aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-12-02iwlwifi: update MAINTAINERS entryJohannes Berg1-3/+0
Reflect the fact that the [email protected] address will disappear, and that neither Emmanuel nor myself are really much involved with the maintenance these days. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20201129151117.a25afe6d2c7f.I8f13a5689dd353825fb2b9bd5b6f0fbce92cb12b@changeid
2020-12-02s390: fix irq state tracingHeiko Carstens2-18/+2
With commit 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing") common code calls arch_cpu_idle() with a lockdep state that tells irqs are on. This doesn't work very well for s390: psw_idle() will enable interrupts to wait for an interrupt. As soon as an interrupt occurs the interrupt handler will verify if the old context was psw_idle(). If that is the case the interrupt enablement bits in the old program status word will be cleared. A subsequent test in both the external as well as the io interrupt handler checks if in the old context interrupts were enabled. Due to the above patching of the old program status word it is assumed the old context had interrupts disabled, and therefore a call to TRACE_IRQS_OFF (aka trace_hardirqs_off_caller) is skipped. Which in turn makes lockdep incorrectly "think" that interrupts are enabled within the interrupt handler. Fix this by unconditionally calling TRACE_IRQS_OFF when entering interrupt handlers. Also call unconditionally TRACE_IRQS_ON when leaving interrupts handlers. This leaves the special psw_idle() case, which now returns with interrupts disabled, but has an "irqs on" lockdep state. So callers of psw_idle() must adjust the state on their own, if required. This is currently only __udelay_disabled(). Fixes: 58c644ba512c ("sched/idle: Fix arch_cpu_idle() vs tracing") Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2020-12-02s390/pci: fix CPU address in MSI for directed IRQAlexander Gordeev1-3/+11
The directed MSIs are delivered to CPUs whose address is written to the MSI message address. The current code assumes that a CPU logical number (as it is seen by the kernel) is also the CPU address. The above assumption is not correct, as the CPU address is rather the value returned by STAP instruction. That value does not necessarily match the kernel logical CPU number. Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts") Cc: <[email protected]> # v5.2+ Signed-off-by: Alexander Gordeev <[email protected]> Reviewed-by: Halil Pasic <[email protected]> Reviewed-by: Niklas Schnelle <[email protected]> Signed-off-by: Niklas Schnelle <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2020-12-02i2c: qcom: Fix IRQ error misassignementRobert Foss1-2/+2
During cci_isr() errors read from register fields belonging to i2c master1 are currently assigned to the status field belonging to i2c master0. This patch corrects this error, and always assigns master1 errors to the status field of master1. Fixes: e517526195de ("i2c: Add Qualcomm CCI I2C driver") Reported-by: Loic Poulain <[email protected]> Suggested-by: Loic Poulain <[email protected]> Signed-off-by: Robert Foss <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-12-02i2c: qup: Fix error return code in qup_i2c_bam_schedule_desc()Zhihao Cheng1-1/+2
Fix to return the error code from qup_i2c_change_state() instaed of 0 in qup_i2c_bam_schedule_desc(). Fixes: fbf9921f8b35d9b2 ("i2c: qup: Fix error handling") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Zhihao Cheng <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-12-02powerpc/64s/powernv: Fix memory corruption when saving SLB entries on MCENicholas Piggin1-2/+7
This can be hit by an HPT guest running on an HPT host and bring down the host, so it's quite important to fix. Fixes: 7290f3b3d3e6 ("powerpc/64s/powernv: machine check dump SLB contents") Cc: [email protected] # v5.4+ Signed-off-by: Nicholas Piggin <[email protected]> Acked-by: Mahesh Salgaonkar <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-02vhost_vdpa: return -EFAULT if copy_to_user() failsDan Carpenter1-1/+3
The copy_to_user() function returns the number of bytes remaining to be copied but this should return -EFAULT to the user. Fixes: 1b48dc03e575 ("vhost: vdpa: report iova range") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/X8c32z5EtDsMyyIL@mwanda Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]>
2020-12-02vdpa: mlx5: fix vdpa/vhost dependenciesRandy Dunlap2-0/+2
