aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-02-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds19-121/+284
Pull kvm fixes from Paolo Bonzini: "Bugfixes, including the fix for CVE-2020-2732 and a few issues found by 'make W=1'" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: rstify new ioctls in api.rst KVM: nVMX: Check IO instruction VM-exit conditions KVM: nVMX: Refactor IO bitmap checks into helper function KVM: nVMX: Don't emulate instructions in guest mode KVM: nVMX: Emulate MTF when performing instruction emulation KVM: fix error handling in svm_hardware_setup KVM: SVM: Fix potential memory leak in svm_cpu_init() KVM: apic: avoid calculating pending eoi from an uninitialized val KVM: nVMX: clear PIN_BASED_POSTED_INTR from nested pinbased_ctls only when apicv is globally disabled KVM: nVMX: handle nested posted interrupts when apicv is disabled for L1 kvm: x86: svm: Fix NULL pointer dereference when AVIC not enabled KVM: VMX: Add VMX_FEATURE_USR_WAIT_PAUSE KVM: nVMX: Hold KVM's srcu lock when syncing vmcs12->shadow KVM: x86: don't notify userspace IOAPIC on edge-triggered interrupt EOI kvm/emulate: fix a -Werror=cast-function-type KVM: x86: fix incorrect comparison in trace event KVM: nVMX: Fix some obsolete comments and grammar error KVM: x86: fix missing prototypes KVM: x86: enable -Werror
2020-02-24Merge branch 'linus' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a Kconfig-related build error and an integer overflow in chacha20poly1305" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: chacha20poly1305 - prevent integer overflow on large input tee: amdtee: amdtee depends on CRYPTO_DEV_CCP_DD
2020-02-24Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-2/+0
Pull tmpfs fix from Al Viro: "Regression from fs_parse series this cycle..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: tmpfs: deny and force are not huge mount options
2020-02-24floppy: check FDC index for errors before assigning itLinus Torvalds1-2/+5
Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in wait_til_ready(). Which on the face of it can't happen, since as Willy Tarreau points out, the function does no particular memory access. Except through the FDCS macro, which just indexes a static allocation through teh current fdc, which is always checked against N_FDC. Except the checking happens after we've already assigned the value. The floppy driver is a disgrace (a lot of it going back to my original horrd "design"), and has no real maintainer. Nobody has the hardware, and nobody really cares. But it still gets used in virtual environment because it's one of those things that everybody supports. The whole thing should be re-written, or at least parts of it should be seriously cleaned up. The 'current fdc' index, which is used by the FDCS macro, and which is often shadowed by a local 'fdc' variable, is a prime example of how not to write code. But because nobody has the hardware or the motivation, let's just fix up the immediate problem with a nasty band-aid: test the fdc index before actually assigning it to the static 'fdc' variable. Reported-by: Jordy Zomer <[email protected]> Cc: Willy Tarreau <[email protected]> Cc: Dan Carpenter <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-02-24net: bridge: fix stale eth hdr pointer in br_dev_xmitNikolay Aleksandrov1-4/+2
In br_dev_xmit() we perform vlan filtering in br_allowed_ingress() but if the packet has the vlan header inside (e.g. bridge with disabled tx-vlan-offload) then the vlan filtering code will use skb_vlan_untag() to extract the vid before filtering which in turn calls pskb_may_pull() and we may end up with a stale eth pointer. Moreover the cached eth header pointer will generally be wrong after that operation. Remove the eth header caching and just use eth_hdr() directly, the compiler does the right thing and calculates it only once so we don't lose anything. Fixes: 057658cb33fb ("bridge: suppress arp pkts on BR_NEIGH_SUPPRESS ports") Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-24Merge branch 'net-ll_temac-Bugfixes'David S. Miller2-38/+175
Esben Haabendal says: ==================== net: ll_temac: Bugfixes Fix a number of bugs which have been present since the first commit. The bugs fixed in patch 1,2 and 4 have all been observed in real systems, and was relatively easy to reproduce given an appropriate stress setup. Changes since v1: - Changed error handling of of dma_map_single() in temac_start_xmit() to drop packet instead of returning NETDEV_TX_BUSY. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-02-24net: ll_temac: Handle DMA halt condition caused by buffer underrunEsben Haabendal2-5/+56
