aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-09-21selftests: lib.mk: fix test executable status check to use full pathShuah Khan1-1/+1
Fix test executable status check to use full path for make O=dir case,m when tests are relocated to user specified object directory. Without the full path, this check fails to find the file and fails the test. Signed-off-by: Shuah Khan <[email protected]>
2017-09-21selftests: Makefile: clear LDFLAGS for make O=dir use-caseShuah Khan1-0/+4
kselftest target fails when object directory is specified to relocate objects. Inherited "LDFLAGS = -m" fails the test builds. Clear it. Signed-off-by: Shuah Khan <[email protected]>
2017-09-21selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir caseShuah Khan1-0/+15
kselftest and kselftest-clean targets fail when object directory is specified to relocate objects. Main Makefile make O= path clears the built-in defines LINK.c, COMPILE.S, LINK.S, and RM that are used in lib.mk to build and clean targets. Define them. Signed-off-by: Shuah Khan <[email protected]>
2017-09-21Makefile: kselftest and kselftest-clean fail for make O=dir caseShuah Khan1-2/+2
kselftest and kselftest-clean targets fail when object directory is specified to relocate objects. Fix it so it can find the source tree to build from. make O=/tmp/kselftest_top kselftest make[1]: Entering directory '/tmp/kselftest_top' make[2]: Entering directory '/tmp/kselftest_top' make[2]: *** tools/testing/selftests: No such file or directory. Stop. make[2]: Leaving directory '/tmp/kselftest_top' ./linux-kselftest/Makefile:1185: recipe for target 'kselftest' failed make[1]: *** [kselftest] Error 2 make[1]: Leaving directory '/tmp/kselftest_top' Makefile:145: recipe for target 'sub-make' failed make: *** [sub-make] Error 2 Signed-off-by: Shuah Khan <[email protected]> Acked-by: Masahiro Yamada <[email protected]>
2017-09-21pinctrl: bcm2835: fix build warning in bcm2835_gpio_irq_handle_bankCorentin Labbe1-4/+0
This patch fix the following build warning: drivers/pinctrl/bcm/pinctrl-bcm2835.c:376:15: warning: variable 'type' set but not used [-Wunused-but-set-variable] Furthermore, it is unused for a long time, at least since commit 85ae9e512f43 ("pinctrl: bcm2835: switch to GPIOLIB_IRQCHIP") where a "FIXME no clue why the code looks up the type here" was added. A year after, nobody answeered this question, so its time to remove it. Signed-off-by: Corentin Labbe <[email protected]> Acked-by: Stefan Wahren <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-09-21gpio: omap: omap_gpio_show_rev is not __initArnd Bergmann1-1/+1
The probe function calls omap_gpio_show_rev(), which on most compilers is inlined, but on the old gcc-4.6 is not, causing a valid warning about the incorrect __init annotation: WARNING: vmlinux.o(.text+0x40f614): Section mismatch in reference from the function omap_gpio_probe() to the function .init.text:omap_gpio_show_rev() The function omap_gpio_probe() references the function __init omap_gpio_show_rev(). This is often because omap_gpio_probe lacks a __init annotation or the annotation of omap_gpio_show_rev is wrong. This removes the __init. Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-09-21reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TESTGeert Uytterhoeven1-1/+1
The HSDK reset driver is only useful when building for an ARC HSDK platform. While at it, drop the "default n", as that is the default. Fixes: e0be864f14240cb1 ("ARC: reset: introduce HSDKv1 reset driver") Signed-off-by: Geert Uytterhoeven <[email protected]> [[email protected]: rebased, renamed RESET_HSDK_V1 to RESET_HSDK] Signed-off-by: Philipp Zabel <[email protected]>
2017-09-21Merge tag 'irqchip-4.14-2' of ↵Thomas Gleixner3-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates from Marc Zyngier - A GICv3 initialisation fix when some CPUs fail to be brought up - A GICv4 compile fix for GCC 4.5 (!) - A MIPS-GIC fix for the PCIe support
2017-09-21Revert "genirq: Restrict effective affinity to interrupts actually using it"Thomas Gleixner1-4/+1
This reverts commit 74def747bcd09692bdbf8c6a15350795b0f11ca8. The change to the helper function is only correct for the /proc/irq/ readout usage, but breaks the existing x86 usage of that function. Reported-by: Yanko Kaneti <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Marc Zyngier <[email protected]>
2017-09-21powerpc/pseries: Fix parent_dn reference leak in add_dt_node()Tyrel Datwyler1-1/+3
