aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-11-15Merge branch 'for-4.15/upstream' into for-linusJiri Kosina7-8/+29
- cp2112: GPIO error handling and Kconfig fixes from Sébastien Szymanski - i2c-hid: fixup / quirk for Apollo-Lake based laptops, from Hans de Goede - Input/Core: add eraser tool support, from Ping Cheng - small assorted code fixes Signed-off-by: Jiri Kosina <[email protected]>
2017-11-15Merge branch 'for-4.15/sony' into for-linusJiri Kosina1-4/+10
- SHANWAN PS3 rumble fix from Bastien Nocera Signed-off-by: Jiri Kosina <[email protected]>
2017-11-15Merge branch 'for-4.15/multitouch' into for-linusJiri Kosina2-0/+43
- make sure that we forward MSC_TIMESTAMP in accordance to the specification, from Nicolas Boichat Signed-off-by: Jiri Kosina <[email protected]>
2017-11-15Merge branch 'for-4.15/logitech' into for-linusJiri Kosina2-4/+4
- small code fixes for Logitech driver from Colin Ian King
2017-11-15Merge branch 'for-4.15/hyperv' into for-linusJiri Kosina1-1/+1
- trivial printk() line termination fix for HyperV
2017-11-15Merge branch 'for-4.15/asus' into for-linusJiri Kosina3-2/+32
- Asus laptop fixes (fn keys, backlight), from Mustafa Kuscu and Maxime Bellengé
2017-11-15Merge branch 'for-4.15/alps' into for-linusJiri Kosina8573-244105/+330395
- New ALPS touchpad (T4, found currently on HP EliteBook 1000, Zbook Stduio and HP Elite book x360) support from Masaki Ota
2017-11-15Merge branch 'for-4.14/upstream-fixes' into for-linusJiri Kosina6-3/+18
- Wacom: recognize PEN application collection properly, from Jason Gerecke - RMI: avoid cofusion caused by RMI functions being by mistake called on non-RMI devices, from Andrew Duggan - small device-ID-specific quirks/fixes Signed-off-by: Jiri Kosina <[email protected]>
2017-11-15Merge branch 'for-4.15/callbacks' into for-linusJiri Kosina10-17/+1114
This pulls in an infrastructure/API that allows livepatch writers to register pre-patch and post-patch callbacks that allow for running a glue code necessary for finalizing the patching if necessary. Conflicts: kernel/livepatch/core.c - trivial conflict by adding a callback call into module going notifier vs. moving that code block to klp_cleanup_module_patches_limited() Signed-off-by: Jiri Kosina <[email protected]>
2017-11-15Merge branch 'for-4.15/shadow-variables' into for-linusJiri Kosina9-4/+1048
Shadow variables allow callers to associate new shadow fields to existing data structures. This is intended to be used by livepatch modules seeking to emulate additions to data structure definitions.
2017-11-14dax: fix general protection fault in dax_alloc_inodeMikulas Patocka1-0/+3
Don't crash in case of allocation failure in dax_alloc_inode. syzkaller hit the following crash on e4880bc5dfb1 kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access [..] RIP: 0010:dax_alloc_inode+0x3b/0x70 drivers/dax/super.c:348 Call Trace: alloc_inode+0x65/0x180 fs/inode.c:208 new_inode_pseudo+0x69/0x190 fs/inode.c:890 new_inode+0x1c/0x40 fs/inode.c:919 mount_pseudo_xattr+0x288/0x560 fs/libfs.c:261 mount_pseudo include/linux/fs.h:2137 [inline] dax_mount+0x2e/0x40 drivers/dax/super.c:388 mount_fs+0x66/0x2d0 fs/super.c:1223 Cc: <[email protected]> Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider...") Reported-by: syzbot <[email protected]> Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2017-11-15openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_startGustavo A. R. Silva1-1/+1
It seems that the intention of the code is to null check the value returned by function genlmsg_put. But the current code is null checking the address of the pointer that holds the value returned by genlmsg_put. Fix this by properly null checking the value returned by function genlmsg_put in order to avoid a pontential null pointer dereference. Addresses-Coverity-ID: 1461561 ("Dereference before null check") Addresses-Coverity-ID: 1461562 ("Dereference null return value") Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure") Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-11-15Merge branch 'netem-fix-compilation-on-32-bit'David S. Miller1-10/+7
Stephen Hemminger says: ==================== netem: fix compilation on 32 bit A couple of places where 64 bit CPU was being assumed incorrectly. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-11-15netem: remove unnecessary 64 bit modulusStephen Hemminger1-3/+3
Fix compilation on 32 bit platforms (where doing modulus operation with 64 bit requires extra glibc functions) by truncation. The jitter for table distribution is limited to a 32 bit value because random numbers are scaled as 32 bit value. Also fix some whitespace. Fixes: 99803171ef04 ("netem: add uapi to express delay and jitter in nanoseconds") Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-11-15netem: use 64 bit divide by rateStephen Hemminger1-7/+4
Since times are now expressed in nanosecond, need to now do true 64 bit divide. Old code would truncate rate at 32 bits. Rename function to better express current usage. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-11-15tcp: Namespace-ify sysctl_tcp_default_congestion_controlStephen Hemminger7-54/+64
Make default TCP default congestion control to a per namespace value. This changes default congestion control to a pointer to congestion ops (rather than implicit as first element of available lsit). The congestion control setting of new namespaces is inherited from the current setting of the root namespace. Signed-off-by: Stephen Hemminger <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-11-15net: Protect iterations over net::fib_notifier_ops in fib_seq_sum()Kirill Tkhai1-1/+3
There is at least unlocked deletion of net->ipv4.fib_notifier_ops from net::fib_notifier_ops: ip_fib_net_exit() rtnl_unlock() fib4_notifier_exit() fib_notifier_ops_unregister(net->ipv4.notifier_ops) list_del_rcu(&ops->list) So fib_seq_sum() can't use rtnl_lock() only for protection. The possible solution could be to use rtnl_lock() in fib_notifier_ops_unregister(), but this adds a possible delay during net namespace creation, so we better use rcu_read_lock() till someone really needs the mutex (if that happens). Signed-off-by: Kirill Tkhai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-11-15ipv6: set all.accept_dad to 0 by defaultNicolas Dichtel1-1/+1