The SDMA engine used by TEMAC halts operation when it has finished processing of the last buffer descriptor in the buffer ring. Unfortunately, no interrupt event is generated when this happens, so we need to setup another mechanism to make sure DMA operation is restarted when enough buffers have been added to the ring. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-24net: ll_temac: Fix RX buffer descriptor handling on GFP_ATOMIC pressureEsben Haabendal2-31/+82
Failures caused by GFP_ATOMIC memory pressure have been observed, and due to the missing error handling, results in kernel crash such as [1876998.350133] kernel BUG at mm/slub.c:3952! [1876998.350141] invalid opcode: 0000 [#1] PREEMPT SMP PTI [1876998.350147] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.3.0-scnxt #1 [1876998.350150] Hardware name: N/A N/A/COMe-bIP2, BIOS CCR2R920 03/01/2017 [1876998.350160] RIP: 0010:kfree+0x1ca/0x220 [1876998.350164] Code: 85 db 74 49 48 8b 95 68 01 00 00 48 31 c2 48 89 10 e9 d7 fe ff ff 49 8b 04 24 a9 00 00 01 00 75 0b 49 8b 44 24 08 a8 01 75 02 <0f> 0b 49 8b 04 24 31 f6 a9 00 00 01 00 74 06 41 0f b6 74 24 5b [1876998.350172] RSP: 0018:ffffc900000f0df0 EFLAGS: 00010246 [1876998.350177] RAX: ffffea00027f0708 RBX: ffff888008d78000 RCX: 0000000000391372 [1876998.350181] RDX: 0000000000000000 RSI: ffffe8ffffd01400 RDI: ffff888008d78000 [1876998.350185] RBP: ffff8881185a5d00 R08: ffffc90000087dd8 R09: 000000000000280a [1876998.350189] R10: 0000000000000002 R11: 0000000000000000 R12: ffffea0000235e00 [1876998.350193] R13: ffff8881185438a0 R14: 0000000000000000 R15: ffff888118543870 [1876998.350198] FS: 0000000000000000(0000) GS:ffff88811f300000(0000) knlGS:0000000000000000 [1876998.350203] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 s#1 Part1 [1876998.350206] CR2: 00007f8dac7b09f0 CR3: 000000011e20a006 CR4: 00000000001606e0 [1876998.350210] Call Trace: [1876998.350215] <IRQ> [1876998.350224] ? __netif_receive_skb_core+0x70a/0x920 [1876998.350229] kfree_skb+0x32/0xb0 [1876998.350234] __netif_receive_skb_core+0x70a/0x920 [1876998.350240] __netif_receive_skb_one_core+0x36/0x80 [1876998.350245] process_backlog+0x8b/0x150 [1876998.350250] net_rx_action+0xf7/0x340 [1876998.350255] __do_softirq+0x10f/0x353 [1876998.350262] irq_exit+0xb2/0xc0 [1876998.350265] do_IRQ+0x77/0xd0 [1876998.350271] common_interrupt+0xf/0xf [1876998.350274] </IRQ> In order to handle such failures more graceful, this change splits the receive loop into one for consuming the received buffers, and one for allocating new buffers. When GFP_ATOMIC allocations fail, the receive will continue with the buffers that is still there, and with the expectation that the allocations will succeed in a later call to receive. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-24net: ll_temac: Add more error handling of dma_map_single() callsEsben Haabendal1-2/+24
This adds error handling to the remaining dma_map_single() calls, so that behavior is well defined if/when we run out of DMA memory. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-24net: ll_temac: Fix race condition causing TX hangEsben Haabendal1-3/+16
It is possible that the interrupt handler fires and frees up space in the TX ring in between checking for sufficient TX ring space and stopping the TX queue in temac_start_xmit. If this happens, the queue wake from the interrupt handler will occur before the queue is stopped, causing a lost wakeup and the adapter's transmit hanging. To avoid this, after stopping the queue, check again whether there is sufficient space in the TX ring. If so, wake up the queue again. This is a port of the similar fix in axienet driver, commit 7de44285c1f6 ("net: axienet: Fix race condition causing TX hang"). Fixes: 23ecc4bde21f ("net: ll_temac: fix checksum offload logic") Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-24KVM: s390: rstify new ioctls in api.rstChristian Borntraeger1-15/+18
We also need to rstify the new ioctls that we added in parallel to the rstification of the kvm docs. Signed-off-by: Christian Borntraeger <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Reviewed-by: Cornelia Huck <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-24docs: dt: fix several broken doc referencesMauro Carvalho Chehab7-8/+8
There are several DT doc references that require manual fixes. I found 3 cases fixed on this patch: - directory named "binding/" instead of "bindings/"; - .txt to .yaml renames; - file renames (still on txt format); Signed-off-by: Mauro Carvalho Chehab <[email protected]> Reviewed-by: Miquel Raynal <[email protected]> Reviewed-by: Jérôme Pouiller <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-02-24docs: dt: fix several broken references due to renamesMauro Carvalho Chehab20-23/+23
Several DT references got broken due to txt->yaml conversion. Those are auto-fixed by running: scripts/documentation-file-ref-check --fix Signed-off-by: Mauro Carvalho Chehab <[email protected]> Acked-by: Andrew Jeffery <[email protected]> Reviewed-by: Dan Murphy <[email protected]> Reviewed-by: Amit Kucheria <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-02-24Merge tag 'imx-fixes-5.6' of ↵Olof Johansson14-36/+68
