| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Any link state change that's done prior to net device registration
isn't reflected on the state, thus the operational state is left
obsolete, with 'UNKNOWN' status.
To resolve the issue, query link state from FW upon open operations
to ensure operational state is updated.
Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC")
Signed-off-by: Lama Kayal <[email protected]>
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix the args to fprintf(). Splitting the message ends up passing
incorrect arg for "sigurg %d" and an extra arg overall. The test
result message ends up incorrect.
test_unix_oob.c: In function ‘main’:
test_unix_oob.c:274:43: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘char *’ [-Wformat=]
274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ",
| ~^
| |
| int
| %s
275 | "atmark %d\n", signal_recvd, len, oob, atmark);
| ~~~~~~~~~~~~~
| |
| char *
test_unix_oob.c:274:19: warning: too many arguments for format [-Wformat-extra-args]
274 | fprintf(stderr, "Test 3 failed, sigurg %d len %d OOB %c ",
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Due to the inclusion of nvmem handling into the mac-address getter
function of_get_mac_address() by
commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address")
it is now possible to get a -EPROBE_DEFER return code. Which did cause
bgmac to assign a random ethernet address.
This exact issue happened on my Meraki MR32. The nvmem provider is
an EEPROM (at24c64) which gets instantiated once the module
driver is loaded... This happens once the filesystem becomes available.
With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error.
Then the driver subsystem will reschedule the probe at a later time.
Cc: Petr Štetiar <[email protected]>
Cc: Michael Walle <[email protected]>
Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address")
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
on error
Commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal")
decided it was fine to ignore errors on certain ports that fail to
probe, and go on with the ports that do probe fine.
Commit fb6ec87f7229 ("net: dsa: Fix type was not set for devlink port")
noticed that devlink_port_type_eth_set(dlp, dp->slave); does not get
called, and devlink notices after a timeout of 3600 seconds and prints a
WARN_ON. So it went ahead to unregister the devlink port. And because
there exists an UNUSED port flavour, we actually re-register the devlink
port as UNUSED.
Commit 08156ba430b4 ("net: dsa: Add devlink port regions support to
DSA") added devlink port regions, which are set up by the driver and not
by DSA.
When we trigger the devlink port deregistration and reregistration as
unused, devlink now prints another WARN_ON, from here:
devlink_port_unregister:
WARN_ON(!list_empty(&devlink_port->region_list));
So the port still has regions, which makes sense, because they were set
up by the driver, and the driver doesn't know we're unregistering the
devlink port.
Somebody needs to tear them down, and optionally (actually it would be
nice, to be consistent) set them up again for the new devlink port.
But DSA's layering stays in our way quite badly here.
The options I've considered are:
1. Introduce a function in devlink to just change a port's type and
flavour. No dice, devlink keeps a lot of state, it really wants the
port to not be registered when you set its parameters, so changing
anything can only be done by destroying what we currently have and
recreating it.
2. Make DSA cache the parameters passed to dsa_devlink_port_region_create,
and the region returned, keep those in a list, then when the devlink
port unregister needs to take place, the existing devlink regions are
destroyed by DSA, and we replay the creation of new regions using the
cached parameters. Problem: mv88e6xxx keeps the region pointers in
chip->ports[port].region, and these will remain stale after DSA frees
them. There are many things DSA can do, but updating mv88e6xxx's
private pointers is not one of them.
3. Just let the driver do it (i.e. introduce a very specific method
called ds->ops->port_reinit_as_unused, which unregisters its devlink
port devlink regions, then the old devlink port, then registers the
new one, then the devlink port regions for it). While it does work,
as opposed to the others, it's pretty horrible from an API
perspective and we can do better.
4. Introduce a new pair of methods, ->port_setup and ->port_teardown,
which in the case of mv88e6xxx must register and unregister the
devlink port regions. Call these 2 methods when the port must be
reinitialized as unused.
Naturally, I went for the 4th approach.
Fixes: 08156ba430b4 ("net: dsa: Add devlink port regions support to DSA")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The MODULE_DEVICE_TABLE already creates proper alias for platform
driver. Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Colin Foster says:
====================
ocelot phylink fixes
When the ocelot driver was migrated to phylink, e6e12df625f2 ("net:
mscc: ocelot: convert to phylink") there were two additional writes to
registers that became stale. One write was to DEV_CLOCK_CFG and one was
to ANA_PFC_PCF_CFG.
Both of these writes referenced the variable "speed" which originally
was set to OCELOT_SPEED_{10,100,1000,2500}. These macros expand to
values of 3, 2, 1, or 0, respectively. After the update, the variable
speed is set to SPEED_{10,100,1000,2500} which expand to 10, 100, 1000,
and 2500. So invalid values were getting written to the two registers,
which would lead to either a lack of functionality or undefined
funcationality.
Fixing these values was the intent of v1 of this patch set - submitted
as "[PATCH v1 net] net: ethernet: mscc: ocelot: bug fix when writing MAC
speed"
During that review it was determined that both writes were actually
unnecessary. DEV_CLOCK_CFG is a duplicate write, so can be removed
entirely. This was accidentally submitted as as a new, lone patch titled
"[PATCH v1 net] net: mscc: ocelot: remove buggy duplicate write to
DEV_CLOCK_CFG". This is part of what is considered v2 of this patch set.
Additionally, the write to ANA_PFC_PFC_CFG is also unnecessary. Priority
flow contol is disabled, so configuring it is useless and should be
removed. This was also submitted as a new, lone patch titled "[PATCH v1
net] net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFG".
