aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-09-18arm64: efi: Don't include EFI fpsimd save/restore code in non-EFI kernelsDave Martin1-0/+4
__efi_fpsimd_begin()/__efi_fpsimd_end() are for use when making EFI calls only, so using them in non-EFI kernels is not allowed. This patch compiles them out if CONFIG_EFI is not set. Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Dave Martin <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2017-09-18mtd: nand: lpc32xx_mlc: Fix an error handling path in lpc32xx_nand_probe()Christophe JAILLET1-1/+2
If 'clk_prepare_enable()' fails, we must 'put' the corresponding clock. Fixes: 4d26f012ab59 ("mtd: nand: lpc32xx_mlc: Handle return value of clk_prepare_enable.") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Boris Brezillon <[email protected]>
2017-09-18usb: Increase quirk delay for USB devicesDmitry Fleytman2-2/+2
Commit e0429362ab15 ("usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e") introduced quirk to workaround an issue with some Logitech webcams. The workaround is introducing delay for some USB operations. According to our testing, delay introduced by original commit is not long enough and in rare cases we still see issues described by the aforementioned commit. This patch increases delays introduced by original commit. Having this patch applied we do not see those problems anymore. Signed-off-by: Dmitry Fleytman <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-09-18uwb: properly check kthread_run return valueAndrey Konovalov1-4/+8
uwbd_start() calls kthread_run() and checks that the return value is not NULL. But the return value is not NULL in case kthread_run() fails, it takes the form of ERR_PTR(-EINTR). Use IS_ERR() instead. Also add a check to uwbd_stop(). Signed-off-by: Andrey Konovalov <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-09-18uwb: ensure that endpoint is interruptAndrey Konovalov1-0/+2
hwarc_neep_init() assumes that endpoint 0 is interrupt, but there's no check for that, which results in a WARNING in USB core code, when a bad USB descriptor is provided from a device: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 3 at drivers/usb/core/urb.c:449 usb_submit_urb+0xf8a/0x11d0 Modules linked in: CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.13.0+ #111 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event task: ffff88006bdc1a00 task.stack: ffff88006bde8000 RIP: 0010:usb_submit_urb+0xf8a/0x11d0 drivers/usb/core/urb.c:448 RSP: 0018:ffff88006bdee3c0 EFLAGS: 00010282 RAX: 0000000000000029 RBX: ffff8800672a7200 RCX: 0000000000000000 RDX: 0000000000000029 RSI: ffff88006c815c78 RDI: ffffed000d7bdc6a RBP: ffff88006bdee4c0 R08: fffffbfff0fe00ff R09: fffffbfff0fe00ff R10: 0000000000000018 R11: fffffbfff0fe00fe R12: 1ffff1000d7bdc7f R13: 0000000000000003 R14: 0000000000000001 R15: ffff88006b02cc90 FS: 0000000000000000(0000) GS:ffff88006c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe4daddf000 CR3: 000000006add6000 CR4: 00000000000006f0 Call Trace: hwarc_neep_init+0x4ce/0x9c0 drivers/uwb/hwa-rc.c:710 uwb_rc_add+0x2fb/0x730 drivers/uwb/lc-rc.c:361 hwarc_probe+0x34e/0x9b0 drivers/uwb/hwa-rc.c:858 usb_probe_interface+0x351/0x8d0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:385 driver_probe_device+0x610/0xa00 drivers/base/dd.c:529 __device_attach_driver+0x230/0x290 drivers/base/dd.c:625 bus_for_each_drv+0x15e/0x210 drivers/base/bus.c:463 __device_attach+0x269/0x3c0 drivers/base/dd.c:682 device_initial_probe+0x1f/0x30 drivers/base/dd.c:729 bus_probe_device+0x1da/0x280 drivers/base/bus.c:523 device_add+0xcf9/0x1640 drivers/base/core.c:1703 usb_set_configuration+0x1064/0x1890 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:385 driver_probe_device+0x610/0xa00 drivers/base/dd.c:529 __device_attach_driver+0x230/0x290 drivers/base/dd.c:625 bus_for_each_drv+0x15e/0x210 drivers/base/bus.c:463 __device_attach+0x269/0x3c0 drivers/base/dd.c:682 device_initial_probe+0x1f/0x30 drivers/base/dd.c:729 bus_probe_device+0x1da/0x280 drivers/base/bus.c:523 device_add+0xcf9/0x1640 drivers/base/core.c:1703 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4890 hub_port_connect_change drivers/usb/core/hub.c:4996 port_event drivers/usb/core/hub.c:5102 hub_event+0x23c8/0x37c0 drivers/usb/core/hub.c:5182 process_one_work+0x9fb/0x1570 kernel/workqueue.c:2097 worker_thread+0x1e4/0x1350 kernel/workqueue.c:2231 kthread+0x324/0x3f0 kernel/kthread.c:231 ret_from_fork+0x25/0x30 arch/x86/entry/entry_64.S:425 Code: 48 8b 85 30 ff ff ff 48 8d b8 98 00 00 00 e8 8e 93 07 ff 45 89 e8 44 89 f1 4c 89 fa 48 89 c6 48 c7 c7 a0 e5 55 86 e8 20 08 8f fd <0f> ff e9 9b f7 ff ff e8 4a 04 d6 fd e9 80 f7 ff ff e8 60 11 a6 ---[ end trace 55d741234124cfc3 ]--- Check that endpoint is interrupt. Found by syzkaller. Signed-off-by: Andrey Konovalov <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-09-18ARC: reset: add missing DT binding documentation for HSDKv1 reset driverEugeniy Paltsev1-0/+28
