| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This effectively reverts commit d5c8238849e7 ("btrfs: convert
data_seqcount to seqcount_mutex_t").
While running fstests on 32 bits test box, many tests failed because of
warnings in dmesg. One of those warnings (btrfs/003):
[66.441317] WARNING: CPU: 6 PID: 9251 at include/linux/seqlock.h:279 btrfs_remove_chunk+0x58b/0x7b0 [btrfs]
[66.441446] CPU: 6 PID: 9251 Comm: btrfs Tainted: G O 5.11.0-rc4-custom+ #5
[66.441449] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.14.0-1 04/01/2014
[66.441451] EIP: btrfs_remove_chunk+0x58b/0x7b0 [btrfs]
[66.441472] EAX: 00000000 EBX: 00000001 ECX: c576070c EDX: c6b15803
[66.441475] ESI: 10000000 EDI: 00000000 EBP: c56fbcfc ESP: c56fbc70
[66.441477] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010246
[66.441481] CR0: 80050033 CR2: 05c8da20 CR3: 04b20000 CR4: 00350ed0
[66.441485] Call Trace:
[66.441510] btrfs_relocate_chunk+0xb1/0x100 [btrfs]
[66.441529] ? btrfs_lookup_block_group+0x17/0x20 [btrfs]
[66.441562] btrfs_balance+0x8ed/0x13b0 [btrfs]
[66.441586] ? btrfs_ioctl_balance+0x333/0x3c0 [btrfs]
[66.441619] ? __this_cpu_preempt_check+0xf/0x11
[66.441643] btrfs_ioctl_balance+0x333/0x3c0 [btrfs]
[66.441664] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[66.441683] btrfs_ioctl+0x414/0x2ae0 [btrfs]
[66.441700] ? __lock_acquire+0x35f/0x2650
[66.441717] ? lockdep_hardirqs_on+0x87/0x120
[66.441720] ? lockdep_hardirqs_on_prepare+0xd0/0x1e0
[66.441724] ? call_rcu+0x2d3/0x530
[66.441731] ? __might_fault+0x41/0x90
[66.441736] ? kvm_sched_clock_read+0x15/0x50
[66.441740] ? sched_clock+0x8/0x10
[66.441745] ? sched_clock_cpu+0x13/0x180
[66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[66.441750] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[66.441768] __ia32_sys_ioctl+0x165/0x8a0
[66.441773] ? __this_cpu_preempt_check+0xf/0x11
[66.441785] ? __might_fault+0x89/0x90
[66.441791] __do_fast_syscall_32+0x54/0x80
[66.441796] do_fast_syscall_32+0x32/0x70
[66.441801] do_SYSENTER_32+0x15/0x20
[66.441805] entry_SYSENTER_32+0x9f/0xf2
[66.441808] EIP: 0xab7b5549
[66.441814] EAX: ffffffda EBX: 00000003 ECX: c4009420 EDX: bfa91f5c
[66.441816] ESI: 00000003 EDI: 00000001 EBP: 00000000 ESP: bfa91e98
[66.441818] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000292
[66.441833] irq event stamp: 42579
[66.441835] hardirqs last enabled at (42585): [<c60eb065>] console_unlock+0x495/0x590
[66.441838] hardirqs last disabled at (42590): [<c60eafd5>] console_unlock+0x405/0x590
[66.441840] softirqs last enabled at (41698): [<c601b76c>] call_on_stack+0x1c/0x60
[66.441843] softirqs last disabled at (41681): [<c601b76c>] call_on_stack+0x1c/0x60
========================================================================
btrfs_remove_chunk+0x58b/0x7b0:
__seqprop_mutex_assert at linux/./include/linux/seqlock.h:279
(inlined by) btrfs_device_set_bytes_used at linux/fs/btrfs/volumes.h:212
(inlined by) btrfs_remove_chunk at linux/fs/btrfs/volumes.c:2994
========================================================================
The warning is produced by lockdep_assert_held() in
__seqprop_mutex_assert() if CONFIG_LOCKDEP is enabled.
And "olumes.c:2994 is btrfs_device_set_bytes_used() with mutex lock
fs_info->chunk_mutex held already.
After adding some debug prints, the cause was found that many
__alloc_device() are called with NULL @fs_info (during scanning ioctl).
Inside the function, btrfs_device_data_ordered_init() is expanded to
seqcount_mutex_init(). In this scenario, its second
parameter info->chunk_mutex is &NULL->chunk_mutex which equals
to offsetof(struct btrfs_fs_info, chunk_mutex) unexpectedly. Thus,
seqcount_mutex_init() is called in wrong way. And later
btrfs_device_get/set helpers trigger lockdep warnings.
The device and filesystem object lifetimes are different and we'd have
to synchronize initialization of the btrfs_device::data_seqcount with
the fs_info, possibly using some additional synchronization. It would
still not prevent concurrent access to the seqcount lock when it's used
for read and initialization.
