aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-08-23Merge tag 'drm-fixes-2019-08-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds18-28/+126
Pull drm fixes from Dave Airlie: "Live from the laundromat after my washing machine broke down, we have the 5.3-rc6 fixes. Changelog is in the tag below, but nothing too noteworthy in here: rcar-du: - LVDS dual-link mode fix mediatek: - of node refcount fix - prime buffer import fix - dma max seg fix komeda: - output polling fix - abfc format fix - memory-region DT fix amdgpu: - bpc display fix - ioctl memory leak fix - gfxoff fix - smu warnings fix i915: - HDMI mode readout fix" * tag 'drm-fixes-2019-08-23' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu/powerplay: silence a warning in smu_v11_0_setup_pptable drm/amd/display: Calculate bpc based on max_requested_bpc drm/amdgpu: prevent memory leaks in AMDGPU_CS ioctl drm/amd/amdgpu: disable MMHUB PG for navi10 drm/amd/powerplay: remove duplicate macro smu_get_uclk_dpm_states in amdgpu_smu.h drm/amd/powerplay: fix variable type errors in smu_v11_0_setup_pptable drm/amdgpu/gfx9: update pg_flags after determining if gfx off is possible drm/i915: Fix HW readout for crtc_clock in HDMI mode drm/mediatek: mtk_drm_drv.c: Add of_node_put() before goto drm: rcar_lvds: Fix dual link mode operations drm/mediatek: set DMA max segment size drm/mediatek: use correct device to import PRIME buffers drm/omap: ensure we have a valid dma_mask drm/komeda: Add support for 'memory-region' DT node property drm/komeda: Adds internal bpp computing for arm afbc only format YU08 YU10 drm/komeda: Initialize and enable output polling on Komeda
2019-08-23x86/retpoline: Don't clobber RFLAGS during CALL_NOSPEC on i386Sean Christopherson1-1/+1
Use 'lea' instead of 'add' when adjusting %rsp in CALL_NOSPEC so as to avoid clobbering flags. KVM's emulator makes indirect calls into a jump table of sorts, where the destination of the CALL_NOSPEC is a small blob of code that performs fast emulation by executing the target instruction with fixed operands. adcb_al_dl: 0x000339f8 <+0>: adc %dl,%al 0x000339fa <+2>: ret A major motiviation for doing fast emulation is to leverage the CPU to handle consumption and manipulation of arithmetic flags, i.e. RFLAGS is both an input and output to the target of CALL_NOSPEC. Clobbering flags results in all sorts of incorrect emulation, e.g. Jcc instructions often take the wrong path. Sans the nops... asm("push %[flags]; popf; " CALL_NOSPEC " ; pushf; pop %[flags]\n" 0x0003595a <+58>: mov 0xc0(%ebx),%eax 0x00035960 <+64>: mov 0x60(%ebx),%edx 0x00035963 <+67>: mov 0x90(%ebx),%ecx 0x00035969 <+73>: push %edi 0x0003596a <+74>: popf 0x0003596b <+75>: call *%esi 0x000359a0 <+128>: pushf 0x000359a1 <+129>: pop %edi 0x000359a2 <+130>: mov %eax,0xc0(%ebx) 0x000359b1 <+145>: mov %edx,0x60(%ebx) ctxt->eflags = (ctxt->eflags & ~EFLAGS_MASK) | (flags & EFLAGS_MASK); 0x000359a8 <+136>: mov -0x10(%ebp),%eax 0x000359ab <+139>: and $0x8d5,%edi 0x000359b4 <+148>: and $0xfffff72a,%eax 0x000359b9 <+153>: or %eax,%edi 0x000359bd <+157>: mov %edi,0x4(%ebx) For the most part this has gone unnoticed as emulation of guest code that can trigger fast emulation is effectively limited to MMIO when running on modern hardware, and MMIO is rarely, if ever, accessed by instructions that affect or consume flags. Breakage is almost instantaneous when running with unrestricted guest disabled, in which case KVM must emulate all instructions when the guest has invalid state, e.g. when the guest is in Big Real Mode during early BIOS. Fixes: 776b043848fd2 ("x86/retpoline: Add initial retpoline support") Fixes: 1a29b5b7f347a ("KVM: x86: Make indirect calls in emulator speculation safe") Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-08-23dm table: fix invalid memory accesses with too high sector numberMikulas Patocka1-1/+4
If the sector number is too high, dm_table_find_target() should return a pointer to a zeroed dm_target structure (the caller should test it with dm_target_is_valid). However, for some table sizes, the code in dm_table_find_target() that performs btree lookup will access out of bound memory structures. Fix this bug by testing the sector number at the beginning of dm_table_find_target(). Also, add an "inline" keyword to the function dm_table_get_size() because this is a hot path. Fixes: 512875bd9661 ("dm: table detect io beyond device") Cc: [email protected] Reported-by: Zhang Tao <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2019-08-23drm/komeda: Add missing of_node_get() callMihail Atanassov1-1/+1
komeda_pipeline_destroy has the matching of_node_put(). Fixes: 29e56aec911dd ("drm/komeda: Add DT parsing") Signed-off-by: Mihail Atanassov <[email protected]> Reviewed-by: Ayan Kumar Halder <[email protected]> [Rebased on the latest drm-misc-fixes] Signed-off-by: Ayan Kumar Halder <[email protected]> Link: https://patchwork.freedesktop.org/patch/325278/ Change-Id: I5fa2479d6cb3a77182f1a92833c1c0bca8668cb4