A reference to the parent device node is held by add_dt_node() for the node to be added. If the call to dlpar_configure_connector() fails add_dt_node() returns ENOENT and that reference is not freed. Add a call to of_node_put(parent_dn) prior to bailing out after a failed dlpar_configure_connector() call. Fixes: 8d5ff320766f ("powerpc/pseries: Make dlpar_configure_connector parent node aware") Cc: [email protected] # v3.12+ Signed-off-by: Tyrel Datwyler <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2017-09-21powerpc/pseries: Fix "OF: ERROR: Bad of_node_put() on /cpus" during DLPARTyrel Datwyler2-2/+5
Commit 215ee763f8cb ("powerpc: pseries: remove dlpar_attach_node dependency on full path") reworked dlpar_attach_node() to no longer look up the parent node "/cpus", but instead to have the parent node passed by the caller in the function parameter list. As a result dlpar_attach_node() is no longer responsible for freeing the reference to the parent node. However, commit 215ee763f8cb failed to remove the of_node_put(parent) call in dlpar_attach_node(), or to take into account that the reference to the parent in the caller dlpar_cpu_add() needs to be held until after dlpar_attach_node() returns. As a result doing repeated cpu add/remove dlpar operations will eventually result in the following error: OF: ERROR: Bad of_node_put() on /cpus CPU: 0 PID: 10896 Comm: drmgr Not tainted 4.13.0-autotest #1 Call Trace: dump_stack+0x15c/0x1f8 (unreliable) of_node_release+0x1a4/0x1c0 kobject_put+0x1a8/0x310 kobject_del+0xbc/0xf0 __of_detach_node_sysfs+0x144/0x210 of_detach_node+0xf0/0x180 dlpar_detach_node+0xc4/0x120 dlpar_cpu_remove+0x280/0x560 dlpar_cpu_release+0xbc/0x1b0 arch_cpu_release+0x6c/0xb0 cpu_release_store+0xa0/0x100 dev_attr_store+0x68/0xa0 sysfs_kf_write+0xa8/0xf0 kernfs_fop_write+0x2cc/0x400 __vfs_write+0x5c/0x340 vfs_write+0x1a8/0x3d0 SyS_write+0xa8/0x1a0 system_call+0x58/0x6c Fix the issue by removing the of_node_put(parent) call from dlpar_attach_node(), and ensuring that the reference to the parent node is properly held and released by the caller dlpar_cpu_add(). Fixes: 215ee763f8cb ("powerpc: pseries: remove dlpar_attach_node dependency on full path") Signed-off-by: Tyrel Datwyler <[email protected]> Reported-by: Abdul Haleem <[email protected]> [mpe: Add a comment in the code and frob the change log slightly] Signed-off-by: Michael Ellerman <[email protected]>
2017-09-21Merge tag 'fixes-for-v4.14-rc2' of ↵Greg Kroah-Hartman5-8/+19
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.14-rc2 First set of fixes for the gadget side. Not much this time around, things have been rather calm. In no order whatsoever, this pull request contains: - A DMA starvation fix on dwc3 caused by some recent changes to how we map/unmap requests - A build error fix on the snps_udc_plat.c driver - A fix for how to we call ->udc_set_speed() - Spinlock recursion fix on the printer gadget - Removal of pointless comparisons on dummy driver
2017-09-21powerpc/eeh: Create PHB PEs after EEH is initializedBenjamin Herrenschmidt2-18/+4
Otherwise we end up not yet having computed the right diag data size on powernv where EEH initialization is delayed, thus causing memory corruption later on when calling OPAL. Fixes: 5cb1f8fdddb7 ("powerpc/powernv/pci: Dynamically allocate PHB diag data") Cc: [email protected] # v4.13+ Signed-off-by: Benjamin Herrenschmidt <[email protected]> Acked-by: Russell Currey <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2017-09-20ipc/shm: Fix order of parameters when calling copy_compat_shmid_to_userWill Deacon1-1/+1
Commit 553f770ef71b ("ipc: move compat shmctl to native") moved the compat IPC syscall handling into ipc/shm.c and refactored the struct accessors in the process. Unfortunately, the call to copy_compat_shmid_to_user when handling a compat {IPC,SHM}_STAT command gets the arguments the wrong way round, passing a kernel stack address as the user buffer (destination) and the user buffer as the kernel stack address (source). This patch fixes the parameter ordering so the buffers are accessed correctly. Cc: Al Viro <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Al Viro <[email protected]>
2017-09-20iov_iter: fix page_copy_sane for compound pagesPetar Penkov1-2/+4
Issue is that if the data crosses a page boundary inside a compound page, this check will incorrectly trigger a WARN_ON. To fix this, compute the order using the head of the compound page and adjust the offset to be relative to that head. Fixes: 72e809ed81ed ("iov_iter: sanity checks for copy to/from page primitives") Signed-off-by: Petar Penkov <[email protected]> CC: Al Viro <[email protected]> CC: Eric Dumazet <[email protected]> Signed-off-by: Al Viro <[email protected]>