Commit d5c8238849e7 ("btrfs: convert data_seqcount to seqcount_mutex_t")
does not mention a particular problem being fixed so revert should not
cause any harm and we'll get the lockdep warning fixed.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210139
Reported-by: Erhard F <[email protected]>
Fixes: d5c8238849e7 ("btrfs: convert data_seqcount to seqcount_mutex_t")
CC: [email protected] # 5.10
CC: Davidlohr Bueso <[email protected]>
Signed-off-by: Su Yue <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
While running btrfs/011 in a loop I would often ASSERT() while trying to
add a new free space entry that already existed, or get an EEXIST while
adding a new block to the extent tree, which is another indication of
double allocation.
This occurs because when we do the free space tree population, we create
the new root and then populate the tree and commit the transaction.
The problem is when you create a new root, the root node and commit root
node are the same. During this initial transaction commit we will run
all of the delayed refs that were paused during the free space tree
generation, and thus begin to cache block groups. While caching block
groups the caching thread will be reading from the main root for the
free space tree, so as we make allocations we'll be changing the free
space tree, which can cause us to add the same range twice which results
in either the ASSERT(ret != -EEXIST); in __btrfs_add_free_space, or in a
variety of different errors when running delayed refs because of a
double allocation.
Fix this by marking the fs_info as unsafe to load the free space tree,
and fall back on the old slow method. We could be smarter than this,
for example caching the block group while we're populating the free
space tree, but since this is a serious problem I've opted for the
simplest solution.
CC: [email protected] # 4.9+
Fixes: a5ed91828518 ("Btrfs: implement the free space B-tree")
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Function kernel_kexec() is called with lock system_transition_mutex
held in reboot system call. While inside kernel_kexec(), it will
acquire system_transition_mutex agin. This will lead to dead lock.
The dead lock should be easily triggered, it hasn't caused any
failure report just because the feature 'kexec jump' is almost not
used by anyone as far as I know. An inquiry can be made about who
is using 'kexec jump' and where it's used. Before that, let's simply
remove the lock operation inside CONFIG_KEXEC_JUMP ifdeffery scope.
Fixes: 55f2503c3b69 ("PM / reboot: Eliminate race between reboot and suspend")
Signed-off-by: Baoquan He <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Reviewed-by: Pingfan Liu <[email protected]>
Cc: 4.19+ <[email protected]> # 4.19+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Our intention was to only remove path kobjects whenever a device is
being set offline. However, one corner case was missing.
If a device is disabled and enabled (using the IOCTLs BIODASDDISABLE and
BIODASDENABLE respectively), the enabling process will call
dasd_eckd_reload_device() which itself calls dasd_eckd_read_conf() in
order to update path information. During that update,
dasd_eckd_clear_conf_data() clears all old data and also removes all
kobjects. This will leave us with an inconsistent state of path kobjects
and a subsequent path verification leads to a failing kobject creation.
Fix this by removing kobjects only in the context of offlining a device
as initially intended.
Fixes: 19508b204740 ("s390/dasd: Display FC Endpoint Security information via sysfs")
Reported-by: Stefan Haberland <[email protected]>
Signed-off-by: Jan Höppner <[email protected]>
Reviewed-by: Stefan Haberland <[email protected]>
Reviewed-by: Cornelia Huck <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Calling acpi_thermal_check() from acpi_thermal_notify() directly
is problematic if _TMP triggers Notify () on the thermal zone for
which it has been evaluated (which happens on some systems), because
it causes a new acpi_thermal_notify() invocation to be queued up
every time and if that takes place too often, an indefinite number of
pending work items may accumulate in kacpi_notify_wq over time.
Besides, it is not really useful to queue up a new invocation of
acpi_thermal_check() if one of them is pending already.
For these reasons, rework acpi_thermal_notify() to queue up a thermal
check instead of calling acpi_thermal_check() directly and only allow
one thermal check to be pending at a time. Moreover, only allow one
acpi_thermal_check_fn() instance at a time to run
thermal_zone_device_update() for one thermal zone and make it return
early if it sees other instances running for the same thermal zone.
While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(),
as it is only called from there after the other changes made here.
[This issue appears to have been exposed by commit 6d25be5782e4
("sched/core, workqueues: Distangle worker accounting from rq
lock"), but it is unclear why it was not visible earlier.]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877
Reported-by: Stephen Berman <[email protected]>
Diagnosed-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Sebastian Andrzej Siewior <[email protected]>
Tested-by: Stephen Berman <[email protected]>
Cc: All applicable <[email protected]>
|
|
Commit 8765c5ba1949 ("ACPI / scan: Rework modalias creation when
"compatible" is present") may create two "MODALIAS=" in one uevent
file if specific conditions are met.
