| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Possible recursive locking is detected by lockdep when SMC
falls back to TCP. The corresponding warnings are as follows:
============================================
WARNING: possible recursive locking detected
5.16.0-rc1+ #18 Tainted: G E
--------------------------------------------
wrk/1391 is trying to acquire lock:
ffff975246c8e7d8 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0x109/0x250 [smc]
but task is already holding lock:
ffff975246c8f918 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0xfe/0x250 [smc]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ei->socket.wq.wait);
lock(&ei->socket.wq.wait);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by wrk/1391:
#0: ffff975246040130 (sk_lock-AF_SMC){+.+.}-{0:0}, at: smc_connect+0x43/0x150 [smc]
#1: ffff975246c8f918 (&ei->socket.wq.wait){..-.}-{3:3}, at: smc_switch_to_fallback+0xfe/0x250 [smc]
stack backtrace:
Call Trace:
<TASK>
dump_stack_lvl+0x56/0x7b
__lock_acquire+0x951/0x11f0
lock_acquire+0x27a/0x320
? smc_switch_to_fallback+0x109/0x250 [smc]
? smc_switch_to_fallback+0xfe/0x250 [smc]
_raw_spin_lock_irq+0x3b/0x80
? smc_switch_to_fallback+0x109/0x250 [smc]
smc_switch_to_fallback+0x109/0x250 [smc]
smc_connect_fallback+0xe/0x30 [smc]
__smc_connect+0xcf/0x1090 [smc]
? mark_held_locks+0x61/0x80
? __local_bh_enable_ip+0x77/0xe0
? lockdep_hardirqs_on+0xbf/0x130
? smc_connect+0x12a/0x150 [smc]
smc_connect+0x12a/0x150 [smc]
__sys_connect+0x8a/0xc0
? syscall_enter_from_user_mode+0x20/0x70
__x64_sys_connect+0x16/0x20
do_syscall_64+0x34/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The nested locking in smc_switch_to_fallback() is considered to
possibly cause a deadlock because smc_wait->lock and clc_wait->lock
are the same type of lock. But actually it is safe so far since
there is no other place trying to obtain smc_wait->lock when
clc_wait->lock is held. So the patch replaces spin_lock() with
spin_lock_nested() to avoid false report by lockdep.
Link: https://lkml.org/lkml/2021/11/19/962
Fixes: 2153bd1e3d3d ("Transfer remaining wait queue entries during fallback")
Reported-by: [email protected]
Signed-off-by: Wen Gu <[email protected]>
Acked-by: Tony Lu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It turns out that vhost vsock violates the virtio spec
by supplying the out buffer length in the used length
(should just be the in length).
As a result, attempts to validate the used length fail with:
vmw_vsock_virtio_transport virtio1: tx: used len 44 is larger than in buflen 0
Since vsock driver does not use the length fox tx and
validates the length before use for rx, it is safe to
suppress the validation in virtio core for this driver.
Reported-by: Halil Pasic <[email protected]>
Fixes: 939779f5152d ("virtio_ring: validate used buffer length")
Cc: "Jason Wang" <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Function axspi_read_status calls:
ret = spi_write_then_read(ax_spi->spi, ax_spi->cmd_buf, 1,
(u8 *)&status, 3);
status is a pointer to a struct spi_status, which is 3-byte wide:
struct spi_status {
u16 isr;
u8 status;
};
But &status is the pointer to this pointer, and spi_write_then_read does
not dereference this parameter:
int spi_write_then_read(struct spi_device *spi,
const void *txbuf, unsigned n_tx,
void *rxbuf, unsigned n_rx)
Therefore axspi_read_status currently receive a SPI response in the
pointer status, which overwrites 24 bits of the pointer.
Thankfully, on Little-Endian systems, the pointer is only used in
le16_to_cpus(&status->isr);
... which is a no-operation. So there, the overwritten pointer is not
dereferenced. Nevertheless on Big-Endian systems, this can lead to
dereferencing pointers after their 24 most significant bits were
overwritten. And in all systems this leads to possible use of
uninitialized value in functions calling spi_write_then_read which
expect status to be initialized when the function returns.
Moreover function axspi_read_status (and macro AX_READ_STATUS) do not
seem to be used anywhere. So currently this seems to be dead code. Fix
the issue anyway so that future code works properly when using function
axspi_read_status.
Fixes: a97c69ba4f30 ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver")
Signed-off-by: Nicolas Iooss <[email protected]>
Acked-by: Łukasz Stelmach <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently, when user space emits SIOCSHWTSTAMP ioctl calls such as
enabling/disabling timestamping or changing filter settings, the driver
reads the current CLOCK_REALTIME value and programming this into the
NIC's hardware clock. This might be necessary during system
initialization, but at runtime, when the PTP clock has already been
synchronized to a grandmaster, a reset of the timestamp settings might
result in a clock jump. Furthermore, if the clock is also controlled by
phc2sys in automatic mode (where the UTC offset is queried from ptp4l),
that UTC-to-TAI offset (currently 37 seconds in 2021) would be
temporarily reset to 0, and it would take a long time for phc2sys to
readjust so that CLOCK_REALTIME and the PHC are apart by 37 seconds
again.
