| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
'clk-sophgo' into clk-next
- Add glitch free PLL setting support to si5351 clk driver
* clk-versa:
clk: versaclock3: Drop ret variable
clk: versaclock3: Add missing space between ')' and '{'
clk: versaclock3: Use u8 return type for get_parent() callback
clk: versaclock3: Avoid unnecessary padding
clk: versaclock3: Update vc3_get_div() to avoid divide by zero
* clk-silabs:
clk: si5351: allow PLLs to be adjusted without reset
dt-bindings: clock: si5351: add PLL reset mode property
dt-bindings: clock: si5351: convert to yaml
* clk-samsung:
clk: samsung: Improve kernel-doc comments
clk: samsung: Fix kernel-doc comments
* clk-starfive:
clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
clk: starfive: Add flags argument to JH71X0__MUX macro
* clk-sophgo:
dt-bindings: clock: sophgo: Add clock controller of CV1800 series SoC
|
|
'clk-cleanup' into clk-next
* clk-renesas:
clk: renesas: r9a08g045: Add clock and reset support for ETH0 and ETH1
clk: renesas: rzg2l: Check reset monitor registers
clk: renesas: r9a08g045: Add IA55 pclk and its reset
clk: renesas: rzg2l-cpg: Reuse code in rzg2l_cpg_reset()
clk: renesas: r8a779g0: Add PCIe clocks
clk: renesas: r8a779g0: Add EtherTSN clock
* clk-rockchip:
clk: rockchip: rk3568: Mark pclk_usb as critical
clk: rockchip: rk3568: Add PLL rate for 126.4MHz
clk: rockchip: rk3568: Add PLL rate for 115.2MHz
* clk-allwinner:
clk: sunxi-ng: nkm: remove redundant initialization of tmp_parent
* clk-cleanup:
clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw
clk: si5341: fix an error code problem in si5341_output_clk_set_rate
clk: microchip: mpfs-ccc: replace include of asm-generic/errno-base.h
clk: rs9: Fix DIF OEn bit placement on 9FGV0241
clk: mmp: pxa168: Fix memory leak in pxa168_clk_init()
clk: hi3620: Fix memory leak in hi3620_mmc_clk_init()
clk: sp7021: fix return value check in sp7021_clk_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
|
Send lease break notification on FILE_RENAME_INFORMATION request.
This patch fix smb2.lease.v2_epoch2 test failure.
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
When file is changed using notepad on read-only share(read_only = yes in
ksmbd.conf), There is a problem where existing data is truncated.
notepad in windows try to O_TRUNC open(FILE_OVERWRITE_IF) and all data
in file is truncated. This patch don't allow O_TRUNC open on read-only
share and add KSMBD_TREE_CONN_FLAG_WRITABLE check in smb2_set_info().
Cc: [email protected]
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
In of_parse_phandle_with_args_map() the inner loop that
iterates through the map entries calls of_node_put(new)
to free the reference acquired by the previous iteration
of the inner loop. This assumes that the value of "new" is
NULL on the first iteration of the inner loop.
Make sure that this is true in all iterations of the outer
loop by setting "new" to NULL after its value is assigned to "cur".
Extend the unittest to detect the double free and add an additional
test case that actually triggers this path.