When applying the original patch [1], the DT binding docs were lost. This patch adds them back. [1] https://patchwork.kernel.org/patch/9852997/ Fixes: e0be864f1424 ("ARC: reset: introduce HSDKv1 reset driver") Signed-off-by: Eugeniy Paltsev <[email protected]> Signed-off-by: Philipp Zabel <[email protected]>
2017-09-18ARC: reset: Only build on archs that have IOMEMThomas Meyer1-0/+1
This avoids the error: drivers/reset/reset-hsdk-v1.o: In function `hsdkv1_reset_probe': /home/thomas/git/linux/drivers/reset/reset-hsdk-v1.c:101: undefined reference to `devm_ioremap_resource' collect2: error: ld returned 1 exit status Signed-off-by: Thomas Meyer <[email protected]> Signed-off-by: Philipp Zabel <[email protected]>
2017-09-18USB: serial: option: add support for TP-Link LTE moduleHenryk Heisig1-0/+2
This commit adds support for TP-Link LTE mPCIe module is used in in TP-Link MR200v1, MR6400v1 and v2 routers. Signed-off-by: Henryk Heisig <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2017-09-18USB: serial: ftdi_sio: add id for Cypress WICED dev boardJeffrey Chu2-0/+9
Add CYPRESS_VID vid and CYPRESS_WICED_BT_USB and CYPRESS_WICED_WL_USB device IDs to ftdi_sio driver. Signed-off-by: Jeffrey Chu <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2017-09-18ARM: at91: Replace uses of virt_to_phys with __pa_symbolAlexandre Belloni1-2/+2
The PM code wrongly uses virt_to_phys() instead of __pa_symbol() and was not updated by commit 64fc2a947a98 ("ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol") because it was not yet in tree. Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: Nicolas Ferre <[email protected]>
2017-09-18ARM: dts: at91: sama5d27_som1_ek: fix USB host vbusNicolas Ferre1-1/+4
The USB host has 3 ports so we must specify the entries for each in the atmel,vbus-gpio property. The specified pin (PA27) is the vbus for USBB and not USBA. Signed-off-by: Nicolas Ferre <[email protected]> [[email protected]: change subject to match the desired prefix] Signed-off-by: Claudiu Beznea <[email protected]>
2017-09-18ARM: dts: at91: sama5d27_som1_ek: fix typosLudovic Desroches1-2/+2
Fix typos that prevent proper using of uart2 and uart4 devices. Signed-off-by: Ludovic Desroches <[email protected]> Signed-off-by: Claudiu Beznea <[email protected]> Signed-off-by: Nicolas Ferre <[email protected]>
2017-09-18ARM: dts: at91: sama5d27_som1_ek: update pinmux/pinconf for LEDs and USBLudovic Desroches1-6/+6
There are some changes from the prototype board concerning LEDs and USB pins: - USBB power enable and red LED pins are inverted. - The polarity of LEDs is inverted too. Signed-off-by: Ludovic Desroches <[email protected]> Signed-off-by: Claudiu Beznea <[email protected]> Signed-off-by: Nicolas Ferre <[email protected]>
2017-09-18mtd: spi-nor: fix DMA unsafe buffer issue in spi_nor_read_sfdp()Cyrille Pitchen1-3/+33
spi_nor_read_sfdp() calls nor->read() to read the SFDP data. When the m25p80 driver is used (pretty common case), nor->read() is then implemented by the m25p80_read() function, which is likely to initialize a 'struct spi_transfer' from its buf argument before appending this structure inside the 'struct spi_message' argument of spi_sync(). Besides the SPI sub-system states that both .tx_buf and .rx_buf members of 'struct spi_transfer' must point into dma-safe memory. However, two of the three calls of spi_nor_read_sfdp() were given pointers to stack allocated memory as buf argument, hence not in a dma-safe area. Hopefully, the third and last call of spi_nor_read_sfdp() was already given a kmalloc'ed buffer argument, hence dma-safe. So this patch fixes this issue by introducing a spi_nor_read_sfdp_dma_unsafe() function which simply wraps the existing spi_nor_read_sfdp() function and uses some kmalloc'ed memory as a bounce buffer. Fixes: f384b352cbf0 ("mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables") Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Cyrille Pitchen <[email protected]> Signed-off-by: Boris Brezillon <[email protected]>
2017-09-18mtd: spi-nor: Check consistency of the memory size extracted from the SFDPBoris Brezillon1-0/+9
