes. We support this by default and reset icsk_probes_out with incoming ACKs. This counter, however, is the wrong one to be used in calculating the duration that the window remains closed and data remain untransmitted. Thanks to Jonathan Maxwell <[email protected]> for diagnosing the actual issue. In this patch a new timestamp is introduced for the socket in order to track the elapsed time for the zero-window probes that have not been answered with any non-zero window ack. Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT") Reported-by: William McCall <[email protected]> Co-developed-by: Neal Cardwell <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: Enke Chen <[email protected]> Reviewed-by: Yuchung Cheng <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18Merge branch 'ipv6-fixes-for-the-multicast-routes'Jakub Kicinski1-1/+2
Matteo Croce says: ==================== ipv6: fixes for the multicast routes Fix two wrong flags in the IPv6 multicast routes created by the autoconf code. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18ipv6: set multicast flag on the multicast routeMatteo Croce1-1/+1
The multicast route ff00::/8 is created with type RTN_UNICAST: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto kernel scope global metric 256 pref medium Set the type to RTN_MULTICAST which is more appropriate. Fixes: e8478e80e5a7 ("net/ipv6: Save route type in rt6_info") Signed-off-by: Matteo Croce <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18ipv6: create multicast route with RTPROT_KERNELMatteo Croce1-0/+1
The ff00::/8 multicast route is created without specifying the fc_protocol field, so the default RTPROT_BOOT value is used: $ ip -6 -d route unicast ::1 dev lo proto kernel scope global metric 256 pref medium unicast fe80::/64 dev eth0 proto kernel scope global metric 256 pref medium unicast ff00::/8 dev eth0 proto boot scope global metric 256 pref medium As the documentation says, this value identifies routes installed during boot, but the route is created when interface is set up. Change the value to RTPROT_KERNEL which is a better value. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Matteo Croce <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18Merge tag 'mac80211-for-net-2021-01-18.2' of ↵Jakub Kicinski6-40/+54
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes: * kernel-doc parsing fixes * incorrect debugfs string checks * locking fix in regulatory * some encryption-related fixes * tag 'mac80211-for-net-2021-01-18.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: check if atf has been disabled in __ieee80211_schedule_txq mac80211: do not drop tx nulldata packets on encrypted links mac80211: fix encryption key selection for 802.3 xmit mac80211: fix fast-rx encryption check mac80211: fix incorrect strlen of .write in debugfs cfg80211: fix a kerneldoc markup cfg80211: Save the regulatory domain with a lock cfg80211/mac80211: fix kernel-doc for SAR APIs ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18RDMA/cxgb4: Fix the reported max_recv_sge valueKamal Heib1-1/+1
The max_recv_sge value is wrongly reported when calling query_qp, This is happening due to a typo when assigning the max_recv_sge value, the value of sq_max_sges was assigned instead of rq_max_sges. Fixes: 3e5c02c9ef9a ("iw_cxgb4: Support query_qp() verb") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kamal Heib <[email protected]> Reviewed-by: Potnuri Bharat Teja <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2021-01-19selftests/powerpc: Fix exit status of pkey testsSandipan Das2-2/+2
Since main() does not return a value explicitly, the return values from FAIL_IF() conditions are ignored and the tests can still pass irrespective of failures. This makes sure that we always explicitly return the correct test exit status. Fixes: 1addb6444791 ("selftests/powerpc: Add test for execute-disabled pkeys") Fixes: c27f2fd1705a ("selftests/powerpc: Add test for pkey siginfo verification") Reported-by: Eirik Fuller <[email protected]> Signed-off-by: Sandipan Das <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-01-18net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnextRasmus Villemoes1-0/+4
mv88e6xxx_port_vlan_join checks whether the VTU already contains an entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely changes the relevant .member[] element and loads the updated entry into the VTU. However, at least for the mv88e6250, the on-stack struct mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly initialized, neither in mv88e6xxx_port_vlan_join() nor inside the getnext implementation. So the new entry has random garbage for the STU bits, breaking VLAN filtering. When the VTU entry is initially created, those bits are all zero, and we should make sure to keep them that way when the entry is updated. Fixes: 92307069a96c (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097) Signed-off-by: Rasmus Villemoes <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Tobias Waldekranz <[email protected]> Tested-by: Tobias Waldekranz <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual ↵Jeannie Stevenson1-0/+1
fan control This commit enables dual fan control for the new Lenovo P53 and P73 laptop models. Signed-off-by: Jeannie Stevenson <[email protected]> Link: https://lore.kernel.org/r/Pn_Xii4XYpQRFtgkf4PbNgieE89BAkHgLI1kWIq-zFudwh2A1DY5J_DJVHK06rMW_hGPHx_mPE33gd8mg9-8BxqJTaSC6hhPqAsfZlcNGH0=@protonmail.com Signed-off-by: Hans de Goede <[email protected]>
2021-01-18platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errorsHans de Goede1-1/+2
The recently added thermal policy support makes a hp_wmi_perform_query(0x4c, ...) call on older devices which do not support thermal policies this causes the following warning to be logged (seen on a HP Stream x360 Convertible PC 11): [ 26.805305] hp_wmi: query 0x4c returned error 0x3 Error 0x3 is HPWMI_RET_UNKNOWN_COMMAND error. This commit silences the warning for unknown-command errors, silencing the new warning. Cc: Elia Devito <[email protected]> Fixes: 81c93798ef3e ("platform/x86: hp-wmi: add support for thermal policy") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2021-01-18net: mscc: ocelot: allow offloading of bridge on top of LAGVladimir Oltean1-3/+1
The blamed commit was too aggressive, and it made ocelot_netdevice_event react only to network interface events emitted for the ocelot switch ports. In fact, only the PRECHANGEUPPER should have had that check. When we ignore all events that are not for us, we miss the fact that the upper of the LAG changes, and the bonding interface gets enslaved to a bridge. This is an operation we could offload under certain conditions. Fixes: 7afb3e575e5a ("net: mscc: ocelot: don't handle netdev events for other netdevs") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-18Merge tag 'spi-fix-v5.11-rc4' of ↵Linus Torvalds2-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few more bug fixes for SPI, both driver specific ones. The caching in the Cadence driver is to avoid a deadlock trying to retrieve the cached value later at runtime" * tag 'spi-fix-v5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: cadence: cache reference clock rate during probe spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode
2021-01-18Merge tag 'fixes-2021-01-18' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull ia64 build fix from Mike Rapoport: "Fix an ia64 build failure caused by memory model changes" * tag 'fixes-2021-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: ia64: fix build failure caused by memory model changes
2021-01-18Merge branch 'linus' of ↵Linus Torvalds2-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "A Kconfig dependency issue with omap-sham and a divide by zero in xor on some platforms" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: omap-sham - Fix link error without crypto-engine crypto: xor - Fix divide error in do_xor_speed()
2021-01-18Merge tag 'asoc-fix-v5.11-rc4' of ↵Takashi Iwai550-3328/+5152
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.11 A few more fixes for v5.11, mostly around HDA jack detection, plus a couple of updates to the MAINTAINERS entries.