Fixes: bd6f2fd5a1 ("of: Support parsing phandle argument lists through a nexus node")
Cc: Stephen Boyd <[email protected]>
Signed-off-by: "Christian A. Ehrhardt" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Fix all kernel-doc warnings in vfs.c:
vfs.c:54: warning: Function parameter or member 'parent' not described in 'ksmbd_vfs_lock_parent'
vfs.c:54: warning: Function parameter or member 'child' not described in 'ksmbd_vfs_lock_parent'
vfs.c:54: warning: No description found for return value of 'ksmbd_vfs_lock_parent'
vfs.c:372: warning: Function parameter or member 'fp' not described in 'ksmbd_vfs_read'
vfs.c:372: warning: Excess function parameter 'fid' description in 'ksmbd_vfs_read'
vfs.c:489: warning: Function parameter or member 'fp' not described in 'ksmbd_vfs_write'
vfs.c:489: warning: Excess function parameter 'fid' description in 'ksmbd_vfs_write'
vfs.c:555: warning: Function parameter or member 'path' not described in 'ksmbd_vfs_getattr'
vfs.c:555: warning: Function parameter or member 'stat' not described in 'ksmbd_vfs_getattr'
vfs.c:555: warning: Excess function parameter 'work' description in 'ksmbd_vfs_getattr'
vfs.c:555: warning: Excess function parameter 'fid' description in 'ksmbd_vfs_getattr'
vfs.c:555: warning: Excess function parameter 'attrs' description in 'ksmbd_vfs_getattr'
vfs.c:572: warning: Function parameter or member 'p_id' not described in 'ksmbd_vfs_fsync'
vfs.c:595: warning: Function parameter or member 'work' not described in 'ksmbd_vfs_remove_file'
vfs.c:595: warning: Function parameter or member 'path' not described in 'ksmbd_vfs_remove_file'
vfs.c:595: warning: Excess function parameter 'name' description in 'ksmbd_vfs_remove_file'
vfs.c:633: warning: Function parameter or member 'work' not described in 'ksmbd_vfs_link'
vfs.c:805: warning: Function parameter or member 'fp' not described in 'ksmbd_vfs_truncate'
vfs.c:805: warning: Excess function parameter 'fid' description in 'ksmbd_vfs_truncate'
vfs.c:846: warning: Excess function parameter 'size' description in 'ksmbd_vfs_listxattr'
vfs.c:953: warning: Function parameter or member 'option' not described in 'ksmbd_vfs_set_fadvise'
vfs.c:953: warning: Excess function parameter 'options' description in 'ksmbd_vfs_set_fadvise'
vfs.c:1167: warning: Function parameter or member 'um' not described in 'ksmbd_vfs_lookup_in_dir'
vfs.c:1203: warning: Function parameter or member 'work' not described in 'ksmbd_vfs_kern_path_locked'
vfs.c:1641: warning: No description found for return value of 'ksmbd_vfs_init_kstat'
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Namjae Jeon <[email protected]>
Cc: Steve French <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Tom Talpey <[email protected]>
Cc: [email protected]
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Fix 12 of 17 kernel-doc warnings in auth.c:
auth.c:221: warning: Function parameter or member 'conn' not described in 'ksmbd_auth_ntlmv2'
auth.c:221: warning: Function parameter or member 'cryptkey' not described in 'ksmbd_auth_ntlmv2'
auth.c:305: warning: Function parameter or member 'blob_len' not described in 'ksmbd_decode_ntlmssp_auth_blob'
auth.c:305: warning: Function parameter or member 'conn' not described in 'ksmbd_decode_ntlmssp_auth_blob'
auth.c:305: warning: Excess function parameter 'usr' description in 'ksmbd_decode_ntlmssp_auth_blob'
auth.c:385: warning: Function parameter or member 'blob_len' not described in 'ksmbd_decode_ntlmssp_neg_blob'
auth.c:385: warning: Function parameter or member 'conn' not described in 'ksmbd_decode_ntlmssp_neg_blob'
auth.c:385: warning: Excess function parameter 'rsp' description in 'ksmbd_decode_ntlmssp_neg_blob'
auth.c:385: warning: Excess function parameter 'sess' description in 'ksmbd_decode_ntlmssp_neg_blob'
auth.c:413: warning: Function parameter or member 'conn' not described in 'ksmbd_build_ntlmssp_challenge_blob'
auth.c:413: warning: Excess function parameter 'rsp' description in 'ksmbd_build_ntlmssp_challenge_blob'
auth.c:413: warning: Excess function parameter 'sess' description in 'ksmbd_build_ntlmssp_challenge_blob'
The other 5 are only present when a W=1 kernel build is done or
when scripts/kernel-doc is run with -Wall. They are:
auth.c:81: warning: No description found for return value of 'ksmbd_gen_sess_key'
auth.c:385: warning: No description found for return value of 'ksmbd_decode_ntlmssp_neg_blob'
auth.c:413: warning: No description found for return value of 'ksmbd_build_ntlmssp_challenge_blob'
auth.c:577: warning: No description found for return value of 'ksmbd_sign_smb2_pdu'
auth.c:628: warning: No description found for return value of 'ksmbd_sign_smb3_pdu'
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Namjae Jeon <[email protected]>
Cc: Steve French <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Tom Talpey <[email protected]>
Cc: [email protected]
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_range() is inclusive. So change a 0xFFFFFFFF into a 0xFFFFFFFE in
order to keep the same behavior.