This is the rest of what is considered v2 of this patch set.
v3
Identical to v2, but fixes the patch numbering to v3 and submitting the
two changes as a patch set.
v2
Note: I misunderstood and submitted two new "v1" patches instead of a
single "v2" patch set.
- Remove the buggy writes altogher
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
When updating ocelot to use phylink, a second write to DEV_CLOCK_CFG was
mistakenly left in. It used the variable "speed" which, previously, would
would have been assigned a value of OCELOT_SPEED_1000. In phylink the
variable is be SPEED_1000, which is invalid for the
DEV_CLOCK_LINK_SPEED macro. Removing it as unnecessary and buggy.
Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A useless write to ANA_PFC_PFC_CFG was left in while refactoring ocelot to
phylink. Since priority flow control is disabled, writing the speed has no
effect.
Further, it was using ethtool.h SPEED_ instead of OCELOT_SPEED_ macros,
which are incorrectly offset for GENMASK.
Lastly, for priority flow control to properly function, some scenarios
would rely on the rate adaptation from the PCS while the MAC speed would
be fixed. So it isn't used, and even if it was, neither "speed" nor
"mac_speed" are necessarily the correct values to be used.
Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
lock_sock_fast() and lock_sock_nested() contain lockdep annotations for the
sock::sk_lock.owned 'mutex'. sock::sk_lock.owned is not a regular mutex. It
is just lockdep wise equivalent. In fact it's an open coded trivial mutex
implementation with some interesting features.
sock::sk_lock.slock is a regular spinlock protecting the 'mutex'
representation sock::sk_lock.owned which is a plain boolean. If 'owned' is
true, then some other task holds the 'mutex', otherwise it is uncontended.
As this locking construct is obviously endangered by lock ordering issues as
any other locking primitive it got lockdep annotated via a dedicated
dependency map sock::sk_lock.dep_map which has to be updated at the lock
and unlock sites.
lock_sock_nested() is a straight forward 'mutex' lock operation:
might_sleep();
spin_lock_bh(sock::sk_lock.slock)
while (!try_lock(sock::sk_lock.owned)) {
spin_unlock_bh(sock::sk_lock.slock);
wait_for_release();
spin_lock_bh(sock::sk_lock.slock);
}
The lockdep annotation for sock::sk_lock.owned is for unknown reasons
_after_ the lock has been acquired, i.e. after the code block above and
after releasing sock::sk_lock.slock, but inside the bottom halves disabled
region:
spin_unlock(sock::sk_lock.slock);
mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
local_bh_enable();
The placement after the unlock is obvious because otherwise the
mutex_acquire() would nest into the spin lock held region.
But that's from the lockdep perspective still the wrong place:
1) The mutex_acquire() is issued _after_ the successful acquisition which
is pointless because in a dead lock scenario this point is never
reached which means that if the deadlock is the first instance of
exposing the wrong lock order lockdep does not have a chance to detect
it.
2) It only works because lockdep is rather lax on the context from which
the mutex_acquire() is issued. Acquiring a mutex inside a bottom halves
and therefore non-preemptible region is obviously invalid, except for a
trylock which is clearly not the case here.
This 'works' stops working on RT enabled kernels where the bottom halves
serialization is done via a local lock, which exposes this misplacement
because the 'mutex' and the local lock nest the wrong way around and
lockdep complains rightfully about a lock inversion.
The placement is wrong since the initial commit a5b5bb9a053a ("[PATCH]
lockdep: annotate sk_locks") which introduced this.
Fix it by moving the mutex_acquire() in front of the actual lock
acquisition, which is what the regular mutex_lock() operation does as well.
lock_sock_fast() is not that straight forward. It looks at the first glance
like a convoluted trylock operation:
spin_lock_bh(sock::sk_lock.slock)
if (!sock::sk_lock.owned)
return false;
while (!try_lock(sock::sk_lock.owned)) {
spin_unlock_bh(sock::sk_lock.slock);
wait_for_release();
spin_lock_bh(sock::sk_lock.slock);
}
spin_unlock(sock::sk_lock.slock);
mutex_acquire(&sk->sk_lock.dep_map, subclass, 0, _RET_IP_);
local_bh_enable();
return true;
But that's not the case: lock_sock_fast() is an interesting optimization
for short critical sections which can run with bottom halves disabled and
sock::sk_lock.slock held. This allows to shortcut the 'mutex' operation in
the non contended case by preventing other lockers to acquire
sock::sk_lock.owned because they are blocked on sock::sk_lock.slock, which
in turn avoids the overhead of doing the heavy processing in release_sock()
including waking up wait queue waiters.
In the contended case, i.e. when sock::sk_lock.owned == true the behavior
is the same as lock_sock_nested().
Semantically this shortcut means, that the task acquired the 'mutex' even
if it does not touch the sock::sk_lock.owned field in the non-contended
case. Not telling lockdep about this shortcut acquisition is hiding
potential lock ordering violations in the fast path.
As a consequence the same reasoning as for the above lock_sock_nested()
case vs. the placement of the lockdep annotation applies.
The current placement of the lockdep annotation was just copied from
the original lock_sock(), now renamed to lock_sock_nested(),
implementation.
Fix this by moving the mutex_acquire() in front of the actual lock
acquisition and adding the corresponding mutex_release() into
unlock_sock_fast(). Also document the fast path return case with a comment.