With commits 35e015e1f577 and a2d3f3e33853, the global 'accept_dad' flag is also taken into account (default value is 1). If either global or per-interface flag is non-zero, DAD will be enabled on a given interface. This is not backward compatible: before those patches, the user could disable DAD just by setting the per-interface flag to 0. Now, the user instead needs to set both flags to 0 to actually disable DAD. Restore the previous behaviour by setting the default for the global 'accept_dad' flag to 0. This way, DAD is still enabled by default, as per-interface flags are set to 1 on device creation, but setting them to 0 is enough to disable DAD on a given interface. - Before 35e015e1f57a7 and a2d3f3e33853: global per-interface DAD enabled [default] 1 1 yes X 0 no X 1 yes - After 35e015e1f577 and a2d3f3e33853: global per-interface DAD enabled [default] 1 1 yes 0 0 no 0 1 yes 1 0 yes - After this fix: global per-interface DAD enabled 1 1 yes 0 0 no [default] 0 1 yes 1 0 yes Fixes: 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers") Fixes: a2d3f3e33853 ("ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real") CC: Stefano Brivio <[email protected]> CC: Matteo Croce <[email protected]> CC: Erik Kline <[email protected]> Signed-off-by: Nicolas Dichtel <[email protected]> Acked-by: Stefano Brivio <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-11-15uapi: fix linux/tls.h userspace compilation errorDmitry V. Levin2-4/+4
Move inclusion of a private kernel header <net/tcp.h> from uapi/linux/tls.h to its only user - net/tls.h, to fix the following linux/tls.h userspace compilation error: /usr/include/linux/tls.h:41:21: fatal error: net/tcp.h: No such file or directory As to this point uapi/linux/tls.h was totaly unusuable for userspace, cleanup this header file further by moving other redundant includes to net/tls.h. Fixes: 3c4d7559159b ("tls: kernel TLS support") Cc: <[email protected]> # v4.13+ Signed-off-by: Dmitry V. Levin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-11-15usbnet: ipheth: prevent TX queue timeouts when device not readyAlexander Kappner1-9/+21
iOS devices require the host to be "trusted" before servicing network packets. Establishing trust requires the user to confirm a dialog on the iOS device.Until trust is established, the iOS device will silently discard network packets from the host. Currently, the ipheth driver does not detect whether an iOS device has established trust with the host, and immediately sets up the transmit queues. This causes the following problems: - Kernel taint due to WARN() in netdev watchdog. - Dmesg spam ("TX timeout"). - Disruption of user space networking activity (dhcpd, etc...) when new interface comes up but cannot be used. - Unnecessary host and device wakeups and USB traffic Example dmesg output: [ 1101.319778] NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out [ 1101.319817] ------------[ cut here ]------------ [ 1101.319828] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x20f/0x220 [ 1101.319831] Modules linked in: ipheth usbmon nvidia_drm(PO) nvidia_modeset(PO) nvidia(PO) iwlmvm mac80211 iwlwifi btusb btrtl btbcm btintel qmi_wwan bluetooth cfg80211 ecdh_generic thinkpad_acpi rfkill [last unloaded: ipheth] [ 1101.319861] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P O 4.13.12.1 #1 [ 1101.319864] Hardware name: LENOVO 20ENCTO1WW/20ENCTO1WW, BIOS N1EET62W (1.35 ) 11/10/2016 [ 1101.319867] task: ffffffff81e11500 task.stack: ffffffff81e00000 [ 1101.319873] RIP: 0010:dev_watchdog+0x20f/0x220 [ 1101.319876] RSP: 0018:ffff8810a3c03e98 EFLAGS: 00010292 [ 1101.319880] RAX: 000000000000003a RBX: 0000000000000000 RCX: 0000000000000000 [ 1101.319883] RDX: ffff8810a3c15c48 RSI: ffffffff81ccbfc2 RDI: 00000000ffffffff [ 1101.319886] RBP: ffff880c04ebc41c R08: 0000000000000000 R09: 0000000000000379 [ 1101.319889] R10: 00000100696589d0 R11: 0000000000000378 R12: ffff880c04ebc000 [ 1101.319892] R13: 0000000000000000 R14: 0000000000000001 R15: ffff880c2865fc80 [ 1101.319896] FS: 0000000000000000(0000) GS:ffff8810a3c00000(0000) knlGS:0000000000000000 [ 1101.319899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1101.319902] CR2: 00007f3ff24ac000 CR3: 0000000001e0a000 CR4: 00000000003406f0 [ 1101.319905] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1101.319908] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1101.319910] Call Trace: [ 1101.319914] <IRQ> [ 1101.319921] ? dev_graft_qdisc+0x70/0x70 [ 1101.319928] ? dev_graft_qdisc+0x70/0x70 [ 1101.319934] ? call_timer_fn+0x2e/0x170 [ 1101.319939] ? dev_graft_qdisc+0x70/0x70 [ 1101.319944] ? run_timer_softirq+0x1ea/0x440 [ 1101.319951] ? timerqueue_add+0x54/0x80 [ 1101.319956] ? enqueue_hrtimer+0x38/0xa0 [ 1101.319963] ? __do_softirq+0xed/0x2e7 [ 1101.319970] ? irq_exit+0xb4/0xc0 [ 1101.319976] ? smp_apic_timer_interrupt+0x39/0x50 [ 1101.319981] ? apic_timer_interrupt+0x8c/0xa0 [ 1101.319983] </IRQ> [ 1101.319992] ? cpuidle_enter_state+0xfa/0x2a0 [ 1101.319999] ? do_idle+0x1a3/0x1f0 [ 1101.320004] ? cpu_startup_entry+0x5f/0x70 [ 1101.320011] ? start_kernel+0x444/0x44c [ 1101.320017] ? early_idt_handler_array+0x120/0x120 [ 1101.320023] ? x86_64_start_kernel+0x145/0x154 [ 1101.320028] ? secondary_startup_64+0x9f/0x9f [ 1101.320033] Code: 20 04 00 00 eb 9f 4c 89 e7 c6 05 59 44 71 00 01 e8 a7 df fd ff 89 d9 4c 89 e6 48 c7 c7 70 b7 cd 81 48 89 c2 31 c0 e8 97 64 90 ff <0f> ff eb bf 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 [ 1101.320103] ---[ end trace 0cc4d251e2b57080 ]--- [ 1101.320110] ipheth 1-5:4.2: ipheth_tx_timeout: TX timeout The last message "TX timeout" is repeated every 5 seconds until trust is established or the device is disconnected, filling up dmesg. The proposed patch eliminates the problem by, upon connection, keeping the TX queue and carrier disabled until a packet is first received from the iOS device. This is reflected by the confirmed_pairing variable in the device structure. Only after at least one packet has been received from the iOS device, the transmit queue and carrier are brought up during the periodic device poll in ipheth_carrier_set. Because the iOS device will always send a packet immediately upon trust being established, this should not delay the interface becoming useable. To prevent failed UBRs in ipheth_rcvbulk_callback from perpetually re-enabling the queue if it was disabled, a new check is added so only successful transfers re-enable the queue, whereas failed transfers only trigger an immediate poll. This has the added benefit of removing the periodic control requests to the iOS device until trust has been established and thus should reduce wakeup events on both the host and the iOS device. Signed-off-by: Alexander Kappner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-11-15vhost_net: conditionally enable tx pollingJason Wang1-0/+2
