aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-11-18scsi: mpt3sas: Fix system going into read-only modeSreekanth Reddy2-1/+60
While determining the SAS address of a drive, the driver checks whether the handle number is less than the HBA phy count or not. If the handle number is less than the HBA phy count then driver assumes that this handle belongs to HBA and hence it assigns the HBA SAS address. During IOC firmware downgrade operation, if the number of HBA phys is reduced and the OS drive's device handle drops below the phy count while determining the drive's SAS address, the driver ends up using the HBA's SAS address. This leads to a mismatch of drive's SAS address and hence the driver unregisters the OS drive and the system goes into read-only mode. Update the IOC's num_phys to the HBA phy count provided by actual loaded firmware. Link: https://lore.kernel.org/r/[email protected] Fixes: a5e99fda0172 ("scsi: mpt3sas: Update hba_port objects after host reset") Signed-off-by: Sreekanth Reddy <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-11-19Merge tag 'drm-intel-fixes-2021-11-18' of ↵Dave Airlie3-12/+9
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes One quick fix for return error handling, one fix for ADL-P display and one revert targeting stable 5.4, for TGL's DSI display clocks Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-11-19Merge tag 'drm-misc-fixes-2021-11-18' of ↵Dave Airlie6-4/+35
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes A infoframe corruption fix for nouveau, a wrong free function usage fix for GEM CMA helpers, a Kconfig dependency fix for sun4i, two fixes for drm/scheduler refcounting and a probing fix for efifb. Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20211118075447.5rn6zaulnrequqnm@gilmour
2021-11-18scsi: mpt3sas: Fix kernel panic during drive powercycle testSreekanth Reddy1-1/+1
While looping over shost's sdev list it is possible that one of the drives is getting removed and its sas_target object is freed but its sdev object remains intact. Consequently, a kernel panic can occur while the driver is trying to access the sas_address field of sas_target object without also checking the sas_target object for NULL. Link: https://lore.kernel.org/r/[email protected] Fixes: f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS") Signed-off-by: Sreekanth Reddy <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-11-18scsi: ufs: ufs-mediatek: Add put_device() after of_find_device_by_node()Ye Guojin1-0/+1
This was found by coccicheck: ./drivers/scsi/ufs/ufs-mediatek.c, 211, 1-7, ERROR missing put_device; call of_find_device_by_node on line 1185, but without a corresponding object release within this function. Link: https://lore.kernel.org/r/[email protected] Reported-by: Zeal Robot <[email protected]> Reviewed-by: Peter Wang <[email protected]> Signed-off-by: Ye Guojin <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-11-18scsi: scsi_debug: Fix type in min_t to avoid stack OOBGeorge Kennedy1-15/+19
Change min_t() to use type "u32" instead of type "int" to avoid stack out of bounds. With min_t() type "int" the values get sign extended and the larger value gets used causing stack out of bounds. BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707 CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1 Hardware name: Red Hat KVM, BIOS 1.13.0-2 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106 print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189 memcpy+0x23/0x60 mm/kasan/shadow.c:65 memcpy include/linux/fortify-string.h:191 [inline] sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976 sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000 fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162 fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline] resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887 schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478 scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533 scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline] scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699 blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639 __blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325 blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358 __blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761 __blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838 blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891 blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474 blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62 sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836 sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774 sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939 sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lore.kernel.org/r/[email protected] Reported-by: syzkaller <[email protected]> Acked-by: Douglas Gilbert <[email protected]> Signed-off-by: George Kennedy <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-11-18scsi: qla2xxx: edif: Fix off by one bug in qla_edif_app_getfcinfo()Dan Carpenter1-1/+1
The > comparison needs to be >= to prevent accessing one element beyond the end of the app_reply->ports[] array. Link: https://lore.kernel.org/r/20211109115219.GE16587@kili Fixes: 7878f22a2e03 ("scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs") Reviewed-by: Ewan D. Milne <[email protected]> Reviewed-by: Himanshu Madhani <[email protected]> Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-11-18scsi: ufs: ufshpb: Fix warning in ufshpb_set_hpb_read_to_upiu()Bean Huo1-1/+1
