| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Update asm/netlogic/haldefs.h to extend register access functions
nlm_{read,write}_reg64() for 32-bit compilation. When compiled for 32-bit
the functions will read 64 IO registers with interrupts disabled.
Signed-off-by: Jayachandran C <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5026/
Acked-by: John Crispin <[email protected]>
|
|
The index for a device interrupt in the PIC interrupt routing table
changes for different chips in the XLP family. Avoid using the fixed
entries and derive the index value from the SoC device header.
Add workarounds for some devices which do not report the IRT index
correctly.
Signed-off-by: Jayachandran C <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5025/
Acked-by: John Crispin <[email protected]>
|
|
Use standard function to print cpumask. Also fixup the name of the
variable used and make it static.
Signed-off-by: Jayachandran C <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5024/
Acked-by: John Crispin <[email protected]>
|
|
Remove the definitions of {read,write}_c0_{eirr,eimr}. These functions
are now unused after the PIC and IRQ code has been updated to use
optimized EIMR/EIRR functions which work on both 32-bit and 64-bit.
Signed-off-by: Jayachandran C <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5021/
Acked-by: John Crispin <[email protected]>
|
|
Remove the irq save/restore from write_c0_eimr(), as it is always called
with interrupts off.
This allows us to remove workaround in write_c0_eimr() to fix up the
flags used by local_irq_save. This fixup worked on XLR, but will break
when 32-bit support is added to r2 cpus like XLP.
Signed-off-by: Jayachandran C <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5022/
Acked-by: John Crispin <[email protected]>
|
|
All the header file does is provide the internal structure of clk,
which shouldn't be used by anyone except clk.c itself anyway.
Signed-off-by: Jonas Gorski <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5055/
Acked-by: John Crispin <[email protected]>
|
|
BCM6362 support booting from SPI flash and NAND.
Signed-off-by: Jonas Gorski <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5012/
Acked-by: John Crispin <[email protected]>
|
|
The PCIe controller is almost the same as the BCM6328 one, with only
the SERDES register being at a different location.
Signed-off-by: Jonas Gorski <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5011/
Acked-by: John Crispin <[email protected]>
|
|
The SPI controller shares the same register layout as the 6358 one.
Signed-off-by: Jonas Gorski <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5010/
Acked-by: John Crispin <[email protected]>
|
|
Add basic support for detecting and booting the BCM6362.
Signed-off-by: Jonas Gorski <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5009/
Acked-by: John Crispin <[email protected]>
|
|
Instead of trying to use a correlation of cpu prid and chip id and
hoping they will always be unique, use the cpu prid to determine the
chip id register location and just read out the chip id.
Signed-off-by: Jonas Gorski <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5008/
Acked-by: John Crispin <[email protected]>
|
|
The REVID is only 8 bit wide.
Signed-off-by: Jonas Gorski <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5007/
Acked-by: John Crispin <[email protected]>
|
|
BCM6338 and BCM6348, and BCM6358 and everything after that share the
same register layout. To not have to redefine them for each new chip
and keep the code size small, only use the definitions for the first
chip with the certain layout.
Signed-off-by: Jonas Gorski <[email protected]>
Patchwork: http://patchwork.linux-mips.org/patch/5006/
Acked-by: John Crispin <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set
x86/mm/cpa/selftest: Fix false positive in CPA self test
x86/mm/cpa: Convert noop to functional fix
x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metal
x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixlets"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Fix accounting on multi-threaded processes
sched/debug: Fix sd->*_idx limit range avoiding overflow
sched_clock: Prevent 64bit inatomicity on 32bit systems
sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Misc fixlets"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix error return code
ftrace: Fix strncpy() use, use strlcpy() instead of strncpy()
perf: Fix strncpy() use, use strlcpy() instead of strncpy()
perf: Fix strncpy() use, always make sure it's NUL terminated
perf: Fix ring_buffer perf_output_space() boundary calculation
perf/x86: Fix uninitialized pt_regs in intel_pmu_drain_bts_buffer()
|
|
Pull drm fixes from Dave Airlie:
"One fix for a hotplug locking regressions, and one fix for an oops if
you unplug the monitor at an inopportune moment on the udl device."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/fb-helper: Fix locking in drm_fb_helper_hotplug_event
udl: handle EDID failure properly.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu fix from Greg Ungerer:
"This contains only a single compilation fix for ColdFire m68k targets
that use local non-GPIOLIB support."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: define a local gpio_request_one() function
|
|
Pull watchdog fix from Wim Van Sebroeck:
"It will fix compile errors for the at91rm9200_wdt driver"
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: Revert the AT91RM9200_WATCHDOG dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull one more btrfs fix from Chris Mason:
"This has a recent fix from Josef for our tree log replay code. It
fixes problems where the inode counter for the number of bytes in the
file wasn't getting updated properly during fsync replay.