We always poll tx for socket, this is sub optimal since this will slightly increase the waitqueue traversing time and more important, vhost could not benefit from commit 9e641bdcfa4e ("net-tun: restructure tun_do_read for better sleep/wakeup efficiency") even if we've stopped rx polling during handle_rx(), tx poll were still left in the waitqueue. Pktgen from a remote host to VM over mlx4 on two 2.00GHz Xeon E5-2650 shows 11.7% improvements on rx PPS. (from 1.28Mpps to 1.44Mpps) Cc: Wei Xu <[email protected]> Cc: Matthew Rosato <[email protected]> Signed-off-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-11-15uapi: fix linux/rxrpc.h userspace compilation errorsDmitry V. Levin1-5/+5
Consistently use types provided by <linux/types.h> to fix the following linux/rxrpc.h userspace compilation errors: /usr/include/linux/rxrpc.h:24:2: error: unknown type name 'u16' u16 srx_service; /* service desired */ /usr/include/linux/rxrpc.h:25:2: error: unknown type name 'u16' u16 transport_type; /* type of transport socket (SOCK_DGRAM) */ /usr/include/linux/rxrpc.h:26:2: error: unknown type name 'u16' u16 transport_len; /* length of transport address */ Use __kernel_sa_family_t instead of sa_family_t the same way as uapi/linux/in.h does, to fix the following linux/rxrpc.h userspace compilation errors: /usr/include/linux/rxrpc.h:23:2: error: unknown type name 'sa_family_t' sa_family_t srx_family; /* address family */ /usr/include/linux/rxrpc.h:28:3: error: unknown type name 'sa_family_t' sa_family_t family; /* transport address family */ Fixes: 727f8914477e ("rxrpc: Expose UAPI definitions to userspace") Cc: <[email protected]> # v4.14 Signed-off-by: Dmitry V. Levin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-11-14dax: fix PMD faults on zero-length filesJeff Moyer1-3/+3
PMD faults on a zero length file on a file system mounted with -o dax will not generate SIGBUS as expected. fd = open(...O_TRUNC); addr = mmap(NULL, 2*1024*1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); *addr = 'a'; <expect SIGBUS> The problem is this code in dax_iomap_pmd_fault: max_pgoff = (i_size_read(inode) - 1) >> PAGE_SHIFT; If the inode size is zero, we end up with a max_pgoff that is way larger than 0. :) Fix it by using DIV_ROUND_UP, as is done elsewhere in the kernel. I tested this with some simple test code that ensured that SIGBUS was received where expected. Cc: <[email protected]> Fixes: 642261ac995e ("dax: add struct iomap based DAX PMD support") Signed-off-by: Jeff Moyer <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2017-11-15powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 featureMichael Ellerman4-11/+12
Recently we added a CPU feature for Power9 DD2.0, to capture the fact that some workarounds are required only on Power9 DD1 and DD2.0 but not DD2.1 or later. Then in commit 9d2f510a66ec ("powerpc/64s/idle: avoid POWER9 DD1 and DD2.0 ERAT workaround on DD2.1") and commit e3646330cf66 "powerpc/64s/idle: avoid POWER9 DD1 and DD2.0 PMU workaround on DD2.1") we changed CPU_FTR_SECTIONs to check for DD1 or DD20, eg: BEGIN_FTR_SECTION PPC_INVALIDATE_ERAT END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1 | CPU_FTR_POWER9_DD20) Unfortunately although this reads as "if set DD1 or DD2.0", the or is a bitwise or and actually generates a mask of both bits. The code that does the feature patching then checks that the value of the CPU features masked with that mask are equal to the mask. So the end result is we're checking for DD1 and DD20 being set, which never happens. Yes the API is terrible. Removing the ERAT workaround on DD2.0 results in random SEGVs, the system tends to boot, but things randomly die including sometimes dhclient, udev etc. To fix the problem and hopefully avoid it in future, we remove the DD2.0 CPU feature and instead add a DD2.1 (or later) feature. This allows us to easily express that the workarounds are required if DD2.1 is not set. At some point we will drop the DD1 workarounds entirely and some of this can be cleaned up. Fixes: 9d2f510a66ec ("powerpc/64s/idle: avoid POWER9 DD1 and DD2.0 ERAT workaround on DD2.1") Fixes: e3646330cf66 ("powerpc/64s/idle: avoid POWER9 DD1 and DD2.0 PMU workaround on DD2.1") Signed-off-by: Michael Ellerman <[email protected]>
2017-11-14block, bfq: move debug blkio stats behind CONFIG_DEBUG_BLK_CGROUPLuca Miccio4-79/+125
BFQ currently creates, and updates, its own instance of the whole set of blkio statistics that cfq creates. Yet, from the comments of Tejun Heo in [1], it turned out that most of these statistics are meant/useful only for debugging. This commit makes BFQ create the latter, debugging statistics only if the option CONFIG_DEBUG_BLK_CGROUP is set. By doing so, this commit also enables BFQ to enjoy a high perfomance boost. The reason is that, if CONFIG_DEBUG_BLK_CGROUP is not set, then BFQ has to update far fewer statistics, and, in particular, not the heaviest to update. To give an idea of the benefits, if CONFIG_DEBUG_BLK_CGROUP is not set, then, on an Intel i7-4850HQ, and with 8 threads doing random I/O in parallel on null_blk (configured with 0 latency), the throughput of BFQ grows from 310 to 400 KIOPS (+30%). We have measured similar or even much higher boosts with other CPUs: e.g., +45% with an ARM CortexTM-A53 Octa-core. Our results have been obtained and can be reproduced very easily with the script in [1]. [1] https://www.spinics.net/lists/linux-block/msg18943.html Suggested-by: Tejun Heo <[email protected]> Suggested-by: Ulf Hansson <[email protected]> Tested-by: Lee Tibbert <[email protected]> Tested-by: Oleksandr Natalenko <[email protected]> Signed-off-by: Luca Miccio <[email protected]> Signed-off-by: Paolo Valente <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-11-14block, bfq: update blkio stats outside the scheduler lockPaolo Valente3-15/+102