2017-09-20SMB: Validate negotiate (to protect against downgrade) even if signing offSteve French1-5/+12
As long as signing is supported (ie not a guest user connection) and connection is SMB3 or SMB3.02, then validate negotiate (protect against man in the middle downgrade attacks). We had been doing this only when signing was required, not when signing was just enabled, but this more closely matches recommended SMB3 behavior and is better security. Suggested by Metze. Signed-off-by: Steve French <[email protected]> Reviewed-by: Jeremy Allison <[email protected]> Acked-by: Stefan Metzmacher <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> CC: Stable <[email protected]>
2017-09-20cifs: release auth_key.response for reconnect.Shu Wang1-0/+8
There is a race that cause cifs reconnect in cifs_mount, - cifs_mount - cifs_get_tcp_session - [ start thread cifs_demultiplex_thread - cifs_read_from_socket: -ECONNABORTED - DELAY_WORK smb2_reconnect_server ] - cifs_setup_session - [ smb2_reconnect_server ] auth_key.response was allocated in cifs_setup_session, and will release when the session destoried. So when session re- connect, auth_key.response should be check and released. Tested with my system: CIFS VFS: Free previous auth_key.response = ffff8800320bbf80 A simple auth_key.response allocation call trace: - cifs_setup_session - SMB2_sess_setup - SMB2_sess_auth_rawntlmssp_authenticate - build_ntlmssp_auth_blob - setup_ntlmv2_rsp Signed-off-by: Shu Wang <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2017-09-20cifs: release cifs root_cred after exit_cifsShu Wang1-1/+1
memory leak was found by kmemleak. exit_cifs_spnego should be called before cifs module removed, or cifs root_cred will not be released. kmemleak report: unreferenced object 0xffff880070a3ce40 (size 192): backtrace: kmemleak_alloc+0x4a/0xa0 kmem_cache_alloc+0xc7/0x1d0 prepare_kernel_cred+0x20/0x120 init_cifs_spnego+0x2d/0x170 [cifs] 0xffffffffc07801f3 do_one_initcall+0x51/0x1b0 do_init_module+0x60/0x1fd load_module+0x161e/0x1b60 SYSC_finit_module+0xa9/0x100 SyS_finit_module+0xe/0x10 Signed-off-by: Shu Wang <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> CC: Stable <[email protected]>
2017-09-20CIFS: make arrays static const, reduces object code sizeColin Ian King1-4/+8
Don't populate the read-only arrays types[] on the stack, instead make them both static const. Makes the object code smaller by over 200 bytes: Before: text data bss dec hex filename 111503 37696 448 149647 2488f fs/cifs/file.o After: text data bss dec hex filename 111140 37856 448 149444 247c4 fs/cifs/file.o Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2017-09-20Merge branch 'hns3-tm-fixes'David S. Miller7-103/+143
Yunsheng Lin says: ==================== TM related bugfixes for the HNS3 Ethernet Driver This patch set contains a few bugfixes related to hclge_tm module. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: hns3: Fix for pri to tc mapping in TMYunsheng Lin3-9/+12
Current mapping between pri and tc is one to one, so user can't map multi priorities to the same tc. This patch changes the mapping to many to one. Fixes: 848440544b41f ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: hns3: Fix for setting rss_size incorrectlyYunsheng Lin3-40/+38
rss_size is 1, 2, 4, 8, 16, 32, 64, 128, but acutal tc queue size can be any u16 less than 128. If tc queue size is 5, we set the rss_size to 8, indirection table will be used to limit the size of actual queue size. It may cause dropping of receiving packet in hardware if rss_size is not set correctly. For now, each TC has the same rss size. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: hns3: Fix typo error for feild in hclge_tmYunsheng Lin2-12/+12
This patch fixes a typo error for feild, which should be field. Fixes: 848440544b41f ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: hns3: Fix for rx priv buf allocation when DCB is not supportedYunsheng Lin1-0/+10
When hdev doesn't support DCB, rx private buffer is not allocated, otherwise there is not enough buffer for rx shared buffer, causing buffer allocation process to fail. This patch fixes by checking the dcb capability in hclge_rx_buffer_calc. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: hns3: Fix for rx_priv_buf_alloc not setting rx shared bufferYunsheng Lin2-1/+6
rx_priv_buf_alloc is used to tell hardware how much buffer is used for rx direction, right now only the private buffer is assigned. For ae_dev that doesn't support DCB, private rx buffer is assigned to zero, only shared rx buffer is used. So not setting the shared rx buffer cause dropping of packet in SSU. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: hns3: Fix for not setting rx private buffer size to zeroYunsheng Lin1-2/+14