drivers/vdpa/mlx5/ uses vhost_iotlb*() interfaces, so select VHOST_IOTLB to make them be built. However, if VHOST_IOTLB is the only VHOST symbol that is set/enabled, the object file still won't be built because drivers/Makefile won't descend into drivers/vhost/ to build it, so make drivers/Makefile build the needed binary whenever VHOST_IOTLB is set, like it does for VHOST_RING. Fixes these build errors: ERROR: modpost: "vhost_iotlb_itree_next" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined! ERROR: modpost: "vhost_iotlb_itree_first" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined! Fixes: 29064bfdabd5 ("vdpa/mlx5: Add support library for mlx5 VDPA implementation") Fixes: aff90770e54c ("vdpa/mlx5: Fix dependency on MLX5_CORE") Reported-by: kernel test robot <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> Cc: Eli Cohen <[email protected]> Cc: Parav Pandit <[email protected]> Cc: "Michael S. Tsirkin" <[email protected]> Cc: Jason Wang <[email protected]> Cc: [email protected] Cc: Saeed Mahameed <[email protected]> Cc: Leon Romanovsky <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]>
2020-12-01geneve: pull IP header before ECN decapsulationEric Dumazet1-4/+16
IP_ECN_decapsulate() and IP6_ECN_decapsulate() assume IP header is already pulled. geneve does not ensure this yet. Fixing this generically in IP_ECN_decapsulate() and IP6_ECN_decapsulate() is not possible, since callers pass a pointer that might be freed by pskb_may_pull() syzbot reported : BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260 CPU: 1 PID: 8941 Comm: syz-executor.0 Not tainted 5.10.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x5f/0xa0 mm/kmsan/kmsan_instr.c:197 __INET_ECN_decapsulate include/net/inet_ecn.h:238 [inline] INET_ECN_decapsulate+0x345/0x1db0 include/net/inet_ecn.h:260 geneve_rx+0x2103/0x2980 include/net/inet_ecn.h:306 geneve_udp_encap_recv+0x105c/0x1340 drivers/net/geneve.c:377 udp_queue_rcv_one_skb+0x193a/0x1af0 net/ipv4/udp.c:2093 udp_queue_rcv_skb+0x282/0x1050 net/ipv4/udp.c:2167 udp_unicast_rcv_skb net/ipv4/udp.c:2325 [inline] __udp4_lib_rcv+0x399d/0x5880 net/ipv4/udp.c:2394 udp_rcv+0x5c/0x70 net/ipv4/udp.c:2564 ip_protocol_deliver_rcu+0x572/0xc50 net/ipv4/ip_input.c:204 ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_local_deliver+0x583/0x8d0 net/ipv4/ip_input.c:252 dst_input include/net/dst.h:449 [inline] ip_rcv_finish net/ipv4/ip_input.c:428 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip_rcv+0x5c3/0x840 net/ipv4/ip_input.c:539 __netif_receive_skb_one_core net/core/dev.c:5315 [inline] __netif_receive_skb+0x1ec/0x640 net/core/dev.c:5429 process_backlog+0x523/0xc10 net/core/dev.c:6319 napi_poll+0x420/0x1010 net/core/dev.c:6763 net_rx_action+0x35c/0xd40 net/core/dev.c:6833 __do_softirq+0x1a9/0x6fa kernel/softirq.c:298 asm_call_irq_on_stack+0xf/0x20 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline] do_softirq_own_stack+0x6e/0x90 arch/x86/kernel/irq_64.c:77 do_softirq kernel/softirq.c:343 [inline] __local_bh_enable_ip+0x184/0x1d0 kernel/softirq.c:195 local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32 rcu_read_unlock_bh include/linux/rcupdate.h:730 [inline] __dev_queue_xmit+0x3a9b/0x4520 net/core/dev.c:4167 dev_queue_xmit+0x4b/0x60 net/core/dev.c:4173 packet_snd net/packet/af_packet.c:2992 [inline] packet_sendmsg+0x86f9/0x99d0 net/packet/af_packet.c:3017 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] __sys_sendto+0x9dc/0xc80 net/socket.c:1992 __do_sys_sendto net/socket.c:2004 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2000 __x64_sys_sendto+0x6e/0x90 net/socket.c:2000 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-01inet_ecn: Fix endianness of checksum update when setting ECT(1)Toke Høiland-Jørgensen1-1/+1
When adding support for propagating ECT(1) marking in IP headers it seems I suffered from endianness-confusion in the checksum update calculation: In fact the ECN field is in the *lower* bits of the first 16-bit word of the IP header when calculating in network byte order. This means that the addition performed to update the checksum field was wrong; let's fix that. Fixes: b723748750ec ("tunnel: Propagate ECT(1) when decapsulating as recommended by RFC6040") Reported-by: Jonathan Morton <[email protected]> Tested-by: Pete Heist <[email protected]> Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-01Merge tag '5.10-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds2-2/+4
Pull cifs fixes from Steve French: "Two smb3 fixes for stable" * tag '5.10-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix potential use-after-free in cifs_echo_request() cifs: allow syscalls to be restarted in __smb_send_rqst()
2020-12-01Merge tag 'trace-v5.10-rc6' of ↵Linus Torvalds12-62/+138