bfq invokes various blkg_*stats_* functions to update the statistics contained in the special files blkio.bfq.* in the blkio controller groups, i.e., the I/O accounting related to the proportional-share policy provided by bfq. The execution of these functions takes a considerable percentage, about 40%, of the total per-request execution time of bfq (i.e., of the sum of the execution time of all the bfq functions that have to be executed to process an I/O request from its creation to its destruction). This reduces the request-processing rate sustainable by bfq noticeably, even on a multicore CPU. In fact, the bfq functions that invoke blkg_*stats_* functions cannot be executed in parallel with the rest of the code of bfq, because both are executed under the same same per-device scheduler lock. To reduce this slowdown, this commit moves, wherever possible, the invocation of these functions (more precisely, of the bfq functions that invoke blkg_*stats_* functions) outside the critical sections protected by the scheduler lock. With this change, and with all blkio.bfq.* statistics enabled, the throughput grows, e.g., from 250 to 310 KIOPS (+25%) on an Intel i7-4850HQ, in case of 8 threads doing random I/O in parallel on null_blk, with the latter configured with 0 latency. We obtained the same or higher throughput boosts, up to +30%, with other processors (some figures are reported in the documentation). For our tests, we used the script [1], with which our results can be easily reproduced. NOTE. This commit still protects the invocation of blkg_*stats_* functions with the request_queue lock, because the group these functions are invoked on may otherwise disappear before or while these functions are executed. Fortunately, tests without even this lock show, by difference, that the serialization caused by this lock has a little impact (at most ~5% of throughput reduction). [1] https://github.com/Algodev-github/IOSpeed Tested-by: Lee Tibbert <[email protected]> Tested-by: Oleksandr Natalenko <[email protected]> Signed-off-by: Paolo Valente <[email protected]> Signed-off-by: Luca Miccio <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-11-14block, bfq: add missing invocations of bfqg_stats_update_io_add/removeLuca Miccio1-3/+18
bfqg_stats_update_io_add and bfqg_stats_update_io_remove are to be invoked, respectively, when an I/O request enters and when an I/O request exits the scheduler. Unfortunately, bfq does not fully comply with this scheme, because it does not invoke these functions for requests that are inserted into or extracted from its priority dispatch list. This commit fixes this mistake. Tested-by: Lee Tibbert <[email protected]> Tested-by: Oleksandr Natalenko <[email protected]> Signed-off-by: Paolo Valente <[email protected]> Signed-off-by: Luca Miccio <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-11-14doc, block, bfq: update max IOPS sustainable with BFQPaolo Valente1-6/+11
We have investigated more deeply the performance of BFQ, in terms of number of IOPS that can be processed by the CPU when BFQ is used as I/O scheduler. In more detail, using the script [1], we have measured the number of IOPS reached on top of a null block device configured with zero latency, as a function of the workload (sequential read, sequential write, random read, random write) and of the system (we considered desktops, laptops and embedded systems). Basing on the resulting figures, with this commit we update the current, conservative IOPS range reported in BFQ documentation. In particular, the documentation now reports, for each of three different systems, the lowest number of IOPS obtained for that system with the above test (namely, the value obtained with the workload leading to the lowest IOPS). [1] https://github.com/Algodev-github/IOSpeed Reviewed-by: Lee Tibbert <[email protected]> Signed-off-by: Paolo Valente <[email protected]> Signed-off-by: Luca Miccio <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-11-14ide: Make ide_cdrom_prep_fs() initialize the sense buffer pointerBart Van Assche1-2/+1
The changes introduced through commit 82ed4db499b8 assume that the sense buffer pointer in struct scsi_request is initialized for all requests - passthrough and filesystem requests. Hence make sure that that pointer is initialized for filesystem requests. Remove the memset() call that clears .cmd because the scsi_req_init() call in ide_initialize_rq() already initializes the .cmd. Fixes: commit 82ed4db499b8 ("block: split scsi_request out of struct request") Signed-off-by: Bart Van Assche <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Hongxu Jia <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-11-14md: Convert timers to use timer_setup()Kees Cook5-21/+16
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Kent Overstreet <[email protected]> Cc: Shaohua Li <[email protected]> Cc: Alasdair Kergon <[email protected]> Cc: Mike Snitzer <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Reviewed-by: Michael Lyle <[email protected]> Reviewed-by: Mike Snitzer <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-11-14block: swim3: Convert timers to use timer_setup()Kees Cook1-16/+15
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jens Axboe <[email protected]> Cc: Johannes Thumshirn <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Arvind Yadav <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-11-14block/aoe: Convert timers to use timer_setup()Kees Cook2-9/+6
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jens Axboe <[email protected]> Cc: "Ed L. Cashin" <[email protected]> Cc: [email protected] Cc: Thomas Gleixner <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-11-14amifloppy: Convert timers to use timer_setup()Kees Cook1-31/+26
