aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-01-13bpf: iter_udp: Retry with a larger batch size without going back to the ↵Martin KaFai Lau1-1/+0
previous bucket The current logic is to use a default size 16 to batch the whole bucket. If it is too small, it will retry with a larger batch size. The current code accidentally does a state->bucket-- before retrying. This goes back to retry with the previous bucket which has already been done. This patch fixed it. It is hard to create a selftest. I added a WARN_ON(state->bucket < 0), forced a particular port to be hashed to the first bucket, created >16 sockets, and observed the for-loop went back to the "-1" bucket. Cc: Aditi Ghag <[email protected]> Fixes: c96dac8d369f ("bpf: udp: Implement batching for sockets iterator") Acked-by: Yonghong Song <[email protected]> Signed-off-by: Martin KaFai Lau <[email protected]> Reviewed-by: Aditi Ghag <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-01-13net: netdev_queue: netdev_txq_completed_mb(): fix wake conditionMarc Kleine-Budde1-1/+1
netif_txq_try_stop() uses "get_desc >= start_thrs" as the check for the call to netif_tx_start_queue(). Use ">=" i netdev_txq_completed_mb(), too. Fixes: c91c46de6bbc ("net: provide macros for commonly copied lockless queue stop/wake code") Signed-off-by: Marc Kleine-Budde <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-01-13net: add more sanity check in virtio_net_hdr_to_skb()Eric Dumazet1-2/+7
syzbot/KMSAN reports access to uninitialized data from gso_features_check() [1] The repro use af_packet, injecting a gso packet and hdrlen == 0. We could fix the issue making gso_features_check() more careful while dealing with NETIF_F_TSO_MANGLEID in fast path. Or we can make sure virtio_net_hdr_to_skb() pulls minimal network and transport headers as intended. Note that for GSO packets coming from untrusted sources, SKB_GSO_DODGY bit forces a proper header validation (and pull) before the packet can hit any device ndo_start_xmit(), thus we do not need a precise disection at virtio_net_hdr_to_skb() stage. [1] BUG: KMSAN: uninit-value in skb_gso_segment include/net/gso.h:83 [inline] BUG: KMSAN: uninit-value in validate_xmit_skb+0x10f2/0x1930 net/core/dev.c:3629 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x10f2/0x1930 net/core/dev.c:3629 __dev_queue_xmit+0x1eac/0x5130 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780 packet_alloc_skb net/packet/af_packet.c:2936 [inline] packet_snd net/packet/af_packet.c:3030 [inline] packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5025 Comm: syz-executor279 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Reported-by: [email protected] Link: https://lore.kernel.org/netdev/[email protected]/ Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets") Signed-off-by: Eric Dumazet <[email protected]> Cc: Willem de Bruijn <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-01-13net: sched: track device in tcf_block_get/put_ext() only for clsact binder typesJiri Pirko1-2/+10
Clsact/ingress qdisc is not the only one using shared block, red is also using it. The device tracking was originally introduced by commit 913b47d3424e ("net/sched: Introduce tc block netdev tracking infra") for clsact/ingress only. Commit 94e2557d086a ("net: sched: move block device tracking into tcf_block_get/put_ext()") mistakenly enabled that for red as well. Fix that by adding a check for the binder type being clsact when adding device to the block->ports xarray. Reported-by: Ido Schimmel <[email protected]> Closes: https://lore.kernel.org/all/ZZ6JE0odnu1lLPtu@shredder/ Fixes: 94e2557d086a ("net: sched: move block device tracking into tcf_block_get/put_ext()") Signed-off-by: Jiri Pirko <[email protected]> Tested-by: Ido Schimmel <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Tested-by: Victor Nogueira <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-01-13udp: annotate data-races around up->pendingEric Dumazet2-14/+14
up->pending can be read without holding the socket lock, as pointed out by syzbot [1] Add READ_ONCE() in lockless contexts, and WRITE_ONCE() on write side. [1] BUG: KCSAN: data-race in udpv6_sendmsg / udpv6_sendmsg write to 0xffff88814e5eadf0 of 4 bytes by task 15547 on cpu 1: udpv6_sendmsg+0x1405/0x1530 net/ipv6/udp.c:1596 inet6_sendmsg+0x63/0x80 net/ipv6/af_inet6.c:657 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x257/0x310 net/socket.c:2192 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x78/0x90 net/socket.c:2200 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b read to 0xffff88814e5eadf0 of 4 bytes by task 15551 on cpu 0: udpv6_sendmsg+0x22c/0x1530 net/ipv6/udp.c:1373 inet6_sendmsg+0x63/0x80 net/ipv6/af_inet6.c:657 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2586 ___sys_sendmsg net/socket.c:2640 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2726 __do_sys_sendmmsg net/socket.c:2755 [inline] __se_sys_sendmmsg net/socket.c:2752 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2752 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b value changed: 0x00000000 -> 0x0000000a Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 15551 Comm: syz-executor.1 Tainted: G W 6.7.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: [email protected] Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-01-13net: stmmac: Fix ethool link settings ops for integrated PCSSneh Shah1-4/+6
Currently get/set_link_ksettings ethtool ops are dependent on PCS. When PCS is integrated, it will not have separate link config. Bypass configuring and checking PCS for integrated PCS. Fixes: aa571b6275fb ("net: stmmac: add new switch to struct plat_stmmacenet_data") Tested-by: Andrew Halaney <[email protected]> # sa8775p-ride Signed-off-by: Sneh Shah <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-01-12Merge branch 'mptcp-better-validation-of-mptcpopt_mp_join-option'Jakub Kicinski2-11/+11
Eric Dumazet says: ==================== mptcp: better validation of MPTCPOPT_MP_JOIN option Based on a syzbot report (see 4th patch in the series). We need to be more explicit about which one of the following flag is set by mptcp_parse_option(): - OPTION_MPTCP_MPJ_SYN - OPTION_MPTCP_MPJ_SYNACK - OPTION_MPTCP_MPJ_ACK Then select the appropriate values instead of OPTIONS_MPTCP_MPJ Paolo suggested to do the same for OPTIONS_MPTCP_MPC (5th patch) ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-12mptcp: refine opt_mp_capable determinationEric Dumazet1-4/+4
OPTIONS_MPTCP_MPC is a combination of three flags. It would be better to be strict about testing what flag is expected, at least for code readability. mptcp_parse_option() already makes the distinction. - subflow_check_req() should use OPTION_MPTCP_MPC_SYN. - mptcp_subflow_init_cookie_req() should use OPTION_MPTCP_MPC_ACK. - subflow_finish_connect() should use OPTION_MPTCP_MPC_SYNACK - subflow_syn_recv_sock should use OPTION_MPTCP_MPC_ACK Suggested-by: Paolo Abeni <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Fixes: 74c7dfbee3e1 ("mptcp: consolidate in_opt sub-options fields in a bitmask") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-12mptcp: use OPTION_MPTCP_MPJ_SYN in subflow_check_req()Eric Dumazet1-2/+2
