aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-09-21i2c-eg20t: fix race between i2c init and interrupt enableYadi.hu1-7/+11
the eg20t driver call request_irq() function before the pch_base_address, base address of i2c controller's register, is assigned an effective value. there is one possible scenario that an interrupt which isn't inside eg20t arrives immediately after request_irq() is executed when i2c controller shares an interrupt number with others. since the interrupt handler pch_i2c_handler() has already active as shared action, it will be called and read its own register to determine if this interrupt is from itself. At that moment, since base address of i2c registers is not remapped in kernel space yet,so the INT handler will access an illegal address and then a error occurs. Signed-off-by: Yadi.hu <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2016-09-21perf hists: Use bigger buffer for stdio headersJiri Olsa1-1/+1
With node column on big CPUs servers we can run out of stdio header space quite soon. Enlarging header buffer. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-21perf evsel: Remove superfluous initialization of weightJiri Olsa1-2/+0
Removing superfluous initialization of weight, it's already set to 0 via memset. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-21MIPS: vDSO: Fix Malta EVA mapping to vDSO page structsJames Hogan1-4/+4
The page structures associated with the vDSO pages in the kernel image are calculated using virt_to_page(), which uses __pa() under the hood to find the pfn associated with the virtual address. The vDSO data pointers however point to kernel symbols, so __pa_symbol() should really be used instead. Since there is no equivalent to virt_to_page() which uses __pa_symbol(), fix init_vdso_image() to work directly with pfns, calculated with __phys_to_pfn(__pa_symbol(...)). This issue broke the Malta Enhanced Virtual Addressing (EVA) configuration which has a non-default implementation of __pa_symbol(). This is because it uses a physical alias so that the kernel executes from KSeg0 (VA 0x80000000 -> PA 0x00000000), while RAM is provided to the kernel in the KUSeg range (VA 0x00000000 -> PA 0x80000000) which uses the same underlying RAM. Since there are no page structures associated with the low physical address region, some arbitrary kernel memory would be interpreted as a page structure for the vDSO pages and badness ensues. Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Signed-off-by: James Hogan <[email protected]> Cc: Leonid Yegoshin <[email protected]> Cc: [email protected] Cc: <[email protected]> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/14229/ Signed-off-by: Ralf Baechle <[email protected]>
2016-09-21net: can: ifi: Configure transmitter delayMarek Vasut1-1/+10
Configure the transmitter delay register at +0x1c to correctly handle the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample point) to a proper offset, so that the TDC mechanism works and won't generate error frames on the CAN link. Signed-off-by: Marek Vasut <[email protected]> Cc: Marc Kleine-Budde <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Oliver Hartkopp <[email protected]> Cc: Wolfgang Grandegger <[email protected]> Cc: linux-stable <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2016-09-21vti6: fix input pathNicolas Dichtel4-10/+16
Since commit 1625f4529957, vti6 is broken, all input packets are dropped (LINUX_MIB_XFRMINNOSTATES is incremented). XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 is set by vti6_rcv() before calling xfrm6_rcv()/xfrm6_rcv_spi(), thus we cannot set to NULL that value in xfrm6_rcv_spi(). A new function xfrm6_rcv_tnl() that enables to pass a value to xfrm6_rcv_spi() is added, so that xfrm6_rcv() is not touched (this function is used in several handlers). CC: Alexey Kodanev <[email protected]> Fixes: 1625f4529957 ("net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_key") Signed-off-by: Nicolas Dichtel <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2016-09-21ipmr, ip6mr: return lastuse relative to nowNikolay Aleksandrov2-4/+10
When I introduced the lastuse member I made a subtle error because it was returned as an absolute value but that is meaningless to user-space as it doesn't allow to see how old exactly an entry is. Let's make it similar to how the bridge returns such values and make it relative to "now" (jiffies). This allows us to show the actual age of the entries and is much more useful (e.g. user-space daemons can age out entries, iproute2 can display the lastuse properly). Fixes: 43b9e1274060 ("net: ipmr/ip6mr: add support for keeping an entry age") Reported-by: Satish Ashok <[email protected]> Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-09-21Merge branch 'r8152-phy-fixes'David S. Miller1-135/+146