This converts the amifloppy driver to pass the timer pointer to the callback instead of the drive number (and flags). It eliminates the decusagecounter flag, as it was unused, and drops the ininterrupt flag which appeared to be a needless optimization. The drive can then be calculated from the offset of the timer in the drive timer array. Additionally moves to a static data variable instead of the soon-to-be-gone timer->data field. Cc: Jens Axboe <[email protected]> Cc: Krzysztof Halasa <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-11-14block/floppy: Convert callback to pass timer_listKees Cook1-3/+7
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to passing in the timer pointer explicitly. Calculate the drive from the offset of the timer in the timer list. Cc: Jiri Kosina <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Ming Lei <[email protected]> Cc: Al Viro <[email protected]> Cc: Geliang Tang <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-11-14Merge tag 'devicetree-for-4.15' of ↵Linus Torvalds237-1439/+3136
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "A bigger diffstat than usual with the kbuild changes and a tree wide fix in the binding documentation. Summary: - kbuild cleanups and improvements for dtbs - Code clean-up of overlay code and fixing for some long standing memory leak and race condition in applying overlays - Improvements to DT memory usage making sysfs/kobjects optional and skipping unflattening of disabled nodes. This is part of kernel tinification efforts. - Final piece of removing storing the full path for every DT node. The prerequisite conversion of printk's to use device_node format specifier happened in 4.14. - Sync with current upstream dtc. This brings additional checks to dtb compiling. - Binding doc tree wide removal of leading 0s from examples - RTC binding documentation adding missing devices and some consolidation of duplicated bindings - Vendor prefix documentation for nutsboard, Silicon Storage Technology, shimafuji, Tecon Microprocessor Technologies, DH electronics GmbH, Opal Kelly, and Next Thing" * tag 'devicetree-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits) dt-bindings: usb: add #phy-cells to usb-nop-xceiv dt-bindings: Remove leading zeros from bindings notation kbuild: handle dtb-y and CONFIG_OF_ALL_DTBS natively in Makefile.lib MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry kbuild: clean up *.dtb and *.dtb.S patterns from top-level Makefile .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore .gitignore: sort normal pattern rules alphabetically dt-bindings: add vendor prefix for Next Thing Co. scripts/dtc: Update to upstream version v1.4.5-6-gc1e55a5513e9 of: dynamic: fix memory leak related to properties of __of_node_dup of: overlay: make pr_err() string unique of: overlay: pr_err from return NOTIFY_OK to overlay apply/remove of: overlay: remove unneeded check for NULL kbasename() of: overlay: remove a dependency on device node full_name of: overlay: simplify applying symbols from an overlay of: overlay: avoid race condition between applying multiple overlays of: overlay: loosen overly strict phandle clash check of: overlay: expand check of whether overlay changeset can be removed of: overlay: detect cases where device tree may become corrupt of: overlay: minor restructuring ...
2017-11-14Merge tag 'leds_for_4.15rc1' of ↵Linus Torvalds14-31/+627
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "New LED class driver: - add a driver for PC Engines APU/APU2 LEDs New LED trigger: - add a system activity LED trigger LED core improvements: - replace flags bit shift with BIT() macros Convert timers to use timer_setup() in: - led-core - ledtrig-activity - ledtrig-heartbeat - ledtrig-transient LED class drivers fixes: - lp55xx: fix spelling mistake: 'cound' -> 'could' - tca6507: Remove unnecessary reg check - pca955x: Don't invert requested value in pca955x_gpio_set_value() LED documentation improvements: - update 00-INDEX file" * tag 'leds_for_4.15rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: Add driver for PC Engines APU/APU2 LEDs leds: lp55xx: fix spelling mistake: 'cound' -> 'could' leds: Convert timers to use timer_setup() Documentation: leds: Update 00-INDEX file leds: tca6507: Remove unnecessary reg check leds: ledtrig-heartbeat: Convert timers to use timer_setup() leds: Replace flags bit shift with BIT() macros leds: pca955x: Don't invert requested value in pca955x_gpio_set_value() leds: ledtrig-activity: Add a system activity LED trigger
2017-11-14Merge branch 'for-linus' of ↵Linus Torvalds55-731/+2776
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - three new touchscreen drivers: EETI EXC3000, HiDeep, and Samsung S6SY761 - the timer API conversion (setup_timer() -> timer_setup()) - a few drivers swiytched to using managed API for creating custom device attributes - other assorted fixed and cleanups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits) Input: gamecon - mark expected switch fall-throughs Input: sidewinder - mark expected switch fall-throughs Input: spaceball - mark expected switch fall-throughs Input: uinput - unlock on allocation failure in ioctl Input: add support for the Samsung S6SY761 touchscreen Input: add support for HiDeep touchscreen Input: st1232 - remove obsolete platform device support Input: convert autorepeat timer to use timer_setup() media: ttpci: remove autorepeat handling and use timer_setup Input: cyttsp4 - avoid overflows when calculating memory sizes Input: mxs-lradc - remove redundant assignment to pointer input Input: add I2C attached EETI EXC3000 multi touch driver Input: goodix - support gt1151 touchpanel Input: ps2-gpio - actually abort probe when connected to sleeping GPIOs Input: hil_mlc - convert to using timer_setup() Input: hp_sdc - convert to using timer_setup() Input: touchsceen - convert timers to use timer_setup() Input: keyboard - convert timers to use timer_setup() Input: uinput - fold header into the driver proper Input: uinput - remove uinput_allocate_device() ...