syzbot reported that subflow_check_req() was using uninitialized data in subflow_check_req() [1] This is because mp_opt.token is only set when OPTION_MPTCP_MPJ_SYN is also set. While we are are it, fix mptcp_subflow_init_cookie_req() to test for OPTION_MPTCP_MPJ_ACK. [1] BUG: KMSAN: uninit-value in subflow_token_join_request net/mptcp/subflow.c:91 [inline] BUG: KMSAN: uninit-value in subflow_check_req+0x1028/0x15d0 net/mptcp/subflow.c:209 subflow_token_join_request net/mptcp/subflow.c:91 [inline] subflow_check_req+0x1028/0x15d0 net/mptcp/subflow.c:209 subflow_v6_route_req+0x269/0x410 net/mptcp/subflow.c:367 tcp_conn_request+0x153a/0x4240 net/ipv4/tcp_input.c:7164 subflow_v6_conn_request+0x3ee/0x510 tcp_rcv_state_process+0x2e1/0x4ac0 net/ipv4/tcp_input.c:6659 tcp_v6_do_rcv+0x11bf/0x1fe0 net/ipv6/tcp_ipv6.c:1669 tcp_v6_rcv+0x480b/0x4fb0 net/ipv6/tcp_ipv6.c:1900 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5532 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646 netif_receive_skb_internal net/core/dev.c:5732 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5791 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x1490 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Local variable mp_opt created at: subflow_check_req+0x6d/0x15d0 net/mptcp/subflow.c:145 subflow_v6_route_req+0x269/0x410 net/mptcp/subflow.c:367 CPU: 1 PID: 5924 Comm: syz-executor.3 Not tainted 6.7.0-rc8-syzkaller-00055-g5eff55d725a4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Florian Westphal <[email protected]> Cc: Peter Krystad <[email protected]> Cc: Matthieu Baerts <[email protected]> Cc: Mat Martineau <[email protected]> Cc: Geliang Tang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-12mptcp: use OPTION_MPTCP_MPJ_SYNACK in subflow_finish_connect()Eric Dumazet1-1/+1
subflow_finish_connect() uses four fields (backup, join_id, thmac, none) that may contain garbage unless OPTION_MPTCP_MPJ_SYNACK has been set in mptcp_parse_option() Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Eric Dumazet <[email protected]> Cc: Florian Westphal <[email protected]> Cc: Peter Krystad <[email protected]> Cc: Matthieu Baerts <[email protected]> Cc: Mat Martineau <[email protected]> Cc: Geliang Tang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-12mptcp: strict validation before using mp_opt->hmacEric Dumazet1-1/+1
mp_opt->hmac contains uninitialized data unless OPTION_MPTCP_MPJ_ACK was set in mptcp_parse_option(). We must refine the condition before we call subflow_hmac_valid(). Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Eric Dumazet <[email protected]> Cc: Florian Westphal <[email protected]> Cc: Peter Krystad <[email protected]> Cc: Matthieu Baerts <[email protected]> Cc: Mat Martineau <[email protected]> Cc: Geliang Tang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-12mptcp: mptcp_parse_option() fix for MPTCPOPT_MP_JOINEric Dumazet1-3/+3
mptcp_parse_option() currently sets OPTIONS_MPTCP_MPJ, for the three possible cases handled for MPTCPOPT_MP_JOIN option. OPTIONS_MPTCP_MPJ is the combination of three flags: - OPTION_MPTCP_MPJ_SYN - OPTION_MPTCP_MPJ_SYNACK - OPTION_MPTCP_MPJ_ACK This is a problem, because backup, join_id, token, nonce and/or hmac fields could be left uninitialized in some cases. Distinguish the three cases, as following patches will need this step. Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Eric Dumazet <[email protected]> Cc: Florian Westphal <[email protected]> Cc: Peter Krystad <[email protected]> Cc: Matthieu Baerts <[email protected]> Cc: Mat Martineau <[email protected]> Cc: Geliang Tang <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-12net: liquidio: fix clang-specific W=1 build warningsDmitry Antipov3-3/+6
When compiling with clang-18 and W=1, I've noticed the following warnings: drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1493:16: warning: cast from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to 'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to incompatible function type [-Wcast-function-type-strict] 1493 | mbox_cmd.fn = (octeon_mbox_callback_t)cn23xx_get_vf_stats_callback; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and: drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:432:16: warning: cast from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to 'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to incompatible function type [-Wcast-function-type-strict] 432 | mbox_cmd.fn = (octeon_mbox_callback_t)octeon_pfvf_hs_callback; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix both of the above by adjusting 'octeon_mbox_callback_t' to match actual callback definitions (at the cost of adding an extra forward declaration). Signed-off-by: Dmitry Antipov <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-12net: fill in MODULE_DESCRIPTION()s for wx_libJakub Kicinski1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add a description to Wangxun's common code lib. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-01-12net: phy: micrel: populate .soft_reset for KSZ9131Claudiu Beznea1-0/+1
The RZ/G3S SMARC Module has 2 KSZ9131 PHYs. In this setup, the KSZ9131 PHY is used with the ravb Ethernet driver. It has been discovered that when bringing the Ethernet interface down/up continuously, e.g., with the following sh script: $ while :; do ifconfig eth0 down; ifconfig eth0 up; done the link speed and duplex are wrong after interrupting the bring down/up operation even though the Ethernet interface is up. To recover from this state the following configuration sequence is necessary (executed manually): $ ifconfig eth0 down $ ifconfig eth0 up The behavior has been identified also on the Microchip SAMA7G5-EK board which runs the macb driver and uses the same PHY. The order of PHY-related operations in ravb_open() is as follows: ravb_open() -> ravb_phy_start() -> ravb_phy_init() -> of_phy_connect() -> phy_connect_direct() -> phy_attach_direct() -> phy_init_hw() -> phydev->drv->soft_reset() phydev->drv->config_init() phydev->drv->config_intr() phy_resume() kszphy_resume() The order of PHY-related operations in ravb_close is as follows: ravb_close() -> phy_stop() -> phy_suspend() -> kszphy_suspend() -> genphy_suspend() // set BMCR_PDOWN bit in MII_BMCR In genphy_suspend() setting the BMCR_PDWN bit in MII_BMCR switches the PHY to Software Power-Down (SPD) mode (according to the KSZ9131 datasheet). Thus, when opening the interface after it has been previously closed (via ravb_close()), the phydev->drv->config_init() and phydev->drv->config_intr() reach the KSZ9131 PHY driver via the ksz9131_config_init() and kszphy_config_intr() functions. KSZ9131 specifies that the MII management interface remains operational during SPD (Software Power-Down), but (according to manual): - Only access to the standard registers (0 through 31) is supported. - Access to MMD address spaces other than MMD address space 1 is possible if the spd_clock_gate_override bit is set. - Access to MMD address space 1 is not possible. The spd_clock_gate_override bit is not used in the KSZ9131 driver. ksz9131_config_init() configures RGMII delay, pad skews and LEDs by accessesing MMD registers other than those in address space 1. The datasheet for the KSZ9131 does not specify what happens if registers from an unsupported address space are accessed while the PHY is in SPD. To fix the issue the .soft_reset method has been instantiated for KSZ9131, too. This resets the PHY to the default state before doing any configurations to it, thus switching it out of SPD. Fixes: bff5b4b37372 ("net: phy: micrel: add Microchip KSZ9131 initial driver") Signed-off-by: Claudiu Beznea <[email protected]> Reviewed-by: Maxime Chevallier <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-01-12net: micrel: Fix PTP frame parsing for lan8841Horatiu Vultur1-0/+8