2019-08-23drm/komeda: Clean warning 'komeda_component_add' might be a candidate for ↵james qian wang (Arm Technology China)1-0/+1
'gnu_printf' komeda/komeda_pipeline.c: In function 'komeda_component_add': komeda/komeda_pipeline.c:212:3: warning: function 'komeda_component_add' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format] vsnprintf(c->name, sizeof(c->name), name_fmt, args); ^~~~~~~~~ Signed-off-by: james qian wang (Arm Technology China) <[email protected]> Reviewed-by: Ayan Kumar Halder <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-23drm/komeda: Fix warning -Wunused-but-set-variablejames qian wang (Arm Technology China)1-4/+2
Fixed two -Wunused-but-set-variable warnings: /arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c: In function ‘komeda_crtc_normalize_zpos’: /arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c:150:26: warning: variable ‘fb’ set but not used [-Wunused-but-set-variable] struct drm_framebuffer *fb; ^~ /arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c: In function ‘komeda_kms_check’: /arm/linux/display/aosp-4.14-drm-next/drivers/gpu/drm/arm/display/komeda/komeda_kms.c:209:25: warning: variable ‘old_crtc_st’ set but not used [-Wunused-but-set-variable] struct drm_crtc_state *old_crtc_st, *new_crtc_st; ^~~~~~~~~~~ Signed-off-by: james qian wang (Arm Technology China) <[email protected]> Reviewed-by: Ayan Kumar Halder <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-23drm/komeda: Fix error: not allocating enough data 1592 vs 1584james qian wang (Arm Technology China)1-1/+1
The patch 5d51f6c0da1b: "drm/komeda: Add writeback support" from May 23, 2019, leads to the following static checker warning: drivers/gpu/drm/arm/display/komeda/komeda_wb_connector.c:151 komeda_wb_connector_add() error: not allocating enough data 1592 vs 1584 This is a typo which misuse "wb_conn" but which should be "kwb_conn" to allocate the memory. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: james qian wang (Arm Technology China) <[email protected]> Reviewed-by: Ayan Kumar Halder <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-23ARM: 8897/1: check stmfd instruction using right shiftLvqiang Huang1-1/+1
In the commit ef41b5c92498 ("ARM: make kernel oops easier to read"), - .word 0xe92d0000 >> 10 @ stmfd sp!, {} + .word 0xe92d0000 >> 11 @ stmfd sp!, {} then the shift need to change to 11. Signed-off-by: Lvqiang Huang <[email protected]> Signed-off-by: Chunyan Zhang <[email protected]> Signed-off-by: Russell King <[email protected]>
2019-08-23ARM: 8874/1: mm: only adjust sections of valid mm structuresDoug Berger1-1/+2
A timing hazard exists when an early fork/exec thread begins exiting and sets its mm pointer to NULL while a separate core tries to update the section information. This commit ensures that the mm pointer is not NULL before setting its section parameters. The arguments provided by commit 11ce4b33aedc ("ARM: 8672/1: mm: remove tasklist locking from update_sections_early()") are equally valid for not requiring grabbing the task_lock around this check. Fixes: 08925c2f124f ("ARM: 8464/1: Update all mm structures with section adjustments") Signed-off-by: Doug Berger <[email protected]> Acked-by: Laura Abbott <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Florian Fainelli <[email protected]> Cc: Rob Herring <[email protected]> Cc: "Steven Rostedt (VMware)" <[email protected]> Cc: Peng Fan <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Signed-off-by: Russell King <[email protected]>
2019-08-23gpio: Fix irqchip initialization orderLinus Walleij1-15/+15
The new API for registering a gpio_irq_chip along with a gpio_chip has a different semantic ordering than the old API which added the irqchip explicitly after registering the gpio_chip. Move the calls to add the gpio_irq_chip *last* in the function, so that the different hooks setting up OF and ACPI and machine gpio_chips are called *before* we try to register the interrupts, preserving the elder semantic order. This cropped up in the PL061 driver which used to work fine with no special ACPI quirks, but started to misbehave using the new API. Fixes: e0d897289813 ("gpio: Implement tighter IRQ chip integration") Cc: Thierry Reding <[email protected]> Cc: Grygorii Strashko <[email protected]> Cc: Andy Shevchenko <[email protected]> Reported-by: Wei Xu <[email protected]> Tested-by: Wei Xu <[email protected]> Reported-by: Andy Shevchenko <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-08-23drm/virtio: use virtio_max_dma_sizeGerd Hoffmann1-2/+8