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Use correct timestamp variable for ring buffer write stamp update - Fix up before stamp and write stamp when crossing ring buffer sub buffers - Keep a zero delta in ring buffer in slow path if cmpxchg fails - Fix trace_printk static buffer for archs that care - Fix ftrace record accounting for ftrace ops with trampolines - Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency - Remove WARN_ON in hwlat tracer that triggers on something that is OK - Make "my_tramp" trampoline in ftrace direct sample code global - Fixes in the bootconfig tool for better alignment management * tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Always check to put back before stamp when crossing pages ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency ftrace: Fix updating FTRACE_FL_TRAMP tracing: Fix alignment of static buffer tracing: Remove WARN_ON in start_thread() samples/ftrace: Mark my_tramp[12]? global ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next() ring-buffer: Update write stamp with the correct ts docs: bootconfig: Update file format on initrd image tools/bootconfig: Align the bootconfig applied initrd image size to 4 tools/bootconfig: Fix to check the write failure correctly tools/bootconfig: Fix errno reference after printf()
2020-12-01tipc: fix incompatible mtu of transmissionHoang Le1-0/+2
In commit 682cd3cf946b6 ("tipc: confgiure and apply UDP bearer MTU on running links"), we introduced a function to change UDP bearer MTU and applied this new value across existing per-link. However, we did not apply this new MTU value at node level. This lead to packet dropped at link level if its size is greater than new MTU value. To fix this issue, we also apply this new MTU value for node level. Fixes: 682cd3cf946b6 ("tipc: confgiure and apply UDP bearer MTU on running links") Acked-by: Jon Maloy <[email protected]> Signed-off-by: Hoang Le <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-01dm writecache: remove BUG() and fail gracefully insteadMike Snitzer1-1/+1
Building on arch/s390/ results in this build error: cc1: some warnings being treated as errors ../drivers/md/dm-writecache.c: In function 'persistent_memory_claim': ../drivers/md/dm-writecache.c:323:1: error: no return statement in function returning non-void [-Werror=return-type] Fix this by replacing the BUG() with an -EOPNOTSUPP return. Fixes: 48debafe4f2f ("dm: add writecache target") Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-12-01dm table: Remove BUG_ON(in_interrupt())Thomas Gleixner1-6/+0
The BUG_ON(in_interrupt()) in dm_table_event() is a historic leftover from a rework of the dm table code which changed the calling context. Issuing a BUG for a wrong calling context is frowned upon and in_interrupt() is deprecated and only covering parts of the wrong contexts. The sanity check for the context is covered by CONFIG_DEBUG_ATOMIC_SLEEP and other debug facilities already. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-12-01dm: fix bug with RCU locking in dm_blk_report_zonesSergei Shtepa1-2/+4
The dm_get_live_table() function makes RCU read lock so dm_put_live_table() must be called even if dm_table map is not found. Fixes: e76239a3748c9 ("block: add a report_zones method") Cc: [email protected] Signed-off-by: Sergei Shtepa <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-12-01Revert "dm cache: fix arm link errors with inline"Nick Desaulniers1-4/+0
This reverts commit 43aeaa29573924df76f44eda2bbd94ca36e407b5. Since commit 0bddd227f3dc ("Documentation: update for gcc 4.9 requirement") the minimum supported version of GCC is gcc-4.9. It's now safe to remove this code. Link: https://github.com/ClangBuiltLinux/linux/issues/427 Signed-off-by: Nick Desaulniers <[email protected]> Acked-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-12-01fs: 9p: add generic splice_write file operationDominique Martinet1-0/+6
The default splice operations got removed recently, add it back to 9p with iter_file_splice_write like many other filesystems do. Link: http://lkml.kernel.org/r/[email protected] Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Signed-off-by: Dominique Martinet <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2020-12-01Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds3-22/+68
Pull vhost fixes from Michael Tsirkin: "A couple of minor fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-vdpa: fix page pinning leakage in error path (rework) vringh: fix vringh_iov_push_*() documentation vhost scsi: fix lun reset completion handling
2020-12-01net: broadcom CNIC: requires MMURandy Dunlap1-0/+1
The CNIC kconfig symbol selects UIO and UIO depends on MMU. Since 'select' does not follow dependency chains, add the same MMU dependency to CNIC. Quietens this kconfig warning: WARNING: unmet direct dependencies detected for UIO Depends on [n]: MMU [=n] Selected by [m]: - CNIC [=m] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && PCI [=y] && (IPV6 [=m] || IPV6 [=m]=n) Fixes: adfc5217e9db ("broadcom: Move the Broadcom drivers") Signed-off-by: Randy Dunlap <[email protected]> Cc: Jeff Kirsher <[email protected]> Cc: Rasesh Mody <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-01Merge branch 'ibmvnic-Bug-fixes-for-queue-descriptor-processing'David S. Miller1-3/+19