The commit did get rebased this morning, but it was only to clean up
the subject line. The code hasn't changed."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: make sure nbytes are right after log replay
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace fixes from Steven Rostedt:
"Namhyung Kim found and fixed a bug that can crash the kernel by simply
doing: echo 1234 | tee -a /sys/kernel/debug/tracing/set_ftrace_pid
Luckily, this can only be done by root, but still is a nasty bug."
* tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section
tracing: Fix possible NULL pointer dereferences
|
|
Nothing is using it yet, but this will allow us to delay the open-time
checks to use time, without breaking the normal UNIX permission
semantics where permissions are determined by the opener (and the file
descriptor can then be passed to a different process, or the process can
drop capabilities).
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Compiling the at91rm9200_wdt.c driver without at91rm9200
support was leading to several errors:
drivers/built-in.o: In function `at91_wdt_close':
at91_adc.c:(.text+0xc9fe4): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_write':
at91_adc.c:(.text+0xca004): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_shutdown':
at91_adc.c:(.text+0xca01c): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_suspend':
at91_adc.c:(.text+0xca038): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_open':
at91_adc.c:(.text+0xca0cc): undefined reference to `at91_st_base'
drivers/built-in.o:at91_adc.c:(.text+0xca2c8): more undefined references to
`at91_st_base' follow
So, reverting the modification of the "depends" Kconfig line
introduced by patch a6a1bcd37 (watchdog: at91rm9200: add DT support)
seems to be the good solution.
Signed-off-by: Nicolas Ferre <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
Revert commit 62a3ddef6181 ("vfs: fix spinning prevention in prune_icache_sb").
This commit doesn't look right: since we are looking at the tail of the
list (sb->s_inode_lru.prev) if we want to skip an inode, we should put
it back at the head of the list instead of the tail, otherwise we will
keep spinning on it.
Discovered when investigating why prune_icache_sb came top in perf
reports of a swapping load.
Signed-off-by: Suleiman Souhlal <[email protected]>
Signed-off-by: Hugh Dickins <[email protected]>
Cc: [email protected] # v3.2+
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Anatol Pomozov identified a race condition that hits module unloading
and re-loading. To quote Anatol:
"This is a race codition that exists between kset_find_obj() and
kobject_put(). kset_find_obj() might return kobject that has refcount
equal to 0 if this kobject is freeing by kobject_put() in other
thread.
Here is timeline for the crash in case if kset_find_obj() searches for
an object tht nobody holds and other thread is doing kobject_put() on
the same kobject:
THREAD A (calls kset_find_obj()) THREAD B (calls kobject_put())
splin_lock()
atomic_dec_return(kobj->kref), counter gets zero here
... starts kobject cleanup ....
spin_lock() // WAIT thread A in kobj_kset_leave()
iterate over kset->list
atomic_inc(kobj->kref) (counter becomes 1)
spin_unlock()
spin_lock() // taken
// it does not know that thread A increased counter so it
remove obj from list
spin_unlock()
vfree(module) // frees module object with containing kobj
// kobj points to freed memory area!!
kobject_put(kobj) // OOPS!!!!