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.6: - Build v7_cpu_resume() unconditionally to fix system hang in case that suspend is disabled but cpuidle support is enabled. - Drop unexisting Ethernet PHY device from imx8qxp-mek board. - Fix SRAM compatible strings on imx6dl-colibri-eval-v3 board. - Fix imx-scu driver to make sure that all messages words are written sequentially. - A series from Leonard Crestez to fix i.MX SC API users, having all messages aligned on 4 bytes. - Fix eMMC supply for phycore-som board. - Drop bogus frequency setting from imx7-colibri SD/MMC device, so that HS200 mode starts working and delivers better performance. - Fix opp-supported-hw for i.MX7D to get consumer and industrial parts work with correct frequency settings. - Restore MDIO compatible to the correct one for LS1021A SoC. * tag 'imx-fixes-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx-scu: Align imx sc msg structs to 4 firmware: imx: Align imx_sc_msg_req_cpu_start to 4 firmware: imx: scu-pd: Align imx sc msg structs to 4 firmware: imx: misc: Align imx sc msg structs to 4 firmware: imx: scu: Ensure sequential TX ARM: dts: imx7-colibri: Fix frequency for sd/mmc arm64: dts: imx8qxp-mek: Remove unexisting Ethernet PHY ARM: dts: imx6dl-colibri-eval-v3: fix sram compatible properties ARM: dts: ls1021a: Restore MDIO compatible to gianfar ARM: dts: imx7d: fix opp-supported-hw ARM: imx: build v7_cpu_resume() unconditionally ARM: dts: imx6: phycore-som: fix emmc supply Link: https://lore.kernel.org/r/20200224120334.GH27688@dragon Signed-off-by: Olof Johansson <[email protected]>
2020-02-24Merge tag 'omap-for-v5.6/droid4-lcd-fix-signed' of ↵Olof Johansson5-2/+280
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fix LCD backlight issue for droid4 There was a bit of an integration glitch with the LED backlight series. The LED related parts got merged into v5.6-rc1, but the actual backlight driver got left out. This caused an issue on at least droid4 where the LCD backlight can not yet be enabled automatically. And the LCD backlight can no longer be enabled manually either via sysfs. The integration glitch happened because some pending comments from me. There was some confusion on which device tree property we should use for the default brightness property. After discussing how to fix this on the mailing lists, we came to the conclusion that it's best to fix this issue properly by adding the missing driver. The other solutions would mean backpedaling and try to come up with some temporary solution that really does not solve the issue for users. The patch for led_bl.c has been around for quite a while and tested by many users and was assumed to be merged as part of the LED backlight series. For the brightness property to use, we ended up using the more common "default-brightness-level" rather than "default-brightness" used by some backlight drivers. * tag 'omap-for-v5.6/droid4-lcd-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: droid4: Configure LED backlight for lm3532 backlight: add led-backlight driver Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-02-24Merge tag 'reset-fixes-for-v5.6' of git://git.pengutronix.de/git/pza/linux ↵Olof Johansson3-3/+8
into arm/fixes Reset controller fixes for v5.6 Fix the intel,rcu-gw binding schema for the intel,global-reset property, fix whitespace in the MAINTAINERS keyword entry, and add missing CONFIG_HAS_IOMEM dependency to CONFIG_RESET_INTEL_GW and CONFIG_RESET_BRCMSTB_RESCAL. * tag 'reset-fixes-for-v5.6' of git://git.pengutronix.de/git/pza/linux: reset: intel: add unspecified HAS_IOMEM dependency reset: brcmstb-rescal: add unspecified HAS_IOMEM dependency MAINTAINERS: fix style in RESET CONTROLLER FRAMEWORK dt-bindings: reset: intel,rcu-gw: Fix intel,global-reset schema Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-02-24scsi: zfcp: fix wrong data and display format of SFP+ temperatureBenjamin Block2-2/+2
When implementing support for retrieval of local diagnostic data from the FCP channel, the wrong data format was assumed for the temperature of the local SFP+ connector. The Fibre Channel Link Services (FC-LS-3) specification is not clear on the format of the stored integer, and only after consulting the SNIA specification SFF-8472 did we realize it is stored as two's complement. Thus, the used data and display format is wrong, and highly misleading for users when the temperature should drop below 0°C (however unlikely that may be). To fix this, change the data format in `struct fsf_qtcb_bottom_port` from unsigned to signed, and change the printf format string used to generate `zfcp_sysfs_adapter_diag_sfp_temperature_show()` from `%hu` to `%hd`. Link: https://lore.kernel.org/r/d6e3be5428da5c9490cfff4df7cae868bc9f1a7e.1582039501.git.bblock@linux.ibm.com Fixes: a10a61e807b0 ("scsi: zfcp: support retrieval of SFP Data via Exchange Port Data") Fixes: 6028f7c4cd87 ("scsi: zfcp: introduce sysfs interface for diagnostics of local SFP transceiver") Cc: <[email protected]> # 5.5+ Reviewed-by: Jens Remus <[email protected]> Reviewed-by: Fedor Loshakov <[email protected]> Reviewed-by: Steffen Maier <[email protected]> Signed-off-by: Benjamin Block <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-02-24scsi: sd_sbc: Fix sd_zbc_report_zones()Damien Le Moal1-1/+6