Hayes Wang says: ==================== r8152: correct the flow of PHY First, to enable the PHY as early as possible. Some settings may fail if the PHY is power down. Move the other PHY settings to hw_phy_cfg() to make sure the order is correct. Finally, disable ALDPS and EEE before updating the PHY for RTL8153. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-09-21r8152: disable ALDPS and EEE before setting PHYhayeswang1-2/+8
Disable ALDPS and EEE to avoid the possible failure when setting the PHY. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-09-21r8152: remove r8153_enable_eeehayeswang1-7/+3
Remove r8153_enable_eee(). Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-09-21r8152: move PHY settings to hw_phy_cfghayeswang1-6/+8
Move the PHY relative settings together to hw_phy_cfg(). Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-09-21r8152: move enabling PHYhayeswang1-18/+25
Move enabling PHY to init(), otherwise some other settings may fail. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-09-21r8152: move some functionshayeswang1-112/+112
Move the following functions forward. r8152_mmd_indirect() r8152_mmd_read() r8152_mmd_write() r8152_eee_en() r8152b_enable_eee() r8153_eee_en() r8153_enable_eee() r8152b_enable_fc() r8153_aldps_en() Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-09-21cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapterHariprasad Shenai6-11/+45
We were missing check for 25G and 100G while checking port speed, which lead to less number of queues getting allocated for 25G & 100G adapters and leading to low throughput. Adding the missing check for both NIC and vNIC driver. Also fixes port advertisement for 25G and 100G in ethtool output. Signed-off-by: Hariprasad Shenai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-09-21powerpc/powernv/pci: Fix m64 checks for SR-IOV and window alignmentRussell Currey1-2/+9
Commit 5958d19a143e checks for prefetchable m64 BARs by comparing the addresses instead of using resource flags. This broke SR-IOV as the m64 check in pnv_pci_ioda_fixup_iov_resources() fails. The condition in pnv_pci_window_alignment() also changed to checking only IORESOURCE_MEM_64 instead of both IORESOURCE_MEM_64 and IORESOURCE_PREFETCH. Revert these cases to the previous behaviour, adding a new helper function to do so. This is named pnv_pci_is_m64_flags() to make it clear this function is only looking at resource flags and should not be relied on for non-SRIOV resources. Fixes: 5958d19a143e ("Fix incorrect PE reservation attempt on some 64-bit BARs") Reported-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Russell Currey <[email protected]> Tested-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2016-09-20Merge tag 'linux-can-fixes-for-4.8-20160919' of ↵David S. Miller1-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-09-19 this is a pull request of one patch for the upcoming linux-4.8 release. The patch by Fabio Estevam fixes the pm handling in the flexcan driver. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-09-20Merge tag 'usercopy-v4.8-rc8' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull usercopy hardening fix from Kees Cook: "Expand the arm64 vmalloc check to include skipping the module space too" * tag 'usercopy-v4.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: usercopy: Check for module addresses
2016-09-20fix fault_in_multipages_...() on architectures with no-op access_ok()Al Viro1-19/+19
Switching iov_iter fault-in to multipages variants has exposed an old bug in underlying fault_in_multipages_...(); they break if the range passed to them wraps around. Normally access_ok() done by callers will prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into such a range and they should not point to any valid objects). However, on architectures where userland and kernel live in different MMU contexts (e.g. s390) access_ok() is a no-op and on those a range with a wraparound can reach fault_in_multipages_...(). Since any wraparound means EFAULT there, the fix is trivial - turn those while (uaddr <= end) ... into if (unlikely(uaddr > end)) return -EFAULT; do ... while (uaddr <= end); Reported-by: Jan Stancek <[email protected]> Tested-by: Jan Stancek <[email protected]> Cc: [email protected] # v3.5+ Signed-off-by: Al Viro <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-09-20mm: usercopy: Check for module addressesLaura Abbott1-1/+4