We must make sure our scatterlist segments are not too big, otherwise we might see swiotlb failures (happens with sev, also reproducable with swiotlb=force). Suggested-by: Laszlo Ersek <[email protected]> Signed-off-by: Gerd Hoffmann <[email protected]> Reviewed-by: Laszlo Ersek <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-23drm/omap: Fix port lookup for SDI outputLaurent Pinchart1-1/+3
When refactoring port lookup for DSS outputs, commit d17eb4537a7e ("drm/omap: Factor out common init/cleanup code for output devices") incorrectly hardcoded usage of DT port 0. This breaks operation for SDI (which uses the DT port 1) and DPI outputs other than DPI0 (which are not used in mainline DT sources). Fix this by using the port number from the output omap_dss_device of_ports field. Fixes: d17eb4537a7e ("drm/omap: Factor out common init/cleanup code for output devices") Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Tested-by: Aaro Koskinen <[email protected]>
2019-08-23drm/qxl: get vga ioportsGerd Hoffmann1-1/+19
qxl has two modes: "native" (used by the drm driver) and "vga" (vga compatibility mode, typically used for boot display and firmware framebuffers). Accessing any vga ioport will switch the qxl device into vga mode. The qxl driver never does that, but other drivers accessing vga ports can trigger that too and therefore disturb qxl operation. So aquire the legacy vga ioports from vgaarb to avoid that. Reproducer: Boot kvm guest with both qxl and i915 vgpu, with qxl being first in pci scan order. v2: Skip this for secondary qxl cards which don't have vga mode in the first place (Frediano). Cc: Frediano Ziglio <[email protected]> Signed-off-by: Gerd Hoffmann <[email protected]> Reviewed-by: Dave Airlie <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-22xfs: fix missing ILOCK unlock when xfs_setattr_nonsize fails due to EDQUOTDarrick J. Wong1-0/+1
Benjamin Moody reported to Debian that XFS partially wedges when a chgrp fails on account of being out of disk quota. I ran his reproducer script: # adduser dummy # adduser dummy plugdev # dd if=/dev/zero bs=1M count=100 of=test.img # mkfs.xfs test.img # mount -t xfs -o gquota test.img /mnt # mkdir -p /mnt/dummy # chown -c dummy /mnt/dummy # xfs_quota -xc 'limit -g bsoft=100k bhard=100k plugdev' /mnt (and then as user dummy) $ dd if=/dev/urandom bs=1M count=50 of=/mnt/dummy/foo $ chgrp plugdev /mnt/dummy/foo and saw: ================================================ WARNING: lock held when returning to user space! 5.3.0-rc5 #rc5 Tainted: G W ------------------------------------------------ chgrp/47006 is leaving the kernel with locks still held! 1 lock held by chgrp/47006: #0: 000000006664ea2d (&xfs_nondir_ilock_class){++++}, at: xfs_ilock+0xd2/0x290 [xfs] ...which is clearly caused by xfs_setattr_nonsize failing to unlock the ILOCK after the xfs_qm_vop_chown_reserve call fails. Add the missing unlock. Reported-by: [email protected] Fixes: 253f4911f297 ("xfs: better xfs_trans_alloc interface") Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Tested-by: Salvatore Bonaccorso <[email protected]>
2019-08-23Merge branch 'linux-5.3' of git://github.com/skeggsb/linux into drm-fixesDave Airlie1-7/+17
Fixes i2c on DP with some docks. Signed-off-by: Dave Airlie <[email protected]> From: Ben Skeggs <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv713t2_BQ44gVV7Lqic6Vwmhq0r4FB5v-t0kD1jzFrbmQ@mail.gmail.com
2019-08-23drm/nouveau: Don't retry infinitely when receiving no data on i2c over AUXLyude Paul1-7/+17
While I had thought I had fixed this issue in: commit 342406e4fbba ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") It turns out that while I did fix the error messages I was seeing on my P50 when trying to access i2c busses with the GPU in runtime suspend, I accidentally had missed one important detail that was mentioned on the bug report this commit was supposed to fix: that the CPU would only lock up when trying to access i2c busses _on connected devices_ _while the GPU is not in runtime suspend_. Whoops. That definitely explains why I was not able to get my machine to hang with i2c bus interactions until now, as plugging my P50 into it's dock with an HDMI monitor connected allowed me to finally reproduce this locally. Now that I have managed to reproduce this issue properly, it looks like the problem is much simpler then it looks. It turns out that some connected devices, such as MST laptop docks, will actually ACK i2c reads even if no data was actually read: [ 275.063043] nouveau 0000:01:00.0: i2c: aux 000a: 1: 0000004c 1 [ 275.063447] nouveau 0000:01:00.0: i2c: aux 000a: 00 01101000 10040000 [ 275.063759] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000001 [ 275.064024] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000 [ 275.064285] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000 [ 275.064594] nouveau 0000:01:00.0: i2c: aux 000a: rd 00000000 Because we don't handle the situation of i2c ack without any data, we end up entering an infinite loop in nvkm_i2c_aux_i2c_xfer() since the value of cnt always remains at 0. This finally properly explains how this could result in a CPU hang like the ones observed in the aforementioned commit. So, fix this by retrying transactions if no data is written or received, and give up and fail the transaction if we continue to not write or receive any data after 32 retries. Signed-off-by: Lyude Paul <[email protected]> Cc: [email protected] Signed-off-by: Ben Skeggs <[email protected]>