The block layer generic blk_revalidate_disk_zones() checks the validity of zone descriptors reported by a disk using the blk_revalidate_zone_cb() callback function executed for each zone descriptor. If a ZBC disk reports invalid zone descriptors, blk_revalidate_disk_zones() returns an error and sd_zbc_read_zones() changes the disk capacity to 0, which in turn results in the gendisk structure capacity to be set to 0. This all works well for the first revalidate pass on a disk and the block layer detects the capactiy change. On the second revalidate pass, blk_revalidate_disk_zones() is called again and sd_zbc_report_zones() executed to check the zones a second time. However, for this second pass, the gendisk capacity is now 0, which results in sd_zbc_report_zones() to do nothing and to report success and no zones. blk_revalidate_disk_zones() in turn returns success and sets the disk queue chunk_sectors limit with zero as no zones were checked, causing a oops to trigger on the BUG_ON(!is_power_of_2(chunk_sectors)) in blk_queue_chunk_sectors(). Fix this by using the sdkp capacity field rather than the gendisk capacity for the report zones loop in sd_zbc_report_zones(). Also add a check to return immediately an error if the sdkp capacity is 0. With this fix, invalid/buggy ZBC disk scan does not trigger a oops and are exposed with a 0 capacity. This change also preserve the chance for the disk to be correctly revalidated on the second revalidate pass as the scsi disk structure capacity field is always set to the disk reported value when sd_zbc_report_zones() is called. Link: https://lore.kernel.org/r/[email protected] Fixes: d41003513e61 ("block: rework zone reporting") Cc: Cc: <[email protected]> # v5.5 Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-02-24dmaengine: imx-sdma: fix context cacheMartin Fuzzey1-0/+1
There is a DMA problem with the serial ports on i.MX6. When the following sequence is performed: 1) Open a port 2) Write some data 3) Close the port 4) Open a *different* port 5) Write some data 6) Close the port The second write sends nothing and the second close hangs. If the first close() is omitted it works. Adding logs to the the UART driver shows that the DMA is being setup but the callback is never invoked for the second write. This used to work in 4.19. Git bisect leads to: ad0d92d: "dmaengine: imx-sdma: refine to load context only once" This commit adds a "context_loaded" flag used to avoid unnecessary context setups. However the flag is only reset in sdma_channel_terminate_work(), which is only invoked in a worker triggered by sdma_terminate_all() IF there is an active descriptor. So, if no active descriptor remains when the channel is terminated, the flag is not reset and, when the channel is later reused the old context is used. Fix the problem by always resetting the flag in sdma_free_chan_resources(). Cc: [email protected] Signed-off-by: Martin Fuzzey <[email protected]> Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once") Reviewed-by: Fabio Estevam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-02-24MAINTAINERS: clean up PCIE DRIVER FOR CAVIUM THUNDERXLukas Bulwahn1-1/+0
Commit e1ac611f57c9 ("dt-bindings: PCI: Convert generic host binding to DT schema") combines all information from pci-thunder-{pem,ecam}.txt into host-generic-pci.yaml, and deleted the two files in Documentation/devicetree/bindings/pci/. Since then, ./scripts/get_maintainer.pl --self-test complains: no file matches F: Documentation/devicetree/bindings/pci/pci-thunder-* As the PCIE DRIVER FOR CAVIUM THUNDERX-relevant information is only a small part of the host-generic-pci.yaml, do not add this file to the PCIE DRIVER FOR CAVIUM THUNDERX entry, and only drop the reference to the removed files. Signed-off-by: Lukas Bulwahn <[email protected]> Acked-by: Robert Richter <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-02-24dmaengine: idxd: wq size configuration needs to check global max sizeDave Jiang1-1/+15
The current size_store() function for idxd sysfs does not check the total wq size. This allows configuration of all wqs with total wq size. Add check to make sure the wq sysfs attribute rejects storing of size over the total wq size. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Jerry Chen <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/158213309629.2509.3583411832507185041.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2020-02-24dmaengine: idxd: sysfs input of wq incorrect wq type should return errorDave Jiang1-2/+4
