aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-05blktrace: fix dereference after null checkCengiz Can1-1/+4
There was a recent change in blktrace.c that added a RCU protection to `q->blk_trace` in order to fix a use-after-free issue during access. However the change missed an edge case that can lead to dereferencing of `bt` pointer even when it's NULL: Coverity static analyzer marked this as a FORWARD_NULL issue with CID 1460458. ``` /kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store() 1898 ret = 0; 1899 if (bt == NULL) 1900 ret = blk_trace_setup_queue(q, bdev); 1901 1902 if (ret == 0) { 1903 if (attr == &dev_attr_act_mask) >>> CID 1460458: Null pointer dereferences (FORWARD_NULL) >>> Dereferencing null pointer "bt". 1904 bt->act_mask = value; 1905 else if (attr == &dev_attr_pid) 1906 bt->pid = value; 1907 else if (attr == &dev_attr_start_lba) 1908 bt->start_lba = value; 1909 else if (attr == &dev_attr_end_lba) ``` Added a reassignment with RCU annotation to fix the issue. Fixes: c780e86dd48 ("blktrace: Protect q->blk_trace with RCU") Cc: [email protected] Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Bob Liu <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Cengiz Can <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-03-05MAINTAINERS: Add missed files related to Synopsys DesignWare UARTAndy Shevchenko1-0/+2
8250_dw has been split to library part and the driver, the library is being used by 8250_lpss, which represents Synosys DesignWare UART (with optional Synopsys Designware DMA) enumerated by PCI. Add missed above mentioned files to the database record for review. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-05serial: 8250_exar: add support for ACCES cardsJay Dolan1-0/+33
Add ACCES VIDs and PIDs that use the Exar chips Signed-off-by: Jay Dolan <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-05riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS fileYash Shah1-0/+5
Add the ability to reboot the HiFive Unleashed board via GPIO. Signed-off-by: Yash Shah <[email protected]> Reviewed-by: Anup Patel <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05tty:serial:mvebu-uart:fix a wrong returntangbin1-1/+1
in this place, the function should return a negative value and the PTR_ERR already returns a negative,so return -PTR_ERR() is wrong. Signed-off-by: tangbin <[email protected]> Cc: stable <[email protected]> Acked-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-05net: hns3: fix a not link up issue when fibre port supports autonegJian Shen1-1/+3
When fibre port supports auto-negotiation, the IMP(Intelligent Management Process) processes the speed of auto-negotiation and the user's speed separately. For below case, the port will get a not link up problem. step 1: disables auto-negotiation and sets speed to A, then the driver's MAC speed will be updated to A. step 2: enables auto-negotiation and MAC gets negotiated speed B, then the driver's MAC speed will be updated to B through querying in periodical task. step 3: MAC gets new negotiated speed A. step 4: disables auto-negotiation and sets speed to B before periodical task query new MAC speed A, the driver will ignore the speed configuration. This patch fixes it by skipping speed and duplex checking when fibre port supports auto-negotiation. Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port") Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Huazhong Tan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-05slip: make slhc_compress() more robust against malicious packetsEric Dumazet1-4/+10
Before accessing various fields in IPV4 network header and TCP header, make sure the packet : - Has IP version 4 (ip->version == 4) - Has not a silly network length (ip->ihl >= 5) - Is big enough to hold network and transport headers - Has not a silly TCP header size (th->doff >= sizeof(struct tcphdr) / 4) syzbot reported : BUG: KMSAN: uninit-value in slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270 CPU: 0 PID: 11728 Comm: syz-executor231 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270 ppp_send_frame drivers/net/ppp/ppp_generic.c:1637 [inline] __ppp_xmit_process+0x1902/0x2970 drivers/net/ppp/ppp_generic.c:1495 ppp_xmit_process+0x147/0x2f0 drivers/net/ppp/ppp_generic.c:1516 ppp_write+0x6bb/0x790 drivers/net/ppp/ppp_generic.c:512 do_loop_readv_writev fs/read_write.c:717 [inline] do_iter_write+0x812/0xdc0 fs/read_write.c:1000 compat_writev+0x2df/0x5a0 