aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-10-18bnxt_en: fix memory leak in bnxt_nvm_test()Vikas Gupta1-5/+6
Free the kzalloc'ed buffer before returning in the success path. Fixes: 5b6ff128fdf6 ("bnxt_en: implement callbacks for devlink selftests") Signed-off-by: Vikas Gupta <[email protected]> Signed-off-by: Michael Chan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-18drm/amdgpu: Fix for BO move issueArunpravin Paneer Selvam1-0/+3
A user reported a bug on CAPE VERDE system where uvd_v3_1 IP component failed to initialize as there is an issue with BO move code from one memory to other. In function amdgpu_mem_visible() called by amdgpu_bo_move(), when there are no blocks to compare or if we have a single block then break the loop. Fixes: 312b4dc11d4f ("drm/amdgpu: Fix VRAM BO swap issue") Signed-off-by: Arunpravin Paneer Selvam <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amdgpu: dequeue mes scheduler during finiYuBiao Wang1-3/+39
[Why] If mes is not dequeued during fini, mes will be in an uncleaned state during reload, then mes couldn't receive some commands which leads to reload failure. [How] Perform MES dequeue via MMIO after all the unmap jobs are done by mes and before kiq fini. v2: Move the dequeue operation inside kiq_hw_fini. Signed-off-by: YuBiao Wang <[email protected]> Reviewed-by: Jack Xiao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/pm: enable thermal alert on smu_v13_0_10Kenneth Feng1-6/+4
enable thermal alert on smu_v13_0_10 Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amdgpu: Program GC registers through RLCG interface in gfx_v11/gmc_v11Yifan Zha3-9/+13
[Why] L1 blocks most of GC registers accessing by MMIO. [How] Use RLCG interface to program GC registers under SRIOV VF in full access time. Signed-off-by: Yifan Zha <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amdkfd: Fix type of reset_type parameter in hqd_destroy() callbackNathan Chancellor1-2/+3
When booting a kernel compiled with CONFIG_CFI_CLANG on a machine with an RX 6700 XT, there is a CFI failure in kfd_destroy_mqd_cp(): [ 12.894543] CFI failure at kfd_destroy_mqd_cp+0x2a/0x40 [amdgpu] (target: hqd_destroy_v10_3+0x0/0x260 [amdgpu]; expected type: 0x8594d794) Clang's kernel Control Flow Integrity (kCFI) makes sure that all indirect call targets have a type that exactly matches the function pointer prototype. In this case, hqd_destroy()'s third parameter, reset_type, should have a type of 'uint32_t' but every implementation of this callback has a third parameter type of 'enum kfd_preempt_type'. Update the function pointer prototype to match reality so that there is no more CFI violation. Link: https://github.com/ClangBuiltLinux/linux/issues/1738 Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/display: Increase frame size limit for display_mode_vba_util_32.oGuenter Roeck1-1/+1
Building 32-bit images may fail with the following error. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c: In function ‘dml32_UseMinimumDCFCLK’: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:3142:1: error: the frame size of 1096 bytes is larger than 1024 bytes This is seen when building i386:allmodconfig with any of the following compilers. gcc (Debian 12.2.0-3) 12.2.0 gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0 The problem is not seen if the compiler supports GCC_PLUGIN_LATENT_ENTROPY because in that case CONFIG_FRAME_WARN is already set to 2048 even for 32-bit builds. dml32_UseMinimumDCFCLK() was introduced with commit dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321"). It declares a large number of local variables. Increase the frame size for the affected file to 2048, similar to other files in the same directory, to enable 32-bit build tests with affected compilers. Fixes: dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321") Cc: Aurabindo Pillai <[email protected]> Reported-by: Łukasz Bartosik <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/pm: add SMU IP v13.0.4 IF version define to V7Tim Huang1-1/+1
The pmfw has changed the driver interface version, so keep same with the fw. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.0.x Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/pm: update SMU IP v13.0.4 driver interface versionTim Huang1-2/+15
Update the SMU driver interface version to V7. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.0.x Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/pm: Init pm_attr_list when dpm is disabledZhenGuo Yin1-2/+2