Fix the following sparse warnings in ufshpb_set_hpb_read_to_upiu(): sparse warnings: (new ones prefixed by >>) drivers/scsi/ufs/ufshpb.c:335:27: sparse: sparse: cast from restricted __be64 drivers/scsi/ufs/ufshpb.c:335:25: sparse: expected restricted __be64 [usertype] ppn_tmp drivers/scsi/ufs/ufshpb.c:335:25: sparse: got unsigned long long [usertype] Link: https://lore.kernel.org/r/[email protected] Reported-by: kernel test robot <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Bean Huo <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-11-18tracing: Don't use out-of-sync va_list in event printingNikita Yushchenko1-0/+12
If trace_seq becomes full, trace_seq_vprintf() no longer consumes arguments from va_list, making va_list out of sync with format processing by trace_check_vprintf(). This causes va_arg() in trace_check_vprintf() to return wrong positional argument, which results into a WARN_ON_ONCE() hit. ftrace_stress_test from LTP triggers this situation. Fix it by explicitly avoiding further use if va_list at the point when it's consistency can no longer be guaranteed. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Nikita Yushchenko <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-11-18tracing: Use memset_startat() to zero struct trace_iteratorKees Cook1-3/+1
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring fields. Use memset_startat() to avoid confusing memset() about writing beyond the target struct member. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-11-18Merge tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linuxLinus Torvalds4-2/+21
Pull zstd fixes from Nick Terrell: "Fix stack usage on parisc & improve code size bloat This contains three commits: 1. Fixes a minor unused variable warning reported by Kernel test robot [0]. 2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining some functions that are unlikely to be used in performance sensitive workloads. 3. Fixes the reported excess stack usage on parisc [2] by removing -O3 from zstd's compilation flags. -O3 triggered bugs in the hppa-linux-gnu gcc-8 compiler. -O2 performance is acceptable: neutral compression, about -1% decompression speed. We also reduce code bloat (-105KB / 374KB). After this our code bloat is cut from 374KB to 105KB with gcc-11. If we wanted to cut the remaining 105KB we'd likely have to trade signicant performance, so I want to say that this is enough for now. We should be able to get further gains without sacrificing speed, but that will take some significant optimization effort, and isn't suitable for a quick fix. I've opened an upstream issue [3] to track the code size, and try to avoid future regressions, and improve it in the long term" Link: https://lore.kernel.org/linux-mm/[email protected]/T/ [0] Link: https://lkml.org/lkml/2021/11/15/710 [1] Link: https://lkml.org/lkml/2021/11/14/189 [2] Link: https://github.com/facebook/zstd/issues/2867 [3] Link: https://lore.kernel.org/r/[email protected]/ Link: https://lore.kernel.org/r/[email protected]/ * tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux: lib: zstd: Don't add -O3 to cflags lib: zstd: Don't inline functions in zstd_opt.c lib: zstd: Fix unused variable warning
2021-11-18drm/nouveau/acr: fix a couple NULL vs IS_ERR() checksDan Carpenter2-4/+8
The nvkm_acr_lsfw_add() function never returns NULL. It returns error pointers on error. Fixes: 22dcda45a3d1 ("drm/nouveau/acr: implement new subdev to replace "secure boot"") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Ben Skeggs <[email protected]> Signed-off-by: Karol Herbst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20211118111314.GB1147@kili
2021-11-18drm/nouveau: recognise GA106Ben Skeggs1-0/+22
I've got HW now, appears to work as expected so far. Signed-off-by: Ben Skeggs <[email protected]> Cc: <[email protected]> # 5.14+ Reviewed-by: Karol Herbst <[email protected]> Signed-off-by: Karol Herbst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-11-18Merge tag 'thermal-5.16-rc2' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix the handling of thermal zones during system resume and disable building of the int340x thermal driver on 32-bit. Specifics: - Prevent the previous high and low thermal zone trip values from being retained over a system suspend-resume cycle (Manaf Meethalavalappu Pallikunhi) - Prevent the int340x thermal driver from being built in 32-bit kernel configurations, because running it on 32-bit is questionable (Arnd Bergmann)" * tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Reset previous low and high trip during thermal zone init thermal: int340x: Limit Kconfig to 64-bit
2021-11-18Merge tag 'pm-5.16-rc2' of ↵Linus Torvalds2-21/+41
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a system-wide suspend issue in the DTPM framework and improve the Energy Model documentation. Specifics: - Fix system suspend handling in DTPM when it is enabled, but not actually used (Daniel Lezcano) - Describe the new cpufreq callback for Energy Model registration and explain the "advanced" and "simple" EM variants in the EM documentation (Lukasz Luba)" * tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Documentation: power: Describe 'advanced' and 'simple' EM models Documentation: power: Add description about new callback for EM registration powercap: DTPM: Fix suspend failure and kernel warning