While running a compile on arm64, I hit a memory exposure usercopy: kernel memory exposure attempt detected from fffffc0000f3b1a8 (buffer_head) (1 bytes) ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:75! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_broute bridge stp llc ebtable_nat ip6table_security ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle iptable_security iptable_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle ebtable_filter ebtables ip6table_filter ip6_tables vfat fat xgene_edac xgene_enet edac_core i2c_xgene_slimpro i2c_core at803x realtek xgene_dma mdio_xgene gpio_dwapb gpio_xgene_sb xgene_rng mailbox_xgene_slimpro nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c sdhci_of_arasan sdhci_pltfm sdhci mmc_core xhci_plat_hcd gpio_keys CPU: 0 PID: 19744 Comm: updatedb Tainted: G W 4.8.0-rc3-threadinfo+ #1 Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board, BIOS 3.06.12 Aug 12 2016 task: fffffe03df944c00 task.stack: fffffe00d128c000 PC is at __check_object_size+0x70/0x3f0 LR is at __check_object_size+0x70/0x3f0 ... [<fffffc00082b4280>] __check_object_size+0x70/0x3f0 [<fffffc00082cdc30>] filldir64+0x158/0x1a0 [<fffffc0000f327e8>] __fat_readdir+0x4a0/0x558 [fat] [<fffffc0000f328d4>] fat_readdir+0x34/0x40 [fat] [<fffffc00082cd8f8>] iterate_dir+0x190/0x1e0 [<fffffc00082cde58>] SyS_getdents64+0x88/0x120 [<fffffc0008082c70>] el0_svc_naked+0x24/0x28 fffffc0000f3b1a8 is a module address. Modules may have compiled in strings which could get copied to userspace. In this instance, it looks like "." which matches with a size of 1 byte. Extend the is_vmalloc_addr check to be is_vmalloc_or_module_addr to cover all possible cases. Signed-off-by: Laura Abbott <[email protected]> Signed-off-by: Kees Cook <[email protected]>
2016-09-20x86/dumpstack: Fix show_stack() task pointer regressionJosh Poimboeuf1-1/+1
With the following commit: e18bcccd1a4e ("x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder") The task pointer argument to show_stack_log_lvl() in show_stack() was inadvertently changed to 'current'. Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: tip-bot for Josh Poimboeuf <[email protected]> Fixes: e18bcccd1a4e ("x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder") Link: http://lkml.kernel.org/r/20160920155340.yhewlx7vmgmov5fb@treble Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20Merge tag 'perf-core-for-mingo-20160920' of ↵Ingo Molnar46-131/+698
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Support event group view with hierarchy mode in 'perf top' and 'perf report' (Namhyung Kim) e.g.: $ perf record -e '{cycles,instructions}' make $ perf report --hierarchy --stdio ... # Overhead Command / Shared Object / Symbol # ...................... .................................. ... 25.74% 27.18% sh 19.96% 24.14% libc-2.24.so 9.55% 14.64% [.] __strcmp_sse2 1.54% 0.00% [.] __tfind 1.07% 1.13% [.] _int_malloc 0.95% 0.00% [.] __strchr_sse2 0.89% 1.39% [.] __tsearch 0.76% 0.00% [.] strlen - Fix the dwarf regs table for x86_64, adding a missing % to the "%di" register, noticed with a failing 'perf test bpf' (Arnaldo Carvalho de Melo) - Fix handling of mmap parameters in the 'perf trace' beautifier in architectures that don't have the same mappings as x86_64 (Wang Nan) - Handle hugetbl mappings in older systems running new kernels (Wang Nan) - Resolve 'call' operands in 'annotate', that when using /proc/kcore were appearing just as hexadecimal addresses, to function names (Arnaldo Carvalho de Melo) - Fix width computation for srcline sort entry (Jiri Olsa) - Do not ignore call instruction with indirect target in 'annotate' (Ravi Bangoria) - Handle MADV_FREE in the madvise 'trace' beautifier (Wang Nan) - Fix build of 'perf trace' mman beautifier in !x86_64 (Wang Nan) Infrastructure changes: - Add infrastructure for PMU specific configuration, allowing to pass config variables directly to the kernel PMU driver, prefixing those variables with a '@', part of a larger series to support Coresight (Mathieu Poirier) Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20irqchip/mips-gic: Fix local interruptsPaul Burton1-55/+50