fs/read_write.c:1351 do_compat_pwritev64 fs/read_write.c:1400 [inline] __do_compat_sys_pwritev fs/read_write.c:1420 [inline] __se_compat_sys_pwritev fs/read_write.c:1414 [inline] __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f7cd99 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000ffdb84ac EFLAGS: 00000217 ORIG_RAX: 000000000000014e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000200001c0 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000040047459 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] ppp_write+0x115/0x790 drivers/net/ppp/ppp_generic.c:500 do_loop_readv_writev fs/read_write.c:717 [inline] do_iter_write+0x812/0xdc0 fs/read_write.c:1000 compat_writev+0x2df/0x5a0 fs/read_write.c:1351 do_compat_pwritev64 fs/read_write.c:1400 [inline] __do_compat_sys_pwritev fs/read_write.c:1420 [inline] __se_compat_sys_pwritev fs/read_write.c:1414 [inline] __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 Fixes: b5451d783ade ("slip: Move the SLIP drivers") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-05RISC-V: Select Goldfish RTC driver for QEMU virt machineAnup Patel3-0/+4
We select Goldfish RTC driver using QEMU virt machine kconfig option to access RTC device on QEMU virt machine. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05RISC-V: Select SYSCON Reboot and Poweroff for QEMU virt machineAnup Patel3-0/+4
The SYSCON Reboot and Poweroff drivers can be used on QEMU virt machine to reboot or poweroff the system hence we select these drivers using QEMU virt machine kconfig option. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05RISC-V: Enable QEMU virt machine support in defconfigsAnup Patel2-29/+2
We have kconfig option for QEMU virt machine so let's enable it in RV32 and RV64 defconfigs. Also, we remove various VIRTIO configs from RV32 and RV64 defconfigs because these are now selected by QEMU virt machine kconfig option. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05RISC-V: Add kconfig option for QEMU virt machineAnup Patel1-0/+20
We add kconfig option for QEMU virt machine and select all required VIRTIO drivers using this kconfig option. Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-05Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds2-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V update from Wei Liu: - Update MAINTAINERS file for Hyper-V - One cleanup patch for Hyper-V HID driver * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: HID: hyperv: NULL check before some freeing functions is not needed. Hyper-V: add myself as a maintainer Hyper-V: Drop Sasha Levin from the Hyper-V maintainers
2020-03-05Merge tag 'dmaengine-fix-5.6-rc5' of ↵Linus Torvalds7-153/+400
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes: - Doc updates to clean warnings for dmaengine - Fixes for newly added Intel idxd driver - More fixes for newly added TI k3-udma driver - Fixes for IMX and Tegra drivers" * tag 'dmaengine-fix-5.6-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: imx-sdma: Fix the event id check to include RX event for UART6 dmaengine: tegra-apb: Prevent race conditions of tasklet vs free list dmaengine: tegra-apb: Fix use-after-free dmaengine: imx-sdma: fix context cache dmaengine: idxd: wq size configuration needs to check global max size dmaengine: idxd: sysfs input of wq incorrect wq type should return error dmaengine: coh901318: Fix a double lock bug in dma_tc_handle() dmaengine: idxd: correct reserved token calculation dmaengine: ti: k3-udma: Fix terminated transfer handling dmaengine: ti: k3-udma: Use the channel direction in pause/resume functions dmaengine: ti: k3-udma: Use the TR counter helper for slave_sg and cyclic dmaengine: ti: k3-udma: Move the TR counter calculation to helper function dmaengine: ti: k3-udma: Workaround for RX teardown with stale data in peer dmaengine: ti: k3-udma: Use ktime/usleep_range based TX completion check dmaengine: idxd: Fix error handling in idxd_wq_cdev_dev_setup() dmaengine: doc: fix warnings/issues of client.rst dmaengine: idxd: fix runaway module ref count on device driver bind
2020-03-05xen/blkfront: fix ring info addressingJuergen Gross1-38/+42