To address the issue, we introduce a new function called
stmmac_init_tstamp_counter(), which gets called during ndo_open().
It contains the code snippet moved from stmmac_hwtstamp_set() that
manages the time synchronization. Besides, the sub second increment
configuration is also moved here since the related values are hardware
dependent and runtime invariant.
Furthermore, the hardware clock must be kept running even when no time
stamping mode is selected in order to retain the synchronized time base.
That way, timestamping can be enabled again at any time only with the
need to compensate the clock's natural drifting.
As a side effect, this patch fixes the issue that ptp_clock_info::enable
can be called before SIOCSHWTSTAMP and the driver (which looks at
priv->systime_flags) was not prepared to handle that ordering.
Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver")
Reported-by: Michael Olbrich <[email protected]>
Signed-off-by: Ahmad Fatoum <[email protected]>
Signed-off-by: Holger Assmann <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add entry to MAINTAINERS for Milbeaut that supported minimal drivers.
Signed-off-by: Sugaya Taichi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Use nn->tlv_caps.me_freq_mhz instead of nn->me_freq_mhz to check whether
rx-usecs/tx-usecs is valid.
This is because nn->tlv_caps.me_freq_mhz represents the clock_freq (MHz) of
the flow processing cores (FPC) on the NIC. While nn->me_freq_mhz is not
be set.
Fixes: ce991ab6662a ("nfp: read ME frequency from vNIC ctrl memory")
Signed-off-by: Diana Wang <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We deal with IPv6 packets, so we need to use IP6CB(skb)->flags and
IP6SKB_REROUTED, instead of IPCB(skb)->flags and IPSKB_REROUTED
Found by code inspection, please double check that fixing this bug
does not surface other bugs.
Fixes: 09ee9dba9611 ("ipv6: Reinject IPv6 packets if IPsec policy matches after SNAT")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Tobias Brunner <[email protected]>
Cc: Steffen Klassert <[email protected]>
Cc: David Ahern <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Tested-by: Tobias Brunner <[email protected]>
Acked-by: Tobias Brunner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
old tc(iproute2-5.9.0) output:
action order 1: bpf action.o:[action-ok] id 60 tag bcf7977d3b93787c jited default-action pipe
newer tc(iproute2-5.14.0) output:
action order 1: bpf action.o:[action-ok] id 64 name tag bcf7977d3b93787c jited default-action pipe
It can fix below errors:
# ok 260 f84a - Add cBPF action with invalid bytecode
# not ok 261 e939 - Add eBPF action with valid object-file
# Could not match regex pattern. Verify command output:
# total acts 0
#
# action order 1: bpf action.o:[action-ok] id 42 name tag bcf7977d3b93787c jited default-action pipe
# index 667 ref 1 bind 0
Signed-off-by: Li Zhijian <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We should not always presume all kernels use pfifo_fast as the default qdisc.
For example, a fq_codel qdisk could have below output:
qdisc fq_codel 0: parent 1:4 limit 10240p flows 1024 quantum 1514 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64
Reported-by: kernel test robot <[email protected]>
Suggested-by: Peilin Ye <[email protected]>
Signed-off-by: Li Zhijian <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
qca8k has a global MTU, so its tracking the MTU per port to make sure
that the largest MTU gets applied.
Since it uses the frame size instead of MTU the driver MTU change function
will then add the size of Ethernet header and checksum on top of MTU.
The driver currently populates the per port MTU size as Ethernet frame
length + checksum which equals 1518.
The issue is that then MTU change function will go through all of the
ports, find the largest MTU and apply the Ethernet header + checksum on
top of it again, so for a desired MTU of 1500 you will end up with 1536.
This is obviously incorrect, so to correct it populate the per port struct
MTU with just the MTU and not include the Ethernet header + checksum size
as those will be added by the MTU change function.
Fixes: f58d2598cf70 ("net: dsa: qca8k: implement the port MTU callbacks")
Signed-off-by: Robert Marko <[email protected]>
Signed-off-by: Ansuel Smith <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
With SGMII phy the internal delay is always applied to the PAD0 config.
This is caused by the falling edge configuration that hardcode the reg
to PAD0 (as the falling edge bits are present only in PAD0 reg)
Move the delay configuration before the reg overwrite to correctly apply
the delay.