2017-11-14Merge tag 'sound-4.15-rc1' of ↵Linus Torvalds345-44387/+9146
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There are no big surprising changes in this cycle, yet not too boring, either. The biggest change from diffstat POV is the removal of the legacy OSS driver codes that have been already disabled for a long time. This will bring a few trivial merge conflicts. As new features in ASoC side, there are two things: a new AC97 bus implementation and AMD Stony platform support. Both include the relevant changes shared with other subsystems, e.g. AC97 MFD changes and DRM AMD changes. Some other highlighted topics are: - A bunch of USB-audio drivers got the hardening against the malicious device accesses with a new helper code for endpoint sanity check - Lots of cleanups for ASoC Intel platform code, including support for their open source audio firmware - Continued ASoC core componentization works - Support for scaling MCLK with sample rate in ASoC simple-card - Stabler PCM hot-unplug capability, especially for ASoC usages" * tag 'sound-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (302 commits) Documentation: sound: hd-audio: notes.rst ASoC: bcm2835: Support left/right justified and DSP modes ASoC: bcm2835: Enforce full symmetry ASoC: bcm2835: Support additional samplerates up to 384kHz ASoC: bcm2835: Add support for TDM modes ASoC: add mclk-fs support to audio graph card ASoC: add mclk-fs to audio graph card binding ASoC: rt5514: work around link error ASoC: rt5514: mark PM functions as __maybe_unused ASoC: rt5663: Check the JD status in the button pushing ASoC: amd: Modified DMA transfer Mechanism for Playback ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2 ASoC: sun4i-codec: fixed 32bit audio capture support for H3/H2+ ASoC: da7213: add support for DSP modes ASoC: sun8i-codec: Add a comment on the LRCK inversion ASoC: sun8i-codec: Set the BCLK divider ASoC: rt5663: Delay and retry reading rt5663 ID register ASoC: amd: use do_div rather than 64 bit division to fix 32 bit builds ASoC: cs42l56: Fix reset GPIO name in example DT binding ASoC: rt5514-spi: check irq status to schedule data copy in resume function ...
2017-11-14Merge branch 'i2c/for-4.15' of ↵Linus Torvalds70-600/+1685
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "This contains two bigger than usual tree-wide changes this time. They all have proper acks, caused no merge conflicts in linux-next where they have been for a while. They are namely: - to-gpiod conversion of the i2c-gpio driver and its users (touching arch/* and drivers/mfd/*) - adding a sbs-manager based on I2C core updates to SMBus alerts (touching drivers/power/*) Other notable changes: - i2c_boardinfo can now carry a dev_name to be used when the device is created. This is because some devices in ACPI world need fixed names to find the regulators. - the designware driver got a long discussed overhaul of its PM handling. img-scb and davinci got PM support, too. - at24 driver has way better OF support. And it has a new maintainer. Thanks Bartosz for stepping up! The rest is regular driver updates and fixes" * 'i2c/for-4.15' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (55 commits) ARM: sa1100: simpad: Correct I2C GPIO offsets i2c: aspeed: Deassert reset in probe eeprom: at24: Add OF device ID table MAINTAINERS: new maintainer for AT24 driver i2c: nuc900: remove platform_data, too i2c: thunderx: Remove duplicate NULL check i2c: taos-evm: Remove duplicate NULL check i2c: Make i2c_unregister_device() NULL-aware i2c: xgene-slimpro: Support v2 i2c: mpc: remove useless variable initialization i2c: omap: Trigger bus recovery in lockup case i2c: gpio: Add support for named gpios in DT dt-bindings: i2c: i2c-gpio: Add support for named gpios i2c: gpio: Local vars in probe i2c: gpio: Augment all boardfiles to use open drain i2c: gpio: Enforce open drain through gpiolib gpio: Make it possible for consumers to enforce open drain i2c: gpio: Convert to use descriptors power: supply: sbs-message: fix some code style issues power: supply: sbs-battery: remove unchecked return var ...
2017-11-14Merge tag 'gpio-v4.15-1' of ↵Linus Torvalds88-516/+3158
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.15 kernel cycle: Core: - Fix the semantics of raw GPIO to actually be raw. No inversion semantics as before, but also no open draining, and allow the raw operations to affect lines used for interrupts as the caller supposedly knows what they are doing if they are getting the big hammer. - Rewrote the __inner_function() notation calls to names that make more sense. I just find this kind of code disturbing. - Drop the .irq_base() field from the gpiochip since now all IRQs are mapped dynamically. This is nice. - Support for .get_multiple() in the core driver API. This allows us to read several GPIO lines with a single register read. This has high value for some usecases: it can be used to create oscilloscopes and signal analyzers and other things that rely on reading several lines at exactly the same instant. Also a generally nice optimization. This uses the new assign_bit() macro from the bitops lib that was ACKed by Andrew Morton and is implemented for two drivers, one of them being the generic MMIO driver so everyone using that will be able to benefit from this. - Do not allow requests of Open Drain and Open Source setting of a GPIO line simultaneously. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. - A new interrupt chip core helper. This will be helpful to deal with "banked" GPIOs, which means GPIO controllers with several logical blocks of GPIO inside them. This is several gpiochips per device in the device model, in contrast to the case when there is a 1-to-1 relationship between a device and a gpiochip. New drivers: - Maxim MAX3191x industrial serializer, a very interesting piece of professional I/O hardware. - Uniphier GPIO driver. This is the GPIO block from the recent Socionext (ex Fujitsu and Panasonic) platform. - Tegra 186 driver. This is based on the new banked GPIO infrastructure. Other improvements: - Some documentation improvements. - Wakeup support for the DesignWare DWAPB GPIO controller. - Reset line support on the DesignWare DWAPB GPIO controller. - Several non-critical bug fixes and improvements for the Broadcom BRCMSTB driver. - Misc non-critical bug fixes like exotic errorpaths, removal of dead code etc. - Explicit comments on fall-through switch() statements" * tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits) gpio: tegra186: Remove tegra186_gpio_lock_class gpio: rcar: Add r8a77995 (R-Car D3) support pinctrl: bcm2835: Fix some merge fallout gpio: Fix undefined lock_dep_class gpio: Automatically add lockdep keys gpio: Introduce struct gpio_irq_chip.first gpio: Disambiguate struct gpio_irq_chip.nested gpio: Add Tegra186 support gpio: Export gpiochip_irq_{map,unmap}() gpio: Implement tighter IRQ chip integration gpio: Move lock_key into struct gpio_irq_chip gpio: Move irq_valid_mask into struct gpio_irq_chip gpio: Move irq_nested into struct gpio_irq_chip gpio: Move irq_chained_parent to struct gpio_irq_chip gpio: Move irq_default_type to struct gpio_irq_chip gpio: Move irq_handler to struct gpio_irq_chip gpio: Move irqdomain into struct gpio_irq_chip gpio: Move irqchip into struct gpio_irq_chip gpio: Introduce struct gpio_irq_chip pinctrl: armada-37xx: remove unused variable ...