Since the device hierarchy domain was added by commit c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain"), GIC local interrupts have been broken. Users attempting to setup a per-cpu local IRQ, for example the GIC timer clock events code in drivers/clocksource/mips-gic-timer.c, the setup_percpu_irq function would refuse with -EINVAL because the GIC irqchip driver never called irq_set_percpu_devid so the IRQ_PER_CPU_DEVID flag was never set for the IRQ. This happens because irq_set_percpu_devid was being called from the gic_irq_domain_map function which is no longer called. Doing only that runs into further problems because gic_dev_domain_alloc set the struct irq_chip for all interrupts, local or shared, to gic_level_irq_controller despite that only being suitable for shared interrupts. The typical outcome of this is that gic_level_irq_controller callback functions are called for local interrupts, and then hwirq number calculations overflow & the driver ends up attempting to access some invalid register with an address calculated from an invalid hwirq number. Best case scenario is that this then leads to a bus error. This is fixed by abstracting the setup of the hwirq & chip to a new function gic_setup_dev_chip which is used by both the root GIC IRQ domain & the device domain. Finally, decoding local interrupts failed because gic_dev_domain_alloc only called irq_domain_alloc_irqs_parent for shared interrupts. Local ones were therefore never associated with hwirqs in the root GIC IRQ domain and the virq in gic_handle_local_int would always be 0. This is fixed by calling irq_domain_alloc_irqs_parent unconditionally & having gic_irq_domain_alloc handle both local & shared interrupts, which is easy due to the aforementioned abstraction of chip setup into gic_setup_dev_chip. This fixes use of the MIPS GIC timer for clock events, which has been broken since c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") but hadn't been noticed due to a silent fallback to the MIPS coprocessor 0 count/compare clock events device. Fixes: c98c1822ee13 ("irqchip/mips-gic: Add device hierarchy domain") Signed-off-by: Paul Burton <[email protected]> Cc: [email protected] Cc: Jason Cooper <[email protected]> Cc: Qais Yousef <[email protected]> Cc: [email protected] Cc: Marc Zyngier <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2016-09-20fs/proc/kcore.c: Add bounce buffer for ktext dataJiri Olsa1-1/+6
We hit hardened usercopy feature check for kernel text access by reading kcore file: usercopy: kernel memory exposure attempt detected from ffffffff8179a01f (<kernel text>) (4065 bytes) kernel BUG at mm/usercopy.c:75! Bypassing this check for kcore by adding bounce buffer for ktext data. Reported-by: Steve Best <[email protected]> Fixes: f5509cc18daa ("mm: Hardened usercopy") Suggested-by: Kees Cook <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-09-20fs/proc/kcore.c: Make bounce buffer global for readJiri Olsa1-10/+14
Next patch adds bounce buffer for ktext area, so it's convenient to have single bounce buffer for both vmalloc/module and ktext cases. Suggested-by: Linus Torvalds <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Kees Cook <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2016-09-20perf symbols: Do not open device filesJiri Olsa1-0/+3
The dso__read_binary_type_filename gets the dso's file name to open. We need to check it for regular file before trying to open it, otherwise we might get stuck with device file. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/20160920161245.GA8995@krava Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20perf hists: Factor out hists__reset_column_width()Namhyung Kim4-18/+20
The stdio and tui has same code to reset hpp format column width. Factor it out as a new function. Suggested-and-Acked-by: Jiri Olsa <[email protected]> Signed-off-by: Namhyung Kim <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20perf ui/tui: Reset output width for hierarchyNamhyung Kim1-0/+6
When --hierarchy option is used, each entry has its own hpp_list to show the result. But it missed to update width of each column. Before: - 46.29% 48.12% netctl-auto + 31.44% 29.25% [kernel.vmlinux] + 8.52% 11.55% libc-2.22.so + 5.19% 6.91% bash + 10.75% 11.83% wpa_cli + 8.25% 2.23% swapper + 6.45% 5.40% tr + 4.81% 8.09% awk + 4.15% 2.85% firefox + 3.86% 2.53% sh After: - 46.29% 48.12% netctl-auto + 31.44% 29.25% [kernel.vmlinux] + 8.52% 11.55% libc-2.22.so + 5.19% 6.91% bash + 10.75% 11.83% wpa_cli + 8.25% 2.23% swapper + 6.45% 5.40% tr + 4.81% 8.09% awk + 4.15% 2.85% firefox + 3.86% 2.53% sh Committer note: Full testing instructions: 1) Record with an event group: $ perf record -e '{cycles,instructions}' make -j4 2) Use report in hierarchy