Commit 0265d6e8ddb890 ("xen/blkfront: limit allocated memory size to actual use case") made struct blkfront_ring_info size dynamic. This is fine when running with only one queue, but with multiple queues the addressing of the single queues has to be adapted as the structs are allocated in an array. Fixes: 0265d6e8ddb890 ("xen/blkfront: limit allocated memory size to actual use case") Reported-by: Sander Eikelenboom <[email protected]> Tested-by: Sander Eikelenboom <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Acked-by: Roger Pau Monné <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xen/xenbus: fix lockingJuergen Gross3-8/+10
Commit 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") introduced a bug by holding a lock while calling a function which might schedule. Fix that by using a semaphore instead. Fixes: 060eabe8fbe726 ("xenbus/backend: Protect xenbus callback with lock") Signed-off-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xenbus: req->err should be updated before req->stateDongli Zhang1-0/+2
This patch adds the barrier to guarantee that req->err is always updated before req->state. Otherwise, read_reply() would not return ERR_PTR(req->err) but req->body, when process_writes()->xb_write() is failed. Signed-off-by: Dongli Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Julien Grall <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xenbus: req->body should be updated before req->stateDongli Zhang2-3/+8
The req->body should be updated before req->state is updated and the order should be guaranteed by a barrier. Otherwise, read_reply() might return req->body = NULL. Below is sample callstack when the issue is reproduced on purpose by reordering the updates of req->body and req->state and adding delay in code between updates of req->state and req->body. [ 22.356105] general protection fault: 0000 [#1] SMP PTI [ 22.361185] CPU: 2 PID: 52 Comm: xenwatch Not tainted 5.5.0xen+ #6 [ 22.366727] Hardware name: Xen HVM domU, BIOS ... [ 22.372245] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 ... ... [ 22.392163] RSP: 0018:ffffb2d64023fdf0 EFLAGS: 00010246 [ 22.395933] RAX: 0000000000000000 RBX: 75746e7562755f6d RCX: 0000000000000000 [ 22.400871] RDX: 0000000000000000 RSI: ffffb2d64023fdfc RDI: 75746e7562755f6d [ 22.405874] RBP: 0000000000000000 R08: 00000000000001e8 R09: 0000000000cdcdcd [ 22.410945] R10: ffffb2d6402ffe00 R11: ffff9d95395eaeb0 R12: ffff9d9535935000 [ 22.417613] R13: ffff9d9526d4a000 R14: ffff9d9526f4f340 R15: ffff9d9537654000 [ 22.423726] FS: 0000000000000000(0000) GS:ffff9d953bc80000(0000) knlGS:0000000000000000 [ 22.429898] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.434342] CR2: 000000c4206a9000 CR3: 00000001ea3fc002 CR4: 00000000001606e0 [ 22.439645] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 22.444941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 22.450342] Call Trace: [ 22.452509] simple_strtoull+0x27/0x70 [ 22.455572] xenbus_transaction_start+0x31/0x50 [ 22.459104] netback_changed+0x76c/0xcc1 [xen_netfront] [ 22.463279] ? find_watch+0x40/0x40 [ 22.466156] xenwatch_thread+0xb4/0x150 [ 22.469309] ? wait_woken+0x80/0x80 [ 22.472198] kthread+0x10e/0x130 [ 22.474925] ? kthread_park+0x80/0x80 [ 22.477946] ret_from_fork+0x35/0x40 [ 22.480968] Modules linked in: xen_kbdfront xen_fbfront(+) xen_netfront xen_blkfront [ 22.486783] ---[ end trace a9222030a747c3f7 ]--- [ 22.490424] RIP: 0010:_parse_integer_fixup_radix+0x6/0x60 The virt_rmb() is added in the 'true' path of test_reply(). The "while" is changed to "do while" so that test_reply() is used as a read memory barrier. Signed-off-by: Dongli Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Julien Grall <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05xen: Replace zero-length array with flexible-array memberGustavo A. R. Silva2-2/+2
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/20200226212612.GA4663@embeddedor Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-03-05ALSA: hda/realtek - Enable the headset of ASUS B9450FA with ALC294Jian-Hong Pan1-0/+13
A headset on the laptop like ASUS B9450FA does not work, until quirk ALC294_FIXUP_ASUS_HPE is applied. Signed-off-by: Jian-Hong Pan <[email protected]> Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-03-05drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume ↵Hersen Wu1-0/+69