Currently when inputing an unrecognized wq type, we set the wq type to "none". It really should return error and not change the existing wq type that's in the kernel. Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver") Reported-by: Yixin Zhang <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/158213304803.2290.13336343633425868211.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2020-02-24dmaengine: coh901318: Fix a double lock bug in dma_tc_handle()Dan Carpenter1-4/+0
The caller is already holding the lock so this will deadlock. Fixes: 0b58828c923e ("DMAENGINE: COH 901 318 remove irq counting") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-02-24io_uring: fix personality idr leakJens Axboe1-0/+1
We somehow never free the idr, even though we init it for every ctx. Free it when the rest of the ring data is freed. Fixes: 071698e13ac6 ("io_uring: allow registering credentials") Reviewed-by: Stefano Garzarella <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-02-24drm/virtio: fix resource id creation raceJohn Bates1-2/+2
The previous code was not thread safe and caused undefined behavior from spurious duplicate resource IDs. In this patch, an atomic_t is used instead. We no longer see any duplicate IDs in tests with this change. Fixes: 16065fcdd19d ("drm/virtio: do NOT reuse resource ids") Signed-off-by: John Bates <[email protected]> Reviewed-by: Chia-I Wu <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2020-02-24media: hantro: Fix broken media controller linksEzequiel Garcia1-2/+2
The driver currently creates a broken topology, with a source-to-source link and a sink-to-sink link instead of two source-to-sink links. Reported-by: Nicolas Dufresne <[email protected]> Cc: <[email protected]> # for v5.3 and up Signed-off-by: Ezequiel Garcia <[email protected]> Tested-by: Nicolas Dufresne <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-02-24media: mc-entity.c: use & to check pad flags, not ==Hans Verkuil1-2/+2
These are bits so to test if a pad is a sink you use & but not ==. It looks like the only reason this hasn't caused problems before is that media_get_pad_index() is currently only used with pads that do not set the MEDIA_PAD_FL_MUST_CONNECT flag. So a pad really had only the SINK or SOURCE flag set and nothing else. Signed-off-by: Hans Verkuil <[email protected]> Cc: <[email protected]> # for v5.3 and up Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-02-24media: v4l2-mem2mem.c: fix broken linksHans Verkuil1-2/+2
The topology that v4l2_m2m_register_media_controller() creates for a processing block actually created a source-to-source link and a sink-to-sink link instead of two source-to-sink links. Unfortunately v4l2-compliance never checked for such bad links, so this went unreported for quite some time. Signed-off-by: Hans Verkuil <[email protected]> Reported-by: Nicolas Dufresne <[email protected]> Cc: <[email protected]> # for v4.19 and up Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-02-24media: vicodec: process all 4 components for RGB32 formatsHans Verkuil1-25/+9
Only ARGB32-type pixelformat were assumed to have 4 components, which is wrong since RGB32-type pixelformats may have an alpha channel, so they should also assume 4 color components. The XRGB32-type pixelformats really have only 3 color components, but this complicated matters since that creates strides that are sometimes width * 3 and sometimes width * 4, and in fact this can result in buffer overflows. Keep things simple by just always processing all 4 color components. In the future we might want to optimize this again for the XRGB32-type pixelformats, but for now keep it simple and robust. Signed-off-by: Hans Verkuil <[email protected]> Cc: <[email protected]> # for v5.4 and up Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-02-24media: pulse8-cec: close serio in disconnect, not adap_freeHans Verkuil1-3/+5
The serio_close() call was moved to pulse8_cec_adap_free(), but that can be too late if that is called after the serio core pulled down the serio already, in which case you get a kernel oops. Keep it in the disconnect(). Signed-off-by: Hans Verkuil <[email protected]> Fixes: 601282d65b96 ("media: pulse8-cec: use adap_free callback") Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-02-24media: pulse8-cec: INIT_DELAYED_WORK was called too lateHans Verkuil1-2/+2
If earlier in the connect() an error occurred, then pulse8_cec_adap_free was called by cec_delete_adapter, and that free function tried to cancel the ping_eeprom_work workqueue, but that workqueue hasn't been initialized yet, resulting in a kernel warning. Move the initialization of that workqueue up to where the other workqueues are initialized. Signed-off-by: Hans Verkuil <[email protected]> Fixes: 601282d65b96 ("media: pulse8-cec: use adap_free callback") Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-02-24ARM: dts: r8a7779: Remove deprecated "renesas, rcar-sata" compatible valueGeert Uytterhoeven1-1/+1