2017-11-14Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds42-250/+71
Pull dma-mapping updates from Christoph Hellwig: - turn dma_cache_sync into a dma_map_ops instance and remove implementation that purely are dead because the architecture doesn't support noncoherent allocations - add a flag for busses that need DMA configuration (Robin Murphy) * tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: turn dma_cache_sync into a dma_map_ops method sh: make dma_cache_sync a no-op xtensa: make dma_cache_sync a no-op unicore32: make dma_cache_sync a no-op powerpc: make dma_cache_sync a no-op mn10300: make dma_cache_sync a no-op microblaze: make dma_cache_sync a no-op ia64: make dma_cache_sync a no-op frv: make dma_cache_sync a no-op x86: make dma_cache_sync a no-op floppy: consolidate the dummy fd_cacheflush definition drivers: flag buses which demand DMA configuration
2017-11-14Merge tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds35-320/+3865
Pull dmaengine updates from Vinod Koul: "Updates for this cycle include: - new driver for Spreadtrum dma controller, ST MDMA and DMAMUX controllers - PM support for IMG MDC drivers - updates to bcm-sba-raid driver and improvements to sun6i driver - subsystem conversion for: - timers to use timer_setup() - remove usage of PCI pool API - usage of %p format specifier - minor updates to bunch of drivers" * tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits) dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type dmaengine: dmatest: warn user when dma test times out dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue" dmaengine: stm32_mdma: activate pack/unpack feature dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad MAINTAINERS: Step down from a co-maintaner of DW DMAC driver dmaengine: pch_dma: Replace PCI pool old API dmaengine: Convert timers to use timer_setup() dmaengine: sprd: Add Spreadtrum DMA driver dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller dmaengine: sun6i: Retrieve channel count/max request from devicetree dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs dmaengine: bcm-sba-raid: Use common GPL comment header dmaengine: bcm-sba-raid: Use only single mailbox channel dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock dmaengine: pl330: fix descriptor allocation fail dmaengine: rcar-dmac: use TCRB instead of TCR for residue dmaengine: sun6i: Add support for Allwinner A64 and compatibles arm64: allwinner: a64: Add devicetree binding for DMA controller ...
2017-11-14dax: stop requiring a live device for dax_flush()Dan Williams1-3/+0
Now that dax_flush() is no longer a driver callback (commit c3ca015fab6d "dax: remove the pmem_dax_ops->flush abstraction"), stop requiring the dax_read_lock() to be held and the device to be alive. This is in preparation for switching filesystem-dax to store pfns instead of sectors in the radix. Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2017-11-14brd: remove dax supportDan Williams2-77/+0
DAX support in brd is awkward because its backing page frames are distinct from the ones provided by pmem, dcssblk, or axonram. We need pfn_t_devmap() entries to fully support DAX, and the limited DAX support for pfn_t_special() page frames is not interesting for brd when pmem is already a superset of brd. Lastly, brd is the only dax capable driver that may sleep in its ->direct_access() implementation. So it causes a global burden with no net gain of kernel functionality. For all these reasons, remove DAX support. Cc: Jens Axboe <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Ross Zwisler <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2017-11-14dax: quiet bdev_dax_supported()Dan Williams1-4/+4
Before we add another failure reason, quiet the existing log messages. Leave it to the caller to decide if bdev_dax_supported() failures are errors worth emitting to the log. Reported-by: Jeff Moyer <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2017-11-14Merge tag 'vfio-v4.15-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds7-4/+157
Pull VFIO updates from Alex Williamson: - Virtualize PCI MPS and MRRS registers - Avoid soft lockups on SPAPR when clearing TCE - Broadcom FlexRM platform device support - Samples driver cleanup & type1 integer overflow fix * tag 'vfio-v4.15-rc1' of git://github.com/awilliam/linux-vfio: vfio: platform: reset: Add Broadcom FlexRM reset module vfio/type1: silence integer overflow warning vfio-mdev/samples: make mdev_fops const and static vfio/spapr: Add cond_resched() for huge updates vfio/pci: Virtualize Maximum Read Request Size vfio/pci: Virtualize Maximum Payload Size
2017-11-14Merge tag 'iommu-v4.15-rc1' of git://github.com/awilliam/linux-vfioLinus Torvalds23-627/+983
Pull IOMMU updates from Alex Williamson: "As Joerg mentioned[1], he's out on paternity leave through the end of the year and I'm filling in for him in the interim: - Enforce MSI multiple IRQ alignment in AMD IOMMU - VT-d PASID error handling fixes - Add r8a7795 IPMMU support - Manage runtime PM links on exynos at {add,remove}_device callbacks - Fix Mediatek driver name to avoid conflict - Add terminate support to qcom fault handler - 64-bit IOVA optimizations - Simplfy IOVA domain destruction, better use of rcache, and skip anchor nodes on copy - Convert to IOMMU TLB sync API in io-pgtable-arm{-v7s} - Drop command queue lock when waiting for CMD_SYNC completion on ARM SMMU implementations supporting MSI to cacheable memory - iomu-vmsa cleanup inspired by missed IOTLB sync callbacks - Fix sleeping lock with preemption disabled for RT - Dual MMU support for TI DRA7xx DSPs - Optional flush option on IOVA allocation avoiding overhead when caller can try other options [1] https://lkml.org/lkml/2017/10/22/72" * tag 'iommu-v4.15-rc1' of git://github.com/awilliam/linux-vfio: (54 commits) iommu/iova: Use raw_cpu_ptr() instead of get_cpu_ptr() for ->fq iommu/mediatek: Fix driver name iommu/ipmmu-vmsa: Hook up r8a7795 DT matching code iommu/ipmmu-vmsa: Allow two bit SL0 iommu/ipmmu-vmsa: Make IMBUSCTR setup optional iommu/ipmmu-vmsa: Write IMCTR twice iommu/ipmmu-vmsa: IPMMU device is 40-bit bus master iommu/ipmmu-vmsa: Make use of IOMMU_OF_DECLARE() iommu/ipmmu-vmsa: Enable multi context support iommu/ipmmu-vmsa: Add optional root device feature iommu/ipmmu-vmsa: Introduce features, break out alias iommu/ipmmu-vmsa: Unify ipmmu_ops iommu/ipmmu-vmsa: Clean up struct ipmmu_vmsa_iommu_priv iommu/ipmmu-vmsa: Simplify group allocation iommu/ipmmu-vmsa: Unify domain alloc/free iommu/ipmmu-vmsa: Fix return value check in ipmmu_find_group_dma() iommu/vt-d: Clear pasid table entry when memory unbound iommu/vt-d: Clear Page Request Overflow fault bit iommu/vt-d: Missing checks for pasid tables if allocation fails iommu/amd: Limit the IOVA page range to the specified addresses ...