This breaks systemd-udevd, which assumes each "key" in one uevent file
to be unique. The internal implementation of systemd-udevd overwrites
the first MODALIAS with the second one, so its kmod rule doesn't load
the driver for the first MODALIAS.
So if both the ACPI modalias and the OF modalias are present, use the
latter to ensure that there will be only one MODALIAS.
Link: https://github.com/systemd/systemd/pull/18163
Suggested-by: Mika Westerberg <[email protected]>
Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Kai-Heng Feng <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Cc: 4.1+ <[email protected]> # 4.1+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Bossart <[email protected]>:
We've had several reports of broken dependencies. The 'right' fix is
to revisit the module dependencies as suggested by Arnd Bergmann. This
is WIP at https://github.com/thesofproject/linux/pull/2683. Since this
is taking longer than expected, I am only sharing quick fixes for now.
Pierre-Louis Bossart (2):
ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies
ASoC: SOF: SND_INTEL_DSP_CONFIG dependency
sound/soc/sof/intel/Kconfig | 3 ++-
sound/soc/sof/sof-acpi-dev.c | 11 ++++++-----
sound/soc/sof/sof-pci-dev.c | 10 ++++++----
3 files changed, 14 insertions(+), 10 deletions(-)
--
2.25.1
|
|
The following crash log can occur unplugging the usb dongle since,
after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will
always fail resulting in a skb kfree while the skb has been already
queued.
Fix the issue enqueuing the skb only if usb_submit_urb() succeed.
Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015
Workqueue: usb_hub_wq hub_event
RIP: 0010:skb_trim+0x2c/0x30
RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206
RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f
RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300
RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000
R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4
R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0
Call Trace:
mt7601u_tx_status+0x3e/0xa0 [mt7601u]
mt7601u_dma_cleanup+0xca/0x110 [mt7601u]
mt7601u_cleanup+0x22/0x30 [mt7601u]
mt7601u_disconnect+0x22/0x60 [mt7601u]
usb_unbind_interface+0x8a/0x270
? kernfs_find_ns+0x35/0xd0
__device_release_driver+0x17a/0x230
device_release_driver+0x24/0x30
bus_remove_device+0xdb/0x140
device_del+0x18b/0x430
? kobject_put+0x98/0x1d0
usb_disable_device+0xc6/0x1f0
usb_disconnect.cold+0x7e/0x20a
hub_event+0xbf3/0x1870
process_one_work+0x1b6/0x350
worker_thread+0x53/0x3e0
? process_one_work+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
Fixes: 23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org
|
|
If we find an entry without an SKB, we currently continue, but
that will just result in an infinite loop since we won't increment
the read pointer, and will try the same thing over and over again.
Fix this.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.abe2dedcc3ac.Ia6b03f9eeb617fd819e56dd5376f4bb8edc7b98a@changeid
|
|
If we get into a problem severe enough to attempt a reprobe,
we schedule a worker to do that. However, if the problem gets
more severe and the device is actually destroyed before this
worker has a chance to run, we use a free device. Bump up the
reference count of the device until the worker runs to avoid
this situation.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid
|
|
The bit that indicates if the device supports 160MHZ
is bit #9. The macro checks bit #8.
Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit.
Signed-off-by: Matti Gottlieb <[email protected]>
Fixes: d6f2134a3831 ("iwlwifi: add mac/rf types and 160MHz to the device tables")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.bddbf9b57a75.I16e09e2b1404b16bfff70852a5a654aa468579e2@changeid
|
|
In D3 resume flow, avoid the following race where sending
packets before updating the sequence number (sequence
number received from the wowlan status command response):
Thread 1:
__iwl_mvm_resume clears IWL_MVM_STATUS_IN_D3 and is cut
by thread 2 before reaching iwl_mvm_query_wakeup_reasons.
Thread 2:
iwl_mvm_mac_itxq_xmit calls iwl_mvm_tx_skb since
IWL_MVM_STATUS_IN_D3 is not set using a wrong sequence number.
Thread 1:
__iwl_mvm_resume continues and calls iwl_mvm_query_wakeup_reasons
updating the sequence number received from the firmware.
The next packet that will be sent now will cause sysassert 0x1096.
Fix the bug by moving 'clear IWL_MVM_STATUS_IN_D3' to after
sending the wowlan status command and updating the sequence
number.
Signed-off-by: Shaul Triebitz <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.fe927ec939c6.I103d3321fb55da7e6c6c51582cfadf94eb8b6c58@changeid
|
|
Until now we have been relying on matching the PCI ID and subsystem
device ID in order to recognize Qu devices with Hr2. Add rules to
match these devices, so that we don't have to add a new rule for every
new ID we get.
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.591ce253ddd8.Ia4b9cc2c535625890c6d6b560db97ee9f2d5ca3b@changeid
|
|
Having sta_id not set for aux_sta and snif_sta can potentially lead to a
hard to debug issue in case remove station is called without an add. In
this case sta_id 0, an unrelated regular station, will be removed.