When rx private buffer is disabled, there may be some case that the rx private buffer is not set to zero, which may cause buffer allocation process to fail. This patch fixes this problem by setting priv->enable to 0 and priv->buf_size to zero when rx private buffer is disabled. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: hns3: Fix for DEFAULT_DV when dev doesn't support DCBYunsheng Lin2-1/+6
When ae_dev doesn't support DCB, DEFAULT_DV must be set to a lower value, otherwise the buffer allocation process will fail. This patch fix it by setting it to 30K bytes. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: hns3: Fix initialization when cmd is not supportedYunsheng Lin4-16/+31
When ae_dev doesn't support DCB, rx_priv_wl_config, common_thrd_config and tm_qs_bp_cfg can't be called, otherwise cmd return fail, which causes the hclge module initialization process to fail. This patch fix it by adding a DCB capability flag to check if the ae_dev support DCB. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: hns3: Cleanup for ROCE capability flag in ae_devYunsheng Lin3-27/+19
This patch add the ROCE supported flag in the driver_data field of pci_device_id, delete roce_pci_tbl and change HNAE_DEV_SUPPORT_ROCE_B to HNAE3_DEV_SUPPORT_ROCE_B. This cleanup is done in order to support adding capability in pci_device_id and to fix initialization failure when cmd is not supported. Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2-7/+19
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two Netfilter fixes for your net tree, they are: 1) Fix NAt compilation with UP, from Geert Uytterhoeven. 2) Fix incorrect number of entries when dumping a set, from Vishwanath Pai. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-09-20isdn/i4l: fetch the ppp_write buffer in one shotMeng Xu1-12/+25
In isdn_ppp_write(), the header (i.e., protobuf) of the buffer is fetched twice from userspace. The first fetch is used to peek at the protocol of the message and reset the huptimer if necessary; while the second fetch copies in the whole buffer. However, given that buf resides in userspace memory, a user process can race to change its memory content across fetches. By doing so, we can either avoid resetting the huptimer for any type of packets (by first setting proto to PPP_LCP and later change to the actual type) or force resetting the huptimer for LCP packets. This patch changes this double-fetch behavior into two single fetches decided by condition (lp->isdn_device < 0 || lp->isdn_channel <0). A more detailed discussion can be found at https://marc.info/?l=linux-kernel&m=150586376926123&w=2 Signed-off-by: Meng Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: fec: return IRQ_HANDLED if fec_ptp_check_pps_event handled itTroy Kisky1-2/+2
fec_ptp_check_pps_event will return 1 if FEC_T_TF_MASK caused an interrupt. Don't return IRQ_NONE in this case. Signed-off-by: Troy Kisky <[email protected]> Acked-by: Fugang Duan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: fec: remove unused interrupt FEC_ENET_TS_TIMERTroy Kisky1-2/+2
FEC_ENET_TS_TIMER is not checked in the interrupt routine so there is no need to enable it. Signed-off-by: Troy Kisky <[email protected]> Acked-by: Fugang Duan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: fec: only check queue 0 if RXF_0/TXF_0 interrupt is setTroy Kisky1-2/+2
Before queue 0 was always checked if any queue caused an interrupt. It is better to just mark queue 0 if queue 0 has caused an interrupt. Signed-off-by: Troy Kisky <[email protected]> Acked-by: Fugang Duan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: change skb->mac_header when Generic XDP calls adjust_headEdward Cree1-0/+1
Since XDP's view of the packet includes the MAC header, moving the start- of-packet with bpf_xdp_adjust_head needs to also update the offset of the MAC header (which is relative to skb->head, not to the skb->data that was changed). Without this, tcpdump sees packets starting from the old MAC header rather than the new one, at least in my tests on the loopback device. Fixes: b5cdae3291f7 ("net: Generic XDP") Signed-off-by: Edward Cree <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20net: compat: assert the size of cmsg copied in is as expectedMeng Xu1-0/+7