Thomas Falcon says: ==================== ibmvnic: Bug fixes for queue descriptor processing This series resolves a few issues in the ibmvnic driver's RX buffer and TX completion processing. The first patch includes memory barriers to synchronize queue descriptor reads. The second patch fixes a memory leak that could occur if the device returns a TX completion with an error code in the descriptor, in which case the respective socket buffer and other relevant data structures may not be freed or updated properly. v3: Correct length of Fixes tags, requested by Jakub Kicinski v2: Provide more detailed comments explaining specifically what reads are being ordered, suggested by Michael Ellerman ==================== Signed-off-by: David S. Miller <[email protected]>
2020-12-01ibmvnic: Fix TX completion error handlingThomas Falcon1-3/+1
TX completions received with an error return code are not being processed properly. When an error code is seen, do not proceed to the next completion before cleaning up the existing entry's data structures. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-01ibmvnic: Ensure that SCRQ entry reads are correctly orderedThomas Falcon1-0/+18
Ensure that received Subordinate Command-Response Queue (SCRQ) entries are properly read in order by the driver. These queues are used in the ibmvnic device to process RX buffer and TX completion descriptors. dma_rmb barriers have been added after checking for a pending descriptor to ensure the correct descriptor entry is checked and after reading the SCRQ descriptor to ensure the entire descriptor is read before processing. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-01block: use gcd() to fix chunk_sectors limit stackingMike Snitzer1-1/+4
commit 22ada802ede8 ("block: use lcm_not_zero() when stacking chunk_sectors") broke chunk_sectors limit stacking. chunk_sectors must reflect the most limited of all devices in the IO stack. Otherwise malformed IO may result. E.g.: prior to this fix, ->chunk_sectors = lcm_not_zero(8, 128) would result in blk_max_size_offset() splitting IO at 128 sectors rather than the required more restrictive 8 sectors. And since commit 07d098e6bbad ("block: allow 'chunk_sectors' to be non-power-of-2") care must be taken to properly stack chunk_sectors to be compatible with the possibility that a non-power-of-2 chunk_sectors may be stacked. This is why gcd() is used instead of reverting back to using min_not_zero(). Fixes: 22ada802ede8 ("block: use lcm_not_zero() when stacking chunk_sectors") Fixes: 07d098e6bbad ("block: allow 'chunk_sectors' to be non-power-of-2") Reported-by: John Dorminy <[email protected]> Reported-by: Bruce Johnston <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> Reviewed-by: John Dorminy <[email protected]> Cc: [email protected] Reviewed-by: Martin K. Petersen <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-12-01Input: atmel_mxt_ts - fix lost interruptsLinus Walleij1-2/+2
After commit 74d905d2d38a devices requiring the workaround for edge triggered interrupts stopped working. The hardware needs the quirk to be used before even proceeding to check if the quirk is needed because mxt_acquire_irq() is called before mxt_check_retrigen() is called and at this point pending IRQs need to be checked, and if the workaround is not active, all interrupts will be lost from this point. Solve this by switching the calls around. Reported-by: Andre Müller <[email protected]> Tested-by: Andre Müller <[email protected]> Suggested-by: Dmitry Torokhov <[email protected]> Fixes: 74d905d2d38a ("Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary") Signed-off-by: Linus Walleij <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-12-01fpga: Specify HAS_IOMEM dependency for FPGA_DFLDavid Gow1-0/+1
Because dfl.c uses the 'devm_ioremap', 'devm_iounmap', 'devm_ioremap_resource', and 'devm_platform_ioremap_resource' functions, it should depend on HAS_IOMEM. This fixes make allyesconfig under UML (ARCH=um), which doesn't provide HAS_IOMEM. [[email protected]: Removed "drivers: " in commit message] Fixes: 89eb35e810a8 ("fpga: dfl: map feature mmio resources in their own feature drivers") Signed-off-by: David Gow <[email protected]> Signed-off-by: Moritz Fischer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-12-01fs: 9p: add generic splice_read file operationsToke Høiland-Jørgensen1-0/+6