Reported-by: Sebastian Siewior <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The file sja1105.txt was converted to nxp,sja1105.yaml.
Signed-off-by: Alejandro Concepcion-Rodriguez <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is
not available to the igc driver. Make this driver depend on
PTP_1588_CLOCK_OPTIONAL so that it will build without errors.
Various igc commits have used ptp_*() functions without checking
that PTP_1588_CLOCK is enabled. Fix all of these here.
Fixes these build errors:
ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other':
igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event'
ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event'
ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event'
ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info':
igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225':
igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin'
ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init':
igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register'
ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop':
igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister'
ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe':
Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS")
Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command")
Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225")
Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Ederson de Souza <[email protected]>
Cc: Tony Nguyen <[email protected]>
Cc: Vinicius Costa Gomes <[email protected]>
Cc: Jeff Kirsher <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Jesse Brandeburg <[email protected]>
Cc: [email protected]
Acked-by: Vinicius Costa Gomes <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The only struct dim_sample member that does not get
initialized by dim_update_sample() is comp_ctr. (There
is special API to initialize comp_ctr:
dim_update_sample_with_comps(), and it is currently used
only for RDMA.) comp_ctr is used to compute curr_stats->cmps
and curr_stats->cpe_ratio (see dim_calc_stats()) which in
turn are consumed by the rdma_dim_*() API. Therefore,
functionally, the net_dim*() API consumers are not affected.
Nevertheless, fix the computation of statistics based
on an uninitialized variable, even if the mentioned statistics
are not used at the moment.
Fixes: ae0e6a5d1627 ("enetc: Add adaptive interrupt coalescing")
Signed-off-by: Claudiu Manoil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
irq_set_affinity_hit() stores a reference to the cpumask_t
parameter in the irq descriptor, and that reference can be
accessed later from irq_affinity_hint_proc_show(). Since
the cpu_mask parameter passed to irq_set_affinity_hit() has
only temporary storage (it's on the stack memory), later
accesses to it are illegal. Thus reads from the corresponding
procfs affinity_hint file can result in paging request oops.
The issue is fixed by the get_cpu_mask() helper, which provides
a permanent storage for the cpumask_t parameter.
Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Claudiu Manoil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We try to use build_skb() if we had sufficient tailroom. But we forget
to release the unused pages chained via private in big mode which will
leak pages. Fixing this by release the pages after building the skb in
big mode.
Cc: Xuan Zhuo <[email protected]>
Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom")
Signed-off-by: Jason Wang <[email protected]>
Reviewed-by: Xuan Zhuo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the
special considerations for the head of the SKB no longer apply. Don't
mistakenly report ERROR to the frontend for the first entry in the list,
even if - from all I can tell - this shouldn't matter much as the overall
transmit will need to be considered failed anyway.
Signed-off-by: Jan Beulich <[email protected]>
Reviewed-by: Paul Durrant <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Vladimir Oltean says:
====================
Make DSA switch drivers compatible with masters which unregister on shutdown
Changes in v2:
- fix build for b53_mmap
- use unregister_netdevice_many
It was reported by Lino here:
https://lore.kernel.org/netdev/[email protected]/
that when the DSA master attempts to unregister its net_device on
shutdown, DSA should prevent that operation from succeeding because it
holds a reference to it. This hangs the shutdown process.
This issue was essentially introduced in commit 2f1e8ea726e9 ("net: dsa:
link interfaces with the DSA master to get rid of lockdep warnings").
The present series patches all DSA drivers to handle that case,
depending on whether those drivers were introduced before or after the
offending commit, a different Fixes: tag is specified for them.
The approach taken by this series solves the issue in essentially the
same way as Lino's patches, except for three key differences:
- this series takes a more minimal approach in what is done on shutdown,
we do not attempt a full tree teardown as that is not strictly
necessary. I might revisit this if there are compelling reasons to do
otherwise
- this series fixes the issues for all DSA drivers, not just KSZ9897
- this series works even if the ->remove driver method gets called for
the same device too, not just ->shutdown. This is really possible to
happen for SPI device drivers, and potentially possible for other bus
device drivers too.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA
master to get rid of lockdep warnings"), DSA gained a requirement which
it did not fulfill, which is to unlink itself from the DSA master at
shutdown time.
Since the Arrow SpeedChips XRS700x driver was introduced after the bad
commit, it has never worked with DSA masters which decide to unregister
their net_device on shutdown, effectively hanging the reboot process.
To fix that, we need to call dsa_switch_shutdown.
These devices can be connected by I2C or by MDIO, and if I search for
I2C or MDIO bus drivers that implement their ->shutdown by redirecting
it to ->remove I don't see any, however this does not mean it would not
be possible. To be compatible with that pattern, it is necessary to
implement an "if this then not that" scheme, to avoid ->remove and
->shutdown from being called both for the same struct device.
Fixes: ee00b24f32eb ("net: dsa: add Arrow SpeedChips XRS700x driver")
Link: https://lore.kernel.org/netdev/[email protected]/
Reported-by: Lino Sanfilippo <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: George McCollister <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
shutdown
Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA
master to get rid of lockdep warnings"), DSA gained a requirement which
it did not fulfill, which is to unlink itself from the DSA master at
shutdown time.
Since the Microchip sub-driver for KSZ8863 was introduced after the bad
commit, it has never worked with DSA masters which decide to unregister
their net_device on shutdown, effectively hanging the reboot process.
To fix that, we need to call dsa_switch_shutdown.