2021-11-18Merge tag 'acpi-5.16-rc2' of ↵Linus Torvalds3-32/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Revert the change attempting to release PM resources blocked by unused ACPI objects after device enumeration, because it caused boot issues to appear on multiple systems" * tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: scan: Release PM resources blocked by unused objects"
2021-11-18Merge tag 'platform-drivers-x86-v5.16-2' of ↵Linus Torvalds9-27/+25
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Various build- and bug-fixes as well as one hardware-id addition" * tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep platform/x86: thinkpad_acpi: Add support for dual fan control platform/x86: think-lmi: Abort probe on analyze failure platform/x86: dell-wmi-descriptor: disable by default platform/x86: samsung-laptop: Fix typo in a comment platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()' platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
2021-11-18Merge tag 'spi-fix-v5.16-rc1' of ↵Linus Torvalds4-16/+38
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small fixes for v5.16, one in the core for an issue with handling of controller unregistration that was introduced with the fixes for registering nested SPI controllers and a few more minor device specific ones" * tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix use-after-free of the add_lock mutex spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan() spi: lpspi: Silence error message upon deferred probe spi: cadence-quadspi: fix write completion support
2021-11-18ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCETakashi Iwai2-5/+5
When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential buffer overflow and panics. The code in sofcpga bootstrapping contains the memcpy() calls are mistakenly translated as the shorter size, hence it triggers a panic as if it were overflowing. This patch changes the secondary_trampoline and *_end definitions to arrays for avoiding the false-positive crash above. Fixes: 9c4566a117a6 ("ARM: socfpga: Enable SMP for socfpga") Suggested-by: Kees Cook <[email protected]> Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: Dinh Nguyen <[email protected]>
2021-11-18ALSA: ctxfi: Fix out-of-range accessTakashi Iwai5-26/+22
The master and next_conj of rcs_ops are used for iterating the resource list entries, and currently those are supposed to return the current value. The problem is that next_conf may go over the last entry before the loop abort condition is evaluated, and it may return the "current" value that is beyond the array size. It was caught recently as a GPF, for example. Those return values are, however, never actually evaluated, hence basically we don't have to consider the current value as the return at all. By dropping those return values, the potential out-of-range access above is also fixed automatically. This patch changes the return type of master and next_conj callbacks to void and drop the superfluous code accordingly. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214985 Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-11-18lib: zstd: Don't add -O3 to cflagsNick Terrell1-2/+0
After the update to zstd-1.4.10 passing -O3 is no longer necessary to get good performance from zstd. Using the default optimization level -O2 is sufficient to get good performance. I've measured no significant change to compression speed, and a ~1% decompression speed loss, which is acceptable. This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating stacks that are ~3KB. With -O2 these same functions generate stacks in the < 100B, completely fixing the problem. Function size deltas are listed below: ZSTD_compressBlock_fast_extDict_generic: 3800 -> 68 ZSTD_compressBlock_fast: 2216 -> 40 ZSTD_compressBlock_fast_dictMatchState: 1848 -> 64 ZSTD_compressBlock_doubleFast_extDict_generic: 3744 -> 76 ZSTD_fillDoubleHashTable: 3252 -> 0 ZSTD_compressBlock_doubleFast: 5856 -> 36 ZSTD_compressBlock_doubleFast_dictMatchState: 5380 -> 84 ZSTD_copmressBlock_lazy2: 2420 -> 72 Additionally, this improves the reported code bloat [1]. With gcc-11 bloat-o-meter shows an 80KB code size improvement: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 31/8 grow/shrink: 24/155 up/down: 25734/-107924 (-82190) Total: Before=6418562, After=6336372, chg -1.28% ``` Compared to before the zstd-1.4.10 update we see a total code size regression of 105KB, down from 374KB at v5.16-rc1: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 292/62 grow/shrink: 56/88 up/down: 235009/-127487 (107522) Total: Before=6228850, After=6336372, chg +1.73% ``` [0] https://lkml.org/lkml/2021/11/15/710 [1] https://lkml.org/lkml/2021/11/14/189 Link: https://lore.kernel.org/r/[email protected]/ Link: https://lore.kernel.org/r/[email protected]/ Reported-by: Geert Uytterhoeven <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Nick Terrell <[email protected]>
2021-11-18lib: zstd: Don't inline functions in zstd_opt.cNick Terrell2-0/+19