2019-08-22net/ncsi: Fix the payload copying for the request coming from Netlink[email protected]1-2/+9
The request coming from Netlink should use the OEM generic handler. The standard command handler expects payload in bytes/words/dwords but the actual payload is stored in data if the request is coming from Netlink. Signed-off-by: Justin Lee <[email protected]> Reviewed-by: Vijay Khemka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-23drm/amdgpu/powerplay: silence a warning in smu_v11_0_setup_pptableAlex Deucher1-1/+1
I think gcc is confused as I don't see how size could be used unitialized, but go ahead and silence the warning. Signed-off-by: Alex Deucher <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-23Merge tag 'drm-misc-fixes-2019-08-22' of ↵Dave Airlie6-3/+40
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v5.3-rc6: - dma fix for omap. - Make output polling work on komeda. - Fix bpp computing for AFBC formats in komeda. - Support the memory-region property in komeda. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-23Merge tag 'drm-intel-fixes-2019-08-22' of ↵Dave Airlie2-3/+3
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.3-rc6: - fix hardware state readout for 10 bpc HDMI Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-08-23timekeeping/vsyscall: Prevent math overflow in BOOTTIME updateThomas Gleixner3-9/+23
The VDSO update for CLOCK_BOOTTIME has a overflow issue as it shifts the nanoseconds based boot time offset left by the clocksource shift. That overflows once the boot time offset becomes large enough. As a consequence CLOCK_BOOTTIME in the VDSO becomes a random number causing applications to misbehave. Fix it by storing a timespec64 representation of the offset when boot time is adjusted and add that to the MONOTONIC base time value in the vdso data page. Using the timespec64 representation avoids a 64bit division in the update code. Fixes: 44f57d788e7d ("timekeeping: Provide a generic update_vsyscall() implementation") Reported-by: Chris Clayton <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Chris Clayton <[email protected]> Tested-by: Vincenzo Frascino <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-08-22Merge tag 'wireless-drivers-for-davem-2019-08-21' of ↵David S. Miller9-19/+93
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.3 Third set of fixes for 5.3, and most likely the last one. The rt2x00 regression has been reported multiple times, others are of lower priority. mt76 * fix hang on resume on certain machines rt2x00 * fix AP mode regression related to encryption iwlwifi * avoid unnecessary error messages due to multicast frames when not associated * fix configuration for ax201 devices * fix recognition of QuZ devices ==================== Signed-off-by: David S. Miller <[email protected]>
2019-08-22qed: Add cleanup in qed_slowpath_start()Wenwen Wang1-1/+3
If qed_mcp_send_drv_version() fails, no cleanup is executed, leading to memory leaks. To fix this issue, introduce the label 'err4' to perform the cleanup work before returning the error. Signed-off-by: Wenwen Wang <[email protected]> Acked-by: Sudarsana Reddy Kalluru <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-22ocelot_ace: fix action of trapYangbo Lu1-1/+1
The trap action should be copying the frame to CPU and dropping it for forwarding, but current setting was just copying frame to CPU. Fixes: b596229448dd ("net: mscc: ocelot: Add support for tcam") Signed-off-by: Yangbo Lu <[email protected]> Acked-by: Allan W. Nielsen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-08-23um: fix time travel modeJohannes Berg3-12/+20
Unfortunately, my build fix for when time travel mode isn't enabled broke time travel mode, because I forgot that we need to use the timer time after the timer has been marked disabled, and thus need to leave the time stored instead of zeroing it. Fix that by splitting the inline into two, so we can call only the _mode() one in the relevant code path. Fixes: b482e48d29f1 ("um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-08-22io_uring: add need_resched() check in inner poll loopJens Axboe1-1/+7