The race above happens because module.c tries to use kset_find_obj()
when somebody unloads module. The module.c code was introduced in
commit 6494a93d55fa"
Anatol supplied a patch specific for module.c that worked around the
problem by simply not using kset_find_obj() at all, but rather than make
a local band-aid, this just fixes kset_find_obj() to be thread-safe
using the proper model of refusing the get a new reference if the
refcount has already dropped to zero.
See examples of this proper refcount handling not only in the kref
documentation, but in various other equivalent uses of this pattern by
grepping for atomic_inc_not_zero().
[ Side note: the module race does indicate that module loading and
unloading is not properly serialized wrt sysfs information using the
module mutex. That may require further thought, but this is the
correct fix at the kobject layer regardless. ]
Reported-analyzed-and-tested-by: Anatol Pomozov <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Al Viro <[email protected]>
Cc: [email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
While trying to track down a tree log replay bug I noticed that fsck was always
complaining about nbytes not being right for our fsynced file. That is because
the new fsync stuff doesn't wait for ordered extents to complete, so the inodes
nbytes are not necessarily updated properly when we log it. So to fix this we
need to set nbytes to whatever it is on the inode that is on disk, so when we
replay the extents we can just add the bytes that are being added as we replay
the extent. This makes it work for the case that we have the wrong nbytes or
the case that we logged everything and nbytes is actually correct. With this
I'm no longer getting nbytes errors out of btrfsck.
Cc: [email protected]
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: Chris Mason <[email protected]>
|
|
This patch attempts to fix:
https://bugzilla.kernel.org/show_bug.cgi?id=56461
The symptom is a crash and messages like this:
chrome: Corrupted page table at address 34a03000
*pdpt = 0000000000000000 *pde = 0000000000000000
Bad pagetable: 000f [#1] PREEMPT SMP
Ingo guesses this got introduced by commit 611ae8e3f520 ("x86/tlb:
enable tlb flush range support for x86") since that code started to free
unused pagetables.
On x86-32 PAE kernels, that new code has the potential to free an entire
PMD page and will clear one of the four page-directory-pointer-table
(aka pgd_t entries).
The hardware aggressively "caches" these top-level entries and invlpg
does not actually affect the CPU's copy. If we clear one we *HAVE* to
do a full TLB flush, otherwise we might continue using a freed pmd page.
(note, we do this properly on the population side in pud_populate()).
This patch tracks whenever we clear one of these entries in the 'struct
mmu_gather', and ensures that we follow up with a full tlb flush.
BTW, I disassembled and checked that:
if (tlb->fullmm == 0)
and
if (!tlb->fullmm && !tlb->need_flush_all)
generate essentially the same code, so there should be zero impact there
to the !PAE case.
Signed-off-by: Dave Hansen <[email protected]>
Cc: Peter Anvin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Artem S Tashkinov <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull SCSI target fixes from Nicholas Bellinger:
"Here are remaining target-pending items for v3.9-rc7 code.
The tcm_vhost patches are more than I'd usually include in a -rc7
pull, but are changes required for v3.9 to work correctly with the
pending vhost-scsi-pci QEMU upstream series merge. (Paolo CC'ed)
Plus Asias's conversion to use vhost_virtqueue->private_data + RCU for
managing vhost-scsi endpoints has gotten alot of review + testing over
the past weeks, and MST has ACKed the full series.
Also, there is a target patch to fix a long-standing bug within
control CDB handling with Standby/Offline/Transition ALUA port access
states, that had been incorrectly rejecting the control CDBs required
for LUN scan to work during these port group states. CC'ing to
stable."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBs
tcm_vhost: Send bad target to guest when cmd fails
tcm_vhost: Add vhost_scsi_send_bad_target() helper
tcm_vhost: Fix tv_cmd leak in vhost_scsi_handle_vq
tcm_vhost: Remove double check of response
tcm_vhost: Initialize vq->last_used_idx when set endpoint
tcm_vhost: Use vq->private_data to indicate if the endpoint is setup
tcm_vhost: Use ACCESS_ONCE for vs->vs_tpg[target] access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of ten bug fixes (and two consisting of copyright year
update and version number change) pretty much all of which involve
either a crash or a hang except the removal of the random sleep from
the qla2xxx driver (which is a coding error so bad, we want it gone
before anyone has a chance to copy it)."