The "renesas,rcar-sata" compatible value was deprecated by "renesas,sata-r8a7779" many years ago, in commit e67adb4e669db834 ("sata_rcar: Add R-Car Gen2 SATA PHY support"). Drop it. Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-02-24powerpc: Include .BTF sectionNaveen N. Rao1-0/+6
Selecting CONFIG_DEBUG_INFO_BTF results in the below warning from ld: ld: warning: orphan section `.BTF' from `.btf.vmlinux.bin.o' being placed in section `.BTF' Include .BTF section in vmlinux explicitly to fix the same. Signed-off-by: Naveen N. Rao <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-02-24drm/i915/gvt: Separate display reset from ALL_ENGINES resetTina Zhang1-1/+1
ALL_ENGINES reset doesn't clobber display with the current gvt-g supported platforms. Thus ALL_ENGINES reset shouldn't reset the display engine registers emulated by gvt-g. This fixes guest warning like [ 14.622026] [drm] Initialized i915 1.6.0 20200114 for 0000:00:03.0 on minor 0 [ 14.967917] fbcon: i915drmfb (fb0) is primary device [ 25.100188] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] E RROR [CRTC:51:pipe A] flip_done timed out [ 25.100860] -----------[ cut here ]----------- [ 25.100861] pll on state mismatch (expected 0, found 1) [ 25.101024] WARNING: CPU: 1 PID: 30 at drivers/gpu/drm/i915/display/intel_dis play.c:14382 verify_single_dpll_state.isra.115+0x28f/0x320 [i915] [ 25.101025] Modules linked in: intel_rapl_msr intel_rapl_common kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel i915 aesni_intel cr ypto_simd cryptd glue_helper cec rc_core video drm_kms_helper joydev drm input_l eds i2c_algo_bit serio_raw fb_sys_fops syscopyarea sysfillrect sysimgblt mac_hid qemu_fw_cfg sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 e1000 psmouse i2c_piix4 pata_acpi floppy [ 25.101052] CPU: 1 PID: 30 Comm: kworker/u4:1 Not tainted 5.5.0+ #1 [ 25.101053] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1 .12.1-0-ga5cab58 04/01/2014 [ 25.101055] Workqueue: events_unbound async_run_entry_fn [ 25.101092] RIP: 0010:verify_single_dpll_state.isra.115+0x28f/0x320 [i915] [ 25.101093] Code: e0 d9 ff e9 a3 fe ff ff 80 3d e9 c2 11 00 00 44 89 f6 48 c7 c7 c0 9d 88 c0 75 3b e8 eb df d9 ff e9 c7 fe ff ff e8 d1 e0 ae c4 <0f> 0b e9 7a fe ff ff 80 3d c0 c2 11 00 00 8d 71 41 89 c2 48 c7 c7 [ 25.101093] RSP: 0018:ffffb1de80107878 EFLAGS: 00010286 [ 25.101094] RAX: 0000000000000000 RBX: ffffb1de80107884 RCX: 0000000000000007 [ 25.101095] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff94fdfdd19740 [ 25.101095] RBP: ffffb1de80107938 R08: 0000000d6bfdc7b4 R09: 000000000000002b [ 25.101096] R10: ffff94fdf82dc000 R11: 0000000000000225 R12: 00000000000001f8 [ 25.101096] R13: ffff94fdb3ca6a90 R14: ffff94fdb3ca0000 R15: 0000000000000000 [ 25.101097] FS: 0000000000000000(0000) GS:ffff94fdfdd00000(0000) knlGS:00000 00000000000 [ 25.101098] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.101098] CR2: 00007fbc3e2be9c8 CR3: 000000003339a003 CR4: 0000000000360ee0 [ 25.101101] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 25.101101] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 25.101102] Call Trace: [ 25.101139] intel_atomic_commit_tail+0xde4/0x1520 [i915] [ 25.101141] ? flush_workqueue_prep_pwqs+0xfa/0x130 [ 25.101142] ? flush_workqueue+0x198/0x3c0 [ 25.101174] intel_atomic_commit+0x2ad/0x320 [i915] [ 25.101209] drm_atomic_commit+0x4a/0x50 [drm] [ 25.101220] drm_client_modeset_commit_atomic+0x1c4/0x200 [drm] [ 25.101231] drm_client_modeset_commit_force+0x47/0x170 [drm] [ 25.101250] drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_hel per] [ 25.101255] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper] [ 25.101287] intel_fbdev_set_par+0x1a/0x40 [i915] [ 25.101289] ? con_is_visible+0x2e/0x60 [ 25.101290] fbcon_init+0x378/0x600 [ 25.101292] visual_init+0xd5/0x130 [ 25.101296] do_bind_con_driver+0x217/0x430 [ 25.101297] do_take_over_console+0x7d/0x1b0 [ 25.101298] do_fbcon_takeover+0x5c/0xb0 [ 25.101299] fbcon_fb_registered+0x199/0x1a0 [ 25.101301] register_framebuffer+0x22c/0x330 [ 25.101306] __drm_fb_helper_initial_config_and_unlock+0x31a/0x520 [drm_kms_h elper] [ 25.101311] drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper] [ 25.101341] intel_fbdev_initial_config+0x18/0x30 [i915] [ 25.101342] async_run_entry_fn+0x3c/0x150 [ 25.101343] process_one_work+0x1fd/0x3f0 [ 25.101344] worker_thread+0x34/0x410 [ 25.101346] kthread+0x121/0x140 [ 25.101346] ? process_one_work+0x3f0/0x3f0 [ 25.101347] ? kthread_park+0x90/0x90 [ 25.101350] ret_from_fork+0x35/0x40 [ 25.101351] --[ end trace b5b47d44cd998ba1 ]-- Fixes: 6294b61ba769 ("drm/i915/gvt: add missing display part reset for vGPU reset") Signed-off-by: Tina Zhang <[email protected]> Reviewed-by: Zhenyu Wang <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-24mac80211: rx: avoid RCU list traversal under mutexMadhuparna Bhowmik1-1/+1