The HW has the capability to check each frame if it is a PTP frame, which domain it is, which ptp frame type it is, different ip address in the frame. And if one of these checks fail then the frame is not timestamp. Most of these checks were disabled except checking the field minorVersionPTP inside the PTP header. Meaning that once a partner sends a frame compliant to 8021AS which has minorVersionPTP set to 1, then the frame was not timestamp because the HW expected by default a value of 0 in minorVersionPTP. Fix this issue by removing this check so the userspace can decide on this. Fixes: cafc3662ee3f ("net: micrel: Add PHC support for lan8841") Signed-off-by: Horatiu Vultur <[email protected]> Reviewed-by: Divya Koppera <[email protected]> Reviewed-by: Rahul Rameshbabu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-01-11amt: do not use overwrapped cb areaTaehee Yoo1-3/+3
amt driver uses skb->cb for storing tunnel information. This job is worked before TC layer and then amt driver load tunnel info from skb->cb after TC layer. So, its cb area should not be overwrapped with CB area used by TC. In order to not use cb area used by TC, it skips the biggest cb structure used by TC, which was qdisc_skb_cb. But it's not anymore. Currently, biggest structure of TC's CB is tc_skb_cb. So, it should skip size of tc_skb_cb instead of qdisc_skb_cb. Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block") Signed-off-by: Taehee Yoo <[email protected]> Acked-by: Paolo Abeni <[email protected]> Reviewed-by: Jamal Hadi Salim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11Merge branch 'net-ethernet-ti-am65-cpsw-allow-for-mtu-values'Jakub Kicinski1-2/+3
Sanjuán García, Jorge says: ==================== net: ethernet: ti: am65-cpsw: Allow for MTU values The am65-cpsw-nuss driver has a fixed definition for the maximum ethernet frame length of 1522 bytes (AM65_CPSW_MAX_PACKET_SIZE). This limits the switch ports to only operate at a maximum MTU of 1500 bytes. When combining this CPSW switch with a DSA switch connected to one of its ports this limitation shows up. The extra 8 bytes the DSA subsystem adds internally to the ethernet frame create resulting frames bigger than 1522 bytes (1518 for non VLAN + 8 for DSA stuff) so they get dropped by the switch. One of the issues with the the am65-cpsw-nuss driver is that the network device max_mtu was being set to the same fixed value defined for the max total frame length (1522 bytes). This makes the DSA subsystem believe that the MTU of the interface can be set to 1508 bytes to make room for the extra 8 bytes of the DSA headers. However, all packages created assuming the 1500 bytes payload get dropped by the switch as oversized. This series offers a solution to this problem. The max_mtu advertised on the network device and the actual max frame size configured on the switch registers are made consistent by letting the extra room needed for the ethernet headers and the frame checksum (22 bytes including VLAN). ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11net: ethernet: ti: am65-cpsw: Fix max mtu to fit ethernet framesSanjuán García, Jorge1-2/+3
The value of AM65_CPSW_MAX_PACKET_SIZE represents the maximum length of a received frame. This value is written to the register AM65_CPSW_PORT_REG_RX_MAXLEN. The maximum MTU configured on the network device should then leave some room for the ethernet headers and frame check. Otherwise, if the network interface is configured to its maximum mtu possible, the frames will be larger than AM65_CPSW_MAX_PACKET_SIZE and will get dropped as oversized. The switch supports ethernet frame sizes between 64 and 2024 bytes (including VLAN) as stated in the technical reference manual, so define AM65_CPSW_MAX_PACKET_SIZE with that maximum size. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Jorge Sanjuan Garcia <[email protected]> Reviewed-by: Horatiu Vultur <[email protected]> Reviewed-by: Siddharth Vadapalli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a ↵Zhu Yanjun1-4/+5
region of size 10" warnings Fix the warnings when building virtio_net driver. " drivers/net/virtio_net.c: In function ‘init_vqs’: drivers/net/virtio_net.c:4551:48: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=] 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~ In function ‘virtnet_find_vqs’, inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8: drivers/net/virtio_net.c:4551:41: note: directive argument in the range [-2147483643, 65534] 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~~~~~~~~~ drivers/net/virtio_net.c:4551:17: note: ‘sprintf’ output between 8 and 18 bytes into a destination of size 16 4551 | sprintf(vi->rq[i].name, "input.%d", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/virtio_net.c: In function ‘init_vqs’: drivers/net/virtio_net.c:4552:49: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 9 [-Wformat-overflow=] 4552 | sprintf(vi->sq[i].name, "output.%d", i); | ^~ In function ‘virtnet_find_vqs’, inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8: drivers/net/virtio_net.c:4552:41: note: directive argument in the range [-2147483643, 65534] 4552 | sprintf(vi->sq[i].name, "output.%d", i); | ^~~~~~~~~~~ drivers/net/virtio_net.c:4552:17: note: ‘sprintf’ output between 9 and 19 bytes into a destination of size 16 4552 | sprintf(vi->sq[i].name, "output.%d", i); " Reviewed-by: Xuan Zhuo <[email protected]> Signed-off-by: Zhu Yanjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11octeontx2-af: CN10KB: Fix FIFO length calculation for RPM2Nithin Dabilpuram1-1/+6
RPM0 and RPM1 on the CN10KB SoC have 8 LMACs each, whereas RPM2 has only 4 LMACs. Similarly, the RPM0 and RPM1 have 256KB FIFO, whereas RPM2 has 128KB FIFO. This patch fixes an issue with improper TX credit programming for the RPM2 link. Fixes: b9d0fedc6234 ("octeontx2-af: cn10kb: Add RPM_USX MAC support") Signed-off-by: Nithin Dabilpuram <[email protected]> Signed-off-by: Naveen Mamindlapalli <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11Merge branch 'rtnetlink-allow-to-enslave-with-one-msg-an-up-interface'Jakub Kicinski2-7/+35
Nicolas Dichtel says: ==================== rtnetlink: allow to enslave with one msg an up interface The first patch fixes a regression, introduced in linux v6.1, by reverting a patch. The second patch adds a test to verify this API. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11selftests: rtnetlink: check enslaving iface in a bondNicolas Dichtel1-0/+28
The goal is to check the following two sequences: > ip link set dummy0 up > ip link set dummy0 master bond0 down Signed-off-by: Nicolas Dichtel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11Revert "net: rtnetlink: Enslave device before bringing it up"Nicolas Dichtel1-7/+7
This reverts commit a4abfa627c3865c37e036bccb681619a50d3d93c. The patch broke: > ip link set dummy0 up > ip link set dummy0 master bond0 down This last command is useful to be able to enslave an interface with only one netlink message. After discussion, there is no good reason to support: > ip link set dummy0 down > ip link set dummy0 master bond0 up because the bond interface already set the slave up when it is up. Cc: [email protected] Fixes: a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up") Signed-off-by: Nicolas Dichtel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Reviewed-by: Hangbin Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11rxrpc: Fix use of Don't Fragment flagDavid Howells4-5/+17