from s3 (v2) This interface is for dGPU Navi1x. Linux dc-pplib interface depends on window driver dc implementation. For Navi1x, clock settings of dcn watermarks are fixed. the settings should be passed to smu during boot up and resume from s3. boot up: dc calculate dcn watermark clock settings within dc_create, dcn20_resource_construct, then call pplib functions below to pass the settings to smu: smu_set_watermarks_for_clock_ranges smu_set_watermarks_table navi10_set_watermarks_table smu_write_watermarks_table For Renoir, clock settings of dcn watermark are also fixed values. dc has implemented different flow for window driver: dc_hardware_init / dc_set_power_state dcn10_init_hw notify_wm_ranges set_wm_ranges For Linux smu_set_watermarks_for_clock_ranges renoir_set_watermarks_table smu_write_watermarks_table dc_hardware_init -> amdgpu_dm_init dc_set_power_state --> dm_resume therefore, linux dc-pplib interface of navi10/12/14 is different from that of Renoir. v2: add missing unlock in error case Signed-off-by: Hersen Wu <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-05drm/amd/powerplay: map mclk to fclk for COMBINATIONAL_BYPASS casePrike Liang1-3/+3
When hit COMBINATIONAL_BYPASS the mclk will be bypass and can export fclk frequency to user usage. Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-03-05drm/amd/powerplay: fix pre-check condition for setting clock rangePrike Liang2-4/+1
This fix will handle some MP1 FW issue like as mclk dpm table in renoir has a reverse dpm clock layout and a zero frequency dpm level as following case. cat pp_dpm_mclk 0: 1200Mhz 1: 1200Mhz 2: 800Mhz 3: 0Mhz Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-03-05drm/amd/display: fix dcc swath size calculations on dcn1Josip Pavic1-2/+2
[Why] Swath sizes are being calculated incorrectly. The horizontal swath size should be the product of block height, viewport width, and bytes per element, but the calculation uses viewport height instead of width. The vertical swath size is similarly incorrectly calculated. The effect of this is that we report the wrong DCC caps. [How] Use viewport width in the horizontal swath size calculation and viewport height in the vertical swath size calculation. Signed-off-by: Josip Pavic <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-05drm/amd/display: Clear link settings on MST disable connectorBhawanpreet Lakha1-0/+1
[Why] If we have a single MST display and we disconnect it, we dont disable that link. This causes the old link settings to still exist Now on a replug for MST we think its a link loss and will try to reallocate mst payload which will fail, throwing warning below. [ 129.374192] [drm] Failed to updateMST allocation table forpipe idx:0 [ 129.374206] ------------[ cut here ]------------ [ 129.374284] WARNING: CPU: 14 PID: 1710 at drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc_link.c:3153 dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374285] Modules linked in: amdgpu(OE) amd_iommu_v2 gpu_sched ttm drm_kms_helper drm fb_sys_fops syscopyarea sysfillrect sysimgblt binfmt_misc nls_iso8859_1 edac_mce_amd snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio kvm snd_hda_codec_hdmi snd_hda_intel snd_intel_nhlt snd_hda_codec irqbypass snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi crct10dif_pclmul snd_seq crc32_pclmul ghash_clmulni_intel snd_seq_device snd_timer snd aesni_intel eeepc_wmi crypto_simd asus_wmi joydev cryptd sparse_keymap input_leds soundcore video glue_helper wmi_bmof mxm_wmi k10temp ccp mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_generic usbhid hid igb i2c_algo_bit ahci dca i2c_piix4 libahci gpio_amdpt wmi gpio_generic [ 129.374318] CPU: 14 PID: 1710 Comm: kworker/14:2 Tainted: G W OE 5.4.0-rc7bhawan+ #480 [ 129.374318] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 0515 03/30/2017 [ 129.374397] Workqueue: events dm_irq_work_func [amdgpu] [ 129.374468] RIP: 0010:dc_link_allocate_mst_payload+0x1f7/0x220 [amdgpu] [ 129.374470] Code: 52 20 e8 1c 63 ad f4 48 8b 5d d0 65 48 33 1c 25 28 00 00 00 b8 01 00 00 00 75 16 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 <0f> 0b e9 fa fe ff ff e8 ed 5b d6 f3 41 0f b6 b6 c4 02 00 00 48 c7 [ 129.374471] RSP: 0018:ffff9f9141e7fcc0 EFLAGS: 00010246 [ 129.374472] RAX: 0000000000000000 RBX: ffff91ef0762f800 RCX: 0000000000000000 [ 129.374473] RDX: 0000000000000005 RSI: ffffffffc0c4a988 RDI: 0000000000000004 [ 129.374474] RBP: ffff9f9141e7fd10 R08: 0000000000000005 R09: 0000000000000000 [ 129.374475] R10: 0000000000000002 R11: 0000000000000001 R12: ffff91eebd510c00 [ 129.374475] R13: ffff91eebd510e58 R14: ffff91ef052c01b8 R15: 0000000000000006 [ 129.374476] FS: 0000000000000000(0000) GS:ffff91ef0ef80000(0000) knlGS:0000000000000000 [ 129.374477] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 