`zstd_opt.c` contains the match finder for the highest compression levels. These levels are already very slow, and are unlikely to be used in the kernel. If they are used, they shouldn't be used in latency sensitive workloads, so slowing them down shouldn't be a big deal. This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0]. I've also opened an issue upstream [1] so that we can properly tackle the code size issue in `zstd_opt.c` for all users, and can hopefully remove this hack in the next zstd version we import. Bloat-o-meter output on x86-64: ``` > ../scripts/bloat-o-meter vmlinux.old vmlinux add/remove: 6/5 grow/shrink: 1/9 up/down: 16673/-209939 (-193266) Function old new delta ZSTD_compressBlock_opt_generic.constprop - 7559 +7559 ZSTD_insertBtAndGetAllMatches - 6304 +6304 ZSTD_insertBt1 - 1731 +1731 ZSTD_storeSeq - 693 +693 ZSTD_BtGetAllMatches - 255 +255 ZSTD_updateRep - 128 +128 ZSTD_updateTree 96 99 +3 ZSTD_insertAndFindFirstIndexHash3 81 - -81 ZSTD_setBasePrices.constprop 98 - -98 ZSTD_litLengthPrice.constprop 138 - -138 ZSTD_count 362 181 -181 ZSTD_count_2segments 1407 938 -469 ZSTD_insertBt1.constprop 2689 - -2689 ZSTD_compressBlock_btultra2 19990 423 -19567 ZSTD_compressBlock_btultra 19633 15 -19618 ZSTD_initStats_ultra 19825 - -19825 ZSTD_compressBlock_btopt 20374 12 -20362 ZSTD_compressBlock_btopt_extDict 29984 12 -29972 ZSTD_compressBlock_btultra_extDict 30718 15 -30703 ZSTD_compressBlock_btopt_dictMatchState 32689 12 -32677 ZSTD_compressBlock_btultra_dictMatchState 33574 15 -33559 Total: Before=6611828, After=6418562, chg -2.92% ``` [0] https://lkml.org/lkml/2021/11/14/189 [1] https://github.com/facebook/zstd/issues/2862 Link: https://lore.kernel.org/r/[email protected]/ Link: https://lore.kernel.org/r/[email protected]/ Reported-by: Geert Uytterhoeven <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Nick Terrell <[email protected]>
2021-11-18lib: zstd: Fix unused variable warningNick Terrell1-0/+2
The variable `litLengthSum` is only used by an `assert()`, so when asserts are disabled the compiler doesn't see any usage and warns. This issue is already fixed upstream by PR #2838 [0]. It was reported by the Kernel test robot in [1]. Another approach would be to change zstd's disabled `assert()` definition to use the argument in a disabled branch, instead of ignoring the argument. I've avoided this approach because there are some small changes necessary to get zstd to build, and I would want to thoroughly re-test for performance, since that is slightly changing the code in every function in zstd. It seems like a trivial change, but some functions are pretty sensitive to small changes. However, I think it is a valid approach that I would like to see upstream take, so I've opened Issue #2868 to attempt this upstream. Lastly, I've chosen not to use __maybe_unused because all code in lib/zstd/ must eventually be upstreamed. Upstream zstd can't use __maybe_unused because it isn't portable across all compilers. [0] https://github.com/facebook/zstd/pull/2838 [1] https://lore.kernel.org/linux-mm/[email protected]/T/ [2] https://github.com/facebook/zstd/issues/2868 Link: https://lore.kernel.org/r/[email protected]/ Link: https://lore.kernel.org/r/[email protected]/ Reported-by: kernel test robot <[email protected]> Signed-off-by: Nick Terrell <[email protected]>
2021-11-18Merge tag 'net-5.16-rc2' of ↵Linus Torvalds102-507/+1314
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, mac80211. Current release - regressions: - devlink: don't throw an error if flash notification sent before devlink visible - page_pool: Revert "page_pool: disable dma mapping support...", turns out there are active arches who need it Current release - new code bugs: - amt: cancel delayed_work synchronously in amt_fini() Previous releases - regressions: - xsk: fix crash on double free in buffer pool - bpf: fix inner map state pruning regression causing program rejections - mac80211: drop check for DONT_REORDER in __ieee80211_select_queue, preventing mis-selecting the best effort queue - mac80211: do not access the IV when it was stripped - mac80211: fix radiotap header generation, off-by-one - nl80211: fix getting radio statistics in survey dump - e100: fix device suspend/resume Previous releases - always broken: - tcp: fix uninitialized access in skb frags array for Rx 0cp - bpf: fix toctou on read-only map's constant scalar tracking - bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs - tipc: only accept encrypted MSG_CRYPTO msgs - smc: transfer remaining wait queue entries during fallback, fix missing wake ups - udp: validate checksum in udp_read_sock() (when sockmap is used) - sched: act_mirred: drop dst for the direction from egress to ingress - virtio_net_hdr_to_skb: count transport header in UFO, prevent allowing bad skbs into the stack - nfc: reorder the logic in nfc_{un,}register_device, fix unregister - ipsec: check return value of ipv6_skip_exthdr - usb: r8152: add MAC passthrough support for more Lenovo Docks" * tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits) ptp: ocp: Fix a couple NULL vs IS_ERR() checks net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock() net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound ipv6: check return value of ipv6_skip_exthdr e100: fix device suspend/resume devlink: Don't throw an error if flash notification sent before devlink visible page_pool: Revert "page_pool: disable dma mapping support..." ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port() octeontx2-af: debugfs: don't corrupt user memory NFC: add NCI_UNREG flag to eliminate the race NFC: reorder the logic in nfc_{un,}register_device NFC: reorganize the functions in nci_request tipc: check for null after calling kmemdup i40e: Fix display error code in dmesg i40e: Fix creation of first queue by omitting it if is not power of two i40e: Fix warning message and call stack during rmmod i40e driver i40e: Fix ping is lost after configuring ADq on VF i40e: Fix changing previously set num_queue_pairs for PFs i40e: Fix NULL ptr dereference on VSI filter sync i40e: Fix correct max_pkt_size on VF RX queue ...