The outer poll loop checks for whether we need to reschedule, and returns to userspace if we do. However, it's possible to get stuck in the inner loop as well, if the CPU we are running on needs to reschedule to finish the IO work. Add the need_resched() check in the inner loop as well. This fixes a potential hang if the kernel is configured with CONFIG_PREEMPT_VOLUNTARY=y. Reported-by: Sagi Grimberg <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Tested-by: Sagi Grimberg <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-08-22Merge tag 'pci-v5.3-fixes-1' of ↵Linus Torvalds3-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Reset both NVIDIA GPU and HDA in ThinkPad P50 quirk, which was broken by another quirk that enabled the HDA device (Lyude Paul) - Fix pciebus-howto.rst documentation filename typo (Bjorn Helgaas) * tag 'pci-v5.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Documentation PCI: Fix pciebus-howto.rst filename typo PCI: Reset both NVIDIA GPU and HDA in ThinkPad P50 workaround
2019-08-22net/mlx5e: Remove ethernet segment from dump WQEEran Ben Elisha1-16/+10
Dump WQE shall not include Ethernet segment. Define mlx5e_dump_wqe to be used for "Dump WQEs" instead of sharing it with the general mlx5e_tx_wqe layout. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-08-22net/mlx5e: Add num bytes metadata to WQE infoEran Ben Elisha1-5/+7
For TLS WQEs, metadata info did not include num_bytes. Due to this issue, tx_tls_dump_bytes counter did not increment. Modify tx_fill_wi() to fill num bytes. When it is called for non-traffic WQE, zero is expected. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-08-22net/mlx5: Fix delay in fw fatal report handling due to fw reportMoshe Shemesh1-9/+10
When fw fatal error occurs, poll health() first detects and reports on a fw error. Afterwards, it detects and reports on the fw fatal error itself. That can cause a long delay in fw fatal error handling which waits in a queue for the fw error handling to be finished. The fw error handle will try asking for fw core dump command while fw in fatal state may not respond and driver will wait for command timeout. Changing the flow to detect and handle first fw fatal errors and only if no fatal error detected look for a fw error to handle. Fixes: d1bf0e2cc4a6 ("net/mlx5: Report devlink health on FW issues") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-08-22net/mlx5: Fix crdump chunks printMoshe Shemesh1-1/+2
Crdump repeats itself every chunk of 256bytes. That is due to bug of missing progressing offset while copying the data from buffer to devlink_fmsg. Fixes: 9b1f29823605 ("net/mlx5: Add support for FW fatal reporter dump") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-08-22dm space map metadata: fix missing store of apply_bops() return valueZhangXiaoxu1-1/+1
In commit 6096d91af0b6 ("dm space map metadata: fix occasional leak of a metadata block on resize"), we refactor the commit logic to a new function 'apply_bops'. But when that logic was replaced in out() the return value was not stored. This may lead out() returning a wrong value to the caller. Fixes: 6096d91af0b6 ("dm space map metadata: fix occasional leak of a metadata block on resize") Cc: [email protected] Signed-off-by: ZhangXiaoxu <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2019-08-22dm btree: fix order of block initialization in btree_split_beneathZhangXiaoxu1-15/+16
When btree_split_beneath() splits a node to two new children, it will allocate two blocks: left and right. If right block's allocation failed, the left block will be unlocked and marked dirty. If this happened, the left block'ss content is zero, because it wasn't initialized with the btree struct before the attempot to allocate the right block. Upon return, when flushing the left block to disk, the validator will fail when check this block. Then a BUG_ON is raised. Fix this by completely initializing the left block before allocating and initializing the right block. Fixes: 4dcb8b57df359 ("dm btree: fix leak of bufio-backed block in btree_split_beneath error path") Cc: [email protected] Signed-off-by: ZhangXiaoxu <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2019-08-22Merge tag 'Wimplicit-fallthrough-5.3-rc6' of ↵Linus Torvalds10-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull more fallthrough fixes from Gustavo A. R. Silva: "Fix fall-through warnings on arm and mips for multiple configurations" * tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: video: fbdev: acornfb: Mark expected switch fall-through scsi: libsas: sas_discover: Mark expected switch fall-through MIPS: Octeon: Mark expected switch fall-through power: supply: ab8500_charger: Mark expected switch fall-through watchdog: wdt285: Mark expected switch fall-through mtd: sa1100: Mark expected switch fall-through drm/sun4i: tcon: Mark expected switch fall-through drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through ARM: riscpc: Mark expected switch fall-through dmaengine: fsldma: Mark expected switch fall-through