mode, to get a few expanded trees on the same screen, use --percent-limit: $ perf report --hierarchy --percent-limit 0.5 Samples: 103K of event 'anon group { cycles:u, instructions:u }', Event count (approx.): 57317631725 Overhead Command / Shared Object / Symbol ◆ - 58.89% 55.12% cc1 ▒ - 50.26% 48.10% cc1 ▒ 3.61% 5.13% [.] _cpp_lex_token ▒ 2.58% 0.78% [.] ht_lookup_with_hash ▒ 1.31% 1.30% [.] ggc_internal_alloc ▒ 1.08% 2.25% [.] get_combined_adhoc_loc ▒ 1.01% 1.95% [.] ira_init ▒ 0.96% 1.78% [.] linemap_position_for_column ▒ 0.65% 1.01% [.] cpp_get_token_with_location ▒ - 7.52% 6.58% libc-2.23.so ▒ 1.70% 1.78% [.] _int_malloc ▒ 0.69% 0.75% [.] _int_free ▒ 0.67% 0.42% [.] malloc_consolidate ▒ - 0.58% 0.42% ld-2.23.so ▒ no entry >= 0.50% ▒ - 0.52% 0.03% [kernel.vmlinux] ▒ no entry >= 0.50% ▒ Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Peter Zijlstra <[email protected]> Fixes: 1b2dbbf41a0f ("perf hists: Use own hpp_list for hierarchy mode") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20perf annotate: Resolve 'call' operands to function namesArnaldo Carvalho de Melo1-2/+6
Before this patch the '_raw_spin_lock_irqsave' and 'update_rq_clock' operands were appearing just as hexadecimal numbers: update_blocked_averages /proc/kcore │ push %r12 │ push %rbx │ and $0xfffffffffffffff0,%rsp │ sub $0x40,%rsp │ add -0x662cac00(,%rdi,8),%rax │ mov %rax,%rbx │ mov %rax,%rdi │ mov %rax,0x38(%rsp) │ → callq _raw_spin_lock_irqsave │ mov %rbx,%rdi │ mov %rax,0x30(%rsp) │ → callq update_rq_clock │ mov 0x8d0(%rbx),%rax │ lea 0x8d0(%rbx),%r11 To check that all is right one can always use the 'o' hotkey and see the original objdump -dS output, that for this case is: update_blocked_averages /proc/kcore │ffffffff990d5489: push %r12 │ffffffff990d548b: push %rbx │ffffffff990d548c: and $0xfffffffffffffff0,%rsp │ffffffff990d5490: sub $0x40,%rsp │ffffffff990d5494: add -0x662cac00(,%rdi,8),%rax │ffffffff990d549c: mov %rax,%rbx │ffffffff990d549f: mov %rax,%rdi │ffffffff990d54a2: mov %rax,0x38(%rsp) │ffffffff990d54a7: → callq 0xffffffff997eb7a0 │ffffffff990d54ac: mov %rbx,%rdi │ffffffff990d54af: mov %rax,0x30(%rsp) │ffffffff990d54b4: → callq 0xffffffff990c7720 │ffffffff990d54b9: mov 0x8d0(%rbx),%rax │ffffffff990d54c0: lea 0x8d0(%rbx),%r11 Use the 'h' hotkey to see a list of available hotkeys. More work needed to cover operands for other instructions, such as 'mov', that can resolve variable names, etc. Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Chris Riyder <[email protected]> Cc: David Ahern <[email protected]> Cc: Hemant Kumar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Markus Trippelsdorf <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Russell King <[email protected]> Cc: Taeung Song <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20perf annotate: Pass the symbol's map/dso to the instruction parsersArnaldo Carvalho de Melo2-12/+13
So that things like: → callq 0xffffffff993e3230 found while disassembling /proc/kcore can be beautified by later patches, that will resolve that address to a function, looking it up in /proc/kallsyms. Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Chris Riyder <[email protected]> Cc: David Ahern <[email protected]> Cc: Hemant Kumar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Markus Trippelsdorf <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Russell King <[email protected]> Cc: Taeung Song <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20perf annotate: Do not ignore call instruction with indirect targetRavi Bangoria1-6/+2
Do not ignore call instruction with indirect target when its already identified as a call. This is an extension of commit e8ea1561952b ("perf annotate: Use raw form for register indirect call instructions") to generalize annotation for all instructions with indirect calls. This is needed for certain powerpc call instructions that use address in a register (such as bctrl, btarl, ...). Apart from that, when kcore is used to disassemble function, all call instructions were ignored. This patch will fix it as a side effect by not ignoring them. For example, Before (with kcore): mov %r13,%rdi callq 0xffffffff811a7e70 ^ jmpq 64 mov %gs:0x7ef41a6e(%rip),%al After (with kcore): mov %r13,%rdi > callq 0xffffffff811a7e70 ^ jmpq 64 mov %gs:0x7ef41a6e(%rip),%al Suggested-by: Michael Ellerman <[email protected]> [Suggested about 'bctrl' instruction] Signed-off-by: Ravi Bangoria <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Chris Riyder <[email protected]> Cc: Hemant Kumar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Markus Trippelsdorf <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Russell King <[email protected]> Cc: Taeung Song <[email protected]> Link: http://lkml.kernel.org/r/1471611578-11255-5-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20perf hists: Fix width computation for srcline sort entryJiri Olsa2-2/+5