[Why] In SRIOV multi-vf, dpm is always disabled, and pm_attr_list won't be initialized. There will be a NULL pointer call trace after removing the dpm check condition in amdgpu_pm_sysfs_fini. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:amdgpu_device_attr_remove_groups+0x20/0x90 [amdgpu] Call Trace: <TASK> amdgpu_pm_sysfs_fini+0x2f/0x40 [amdgpu] amdgpu_device_fini_hw+0xdf/0x290 [amdgpu] [How] List pm_attr_list should be initialized when dpm is disabled. Fixes: a6ad27cec585fe ("drm/amd/pm: Remove redundant check condition") Signed-off-by: ZhenGuo Yin <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/pm: disable cstate feature for gpu reset scenarioEvan Quan3-0/+25
Suggested by PMFW team and same as what did for gfxoff feature. This can address some Mode1Reset failures observed on SMU13.0.0. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.0.x Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/pm: fulfill SMU13.0.7 cstate control interfaceEvan Quan1-0/+12
Fulfill the functionality for cstate control. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.0.x Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/pm: fulfill SMU13.0.0 cstate control interfaceEvan Quan1-0/+11
Fulfill the functionality for cstate control. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.0.x Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amdgpu: Add sriov vf ras support in amdgpu_ras_asic_supportedYiPeng Chai1-5/+9
V2: Add sriov vf ras support in amdgpu_ras_asic_supported. Signed-off-by: YiPeng Chai <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amdgpu: Enable ras support for mp0 v13_0_0 and v13_0_10YiPeng Chai1-0/+10
V1: Enable ras support for CHIP_IP_DISCOVERY asic type. V2: 1. Change commit comment. 2. Enable ras support for mp0 v13_0_0 and v13_0_10. Signed-off-by: YiPeng Chai <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amdgpu: Enable gmc soft reset on gmc_v11_0_3YiPeng Chai1-0/+1
Enable gmc soft reset on gmc_v11_0_3. Signed-off-by: YiPeng Chai <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amdgpu: skip mes self test for gc 11.0.3Likun Gao1-1/+2
Temporary disable mes self teset for gc 11.0.3. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/pm: skip loading pptable from driver on secure board for smu_v13_0_10Kenneth Feng1-1/+2
skip loading pptable from driver on secure board since it's loaded from psp. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Guan Yu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/amdgpu: enable gfx clock gating features on smu_v13_0_10Kenneth Feng2-1/+6
enable gfx clock gating features on smu_v13_0_10 Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Jack Gui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/pm: remove the pptable id override on smu_v13_0_10Kenneth Feng1-3/+0
remove the pptable id override on smu_v13_0_10, and the id is fetched from vbios now. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amd/pm: temporarily disable thermal alert on smu_v13_0_10Kenneth Feng1-4/+6
temporarily disable thermal alert on smu_v13_0_10 due to kfd test fail. will enable it again after confirming the thermal hardware setting. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly"Asher Song1-12/+13
This reverts commit 16fb4dca95daa9d8e037201166a58de8284f4268. Unfortunately, that commit causes fan monitors can't be read and written properly. Fixes: 16fb4dca95daa9 ("drm/amdgpu: getting fan speed pwm for vega10 properly") Signed-off-by: Asher Song <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amdgpu: Refactor mode2 reset logic for v11.0.7Victor Zhao1-8/+17
- refactor mode2 on v11.0.7 to align with aldebaran - comment out using mode2 reset as default for now, will introduce another controller to replace previous reset_level_mask v2: squash in unused variable removal (Alex) Signed-off-by: Victor Zhao <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18Revert "drm/amdgpu: let mode2 reset fallback to default when failure"Victor Zhao9-20/+2
This reverts commit dac6b80818ac2353631c5a33d140d8d5508e2957. This commit reverted the AMDGPU_SKIP_MODE2_RESET as it conflicts with the original design of reset handler. Will redesign it. Fixes: dac6b80818ac23 ("drm/amdgpu: let mode2 reset fallback to default when failure") Signed-off-by: Victor Zhao <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18Revert "drm/amdgpu: add debugfs amdgpu_reset_level"Victor Zhao4-17/+0