Signed-off-by: Christophe JAILLET <[email protected]>
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
If existing lease state and request state are same, don't increment
epoch in create context.
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
smb2_set_ea() can be called in parent inode lock range.
So add get_write argument to smb2_set_ea() not to call nested
mnt_want_write().
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
If file opened with v2 lease is upgraded with v1 lease, smb server
should response v2 lease create context to client.
This patch fix smb2.lease.v2_epoch2 test failure.
This test case assumes the following scenario:
1. smb2 create with v2 lease(R, LEASE1 key)
2. smb server return smb2 create response with v2 lease context(R,
LEASE1 key, epoch + 1)
3. smb2 create with v1 lease(RH, LEASE1 key)
4. smb server return smb2 create response with v2 lease context(RH,
LEASE1 key, epoch + 2)
i.e. If same client(same lease key) try to open a file that is being
opened with v2 lease with v1 lease, smb server should return v2 lease.
Signed-off-by: Namjae Jeon <[email protected]>
Acked-by: Tom Talpey <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
The SMB2 Protocol requires that "The first byte of the Direct TCP
transport packet header MUST be zero (0x00)"[1]. Commit 1c1bcf2d3ea0
("ksmbd: validate smb request protocol id") removed the validation of
this 1-byte zero. Add the validation back now.
[1]: [MS-SMB2] - v20230227, page 30.
https://winprotocoldoc.blob.core.windows.net/productionwindowsarchives/MS-SMB2/%5bMS-SMB2%5d-230227.pdf
Fixes: 1c1bcf2d3ea0 ("ksmbd: validate smb request protocol id")
Signed-off-by: Li Nan <[email protected]>
Acked-by: Tom Talpey <[email protected]>
Acked-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- SLUB: delayed freezing of CPU partial slabs (Chengming Zhou)
Freezing is an operation involving double_cmpxchg() that makes a slab
exclusive for a particular CPU. Chengming noticed that we use it also
in situations where we are not yet installing the slab as the CPU
slab, because freezing also indicates that the slab is not on the
shared list. This results in redundant freeze/unfreeze operation and
can be avoided by marking separately the shared list presence by
reusing the PG_workingset flag.
This approach neatly avoids the issues described in 9b1ea29bc0d7
("Revert "mm, slub: consider rest of partial list if acquire_slab()
fails"") as we can now grab a slab from the shared list in a quick
and guaranteed way without the cmpxchg_double() operation that
amplifies the lock contention and can fail.
As a result, lkp has reported 34.2% improvement of
stress-ng.rawudp.ops_per_sec
- SLAB removal and SLUB cleanups (Vlastimil Babka)
The SLAB allocator has been deprecated since 6.5 and nobody has
objected so far. We agreed at LSF/MM to wait until the next LTS,
which is 6.6, so we should be good to go now.
This doesn't yet erase all traces of SLAB outside of mm/ so some dead
code, comments or documentation remain, and will be cleaned up
gradually (some series are already in the works).
Removing the choice of allocators has already allowed to simplify and
optimize the code wiring up the kmalloc APIs to the SLUB
implementation.