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] lpfc: fix potential NULL pointer dereference in lpfc_sli4_rq_put()
[SCSI] libsas: fix handling vacant phy in sas_set_ex_phy()
[SCSI] ibmvscsi: Fix slave_configure deadlock
[SCSI] qla2xxx: Update the driver version to 8.04.00.13-k.
[SCSI] qla2xxx: Remove debug code that msleeps for random duration.
[SCSI] qla2xxx: Update copyright dates information in LICENSE.qla2xxx file.
[SCSI] qla2xxx: Fix crash during firmware dump procedure.
[SCSI] Revert "qla2xxx: Add setting of driver version string for vendor application."
[SCSI] ipr: dlpar failed when adding an adapter back
[SCSI] ipr: fix addition of abort command to HRRQ free queue
[SCSI] st: Take additional queue ref in st_probe
[SCSI] libsas: use right function to alloc smp response
[SCSI] ipr: ipr_test_msi() fails when running with msi-x enabled adapter
|
|
Pull CIFS fix from Steve French:
"Fixes a regression in cifs in which a password which begins with a
comma is parsed incorrectly as a blank password"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Allow passwords which begin with a delimitor
|
|
As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to
be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the
ftrace_pid_fops is defined when DYNAMIC_FTRACE is not.
Cc: [email protected]
Cc: Namhyung Kim <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
|
|
Currently set_ftrace_pid and set_graph_function files use seq_lseek
for their fops. However seq_open() is called only for FMODE_READ in
the fops->open() so that if an user tries to seek one of those file
when she open it for writing, it sees NULL seq_file and then panic.
It can be easily reproduced with following command:
$ cd /sys/kernel/debug/tracing
$ echo 1234 | sudo tee -a set_ftrace_pid
In this example, GNU coreutils' tee opens the file with fopen(, "a")
and then the fopen() internally calls lseek().
Link: http://lkml.kernel.org/r/[email protected]
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: [email protected]
Signed-off-by: Namhyung Kim <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains a few small ASoC fixes (wm8903, wm5102, samsung-i2s,
tegra, and soc-compress) and an endian fix for NI USB-audio devices,
update for Mark's e-mail address.
No scary changes, AFAIS."
* tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
MAINTAINERS: Update e-mail address
ASoC: wm5102: Correct lookup of arizona struct in SYSCLK event
ASoC: wm8903: Fix the bypass to HP/LINEOUT when no DAC or ADC is running
ALSA: usb-audio: fix endianness bug in snd_nativeinstruments_*
ASoC: tegra: Don't claim to support PCM pause and resume
ASoC: Samsung: set drvdata before adding secondary device
ASoC: Samsung: return error if drvdata is not set
ASoC: compress: Cancel delayed power down if needed
ASoC: core: Fix to check return value of snd_soc_update_bits_locked()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
MAINTAINERS: Update e-mail address
Update the e-mail address I use for subsystems.
|
|
Update the e-mail address I use for subsystems.
Signed-off-by: Mark Brown <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v3.9
A few updates, more than I'd like, fixing some relatively small issues
but mostly driver specific ones. Nothing wildly exciting so if it
doesn't make v3.9 it won't be the end of the world but it'd be nice.
|
|
When CONFIG_DEBUG_PAGEALLOC is set page table updates made by
kernel_map_pages() are not made visible (via TLB flush)
immediately if lazy MMU is on. In environments that support lazy
MMU (e.g. Xen) this may lead to fatal page faults, for example,
when zap_pte_range() needs to allocate pages in
__tlb_remove_page() -> tlb_next_batch().
Signed-off-by: Boris Ostrovsky <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
If the pmd is not present, _PAGE_PSE will not be set anymore.
Fix the false positive.
Reported-by: Ingo Molnar <[email protected]>
Signed-off-by: Andrea Arcangeli <[email protected]>
Cc: Stefan Bader <[email protected]>
Cc: Andy Whitcroft <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Borislav Petkov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Fix to return -ENOMEM in the allocation error case instead of 0
(if pmu_bus_running == 1), as done elsewhere in this function.