local->sta_mtx is held in __ieee80211_check_fast_rx_iface(). No need to use list_for_each_entry_rcu() as it also requires a cond argument to avoid false lockdep warnings when not used in RCU read-side section (with CONFIG_PROVE_RCU_LIST). Therefore use list_for_each_entry(); Signed-off-by: Madhuparna Bhowmik <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-02-24nl80211: explicitly include if_vlan.hJohannes Berg1-0/+1
We use that here, and do seem to get it through some recursive include, but better include it explicitly. Signed-off-by: Johannes Berg <[email protected]> Link: https://lore.kernel.org/r/20200224093814.1b9c258fec67.I45ac150d4e11c72eb263abec9f1f0c7add9bef2b@changeid Signed-off-by: Johannes Berg <[email protected]>
2020-02-24soc: imx-scu: Align imx sc msg structs to 4Leonard Crestez1-1/+1
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: 73feb4d0f8f1 ("soc: imx-scu: Add SoC UID(unique identifier) support") Signed-off-by: Leonard Crestez <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-02-24firmware: imx: Align imx_sc_msg_req_cpu_start to 4Leonard Crestez1-1/+1
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: d90bf296ae18 ("firmware: imx: Add support to start/stop a CPU") Signed-off-by: Leonard Crestez <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-02-24firmware: imx: scu-pd: Align imx sc msg structs to 4Leonard Crestez1-1/+1
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y. Fix by marking with __aligned(4). Fixes: c800cd7824bd ("firmware: imx: add SCU power domain driver") Signed-off-by: Leonard Crestez <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-02-24firmware: imx: misc: Align imx sc msg structs to 4Leonard Crestez1-3/+3
The imx SC api strongly assumes that messages are composed out of 4-bytes words but some of our message structs have odd sizeofs. This produces many oopses with CONFIG_KASAN=y: BUG: KASAN: stack-out-of-bounds in imx_mu_send_data+0x108/0x1f0 It shouldn't cause an issues in normal use because these structs are always allocated on the stack. Fixes: 15e1f2bc8b3b ("firmware: imx: add misc svc support") Signed-off-by: Leonard Crestez <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-02-24firmware: imx: scu: Ensure sequential TXLeonard Crestez1-0/+27
SCU requires that all messages words are written sequentially but linux MU driver implements multiple independent channels for each register so ordering between different channels must be ensured by SCU API interface. Wait for tx_done before every send to ensure that no queueing happens at the mailbox channel level. Fixes: edbee095fafb ("firmware: imx: add SCU firmware driver support") Signed-off-by: Leonard Crestez <[email protected]> Cc: <[email protected]> Reviewed-by: Peng Fan <[email protected]> Reviewed-by:: Oleksij Rempel <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-02-23net: core: devlink.c: Hold devlink->lock from the beginning of ↵Madhuparna Bhowmik1-7/+14
devlink_dpipe_table_register() devlink_dpipe_table_find() should be called under either rcu_read_lock() or devlink->lock. devlink_dpipe_table_register() calls devlink_dpipe_table_find() without holding the lock and acquires it later. Therefore hold the devlink->lock from the beginning of devlink_dpipe_table_register(). Suggested-by: Jiri Pirko <[email protected]> Signed-off-by: Madhuparna Bhowmik <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-23net: phy: Avoid multiple suspendsFlorian Fainelli1-2/+3
It is currently possible for a PHY device to be suspended as part of a network device driver's suspend call while it is still being attached to that net_device, either via phy_suspend() or implicitly via phy_stop(). Later on, when the MDIO bus controller get suspended, we would attempt to suspend again the PHY because it is still attached to a network device. This is both a waste of time and creates an opportunity for improper clock/power management bugs to creep in. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-23net: ks8851-ml: Fix IRQ handling and lockingMarek Vasut1-6/+8
The KS8851 requires that packet RX and TX are mutually exclusive. Currently, the driver hopes to achieve this by disabling interrupt from the card by writing the card registers and by disabling the interrupt on the interrupt controller. This however is racy on SMP. Replace this approach by expanding the spinlock used around the ks_start_xmit() TX path to ks_irq() RX path to assure true mutual exclusion and remove the interrupt enabling/disabling, which is now not needed anymore. Furthermore, disable interrupts also in ks_net_stop(), which was missing before. Note that a massive improvement here would be to re-use the KS8851 driver approach, which is to move the TX path into a worker thread, interrupt handling to threaded interrupt, and synchronize everything with mutexes, but that would be a much bigger rework, for a separate patch. Signed-off-by: Marek Vasut <[email protected]> Cc: David S. Miller <[email protected]> Cc: Lukas Wunner <[email protected]> Cc: Petr Stetiar <[email protected]> Cc: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-23docs: networking: phy: Rephrase paragraph for clarityJonathan Neuschäfer1-2/+3