The actual length of cmsg fetched in during the second loop (i.e., kcmsg - kcmsg_base) could be different from what we get from the first loop (i.e., kcmlen). The main reason is that the two get_user() calls in the two loops (i.e., get_user(ucmlen, &ucmsg->cmsg_len) and __get_user(ucmlen, &ucmsg->cmsg_len)) could cause ucmlen to have different values even they fetch from the same userspace address, as user can race to change the memory content in &ucmsg->cmsg_len across fetches. Although in the second loop, the sanity check if ((char *)kcmsg_base + kcmlen - (char *)kcmsg < CMSG_ALIGN(tmp)) is inplace, it only ensures that the cmsg fetched in during the second loop does not exceed the length of kcmlen, but not necessarily equal to kcmlen. But indicated by the assignment kmsg->msg_controllen = kcmlen, we should enforce that. This patch adds this additional sanity check and ensures that what is recorded in kmsg->msg_controllen is the actual cmsg length. Signed-off-by: Meng Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20drm/amdkfd: Print event limit messages only once per processFelix Kuehling2-1/+5
To avoid spamming the log. Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Oded Gabbay <[email protected]> Signed-off-by: Oded Gabbay <[email protected]>
2017-09-20drm/amdkfd: Fix kernel-queue wrapping bugsYong Zhao1-3/+15
Avoid intermediate negative numbers when doing calculations with a mix of signed and unsigned variables where implicit conversions can lead to unexpected results. When kernel queue buffer wraps around to 0, we need to check that rptr won't be overwritten by the new packet. Signed-off-by: Yong Zhao <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Signed-off-by: Oded Gabbay <[email protected]>
2017-09-20drm/amdkfd: Fix incorrect destroy_mqd parameterFelix Kuehling1-1/+1
When uninitializing a kernel queue. Signed-off-by: Yong Zhao <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Oded Gabbay <[email protected]> Signed-off-by: Oded Gabbay <[email protected]>
2017-09-21Merge tag 'exynos-drm-fixes-for-v4.14-rc1' of ↵Dave Airlie6-27/+55
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes - fix suspend/resume issues. - fix memory corruption detected by kasan. - fix build error on x86. * tag 'exynos-drm-fixes-for-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos/hdmi: Fix unsafe list iteration drm: exynos: include linux/irq.h drm/exynos: Fix suspend/resume support drm/exynos: Fix locking in the suspend/resume paths
2017-09-21Merge tag 'drm-intel-fixes-2017-09-20' of ↵Dave Airlie5-80/+53
git://anongit.freedesktop.org/git/drm-intel into drm-fixes drm/i915 fixes for 4.14-rc1 Couple fixes for stable: - Fix MIPI panels on BXT. - Fix PCI BARs information on GVT. Plus other fixes: - Fix minimal brightness for BXT, GLK, CFL and CNL. - Fix compilation warning: unused in_vbl - Fix error handling in intel_framebuffer_init * tag 'drm-intel-fixes-2017-09-20' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Remove unused 'in_vbl' from i915_get_crtc_scanoutpos() drm/i915/cnp: set min brightness from VBT Revert "drm/i915/bxt: Disable device ready before shutdown command" drm/i915/bxt: set min brightness from VBT drm/i915: Fix an error handling in 'intel_framebuffer_init()' drm/i915/gvt: Fix incorrect PCI BARs reporting
2017-09-20[SMB3] Update session and share information displayed for debugging SMB2/SMB3Steve French1-2/+7
We were not displaying some key fields (session status and capabilities and whether guest authenticated) for SMB2/SMB3 session in /proc/fs/cifs/DebugData. This is needed for real world triage of problems with the (now much more common) SMB3 mounts. Signed-off-by: Steve French <[email protected]>
2017-09-20bpf: one perf event close won't free bpf program attached by another perf eventYonghong Song2-1/+3
This patch fixes a bug exhibited by the following scenario: 1. fd1 = perf_event_open with attr.config = ID1 2. attach bpf program prog1 to fd1 3. fd2 = perf_event_open with attr.config = ID1 <this will be successful> 4. user program closes fd2 and prog1 is detached from the tracepoint. 5. user program with fd1 does not work properly as tracepoint no output any more. The issue happens at step 4. Multiple perf_event_open can be called successfully, but only one bpf prog pointer in the tp_event. In the current logic, any fd release for the same tp_event will free the tp_event->prog. The fix is to free tp_event->prog only when the closing fd corresponds to the one which registered the program. Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20packet: hold bind lock when rebinding to fanout hookWillem de Bruijn1-5/+11