This reverts commit 5bd8d53f6fa53eab5433698d1362dae2aa53c1cc. This commit breaks the reset logic for aldebaran, revert it for now. Will move the mask inside the reset handler. Fixes: 5bd8d53f6fa53e ("drm/amdgpu: add debugfs amdgpu_reset_level") Signed-off-by: Victor Zhao <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18drm/amdgpu: set vm_update_mode=0 as default for Sienna Cichlid in SRIOV caseDanijel Slivka3-1/+15
For asic with VF MMIO access protection avoid using CPU for VM table updates. CPU pagetable updates have issues with HDP flush as VF MMIO access protection blocks write to mmBIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL register during sriov runtime. v3: introduce virtualization capability flag AMDGPU_VF_MMIO_ACCESS_PROTECT which indicates that VF MMIO write access is not allowed in sriov runtime Signed-off-by: Danijel Slivka <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-10-18dm clone: Fix typo in block_device format specifierNikos Tsironis1-1/+1
Use %pg for printing the block device name, instead of %pd. Fixes: 385411ffba0c ("dm: stop using bdevname") Cc: [email protected] # v5.18+ Signed-off-by: Nikos Tsironis <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-10-18dm: remove unnecessary assignment statement in alloc_dev()Genjian Zhang1-1/+0
Fixes: 74fe6ba923949 ("dm: convert to blk_alloc_disk/blk_cleanup_disk") Signed-off-by: Genjian Zhang <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-10-18dm verity: Add documentation for try_verify_in_tasklet optionMilan Broz1-0/+4
Add documentation that was missing from commit 5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature"). Signed-off-by: Milan Broz <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-10-18dm cache: delete the redundant word 'each' in commentShaomin Deng1-1/+1
Signed-off-by: Shaomin Deng <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-10-18dm raid: fix typo in analyse_superblocks code commentJiangshan Yi1-1/+1
Reported-by: k2ci <[email protected]> Signed-off-by: Jiangshan Yi <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-10-18dm verity: enable WQ_HIGHPRI on verify_wqNathan Huckleberry1-8/+10
WQ_HIGHPRI increases throughput and decreases disk latency when using dm-verity. This is important in Android for camera startup speed. The following tests were run by doing 60 seconds of random reads using a dm-verity device backed by two ramdisks. Without WQ_HIGHPRI lat (usec): min=13, max=3947, avg=69.53, stdev=50.55 READ: bw=51.1MiB/s (53.6MB/s), 51.1MiB/s-51.1MiB/s (53.6MB/s-53.6MB/s) With WQ_HIGHPRI: lat (usec): min=13, max=7854, avg=31.15, stdev=30.42 READ: bw=116MiB/s (121MB/s), 116MiB/s-116MiB/s (121MB/s-121MB/s) Further testing was done by measuring how long it takes to open a camera on an Android device. Without WQ_HIGHPRI Total verity work queue wait times (ms): 880.960, 789.517, 898.852 With WQ_HIGHPRI: Total verity work queue wait times (ms): 528.824, 439.191, 433.300 The average time to open the camera is reduced by 350ms (or 40-50%). Signed-off-by: Nathan Huckleberry <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-10-18dm raid: delete the redundant word 'that' in commentJilin Yuan1-1/+1
Signed-off-by: Jilin Yuan <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-10-18dm: change from DMWARN to DMERR or DMCRIT for fatal errorsMikulas Patocka5-85/+85
Change DMWARN to DMERR in cases when there is an unrecoverable error. Change DMWARN to DMCRIT when handling of a case is unimplemented. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-10-18Merge tag 'for-6.1-rc1-tag' of ↵Linus Torvalds7-27/+91
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fiemap fixes: - add missing path cache update - fix processing of delayed data and tree refs during backref walking, this could lead to reporting incorrect extent sharing - fix extent range locking under heavy contention to avoid deadlocks - make it possible to test send v3 in debugging mode - update links in MAINTAINERS * tag 'for-6.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: MAINTAINERS: update btrfs website links and files btrfs: ignore fiemap path cache if we have multiple leaves for a data extent btrfs: fix processing of delayed tree block refs during backref walking btrfs: fix processing of delayed data refs during backref walking btrfs: delete stale comments after merge conflict resolution btrfs: unlock locked extent area if we have contention btrfs: send: update command for protocol version check btrfs: send: allow protocol version 3 with CONFIG_BTRFS_DEBUG btrfs: add missing path cache update during fiemap
2022-10-18x86/resctrl: Fix min_cbm_bits for AMDBabu Moger1-6/+2