rxrpc normally has the Don't Fragment flag set on the UDP packets it transmits, except when it has decided that DATA packets aren't getting through - in which case it turns it off just for the DATA transmissions. This can be a problem, however, for RESPONSE packets that convey authentication and crypto data from the client to the server as ticket may be larger than can fit in the MTU. In such a case, rxrpc gets itself into an infinite loop as the sendmsg returns an error (EMSGSIZE), which causes rxkad_send_response() to return -EAGAIN - and the CHALLENGE packet is put back on the Rx queue to retry, leading to the I/O thread endlessly attempting to perform the transmission. Fix this by disabling DF on RESPONSE packets for now. The use of DF and best data MTU determination needs reconsidering at some point in the future. Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Reported-by: Marc Dionne <[email protected]> Signed-off-by: David Howells <[email protected]> cc: [email protected] Acked-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11net: dsa: fix netdev_priv() dereference before check on non-DSA netdevice eventsVladimir Oltean1-2/+5
After the blamed commit, we started doing this dereference for every NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system. static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev) { struct dsa_user_priv *p = netdev_priv(dev); return p->dp; } Which is obviously bogus, because not all net_devices have a netdev_priv() of type struct dsa_user_priv. But struct dsa_user_priv is fairly small, and p->dp means dereferencing 8 bytes starting with offset 16. Most drivers allocate that much private memory anyway, making our access not fault, and we discard the bogus data quickly afterwards, so this wasn't caught. But the dummy interface is somewhat special in that it calls alloc_netdev() with a priv size of 0. So every netdev_priv() dereference is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event with a VLAN as its new upper: $ ip link add dummy1 type dummy $ ip link add link dummy1 name dummy1.100 type vlan id 100 [ 43.309174] ================================================================== [ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8 [ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374 [ 43.330058] [ 43.342436] Call trace: [ 43.366542] dsa_user_prechangeupper+0x30/0xe8 [ 43.371024] dsa_user_netdevice_event+0xb38/0xee8 [ 43.375768] notifier_call_chain+0xa4/0x210 [ 43.379985] raw_notifier_call_chain+0x24/0x38 [ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8 [ 43.389120] netdev_upper_dev_link+0x70/0xa8 [ 43.393424] register_vlan_dev+0x1bc/0x310 [ 43.397554] vlan_newlink+0x210/0x248 [ 43.401247] rtnl_newlink+0x9fc/0xe30 [ 43.404942] rtnetlink_rcv_msg+0x378/0x580 Avoid the kernel oops by dereferencing after the type check, as customary. Fixes: 4c3f80d22b2e ("net: dsa: walk through all changeupper notifier functions") Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11net: qualcomm: rmnet: fix global oob in rmnet_policyLin Ma1-1/+1
The variable rmnet_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207 CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline] __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdcf2072359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: rmnet_policy+0x30/0xe0 The buggy address belongs to the physical page: page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243 flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9 >ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 ^ ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 According to the comment of `nla_parse_nested_deprecated`, the maxtype should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here. Fixes: 14452ca3b5ce ("net: qualcomm: rmnet: Export mux_id and flags to netlink") Signed-off-by: Lin Ma <[email protected]> Reviewed-by: Subash Abhinov Kasiviswanathan <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11selftests/net/tcp-ao: Use LDLIBS instead of LDFLAGSDmitry Safonov1-2/+2
The rules to link selftests are: > $(OUTPUT)/%_ipv4: %.c > $(LINK.c) $^ $(LDLIBS) -o $@ > > $(OUTPUT)/%_ipv6: %.c > $(LINK.c) -DIPV6_TEST $^ $(LDLIBS) -o $@ The intel test robot uses only selftest's Makefile, not the top linux Makefile: > make W=1 O=/tmp/kselftest -C tools/testing/selftests So, $(LINK.c) is determined by environment, rather than by kernel Makefiles. On my machine (as well as other people that ran tcp-ao selftests) GNU/Make implicit definition does use $(LDFLAGS): > [dima@Mindolluin ~]$ make -p -f/dev/null | grep '^LINK.c\>' > make: *** No targets. Stop. > LINK.c = $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH) But, according to build robot report, it's not the case for them. While I could just avoid using pre-defined $(LINK.c), it's also used by selftests/lib.mk by default. Anyways, according to GNU/Make documentation [1], I should have used $(LDLIBS) instead of $(LDFLAGS) in the first place, so let's just do it: > LDFLAGS > Extra flags to give to compilers when they are supposed to invoke > the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added > to the LDLIBS variable instead. > LDLIBS > Library flags or names given to compilers when they are supposed > to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still > supported) alternative to LDLIBS. Non-library linker flags, such > as -L, should go in the LDFLAGS variable. [1]: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Dmitry Safonov <[email protected]> Acked-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11wangxunx: select CONFIG_PHYLINK where neededArnd Bergmann1-1/+1
The ngbe driver needs phylink: arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_nway_reset': wx_ethtool.c:(.text+0x458): undefined reference to `phylink_ethtool_nway_reset' arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_main.o: in function `ngbe_remove': ngbe_main.c:(.text+0x7c): undefined reference to `phylink_destroy' arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_main.o: in function `ngbe_open': ngbe_main.c:(.text+0xf90): undefined reference to `phylink_connect_phy' arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.o: in function `ngbe_mdio_init': ngbe_mdio.c:(.text+0x314): undefined reference to `phylink_create' Add the missing Kconfig description for this. Fixes: bc2426d74aa3 ("net: ngbe: convert phylib to phylink") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11MAINTAINERS: ibmvnic: drop Dany from reviewersJakub Kicinski1-1/+0
I missed that Dany uses a different email address when tagging patches ([email protected]) and asked him if he's still actively working on ibmvnic. He doesn't really fall under our removal criteria, but he admitted that he already moved on to other projects. Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11MAINTAINERS: mark ax25 as OrphanJakub Kicinski2-2/+2
We haven't heard from Ralf for two years, according to lore. We get a constant stream of "fixes" to ax25 from people using code analysis tools. Nobody is reviewing those, let's reflect this reality in MAINTAINERS. Subsystem AX.25 NETWORK LAYER Changes 9 / 59 (15%) (No activity) Top reviewers: [2]: [email protected] [2]: [email protected] [2]: [email protected] INACTIVE MAINTAINER Ralf Baechle <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11MAINTAINERS: Bluetooth: retire Johan (for now?)Jakub Kicinski2-1/+4