Fixes: cef08115846e ("net: dsa: qca8k: set internal delay also for sgmii")
Signed-off-by: Ansuel Smith <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The ARCH_FEATURES function ID is a 32-bit SMC call, which returns
a 32-bit result per the SMCCC spec. Current code is doing a 64-bit
comparison against -1 (SMCCC_RET_NOT_SUPPORTED) to detect that the
feature is unimplemented. That check doesn't work in a Hyper-V VM,
where the upper 32-bits are zero as allowed by the spec.
Cast the result as an 'int' so the comparison works. The change also
makes the code consistent with other similar checks in this file.
Fixes: 821b67fa4639 ("firmware: smccc: Add ARCH_SOC_ID support")
Signed-off-by: Michael Kelley <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes
SoCFPGA fix for v5.16
- Fix crash when CONFIG_FORTIRY_SOURCE is enabled
* tag 'socfpga_fix_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v5.16
Couple of fixes for sparse warnings(type error assignment in voltage and
sensor protocols), add proper propagation of error from scmi_pm_domain_probe
handling agent discovery response in base protocol correctly and a fix
to avoid null pointer de-reference in the error path.
* tag 'scmi-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix type error assignment in voltage protocol
firmware: arm_scmi: Fix type error in sensor protocol
firmware: arm_scmi: pm: Propagate return value to caller
firmware: arm_scmi: Fix base agent discover response
firmware: arm_scmi: Fix null de-reference on error path
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Fix possible NULL pointer dereference in OP-TEE driver
* tag 'optee-fix-for-v5.16' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: fix kfree NULL pointer
Link: https://lore.kernel.org/r/20211117125747.GA2896197@jade
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.16, please pull the following:
- Florian fixes the BCM5310x DTS include file to have the appropriate
I2C controller interrupt line, and allows the BCMA GPIO controller to
be used as an interrupt controller. Finally, the BCM2711 (Raspberry Pi
4) PCIe Device Tree node interrupts are fixed to list the correct
interrupt output as well as the INTB/C/D lines.
* tag 'arm-soc/for-5.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: Fix PCIe interrupts
ARM: dts: BCM5301X: Add interrupt properties to GPIO node
ARM: dts: BCM5301X: Fix I2C controller interrupt
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add the following Telit LE910S1 composition:
0x9200: tty
Signed-off-by: Daniele Palmas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
This reverts commit 279917e27edc293eb645a25428c6ab3f3bca3f86.
With the CONFIG_HARDENED_USERCOPY option enabled, this patch triggers
kernel bugs at runtime:
usercopy: Kernel memory overwrite attempt detected to kernel text (offset 2084839, size 6)!
kernel BUG at mm/usercopy.c:99!
Backtrace:
IAOQ[0]: usercopy_abort+0xc4/0xe8
[<00000000406ed1c8>] __check_object_size+0x174/0x238
[<00000000407086d4>] copy_strings.isra.0+0x3e8/0x708
[<0000000040709a20>] do_execveat_common.isra.0+0x1bc/0x328
[<000000004070b760>] compat_sys_execve+0x7c/0xb8
[<0000000040303eb8>] syscall_exit+0x0/0x14
The problem is, that we have an init section of at least 2MB size which
starts at _stext and is freed after bootup.
If then later some kernel data is (temporarily) stored in this free
memory, check_kernel_text_object() will trigger a bug since the data
appears to be inside the kernel text (>=_stext) area:
if (overlaps(ptr, len, _stext, _etext))
usercopy_abort("kernel text");
Signed-off-by: Helge Deller <[email protected]>
Cc: [email protected] # 5.4+
|
|
Convert the PTE lookup functions to use the safer extru_safe macro.
Signed-off-by: Helge Deller <[email protected]>
|
|
The extru instruction leaves the most significant 32 bits of the target
register in an undefined state on PA 2.0 systems. If any of these bits
are nonzero, this will break the calculation of the lock pointer.
Fix by using extrd,u instruction via extru_safe macro on 64-bit kernels.
Signed-off-by: John David Anglin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The extru instruction leaves the most significant 32 bits of the
target register in an undefined state on PA 2.0 systems.
Provide a macro to safely use extru on 32- and 64-bit machines.
Suggested-by: John David Anglin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
PA-RISC uses a much bigger frame size for functions than other
architectures. So increase it to 2048 for 32- and 64-bit kernels.
This fixes e.g. a warning in lib/xxhash.c.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
Before commit 740499c78408 ("iomap: fix the iomap_readpage_actor return
value for inline data"), when hitting an IOMAP_INLINE extent,
iomap_readpage_actor would report having read the entire page. Since
then, it only reports having read the inline data (iomap->length).
This will force iomap_readpage into another iteration, and the
filesystem will report an unaligned hole after the IOMAP_INLINE extent.
But iomap_readpage_actor (now iomap_readpage_iter) isn't prepared to
deal with unaligned extents, it will get things wrong on filesystems
with a block size smaller than the page size, and we'll eventually run
into the following warning in iomap_iter_advance:
WARN_ON_ONCE(iter->processed > iomap_length(iter));
Fix that by changing iomap_readpage_iter to return 0 when hitting an
inline extent; this will cause iomap_iter to stop immediately.