One field of the flash parameter table contains information about the flash device size. Most of the time the data extracted from this field is valid, but sometimes the BFPT section of the SFDP table is corrupted or invalid and this field is set to 0xffffffff, thus resulting in an integer overflow when setting params->size. Since NOR devices are anayway always smaller than 2^64 bytes, we can easily stop the BFPT parsing if the size reported in this table is invalid. Fixes: f384b352cbf0 ("mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables") Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Boris Brezillon <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Acked-by: Cyrille Pitchen <[email protected]>
2017-09-18clocksource/integrator: Fix section mismatch warningArnd Bergmann1-2/+2
gcc-4.6 and older fail to inline integrator_clocksource_init, so they end up showing a harmless warning: WARNING: vmlinux.o(.text+0x4aa94c): Section mismatch in reference from the function integrator_clocksource_init() to the function .init.text:clocksource_mmio_init() The function integrator_clocksource_init() references the function __init clocksource_mmio_init(). This is often because integrator_clocksource_init lacks a __init annotation or the annotation of clocksource_mmio_init is wrong. Add the missing __init annotation that makes it build cleanly with all compilers. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Daniel Lezcano <[email protected]> Link: http://lkml.kernel.org/r/[email protected]
2017-09-18Merge tag 'drm-amdkfd-next-2017-09-02' of ↵Dave Airlie3-88/+87
git://people.freedesktop.org/~gabbayo/linux into drm-fixes some trivial amdkfd cleanups * tag 'drm-amdkfd-next-2017-09-02' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: pass queue's mqd when destroying mqd drm/amdkfd: remove memset before memcpy uapi linux/kfd_ioctl.h: only use __u32 and __u64
2017-09-17Update version of cifs moduleSteve French1-1/+1
Signed-off-by: Steve French <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2017-09-17cifs: hide unused functionsArnd Bergmann1-0/+2
The newly added SMB2+ attribute support causes unused function warnings when CONFIG_CIFS_XATTR is disabled: fs/cifs/smb2ops.c:563:1: error: 'smb2_set_ea' defined but not used [-Werror=unused-function] smb2_set_ea(const unsigned int xid, struct cifs_tcon *tcon, fs/cifs/smb2ops.c:513:1: error: 'smb2_query_eas' defined but not used [-Werror=unused-function] smb2_query_eas(const unsigned int xid, struct cifs_tcon *tcon, This adds another #ifdef around the affected functions. Fixes: 5517554e4313 ("cifs: Add support for writing attributes on SMB2+") Fixes: 95907fea4fd8 ("cifs: Add support for reading attributes on SMB2+") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Steve French <[email protected]>
2017-09-17SMB3: Add support for multidialect negotiate (SMB2.1 and later)Steve French5-18/+139
With the need to discourage use of less secure dialect, SMB1 (CIFS), we temporarily upgraded the dialect to SMB3 in 4.13, but since there are various servers which only support SMB2.1 (2.1 is more secure than CIFS/SMB1) but not optimal for a default dialect - add support for multidialect negotiation. cifs.ko will now request SMB2.1 or later (ie SMB2.1 or SMB3.0, SMB3.02) and the server will pick the latest most secure one it can support. In addition since we are sending multidialect negotiate, add support for secure negotiate to validate that a man in the middle didn't downgrade us. Signed-off-by: Steve French <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]> CC: Stable <[email protected]> # 4.13+
2017-09-17arm64/syscalls: Move address limit check in loopThomas Garnier1-3/+3
A bug was reported on ARM where set_fs might be called after it was checked on the work pending function. ARM64 is not affected by this bug but has a similar construct. In order to avoid any similar problems in the future, the addr_limit_user_check function is moved at the beginning of the loop. Fixes: cf7de27ab351 ("arm64/syscalls: Check address limit on user-mode return") Reported-by: Leonard Crestez <[email protected]> Signed-off-by: Thomas Garnier <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: Dave Martin <[email protected]> Cc: Will Drewry <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Russell King <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: David Howells <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Al Viro <[email protected]> Cc: [email protected] Cc: Yonghong Song <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected]
2017-09-17arm/syscalls: Optimize address limit checkThomas Garnier2-0/+18