Since this driver expects the MDIO bus to be backed by mdio_bitbang, I
don't think there is currently any MDIO bus driver which implements its
->shutdown by redirecting it to ->remove, but in any case, to be
compatible with that pattern, it is necessary to implement an "if this
then not that" scheme, to avoid ->remove and ->shutdown from being
called both for the same struct device.
Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support")
Link: https://lore.kernel.org/netdev/[email protected]/
Reported-by: Lino Sanfilippo <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA
master to get rid of lockdep warnings"), DSA gained a requirement which
it did not fulfill, which is to unlink itself from the DSA master at
shutdown time.
Since the hellcreek driver was introduced after the bad commit, it has
never worked with DSA masters which decide to unregister their
net_device on shutdown, effectively hanging the reboot process.
Hellcreek is a platform device driver, so we probably cannot have the
oddities of ->shutdown and ->remove getting both called for the exact
same struct device. But to be in line with the pattern from the other
device drivers which are on slow buses, implement the same "if this then
not that" pattern of either running the ->shutdown or the ->remove hook.
The driver's current ->remove implementation makes that very easy
because it already zeroes out its device_drvdata on ->remove.
Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches")
Link: https://lore.kernel.org/netdev/[email protected]/
Reported-by: Lino Sanfilippo <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Acked-by: Kurt Kanzenbach <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Lino reports that on his system with bcmgenet as DSA master and KSZ9897
as a switch, rebooting or shutting down never works properly.
What does the bcmgenet driver have special to trigger this, that other
DSA masters do not? It has an implementation of ->shutdown which simply
calls its ->remove implementation. Otherwise said, it unregisters its
network interface on shutdown.
This message can be seen in a loop, and it hangs the reboot process there:
unregister_netdevice: waiting for eth0 to become free. Usage count = 3
So why 3?
A usage count of 1 is normal for a registered network interface, and any
virtual interface which links itself as an upper of that will increment
it via dev_hold. In the case of DSA, this is the call path:
dsa_slave_create
-> netdev_upper_dev_link
-> __netdev_upper_dev_link
-> __netdev_adjacent_dev_insert
-> dev_hold
So a DSA switch with 3 interfaces will result in a usage count elevated
by two, and netdev_wait_allrefs will wait until they have gone away.
Other stacked interfaces, like VLAN, watch NETDEV_UNREGISTER events and
delete themselves, but DSA cannot just vanish and go poof, at most it
can unbind itself from the switch devices, but that must happen strictly
earlier compared to when the DSA master unregisters its net_device, so
reacting on the NETDEV_UNREGISTER event is way too late.
It seems that it is a pretty established pattern to have a driver's
->shutdown hook redirect to its ->remove hook, so the same code is
executed regardless of whether the driver is unbound from the device, or
the system is just shutting down. As Florian puts it, it is quite a big
hammer for bcmgenet to unregister its net_device during shutdown, but
having a common code path with the driver unbind helps ensure it is well
tested.
So DSA, for better or for worse, has to live with that and engage in an
arms race of implementing the ->shutdown hook too, from all individual
drivers, and do something sane when paired with masters that unregister
their net_device there. The only sane thing to do, of course, is to
unlink from the master.
However, complications arise really quickly.
The pattern of redirecting ->shutdown to ->remove is not unique to
bcmgenet or even to net_device drivers. In fact, SPI controllers do it
too (see dspi_shutdown -> dspi_remove), and presumably, I2C controllers
and MDIO controllers do it too (this is something I have not researched
too deeply, but even if this is not the case today, it is certainly
plausible to happen in the future, and must be taken into consideration).
Since DSA switches might be SPI devices, I2C devices, MDIO devices, the
insane implication is that for the exact same DSA switch device, we
might have both ->shutdown and ->remove getting called.
So we need to do something with that insane environment. The pattern
I've come up with is "if this, then not that", so if either ->shutdown
or ->remove gets called, we set the device's drvdata to NULL, and in the
other hook, we check whether the drvdata is NULL and just do nothing.
This is probably not necessary for platform devices, just for devices on
buses, but I would really insist for consistency among drivers, because
when code is copy-pasted, it is not always copy-pasted from the best
sources.
So depending on whether the DSA switch's ->remove or ->shutdown will get
called first, we cannot really guarantee even for the same driver if
rebooting will result in the same code path on all platforms. But
nonetheless, we need to do something minimally reasonable on ->shutdown
too to fix the bug. Of course, the ->remove will do more (a full
teardown of the tree, with all data structures freed, and this is why
the bug was not caught for so long). The new ->shutdown method is kept
separate from dsa_unregister_switch not because we couldn't have
unregistered the switch, but simply in the interest of doing something
quick and to the point.
The big question is: does the DSA switch's ->shutdown get called earlier
than the DSA master's ->shutdown? If not, there is still a risk that we
might still trigger the WARN_ON in unregister_netdevice that says we are
attempting to unregister a net_device which has uppers. That's no good.
Although the reference to the master net_device won't physically go away
even if DSA's ->shutdown comes afterwards, remember we have a dev_hold
on it.
The answer to that question lies in this comment above device_link_add:
* A side effect of the link creation is re-ordering of dpm_list and the
* devices_kset list by moving the consumer device and all devices depending
* on it to the ends of these lists (that does not happen to devices that have
* not been registered when this function is called).
so the fact that DSA uses device_link_add towards its master is not
exactly for nothing. device_shutdown() walks devices_kset from the back,
so this is our guarantee that DSA's shutdown happens before the master's
shutdown.