Johan moved to maintaining the Zephyr Bluetooth stack, and we haven't heard from him on the ML in 3 years (according to lore), and seen any tags in git in 4 years. Trade the MAINTAINER entry for CREDITS, we can revert whenever Johan comes back to Linux hacking :) Subsystem BLUETOOTH SUBSYSTEM Changes 173 / 986 (17%) Last activity: 2023-12-22 Marcel Holtmann <[email protected]>: Author 91cb4c19118a 2022-01-27 00:00:00 52 Committer edcb185fa9c4 2022-05-23 00:00:00 446 Tags 000c2fa2c144 2023-04-23 00:00:00 523 Johan Hedberg <[email protected]>: Luiz Augusto von Dentz <[email protected]>: Author d03376c18592 2023-12-22 00:00:00 241 Committer da9065caa594 2023-12-22 00:00:00 341 Tags da9065caa594 2023-12-22 00:00:00 493 Top reviewers: [33]: [email protected] [31]: [email protected] [27]: [email protected] INACTIVE MAINTAINER Johan Hedberg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11MAINTAINERS: eth: mark Cavium liquidio as an OrphanJakub Kicinski1-4/+1
We haven't seen much review activity from the liquidio maintainers for years. Reflect that reality in MAINTAINERS. Our scripts report: Subsystem CAVIUM LIQUIDIO NETWORK DRIVER Changes 30 / 87 (34%) Last activity: 2019-01-28 Derek Chickles <[email protected]>: Tags ac93e2fa8550 2019-01-28 00:00:00 1 Satanand Burla <[email protected]>: Felix Manlunas <[email protected]>: Tags ac93e2fa8550 2019-01-28 00:00:00 1 Top reviewers: [5]: [email protected] [4]: [email protected] [4]: [email protected] INACTIVE MAINTAINER Satanand Burla <[email protected]> Acked-by: Derek Chickles <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11MAINTAINERS: eth: mvneta: move Thomas to CREDITSJakub Kicinski2-2/+5
Thomas is still active in other bits of the kernel and beyond but not as much on the Marvell Ethernet devices. Our scripts report: Subsystem MARVELL MVNETA ETHERNET DRIVER Changes 54 / 176 (30%) (No activity) Top reviewers: [12]: [email protected] [9]: [email protected] [9]: [email protected] INACTIVE MAINTAINER Thomas Petazzoni <[email protected]> Acked-by: Thomas Petazzoni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11MAINTAINERS: eth: mt7530: move Landen Chao to CREDITSJakub Kicinski2-1/+4
mt7530 is a pretty active driver and last we have heard from Landen Chao on the list was March. There were total of 4 message from them in the last 2.5 years. I think it's time to move to CREDITS. Subsystem MEDIATEK SWITCH DRIVER Changes 94 / 169 (55%) Last activity: 2023-10-11 Arınç ÜNAL <[email protected]>: Author e94b590abfff 2023-08-19 00:00:00 12 Tags e94b590abfff 2023-08-19 00:00:00 16 Daniel Golle <[email protected]>: Author 91daa4f62ce8 2023-04-19 00:00:00 17 Tags ac49b992578d 2023-10-11 00:00:00 20 Landen Chao <[email protected]>: DENG Qingfang <[email protected]>: Author 342afce10d6f 2021-10-18 00:00:00 24 Tags 342afce10d6f 2021-10-18 00:00:00 25 Sean Wang <[email protected]>: Tags c288575f7810 2020-09-14 00:00:00 5 Top reviewers: [46]: [email protected] [29]: [email protected] [19]: [email protected] INACTIVE MAINTAINER Landen Chao <[email protected]> Acked-by: Arınç ÜNAL <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11MAINTAINERS: eth: mtk: move John to CREDITSJakub Kicinski2-1/+4
John is still active in other bits of the kernel but not much on the MediaTek ethernet switch side. Our scripts report: Subsystem MEDIATEK ETHERNET DRIVER Changes 81 / 384 (21%) Last activity: 2023-12-21 Felix Fietkau <[email protected]>: Author c6d96df9fa2c 2023-05-02 00:00:00 42 Tags c6d96df9fa2c 2023-05-02 00:00:00 48 John Crispin <[email protected]>: Sean Wang <[email protected]>: Author 880c2d4b2fdf 2019-06-03 00:00:00 5 Tags a5d75538295b 2020-04-07 00:00:00 7 Mark Lee <[email protected]>: Author 8d66a8183d0c 2019-11-14 00:00:00 4 Tags 8d66a8183d0c 2019-11-14 00:00:00 4 Lorenzo Bianconi <[email protected]>: Author 7cb8cd4daacf 2023-12-21 00:00:00 98 Tags 7cb8cd4daacf 2023-12-21 00:00:00 112 Top reviewers: [18]: [email protected] [15]: [email protected] [8]: [email protected] INACTIVE MAINTAINER John Crispin <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: John Crispin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11Merge branch 'fix-module_description-for-net-p1'Jakub Kicinski11-0/+11
Breno Leitao says: ==================== Fix MODULE_DESCRIPTION() for net (p1) There are hundreds of network modules that misses MODULE_DESCRIPTION(), causing a warnning when compiling with W=1. Example: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com90io.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/arc-rimi.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com20020.o ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11net: fill in MODULE_DESCRIPTION()s for s2ioBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Neterion 10GbE (s2io) driver. Signed-off-by: Breno Leitao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11net: fill in MODULE_DESCRIPTION()s for ds26522 moduleBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to Slic Maxim ds26522 card driver. Signed-off-by: Breno Leitao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11net: fill in MODULE_DESCRIPTION()s for Sun RPCBreno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to Sun RPC modules. Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11net: fill in MODULE_DESCRIPTION()s for NFCBreno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all NFC Controller Interface (NCI) modules. Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11net: fill in MODULE_DESCRIPTION()s for HSRBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to High-availability Seamless Redundancy (HSR) driver. Signed-off-by: Breno Leitao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11net: fill in MODULE_DESCRIPTION()s for SLIPBreno Leitao2-0/+2
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Serial Line (SLIP) protocol modules. Signed-off-by: Breno Leitao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-01-11Merge tag 'net-next-6.8' of ↵Linus Torvalds1785-108799/+91205
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "The most interesting thing is probably the networking structs reorganization and a significant amount of changes is around self-tests. Core & protocols: - Analyze and reorganize core networking structs (socks, netdev, netns, mibs) to optimize cacheline consumption and set up build time warnings to safeguard against future header changes This improves TCP performances with many concurrent connections up to 40% - Add page-pool netlink-based introspection, exposing the memory usage and recycling stats. This helps indentify bad PP users and possible leaks - Refine TCP/DCCP source port selection to no longer favor even source port at connect() time when IP_LOCAL_PORT_RANGE is set. This lowers the time taken by connect() for hosts having many active connections to the same destination - Refactor the TCP bind conflict code, shrinking related socket structs - Refactor TCP SYN-Cookie handling, as a preparation step to allow arbitrary SYN-Cookie processing via eBPF - Tune optmem_max for 0-copy usage, increasing the default value to 128KB and namespecifying it - Allow coalescing for cloned skbs coming from page pools, improving RX performances with some common configurations - Reduce extension header parsing overhead at GRO time - Add bridge MDB bulk deletion support, allowing user-space to request the deletion of matching entries - Reorder nftables struct members, to keep data accessed by the datapath first - Introduce TC block ports tracking and use. This allows supporting multicast-like behavior at the TC layer - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and classifiers (RSVP and tcindex) - More data-race annotations - Extend the diag