The v9fs file operations were missing the splice_read operations, which breaks sendfile() of files on such a filesystem. I discovered this while trying to load an eBPF program using iproute2 inside a 'virtme' environment which uses 9pfs for the virtual file system. iproute2 relies on sendfile() with an AF_ALG socket to hash files, which was erroring out in the virtual environment. Since generic_file_splice_read() seems to just implement splice_read in terms of the read_iter operation, I simply added the generic implementation to the file operations, which fixed the error I was seeing. A quick grep indicates that this is what most other file systems do as well. Link: http://lkml.kernel.org/r/[email protected] Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Dominique Martinet <[email protected]>
2020-12-01x86/resctrl: Fix AMD L3 QOS CDP enable/disableBabu Moger3-2/+14
When the AMD QoS feature CDP (code and data prioritization) is enabled or disabled, the CDP bit in MSR 0000_0C81 is written on one of the CPUs in an L3 domain (core complex). That is not correct - the CDP bit needs to be updated on all the logical CPUs in the domain. This was not spelled out clearly in the spec earlier. The specification has been updated and the updated document, "AMD64 Technology Platform Quality of Service Extensions Publication # 56375 Revision: 1.02 Issue Date: October 2020" is available now. Refer the section: Code and Data Prioritization. Fix the issue by adding a new flag arch_has_per_cpu_cfg in rdt_cache data structure. The documentation can be obtained at: https://developer.amd.com/wp-content/resources/56375.pdf Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 [ bp: Massage commit message. ] Fixes: 4d05bf71f157 ("x86/resctrl: Introduce AMD QOS feature") Signed-off-by: Babu Moger <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Link: https://lkml.kernel.org/r/160675180380.15628.3309402017215002347.stgit@bmoger-ubuntu
2020-12-01kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1Nathan Chancellor3-0/+26
ld.lld 10.0.1 spews a bunch of various warnings about .rela sections, along with a few others. Newer versions of ld.lld do not have these warnings. As a result, do not add '--orphan-handling=warn' to LDFLAGS_vmlinux if ld.lld's version is not new enough. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Link: https://github.com/ClangBuiltLinux/linux/issues/1193 Reported-by: Arvind Sankar <[email protected]> Reported-by: kernelci.org bot <[email protected]> Reported-by: Mark Brown <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-12-01kbuild: Hoist '--orphan-handling' into KconfigNathan Chancellor13-14/+30
Currently, '--orphan-handling=warn' is spread out across four different architectures in their respective Makefiles, which makes it a little unruly to deal with in case it needs to be disabled for a specific linker version (in this case, ld.lld 10.0.1). To make it easier to control this, hoist this warning into Kconfig and the main Makefile so that disabling it is simpler, as the warning will only be enabled in a couple places (main Makefile and a couple of compressed boot folders that blow away LDFLAGS_vmlinx) and making it conditional is easier due to Kconfig syntax. One small additional benefit of this is saving a call to ld-option on incremental builds because we will have already evaluated it for CONFIG_LD_ORPHAN_WARN. To keep the list of supported architectures the same, introduce CONFIG_ARCH_WANT_LD_ORPHAN_WARN, which an architecture can select to gain this automatically after all of the sections are specified and size asserted. A special thanks to Kees Cook for the help text on this config. Link: https://github.com/ClangBuiltLinux/linux/issues/1187 Acked-by: Kees Cook <[email protected]> Acked-by: Michael Ellerman <[email protected]> (powerpc) Reviewed-by: Nick Desaulniers <[email protected]> Tested-by: Nick Desaulniers <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-12-01KVM: PPC: Book3S HV: XIVE: Fix vCPU id sanity checkGreg Kurz1-5/+2
Commit 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") updated kvmppc_xive_vcpu_id_valid() in a way that allows userspace to trigger an assertion in skiboot and crash the host: [ 696.186248988,3] XIVE[ IC 08 ] eq_blk != vp_blk (0 vs. 1) for target 0x4300008c/0 [ 696.186314757,0] Assert fail: hw/xive.c:2370:0 [ 696.186342458,0] Aborting! xive-kvCPU 0043 Backtrace: S: 0000000031e2b8f0 R: 0000000030013840 .backtrace+0x48 S: 0000000031e2b990 R: 000000003001b2d0 ._abort+0x4c S: 0000000031e2ba10 R: 000000003001b34c .assert_fail+0x34 S: 0000000031e2ba90 R: 0000000030058984 .xive_eq_for_target.part.20+0xb0 S: 0000000031e2bb40 R: 0000000030059fdc .xive_setup_silent_gather+0x2c S: 0000000031e2bc20 R: 000000003005a334 .opal_xive_set_vp_info+0x124 S: 0000000031e2bd20 R: 00000000300051a4 opal_entry+0x134 --- OPAL call token: 0x8a caller R1: 0xc000001f28563850 --- XIVE maintains the interrupt context state of non-dispatched vCPUs in an internal VP structure. We allocate a bunch of those on startup to accommodate all possible vCPUs. Each VP has an id, that we derive