Packet socket bind operations must hold the po->bind_lock. This keeps po->running consistent with whether the socket is actually on a ptype list to receive packets. fanout_add unbinds a socket and its packet_rcv/tpacket_rcv call, then binds the fanout object to receive through packet_rcv_fanout. Make it hold the po->bind_lock when testing po->running and rebinding. Else, it can race with other rebind operations, such as that in packet_set_ring from packet_rcv to tpacket_rcv. Concurrent updates can result in a socket being added to a fanout group twice, causing use-after-free KASAN bug reports, among others. Reported independently by both trinity and syzkaller. Verified that the syzkaller reproducer passes after this patch. Fixes: dc99f600698d ("packet: Add fanout support.") Reported-by: nixioaming <[email protected]> Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-09-20ALSA: usb-audio: Add sample rate quirk for Plantronics C310/C520-MKai-Heng Feng1-0/+2
Like other Plantronics devices, C310 and C520-M do not support sample rate reading. Add them to the sample rate quirk accordingly. BugLink: https://bugs.launchpad.net/bugs/1708499 BugLink: https://bugs.launchpad.net/bugs/1709282 Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-09-20PCI: endpoint: Use correct "end of test" interruptJohn Keeping1-7/+6
pci_epf_test_raise_irq() reads the interrupt to use for the response from reg->command, but this has been cleared at the beginning of the command handler so the value is always zero at this point. Instead, extract the interrupt index before handling the command and then pass the requested interrupt into pci_epf_test_raise_irq(). This allows us to remove the specific code to extract the interrupt for COMMAND_RAISE_MSI_IRQ since it is now handled in common code. Fixes: 3ecf3232c54c ("PCI: endpoint: Do not reset *command* inadvertently") Signed-off-by: John Keeping <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Kishon Vijay Abraham I <[email protected]>
2017-09-20Merge tag 'trace-v4.14-rc1' of ↵Linus Torvalds3-3/+19
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "This includes three minor fixes. - Have writing to trace file clear the irqsoff (and friends) tracer - trace_pipe behavior for instance buffers was different than top buffer - Show a message of why mmiotrace doesn't start from commandline" * tag 'trace-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix trace_pipe behavior for instance traces tracing: Ignore mmiotrace from kernel commandline tracing: Erase irqsoff trace with empty write
2017-09-20scripts/dtc: dtx_diff - 2nd update of include dts paths to match buildFrank Rowand1-13/+9
Update dtx_diff include paths in the same manner as: commit b12869a8d519 ("of: remove drivers/of/testcase-data from include search path for CPP"), commit 5ffa2aed389c ("of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP"), and commit 50f9ddaf64e1 ("of: search scripts/dtc/include-prefixes path for both CPP and DTC"). Remove proposed include path kernel/dts/, which was never implemented for the dtb build. For the diff case, each source file is compiled separately. For each of those compiles, provide the location of the source file as an include path, not the location of both source files. Signed-off-by: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2017-09-21kbuild: rpm-pkg: fix version number handlingMasahiro Yamada3-15/+2
The "Release:" field of the spec file is determined based on the .version file. However, the .version file is not copied to the source tar file. So, when we build the kernel from the source package, the UTS_VERSION always indicates #1. This does not match with "rpm -q". The kernel UTS_VERSION and "rpm -q" do not agree for binrpm-pkg, either. Please note the kernel has already been built before the spec file is created. Currently, mkspec invokes mkversion. This script returns an incremented version. So, the "Release:" field of the spec file is greater than the version in the kernel by one. For the source package build (where .version file is missing), we can give KBUILD_BUILD_VERSION=%{release} to the build command. For the binary package build, we can simply read out the .version file because it contains the version number that was used for building the kernel image. We can remove scripts/mkversion because scripts/package/Makefile need not touch the .version file. Signed-off-by: Masahiro Yamada <[email protected]>
2017-09-21kbuild: deb-pkg: remove firmware package supportMasahiro Yamada1-21/+1
Commit 5620a0d1aacd ("firmware: delete in-kernel firmware") deleted in-kernel firmware support, including the firmware install command. So, the firmware package does not make sense any more. Remove it. Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Riku Voipio <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.