2021-11-18Merge tag 'for-5.16-rc1-tag' of ↵Linus Torvalds6-9/+58
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Several xes and one old ioctl deprecation. Namely there's fix for crashes/warnings with lzo compression that was suspected to be caused by first pull merge resolution, but it was a different bug. Summary: - regression fix for a crash in lzo due to missing boundary checks of the page array - fix crashes on ARM64 due to missing barriers when synchronizing status bits between work queues - silence lockdep when reading chunk tree during mount - fix false positive warning in integrity checker on devices with disabled write caching - fix signedness of bitfields in scrub - start deprecation of balance v1 ioctl" * tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: deprecate BTRFS_IOC_BALANCE ioctl btrfs: make 1-bit bit-fields of scrub_page unsigned int btrfs: check-integrity: fix a warning on write caching disabled disk btrfs: silence lockdep when reading chunk tree during mount btrfs: fix memory ordering between normal and ordered work functions btrfs: fix a out-of-bound access in copy_compressed_data_to_page()
2021-11-18Merge tag 'fs_for_v5.16-rc2' of ↵Linus Torvalds3-2/+35
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF fix from Jan Kara: "A fix for a long-standing UDF bug where we were not properly validating directory position inside readdir" * tag 'fs_for_v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Fix crash after seekdir
2021-11-18Merge tag 'fs.idmapped.v5.16-rc2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull setattr idmapping fix from Christian Brauner: "This contains a simple fix for setattr. When determining the validity of the attributes the ia_{g,u}id fields contain the value that will be written to inode->i_{g,u}id. When the {g,u}id attribute of the file isn't altered and the caller's fs{g,u}id matches the current {g,u}id attribute the attribute change is allowed. The value in ia_{g,u}id does already account for idmapped mounts and will have taken the relevant idmapping into account. So in order to verify that the {g,u}id attribute isn't changed we simple need to compare the ia_{g,u}id value against the inode's i_{g,u}id value. This only has any meaning for idmapped mounts as idmapping helpers are idempotent without them. And for idmapped mounts this really only has a meaning when circular idmappings are used, i.e. mappings where e.g. id 1000 is mapped to id 1001 and id 1001 is mapped to id 1000. Such ciruclar mappings can e.g. be useful when sharing the same home directory between multiple users at the same time. Before this patch we could end up denying legitimate attribute changes and allowing invalid attribute changes when circular mappings are used. To even get into this situation the caller must've been privileged both to create that mapping and to create that idmapped mount. This hasn't been seen in the wild anywhere but came up when expanding the fstest suite during work on a series of hardening patches. All idmapped fstests pass without any regressions and we're adding new tests to verify the behavior of circular mappings. The new tests can be found at [1]" Link: https://lore.kernel.org/linux-fsdevel/[email protected] [1] * tag 'fs.idmapped.v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: fs: handle circular mappings correctly
2021-11-18Merge tag 'for-5.16/parisc-4' of ↵Linus Torvalds8-34/+42
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "parisc bug and warning fixes and wire up futex_waitv. Fix some warnings which showed up with allmodconfig builds, a revert of a change to the sigreturn trampoline which broke signal handling, wire up futex_waitv and add CONFIG_PRINTK_TIME=y to 32bit defconfig" * tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable CONFIG_PRINTK_TIME=y in 32bit defconfig Revert "parisc: Reduce sigreturn trampoline to 3 instructions" parisc: Wrap assembler related defines inside __ASSEMBLY__ parisc: Wire up futex_waitv parisc: Include stringify.h to avoid build error in crypto/api.c parisc/sticon: fix reverse colors
2021-11-18mm: Add functions to zero portions of a folioMatthew Wilcox (Oracle)2-5/+41
These functions are wrappers around zero_user_segments(), which means that zero_user_segments() can now be called for compound pages even when CONFIG_TRANSPARENT_HUGEPAGE is disabled. Use 'xend' as the name of the parameter to indicate that this is an excluded end, not the more usual included end. Excluding the end makes more sense to the callers, but can cause confusion to readers who are more used to seeing included ends. Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]>