from the vCPU id for efficiency: static inline u32 kvmppc_xive_vp(struct kvmppc_xive *xive, u32 server) { return xive->vp_base + kvmppc_pack_vcpu_id(xive->kvm, server); } The KVM XIVE device used to allocate KVM_MAX_VCPUS VPs. This was limitting the number of concurrent VMs because the VP space is limited on the HW. Since most of the time, VMs run with a lot less vCPUs, commit 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") gave the possibility for userspace to tune the size of the VP block through the KVM_DEV_XIVE_NR_SERVERS attribute. The check in kvmppc_pack_vcpu_id() was changed from cpu < KVM_MAX_VCPUS * xive->kvm->arch.emul_smt_mode to cpu < xive->nr_servers * xive->kvm->arch.emul_smt_mode The previous check was based on the fact that the VP block had KVM_MAX_VCPUS entries and that kvmppc_pack_vcpu_id() guarantees that packed vCPU ids are below KVM_MAX_VCPUS. We've changed the size of the VP block, but kvmppc_pack_vcpu_id() has nothing to do with it and it certainly doesn't ensure that the packed vCPU ids are below xive->nr_servers. kvmppc_xive_vcpu_id_valid() might thus return true when the VM was configured with a non-standard VSMT mode, even if the packed vCPU id is higher than what we expect. We end up using an unallocated VP id, which confuses OPAL. The assert in OPAL is probably abusive and should be converted to a regular error that the kernel can handle, but we shouldn't really use broken VP ids in the first place. Fix kvmppc_xive_vcpu_id_valid() so that it checks the packed vCPU id is below xive->nr_servers, which is explicitly what we want. Fixes: 062cfab7069f ("KVM: PPC: Book3S HV: XIVE: Make VP block size configurable") Cc: [email protected] # v5.5+ Signed-off-by: Greg Kurz <[email protected]> Reviewed-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-01USB: serial: option: fix Quectel BG96 matchingBjørn Mork1-3/+2
This is a partial revert of commit 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions") The Quectel BG96 is different from most other modern Quectel modems, having serial functions with 3 endpoints using ff/ff/ff and ff/fe/ff class/subclass/protocol. Including it in the change to accommodate dynamic function mapping was incorrect. Revert to interface number matching for the BG96, assuming static layout of the RMNET function on interface 4. This restores support for the serial functions on interfaces 2 and 3. Full lsusb output for the BG96: Bus 002 Device 003: ID 2c7c:0296 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2c7c idProduct 0x0296 bcdDevice 0.00 iManufacturer 3 Qualcomm, Incorporated iProduct 2 Qualcomm CDMA Technologies MSM iSerial 4 d1098243 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 145 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 1 Qualcomm Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 254 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Cc: Sebastian Sjoholm <[email protected]> Fixes: 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions") Signed-off-by: Bjørn Mork <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-11-30Input: xpad - support Ardwiino ControllersSanjay Govind1-0/+2
This commit adds support for Ardwiino Controllers Signed-off-by: Sanjay Govind <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-11-30Input: i8042 - add ByteSpeed touchpad to noloop tablePo-Hsu Lin1-0/+4
It looks like the C15B laptop got another vendor: ByteSpeed LLC. Avoid AUX loopback on this touchpad as well, thus input subsystem will be able to recognize a Synaptics touchpad in the AUX port. BugLink: https://bugs.launchpad.net/bugs/1906128 Signed-off-by: Po-Hsu Lin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2020-12-01scsi: mpt3sas: Increase IOCInit request timeout to 30sSreekanth Reddy1-1/+1
Currently the IOCInit request message timeout is set to 10s. This is not sufficient in some scenarios such as during HBA FW downgrade operations. Increase the IOCInit request timeout to 30s. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sreekanth Reddy <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-12-01scsi: mpt3sas: Fix ioctl timeoutSuganath Prabu S1-1/+1
Commit c1a6c5ac4278 ("scsi: mpt3sas: For NVME device, issue a protocol level reset") modified the ioctl path 'timeout' variable type to u8 from unsigned long, limiting the maximum timeout value that the driver can support to 255 seconds. If the management application is requesting a higher value the resulting timeout will be zero. The operation times out immediately and the ioctl request fails. Change datatype back to unsigned long. Link: https://lore.kernel.org/r/[email protected] Fixes: c1a6c5ac4278 ("scsi: mpt3sas: For NVME device, issue a protocol level reset") Cc: <[email protected]> #v4.18+ Signed-off-by: Suganath Prabu S <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-11-30scsi: storvsc: Validate length of incoming packet in ↵Andrea Parri (Microsoft)1-0/+5