AMD systems support zero CBM (capacity bit mask) for cache allocation. That is reflected in rdt_init_res_defs_amd() by: r->cache.arch_has_empty_bitmaps = true; However given the unified code in cbm_validate(), checking for: val == 0 && !arch_has_empty_bitmaps is not enough because of another check in cbm_validate(): if ((zero_bit - first_bit) < r->cache.min_cbm_bits) The default value of r->cache.min_cbm_bits = 1. Leading to: $ cd /sys/fs/resctrl $ mkdir foo $ cd foo $ echo L3:0=0 > schemata -bash: echo: write error: Invalid argument $ cat /sys/fs/resctrl/info/last_cmd_status Need at least 1 bits in the mask Initialize the min_cbm_bits to 0 for AMD. Also, remove the default setting of min_cbm_bits and initialize it separately. After the fix: $ cd /sys/fs/resctrl $ mkdir foo $ cd foo $ echo L3:0=0 > schemata $ cat /sys/fs/resctrl/info/last_cmd_status ok Fixes: 316e7f901f5a ("x86/resctrl: Add struct rdt_cache::arch_has_{sparse, empty}_bitmaps") Co-developed-by: Stephane Eranian <[email protected]> Signed-off-by: Stephane Eranian <[email protected]> Signed-off-by: Babu Moger <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Ingo Molnar <[email protected]> Reviewed-by: James Morse <[email protected]> Reviewed-by: Reinette Chatre <[email protected]> Reviewed-by: Fenghua Yu <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]
2022-10-18Merge tag 'erofs-for-6.1-rc2-fixes' of ↵Linus Torvalds4-25/+23
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: - Fix invalid unmapped accesses when initializing compressed inodes - Fix up very rare hung on page lock after enabling compressed data deduplication - Fix up inplace decompression success rate - Take s_inode_list_lock to protect sb->s_inodes for fscache shared domain * tag 'erofs-for-6.1-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: protect s_inodes with s_inode_list_lock for fscache erofs: fix up inplace decompression success rate erofs: shouldn't churn the mapping page for duplicated copies erofs: fix illegal unmapped accesses in z_erofs_fill_inode_lazy()
2022-10-18dm bufio: use the acquire memory barrier when testing for B_READINGMikulas Patocka1-6/+7
The function test_bit doesn't provide any memory barrier. It may be possible that the read requests that follow test_bit(B_READING, &b->state) are reordered before the test, reading invalid data that existed before B_READING was cleared. Fix this bug by changing test_bit to test_bit_acquire. This is particularly important on arches with weak(er) memory ordering (e.g. arm64). Depends-On: 8238b4579866 ("wait_on_bit: add an acquire memory barrier") Depends-On: d6ffe6067a54 ("provide arch_test_bit_acquire for architectures that define test_bit") Cc: [email protected] Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-10-18cifs: Fix memory leak when build ntlmssp negotiate blob failedZhang Xiaoxu1-1/+1
There is a memory leak when mount cifs: unreferenced object 0xffff888166059600 (size 448): comm "mount.cifs", pid 51391, jiffies 4295596373 (age 330.596s) hex dump (first 32 bytes): fe 53 4d 42 40 00 00 00 00 00 00 00 01 00 82 00 .SMB@........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000060609a61>] mempool_alloc+0xe1/0x260 [<00000000adfa6c63>] cifs_small_buf_get+0x24/0x60 [<00000000ebb404c7>] __smb2_plain_req_init+0x32/0x460 [<00000000bcf875b4>] SMB2_sess_alloc_buffer+0xa4/0x3f0 [<00000000753a2987>] SMB2_sess_auth_rawntlmssp_negotiate+0xf5/0x480 [<00000000f0c1f4f9>] SMB2_sess_setup+0x253/0x410 [<00000000a8b83303>] cifs_setup_session+0x18f/0x4c0 [<00000000854bd16d>] cifs_get_smb_ses+0xae7/0x13c0 [<000000006cbc43d9>] mount_get_conns+0x7a/0x730 [<000000005922d816>] cifs_mount+0x103/0xd10 [<00000000e33def3b>] cifs_smb3_do_mount+0x1dd/0xc90 [<0000000078034979>] smb3_get_tree+0x1d5/0x300 [<000000004371f980>] vfs_get_tree+0x41/0xf0 [<00000000b670d8a7>] path_mount+0x9b3/0xdd0 [<000000005e839a7d>] __x64_sys_mount+0x190/0x1d0 [<000000009404c3b9>] do_syscall_64+0x35/0x80 When build ntlmssp negotiate blob failed, the session setup request should be freed. Fixes: 49bd49f983b5 ("cifs: send workstation name during ntlmssp session setup") Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Reviewed-by: Shyam Prasad N <[email protected]> Signed-off-by: Zhang Xiaoxu <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-10-18cifs: set rc to -ENOENT if we can not get a dentry for the cached dirRonnie Sahlberg1-2/+4