2021-11-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds34-407/+461
Pull KVM fixes from Paolo Bonzini: "Selftest changes: - Cleanups for the perf test infrastructure and mapping hugepages - Avoid contention on mmap_sem when the guests start to run - Add event channel upcall support to xen_shinfo_test x86 changes: - Fixes for Xen emulation - Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache - Fixes for migration of 32-bit nested guests on 64-bit hypervisor - Compilation fixes - More SEV cleanups Generic: - Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS and num_online_cpus(). Most architectures were only using one of the two" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus() KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus() KVM: x86: Assume a 64-bit hypercall for guests with protected state selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore riscv: kvm: fix non-kernel-doc comment block KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror() KVM: SEV: Drop a redundant setting of sev->asid during initialization KVM: SEV: WARN if SEV-ES is marked active but SEV is not KVM: SEV: Set sev_info.active after initial checks in sev_guest_init() KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache KVM: nVMX: Use a gfn_to_hva_cache for vmptrld KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check KVM: x86/xen: Use sizeof_field() instead of open-coding it KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12 KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO ...
2021-11-18Merge branch 'thermal-int340x'Rafael J. Wysocki1-2/+2
Merge int340x thermal driver Kconfig fix for 5.16-rc2. * thermal-int340x: thermal: int340x: Limit Kconfig to 64-bit
2021-11-18Merge branch 'powercap'Rafael J. Wysocki1-6/+3
Merge a Dynamic Thermal Power Management (DTPM) framework fix for 5.16-rc2. * powercap: powercap: DTPM: Fix suspend failure and kernel warning
2021-11-18Merge tag 'docs-5.16-2' of git://git.lwn.net/linuxLinus Torvalds13-78/+65
Pull documentation fixes from Jonathan Corbet: "A handful of documentation fixes for 5.16" * tag 'docs-5.16-2' of git://git.lwn.net/linux: Documentation/process: fix a cross reference Documentation: update vcpu-requests.rst reference docs: accounting: update delay-accounting.rst reference libbpf: update index.rst reference docs: filesystems: Fix grammatical error "with" to "which" doc/zh_CN: fix a translation error in management-style docs: ftrace: fix the wrong path of tracefs Documentation: arm: marvell: Fix link to armada_1000_pb.pdf document Documentation: arm: marvell: Put Armada XP section between Armada 370 and 375 Documentation: arm: marvell: Add some links to homepage / product infos docs: Update Sphinx requirements
2021-11-18tracing/histogram: Fix UAF in destroy_hist_field()Kalesh Singh1-19/+22
Calling destroy_hist_field() on an expression will recursively free any operands associated with the expression. If during expression parsing the operands of the expression are already set when an error is encountered, there is no need to explicity free the operands. Doing so will result in destroy_hist_field() being called twice for the operands and lead to a use-after-free (UAF) error. If the operands are associated with the expression, only call destroy_hist_field() on the expression since the operands will be recursively freed. Link: https://lore.kernel.org/all/CAHk-=wgcrEbFgkw9720H3tW-AhHOoEKhYwZinYJw4FpzSaJ6_Q@mail.gmail.com/ Link: https://lkml.kernel.org/r/[email protected] Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Kalesh Singh <[email protected]> Fixes: 8b5d46fd7a38 ("tracing/histogram: Optimize division by constants") Reported-by: kernel test robot <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-11-18Merge tag 'printk-for-5.16-fixup' of ↵Linus Torvalds5-1/+21
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixes from Petr Mladek: - Try to flush backtraces from other CPUs also on the local one. This was a regression caused by printk_safe buffers removal. - Remove header dependency warning. * tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Remove printk.h inclusion in percpu.h printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
2021-11-18Merge tag 'asoc-fix-v5.16-rc1' of ↵Takashi Iwai29-75/+519
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v5.16 A relatively large collection of fixes that came in since the merge window, though a lot of this is just a collection of new machine quirks for x86 platforms.