In fact, we do have a FW assert that occures rarely and from the debug
data analysis it looks like sta_id 0 is removed by mistake, though it's
hard to pinpoint the exact flow. The WARN_ON in this patch should help
to find it.
Signed-off-by: Gregory Greenman <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5dc6dd9b22d5.I2add1b5ad24d0d0a221de79d439c09f88fcaf15d@changeid
|
|
The return type value of functions 1 and 2 were considered to be an
integer inside a buffer, but they can also be only an integer, without
the buffer. Fix the code in iwl_acpi_get_dsm_u8() to handle it as a
single integer value, as well as packed inside a buffer.
Signed-off-by: Matt Chen <[email protected]>
Fixes: 9db93491f29e ("iwlwifi: acpi: support device specific method (DSM)")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5757092adcd6.Ic24524627b899c9a01af38107a62a626bdf5ae3a@changeid
|
|
If we spin for a long time in memory reads that (for some reason in
hardware) take a long time, then we'll eventually get messages such
as
watchdog: BUG: soft lockup - CPU#2 stuck for 24s! [kworker/2:2:272]
This is because the reading really does take a very long time, and
we don't schedule, so we're hogging the CPU with this task, at least
if CONFIG_PREEMPT is not set, e.g. with CONFIG_PREEMPT_VOLUNTARY=y.
Previously I misinterpreted the situation and thought that this was
only going to happen if we had interrupts disabled, and then fixed
this (which is good anyway, however), but that didn't always help;
looking at it again now I realized that the spin unlock will only
reschedule if CONFIG_PREEMPT is used.
In order to avoid this issue, change the code to cond_resched() if
we've been spinning for too long here.
Signed-off-by: Johannes Berg <[email protected]>
Fixes: 04516706bb99 ("iwlwifi: pcie: limit memory read spin time")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.217a9d6a6a12.If964cb582ab0aaa94e81c4ff3b279eaafda0fd3f@changeid
|
|
There's no reason to use ktime_get() since we don't need any better
precision than jiffies, and since we no longer disable interrupts
around this code (when grabbing NIC access), jiffies will work fine.
Use jiffies instead of ktime_get().
This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule
in long-running memory reads". The code gets simpler with the weird clock use
etc. removed before we add cond_resched().
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.621c948b1fad.I3ee9f4bc4e74a0c9125d42fb7c35cd80df4698a1@changeid
|
|
If the image loader allocation fails, we leak all the previously
allocated memory. Fix this.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.97172cbaa67c.I3473233d0ad01a71aa9400832fb2b9f494d88a11@changeid
|
|
I hit a NULL pointer exception in this function when the
init flow went really bad.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.2e8da9f2c132.I0234d4b8ddaf70aaa5028a20c863255e05bc1f84@changeid
|
|
To avoid completion timeouts during device boot, set up the
LTR timeouts on more devices - similar to what we had before
for AX210.
This also corrects the AX210 workaround to be done only on
discrete (non-integrated) devices, otherwise the registers
have no effect.
Signed-off-by: Johannes Berg <[email protected]>
Fixes: edb625208d84 ("iwlwifi: pcie: set LTR to avoid completion timeout")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.fb819e19530b.I0396f82922db66426f52fbb70d32a29c8fd66951@changeid
|
|
The code was really awkward, we would first dereference
txq->entries when calling iwl_txq_genX_tfd_unmap and then
we would check that txq->entries is non-NULL.
Fix that by exiting if txq->entries is NULL.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.173359fc236d.I75c7c2397d20df8d7fbc24cb16a5232d5c551889@changeid
|
|
I noticed that the flow that triggers an NMI on the firmware
for old devices (tested on 7265) doesn't work.
Apparently, the firmware / device is still in low power when
we write the register that triggers the NMI. We call the
"grab_nic_access" function to make sure the device is awake
but that wasn't enough. I played with this and noticed that
if we wait 1 ms after the device reports it is awake before
we write to the NMI register, the device always sees our
write and the firmware gets properly asserted.