We already set rc to this return code further down in the function but we can set it earlier in order to suppress a smash warning. Also fix a false positive for Coverity. The reason this is a false positive is that this happens during umount after all files and directories have been closed but mosetting on ->on_list to suppress the warning. Reported-by: Dan carpenter <[email protected]> Reported-by: coverity-bot <[email protected]> Addresses-Coverity-ID: 1525256 ("Concurrent data access violations") Fixes: a350d6e73f5e ("cifs: enable caching of directories for which a lease is held") Signed-off-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-10-18cifs: use LIST_HEAD() and list_move() to simplify codeYang Yingliang1-8/+4
list_head can be initialized automatically with LIST_HEAD() instead of calling INIT_LIST_HEAD(). Using list_move() instead of list_del() and list_add(). Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-10-18cifs: Fix xid leak in cifs_get_file_info_unix()Zhang Xiaoxu1-2/+4
If stardup the symlink target failed, should free the xid, otherwise the xid will be leaked. Fixes: 76894f3e2f71 ("cifs: improve symlink handling for smb2+") Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Zhang Xiaoxu <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-10-18cifs: Fix xid leak in cifs_ses_add_channel()Zhang Xiaoxu1-0/+1
Before return, should free the xid, otherwise, the xid will be leaked. Fixes: d70e9fa55884 ("cifs: try opening channels after mounting") Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Zhang Xiaoxu <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-10-18cifs: Fix xid leak in cifs_flock()Zhang Xiaoxu1-4/+7
If not flock, before return -ENOLCK, should free the xid, otherwise, the xid will be leaked. Fixes: d0677992d2af ("cifs: add support for flock") Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Zhang Xiaoxu <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-10-18cifs: Fix xid leak in cifs_copy_file_range()Zhang Xiaoxu1-2/+5
If the file is used by swap, before return -EOPNOTSUPP, should free the xid, otherwise, the xid will be leaked. Fixes: 4e8aea30f775 ("smb3: enable swap on SMB3 mounts") Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Zhang Xiaoxu <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-10-18cifs: Fix xid leak in cifs_create()Zhang Xiaoxu1-2/+4
If the cifs already shutdown, we should free the xid before return, otherwise, the xid will be leaked. Fixes: 087f757b0129 ("cifs: add shutdown support") Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Zhang Xiaoxu <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-10-18drm/mgag200: Fix PLL setup for G200_SE_A rev >=4Jocelyn Falempe1-1/+2
For G200_SE_A, PLL M setting is wrong, which leads to blank screen, or "signal out of range" on VGA display. previous code had "m |= 0x80" which was changed to m |= ((pixpllcn & BIT(8)) >> 1); Tested on G200_SE_A rev 42 This line of code was moved to another file with commit 877507bb954e ("drm/mgag200: Provide per-device callbacks for PIXPLLC") but can be easily backported before this commit. v2: * put BIT(7) First to respect MSB-to-LSB (Thomas) * Add a comment to explain that this bit must be set (Thomas) Fixes: 2dd040946ecf ("drm/mgag200: Store values (not bits) in struct mgag200_pll_values") Cc: [email protected] Signed-off-by: Jocelyn Falempe <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-10-18Merge drm/drm-next into drm-misc-nextMaxime Ripard11870-182092/+515907
Let's kick-off this release cycle. Signed-off-by: Maxime Ripard <[email protected]>
2022-10-18Merge tag 'cpufreq-arm-fixes-6.1-rc' of ↵Rafael J. Wysocki5-25/+20
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull cpufreq ARM fixes / cleanups for 6.1-rc from Viresh Kumar: "- Fix module loading in Tegra124 driver (Jon Hunter). - Fix memory leak and update to read-only region in qcom driver (Fabien Parent). - Miscellaneous minor cleanups to cpufreq drivers (Fabien Parent and Yang Yingliang)." * tag 'cpufreq-arm-fixes-6.1-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: sun50i: Switch to use dev_err_probe() helper cpufreq: qcom-nvmem: Switch to use dev_err_probe() helper cpufreq: imx6q: Switch to use dev_err_probe() helper cpufreq: dt: Switch to use dev_err_probe() helper cpufreq: qcom: remove unused parameter in function definition cpufreq: qcom: fix writes in read-only memory region cpufreq: qcom: fix memory leak in error path cpufreq: tegra194: Fix module loading
2022-10-18HID: lenovo: Make array tp10ubkbd_led static constColin Ian King1-1/+1
Don't populate the read-only array tp10ubkbd_led on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.