Adding header size to width computation for srcline sort entry, because it's possible to get empty data with ':0' which set width of 2 which is lower than width needed to display column header. Signed-off-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Don Zickus <[email protected]> Cc: Joe Mario <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] [ Added declaration to sort.h ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2016-09-20Merge tag 'efi-next' of ↵Ingo Molnar2-1/+16
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/core Pull EFI fix from Matt Fleming: * Fix a boot crash reported by Mike Galbraith and Mike Krinkin. The new EFI memory map reservation code didn't align reservations to EFI_PAGE_SIZE boundaries causing bogus regions to be inserted into the global EFI memory map (Matt Fleming) Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20Merge branch 'efi/urgent' into efi/core, to pick up fixesIngo Molnar449-2472/+3719
Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20Merge tag 'efi-urgent' of ↵Ingo Molnar2-11/+12
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/urgent Pull EFI fixes from Matt Fleming: * Fix a boot hang on large memory machines (multiple terabyte) caused by type conversion errors in the x86 PAT code (Matt Fleming) Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20x86/efi: Round EFI memmap reservations to EFI_PAGE_SIZEMatt Fleming2-1/+16
Mike Galbraith reported that his machine started rebooting during boot after, commit 8e80632fb23f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()") The ESRT table on his machine is 56 bytes and at no point in the efi_arch_mem_reserve() call path is that size rounded up to EFI_PAGE_SIZE, nor is the start address on an EFI_PAGE_SIZE boundary. Since the EFI memory map only deals with whole pages, inserting an EFI memory region with 56 bytes results in a new entry covering zero pages, and completely screws up the calculations for the old regions that were trimmed. Round all sizes upwards, and start addresses downwards, to the nearest EFI_PAGE_SIZE boundary. Additionally, efi_memmap_insert() expects the mem::range::end value to be one less than the end address for the region. Reported-by: Mike Galbraith <[email protected]> Reported-by: Mike Krinkin <[email protected]> Tested-by: Mike Krinkin <[email protected]> Cc: Peter Jones <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Taku Izumi <[email protected]> Signed-off-by: Matt Fleming <[email protected]>
2016-09-20perf/x86/intel/bts: Make sure debug store is validSebastian Andrzej Siewior1-1/+1
Since commit 4d4c47412464 ("perf/x86/intel/bts: Fix BTS PMI detection") my box goes boom on boot: | .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 | BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 | IP: [<ffffffff8100c463>] intel_bts_interrupt+0x43/0x130 | Call Trace: | <NMI> d [<ffffffff8100b341>] intel_pmu_handle_irq+0x51/0x4b0 | [<ffffffff81004d47>] perf_event_nmi_handler+0x27/0x40 This happens because the code introduced in this commit dereferences the debug store pointer unconditionally. The debug store is not guaranteed to be available, so a NULL pointer check as on other places is required. Fixes: 4d4c47412464 ("perf/x86/intel/bts: Fix BTS PMI detection") Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2016-09-20x86/efi: Only map RAM into EFI page tables if in mixed-modeMatt Fleming1-1/+1
Waiman reported that booting with CONFIG_EFI_MIXED enabled on his multi-terabyte HP machine results in boot crashes, because the EFI region mapping functions loop forever while trying to map those regions describing RAM. While this patch doesn't fix the underlying hang, there's really no reason to map EFI_CONVENTIONAL_MEMORY regions into the EFI page tables when mixed-mode is not in use at runtime. Reported-by: Waiman Long <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> CC: Theodore Ts'o <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Scott J Norton <[email protected]> Cc: Douglas Hatch <[email protected]> Cc: <[email protected]> # v4.6+ Signed-off-by: Matt Fleming <[email protected]>
2016-09-20x86/mm/pat: Prevent hang during boot when mapping pagesMatt Fleming1-10/+11