interface to dump TCP bound-only sockets - Conditional notification of events for TC qdisc class and actions - Support for WPAN dynamic associations with nearby devices, to form a sub-network using a specific PAN ID - Implement SMCv2.1 virtual ISM device support - Add support for Batman-avd mulicast packet type BPF: - Tons of verifier improvements: - BPF register bounds logic and range support along with a large test suite - log improvements - complete precision tracking support for register spills - track aligned STACK_ZERO cases as imprecise spilled registers. This improves the verifier "instructions processed" metric from single digit to 50-60% for some programs - support for user's global BPF subprogram arguments with few commonly requested annotations for a better developer experience - support tracking of BPF_JNE which helps cases when the compiler transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the like - several fixes - Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload - Fix kCFI bugs in BPF all forms of indirect calls from BPF into kernel and from kernel into BPF work with CFI enabled. This allows BPF to work with CONFIG_FINEIBT=y - Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques - Support uid/gid options when mounting bpffs - Add a new kfunc which acquires the associated cgroup of a task within a specific cgroup v1 hierarchy where the latter is identified by its id - Extend verifier to allow bpf_refcount_acquire() of a map value field obtained via direct load which is a use-case needed in sched_ext - Add BPF link_info support for uprobe multi link along with bpftool integration for the latter - Support for VLAN tag in XDP hints - Remove deprecated bpfilter kernel leftovers given the project is developed in user-space (https://github.com/facebook/bpfilter) Misc: - Support for parellel TC self-tests execution - Increase MPTCP self-tests coverage - Updated the bridge documentation, including several so-far undocumented features - Convert all the net self-tests to run in unique netns, to avoid random failures due to conflict and allow concurrent runs - Add TCP-AO self-tests - Add kunit tests for both cfg80211 and mac80211 - Autogenerate Netlink families documentation from YAML spec - Add yml-gen support for fixed headers and recursive nests, the tool can now generate user-space code for all genetlink families for which we have specs - A bunch of additional module descriptions fixes - Catch incorrect freeing of pages belonging to a page pool Driver API: - Rust abstractions for network PHY drivers; do not cover yet the full C API, but already allow implementing functional PHY drivers in rust - Introduce queue and NAPI support in the netdev Netlink interface, allowing complete access to the device <> NAPIs <> queues relationship - Introduce notifications filtering for devlink to allow control application scale to thousands of instances - Improve PHY validation, requesting rate matching information for each ethtool link mode supported by both the PHY and host - Add support for ethtool symmetric-xor RSS hash - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD platform - Expose pin fractional frequency offset value over new DPLL generic netlink attribute - Convert older drivers to platform remove callback returning void - Add support for PHY package MMD read/write New hardware / drivers: - Ethernet: - Octeon CN10K devices - Broadcom 5760X P7 - Qualcomm SM8550 SoC - Texas Instrument DP83TG720S PHY - Bluetooth: - IMC Networks Bluetooth radio Removed: - WiFi: - libertas 16-bit PCMCIA support - Atmel at76c50x drivers - HostAP ISA/PCMCIA style 802.11b driver - zd1201 802.11b USB dongles - Orinoco ISA/PCMCIA 802.11b driver - Aviator/Raytheon driver - Planet WL3501 driver - RNDIS USB 802.11b driver Driver updates: - Ethernet high-speed NICs: - Intel (100G, ice, idpf): - allow one by one port representors creation and removal - add temperature and clock information reporting - add get/set for ethtool's header split ringparam - add again FW logging - adds support switchdev hardware packet mirroring - iavf: implement symmetric-xor RSS hash - igc: add support for concurrent physical and free-running timers - i40e: increase the allowable descriptors - nVidia/Mellanox: - Preparation for Socket-Direct multi-dev netdev. That will allow in future releases combining multiple PFs devices attached to different NUMA nodes under the same netdev - Broadcom (bnxt): - TX completion handling improvements - add basic ntuple filter support - reduce MSIX vectors usage for MQPRIO offload - add VXLAN support, USO offload and TX coalesce completion for P7 - Marvell Octeon EP: - xmit-more support - add PF-VF mailbox support and use it for FW notifications for VFs - Wangxun (ngbe/txgbe): - implement ethtool functions to operate pause param, ring param, coalesce channel number and msglevel - Netronome/Corigine (nfp): - add flow-steering support - support UDP segmentation offload - Ethernet NICs embedded, slower, virtual: - Xilinx AXI: remove duplicate DMA code adopting the dma engine driver - stmmac: add support for HW-accelerated VLAN stripping - TI AM654x sw: add mqprio, frame preemption & coalescing - gve: add support for non-4k page sizes. - virtio-net: support dynamic coalescing moderation - nVidia/Mellanox Ethernet datacenter switches: - allow firmware upgrade without a reboot - more flexible support for bridge flooding via the compressed FID flooding mode - Ethernet embedded switches: - Microchip: - fine-tune flow control and speed configurations in KSZ8xxx - KSZ88X3: enable setting rmii reference - Renesas: - add jumbo frames support - Marvell: - 88E6xxx: add "eth-mac" and "rmon" stats support - Ethernet PHYs: - aquantia: add firmware load support - at803x: refactor the driver to simplify adding support for more chip variants - NXP C45 TJA11xx: Add MACsec offload support - Wifi: - MediaTek (mt76): - NVMEM EEPROM improvements - mt7996 Extremely High Throughput (EHT) improvements - mt7996 Wireless Ethernet Dispatcher (WED) support - mt7996 36-bit DMA support - Qualcomm (ath12k): - support for a single MSI vector - WCN7850: support AP mode - Intel (iwlwifi): - new debugfs file fw_dbg_clear - allow concurrent P2P operation on DFS channels - Bluetooth: - QCA2066: support HFP offload - ISO: more broadcast-related improvements - NXP: better recovery in case receiver/transmitter get out of sync" * tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits) lan78xx: remove redundant statement in lan78xx_get_eee lan743x: remove redundant statement in lan743x_ethtool_get_eee bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer() bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel() bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter() tcp: Revert no longer abort SYN_SENT when receiving some ICMP Revert "mlx5 updates 2023-12-20" Revert "net: stmmac: Enable Per DMA Channel interrupt" ipvlan: Remove usage of the deprecated ida_simple_xx() API ipvlan: Fix a typo in a comment net/sched: Remove ipt action tests net: stmmac: Use interrupt mode INTM=1 for per channel irq net: stmmac: Add support for TX/RX channel interrupt net: stmmac: Make MSI interrupt routine generic dt-bindings: net: snps,dwmac: per channel irq net: phy: at803x: make read_status more generic net: phy: at803x: add support for cdt cross short test for qca808x net: phy: at803x: refactor qca808x cable test get status function net: phy: at803x: generalize cdt fault length function net: ethernet: cortina: Drop TSO support ...