Fixes: 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings")
Link: https://lore.kernel.org/netdev/[email protected]/
Reported-by: Lino Sanfilippo <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Tested-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
MDIO-attached devices might have interrupts and other things that might
need quiesced when we kexec into a new kernel. Things are even more
creepy when those interrupt lines are shared, and in that case it is
absolutely mandatory to disable all interrupt sources.
Moreover, MDIO devices might be DSA switches, and DSA needs its own
shutdown method to unlink from the DSA master, which is a new
requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link
interfaces with the DSA master to get rid of lockdep warnings").
So introduce a ->shutdown method in the MDIO device driver structure.
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Similar to commit 589834b3a009 ("kbuild: Add
-Werror=unknown-warning-option to CLANG_FLAGS").
Clang ignores certain GCC flags that it has not implemented, only
emitting a warning:
$ echo | clang -fsyntax-only -falign-jumps -x c -
clang-14: warning: optimization flag '-falign-jumps' is not supported
[-Wignored-optimization-argument]
When one of these flags gets added to KBUILD_CFLAGS unconditionally, all
subsequent cc-{disable-warning,option} calls fail because -Werror was
added to these invocations to turn the above warning and the equivalent
-W flag warning into errors.
To catch the presence of these flags earlier, turn
-Wignored-optimization-argument into an error so that the flags can
either be implemented or ignored via cc-option and there are no more
weird errors.
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
clang does not support -falign-jumps and only recently gained support
for -falign-loops. When one of the configuration options that adds these
flags is enabled, clang warns and all cc-{disable-warning,option} that
follow fail because -Werror gets added to test for the presence of this
warning:
clang-14: warning: optimization flag '-falign-jumps=0' is not supported
[-Wignored-optimization-argument]
To resolve this, add a couple of cc-option calls when building with
clang; gcc has supported these options since 3.2 so there is no point in
testing for their support. -falign-functions was implemented in clang-7,
-falign-loops was implemented in clang-14, and -falign-jumps has not
been implemented yet.
Link: https://lore.kernel.org/r/[email protected]/
Link: https://lore.kernel.org/r/[email protected]/
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Acked-by: Borislav Petkov <[email protected]>
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Change comment "create one <module>.mod.c file pr. module"
to "create one <module>.mod.c file per module"
Signed-off-by: Ramji Jiyani <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
make:
arch/sh/boot/Makefile:87: FORCE prerequisite is missing
Add the missing FORCE prerequisites for all build targets identified by
"make help".
Fixes: e1f86d7b4b2a5213 ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
We need to import the 'sys' package since the script has called
sys.exit() method.
Fixes: 6ad7cbc01527 ("Makefile: Add clang-tidy and static analyzer support to makefile")
Signed-off-by: Kortan <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
When parsing Kconfig files to find symbol definitions and references,
lines after a 'help' line are skipped until a new config definition
starts.
However, Kconfig statements can actually be after a help section, as
long as these have shallower indentation. These are skipped by the
parser.
This means that symbols referenced in this kind of statements are
ignored by this function and thus are not considered undefined
references in case the symbol is not defined.
Remove the 'skip' logic entirely, as it is not needed if we just use the
STMT regex to find the end of help lines.
However, this means that keywords that appear as part of the help
message (i.e. with the same indentation as the help lines) it will be
considered as a reference/definition. This can happen now as well, but
only with REGEX_KCONFIG_DEF lines. Also, the keyword must have a SYMBOL
after it, which probably means that someone referenced a config in the
help so it seems like a bonus :)
The real solution is to keep track of the indentation when a the first
help line in encountered and then handle DEF and STMT lines only if the
indentation is shallower.
Signed-off-by: Ariel Marcovitch <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
As opposed to the --diff option, --commit can get ref names instead of
commit hashes.
When using the --commit option, the script resets the working directory
to the commit before the given ref, by adding '~' to the end of the ref.
However, the 'HEAD' ref is relative, and so when the working directory
is reset to 'HEAD~', 'HEAD' points to what was 'HEAD~'. Then when the
script resets to 'HEAD' it actually stays in the same commit. In this
case, the script won't report any cases because there is no diff between
the cases of the two refs.
Prevent the user from using HEAD refs.
A better solution might be to resolve the refs before doing the
reset, but for now just disallow such refs.
Signed-off-by: Ariel Marcovitch <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
We already had the implementation for __udiv_qrnnd (unsigned divide for
multi-precision arithmetic) as part of the alpha math emulation code.
But you can disable the math emulation code - even if you shouldn't -
and then the MPI code that actually wants this functionality (and is
needed by various crypto functions) will fail to build.
So move the extended-precision divide code to be a regular library
function, just like all the regular division code is. That way ie is
available regardless of math-emulation.
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Ok, it almost certainly is still broken on actual hardware, but the
immediate reason for it having been marked BROKEN was a build error that
is fixed by just making sure the low-level IO header file is included
sufficiently early that the __EXTERN_INLINE hackery takes effect.
This was marked broken back in 2017 by commit 1883c9f49d02 ("alpha: mark
jensen as broken"), but Ulrich Teichert made me look at it as part of my
cross-build work to make sure -Werror actually does the right thing.
There are lots of alpha configurations that do not build cleanly, but
now it's no longer because Jensen wouldn't be buildable. That said,
because the Jensen platform doesn't force PCI to be enabled (Jensen only
had EISA), it ends up being somewhat interesting as a source of odd
configs.