2021-01-18platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-listHans de Goede1-6/+0
THe HP Stream x360 Convertible PC 11 DSDT has the following VGBS function: Method (VGBS, 0, Serialized) { If ((^^PCI0.LPCB.EC0.ROLS == Zero)) { VBDS = Zero } Else { VBDS = Zero } Return (VBDS) /* \_SB_.VGBI.VBDS */ } Which is obviously wrong, because it always returns 0 independent of the 2-in-1 being in laptop or tablet mode. This causes the intel-vbtn driver to initially report SW_TABLET_MODE = 1 to userspace, which is known to cause problems when the 2-in-1 is actually in laptop mode. During earlier testing this turned out to not be a problem because the 2-in-1 would do a Notify(..., 0xCC) or Notify(..., 0xCD) soon after the intel-vbtn driver loaded, correcting the SW_TABLET_MODE state. Further testing however has shown that this Notify() soon after the intel-vbtn driver loads, does not always happen. When the Notify does not happen, then intel-vbtn reports SW_TABLET_MODE = 1 resulting in a non-working touchpad. IOW the tablet-mode reporting is not reliable on this device, so it should be dropped from the allow-list, fixing the touchpad sometimes not working. Fixes: 8169bd3e6e19 ("platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2021-01-18kasan, arm64: fix pointer tags in KASAN reportsAndrey Konovalov1-3/+4
As of the "arm64: expose FAR_EL1 tag bits in siginfo" patch, the address that is passed to report_tag_fault has pointer tags in the format of 0x0X, while KASAN uses 0xFX format (note the difference in the top 4 bits). Fix up the pointer tag for kernel pointers in do_tag_check_fault by setting them to the same value as bit 55. Explicitly use __untagged_addr() instead of untagged_addr(), as the latter doesn't affect TTBR1 addresses. Fixes: dceec3ff7807 ("arm64: expose FAR_EL1 tag bits in siginfo") Fixes: 4291e9ee6189 ("kasan, arm64: print report from tag fault handler") Signed-off-by: Andrey Konovalov <[email protected]> Reviewed-by: Catalin Marinas <[email protected]> Reviewed-by: Vincenzo Frascino <[email protected]> Link: https://linux-review.googlesource.com/id/I9ced973866036d8679e8f4ae325de547eb969649 Link: https://lore.kernel.org/r/ff30b0afe6005fd046f9ac72bfb71822aedccd89.1610731872.git.andreyknvl@google.com Signed-off-by: Catalin Marinas <[email protected]>
2021-01-18nvmet: set right status on error in id-ns handlerChaitanya Kulkarni1-2/+6
The function nvmet_execute_identify_ns() doesn't set the status if call to nvmet_find_namespace() fails. In that case we set the status of the request to the value return by the nvmet_copy_sgl(). Set the status to NVME_SC_INVALID_NS and adjust the code such that request will have the right status on nvmet_find_namespace() failure. Without this patch :- NVME Identify Namespace 3: nsze : 0 ncap : 0 nuse : 0 nsfeat : 0 nlbaf : 0 flbas : 0 mc : 0 dpc : 0 dps : 0 nmic : 0 rescap : 0 fpi : 0 dlfeat : 0 nawun : 0 nawupf : 0 nacwu : 0 nabsn : 0 nabo : 0 nabspf : 0 noiob : 0 nvmcap : 0 mssrl : 0 mcl : 0 msrc : 0 nsattr : 0 nvmsetid: 0 anagrpid: 0 endgid : 0 nguid : 00000000000000000000000000000000 eui64 : 0000000000000000 lbaf 0 : ms:0 lbads:0 rp:0 (in use) With this patch-series :- feb3b88b501e (HEAD -> nvme-5.11) nvmet: remove extra variable in identify ns 6302aa67210a nvmet: remove extra variable in id-desclist ed57951da453 nvmet: remove extra variable in smart log nsid be384b8c24dc nvmet: set right status on error in id-ns handler NVMe status: INVALID_NS: The namespace or the format of that namespace is invalid(0xb) Signed-off-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.