2021-11-18ftrace/samples: add s390 support for ftrace direct multi sampleHeiko Carstens2-0/+31
Add s390 architecture support for the ftrace direct multi sample. See commit 5fae941b9a6f ("ftrace/samples: Add multi direct interface test module") for further details. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Carstens <[email protected]>
2021-11-18ftrace/samples: add missing Kconfig option for ftrace direct multi sampleHeiko Carstens4-4/+13
Currently it is not possible to build the ftrace direct multi example anymore due to broken config dependencies. Fix this by adding SAMPLE_FTRACE_DIRECT_MULTI config option. This broke when merging s390-5.16-1 due to an incorrect merge conflict resolution proposed by me. Also rename SAMPLE_FTRACE_MULTI_DIRECT to SAMPLE_FTRACE_DIRECT_MULTI so it matches the module name. Fixes: 0b707e572a19 ("Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux") Acked-by: Steven Rostedt (VMware) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Carstens <[email protected]>
2021-11-18MAINTAINERS: update email address of Christian BorntraegerChristian Borntraeger2-2/+5
My [email protected] email is just a forwarder to the linux.ibm.com address. Let us remove the extra hop to avoid a potential source of errors. While at it, add the relevant email addresses to mailmap. Signed-off-by: Christian Borntraeger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Carstens <[email protected]>
2021-11-18s390/kexec: fix memory leak of ipl report bufferBaoquan He2-0/+16
unreferenced object 0x38000195000 (size 4096): comm "kexec", pid 8548, jiffies 4294953647 (age 32443.270s) hex dump (first 32 bytes): 00 00 00 c8 20 00 00 00 00 00 00 c0 02 80 00 00 .... ........... 40 40 40 40 40 40 40 40 00 00 00 00 00 00 00 00 @@@@@@@@........ backtrace: [<0000000011a2f199>] __vmalloc_node_range+0xc0/0x140 [<0000000081fa2752>] vzalloc+0x5a/0x70 [<0000000063a4c92d>] ipl_report_finish+0x2c/0x180 [<00000000553304da>] kexec_file_add_ipl_report+0xf4/0x150 [<00000000862d033f>] kexec_file_add_components+0x124/0x160 [<000000000d2717bb>] arch_kexec_kernel_image_load+0x62/0x90 [<000000002e0373b6>] kimage_file_alloc_init+0x1aa/0x2e0 [<0000000060f2d14f>] __do_sys_kexec_file_load+0x17c/0x2c0 [<000000008c86fe5a>] __s390x_sys_kexec_file_load+0x40/0x50 [<000000001fdb9dac>] __do_syscall+0x1bc/0x1f0 [<000000003ee4258d>] system_call+0x78/0xa0 Signed-off-by: Baoquan He <[email protected]> Reviewed-by: Philipp Rudo <[email protected]> Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel") Cc: <[email protected]> # v5.2: 20c76e242e70: s390/kexec: fix return code handling Cc: <[email protected]> # v5.2 Link: https://lore.kernel.org/r/20211116033101.GD21646@MiWiFi-R3L-srv Signed-off-by: Heiko Carstens <[email protected]>
2021-11-18s390/kexec: fix return code handlingHeiko Carstens2-2/+9
kexec_file_add_ipl_report ignores that ipl_report_finish may fail and can return an error pointer instead of a valid pointer. Fix this and simplify by returning NULL in case of an error and let the only caller handle this case. Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel") Signed-off-by: Heiko Carstens <[email protected]>
2021-11-18s390/dump: fix copying to user-space of swapped kdump oldmemAlexander Egorenkov1-2/+2
This commit fixes a bug introduced by commit e9e7870f90e3 ("s390/dump: introduce boot data 'oldmem_data'"). OLDMEM_BASE was mistakenly replaced by oldmem_data.size instead of oldmem_data.start. This bug caused the following error during kdump: kdump.sh[878]: No program header covering vaddr 0x3434f5245found kexec bug? Fixes: e9e7870f90e3 ("s390/dump: introduce boot data 'oldmem_data'") Cc: [email protected] # 5.15+ Signed-off-by: Alexander Egorenkov <[email protected]> Reviewed-by: Marc Hartmayer <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2021-11-18perf evsel: Fix memory leaks relating to unitIan Rogers4-18/+22
unit may have a strdup pointer or be to a literal, consequently memory assocciated with it isn't freed. Change it so the unit is always strdup and so the memory can be safely freed. Fix related issue in perf_event__process_event_update() for name and own_cpus. Leaks were spotted by leak sanitizer. Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-18perf report: Fix memory leaks around perf_tip()Ian Rogers3-14/+17
perf_tip() may allocate memory or use a literal, this means memory wasn't freed if allocated. Change the API so that literals aren't used. At the same time add missing frees for system_path. These issues were spotted using leak sanitizer. Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-18perf hist: Fix memory leak of a perf_hpp_fmtIan Rogers2-15/+14
perf_hpp__column_unregister() removes an entry from a list but doesn't free the memory causing a memory leak spotted by leak sanitizer. Add the free while at the same time reducing the scope of the function to static. Signed-off-by: Ian Rogers <[email protected]> Reviewed-by: Kajol Jain <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-18tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv ↵Arnaldo Carvalho de Melo1-0/+1