Reported-by: Ulrich Teichert <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Perf code re-implements libbpf's btf__load_from_kernel_by_id() API as
a weak function, presumably to dynamically link against old version of
libbpf shared library. Unfortunately this causes compilation warning
when perf is compiled against libbpf v0.6+.
For now, just ignore deprecation warning, but there might be a better
solution, depending on perf's needs.
Signed-off-by: Andrii Nakryiko <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: [email protected]
LPU-Reference: [email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
FD uses xyarray__entry that may return NULL if an index is out of
bounds. If NULL is returned then a segv happens as FD unconditionally
dereferences the pointer. This was happening in a case of with perf
iostat as shown below. The fix is to make FD an "int*" rather than an
int and handle the NULL case as either invalid input or a closed fd.
$ sudo gdb --args perf stat --iostat list
...
Breakpoint 1, perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
50 {
(gdb) bt
#0 perf_evsel__alloc_fd (evsel=0x5555560951a0, ncpus=1, nthreads=1) at evsel.c:50
#1 0x000055555585c188 in evsel__open_cpu (evsel=0x5555560951a0, cpus=0x555556093410,
threads=0x555556086fb0, start_cpu=0, end_cpu=1) at util/evsel.c:1792
#2 0x000055555585cfb2 in evsel__open (evsel=0x5555560951a0, cpus=0x0, threads=0x555556086fb0)
at util/evsel.c:2045
#3 0x000055555585d0db in evsel__open_per_thread (evsel=0x5555560951a0, threads=0x555556086fb0)
at util/evsel.c:2065
#4 0x00005555558ece64 in create_perf_stat_counter (evsel=0x5555560951a0,
config=0x555555c34700 <stat_config>, target=0x555555c2f1c0 <target>, cpu=0) at util/stat.c:590
#5 0x000055555578e927 in __run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
at builtin-stat.c:833
#6 0x000055555578f3c6 in run_perf_stat (argc=1, argv=0x7fffffffe4a0, run_idx=0)
at builtin-stat.c:1048
#7 0x0000555555792ee5 in cmd_stat (argc=1, argv=0x7fffffffe4a0) at builtin-stat.c:2534
#8 0x0000555555835ed3 in run_builtin (p=0x555555c3f540 <commands+288>, argc=3,
argv=0x7fffffffe4a0) at perf.c:313
#9 0x0000555555836154 in handle_internal_command (argc=3, argv=0x7fffffffe4a0) at perf.c:365
#10 0x000055555583629f in run_argv (argcp=0x7fffffffe2ec, argv=0x7fffffffe2e0) at perf.c:409
#11 0x0000555555836692 in main (argc=3, argv=0x7fffffffe4a0) at perf.c:539
...
(gdb) c
Continuing.
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/).
/bin/dmesg | grep -i perf may provide additional information.
Program received signal SIGSEGV, Segmentation fault.
0x00005555559b03ea in perf_evsel__close_fd_cpu (evsel=0x5555560951a0, cpu=1) at evsel.c:166
166 if (FD(evsel, cpu, thread) >= 0)
v3. fixes a bug in perf_evsel__run_ioctl where the sense of a branch was
backward.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It's later supposed to be either a correct address or NULL. Without the
initialization, it may contain an undefined value which results in the
following segmentation fault:
# perf top --sort comm -g --ignore-callees=do_idle
terminates with:
#0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6
#1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6
#2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489
#3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564
#4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420,
sample_self=sample_self@entry=true) at util/hist.c:657
#5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0,
sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288
#6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38)
at util/hist.c:1056
#7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056
#8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0)
at util/hist.c:1231
#9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0)
at builtin-top.c:842
#10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202
#11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244
#12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323
#13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339
#14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341
#15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339
#16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114
#17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0
#18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6
If you look at the frame #2, the code is:
488 if (he->srcline) {
489 he->srcline = strdup(he->srcline);
490 if (he->srcline == NULL)
491 goto err_rawdata;
492 }
If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish),
it gets strdupped and strdupping a rubbish random string causes the problem.
Also, if you look at the commit 1fb7d06a509e, it adds the srcline property
into the struct, but not initializing it everywhere needed.
Committer notes:
Now I see, when using --ignore-callees=do_idle we end up here at line
2189 in add_callchain_ip():
2181 if (al.sym != NULL) {
2182 if (perf_hpp_list.parent && !*parent &&
2183 symbol__match_regex(al.sym, &parent_regex))
2184 *parent = al.sym;
2185 else if (have_ignore_callees && root_al &&
2186 symbol__match_regex(al.sym, &ignore_callees_regex)) {
2187 /* Treat this symbol as the root,
2188 forgetting its callees. */
2189 *root_al = al;
2190 callchain_cursor_reset(cursor);
2191 }
2192 }
And the al that doesn't have the ->srcline field initialized will be
copied to the root_al, so then, back to:
1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al,
1212 int max_stack_depth, void *arg)
1213 {
1214 int err, err2;
1215 struct map *alm = NULL;
1216
1217 if (al)
1218 alm = map__get(al->map);
1219
1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent,
1221 iter->evsel, al, max_stack_depth);
1222 if (err) {
1223 map__put(alm);
1224 return err;
1225 }
1226
1227 err = iter->ops->prepare_entry(iter, al);
1228 if (err)
1229 goto out;
1230
1231 err = iter->ops->add_single_entry(iter, al);
1232 if (err)
1233 goto out;
1234
That al at line 1221 is what hist_entry_iter__add() (called from
sample__resolve_callchain()) saw as 'root_al', and then:
iter->ops->add_single_entry(iter, al);
will go on with al->srcline with a bogus value, I'll add the above
sequence to the cset and apply, thanks!