2019-08-22Merge tag 'tag-chrome-platform-fixes-for-v5.3-rc6' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fix from Benson Leung: "Fix a kernel crash during suspend/resume of cros_ec_ishtp" * tag 'tag-chrome-platform-fixes-for-v5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_ishtp: fix crash during suspend
2019-08-22Merge tag 'afs-fixes-20190822' of ↵Linus Torvalds3-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: - Fix a cell record leak due to the default error not being cleared. - Fix an oops in tracepoint due to a pointer that may contain an error. - Fix the ACL storage op for YFS where the wrong op definition is being used. By luck, this only actually affects the information appearing in traces. * tag 'afs-fixes-20190822' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: use correct afs_call_type in yfs_fs_store_opaque_acl2 afs: Fix possible oops in afs_lookup trace event afs: Fix leak in afs_lookup_cell_rcu()
2019-08-22ubifs: Limit the number of pages in shrink_liabilityLiu Song1-1/+1
If the number of dirty pages to be written back is large, then writeback_inodes_sb will block waiting for a long time, causing hung task detection alarm. Therefore, we should limit the maximum number of pages written back this time, which let the budget be completed faster. The remaining dirty pages tend to rely on the writeback mechanism to complete the synchronization. Fixes: b6e51316daed ("writeback: separate starting of sync vs opportunistic writeback") Signed-off-by: Liu Song <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-08-22ubifs: Correctly initialize c->min_log_bytesRichard Weinberger1-0/+4
Currently on a freshly mounted UBIFS, c->min_log_bytes is 0. This can lead to a log overrun and make commits fail. Recent kernels will report the following assert: UBIFS assert failed: c->lhead_lnum != c->ltail_lnum, in fs/ubifs/log.c:412 c->min_log_bytes can have two states, 0 and c->leb_size. It controls how much bytes of the log area are reserved for non-bud nodes such as commit nodes. After a commit it has to be set to c->leb_size such that we have always enough space for a commit. While a commit runs it can be 0 to make the remaining bytes of the log available to writers. Having it set to 0 right after mount is wrong since no space for commits is reserved. Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Reported-and-tested-by: Uwe Kleine-König <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-08-22ubifs: Fix double unlock around orphan_delete()Richard Weinberger1-2/+0
We unlock after orphan_delete(), so no need to unlock in the function too. Reported-by: Han Xu <[email protected]> Fixes: 8009ce956c3d ("ubifs: Don't leak orphans on memory during commit") Signed-off-by: Richard Weinberger <[email protected]>
2019-08-22jffs2: Remove C++ style comments from uapi headerMasahiro Yamada1-5/+0
Linux kernel tolerates C++ style comments these days. Actually, the SPDX License tags for .c files start with //. On the other hand, uapi headers are written in more strict C, where the C++ comment style is forbidden. I simply dropped these lines instead of fixing the comment style. This code has been always commented out since it was added around Linux 2.4.9 (i.e. commented out for more than 17 years). 'Maybe later...' will never happen. Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Richard Weinberger <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2019-08-22RDMA/siw: Fix SGL mapping issuesBernard Metzler1-22/+15
All user level and most in-kernel applications submit WQEs where the SG list entries are all of a single type. iSER in particular, however, will send us WQEs with mixed SG types: sge[0] = kernel buffer, sge[1] = PBL region. Check and set is_kva on each SG entry individually instead of assuming the first SGE type carries through to the last. This fixes iSER over siw. Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Reported-by: Krishnamraju Eraparaju <[email protected]> Tested-by: Krishnamraju Eraparaju <[email protected]> Signed-off-by: Bernard Metzler <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Doug Ledford <[email protected]>
2019-08-22RDMA/bnxt_re: Fix stack-out-of-bounds in bnxt_qplib_rcfw_send_messageSelvin Xavier2-4/+15