* tag 'slab-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (34 commits)
mm/slub: free KFENCE objects in slab_free_hook()
mm/slub: handle bulk and single object freeing separately
mm/slub: introduce __kmem_cache_free_bulk() without free hooks
mm/slub: fix bulk alloc and free stats
mm/slub: optimize free fast path code layout
mm/slub: optimize alloc fastpath code layout
mm/slub: remove slab_alloc() and __kmem_cache_alloc_lru() wrappers
mm/slab: move kmalloc() functions from slab_common.c to slub.c
mm/slab: move kmalloc_slab() to mm/slab.h
mm/slab: move kfree() from slab_common.c to slub.c
mm/slab: move struct kmem_cache_node from slab.h to slub.c
mm/slab: move memcg related functions from slab.h to slub.c
mm/slab: move pre/post-alloc hooks from slab.h to slub.c
mm/slab: consolidate includes in the internal mm/slab.h
mm/slab: move the rest of slub_def.h to mm/slab.h
mm/slab: move struct kmem_cache_cpu declaration to slub.c
mm/slab: remove mm/slab.c and slab_def.h
mm/mempool/dmapool: remove CONFIG_DEBUG_SLAB ifdefs
mm/slab: remove CONFIG_SLAB code from slab common code
cpu/hotplug: remove CPUHP_SLAB_PREPARE hooks
...
|
|
If the location of the kernel sources contains the string that we're
filtering for using DT_SCHEMA_FILES, then all schemas will currently be
matched, returned and checked, not just the ones we actually expected.
As an example, if the kernel sources happen to be below a directory
'google', and DT_SCHEMA_FILES=google, everything is checked. More
common examples might be having the sources below people's home
directories that contain the string st or arm and then searching for
those. The list is endless.
Fix this by only matching for schemas below the kernel source's
bindings directory.
Note that I opted for the implementation here so as to not having to
deal with escaping DT_SCHEMA_FILES, which would have been the
alternative if the grep match itself had been updated.
Cc: Masahiro Yamada <[email protected]>
Signed-off-by: André Draszik <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
property.c:1220 : Fixed excess struct member definition warning
property.c:444 : Fixed missing a blank line after declarations
Signed-off-by: Muzammil Ashraf <[email protected]>
Reviewed-by: Randy Dunlap <[email protected]>
Tested-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
A driver for Microsoft's firmware-based Trusted Platform Module (fTPM)
was merged with commit 09e574831b27 ("tpm/tpm_ftpm_tee: A driver for
firmware TPM running inside TEE"), but its devicetree bindings were not.
This is the only remaining undocumented compatible string for a TPM,
so add a DT schema based on the patch linked below.
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Lukas Wunner <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/99523409eb5aec9276055ff358ae6f2ceb10be6d.1702806810.git.lukas@wunner.de
Signed-off-by: Rob Herring <[email protected]>
|
|
Convert the devicetree bindings for the IBM Virtual Trusted Platform
Module to DT schema. Drop properties which are already documented in
tpm-common.yaml.
Document the "IBM,vtpm20" compatible string introduced by commit
18b3670d79ae ("tpm: ibmvtpm: Add support for TPM2").
Signed-off-by: Lukas Wunner <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/5c41e045dfe7cc3f27dd41c08c62ed8c4a90d8a4.1702806810.git.lukas@wunner.de
Signed-off-by: Rob Herring <[email protected]>
|
|
Convert the devicetree bindings for the Google Security Chip H1 running
Cr50 firmware to DT schema.
The chip can be attached to SPI or I²C. Existing devicetrees use the
same "google,cr50" compatible string for both cases without additionally
specifying a generic "tcg,tpm_tis-spi" or "tcg,tpm-tis-i2c" compatible.
The chip therefore cannot be documented in the tcg,tpm_tis-spi.yaml and
tcg,tpm-tis-i2c.yaml schemas: The validator would select both of them
and complain about SPI properties when the chip is an I²C peripheral.
So document the chip in a schema of its own which includes both, SPI and
I²C properties by reference.