Disable the generic address limit check in favor of an architecture specific optimized implementation. The generic implementation using pending work flags did not work well with ARM and alignment faults. The address limit is checked on each syscall return path to user-mode path as well as the irq user-mode return function. If the address limit was changed, a function is called to report data corruption (stopping the kernel or process based on configuration). The address limit check has to be done before any pending work because they can reset the address limit and the process is killed using a SIGKILL signal. For example the lkdtm address limit check does not work because the signal to kill the process will reset the user-mode address limit. Signed-off-by: Thomas Garnier <[email protected]> Signed-off-by: Kees Cook <[email protected]> Tested-by: Kees Cook <[email protected]> Tested-by: Leonard Crestez <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: Dave Martin <[email protected]> Cc: Will Drewry <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Russell King <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: David Howells <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Al Viro <[email protected]> Cc: [email protected] Cc: Yonghong Song <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected]
2017-09-17Revert "arm/syscalls: Check address limit on user-mode return"Thomas Garnier4-23/+8
This reverts commit 73ac5d6a2b6ac3ae8d1e1818f3e9946f97489bc9. The work pending loop can call set_fs after addr_limit_user_check removed the _TIF_FSCHECK flag. This may happen at anytime based on how ARM handles alignment exceptions. It leads to an infinite loop condition. After discussion, it has been agreed that the generic approach is not tailored to the ARM architecture and any fix might not be complete. This patch will be replaced by an architecture specific implementation. The work flag approach will be kept for other architectures. Reported-by: Leonard Crestez <[email protected]> Signed-off-by: Thomas Garnier <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: Dave Martin <[email protected]> Cc: Will Drewry <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Russell King <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: David Howells <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Al Viro <[email protected]> Cc: [email protected] Cc: Yonghong Song <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected]
2017-09-17syscalls: Use CHECK_DATA_CORRUPTION for addr_limit_user_checkThomas Garnier1-4/+8
Use CHECK_DATA_CORRUPTION instead of BUG_ON to provide more flexibility on address limit failures. By default, send a SIGKILL signal to kill the current process preventing exploitation of a bad address limit. Make the TIF_FSCHECK flag optional so ARM can use this function. Signed-off-by: Thomas Garnier <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Pratyush Anand <[email protected]> Cc: Dave Martin <[email protected]> Cc: Will Drewry <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Russell King <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: David Howells <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Al Viro <[email protected]> Cc: [email protected] Cc: Yonghong Song <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected]
2017-09-17x86/mm/32: Load a sane CR3 before cpu_init() on secondary CPUsAndy Lutomirski1-6/+7
For unknown historical reasons (i.e. Borislav doesn't recall), 32-bit kernels invoke cpu_init() on secondary CPUs with initial_page_table loaded into CR3. Then they set current->active_mm to &init_mm and call enter_lazy_tlb() before fixing CR3. This means that the x86 TLB code gets invoked while CR3 is inconsistent, and, with the improved PCID sanity checks I added, we warn. Fix it by loading swapper_pg_dir (i.e. init_mm.pgd) earlier. Reported-by: Paul Menzel <[email protected]> Reported-by: Pavel Machek <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Fixes: 72c0098d92ce ("x86/mm: Reinitialize TLB state on hotplug and resume") Link: http://lkml.kernel.org/r/30cdfea504682ba3b9012e77717800a91c22097f.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2017-09-17x86/mm/32: Move setup_clear_cpu_cap(X86_FEATURE_PCID) earlierAndy Lutomirski2-8/+8
Otherwise we might have the PCID feature bit set during cpu_init(). This is just for robustness. I haven't seen any actual bugs here. Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Fixes: cba4671af755 ("x86/mm: Disable PCID on 32-bit kernels") Link: http://lkml.kernel.org/r/b16dae9d6b0db5d9801ddbebbfd83384097c61f3.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2017-09-17x86/mm/64: Stop using CR3.PCID == 0 in ASID-aware codeAndy Lutomirski1-2/+19