Driver copies FW commands to the HW queue as units of 16 bytes. Some of the command structures are not exact multiple of 16. So while copying the data from those structures, the stack out of bounds messages are reported by KASAN. The following error is reported. [ 1337.530155] ================================================================== [ 1337.530277] BUG: KASAN: stack-out-of-bounds in bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530413] Read of size 16 at addr ffff888725477a48 by task rmmod/2785 [ 1337.530540] CPU: 5 PID: 2785 Comm: rmmod Tainted: G OE 5.2.0-rc6+ #75 [ 1337.530541] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 1337.530542] Call Trace: [ 1337.530548] dump_stack+0x5b/0x90 [ 1337.530556] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530560] print_address_description+0x65/0x22e [ 1337.530568] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530575] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530577] __kasan_report.cold.3+0x37/0x77 [ 1337.530581] ? _raw_write_trylock+0x10/0xe0 [ 1337.530588] ? bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530590] kasan_report+0xe/0x20 [ 1337.530592] memcpy+0x1f/0x50 [ 1337.530600] bnxt_qplib_rcfw_send_message+0x40a/0x850 [bnxt_re] [ 1337.530608] ? bnxt_qplib_creq_irq+0xa0/0xa0 [bnxt_re] [ 1337.530611] ? xas_create+0x3aa/0x5f0 [ 1337.530613] ? xas_start+0x77/0x110 [ 1337.530615] ? xas_clear_mark+0x34/0xd0 [ 1337.530623] bnxt_qplib_free_mrw+0x104/0x1a0 [bnxt_re] [ 1337.530631] ? bnxt_qplib_destroy_ah+0x110/0x110 [bnxt_re] [ 1337.530633] ? bit_wait_io_timeout+0xc0/0xc0 [ 1337.530641] bnxt_re_dealloc_mw+0x2c/0x60 [bnxt_re] [ 1337.530648] bnxt_re_destroy_fence_mr+0x77/0x1d0 [bnxt_re] [ 1337.530655] bnxt_re_dealloc_pd+0x25/0x60 [bnxt_re] [ 1337.530677] ib_dealloc_pd_user+0xbe/0xe0 [ib_core] [ 1337.530683] srpt_remove_one+0x5de/0x690 [ib_srpt] [ 1337.530689] ? __srpt_close_all_ch+0xc0/0xc0 [ib_srpt] [ 1337.530692] ? xa_load+0x87/0xe0 ... [ 1337.530840] do_syscall_64+0x6d/0x1f0 [ 1337.530843] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1337.530845] RIP: 0033:0x7ff5b389035b [ 1337.530848] Code: 73 01 c3 48 8b 0d 2d 0b 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 0a 2c 00 f7 d8 64 89 01 48 [ 1337.530849] RSP: 002b:00007fff83425c28 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 1337.530852] RAX: ffffffffffffffda RBX: 00005596443e6750 RCX: 00007ff5b389035b [ 1337.530853] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005596443e67b8 [ 1337.530854] RBP: 0000000000000000 R08: 00007fff83424ba1 R09: 0000000000000000 [ 1337.530856] R10: 00007ff5b3902960 R11: 0000000000000206 R12: 00007fff83425e50 [ 1337.530857] R13: 00007fff8342673c R14: 00005596443e6260 R15: 00005596443e6750 [ 1337.530885] The buggy address belongs to the page: [ 1337.530962] page:ffffea001c951dc0 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 1337.530964] flags: 0x57ffffc0000000() [ 1337.530967] raw: 0057ffffc0000000 0000000000000000 ffffffff1c950101 0000000000000000 [ 1337.530970] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 1337.530970] page dumped because: kasan: bad access detected [ 1337.530996] Memory state around the buggy address: [ 1337.531072] ffff888725477900: 00 00 00 00 f1 f1 f1 f1 00 00 00 00 00 f2 f2 f2 [ 1337.531180] ffff888725477980: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 [ 1337.531288] >ffff888725477a00: 00 f2 f2 f2 f2 f2 f2 00 00 00 f2 00 00 00 00 00 [ 1337.531393] ^ [ 1337.531478] ffff888725477a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1337.531585] ffff888725477b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1337.531691] ================================================================== Fix this by passing the exact size of each FW command to bnxt_qplib_rcfw_send_message as req->cmd_size. Before sending the command to HW, modify the req->cmd_size to number of 16 byte units. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Selvin Xavier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Doug Ledford <[email protected]>
2019-08-22afs: use correct afs_call_type in yfs_fs_store_opaque_acl2YueHaibing1-1/+1
It seems that 'yfs_RXYFSStoreOpaqueACL2' should be use in yfs_fs_store_opaque_acl2(). Fixes: f5e4546347bc ("afs: Implement YFS ACL setting") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David Howells <[email protected]>
2019-08-22afs: Fix possible oops in afs_lookup trace eventMarc Dionne1-1/+2
The afs_lookup trace event can cause the following: [ 216.576777] BUG: kernel NULL pointer dereference, address: 000000000000023b [ 216.576803] #PF: supervisor read access in kernel mode [ 216.576813] #PF: error_code(0x0000) - not-present page ... [ 216.576913] RIP: 0010:trace_event_raw_event_afs_lookup+0x9e/0x1c0 [kafs] If the inode from afs_do_lookup() is an error other than ENOENT, or if it is ENOENT and afs_try_auto_mntpt() returns an error, the trace event will try to dereference the error pointer as a valid pointer. Use IS_ERR_OR_NULL to only pass a valid pointer for the trace, or NULL. Ideally the trace would include the error value, but for now just avoid the oops. Fixes: 80548b03991f ("afs: Add more tracepoints") Signed-off-by: Marc Dionne <[email protected]> Signed-off-by: David Howells <[email protected]>