Signed-off-by: Michael Petlan <[email protected]>
CC: Milian Wolff <[email protected]>
Cc: Jiri Olsa <[email protected]>
Fixes: 1fb7d06a509e ("perf report Use srcline from callchain for hist entries")
Link: https //lore.kernel.org/r/[email protected]
Reported-by: Juri Lelli <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
set_print_ip_opts() was not being called when type != attr->type
because there is not a one-to-one relationship between output types
and attr->type. That resulted in ip not printing.
The attr_type() function is removed, and the match of attr->type to
output type is corrected.
Example on ADL using taskset to select an atom cpu:
# perf record -e cpu_atom/cpu-cycles/ taskset 0x1000 uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.003 MB perf.data (7 samples) ]
Before:
# perf script | head
taskset 428 [-01] 10394.179041: 1 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179043: 1 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179044: 11 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179045: 407 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179046: 16789 cpu_atom/cpu-cycles/:
taskset 428 [-01] 10394.179052: 676300 cpu_atom/cpu-cycles/:
uname 428 [-01] 10394.179278: 4079859 cpu_atom/cpu-cycles/:
After:
# perf script | head
taskset 428 10394.179041: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179043: 1 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179044: 11 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179045: 407 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179046: 16789 cpu_atom/cpu-cycles/: ffffffff95a0bb97 __intel_pmu_enable_all.constprop.48+0x47 ([kernel.kallsyms])
taskset 428 10394.179052: 676300 cpu_atom/cpu-cycles/: 7f829ef73800 cfree+0x0 (/lib/libc-2.32.so)
uname 428 10394.179278: 4079859 cpu_atom/cpu-cycles/: ffffffff95bae912 vma_interval_tree_remove+0x1f2 ([kernel.kallsyms])
Signed-off-by: Adrian Hunter <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Cc: Jin Yao <[email protected]>
Cc: Jiri Olsa <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Some x86 microarchitectures fuse a subset of cmp/test/ALU instructions
with branch instructions, and thus perf annotate highlight such valid
pairs as fused.
When annotated with source, perf uses struct disasm_line to contain
either source or instruction line from objdump output. Usually, a C
statement generates multiple instructions which include such
cmp/test/ALU + branch instruction pairs. But in case of assembly
function, each individual assembly source line generate one
instruction.
The 'perf annotate' instruction fusion logic assumes the previous
disasm_line as the previous instruction line, which is wrong because,
for assembly function, previous disasm_line contains source line. And
thus perf fails to highlight valid fused instruction pairs for assembly
functions.
Fix it by searching backward until we find an instruction line and
consider that disasm_line as fused with current branch instruction.
Before:
│ cmpq %rcx, RIP+8(%rsp)
0.00 │ cmp %rcx,0x88(%rsp)
│ je .Lerror_bad_iret <--- Source line
0.14 │ ┌──je b4 <--- Instruction line
│ │movl %ecx, %eax
After:
│ cmpq %rcx, RIP+8(%rsp)
0.00 │ ┌──cmp %rcx,0x88(%rsp)
│ │je .Lerror_bad_iret
0.14 │ ├──je b4
│ │movl %ecx, %eax
Reviewed-by: Jin Yao <[email protected]>
Signed-off-by: Ravi Bangoria <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https //lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix potential out-of-range access during secure boot facility
detection.
- Fully validate the VMA before calling follow_pte() in pci code.
- Remove arch specific WARN_DYNAMIC_STACK config option.
- Fix zcrypto kernel doc comments.
- Update defconfigs.
* tag 's390-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: remove WARN_DYNAMIC_STACK
s390/ap: fix kernel doc comments
s390: update defconfigs
s390/sclp: fix Secure-IPL facility detection
s390/pci_mmio: fully validate the VMA before calling follow_pte()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Revert fw_devlink tracking 'phy-handle' links. This broke at least a
few platforms. A better solution is being worked on.
- Add Samsung UFS binding which fell thru the cracks
- Doc reference fixes from Mauro
- Fix for restricted DMA error handling
* tag 'devicetree-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: arm: Fix Toradex compatible typo
of: restricted dma: Fix condition for rmem init
dt-bindings: arm: mediatek: mmsys: update mediatek,mmsys.yaml reference
dt-bindings: net: dsa: sja1105: update nxp,sja1105.yaml reference
dt-bindings: ufs: Add bindings for Samsung ufs host
Revert "of: property: fw_devlink: Add support for "phy-handle" property"
|
|
The TGA boards were based on the DECchip 21030 PCI graphics accelerator
used mainly for alpha, and existed in a TURBOchannel (TC) version for
the DECstation (MIPS) workstations.
However, the config option for the TGA code is a bit confused, and says
depends on FB && (ALPHA || TC)
because people didn't really want to enable the option for random PCI
environments, so the "ALPHA" stands in for that case (while the TC case
is then the MIPS DECstation case).