syscall To pick the changes in these csets: b3ff2881ba18b852 ("MIPS: syscalls: Wire up futex_waitv syscall") That add support for this new syscall in tools such as 'perf trace'. For instance, this is now possible (adapted from the x86_64 test output): # perf trace -e futex_waitv ^C# # perf trace -v -e futex_waitv event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449) ^C# # perf trace -v -e futex* --max-events 10 event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 202 || id == 449) mmap size 528384B ? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out) 0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0 0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ... 0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1 0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1 0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0 0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0 0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ... # That is the filter expression attached to the raw_syscalls:sys_{enter,exit} tracepoints. $ grep futex_waitv tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl 449 n64 futex_waitv sys_futex_waitv $ This addresses these perf build warnings: Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl' diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl Cc: Thomas Bogendoerfer <[email protected]> Cc: Wang Haojun <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-18tools build: Fix removal of feature-sync-compare-and-swap feature detectionArnaldo Carvalho de Melo1-1/+0
The patch removing the feature-sync-compare-and-swap feature detection didn't remove the call to main_test_sync_compare_and_swap(), making the 'test-all' case fail an all the feature tests to be performed individually: $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:18: test-libpython-version.c:5:10: error: #error 5 | #error | ^~~~~ test-all.c: In function ‘main’: test-all.c:203:9: error: implicit declaration of function ‘main_test_sync_compare_and_swap’ [-Werror=implicit-function-declaration] 203 | main_test_sync_compare_and_swap(argc, argv); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors $ Fix it, now to figure out what is that test-libpython-version.c problem... Fixes: 60fa754b2a5a4e0c ("tools: Remove feature-sync-compare-and-swap feature detection") Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Mike Leach <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-18perf inject: Fix ARM SPE handlingGerman Gomez1-0/+15
'perf inject' is currently not working for Arm SPE. When you try to run 'perf inject' and 'perf report' with a perf.data file that contains SPE traces, the tool reports a "Bad address" error: # ./perf record -e arm_spe_0/ts_enable=1,store_filter=1,branch_filter=1,load_filter=1/ -a -- sleep 1 # ./perf inject -i perf.data -o perf.inject.data --itrace # ./perf report -i perf.inject.data --stdio 0x42c00 [0x8]: failed to process type: 9 [Bad address] Error: failed to process sample As far as I know, the issue was first spotted in [1], but 'perf inject' was not yet injecting the samples. This patch does something similar to what cs_etm does for injecting the samples [2], but for SPE. [1] https://patchwork.kernel.org/project/linux-arm-kernel/cover/[email protected]/#24117339 [2] https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/cs-etm.c?h=perf/core&id=133fe2e617e48ca0948983329f43877064ffda3e#n1196 Reviewed-by: James Clark <[email protected]> Signed-off-by: German Gomez <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-18perf bench: Fix two memory leaks detected with ASanSohaib Mohamed1-0/+4
ASan reports memory leaks while running: $ perf bench sched all Fixes: e27454cc6352c422 ("perf bench: Add sched-messaging.c: Benchmark for scheduler and IPC mechanisms based on hackbench") Signed-off-by: Sohaib Mohamed <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Hitoshi Mitake <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Russel <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Pierre Gondois <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2021-11-18perf test sample-parsing: Fix branch_stack entry endianness checkThomas Richter1-1/+1
Commit 10269a2ca2b08cbd ("perf test sample-parsing: Add endian test for struct branch_flags") broke the test case 27 (Sample parsing) on s390 on linux-next tree: # perf test -Fv 27 27: Sample parsing --- start --- parsing failed for sample_type 0x800 ---- end ---- Sample parsing: FAILED! # The cause of the failure is a wrong #define BS_EXPECTED_BE statement in above commit. Correct this define and the test case runs fine. Output After: # perf test -Fv 27 27: Sample parsing : --- start --- ---- end ---- Sample parsing: Ok # Fixes: 10269a2ca2b08c ("perf test sample-parsing: Add endian test for struct branch_flags") Signed-off-by: Thomas Richter <[email protected]> Tested-by: Madhavan Srinivasan <[email protected]> Acked-by: Madhavan Srinivasan <[email protected]> CC: Sven Schnelle <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Vasily Gorbik <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.