Putting the logical ASID into CR3's PCID bits directly means that we have two cases to consider separately: ASID == 0 and ASID != 0. This means that bugs that only hit in one of these cases trigger nondeterministically. There were some bugs like this in the past, and I think there's still one in current kernels. In particular, we have a number of ASID-unware code paths that save CR3, write some special value, and then restore CR3. This includes suspend/resume, hibernate, kexec, EFI, and maybe other things I've missed. This is currently dangerous: if ASID != 0, then this code sequence will leave garbage in the TLB tagged for ASID 0. We could potentially see corruption when switching back to ASID 0. In principle, an initialize_tlbstate_and_flush() call after these sequences would solve the problem, but EFI, at least, does not call this. (And it probably shouldn't -- initialize_tlbstate_and_flush() is rather expensive.) Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/cdc14bbe5d3c3ef2a562be09a6368ffe9bd947a6.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2017-09-17x86/mm: Factor out CR3-building codeAndy Lutomirski2-10/+16
Current, the code that assembles a value to load into CR3 is open-coded everywhere. Factor it out into helpers build_cr3() and build_cr3_noflush(). This makes one semantic change: __get_current_cr3_fast() was wrong on SME systems. No one noticed because the only caller is in the VMX code, and there are no CPUs with both SME and VMX. Signed-off-by: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tom Lendacky <[email protected]> Link: http://lkml.kernel.org/r/ce350cf11e93e2842d14d0b95b0199c7d881f527.1505663533.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2017-09-17CIFS/SMB3: Update documentation to reflect SMB3 and various changesSteve French4-91/+91
Signed-off-by: Steve French <[email protected]> Reviewed-by: Aurelien Aptel <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2017-09-17dma-coherent: fix rmem_dma_device_init regressionArnd Bergmann1-10/+9
My recent bug fix introduced another bug, which caused rmem_dma_device_init to always fail, as rmem->priv is never set to anything. This restores the previous behavior, calling dma_init_coherent_memory() whenever ->priv is NULL. Fixes: d35b0996fef3 ("dma-coherent: fix dma_declare_coherent_memory() logic error") Reported-by: Roy Pledge <[email protected]> Tested-by: Roy Pledge <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2017-09-17Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds2-13/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc fixes from Thomas Gleixner: - A fix for a user space regression in /proc/$PID/stat - A couple of objtool fixes: ~ Plug a memory leak ~ Avoid accessing empty sections which upsets certain binutil versions ~ Prevent corrupting the obj file when section sizes did not change * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fs/proc: Report eip/esp in /prod/PID/stat for coredumping objtool: Fix object file corruption objtool: Do not retrieve data from empty sections objtool: Fix memory leak in elf_create_rela_section()
2017-09-17Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "Fix for an off by one error in a cpumask result comparison" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix cpumask check in __irq_startup_managed()
2017-09-17Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix addressing the missing CP8 feature bit in CPUID for a range of AMD ZEN models/mask revisions" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/AMD: Fix erratum 1076 (CPB bit)
2017-09-17clk: rockchip: add sclk_timer5 as critical clock on rk3128Elaine Zhang1-0/+1
sclk_timer5 is for arm arch counter, so need always on. but no dts node to handle this clk, so make it as critical clock Signed-off-by: Elaine Zhang <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]>
2017-09-17clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs errorElaine Zhang1-4/+4
A copy-paste error made them use the wrong bits in the register. Signed-off-by: Elaine Zhang <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]>
2017-09-17clk: rockchip: add pclk_pmu as critical clock on rk3128Elaine Zhang1-1/+2
pclk_pmu need always on, and no dts node to handle this clk, so make it as critical clock Signed-off-by: Elaine Zhang <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]>
2017-09-17Revert "arm64: dts: rockchip: Add basic cpu frequencies for RK3368"Heiko Stuebner1-70/+2