To fix readahead as well, change iomap_readahead_iter to pass on
iomap_readpage_iter return values less than or equal to zero.
Fixes: 740499c78408 ("iomap: fix the iomap_readpage_actor return value for inline data")
Cc: [email protected] # v5.15+
Signed-off-by: Andreas Gruenbacher <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Move the command line preparation and the early command line parsing
earlier so that the command line parameters which affect
early_reserve_memory(), e.g. efi=nosftreserve, are taken into
account. This was broken when the invocation of
early_reserve_memory() was moved recently.
- Use an atomic type for the SGX page accounting, which is read and
written locklessly, to plug various race conditions related to it.
* tag 'x86-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Fix free page accounting
x86/boot: Pull up cmdline preparation and early param parsing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fixes from Thomas Gleixner:
- Remove unneded PEBS disabling when taking LBR snapshots to prevent an
unchecked MSR access error.
- Fix IIO event constraints for Snowridge and Skylake server chips.
* tag 'perf-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/perf: Fix snapshot_branch_stack warning in VM
perf/x86/intel/uncore: Fix IIO event constraints for Snowridge
perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
- Fix a bug in copying of sigset_t for 32-bit systems, which caused X
to not start.
- Fix handling of shared LSIs (rare) with the xive interrupt controller
(Power9/10).
- Fix missing TOC setup in some KVM code, which could result in oopses
depending on kernel data layout.
- Fix DMA mapping when we have persistent memory and only one DMA
window available.
- Fix further problems with STRICT_KERNEL_RWX on 8xx, exposed by a
recent fix.
- A couple of other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Cédric Le Goater,
Christian Zigotzky, Christophe Leroy, Daniel Axtens, Finn Thain, Greg
Kurz, Masahiro Yamada, Nicholas Piggin, and Uwe Kleine-König.
* tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/xive: Change IRQ domain to a tree domain
powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX
powerpc/signal32: Fix sigset_t copy
powerpc/book3e: Fix TLBCAM preset at boot
powerpc/pseries/ddw: Do not try direct mapping with persistent memory and one window
powerpc/pseries/ddw: simplify enable_ddw()
powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory"
powerpc/pseries: Fix numa FORM2 parsing fallback code
powerpc/pseries: rename numa_dist_table to form2_distances
powerpc: clean vdso32 and vdso64 directories
powerpc/83xx/mpc8349emitx: Drop unused variable
KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()
|
|
On 32-bit:
fs/pstore/blk.c: In function ‘__best_effort_init’:
include/linux/kern_levels.h:5:18: warning: format ‘%zu’ expects argument of type ‘size_t’, but argument 3 has type ‘long unsigned int’ [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
include/linux/kern_levels.h:14:19: note: in expansion of macro ‘KERN_SOH’
14 | #define KERN_INFO KERN_SOH "6" /* informational */
| ^~~~~~~~
include/linux/printk.h:373:9: note: in expansion of macro ‘KERN_INFO’
373 | printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~~
fs/pstore/blk.c:314:3: note: in expansion of macro ‘pr_info’
314 | pr_info("attached %s (%zu) (no dedicated panic_write!)\n",
| ^~~~~~~
Cc: [email protected]
Fixes: 7bb9557b48fcabaa ("pstore/blk: Use the normal block device I/O path")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Jens Axboe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Merge misc fixes from Andrew Morton:
"15 patches.
Subsystems affected by this patch series: ipc, hexagon, mm (swap,
slab-generic, kmemleak, hugetlb, kasan, damon, and highmem), and proc"
* emailed patches from Andrew Morton <[email protected]>:
proc/vmcore: fix clearing user buffer by properly using clear_user()
kmap_local: don't assume kmap PTEs are linear arrays in memory
mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
kasan: test: silence intentional read overflow warnings
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
hugetlb: fix hugetlb cgroup refcounting during mremap
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
hexagon: ignore vmlinux.lds
hexagon: clean up timer-regs.h
hexagon: export raw I/O routines for modules
mm: emit the "free" trace report before freeing memory in kmem_cache_free()
shm: extend forced shm destroy to support objects from several IPC nses
ipc: WARN if trying to remove ipc object which is absent
mm/swap.c:put_pages_list(): reinitialise the page list
|
|
Pull block fixes from Jens Axboe:
- Flip a cap check to avoid a selinux error (Alistair)
- Fix for a regression this merge window where we can miss a queue ref
put (me)
- Un-mark pstore-blk as broken, as the condition that triggered that
change has been rectified (Kees)
- Queue quiesce and sync fixes (Ming)
- FUA insertion fix (Ming)
- blk-cgroup error path put fix (Yu)
* tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block:
blk-mq: don't insert FUA request with data into scheduler queue
blk-cgroup: fix missing put device in error path from blkg_conf_pref()
block: avoid to quiesce queue in elevator_init_mq
Revert "mark pstore-blk as broken"
blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release()
block: fix missing queue put in error path
block: Check ADMIN before NICE for IOPRIO_CLASS_RT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"There is an ACPI stubs fix which is ACKed by the ACPI maintainer for
merging through my tree.