2017-11-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds131-2405/+8211
Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor updates. There's no major behaviour change or additions to the core in all of this, so the potential for regressions should be small (biggest potential being in the scsi error handler changes)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: lpfc: Fix hard lock up NMI in els timeout handling. scsi: mpt3sas: remove a stray KERN_INFO scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event() scsi: aacraid: use timespec64 instead of timeval scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair() scsi: mpt3sas: fix dma_addr_t casts scsi: be2iscsi: Use kasprintf scsi: storvsc: Avoid excessive host scan on controller change scsi: lpfc: fix kzalloc-simple.cocci warnings scsi: mpt3sas: Update mpt3sas driver version. scsi: mpt3sas: Fix sparse warnings scsi: mpt3sas: Fix nvme drives checking for tlr. scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives. scsi: mpt3sas: scan and add nvme device after controller reset scsi: mpt3sas: Set NVMe device queue depth as 128 scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware. scsi: mpt3sas: API's to remove nvme drive from sml scsi: mpt3sas: API 's to support NVMe drive addition to SML ...
2017-11-14Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds24-223/+409
Pull MD update from Shaohua Li: "This update mostly includes bug fixes: - md-cluster now supports raid10 from Guoqing - raid5 PPL fixes from Artur - badblock regression fix from Bo - suspend hang related fixes from Neil - raid5 reshape fixes from Neil - raid1 freeze deadlock fix from Nate - memleak fixes from Zdenek - bitmap related fixes from Me and Tao - other fixes and cleanups" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (33 commits) md: free unused memory after bitmap resize md: release allocated bitset sync_set md/bitmap: clear BITMAP_WRITE_ERROR bit before writing it to sb md: be cautious about using ->curr_resync_completed for ->recovery_offset badblocks: fix wrong return value in badblocks_set if badblocks are disabled md: don't check MD_SB_CHANGE_CLEAN in md_allow_write md-cluster: update document for raid10 md: remove redundant variable q raid1: remove obsolete code in raid1_write_request md-cluster: Use a small window for raid10 resync md-cluster: Suspend writes in RAID10 if within range md-cluster/raid10: set "do_balance = 0" if area is resyncing md: use lockdep_assert_held raid1: prevent freeze_array/wait_all_barriers deadlock md: use TASK_IDLE instead of blocking signals md: remove special meaning of ->quiesce(.., 2) md: allow metadata update while suspending. md: use mddev_suspend/resume instead of ->quiesce() md: move suspend_hi/lo handling into core md code md: don't call bitmap_create() while array is quiesced. ...
2017-11-14Merge tag 'for-4.15/dm' of ↵Linus Torvalds14-262/+408
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - a few conversions from atomic_t to ref_count_t - a DM core fix for a race during device destruction that could result in a BUG_ON - a stable@ fix for a DM cache race condition that could lead to data corruption when operating in writeback mode (writethrough is default) - various DM cache cleanups and improvements - add DAX support to the DM log-writes target - a fix for the DM zoned target's ability to deal with the last zone of the drive being smaller than all others - a stable@ DM crypt and DM integrity fix for a negative check that was to restrictive (prevented slab debug with XFS ontop of DM crypt from working) - a DM raid target fix for a panic that can occur when forcing a raid to sync * tag 'for-4.15/dm' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (25 commits) dm cache: lift common migration preparation code to alloc_migration() dm cache: remove usused deferred_cells member from struct cache dm cache policy smq: allocate cache blocks in order dm cache policy smq: change max background work from 10240 to 4096 blocks dm cache background tracker: limit amount of background work that may be issued at once dm cache policy smq: take origin idle status into account when queuing writebacks dm cache policy smq: handle races with queuing background_work dm raid: fix panic when attempting to force a raid to sync dm integrity: allow unaligned bv_offset dm crypt: allow unaligned bv_offset dm: small cleanup in dm_get_md() dm: fix race between dm_get_from_kobject() and __dm_destroy() dm: allocate struct mapped_device with kvzalloc dm zoned: ignore last smaller runt zone dm space map metadata: use ARRAY_SIZE dm log writes: add support for DAX dm log writes: add support for inline data buffers dm cache: simplify get_per_bio_data() by removing data_size argument dm cache: remove all obsolete writethrough-specific code dm cache: submit writethrough writes in parallel to origin and cache ...
Powered by cgit, Gruvboxed by Blaster4385.