This reverts commit 6f2dea1f5fdb73eb2e050d9ebe990121d557e519. Without accurate cpu regulators being set for boards this will wreak havoc when cpufreq-dt begins to set new frequencies without adjusting the core frequency. Additionally the rk3368 has an unsolved issue in that it has two separate cpu clusters with separate clock lines but only one cpu supply regulator for both clusters, which causes even more problems. While it seems that originally only one cluster was supposed to be active at a time (big or little), talking with real users of the hardware revealed that having all 8 cores accessible at 1.2GHz max is way more liked than having 4 cores at 1.5GHz max. Such an approach needs changes to cpufreq and/or opp though to control the two separate clock lines when setting both clusters to the same frequencies. In any case, having the OPPs in the dts at this point in time is undesireable, so remove them again for now. Signed-off-by: Heiko Stuebner <[email protected]>
2017-09-16Linux 4.14-rc1Linus Torvalds1-2/+2
2017-09-16Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds4-16/+16
Pull UBI updates from Richard Weinberger: "Minor improvements" * tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs: UBI: Fix two typos in comments ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate" ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines ubi: pr_err() strings should end with newlines
2017-09-16Merge branch 'for-linus-4.14-rc1' of ↵Linus Torvalds14-27/+41
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - minor improvements - fixes for Debian's new gcc defaults (pie enabled by default) - fixes for XSTATE/XSAVE to make UML work again on modern systems * 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: return negative in tuntap_open_tramp() um: remove a stray tab um: Use relative modversions with LD_SCRIPT_DYN um: link vmlinux with -no-pie um: Fix CONFIG_GCOV for modules. Fix minor typos and grammar in UML start_up help um: defconfig: Cleanup from old Kconfig options um: Fix FP register size for XSTATE/XSAVE
2017-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds48-234/+467
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
2017-09-16Merge branch 'for-linus' of ↵Linus Torvalds12-11/+380
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "A second round of updates for the input subsystem: - a new driver for PWM-controlled vibrators - ucb1400 touchscreen driver had completely busted suspend/resume handling - we now handle "home" button found on some devices with Goodix touchscreens - assorted other fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add Gigabyte P57 to the keyboard reset table Input: xpad - validate USB endpoint type during probe Input: ucb1400_ts - fix suspend and resume handling Input: edt-ft5x06 - fix access to non-existing register Input: elantech - make arrays debounce_packet static, reduces object code size Input: surface3_spi - make const array header static, reduces object code size Input: goodix - add support for capacitive home button Input: add a driver for PWM controllable vibrators Input: adi - make array seq static, reduces object code size
2017-09-16genirq: Fix cpumask check in __irq_startup_managed()Thomas Gleixner1-1/+1
The result of cpumask_any_and() is invalid when result greater or equal nr_cpu_ids. The current check is checking for greater only. Fix it. Fixes: 761ea388e8c4 ("genirq: Handle managed irqs gracefully in irq_startup()") Signed-off-by: Thomas Gleixner <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Tony Luck <[email protected]> Cc: Chen Yu <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Alok Kataria <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: [email protected] Cc: Paolo Bonzini <[email protected]> Cc: Rui Zhang <[email protected]> Cc: "K. Y. Srinivasan" <[email protected]> Cc: Arjan van de Ven <[email protected]> Cc: Dan Williams <[email protected]> Cc: Len Brown <[email protected]> Link: http://lkml.kernel.org/r/[email protected]
2017-09-16firmware: Restore support for built-in firmwareMarkus Trippelsdorf4-5/+71
Commit 5620a0d1aac ("firmware: delete in-kernel firmware") removed the entire firmware directory. Unfortunately it thereby also removed the support for built-in firmware. This restores the ability to build firmware directly into the kernel by pruning the original Makefile to the necessary minimum. The default for EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/. Fixes: 5620a0d1aac ("firmware: delete in-kernel firmware") Signed-off-by: Markus Trippelsdorf <[email protected]> Acked-by: Greg K-H <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-09-16mlxsw: spectrum_router: Only handle IPv4 and IPv6 eventsIdo Schimmel1-1/+2