One item stand out and that is that I delete the <linux/sdb.h> header
that is used by nothing. I deleted this subsystem (through the GPIO
tree) a while back so I feel responsible for tidying up the floor.
Other than that it is the usual mistakes, a bit noisy around build
issue and Kconfig then driver fixes.
Specifics:
- Fix some stubs causing compile issues for ACPI.
- Fix some wakeups on AMD IRQs shared between GPIO and SCI.
- Fix a build warning in the Tegra driver.
- Fix a Kconfig issue in the Qualcomm driver.
- Add a missing include the RALink driver.
- Return a valid type for the Apple pinctrl IRQs.
- Implement some Qualcomm SDM845 dual-edge errata.
- Remove the unused <linux/sdb.h> header. (The subsystem was once
deleted by the pinctrl maintainer...)
- Fix a duplicate initialized in the Tegra driver.
- Fix register offsets for UFS and SDC in the Qualcomm SM8350 driver"
* tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: sm8350: Correct UFS and SDC offsets
pinctrl: tegra194: remove duplicate initializer again
Remove unused header <linux/sdb.h>
pinctrl: qcom: sdm845: Enable dual edge errata
pinctrl: apple: Always return valid type in apple_gpio_irq_type
pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c'
pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP
pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group()
pinctrl: amd: Fix wakeups when IRQ is shared with SCI
ACPI: Add stubs for wakeup handler functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add missing Kconfig option for ftrace direct multi sample, so it can
be compiled again, and also add s390 support for this sample.
- Update Christian Borntraeger's email address.
- Various fixes for memory layout setup. Besides other this makes it
possible to load shared DCSS segments again.
- Fix copy to user space of swapped kdump oldmem.
- Remove -mstack-guard and -mstack-size compile options when building
vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and
results in broken vdso code which causes more or less random
exceptions. Also remove the not needed -nostdlib option.
- Fix memory leak on cpu hotplug and return code handling in kexec
code.
- Wire up futex_waitv system call.
- Replace snprintf with sysfs_emit where appropriate.
* tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
ftrace/samples: add s390 support for ftrace direct multi sample
ftrace/samples: add missing Kconfig option for ftrace direct multi sample
MAINTAINERS: update email address of Christian Borntraeger
s390/kexec: fix memory leak of ipl report buffer
s390/kexec: fix return code handling
s390/dump: fix copying to user-space of swapped kdump oldmem
s390: wire up sys_futex_waitv system call
s390/vdso: filter out -mstack-guard and -mstack-size
s390/vdso: remove -nostdlib compiler flag
s390: replace snprintf in show functions with sysfs_emit
s390/boot: simplify and fix kernel memory layout setup
s390/setup: re-arrange memblock setup
s390/setup: avoid using memblock_enforce_memory_limit
s390/setup: avoid reserving memory above identity mapping
|
|
Pull cifs fixes from Steve French:
"Three small cifs/smb3 fixes: two to address minor coverity issues and
one cleanup"
* tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: introduce cifs_ses_mark_for_reconnect() helper
cifs: protect srv_count with cifs_tcp_ses_lock
cifs: move debug print out of spinlock
|
|
To clear a user buffer we cannot simply use memset, we have to use
clear_user(). With a virtio-mem device that registers a vmcore_cb and
has some logically unplugged memory inside an added Linux memory block,
I can easily trigger a BUG by copying the vmcore via "cp":
systemd[1]: Starting Kdump Vmcore Save Service...
kdump[420]: Kdump is using the default log level(3).
kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
kdump[465]: saving vmcore-dmesg.txt complete
kdump[467]: saving vmcore
BUG: unable to handle page fault for address: 00007f2374e01000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867
Oops: 0003 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014
RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86
Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81
RSP: 0018:ffffc9000073be08 EFLAGS: 00010212
RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000
RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008
RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50
R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000
R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8
FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0
Call Trace:
read_vmcore+0x236/0x2c0
proc_reg_read+0x55/0xa0
vfs_read+0x95/0x190
ksys_read+0x4f/0xc0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access
Prevention (SMAP)", which is used to detect wrong access from the kernel
to user buffers like this: SMAP triggers a permissions violation on
wrong access. In the x86-64 variant of clear_user(), SMAP is properly
handled via clac()+stac().