Signed-off-by: Lukas Wunner <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/52635205818ab201cacb0c0f37c7fa48149c7f8e.1702806810.git.lukas@wunner.de
Signed-off-by: Rob Herring <[email protected]>
|
|
A significant number of Trusted Platform Modules conform to the "TIS"
specification published by the Trusted Computing Group ("TCG PC Client
Specific TPM Interface Specification"). These chips typically use an
SPI, I²C or LPC bus as transport (via MMIO in the latter case). Some
of them even support multiple of those buses (selectable through a
config strap) or the same chip is available in multiple SKUs, each with
a different bus interface.
The devicetree bindings for these TPMs have not been converted to DT
schema yet and are spread out across 3 generic files and 2 chip-specific
files. A few TPM compatible strings were added to trivial-devices.yaml
even though additional properties are documented in the plaintext
bindings.
Consolidate the devicetree bindings into 3 yaml files, one per bus.
Move common properties to a separate tpm-common.yaml.
Document compatible strings which are supported by the TPM TIS driver
but were neglected to be added to the devicetree bindings.
Document the memory-region property recently introduced by commit
1e2714bb83fc ("tpm: Add reserved memory event log").
Signed-off-by: Lukas Wunner <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/953fd4c7519030db88e5b5e12ab6307414ebdd21.1702806810.git.lukas@wunner.de
Signed-off-by: Rob Herring <[email protected]>
|
|
The integration for this SoC is different from the currently existing: It
needs it's PHY's reference clock rate to calculate the DDC bus frequency
correctly. The controller is also part of a powerdomain, so this gets added
as an mandatory property for this variant.
Signed-off-by: Alex Bee <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Remote ETM(Embedded Trace Macrocell) is to capture information of
the executed processor instructions of remote processors like modem.
Add new coresight-remote-etm.yaml file describing the bindings
required to define coresight remote etm in the device trees.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Mao Jinlong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
The correct property name is 'reg' not 'regs'.
Fixes: ae5c0585dfc2 ("dt-bindings: mmc: Convert sdhci-pxa to json-schema")
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
The iommus and iommu-names property schemas have several issues. First,
'iommus-names' in the if/then schemas is the wrong name. As all the names
are the same, they can be defined at the top level instead. Then the
if/then schemas just need to define how many entries. The iommus if/then
schemas are also redundant. Best I can tell, the desire was to require 2
entries for "samsung,exynos5433-mfc", "samsung,mfc-v5", "samsung,mfc-v6",
and "samsung,mfc-v8".
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Aakarsh Jain <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Add documentation for "synaptics,r63353" panel.
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Dario Binacchi <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Merge Qualcomm-specific idle-state binding with generic one.
Signed-off-by: David Heidelberg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
Merge in late fixes to prepare for the 6.8 net-next PR
No conflicts.
Signed-off-by: Paolo Abeni <[email protected]>
|
|
GCC 13.2.0 reported the warning of the print format specifier:
conf.c: In function ‘sysfs_get’:
conf.c:181:72: warning: format ‘%s’ expects argument of type ‘char *’, \
but argument 3 has type ‘int’ [-Wformat=]
181 | ksft_exit_fail_msg("sysfs: unable to read value '%s': %s\n",
| ~^
| |
| char *
| %d
The fix passes strerror(errno) as it was intended, like in the sibling error
exit message.
Fixes: aba51cd0949ae ("selftests: alsa - add PCM test")
Cc: Mark Brown <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Mirsad Todorovac <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
GCC 13.2.0 compiler issued the following warning:
mixer-test.c:350:80: warning: format ‘%ld’ expects argument of type ‘long int’, \
but argument 5 has type ‘unsigned int’ [-Wformat=]
350 | ksft_print_msg("%s.%d value %ld more than item count %ld\n",
| ~~^
| |
| long int
| %d
351 | ctl->name, index, int_val,
352 | snd_ctl_elem_info_get_items(ctl->info));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| unsigned int
Fixing the format specifier in call to ksft_print_msg() according to the
compiler suggestion silences the warning.