2024-01-10Merge tag 's390-6.8-1' of ↵Linus Torvalds50-456/+518
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Alexander Gordeev: - Add machine variable capacity information to /proc/sysinfo. - Limit the waste of page tables and always align vmalloc area size and base address on segment boundary. - Fix a memory leak when an attempt to register interruption sub class (ISC) for the adjunct-processor (AP) guest failed. - Reset response code AP_RESPONSE_INVALID_GISA to understandable by guest AP_RESPONSE_INVALID_ADDRESS in response to a failed interruption sub class (ISC) registration attempt. - Improve reaction to adjunct-processor (AP) AP_RESPONSE_OTHERWISE_CHANGED response code when enabling interrupts on behalf of a guest. - Fix incorrect sysfs 'status' attribute of adjunct-processor (AP) queue device bound to the vfio_ap device driver when the mediated device is attached to a guest, but the queue device is not passed through. - Rework struct ap_card to hold the whole adjunct-processor (AP) card hardware information. As result, all the ugly bit checks are replaced by simple evaluations of the required bit fields. - Improve handling of some weird scenarios between service element (SE) host and SE guest with adjunct-processor (AP) pass-through support. - Change local_ctl_set_bit() and local_ctl_clear_bit() so they return the previous value of the to be changed control register. This is useful if a bit is only changed temporarily and the previous content needs to be restored. - The kernel starts with machine checks disabled and is expected to enable it once trap_init() is called. However the implementation allows machine checks early. Consistently enable it in trap_init() only. - local_mcck_disable() and local_mcck_enable() assume that machine checks are always enabled. Instead implement and use local_mcck_save() and local_mcck_restore() to disable machine checks and restore the previous state. - Modification of floating point control (FPC) register of a traced process using ptrace interface may lead to corruption of the FPC register of the tracing process. Fix this. - kvm_arch_vcpu_ioctl_set_fpu() allows to set the floating point control (FPC) register in vCPU, but may lead to corruption of the FPC register of the host process. Fix this. - Use READ_ONCE() to read a vCPU floating point register value from the memory mapped area. This avoids that, depending on code generation, a different value is tested for validity than the one that is used. - Get rid of test_fp_ctl(), since it is quite subtle to use it correctly. Instead copy a new floating point control register value into its save area and test the validity of the new value when loading it. - Remove superfluous save_fpu_regs() call. - Remove s390 support for ARCH_WANTS_DYNAMIC_TASK_STRUCT. All machines provide the vector facility since many years and the need to make the task structure size dependent on the vector facility does not exist. - Remove the "novx" kernel command line option, as the vector code runs without any problems since many years. - Add the vector facility to the z13 architecture level set (ALS). All hypervisors support the vector facility since many years. This allows compile time optimizations of the kernel. - Get rid of MACHINE_HAS_VX and replace it with cpu_has_vx(). As result, the compiled code will have less runtime checks and less code. - Convert pgste_get_lock() and pgste_set_unlock() ASM inlines to C. - Convert the struct subchannel spinlock from pointer to member. * tag 's390-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (24 commits) Revert "s390: update defconfigs" s390/cio: make sch->lock spinlock pointer a member s390: update defconfigs s390/mm: convert pgste locking functions to C s390/fpu: get rid of MACHINE_HAS_VX s390/als: add vector facility to z13 architecture level set s390/fpu: remove "novx" option s390/fpu: remove ARCH_WANTS_DYNAMIC_TASK_STRUCT support KVM: s390: remove superfluous save_fpu_regs() call s390/fpu: get rid of test_fp_ctl() KVM: s390: use READ_ONCE() to read fpc register value KVM: s390: fix setting of fpc register s390/ptrace: handle setting of fpc register correctly s390/nmi: implement and use local_mcck_save() / local_mcck_restore() s390/nmi: consistently enable machine checks in trap_init() s390/ctlreg: return old register contents when changing bits s390/ap: handle outband SE bind state change s390/ap: store TAPQ hwinfo in struct ap_card s390/vfio-ap: fix sysfs status attribute for AP queue devices s390/vfio-ap: improve reaction to response code 07 from PQAP(AQIC) command ...