So that config dependency is kind of a mixture of architecture and bus
choices. But it's incorrect, in that there were non-PCI-based alpha
hardware, and then the driver just causes warnings:
drivers/video/fbdev/tgafb.c:1532:13: error: ‘tgafb_unregister’ defined but not used [-Werror=unused-function]
1532 | static void tgafb_unregister(struct device *dev)
| ^~~~~~~~~~~~~~~~
drivers/video/fbdev/tgafb.c:1387:12: error: ‘tgafb_register’ defined but not used [-Werror=unused-function]
1387 | static int tgafb_register(struct device *dev)
| ^~~~~~~~~~~~~~
so let's make the config option dependencies a bit more explict:
depends on FB
depends on PCI || TC
depends on ALPHA || TC
where that first "FB" is the software configuration dependency, the
second "PCI || TC" is the hardware bus dependency, while that final
"ALPHA || TC" dependency is the "don't bother asking except for these
situations.
We could make that third case have "COMPILE_TEST" as an option, and mark
the register/unregister functions as __maybe_unused, but I'm not sure
it's really worth it.
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The "idx" is validated at the start of the loop but it gets incremented
during the iteration so it needs to be checked again.
Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20210909091336.GA26312@kili
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The ssp_print_mcu_debug() function should return negative error codes on
error. Returning "length" is meaningless. This change does not affect
runtime because the callers only care about zero/non-zero.
Reported-by: Jonathan Cameron <[email protected]>
Fixes: 50dd64d57eee ("iio: common: ssp_sensors: Add sensorhub driver")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/20210914105333.GA11657@kili
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The Jensen IO functions are overly copmplicated because some of the IO
addresses refer to special 'local IO' ports, and they get accessed
differently.
That then makes gcc not actually inline them, and since they were marked
"extern inline" when included through the regular <asm/io.h> path, and
then only marked "inline" when included from sys_jensen.c, you never
necessarily got a body for the IO functions at all.
The intent of the sys_jensen.c code is to actually get the non-inlined
copy generated, so remove the 'inline' from the magic macro that is
supposed to sort this all out.
Also, do not mix 'extern inline' functions (that may or may not be
inlined and will not generate a function body if they are not) with
'static inline' (that _will_ generate a function body when not inlined).
Because gcc will complain about this situation:
error: ‘jensen_bus_outb’ is static but used in inline function ‘jensen_outb’ which is not static
because gcc basically doesn't know whether to generate a body for that
static inline function or not for that call site.
So make all of these use that __EXTERN_INLINE marker. Gcc will
generally not inline these things on use, and then generate the function
body out-of-line in sys_jensen.c.
This makes the core IO functions build for the alpha Jensen config.
Not that the rest then builds, because it turns out Jensen also doesn't
enable PCI, which then makes other drievrs very unhappy, but that's a
separate issue.
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being
empty, and the only use of tegra_slink_runtime_{resume,suspend} goes
away, resulting in
drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function]
1200 | static int tegra_slink_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function]
1188 | static int tegra_slink_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
mark the functions __maybe_unused to make the build happy.
This hits the alpha allmodconfig build (and others).
Reported-by: Guenter Roeck <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add validation to check whether req->InputBufferLength is smaller than
smb2_ea_info_req structure size.
Cc: Ronnie Sahlberg <[email protected]>
Cc: Ralph Böhme <[email protected]>
Cc: Steve French <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Because of .., files outside the share directory
could be accessed. To prevent this, normalize
the given path and remove all . and ..
components.
In addition to the usual large set of regression tests (smbtorture
and xfstests), ran various tests on this to specifically check
path name validation including libsmb2 tests to verify path
normalization:
./examples/smb2-ls-async smb://172.30.1.15/homes2/../
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../../
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/../
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/..bar/
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar../
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar..
./examples/smb2-ls-async smb://172.30.1.15/homes2/foo/bar../../../../
Signed-off-by: Hyunchul Lee <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Close file immediately when lock is set.
Cc: [email protected] # 5.13+
Signed-off-by: Rohith Surabattula <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Below traces are observed during fsstress and system got hung.
[ 130.698396] watchdog: BUG: soft lockup - CPU#6 stuck for 26s!
Cc: [email protected] # 5.13+
Signed-off-by: Rohith Surabattula <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
During unlink/rename instead of closing all the deferred handles
under tcon, close only handles under the requested dentry.
Signed-off-by: Rohith Surabattula <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Fix board compatible typo reported by dtbs_check.
Fixes: f4d1577e9bc6 ("dt-bindings: arm: Convert Tegra board/soc bindings to json-schema")
Signed-off-by: David Heidelberg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
of_dma_set_restricted_buffer fails to handle negative return values from
of_property_count_elems_of_size, e.g. when the property does not exist.
This results in an attempt to assign a non-existent reserved memory
region to the device and a warning being printed. Fix the condition to
take negative values into account.
Fixes: f3cfd136aef0 ("of: restricted dma: Don't fail device probe on rmem init failure")
Cc: Will Deacon <[email protected]>
Signed-off-by: David Brazdil <[email protected]>
Acked-by: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one in the intel_pstate driver and one
in the core.
Specifics:
- Prevent intel_pstate from avoiding to use HWP, even if instructed
to do so via the kernel command line, when HWP has been enabled
already by the platform firmware (Doug Smythies).
- Prevent use-after-free from occurring in the schedutil cpufreq
governor on exit by fixing a core helper function that attempts to
access memory associated with a kobject after calling kobject_put()
on it (James Morse)"
* tag 'pm-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory
cpufreq: intel_pstate: Override parameters if HWP forced by BIOS
|