storvsc_on_channel_callback() Check that the packet is of the expected size at least, don't copy data past the packet. Link: https://lore.kernel.org/r/[email protected] Cc: "James E.J. Bottomley" <[email protected]> Cc: "Martin K. Petersen" <[email protected]> Cc: [email protected] Reported-by: Saruhan Karademir <[email protected]> Signed-off-by: Andrea Parri (Microsoft) <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-11-30docs: bootconfig: Add the endianness of fieldsMasami Hiramatsu1-1/+3
Add a description about the endianness of the size and the checksum fields. Those must be stored as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583936246.547349.10964204130590955409.stgit@devnote2 Reported-by: Steven Rostedt <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30tools/bootconfig: Store size and checksum in footer as le32Masami Hiramatsu1-2/+5
Store the size and the checksum fields in the footer as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583935332.547349.5897811300636587426.stgit@devnote2 Reported-by: Steven Rostedt <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30bootconfig: Load size and checksum in the footer as le32Masami Hiramatsu1-2/+2
Load the size and the checksum fields in the footer as le32 instead of u32. This will allow us to apply bootconfig to the cross build initrd without caring the endianness. Link: https://lkml.kernel.org/r/160583934457.547349.10504070298990791074.stgit@devnote2 Reported-by: Steven Rostedt <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30ring-buffer: Always check to put back before stamp when crossing pagesSteven Rostedt (VMware)1-8/+6
The current ring buffer logic checks to see if the updating of the event buffer was interrupted, and if it is, it will try to fix up the before stamp with the write stamp to make them equal again. This logic is flawed, because if it is not interrupted, the two are guaranteed to be different, as the current event just updated the before stamp before allocation. This guarantees that the next event (this one or another interrupting one) will think it interrupted the time updates of a previous event and inject an absolute time stamp to compensate. The correct logic is to always update the timestamps when traversing to a new sub buffer. Cc: [email protected] Fixes: a389d86f7fd09 ("ring-buffer: Have nested events still record running time stamp") Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30scsi: storvsc: Fix error return in storvsc_probe()Jing Xiangfeng1-1/+3
Return -ENOMEM from the error handling case instead of 0. Link: https://lore.kernel.org/r/[email protected] Fixes: 436ad9413353 ("scsi: storvsc: Allow only one remove lun work item to be issued per lun") Reviewed-by: Michael Kelley <[email protected]> Signed-off-by: Jing Xiangfeng <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-11-30Merge tag 'linux-can-fixes-for-5.10-20201130' of ↵Jakub Kicinski5-15/+20
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-30 The first patch is by me an target the tcan4x5x bindings for the m_can driver. It fixes the error path in the tcan4x5x_can_probe() function. The next two patches are by Jeroen Hofstee and makes the lost of arbitration error counters of sja1000 and the sun4i drivers consistent with the other drivers. Zhang Qilong contributes two patch that clean up the error path in the c_can and kvaser_pciefd drivers. * tag 'linux-can-fixes-for-5.10-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: kvaser_pciefd: kvaser_pciefd_open(): fix error handling can: c_can: c_can_power_up(): fix error handling can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an error can: sja1000: sja1000_err(): don't count arbitration lose as an error can: m_can: tcan4x5x_can_probe(): fix error path: remove erroneous clk_disable_unprepare() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-30ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependencyNaveen N. Rao1-1/+1
DYNAMIC_FTRACE_WITH_DIRECT_CALLS should depend on DYNAMIC_FTRACE_WITH_REGS since we need ftrace_regs_caller(). Link: https://lkml.kernel.org/r/fc4b257ea8689a36f086d2389a9ed989496ca63a.1606412433.git.naveen.n.rao@linux.vnet.ibm.com Cc: [email protected] Fixes: 763e34e74bb7d5c ("ftrace: Add register_ftrace_direct()") Signed-off-by: Naveen N. Rao <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30ftrace: Fix updating FTRACE_FL_TRAMPNaveen N. Rao1-1/+21