Triggering an NMI to the firmware can be done with the
debugfs hook:
echo 1 > /sys/kernel/debug/iwlwifi/0000\:00\:03.0/iwlmvm/fw_nmi
What happened before is that the firmware would just stall
without running its NMI routine. Because of that the driver
wouldn't get the "firmware crashed" interrupt. After a while
the driver would notice that the firmware is not responding
to some command and it would read the error data from the
firmware, but this data is populated in the NMI service
routine in the firmware which was not called. So in the logs
it looked like:
iwlwifi 0000:00:03.0: Error sending REPLY_ERROR: time out after 2000ms.
iwlwifi 0000:00:03.0: Current CMD queue read_ptr 33 write_ptr 34
iwlwifi 0000:00:03.0: Loaded firmware version: 29.09bd31e1.0 7265D-29.ucode
iwlwifi 0000:00:03.0: 0x00000000 | ADVANCED_SYSASSERT
iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status0
iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1
iwlwifi 0000:00:03.0: 0x00000000 | branchlink2
iwlwifi 0000:00:03.0: 0x00000000 | interruptlink1
iwlwifi 0000:00:03.0: 0x00000000 | interruptlink2
iwlwifi 0000:00:03.0: 0x00000000 | data1
iwlwifi 0000:00:03.0: 0x00000000 | data2
iwlwifi 0000:00:03.0: 0x00000000 | data3
iwlwifi 0000:00:03.0: 0x00000000 | beacon time
iwlwifi 0000:00:03.0: 0x00000000 | tsf low
...
With this fix, immediately after we trigger the NMI to the
firmware, we get the expected:
iwlwifi 0000:00:03.0: Microcode SW error detected. Restarting 0x2000000.
iwlwifi 0000:00:03.0: Start IWL Error Log Dump:
iwlwifi 0000:00:03.0: Status: 0x00000040, count: 6
iwlwifi 0000:00:03.0: Loaded firmware version: 29.09bd31e1.0 7265D-29.ucode
iwlwifi 0000:00:03.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN
iwlwifi 0000:00:03.0: 0x000002F1 | trm_hw_status0
iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1
iwlwifi 0000:00:03.0: 0x00043D6C | branchlink2
iwlwifi 0000:00:03.0: 0x0004AFD6 | interruptlink1
iwlwifi 0000:00:03.0: 0x000008C4 | interruptlink2
iwlwifi 0000:00:03.0: 0x00000000 | data1
iwlwifi 0000:00:03.0: 0x00000080 | data2
iwlwifi 0000:00:03.0: 0x07030000 | data3
iwlwifi 0000:00:03.0: 0x003FD4C3 | beacon time
iwlwifi 0000:00:03.0: 0x00C22AC3 | tsf low
iwlwifi 0000:00:03.0: 0x00000000 | tsf hi
iwlwifi 0000:00:03.0: 0x00000000 | time gp1
iwlwifi 0000:00:03.0: 0x00C22AC3 | time gp2
iwlwifi 0000:00:03.0: 0x00000001 | uCode revision type
iwlwifi 0000:00:03.0: 0x0000001D | uCode version major
Notice the first line: "Microcode SW error detected:" which
is printed in the driver's ISR, which means that the driver
actually got an interrupt from the firmware saying that it
crashed. And then we have the properly populated error data.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.70e67cc75d88.I6615cad4361862e7f3c9f2d3cafb6a8c61e16781@changeid
|
|
If loading the PNVM file failed on the first try during the
interface up, the file is unlikely to show up later, and we
already don't try to reload it if it changes, so just don't
try loading it again and again.
This also fixes some issues where we may try to load it at
resume time, which may not be possible yet.
Signed-off-by: Johannes Berg <[email protected]>
Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.5ac6828a0bbe.I7d308358b21d3c0c84b1086999dbc7267f86e219@changeid
|
|
Even if we don't reload the file from disk, we still need to
trigger the PNVM load flow with the device; fix that.
Signed-off-by: Johannes Berg <[email protected]>
Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.85ef56c4ef8c.I3b853ce041a0755d45e448035bef1837995d191b@changeid
|
|
If we erroneously try to set the PNVM data again after it has
already been set, we could leak the old DMA memory. Avoid that
and warn, we shouldn't be doing this.
Signed-off-by: Johannes Berg <[email protected]>
Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.929c2d680429.I086b9490e6c005f3bcaa881b617e9f61908160f3@changeid
|
|
We need to take the mutex to call iwl_mvm_get_sync_time(), do it.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.4bb5ccf881a6.I62973cbb081e80aa5b0447a5c3b9c3251a65cf6b@changeid
|
|
In the new CSA flow, we remain associated during CSA, but
still do a unbind-bind to the vif. However, sending the power
command right after when vif is unbound but still associated
causes FW to assert (0x3400) since it cannot tell the LMAC id.
Just skip this command, we will send it again in a bit, when
assigning the new context.
Signed-off-by: Sara Sharon <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.64a2254ac5c3.Iaa3a9050bf3d7c9cd5beaf561e932e6defc12ec3@changeid
|
|
|
|
Add compatible string for Cisco device present on the Cisco Petra
platform.
Signed-off-by: Daniel Walker <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add flag "SOF_RT711_JD_SRC_JD2", flag "SOF_RT715_DAI_ID_FIX"
and "SOF_SDW_FOUR_SPK" to the Dell TGL-H based SKU "0A5E".