There's a mixture of signed 32-bit and unsigned 32-bit and 64-bit data types used for keeping track of how many pages have been mapped. This leads to hangs during boot when mapping large numbers of pages (multiple terabytes, as reported by Waiman) because those values are interpreted as being negative. commit 742563777e8d ("x86/mm/pat: Avoid truncation when converting cpa->numpages to address") fixed one of those bugs, but there is another lurking in __change_page_attr_set_clr(). Additionally, the return value type for the populate_*() functions can return negative values when a large number of pages have been mapped, triggering the error paths even though no error occurred. Consistently use 64-bit types on 64-bit platforms when counting pages. Even in the signed case this gives us room for regions 8PiB (pebibytes) in size whilst still allowing the usual negative value error checking idiom. Reported-by: Waiman Long <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> CC: Theodore Ts'o <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Scott J Norton <[email protected]> Cc: Douglas Hatch <[email protected]> Signed-off-by: Matt Fleming <[email protected]>
2016-09-20qed: Fix stack corruption on probeYuval Mintz1-2/+2
Commit fe56b9e6a8d95 ("qed: Add module with basic common support") has introduced a stack corruption during probe, where filling a local struct with data to be sent to management firmware is incorrectly filled; The data is written outside of the struct and corrupts the stack. Changes from v1: ---------------- - Correct the value written [Caught by David Laight] Fixes: fe56b9e6a8d95 ("qed: Add module with basic common support") Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-09-20arm64: migrate exception table users off module.h and onto extable.hPaul Gortmaker3-3/+3
These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. Cc: Catalin Marinas <[email protected]> Acked-by: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Signed-off-by: Paul Gortmaker <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2016-09-20MAINTAINERS: Add an entry for the core network DSA codeAndrew Lunn1-0/+9
The core distributed switch architecture code currently does not have a MAINTAINERS entry, which results in some contributions not landing in the right peoples inbox. Signed-off-by: Andrew Lunn <[email protected]> Acked-by: Florian Fainelli <[email protected]> Acked-by: Vivien Didelot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-09-20net: ipv6: fallback to full lookup if table lookup is unsuitableVincent Bernat1-1/+10
Commit 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") introduced a regression: insertion of an IPv6 route in a table not containing the appropriate connected route for the gateway but which contained a non-connected route (like a default gateway) fails while it was previously working: $ ip link add eth0 type dummy $ ip link set up dev eth0 $ ip addr add 2001:db8::1/64 dev eth0 $ ip route add ::/0 via 2001:db8::5 dev eth0 table 20 $ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20 RTNETLINK answers: No route to host $ ip -6 route show table 20 default via 2001:db8::5 dev eth0 metric 1024 pref medium After this patch, we get: $ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20 $ ip -6 route show table 20 2001:db8:cafe::1 via 2001:db8::6 dev eth0 metric 1024 pref medium default via 2001:db8::5 dev eth0 metric 1024 pref medium Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Signed-off-by: Vincent Bernat <[email protected]> Acked-by: David Ahern <[email protected]> Tested-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-09-20x86/dumpstack: Remove dump_trace() and related callbacksJosh Poimboeuf4-226/+0
All previous users of dump_trace() have been converted to use the new unwind interfaces, so we can remove it and the related print_context_stack() and print_context_stack_bp() callback functions. Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Byungchul Park <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Nilay Vaish <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/5b97da3572b40b5a4d8e185cf2429308d0987a13.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinderJosh Poimboeuf4-47/+107
Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Byungchul Park <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Nilay Vaish <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20oprofile/x86: Convert x86_backtrace() to use the new unwinderJosh Poimboeuf1-22/+17