Fixes: 10f2f194663af ("kselftest: alsa: Validate values read from enumerations")
Cc: Mark Brown <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Mirsad Todorovac <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The GCC 13.2.0 compiler issued the following warning:
mixer-test.c: In function ‘ctl_value_index_valid’:
mixer-test.c:322:79: warning: format ‘%lld’ expects argument of type ‘long long int’, \
but argument 5 has type ‘long int’ [-Wformat=]
322 | ksft_print_msg("%s.%d value %lld more than maximum %lld\n",
| ~~~^
| |
| long long int
| %ld
323 | ctl->name, index, int64_val,
324 | snd_ctl_elem_info_get_max(ctl->info));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| long int
Fixing the format specifier as advised by the compiler suggestion removes the
warning.
Fixes: 3f48b137d88e7 ("kselftest: alsa: Factor out check that values meet constraints")
Cc: Mark Brown <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Mirsad Todorovac <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
ksft_exit_fail_msg()
Minor fix in the number of arguments to error reporting function in the
test program as reported by GCC 13.2.0 warning.
mixer-test.c: In function ‘find_controls’:
mixer-test.c:169:44: warning: too many arguments for format [-Wformat-extra-args]
169 | ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The number of arguments in call to ksft_exit_fail_msg() doesn't correspond
to the format specifiers, so this is adjusted resembling the sibling calls
to the error function.
Fixes: b1446bda56456 ("kselftest: alsa: Check for event generation when we write to controls")
Cc: Mark Brown <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Mirsad Todorovac <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Sparse reports an endian mismatch.
The amplifier expects the calibration data as big-endian.
Use the __be32 type to express endianness better.
Fixes: c3ca4458cc2f ("ALSA: hda/tas2781: add TAS2563 support for 14ARB7")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Gergo Koteles <[email protected]>
Link: https://lore.kernel.org/r/3852ff28ea7d5d8f2086d8dd78aeff8d1d984991.1704748435.git.soyer@irl.hu
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Fix kernel-doc notation to prevent a warning:
tpm_tis_i2c_cr50.c:681: warning: Excess function parameter 'id' description in 'tpm_cr50_i2c_probe'
and fix a spelling error reported by codespell.
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Peter Huewe <[email protected]>
Cc: Jarkko Sakkinen <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: [email protected]
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
Use preferred i2c_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
The STM32 systems have a mailbox used for communication with non-Linux
processors like the M4 on the STM32MP157A. Enable the driver for the
mailbox so it is available for testing.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The select was lost by accident during the multiplatform conversion.
Any davinci-only
arm-linux-gnueabi-ld: arch/arm/mach-davinci/sleep.o: in function `CACHE_FLUSH':
(.text+0x168): undefined reference to `arm926_flush_kern_cache_all'
Fixes: f962396ce292 ("ARM: davinci: support multiplatform build for ARM v5")
Acked-by: Bartosz Golaszewski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
On ARM64 platforms, id->data is a 64-bit value and casting it to a
32-bit integer causes build errors. Cast it to uintptr_t instead.
The id->driver_data cast is unnecessary, so drop it.
Signed-off-by: Duje Mihanović <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Return statement was not needed at end of cifs_chan_update_iface
Suggested-by: Christophe Jaillet <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
The return values for cifs_chan_update_iface() didn't match what the
documentation said and nothing was checking them anyway. Just make it
a void function.
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Yafang Shao added task_get_cgroup1() helper to enable a similar BPF
helper so that BPF progs can be more useful on cgroup1 hierarchies.
While cgroup1 is mostly in maintenance mode, this addition is very
small while having an outsized usefulness for users who are still on
cgroup1. Yafang also optimized root cgroup list access by making it
RCU protected in the process.
- Waiman Long optimized rstat operation leading to substantially lower
and more consistent lock hold time while flushing the hierarchical
statistics. As the lock can be acquired briefly in various hot paths,
this reduction has cascading benefits.