On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in ftrace_get_addr_new() followed by the below message: Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001) The set of steps leading to this involved: - modprobe ftrace-direct-too - enable_probe - modprobe ftrace-direct - rmmod ftrace-direct <-- trigger The problem turned out to be that we were not updating flags in the ftrace record properly. From the above message about the trampoline accounting being bad, it can be seen that the ftrace record still has FTRACE_FL_TRAMP set though ftrace-direct module is going away. This happens because we are checking if any ftrace_ops has the FTRACE_FL_TRAMP flag set _before_ updating the filter hash. The fix for this is to look for any _other_ ftrace_ops that also needs FTRACE_FL_TRAMP. Link: https://lkml.kernel.org/r/56c113aa9c3e10c19144a36d9684c7882bf09af5.1606412433.git.naveen.n.rao@linux.vnet.ibm.com Cc: [email protected] Fixes: a124692b698b0 ("ftrace: Enable trampoline when rec count returns back to one") Signed-off-by: Naveen N. Rao <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30tracing: Fix alignment of static bufferMinchan Kim1-1/+1
With 5.9 kernel on ARM64, I found ftrace_dump output was broken but it had no problem with normal output "cat /sys/kernel/debug/tracing/trace". With investigation, it seems coping the data into temporal buffer seems to break the align binary printf expects if the static buffer is not aligned with 4-byte. IIUC, get_arg in bstr_printf expects that args has already right align to be decoded and seq_buf_bprintf says ``the arguments are saved in a 32bit word array that is defined by the format string constraints``. So if we don't keep the align under copy to temporal buffer, the output will be broken by shifting some bytes. This patch fixes it. Link: https://lkml.kernel.org/r/[email protected] Cc: <[email protected]> Fixes: 8e99cf91b99bb ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic") Signed-off-by: Namhyung Kim <[email protected]> Signed-off-by: Minchan Kim <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30tracing: Remove WARN_ON in start_thread()Vasily Averin1-1/+1
This patch reverts commit 978defee11a5 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists") .start hook can be legally called several times if according tracer is stopped screen window 1 [root@localhost ~]# echo 1 > /sys/kernel/tracing/events/kmem/kfree/enable [root@localhost ~]# echo 1 > /sys/kernel/tracing/options/pause-on-trace [root@localhost ~]# less -F /sys/kernel/tracing/trace screen window 2 [root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on 0 [root@localhost ~]# echo hwlat > /sys/kernel/debug/tracing/current_tracer [root@localhost ~]# echo 1 > /sys/kernel/debug/tracing/tracing_on [root@localhost ~]# cat /sys/kernel/debug/tracing/tracing_on 0 [root@localhost ~]# echo 2 > /sys/kernel/debug/tracing/tracing_on triggers warning in dmesg: WARNING: CPU: 3 PID: 1403 at kernel/trace/trace_hwlat.c:371 hwlat_tracer_start+0xc9/0xd0 Link: https://lkml.kernel.org/r/[email protected] Cc: Ingo Molnar <[email protected]> Cc: [email protected] Fixes: 978defee11a5 ("tracing: Do a WARN_ON() if start_thread() in hwlat is called when thread exists") Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30samples/ftrace: Mark my_tramp[12]? globalSami Tolvanen3-0/+4
my_tramp[12]? are declared as global functions in C, but they are not marked global in the inline assembly definition. This mismatch confuses Clang's Control-Flow Integrity checking. Fix the definitions by adding .globl. Link: https://lkml.kernel.org/r/[email protected] Fixes: 9d907f1ae80b8 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()") Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Sami Tolvanen <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-30vxlan: Copy needed_tailroom from lowerdevSven Eckelmann1-0/+2
While vxlan doesn't need any extra tailroom, the lowerdev might need it. In that case, copy it over to reduce the chance for additional (re)allocations in the transmit path. Signed-off-by: Sven Eckelmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-30vxlan: Add needed_headroom for lower deviceSven Eckelmann1-0/+1
It was observed that sending data via batadv over vxlan (on top of wireguard) reduced the performance massively compared to raw ethernet or batadv on raw ethernet. A check of perf data showed that the vxlan_build_skb was calling all the time pskb_expand_head to allocate enough headroom for: min_headroom = LL_RESERVED_SPACE(dst->dev) + dst->header_len + VXLAN_HLEN + iphdr_len; But the vxlan_config_apply only requested needed headroom for: lowerdev->hard_header_len + VXLAN6_HEADROOM or VXLAN_HEADROOM So it completely ignored the needed_headroom of the lower device. The first caller of net_dev_xmit could therefore never make sure that enough headroom was allocated for the rest of the transmit path. Cc: Annika Wickert <[email protected]> Signed-off-by: Sven Eckelmann <[email protected]> Tested-by: Annika Wickert <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.