Let's make it a little easier to read. Signed-off-by: Jonathan Neuschäfer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-23docs: adm1177: fix a broken referenceMauro Carvalho Chehab1-2/+1
This reference was missing the .rst extension. This would be OK if it were using the :doc: directive. So, switch to it. As a side effect, this will create cross-reference links at html output. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Link: https://lore.kernel.org/r/8d37f465888656224855a21f5bb01edb1ca66cf3.1582361738.git.mchehab+huawei@kernel.org Signed-off-by: Guenter Roeck <[email protected]>
2020-02-24ARM: dts: imx7-colibri: Fix frequency for sd/mmcOleksandr Suvorov1-1/+0
SD/MMC on Colibri iMX7S/D modules successfully support 200Mhz frequency in HS200 mode. Removing the unnecessary max-frequency limit significantly increases the performance: == before fix ==== root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0 /dev/mmcblk0: Timing buffered disk reads: 252 MB in 3.02 seconds = 83.54 MB/sec ================== === after fix ==== root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0 /dev/mmcblk0: Timing buffered disk reads: 408 MB in 3.00 seconds = 135.94 MB/sec ================== Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support") Signed-off-by: Oleksandr Suvorov <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-02-23io_uring: handle multiple personalities in link chainsJens Axboe1-10/+15
If we have a chain of requests and they don't all use the same credentials, then the head of the chain will be issued with the credentails of the tail of the chain. Ensure __io_queue_sqe() overrides the credentials, if they are different. Once we do that, we can clean up the creds handling as well, by only having io_submit_sqe() do the lookup of a personality. It doesn't need to assign it, since __io_queue_sqe() now always does the right thing. Fixes: 75c6a03904e0 ("io_uring: support using a registered personality for commands") Reported-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-02-24Revert "PM / devfreq: Modify the device name as devfreq(X) for sysfs"Orson Zhai1-3/+1
This reverts commit 4585fbcb5331fc910b7e553ad3efd0dd7b320d14. The name changing as devfreq(X) breaks some user space applications, such as Android HAL from Unisoc and Hikey [1]. The device name will be changed unexpectly after every boot depending on module init sequence. It will make trouble to setup some system configuration like selinux for Android. So we'd like to revert it back to old naming rule before any better way being found. [1] https://lkml.org/lkml/2018/5/8/1042 Cc: John Stultz <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Signed-off-by: Orson Zhai <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Chanwoo Choi <[email protected]>
2020-02-23tcp: fix TFO SYNACK undo to avoid double-timestamp-undoNeal Cardwell1-1/+5
In a rare corner case the new logic for undo of SYNACK RTO could result in triggering the warning in tcp_fastretrans_alert() that says: WARN_ON(tp->retrans_out != 0); The warning looked like: WARNING: CPU: 1 PID: 1 at net/ipv4/tcp_input.c:2818 tcp_ack+0x13e0/0x3270 The sequence that tickles this bug is: - Fast Open server receives TFO SYN with data, sends SYNACK - (client receives SYNACK and sends ACK, but ACK is lost) - server app sends some data packets - (N of the first data packets are lost) - server receives client ACK that has a TS ECR matching first SYNACK, and also SACKs suggesting the first N data packets were lost - server performs TS undo of SYNACK RTO, then immediately enters recovery - buggy behavior then performed a *second* undo that caused the connection to be in CA_Open with retrans_out != 0 Basically, the incoming ACK packet with SACK blocks causes us to first undo the cwnd reduction from the SYNACK RTO, but then immediately enters fast recovery, which then makes us eligible for undo again. And then tcp_rcv_synrecv_state_fastopen() accidentally performs an undo using a "mash-up" of state from two different loss recovery phases: it uses the timestamp info from the ACK of the original SYNACK, and the undo_marker from the fast recovery. This fix refines the logic to only invoke the tcp_try_undo_loss() inside tcp_rcv_synrecv_state_fastopen() if the connection is still in CA_Loss. If peer SACKs triggered fast recovery, then tcp_rcv_synrecv_state_fastopen() can't safely undo. Fixes: 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit") Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.