- Waiman also improved the quality of isolation for cpuset's isolated
partitions. CPUs which are allocated to isolated partitions are now
excluded from running unbound work items and cpu_is_isolated() test
which is used by vmstat and memcg to reduce interference now includes
cpuset isolated CPUs. While it isn't there yet, the hope is
eventually reaching parity with the isolation level provided by the
`isolcpus` boot param but in a dynamic manner.
* tag 'cgroup-for-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Move rcu_head up near the top of cgroup_root
cgroup/cpuset: Include isolated cpuset CPUs in cpu_is_isolated() check
cgroup: Avoid false cacheline sharing of read mostly rstat_cpu
cgroup/rstat: Optimize cgroup_rstat_updated_list()
cgroup: Fix documentation for cpu.idle
cgroup/cpuset: Expose cpuset.cpus.isolated
workqueue: Move workqueue_set_unbound_cpumask() and its helpers inside CONFIG_SYSFS
cgroup/rstat: Reduce cpu_lock hold time in cgroup_rstat_flush_locked()
cgroup/cpuset: Take isolated CPUs out of workqueue unbound cpumask
cgroup/cpuset: Keep track of CPUs in isolated partitions
selftests/cgroup: Minor code cleanup and reorganization of test_cpuset_prs.sh
workqueue: Add workqueue_unbound_exclude_cpumask() to exclude CPUs from wq_unbound_cpumask
selftests: cgroup: Fixes a typo in a comment
cgroup: Add a new helper for cgroup1 hierarchy
cgroup: Add annotation for holding namespace_sem in current_cgns_cgroup_from_root()
cgroup: Eliminate the need for cgroup_mutex in proc_cgroup_show()
cgroup: Make operations on the cgroup root_list RCU safe
cgroup: Remove unnecessary list_empty()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Energy scheduling:
- Consolidate how the max compute capacity is used in the scheduler
and how we calculate the frequency for a level of utilization.
- Rework interface between the scheduler and the schedutil governor
- Simplify the util_est logic
Deadline scheduler:
- Work more towards reducing SCHED_DEADLINE starvation of low
priority tasks (e.g., SCHED_OTHER) tasks when higher priority tasks
monopolize CPU cycles, via the introduction of 'deadline servers'
(nested/2-level scheduling).
"Fair servers" to make use of this facility are not introduced yet.
EEVDF:
- Introduce O(1) fastpath for EEVDF task selection
NUMA balancing:
- Tune the NUMA-balancing vma scanning logic some more, to better
distribute the probability of a particular vma getting scanned.
Plus misc fixes, cleanups and updates"
* tag 'sched-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
sched/fair: Fix tg->load when offlining a CPU
sched/fair: Remove unused 'next_buddy_marked' local variable in check_preempt_wakeup_fair()
sched/fair: Use all little CPUs for CPU-bound workloads
sched/fair: Simplify util_est
sched/fair: Remove SCHED_FEAT(UTIL_EST_FASTUP, true)
arm64/amu: Use capacity_ref_freq() to set AMU ratio
cpufreq/cppc: Set the frequency used for computing the capacity
cpufreq/cppc: Move and rename cppc_cpufreq_{perf_to_khz|khz_to_perf}()
energy_model: Use a fixed reference frequency
cpufreq/schedutil: Use a fixed reference frequency
cpufreq: Use the fixed and coherent frequency for scaling capacity
sched/topology: Add a new arch_scale_freq_ref() method
freezer,sched: Clean saved_state when restoring it during thaw
sched/fair: Update min_vruntime for reweight_entity() correctly
sched/doc: Update documentation after renames and synchronize Chinese version
sched/cpufreq: Rework iowait boost
sched/cpufreq: Rework schedutil governor performance estimation
sched/pelt: Avoid underestimation of task utilization
sched/timers: Explain why idle task schedules out on remote timer enqueue
sched/cpuidle: Comment about timers requirements VS idle handler
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
- Add branch stack counters ABI extension to better capture the growing
amount of information the PMU exposes via branch stack sampling.
There's matching tooling support.