2019-08-22afs: Fix leak in afs_lookup_cell_rcu()David Howells1-0/+4
Fix a leak on the cell refcount in afs_lookup_cell_rcu() due to non-clearance of the default error in the case a NULL cell name is passed and the workstation default cell is used. Also put a bit at the end to make sure we don't leak a cell ref if we're going to be returning an error. This leak results in an assertion like the following when the kafs module is unloaded: AFS: Assertion failed 2 == 1 is false 0x2 == 0x1 is false ------------[ cut here ]------------ kernel BUG at fs/afs/cell.c:770! ... RIP: 0010:afs_manage_cells+0x220/0x42f [kafs] ... process_one_work+0x4c2/0x82c ? pool_mayday_timeout+0x1e1/0x1e1 ? do_raw_spin_lock+0x134/0x175 worker_thread+0x336/0x4a6 ? rescuer_thread+0x4af/0x4af kthread+0x1de/0x1ee ? kthread_park+0xd4/0xd4 ret_from_fork+0x24/0x30 Fixes: 989782dcdc91 ("afs: Overhaul cell database management") Signed-off-by: David Howells <[email protected]>
2019-08-22KVM: arm/arm64: Only skip MMIO insn onceAndrew Jones1-0/+7
If after an MMIO exit to userspace a VCPU is immediately run with an immediate_exit request, such as when a signal is delivered or an MMIO emulation completion is needed, then the VCPU completes the MMIO emulation and immediately returns to userspace. As the exit_reason does not get changed from KVM_EXIT_MMIO in these cases we have to be careful not to complete the MMIO emulation again, when the VCPU is eventually run again, because the emulation does an instruction skip (and doing too many skips would be a waste of guest code :-) We need to use additional VCPU state to track if the emulation is complete. As luck would have it, we already have 'mmio_needed', which even appears to be used in this way by other architectures already. Fixes: 0d640732dbeb ("arm64: KVM: Skip MMIO insn after emulation") Acked-by: Mark Rutland <[email protected]> Signed-off-by: Andrew Jones <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-08-22mmc: sdhci-of-at91: add quirk for broken HS200Eugen Hristev1-0/+3
HS200 is not implemented in the driver, but the controller claims it through caps. Remove it via a quirk, to make sure the mmc core do not try to enable HS200, as it causes the eMMC initialization to fail. Signed-off-by: Eugen Hristev <[email protected]> Acked-by: Ludovic Desroches <[email protected]> Acked-by: Adrian Hunter <[email protected]> Fixes: bb5f8ea4d514 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC") Cc: [email protected] # v4.4+ Signed-off-by: Ulf Hansson <[email protected]>
2019-08-22libceph: fix PG split vs OSD (re)connect raceIlya Dryomov1-5/+4
We can't rely on ->peer_features in calc_target() because it may be called both when the OSD session is established and open and when it's not. ->peer_features is not valid unless the OSD session is open. If this happens on a PG split (pg_num increase), that could mean we don't resend a request that should have been resent, hanging the client indefinitely. In userspace this was fixed by looking at require_osd_release and get_xinfo[osd].features fields of the osdmap. However these fields belong to the OSD section of the osdmap, which the kernel doesn't decode (only the client section is decoded). Instead, let's drop this feature check. It effectively checks for luminous, so only pre-luminous OSDs would be affected in that on a PG split the kernel might resend a request that should not have been resent. Duplicates can occur in other scenarios, so both sides should already be prepared for them: see dup/replay logic on the OSD side and retry_attempt check on the client side. Cc: [email protected] Fixes: 7de030d6b10a ("libceph: resend on PG splits if OSD has RESEND_ON_SPLIT") Link: https://tracker.ceph.com/issues/41162 Reported-by: Jerry Lee <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]> Tested-by: Jerry Lee <[email protected]> Reviewed-by: Jeff Layton <[email protected]>
2019-08-22ceph: don't try fill file_lock on unsuccessful GETFILELOCK replyJeff Layton1-2/+1
When ceph_mdsc_do_request returns an error, we can't assume that the filelock_reply pointer will be set. Only try to fetch fields out of the r_reply_info when it returns success. Cc: [email protected] Reported-by: Hector Martin <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2019-08-22ceph: clear page dirty before invalidate pageErqi Chen1-2/+3
clear_page_dirty_for_io(page) before mapping->a_ops->invalidatepage(). invalidatepage() clears page's private flag, if dirty flag is not cleared, the page may cause BUG_ON failure in ceph_set_page_dirty(). Cc: [email protected] Link: https://tracker.ceph.com/issues/40862 Signed-off-by: Erqi Chen <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.