Signed-off-by: Wei Yongjun <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: http://lkml.kernel.org/r/CAPgLHd8j_fWcgqe%3DKLWjpBj%2B%3Do0Pw6Z-SEq%[email protected]
[ Tweaked the error code setting placement and the changelog. ]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Driver's and ->fill_modes functions are allowed to grab crtc mutexes
(for e.g. load detect). Hence we need to first only grab the general
kms mutex, and only in a second step grab all locks to do the
modesets.
This prevents a deadlock on my gm45 in the tv load detect code called
by drm_helper_probe_single_connector_modes.
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
Don't oops seems proper.
Cc: [email protected]
Signed-off-by: Dave Airlie <[email protected]>
|
|
Pull slave-dmaengine fixes from Vinod Koul:
"The first one fixes issue in pl330 to check for DT compatible and
the second one fixes omap-dma to start without delay"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: omap-dma: Start DMA without delay for cyclic channels
DMA: PL330: Add check if device tree compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- System reboot/halt fix related to CPU offline ordering from Huacai
Chen.
- intel_pstate driver fix for a delay time computation error
occasionally crashing systems using it from Dirk Brandewie.
* tag 'pm-3.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()
cpufreq / intel_pstate: Set timer timeout correctly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap revert from Mark Brown:
"regmap: Back out work buffer fix
This reverts commit bc8ce4 (regmap: don't corrupt work buffer in
_regmap_raw_write()) since it turns out that it can cause issues when
taken in isolation from the other changes in -next that lead to its
discovery. On the basis that nobody noticed the problems for quite
some time without that subsequent work let's drop it from v3.9."
* tag 'regmap-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Back out work buffer fix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"Oneliner fix for the PCA 953x driver."
* tag 'gpio-fixes-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: fix irq_domain_add_simple usage
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC bug fixes from Arnd Bergmann:
"A little later during the week than the last few pull requests, since
there was very little that came in before 3.9-rc6. At least things
have calmed down again here.
Some important bug fixes that came in over the last 10 days, mostly
mvebu and imx:
- Multiple regressions on i.mx following the conversion of the clock
code, hopefully the last we are seeing of those.
- a regression in the mvebu irq handling code
- An incorrect register offset in the rewritten s3c24xx irq code.
- Two bugs in setting up the iomega_ix2_200 machine
- Turning on an extra bus clock on imx
- A MAINTAINERS file entry for Roland Stigge"
* tag 'arm-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm: mvebu: Fix the irq map function in SMP mode
Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
ARM: S3C24XX: Fix interrupt pending register offset of the EINT controller
ARM: S3C24XX: Correct NR_IRQS definition for s3c2440
ARM i.MX6: Fix ldb_di clock selection
ARM: imx: provide twd clock lookup from device tree
ARM: imx35 Bugfix admux clock
ARM: clk-imx35: Bugfix iomux clock
ARM: mxs: Slow down the I2C clock speed
MAINTAINERS: Add maintainer for LPC32xx
ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED
|
|
The dereference to 'put_index' should be moved below the NULL test.
Signed-off-by: Wei Yongjun <[email protected]>
Acked-by: James Smart <[email protected]>
Signed-off-by: James Bottomley <[email protected]>
|
|
We actually have to pass chip as the host_data parameter of
irq_domain_add_simple() as later on, it is used to initialize chip_data
in pca953x_gpio_irq_map(). Failing to do so is leading to a NULL pointer
dereference after calling irq_data_get_irq_chip_data() in
pca953x_irq_mask(), pca953x_irq_unmask(), pca953x_irq_bus_lock(),
pca953x_irq_bus_sync_unlock() and pca953x_irq_set_type().
Fixes regression introduced by commit
0e8f2fdacf1d44651aa7e57063c76142d1f4988b (gpio: pca953x: use simple
irqdomain)
Signed-off-by: Alexandre Belloni <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
|