Signed-off-by: Libin Yang <[email protected]>
Co-developed-by: Hui Wang <[email protected]>
Signed-off-by: Hui Wang <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The "dai_id" given into LPAIF_INTFDMA_REG(...) is already the real
DAI ID, not an index into v->dai_driver. Looking it up again seems
entirely redundant.
For IPQ806x (and SC7180 since commit 09a4f6f5d21c
("ASoC: dt-bindings: lpass: Fix and common up lpass dai ids") this is
now often an out-of-bounds read because the indexes in the "dai_driver"
array no longer match the actual DAI ID.
Cc: Srinivasa Rao Mandadapu <[email protected]>
Cc: Srinivas Kandagatla <[email protected]>
Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
MT8192 determines the I2S clock rates according to the sampling rates.
There is only 1 set of I2S in between MT8192 and RT5682. If playing and
capturing via RT5682 in different sampling rates, the I2S data will be
corrupted.
Adds format constraints to the corresponding DAI links to make sure the
sampling rates are symmetric.
Fixes: 18b13ff23fab ("ASoC: mediatek: mt8192: add machine driver with mt6359, rt1015 and rt5682")
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Reset (aka power off) happens when the reset gpio is made active.
Change function name to ak4458_reset to match devicetree property "reset-gpios"
Signed-off-by: Eliot Blennerhassett <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The sof-pci-dev driver fails to link when built into the kernel
and CONFIG_SND_INTEL_DSP_CONFIG is set to =m:
arm-linux-gnueabi-ld: sound/soc/sof/sof-pci-dev.o: in function `sof_pci_probe':
sof-pci-dev.c:(.text+0x1c): undefined reference to `snd_intel_dsp_driver_probe'
As a temporary fix, use IS_REACHABLE to prevent the problem from
happening. A more complete solution is to move this code to
Intel-specific parts, restructure the drivers and Kconfig as discussed
with Arnd Bergmann and Takashi Iwai.
Fixes: 82d9d54a6c0e ("ALSA: hda: add Intel DSP configuration / probe code")
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The LKP bot reports the following issue:
WARNING: unmet direct dependencies detected for SOUNDWIRE_INTEL
Depends on [m]: SOUNDWIRE [=m] && ACPI [=y] && SND_SOC [=y]
Selected by [y]:
- SND_SOC_SOF_INTEL_SOUNDWIRE [=y] && SOUND [=y] && !UML &&
SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] &&
SND_SOC_SOF_INTEL_TOPLEVEL [=y] && SND_SOC_SOF_INTEL_PCI [=y]
This comes from having tristates being configured independently, when
in practice the CONFIG_SOUNDWIRE needs to be aligned with the SOF
choices: when the SOF code is compiled as built-in, the
CONFIG_SOUNDWIRE also needs to be 'y'.
The easiest fix is to replace the 'depends' with a 'select' and have a
single user selection to activate SoundWire on Intel platforms. This
still allows regmap to be compiled independently as a module.
This is just a temporary fix, the select/depend usage will be
revisited and the SOF Kconfig re-organized, as suggested by Arnd
Bergman.
Reported-by: kernel test robot <[email protected]>
Fixes: a115ab9b8b93e ('ASoC: SOF: Intel: add build support for SoundWire')
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fixes failure with 4096x1080 resolutions
[ 284.315379] WARNING: CPU: 1 PID: 901 at drivers/gpu/drm/vc4/vc4_plane.c:981 vc4_plane_mode_set+0x1374/0x13c4
[ 284.315385] Modules linked in: ir_rc5_decoder rpivid_hevc(C) bcm2835_codec(C) bcm2835_isp(C) bcm2835_mmal_vchiq(C) bcm2835_gpiomem v4l2_mem2mem videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc cdc_acm xpad ir_rc6_decoder rc_rc6_mce gpio_ir_recv fuse
[ 284.315509] CPU: 1 PID: 901 Comm: kodi.bin Tainted: G C 5.10.7 #1
[ 284.315514] Hardware name: BCM2711
[ 284.315518] Backtrace:
[ 284.315533] [<c0cc5ca0>] (dump_backtrace) from [<c0cc6014>] (show_stack+0x20/0x24)
[ 284.315540] r7:ffffffff r6:00000000 r5:68000013 r4:c18ecf1c
[ 284.315549] [<c0cc5ff4>] (show_stack) from [<c0cca638>] (dump_stack+0xc4/0xf0)
[ 284.315558] [<c0cca574>] (dump_stack) from [<c022314c>] (__warn+0xfc/0x158)
[ 284.315564] r9:00000000 r8:00000009 r7:000003d5 r6:00000009 r5:c08cc7dc r4:c0fd09b8
[ 284.315572] [<c0223050>] (__warn) from [<c0cc67ec>] (warn_slowpath_fmt+0x74/0xe4)
[ 284.315577] r7:c08cc7dc r6:000003d5 r5:c0fd09b8 r4:00000000
[ 284.315584] [<c0cc677c>] (warn_slowpath_fmt) from [<c08cc7dc>] (vc4_plane_mode_set+0x1374/0x13c4)
[ 284.315589] r8:00000000 r7:00000000 r6:00001000 r5:c404c600 r4:c2e34600
[ 284.315596] [<c08cb468>] (vc4_plane_mode_set) from [<c08cc984>] (vc4_plane_atomic_check+0x40/0x1c0)
[ 284.315601] r10:00000001 r9:c2e34600 r8:c0e67068 r7:c0fc44e0 r6:c2ce3640 r5:c3d636c0
[ 284.315605] r4:c2e34600
[ 284.315614] [<c08cc944>] (vc4_plane_atomic_check) from [<c0860504>] (drm_atomic_helper_check_planes+0xec/0x1ec)
[ 284.315620] r9:c2e34600 r8:c0e67068 r7:c0fc44e0 r6:c2ce3640 r5:c3d636c0 r4:00000006
[ 284.315627] [<c0860418>] (drm_atomic_helper_check_planes) from [<c0860658>] (drm_atomic_helper_check+0x54/0x9c)
[ 284.315633] r9:c2e35400 r8:00000006 r7:00000000 r6:c2ba7800 r5:c3d636c0 r4:00000000
[ 284.315641] [<c0860604>] (drm_atomic_helper_check) from [<c08b7ca8>] (vc4_atomic_check+0x25c/0x454)
[ 284.315645] r7:00000000 r6:c2ba7800 r5:00000001 r4:c3d636c0
[ 284.315652] [<c08b7a4c>] (vc4_atomic_check) from [<c0881278>] (drm_atomic_check_only+0x5cc/0x7e0)
[ 284.315658] r10:c404c6c8 r9:ffffffff r8:c472c480 r7:00000003 r6:c3d636c0 r5:00000000
[ 284.315662] r4:0000003c r3:c08b7a4c
[ 284.315670] [<c0880cac>] (drm_atomic_check_only) from [<c089ba60>] (drm_mode_atomic_ioctl+0x758/0xa7c)
[ 284.315675] r10:c3d46000 r9:c3d636c0 r8:c2ce8a70 r7:027e3a54 r6:00000043 r5:c1fbb800
[ 284.315679] r4:0281a858
[ 284.315688] [<c089b308>] (drm_mode_atomic_ioctl) from [<c086e9f8>] (drm_ioctl_kernel+0xc4/0x108)
[ 284.315693] r10:c03864bc r9:c1fbb800 r8:c3d47e64 r7:c089b308 r6:00000002 r5:c2ba7800
[ 284.315697] r4:00000000
[ 284.315705] [<c086e934>] (drm_ioctl_kernel) from [<c086ee28>] (drm_ioctl+0x1e8/0x3a0)
[ 284.315711] r9:c1fbb800 r8:000000bc r7:c3d47e64 r6:00000038 r5:c0e59570 r4:00000038
[ 284.315719] [<c086ec40>] (drm_ioctl) from [<c041f354>] (sys_ioctl+0x35c/0x914)
[ 284.315724] r10:c2d08200 r9:00000000 r8:c36fa300 r7:befdd870 r6:c03864bc r5:c36fa301
[ 284.315728] r4:c03864bc
[ 284.315735] [<c041eff8>] (sys_ioctl) from [<c0200040>] (ret_fast_syscall+0x0/0x28)
[ 284.315739] Exception stack(0xc3d47fa8 to 0xc3d47ff0)
[ 284.315745] 7fa0: 027eb750 befdd870 00000000 c03864bc befdd870 00000000
[ 284.315750] 7fc0: 027eb750 befdd870 c03864bc 00000036 027e3948 0281a640 0281a850 027e3a50
[ 284.315756] 7fe0: b4b64100 befdd844 b4b5ba2c b49c994c
[ 284.315762] r10:00000036 r9:c3d46000 r8:c0200204 r7:00000036 r6:c03864bc r5:befdd870
[ 284.315765] r4:027eb750
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dom Cobley <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Dave Stevenson <[email protected]>
Tested-By: Lucas Nussbaum <[email protected]>
Tested-By: Ryutaroh Matsumoto <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
LBM base address is measured in units of pixels per cycle.
That is 4 for 2711 (hvs5) and 2 for 2708.
We are wasting 75% of lbm by indexing without the scaling.
But we were also using too high a size for the lbm resulting
in partial corruption (right hand side) of vertically
scaled images, usually at 4K or lower resolutions with more layers.
The physical RAM of LBM on 2711 is 8 * 1920 * 16 * 12-bit
(pixels are stored 12-bits per component regardless of format).