To fix, properly use clear_user() when we're dealing with a user buffer.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 997c136f518c ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages")
Signed-off-by: David Hildenbrand <[email protected]>
Acked-by: Baoquan He <[email protected]>
Cc: Dave Young <[email protected]>
Cc: Baoquan He <[email protected]>
Cc: Vivek Goyal <[email protected]>
Cc: Philipp Rudo <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The kmap_local conversion broke the ARM architecture, because the new
code assumes that all PTEs used for creating kmaps form a linear array
in memory, and uses array indexing to look up the kmap PTE belonging to
a certain kmap index.
On ARM, this cannot work, not only because the PTE pages may be
non-adjacent in memory, but also because ARM/!LPAE interleaves hardware
entries and extended entries (carrying software-only bits) in a way that
is not compatible with array indexing.
Fortunately, this only seems to affect configurations with more than 8
CPUs, due to the way the per-CPU kmap slots are organized in memory.
Work around this by permitting an architecture to set a Kconfig symbol
that signifies that the kmap PTEs do not form a lineary array in memory,
and so the only way to locate the appropriate one is to walk the page
tables.
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 2a15ba82fa6c ("ARM: highmem: Switch to generic kmap atomic")
Signed-off-by: Ard Biesheuvel <[email protected]>
Reported-by: Quanyang Wang <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Russell King (Oracle) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
DAMON debugfs is supposed to protect dbgfs_ctxs, dbgfs_nr_ctxs, and
dbgfs_dirs using damon_dbgfs_lock. However, some of the code is
accessing the variables without the protection. This fixes it by
protecting all such accesses.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 75c1c2b53c78 ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: SeongJae Park <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "DAMON fixes".
This patch (of 2):
DAMON users can trigger below warning in '__alloc_pages()' by invoking
write() to some DAMON debugfs files with arbitrarily high count
argument, because DAMON debugfs interface allocates some buffers based
on the user-specified 'count'.
if (unlikely(order >= MAX_ORDER)) {
WARN_ON_ONCE(!(gfp & __GFP_NOWARN));
return NULL;
}
Because the DAMON debugfs interface code checks failure of the
'kmalloc()', this commit simply suppresses the warnings by adding
'__GFP_NOWARN' flag.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
As done in commit d73dad4eb5ad ("kasan: test: bypass __alloc_size
checks") for __write_overflow warnings, also silence some more cases
that trip the __read_overflow warnings seen in 5.16-rc1[1]:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:10,
from include/linux/cpumask.h:12,
from include/linux/mm_types_task.h:14,
from include/linux/mm_types.h:5,
from include/linux/page-flags.h:13,
from arch/arm64/include/asm/mte.h:14,
from arch/arm64/include/asm/pgtable.h:12,
from include/linux/pgtable.h:6,
from include/linux/kasan.h:29,
from lib/test_kasan.c:10:
In function 'memcmp',
inlined from 'kasan_memcmp' at lib/test_kasan.c:897:2:
include/linux/fortify-string.h:263:25: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter)
263 | __read_overflow();
| ^~~~~~~~~~~~~~~~~
In function 'memchr',
inlined from 'kasan_memchr' at lib/test_kasan.c:872:2:
include/linux/fortify-string.h:277:17: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter)
277 | __read_overflow();
| ^~~~~~~~~~~~~~~~~
[1] http://kisskb.ellerman.id.au/kisskb/buildresult/14660585/log/
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d73dad4eb5ad ("kasan: test: bypass __alloc_size checks")
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Acked-by: Marco Elver <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we
bail out using "goto out_release_unlock;" in the cases where idx >=
size, or !huge_pte_none(), the code will detect that new_pagecache_page
== false, and so call restore_reserve_on_error(). In this case I see
restore_reserve_on_error() delete the reservation, and the following
call to remove_inode_hugepages() will increment h->resv_hugepages
causing a 100% reproducible leak.
We should treat the is_continue case similar to adding a page into the
pagecache and set new_pagecache_page to true, to indicate that there is
no reservation to restore on the error path, and we need not call
restore_reserve_on_error(). Rename new_pagecache_page to
page_in_pagecache to make that clear.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c7b1850dfb41 ("hugetlb: don't pass page cache pages to restore_reserve_on_error")
Signed-off-by: Mina Almasry <[email protected]>
Reported-by: James Houghton <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Cc: Wei Xu <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When hugetlb_vm_op_open() is called during copy_vma(), we may take the
reference to resv_map->css. Later, when clearing the reservation
pointer of old_vma after transferring it to new_vma, we forget to drop
the reference to resv_map->css. This leads to a reference leak of css.
Fixes this by adding a check to drop reservation css reference in
clear_vma_resv_huge_pages()
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 550a7d60bd5e35 ("mm, hugepages: add mremap() support for hugepage backed vma")
Signed-off-by: Bui Quang Minh <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Reviewed-by: Mina Almasry <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Muchun Song <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When kmemleak is enabled for SLOB, system does not boot and does not
print anything to the console. At the very early stage in the boot
process we hit infinite recursion from kmemleak_init() and eventually
kernel crashes.
kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but
kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not
valid for SLOB.
Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d8843922fba4 ("slab: Ignore internal flags in cache creation")
Signed-off-by: Rustam Kovhaev <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Reviewed-by: Muchun Song <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Glauber Costa <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
After building allmodconfig, there is an untracked vmlinux.lds file in
arch/hexagon/kernel:
$ git ls-files . --exclude-standard --others
arch/hexagon/kernel/vmlinux.lds
Ignore it as all other architectures have.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nathan Chancellor <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When building allmodconfig, there is a warning about TIMER_ENABLE being
redefined:
drivers/clocksource/timer-oxnas-rps.c:39:9: error: 'TIMER_ENABLE' macro redefined [-Werror,-Wmacro-redefined]
#define TIMER_ENABLE BIT(7)
^
arch/hexagon/include/asm/timer-regs.h:13:9: note: previous definition is here
#define TIMER_ENABLE 0
^
1 error generated.
The values in this header are only used in one file each, if they are
used at all. Remove the header and sink all of the constants into their
respective files.
TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h
TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in
arch/hexagon/kernel/time.c.
SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the
file's introduction in commit 71e4a47f32f4 ("Hexagon: Add time and timer
functions").
TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the
definition, rather than its use.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Brian Cain <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "Fixes for ARCH=hexagon allmodconfig", v2.
This series fixes some issues noticed with ARCH=hexagon allmodconfig.
This patch (of 3):
When building ARCH=hexagon allmodconfig, the following errors occur:
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
Export these symbols so that modules can use them without any errors.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 013bf24c3829 ("Hexagon: Provide basic implementation and/or stubs for I/O routines.")
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Brian Cain <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
After the memory is freed, it can be immediately allocated by other
CPUs, before the "free" trace report has been emitted. This causes
inaccurate traces.
For example, if the following sequence of events occurs:
CPU 0 CPU 1
(1) alloc xxxxxx
(2) free xxxxxx
(3) alloc xxxxxx
(4) free xxxxxx
Then they will be inaccurately reported via tracing, so that they appear
to have happened in this order:
CPU 0 CPU 1
(1) alloc xxxxxx
(2) alloc xxxxxx
(3) free xxxxxx
(4) free xxxxxx
This makes it look like CPU 1 somehow managed to allocate memory that
CPU 0 still had allocated for itself.
In order to avoid this, emit the "free xxxxxx" tracing report just
before the actual call to free the memory, instead of just after it.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yunfeng Ye <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Reviewed-by: John Hubbard <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently, the exit_shm() function not designed to work properly when
task->sysvshm.shm_clist holds shm objects from different IPC namespaces.
This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it
leads to use-after-free (reproducer exists).
This is an attempt to fix the problem by extending exit_shm mechanism to
handle shm's destroy from several IPC ns'es.
To achieve that we do several things:
1. add a namespace (non-refcounted) pointer to the struct shmid_kernel
2. during new shm object creation (newseg()/shmget syscall) we
initialize this pointer by current task IPC ns
3. exit_shm() fully reworked such that it traverses over all shp's in
task->sysvshm.shm_clist and gets IPC namespace not from current task
as it was before but from shp's object itself, then call
shm_destroy(shp, ns).
Note: We need to be really careful here, because as it was said before
(1), our pointer to IPC ns non-refcnt'ed. To be on the safe side we
using special helper get_ipc_ns_not_zero() which allows to get IPC ns
refcounter only if IPC ns not in the "state of destruction".
Q/A
Q: Why can we access shp->ns memory using non-refcounted pointer?
A: Because shp object lifetime is always shorther than IPC namespace
lifetime, so, if we get shp object from the task->sysvshm.shm_clist
while holding task_lock(task) nobody can steal our namespace.
Q: Does this patch change semantics of unshare/setns/clone syscalls?
A: No. It's just fixes non-covered case when process may leave IPC
namespace without getting task->sysvshm.shm_clist list cleaned up.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ab602f79915 ("shm: make exit_shm work proportional to task activity")
Co-developed-by: Manfred Spraul <[email protected]>
Signed-off-by: Manfred Spraul <[email protected]>
Signed-off-by: Alexander Mikhalitsyn <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Pavel Tikhomirov <[email protected]>
Cc: Vasily Averin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "shm: shm_rmid_forced feature fixes".
Some time ago I met kernel crash after CRIU restore procedure,
fortunately, it was CRIU restore, so, I had dump files and could do
restore many times and crash reproduced easily. After some
investigation I've constructed the minimal reproducer. It was found
that it's use-after-free and it happens only if sysctl
kernel.shm_rmid_forced = 1.