- Fix race when creating the nr_addr_filters sysfs file
- Add Intel Sierra Forest and Grand Ridge intel/cstate PMU support
- Add Intel Granite Rapids, Sierra Forest and Grand Ridge uncore PMU
support
- Misc cleanups & fixes
* tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Factor out topology_gidnid_map()
perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology()
perf/x86/amd: Reject branch stack for IBS events
perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge
perf/x86/intel/uncore: Support IIO free-running counters on GNR
perf/x86/intel/uncore: Support Granite Rapids
perf/x86/uncore: Use u64 to replace unsigned for the uncore offsets array
perf/x86/intel/uncore: Generic uncore_get_uncores and MMIO format of SPR
perf: Fix the nr_addr_filters fix
perf/x86/intel/cstate: Add Grand Ridge support
perf/x86/intel/cstate: Add Sierra Forest support
x86/smp: Export symbol cpu_clustergroup_mask()
perf/x86/intel/cstate: Cleanup duplicate attr_groups
perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file
perf/x86/intel: Support branch counters logging
perf/x86/intel: Reorganize attrs and is_visible
perf: Add branch_sample_call_stack
perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag
perf: Add branch stack counters
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq subsystem updates from Ingo Molnar:
- Add support for the IA55 interrupt controller on RZ/G3S SoC's
- Update/fix the Qualcom MPM Interrupt Controller driver's register
enumeration within the somewhat exotic "RPM Message RAM" MMIO-mapped
shared memory region that is used for other purposes as well
- Clean up the Xtensa built-in Programmable Interrupt Controller driver
(xtensa-pic) a bit
* tag 'irq-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-xtensa-pic: Clean up
irqchip/qcom-mpm: Support passing a slice of SRAM as reg space
dt-bindings: interrupt-controller: mpm: Pass MSG RAM slice through phandle
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G3S
irqchip/renesas-rzg2l: Add support for suspend to RAM
irqchip/renesas-rzg2l: Add macro to retrieve TITSR register offset based on register's index
irqchip/renesas-rzg2l: Implement restriction when writing ISCR register
irqchip/renesas-rzg2l: Document structure members
irqchip/renesas-rzg2l: Align struct member names to tabs
irqchip/renesas-rzg2l: Use tabs instead of spaces
|
|
eee_active is set by phy_ethtool_get_eee() already, using the same
logic plus an additional check against link speed/duplex values.
See genphy_c45_eee_is_active() for details.
So we can remove this line.
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
eee_active is set by phy_ethtool_get_eee() already, using the same
logic plus an additional check against link speed/duplex values.
See genphy_c45_eee_is_active() for details.
So we can remove this line.
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Michael Chan says:
====================
bnxt_en: ntuple filter fixes
The first patch is to remove an unneeded variable. The next 2 patches
are to release RCU lock correctly after accesing the RCU protected
filter structure. Patch 2 also re-arranges the code to look cleaner.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Similar to the previous patch, RCU locking was released too early
in bnxt_rx_flow_steer(). Fix it to unlock after reading fltr->base.sw_id
to guarantee that fltr won't be freed while we are still reading it.
Fixes: cb5bdd292dc0 ("bnxt_en: Add bnxt_lookup_ntp_filter_from_idx() function")
Reported-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Michael Chan <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
After looking up an ntuple filter from a RCU hash list, the
rcu_read_unlock() call should be made after reading the structure,
or after determining that the filter cannot age out (by aRFS).
The existing code was calling rcu_read_unlock() too early in
bnxt_srxclsrldel().
As suggested by Simon Horman, change the code to handle the error
case of fltr_base not found in the if condition. The code looks
cleaner this way.
Fixes: 8d7ba028aa9a ("bnxt_en: Add support for ntuple filter deletion by ethtool.")
Suggested-by: Simon Horman <[email protected]>
Reported-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Michael Chan <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
After recent refactoring, this function doesn't return error any
more. Remove the unneeded rc variable and change the function to
void. The caller is not checking for the return value.
Fixes: 96c9bedc755e ("bnxt_en: Refactor L2 filter alloc/free firmware commands.")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Michael Chan <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|