2024-01-10Merge tag 'asm-generic-6.8' of ↵Linus Torvalds63-229/+203
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "A series from Baoquan He cleans up the asm-generic/io.h to remove the ioremap_uc() definition from everything except x86, which still needs it for pre-PAT systems. This series notably contains a patch from Jiaxun Yang that converts MIPS to use asm-generic/io.h like every other architecture does, enabling future cleanups. Some of my own patches fix -Wmissing-prototype warnings in architecture specific code across several architectures. This is now needed as the warning is enabled by default. There are still some remaining warnings in minor platforms, but the series should catch most of the widely used ones make them more consistent with one another. David McKay fixes a bug in __generic_cmpxchg_local() when this is used on 64-bit architectures. This could currently only affect parisc64 and sparc64. Additional cleanups address from Linus Walleij, Uwe Kleine-König, Thomas Huth, and Kefeng Wang help reduce unnecessary inconsistencies between architectures" * tag 'asm-generic-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: Fix 32 bit __generic_cmpxchg_local Hexagon: Make pfn accessors statics inlines ARC: mm: Make virt_to_pfn() a static inline mips: remove extraneous asm-generic/iomap.h include sparc: Use $(kecho) to announce kernel images being ready arm64: vdso32: Define BUILD_VDSO32_64 to correct prototypes csky: fix arch_jump_label_transform_static override arch: add do_page_fault prototypes arch: add missing prepare_ftrace_return() prototypes arch: vdso: consolidate gettime prototypes arch: include linux/cpu.h for trap_init() prototype arch: fix asm-offsets.c building with -Wmissing-prototypes arch: consolidate arch_irq_work_raise prototypes hexagon: Remove CONFIG_HEXAGON_ARCH_VERSION from uapi header asm/io: remove unnecessary xlate_dev_mem_ptr() and unxlate_dev_mem_ptr() mips: io: remove duplicated codes arch/*/io.h: remove ioremap_uc in some architectures mips: add <asm-generic/io.h> including
2024-01-10Merge tag 'modules-6.8-rc1' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull module updates from Luis Chamberlain: "Just one cleanup and one documentation improvement change. No functional changes" * tag 'modules-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: kernel/module: improve documentation for try_module_get() module: Remove redundant TASK_UNINTERRUPTIBLE
2024-01-10Merge tag 'sysctl-6.8-rc1' of ↵Linus Torvalds32-102/+122
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux Pull sysctl updates from Luis Chamberlain: "To help make the move of sysctls out of kernel/sysctl.c not incur a size penalty sysctl has been changed to allow us to not require the sentinel, the final empty element on the sysctl array. Joel Granados has been doing all this work. In the v6.6 kernel we got the major infrastructure changes required to support this. For v6.7 we had all arch/ and drivers/ modified to remove the sentinel. For v6.8-rc1 we get a few more updates for fs/ directory only. The kernel/ directory is left but we'll save that for v6.9-rc1 as those patches are still being reviewed. After that we then can expect also the removal of the no longer needed check for procname == NULL. Let us recap the purpose of this work: - this helps reduce the overall build time size of the kernel and run time memory consumed by the kernel by about ~64 bytes per array - the extra 64-byte penalty is no longer inncurred now when we move sysctls out from kernel/sysctl.c to their own files Thomas Weißschuh also sent a few cleanups, for v6.9-rc1 we expect to see further work by Thomas Weißschuh with the constificatin of the struct ctl_table. Due to Joel Granados's work, and to help bring in new blood, I have suggested for him to become a maintainer and he's accepted. So for v6.9-rc1 I look forward to seeing him sent you a pull request for further sysctl changes. This also removes Iurii Zaikin as a maintainer as he has moved on to other projects and has had no time to help at all" * tag 'sysctl-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: sysctl: remove struct ctl_path sysctl: delete unused define SYSCTL_PERM_EMPTY_DIR coda: Remove the now superfluous sentinel elements from ctl_table array sysctl: Remove the now superfluous sentinel elements from ctl_table array fs: Remove the now superfluous sentinel elements from ctl_table array cachefiles: Remove the now superfluous sentinel element from ctl_table array sysclt: Clarify the results of selftest run sysctl: Add a selftest for handling empty dirs sysctl: Fix out of bounds access for empty sysctl registers MAINTAINERS: Add Joel Granados as co-maintainer for proc sysctl MAINTAINERS: remove Iurii Zaikin from proc sysctl
2024-01-10Merge tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefsLinus Torvalds119-775/+1062
Pull header cleanups from Kent Overstreet: "The goal is to get sched.h down to a type only header, so the main thing happening in this patchset is splitting out various _types.h headers and dependency fixups, as well as moving some things out of sched.h to better locations. This is prep work for the memory allocation profiling patchset which adds new sched.h interdepencencies" * tag 'header_cleanup-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (51 commits) Kill sched.h dependency on rcupdate.h kill unnecessary thread_info.h include Kill unnecessary kernel.h include preempt.h: Kill dependency on list.h rseq: Split out rseq.h from sched.h LoongArch: signal.c: add header file to fix build error restart_block: Trim includes lockdep: move held_lock to lockdep_types.h sem: Split out sem_types.h uidgid: Split out uidgid_types.h seccomp: Split out seccomp_types.h refcount: Split out refcount_types.h uapi/linux/resource.h: fix include x86/signal: kill dependency on time.h syscall_user_dispatch.h: split out *_types.h mm_types_task.h: Trim dependencies Split out irqflags_types.h ipc: Kill bogus dependency on spinlock.h shm: Slim down dependencies workqueue: Split out workqueue_types.h ...
2024-01-10Merge tag 'bcachefs-2024-01-10' of https://evilpiepirate.org/git/bcachefsLinus Torvalds125-5888/+7028
Pull bcachefs updates from Kent Overstreet: - btree write buffer rewrite: instead of adding keys to the btree write buffer at transaction commit time, we now journal them with a different journal entry type and copy them from the journal to the write buffer just prior to journal write. This reduces the number of atomic operations on shared cachelines in the transaction commit path and is a signicant performance improvement on some workloads: multithreaded 4k random writes went from ~650k iops to ~850k iops. - Bring back optimistic spinning for six locks: the new implementation doesn't use osq locks; instead we add to the lock waitlist as normal, and then spin on the lock_acquired bit in the waitlist entry, _not_ the lock itself. - New ioctls: - BCH_IOCTL_DEV_USAGE_V2, which allows for new data types - BCH_IOCTL_OFFLINE_FSCK, which runs the kernel implementation of fsck but without mounting: useful for transparently using the kernel version of fsck from 'bcachefs fsck' when the kernel version is a better match for the on disk filesystem. - BCH_IOCTL_ONLINE_FSCK: online fsck. Not all passes are supported yet, but the passes that are supported are fully featured - errors may be corrected as normal. The new ioctls use the new 'thread_with_file' abstraction for kicking off a kthread that's tied to a file descriptor returned to userspace via the ioctl. - btree_paths within a btree_trans are now dynamically growable, instead of being limited to 64. This is important for the check_directory_structure phase of fsck, and also fixes some issues we were having with btree path overflow in the reflink btree. - Trigger refactoring; prep work for the upcoming disk space accounting rewrite - Numerous bugfixes :) * tag 'bcachefs-2024-01-10' of https://evilpiepirate.org/git/bcachefs: (226 commits) bcachefs: eytzinger0_find() search should be const bcachefs: move "ptrs not changing" optimization to bch2_trigger_extent() bcachefs: fix simulateously upgrading & downgrading bcachefs: Restart recovery passes more reliably bcachefs: bch2_dump_bset() doesn't choke on u64s == 0 bcachefs: improve checksum error messages bcachefs: improve validate_bset_keys() bcachefs: print sb magic when relevant bcachefs: __bch2_sb_field_to_text() bcachefs: %pg is banished bcachefs: Improve would_deadlock trace event bcachefs: fsck_err()s don't need to manually check c->sb.version anymore bcachefs: Upgrades now specify errors to fix, like downgrades bcachefs: no thread_with_file in userspace bcachefs: Don't autofix errors we can't fix bcachefs: add missing bch2_latency_acct() call bcachefs: increase max_active on io_complete_wq bcachefs: add time_stats for btree_node_read_done() bcachefs: don't clear accessed bit in btree node fill bcachefs: Add an option to control btree node prefetching ...
Powered by cgit, Gruvboxed by Blaster4385.