The driver doesn't support events from address families other than IPv4 and IPv6, so ignore them. Otherwise, we risk queueing a work item before it's initialized. This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES is enabled, as the VRF driver will try to add an l3mdev rule for the IPMR family. Fixes: 65e65ec137f4 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: Andreas Rammhold <[email protected]> Reported-by: Florian Klink <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-16Documentation: link in networking docsPavel Machek1-1/+1
Fix link in filter.txt. Acked-by: Pavel Machek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-16tcp: fix data delivery rateEric Dumazet1-4/+3
Now skb->mstamp_skb is updated later, we also need to call tcp_rate_skb_sent() after the update is done. Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-15Merge branch '4.14-features' of ↵Linus Torvalds205-3427/+6399
git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.14 for MIPS; below a summary of the non-merge commits: CM: - Rename mips_cm_base to mips_gcr_base - Specify register size when generating accessors - Use BIT/GENMASK for register fields, order & drop shifts - Add cluster & block args to mips_cm_lock_other() CPC: - Use common CPS accessor generation macros - Use BIT/GENMASK for register fields, order & drop shifts - Introduce register modify (set/clear/change) accessors - Use change_*, set_* & clear_* where appropriate - Add CM/CPC 3.5 register definitions - Use GlobalNumber macros rather than magic numbers - Have asm/mips-cps.h include CM & CPC headers - Cluster support for topology functions - Detect CPUs in secondary clusters CPS: - Read GIC_VL_IDENT directly, not via irqchip driver DMA: - Consolidate coherent and non-coherent dma_alloc code - Don't use dma_cache_sync to implement fd_cacheflush FPU emulation / FP assist code: - Another series of 14 commits fixing corner cases such as NaN propgagation and other special input values. - Zero bits 32-63 of the result for a CLASS.D instruction. - Enhanced statics via debugfs - Do not use bools for arithmetic. GCC 7.1 moans about this. - Correct user fault_addr type Generic MIPS: - Enhancement of stack backtraces - Cleanup from non-existing options - Handle non word sized instructions when examining frame - Fix detection and decoding of ADDIUSP instruction - Fix decoding of SWSP16 instruction - Refactor handling of stack pointer in get_frame_info - Remove unreachable code from force_fcr31_sig() - Convert to using %pOF instead of full_name - Remove the R6000 support. - Move FP code from *_switch.S to *_fpu.S - Remove unused ST_OFF from r2300_switch.S - Allow platform to specify multiple its.S files - Add #includes to various files to ensure code builds reliable and without warning.. - Remove __invalidate_kernel_vmap_range - Remove plat_timer_setup - Declare various variables & functions static - Abstract CPU core & VP(E) ID access through accessor functions - Store core & VP IDs in GlobalNumber-style variable - Unify checks for sibling CPUs - Add CPU cluster number accessors - Prevent direct use of generic_defconfig - Make CONFIG_MIPS_MT_SMP default y - Add __ioread64_copy - Remove unnecessary inclusions of linux/irqchip/mips-gic.h GIC: - Introduce asm/mips-gic.h with accessor functions - Use new GIC accessor functions in mips-gic-timer - Remove counter access functions from irq-mips-gic.c - Remove gic_read_local_vp_id() from irq-mips-gic.c - Simplify shared interrupt pending/mask reads in irq-mips-gic.c - Simplify gic_local_irq_domain_map() in irq-mips-gic.c - Drop gic_(re)set_mask() functions in irq-mips-gic.c - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(), gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c. - Convert remaining shared reg access, local int mask access and remaining local reg access to new accessors - Move GIC_LOCAL_INT_* to asm/mips-gic.h - Remove GIC_CPU_INT* macros from irq-mips-gic.c - Move various definitions to the driver - Remove gic_get_usm_range() - Remove __gic_irq_dispatch() forward declaration - Remove gic_init() - Use mips_gic_present() in place of gic_present and remove gic_present - Move gic_get_c0_*_int() to asm/mips-gic.h - Remove linux/irqchip/mips-gic.h - Inline __gic_init() - Inline gic_basic_init() - Make pcpu_masks a per-cpu variable - Use pcpu_masks to avoid reading GIC_SH_MASK* - Clean up mti, reserved-cpu-vectors handling - Use cpumask_first_and() in gic_set_affinity() - Let the core set struct irq_common_data affinity microMIPS: - Fix microMIPS stack unwinding on big endian systems MIPS-GIC: - SYNC after enabling GIC region NUMA: - Remove the unused parent_node() macro R6: - Constify r2_decoder_tables - Add accessor & bit definitions for GlobalNumber SMP: - Constify smp ops - Allow boot_secondary SMP op to return errors VDSO: - Drop gic_get_usm_range() usage - Avoid use of linux/irqchip/mips-gic.h Platform changes: Alchemy: - Add devboard machine type to cpuinfo - update cpu feature overrides - Threaded carddetect irqs for devboards AR7: - allow NULL clock for clk_get_rate BCM63xx: - Fix ENETDMA_6345_MAXBURST_REG offset - Allow NULL clock for clk_get_rate CI20: - Enable GPIO and RTC drivers in defconfig - Add ethernet and fixed-regulator nodes to DTS Generic platform: - Move Boston and NI 169445 FIT image source to their own files - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Include asm/bootinfo.h for plat_fdt_relocated() - Include asm/time.h for get_c0_*_int() - Allow filtering enabled boards by requirements - Don't explicitly disable CONFIG_USB_SUPPORT - Bump default NR_CPUS to 16 JZ4700: - Probe the jz4740-rtc driver from devicetree Lantiq: - Drop check of boot select from the spi-falcon driver. - Drop check of boot select from the lantiq-flash MTD driver. - Access boot cause register in the watchdog driver through regmap - Add device tree binding documentation for the watchdog driver - Add docs for the RCU DT bindings. - Convert the fpi bus driver to a platform_driver - Remove ltq_reset_cause() and ltq_boot_select( - Switch to a proper reset driver - Switch to a new drivers/soc GPHY driver - Add an USB PHY driver for the Lantiq SoCs using the RCU module - Use of_platform_default_populate instead of __dt_register_buses - Enable MFD_SYSCON to be able to use it for the RCU MFD - Replace ltq_boot_select() with dummy implementation. Loongson 2F: - Allow NULL clock for clk_get_rate Malta: - Use new GIC accessor functions NI 169445: - Add support for NI 169445 board. - Only include in 32r2el kernels Octeon: - Add support for watchdog of 78XX SOCs. - Add support for watchdog of CN68XX SOCs. - Expose support for mips32r1, mips32r2 and mips64r1 - Enable more drivers in config file - Add support for accessing the boot vector. - Remove old boot vector code from watchdog driver - Define watchdog registers for 70xx, 73xx, 78xx, F75xx. - Make CSR functions node aware. - Allow access to CIU3 IRQ domains. - Misc cleanups in the watchdog driver Omega2+: - New board, add support and defconfig Pistachio: - Enable Root FS on NFS in defconfig Ralink: - Add Mediatek MT7628A SoC - Allow NULL clock for clk_get_rate - Explicitly request exclusive reset control in the pci-mt7620 PCI driver. SEAD3: - Only include in 32 bit kernels by default VoCore: - Add VoCore as a vendor t0 dt-bindings - Add defconfig file" * '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits) MIPS: Refactor handling of stack pointer in get_frame_info MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems MIPS: microMIPS: Fix decoding of swsp16 instruction MIPS: microMIPS: Fix decoding of addiusp instruction MIPS: microMIPS: Fix detection of addiusp instruction MIPS: Handle non word sized instructions when examining frame MIPS: ralink: allow NULL clock for clk_get_rate MIPS: Loongson 2F: allow NULL clock for clk_get_rate MIPS: BCM63XX: allow NULL clock for clk_get_rate MIPS: AR7: allow NULL clock for clk_get_rate MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset mips: Save all registers when saving the frame MIPS: Add DWARF unwinding to assembly MIPS: Make SAVE_SOME more standard MIPS: Fix issues in backtraces MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree MIPS: Ci20: Enable RTC driver watchdog: octeon-wdt: Add support for 78XX SOCs. watchdog: octeon-wdt: Add support for cn68XX SOCs. watchdog: octeon-wdt: File cleaning. ...
2017-09-15Merge tag 'pci-v4.14-fixes-1' of ↵Linus Torvalds1-11/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Revert an attempt to fix a race while enabling upstream bridges because it broke iwlwifi firmware loading" * tag 'pci-v4.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Avoid race while enabling upstream bridges"
2017-09-15scsi: aacraid: error: testing array offset 'bus' after useNikola Pajkovsky1-8/+12
Fix possible indexing array of bound for &aac->hba_map[bus][cid], where bus and cid boundary check happens later. Fixes: 0d643ff3c353 ("scsi: aacraid: use aac_tmf_callback for reset fib") Signed-off-by: Nikola Pajkovsky <[email protected]> Reviewed-by: Dave Carroll <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.