Convert oprofile's x86_backtrace() to use the new unwinder. dump_trace() has been deprecated. Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Byungchul Park <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Nilay Vaish <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Robert Richter <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/412df8927705795e8ea60cffcf89a79e010713b1.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20x86/stacktrace: Convert save_stack_trace_*() to use the new unwinderJosh Poimboeuf1-45/+29
Convert save_stack_trace_*() to use the new unwinder. dump_trace() has been deprecated. Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Byungchul Park <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Nilay Vaish <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/815494c627d89887db0ce56ceffd58ad16ee6c21.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20perf/x86: Convert perf_callchain_kernel() to use the new unwinderJosh Poimboeuf1-23/+10
Convert perf_callchain_kernel() to use the new unwinder. dump_trace() has been deprecated. Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Byungchul Park <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Nilay Vaish <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/a2df0c4f09b3d438e11b41681f10b0775a819a7f.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20x86/unwind: Add new unwind interface and implementationsJosh Poimboeuf4-0/+215
The x86 stack dump code is a bit of a mess. dump_trace() uses callbacks, and each user of it seems to have slightly different requirements, so there are several slightly different callbacks floating around. Also there are some upcoming features which will need more changes to the stack dump code, including the printing of stack pt_regs, reliable stack detection for live patching, and a DWARF unwinder. Each of those features would at least need more callbacks and/or callback interfaces, resulting in a much bigger mess than what we have today. Before doing all that, we should try to clean things up and replace dump_trace() with something cleaner and more flexible. The new unwinder is a simple state machine which was heavily inspired by a suggestion from Andy Lutomirski: https://lkml.kernel.org/r/CALCETrUbNTqaM2LRyXGRx=kVLRPeY5A3Pc6k4TtQxF320rUT=w@mail.gmail.com It's also similar to the libunwind API: http://www.nongnu.org/libunwind/man/libunwind(3).html Some if its advantages: - Simplicity: no more callback sprawl and less code duplication. - Flexibility: it allows the caller to stop and inspect the stack state at each step in the unwinding process. - Modularity: the unwinder code, console stack dump code, and stack metadata analysis code are all better separated so that changing one of them shouldn't have much of an impact on any of the others. Two implementations are added which conform to the new unwind interface: - The frame pointer unwinder which is used for CONFIG_FRAME_POINTER=y. - The "guess" unwinder which is used for CONFIG_FRAME_POINTER=n. This isn't an "unwinder" per se. All it does is scan the stack for kernel text addresses. But with no frame pointers, guesses are better than nothing in most cases. Suggested-by: Andy Lutomirski <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Byungchul Park <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Kees Cook <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Nilay Vaish <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/6dc2f909c47533d213d0505f0a113e64585bec82.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20Merge branch 'linus' into x86/asm, to pick up fixesIngo Molnar136-835/+1224
Signed-off-by: Ingo Molnar <[email protected]>
2016-09-20locking/rwsem, x86: Drop a bogus cc clobberJan Beulich1-1/+1
With the addition of uses of GCC's condition code outputs in commit: 35ccfb7114 ("x86, asm: Use CC_SET()/CC_OUT() in <asm/rwsem.h>") ... there's now an overlap of outputs and clobbers in __down_write_trylock(). Such overlaps are generally getting tagged with an error (occasionally even with an ICE). I can't really tell why plain GCC 6.2 doesn't detect this (judging by the code it is meant to), while the slightly modified one I use does. Since condition code clobbers are never necessary on x86 (other than perhaps for documentation purposes, which doesn't really get done consistently), remove it altogether rather than inventing something like CC_CLOBBER (to accompany CC_SET/CC_OUT). Signed-off-by: Jan Beulich <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.