The key of the problem is that the exit_shm() function not handles shp's
object destroy when task->sysvshm.shm_clist contains items from
different IPC namespaces. In most cases this list will contain only
items from one IPC namespace.
How can this list contain object from different namespaces? The
exit_shm() function is designed to clean up this list always when
process leaves IPC namespace. But we made a mistake a long time ago and
did not add a exit_shm() call into the setns() syscall procedures.
The first idea was just to add this call to setns() syscall but it
obviously changes semantics of setns() syscall and that's
userspace-visible change. So, I gave up on this idea.
The first real attempt to address the issue was just to omit forced
destroy if we meet shp object not from current task IPC namespace [1].
But that was not the best idea because task->sysvshm.shm_clist was
protected by rwsem which belongs to current task IPC namespace. It
means that list corruption may occur.
Second approach is just extend exit_shm() to properly handle shp's from
different IPC namespaces [2]. This is really non-trivial thing, I've
put a lot of effort into that but not believed that it's possible to
make it fully safe, clean and clear.
Thanks to the efforts of Manfred Spraul working an elegant solution was
designed. Thanks a lot, Manfred!
Eric also suggested the way to address the issue in ("[RFC][PATCH] shm:
In shm_exit destroy all created and never attached segments") Eric's
idea was to maintain a list of shm_clists one per IPC namespace, use
lock-less lists. But there is some extra memory consumption-related
concerns.
An alternative solution which was suggested by me was implemented in
("shm: reset shm_clist on setns but omit forced shm destroy"). The idea
is pretty simple, we add exit_shm() syscall to setns() but DO NOT
destroy shm segments even if sysctl kernel.shm_rmid_forced = 1, we just
clean up the task->sysvshm.shm_clist list.
This chages semantics of setns() syscall a little bit but in comparision
to the "naive" solution when we just add exit_shm() without any special
exclusions this looks like a safer option.
[1] https://lkml.org/lkml/2021/7/6/1108
[2] https://lkml.org/lkml/2021/7/14/736
This patch (of 2):
Let's produce a warning if we trying to remove non-existing IPC object
from IPC namespace kht/idr structures.
This allows us to catch possible bugs when the ipc_rmid() function was
called with inconsistent struct ipc_ids*, struct kern_ipc_perm*
arguments.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Co-developed-by: Manfred Spraul <[email protected]>
Signed-off-by: Manfred Spraul <[email protected]>
Signed-off-by: Alexander Mikhalitsyn <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Pavel Tikhomirov <[email protected]>
Cc: Vasily Averin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
While free_unref_page_list() puts pages onto the CPU local LRU list, it
does not remove them from the list they were passed in on. That makes
the list_head appear to be non-empty, and would lead to various
corruption problems if we didn't have an assertion that the list was
empty.
Reinitialise the list after calling free_unref_page_list() to avoid this
problem.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 988c69f1bc23 ("mm: optimise put_pages_list()")
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: Steve French <[email protected]>
Reported-by: Namjae Jeon <[email protected]>
Tested-by: Steve French <[email protected]>
Tested-by: Namjae Jeon <[email protected]>
Cc: Steve French <[email protected]>
Cc: Hyeoncheol Lee <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
On kernels before v5.15, calling read() on a unix socket after
shutdown(SHUT_RD) or shutdown(SHUT_RDWR) would return the data
previously written or EOF. But now, while read() after
shutdown(SHUT_RD) still behaves the same way, read() after
shutdown(SHUT_RDWR) always fails with -EINVAL.
This behaviour change was apparently inadvertently introduced as part of
a bug fix for a different regression caused by the commit adding sockmap
support to af_unix, commit 94531cfcbe79c359 ("af_unix: Add
unix_stream_proto for sockmap"). Those commits, for unclear reasons,
started setting the socket state to TCP_CLOSE on shutdown(SHUT_RDWR),
while this state change had previously only been done in
unix_release_sock().
Restore the original behaviour. The sockmap tests in
tests/selftests/bpf continue to pass after this patch.
Fixes: d0c6416bd7091647f60 ("unix: Fix an issue in unix_shutdown causing the other end read/write failures")
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Vincent Whitchurch <[email protected]>
Tested-by: Casey Schaufler <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Paolo Abeni says:
====================
mptcp: fix 3rd ack rtx timer
Eric noted that the MPTCP code do the wrong thing to schedule
the MPJ 3rd ack timer. He also provided a patch to address the
issues (patch 1/2).
To fix for good the MPJ 3rd ack retransmission timer, we additionally
need to set it after the current ack is transmitted (patch 2/2)
Note that the bug went unnotice so far because all the related
tests required some running data transfer, and that causes
MPTCP-level ack even on the opening MPJ subflow. We now have
explicit packet drill coverage for this code path.
====================
Signed-off-by: David S. Miller <[email protected]>
|