The LBM address indexes work in units of pixels per clock,
so for 4 pixels per clock that means we have 32 * 1920 = 60K
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dom Cobley <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Reviewed-by: Dave Stevenson <[email protected]>
Tested-By: Lucas Nussbaum <[email protected]>
Tested-By: Ryutaroh Matsumoto <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Adding PCI id for TGL-H. Like for other TGL platforms, SOF is used if
Soundwire codecs or PCH-DMIC is detected.
Signed-off-by: Bard Liao <[email protected]>
Reviewed-by: Xiuli Pan <[email protected]>
Reviewed-by: Libin Yang <[email protected]>
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Commit f0e386ee0c0b ("printk: fix buffer overflow potential for
print_text()") added string termination in record_print_text().
However it used the wrong base pointer for adding the terminator.
This led to a 0-byte being written somewhere beyond the buffer.
Use the correct base pointer when adding the terminator.
Fixes: f0e386ee0c0b ("printk: fix buffer overflow potential for print_text()")
Reported-by: Sven Schnelle <[email protected]>
Signed-off-by: John Ogness <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Palm ejection stops working on some Elan and Synaptics touchpad after
commit 40d5bb87377a ("HID: multitouch: enable multi-input as a quirk for
some devices").
The commit changes the mt_class from MT_CLS_WIN_8 to
MT_CLS_WIN_8_FORCE_MULTI_INPUT, so MT_QUIRK_CONFIDENCE isn't applied
anymore.
So also apply the quirk since MT_CLS_WIN_8_FORCE_MULTI_INPUT is
essentially MT_CLS_WIN_8.
Fixes: 40d5bb87377a ("HID: multitouch: enable multi-input as a quirk for some devices")
Cc: [email protected]
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Once we have called device_initialize(), we should use put_device() to
give up the reference on error, just like what we have done on failure
of device_add().
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
In case of blk_mq_is_sbitmap_shared(), we should test QUEUE_FLAG_HCTX_ACTIVE against
q->queue_flags instead of BLK_MQ_S_TAG_ACTIVE.
So fix it.
Cc: John Garry <[email protected]>
Cc: Kashyap Desai <[email protected]>
Fixes: f1b49fdc1c64 ("blk-mq: Record active_queues_shared_sbitmap per tag_set for when using shared sbitmap")
Signed-off-by: Ming Lei <[email protected]>
Reviewed-by: John Garry <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
If a layoutget ends up being reordered w.r.t. a layoutreturn, e.g. due
to a layoutget-on-open not knowing a priori which file to lock, then we
must assume the layout is no longer being considered valid state by the
server.
Incrementally improve our ability to reject such states by using the
cached old stateid in conjunction with the plh_barrier to try to
identify them.
Signed-off-by: Trond Myklebust <[email protected]>
|
|
When we're scheduling a layoutreturn, we need to ignore any further
incoming layouts with sequence ids that are going to be affected by the
layout return.
Fixes: 44ea8dfce021 ("NFS/pnfs: Reference the layout cred in pnfs_prepare_layoutreturn()")
Signed-off-by: Trond Myklebust <[email protected]>
|
|
If the server returns a new stateid that does not match the one in our
cache, then try to return the one we hold instead of just invalidating
it on the client side. This ensures that both client and server will
agree that the stateid is invalid.
Signed-off-by: Trond Myklebust <[email protected]>
|
|
If the server returns a new stateid that does not match the one in our
cache, then pnfs_layout_process() will leak the layout segments returned
by pnfs_mark_layout_stateid_invalid().
Fixes: 9888d837f3cf ("pNFS: Force a retry of LAYOUTGET if the stateid doesn't match our cache")
Signed-off-by: Trond Myklebust <[email protected]>
|
|
This normally doesn't cause any extra harm, but it does mean that we'll
increment the eventfd notification count, if one has been registered
with the ring. This can confuse applications, when they see more
notifications on the eventfd side than are available in the ring.
Do the nice thing and only increment this count, if we actually posted
(or even overflowed) events.
Reported-and-tested-by: Dan Melnic <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Ensure we match tasks that belong to a dead or dying task as well, as we
need to reap those in addition to those belonging to the exiting task.
Cc: [email protected] # 5.9+
Reported-by: Josef Grieb <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
|
|
Pull arch/sh updates from Rich Felker:
"Cleanup and warning fixes"
* tag 'sh-for-5.11' of git://git.libc.org/linux-sh:
sh/intc: Restore devm_ioremap() alignment
sh: mach-sh03: remove duplicate include
arch: sh: remove duplicate include
sh: Drop ARCH_NR_GPIOS definition
sh: Remove unused HAVE_COPY_THREAD_TLS macro
sh: remove CONFIG_IDE from most defconfig
sh: mm: Convert to DEFINE_SHOW_ATTRIBUTE
sh: intc: Convert to DEFINE_SHOW_ATTRIBUTE
arch/sh: hyphenate Non-Uniform in Kconfig prompt
sh: dma: fix kconfig dependency for G2_DMA
|