129.374478] CR2: 000055623ea01d50 CR3: 0000000408a8c000 CR4: 00000000003406e0 [ 129.374479] Call Trace: [ 129.374550] dc_link_reallocate_mst_payload+0x12e/0x150 [amdgpu] [ 129.374617] dc_link_handle_hpd_rx_irq+0x6d4/0x6e0 [amdgpu] [ 129.374693] handle_hpd_rx_irq+0x77/0x310 [amdgpu] [ 129.374768] dm_irq_work_func+0x53/0x70 [amdgpu] [ 129.374774] process_one_work+0x1fd/0x3f0 [ 129.374776] worker_thread+0x255/0x410 [ 129.374778] kthread+0x121/0x140 [ 129.374780] ? process_one_work+0x3f0/0x3f0 [ 129.374781] ? kthread_park+0x90/0x90 [ 129.374785] ret_from_fork+0x22/0x40 [How] when we disable MST we should clear the cur link settings (lane_count=0 is good enough). This will cause us to not reallocate payloads earlier than expected and not throw the warning Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Hersen Wu <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-05drm/amdgpu: disable 3D pipe 1 on Navi1xTianci.Yin1-46/+51
[why] CP firmware decide to skip setting the state for 3D pipe 1 for Navi1x as there is no use case. [how] Disable 3D pipe 1 on Navi1x. Reviewed-by: Feifei Xu <[email protected]> Reviewed-by: Monk Liu <[email protected]> Signed-off-by: Tianci.Yin <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-03-05ALSA: hda/realtek - Fix silent output on Gigabyte X570 Aorus MasterChristian Lachner1-0/+1
The Gigabyte X570 Aorus Master motherboard with ALC1220 codec requires a similar workaround for Clevo laptops to enforce the DAC/mixer connection path. Set up a quirk entry for that. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205275 Signed-off-by: Christian Lachner <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-03-05ALSA: hda/realtek - Add Headset Button supported for ThinkPad X1Kailang Yang1-4/+9
ThinkPad want to support Headset Button control. This patch will enable it. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-03-05ALSA: hda/realtek - Add Headset Mic supportedKailang Yang1-0/+2
Dell desktop platform supported headset Mic. Add pin verb to enable headset Mic. This platform only support fixed type headset for Iphone type. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-03-05HID: hyperv: NULL check before some freeing functions is not needed.Lucas Tanure1-4/+2
Fix below warnings reported by coccicheck: drivers/hid/hid-hyperv.c:197:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/hid/hid-hyperv.c:211:2-7: WARNING: NULL check before some freeing functions is not needed. Signed-off-by: Lucas Tanure <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Reviewed-by: Wei Liu <[email protected]> Acked-by: Benjamin Tissoires <[email protected]> Signed-off-by: Wei Liu <[email protected]>
2020-03-05Hyper-V: add myself as a maintainerWei Liu1-0/+1
Signed-off-by: Wei Liu <[email protected]> Acked-by: K. Y. Srinivasan <[email protected]>
2020-03-05Hyper-V: Drop Sasha Levin from the Hyper-V maintainersSasha Levin1-1/+0
Signed-off-by: Sasha Levin <[email protected]> Signed-off-by: Wei Liu <[email protected]>
2020-03-05MAINTAINERS: update ALLWINNER CPUFREQ DRIVER entryLukas Bulwahn1-1/+1
Commit b30d8cf5e171 ("dt-bindings: opp: Convert Allwinner H6 OPP to a schema") converted in Documentation/devicetree/bindings/opp/ the file sun50i-nvmem-cpufreq.txt to allwinner,sun50i-h6-operating-points.yaml. Since then, ./scripts/get_maintainer.pl --self-test complains: warning: no file matches \ F: Documentation/devicetree/bindings/opp/sun50i-nvmem-cpufreq.txt Adjust the file pattern in the ALLWINNER CPUFREQ DRIVER entry. Signed-off-by: Lukas Bulwahn <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-03-05ASoC: wm8741: Fix typo in Kconfig promptAxel Lin1-1/+1
Fix trivial copy-n-paste mistake. Signed-off-by: Axel Lin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-03-05netfilter: nf_tables: fix infinite loop when expr is not availableFlorian Westphal1-7/+3
nft will loop forever if the kernel doesn't support an expression: 1. nft_expr_type_get() appends the family specific name to the module list. 2. -EAGAIN is returned to nfnetlink, nfnetlink calls abort path. 3. abort path sets ->done to true and calls request_module for the expression. 4. nfnetlink replays the batch, we end up in nft_expr_type_get() again. 5. nft_expr_type_get attempts to append family-specific name. This one already exists on the list, so we continue 6. nft_expr_type_get adds the generic expression name to the module list. -EAGAIN is returned, nfnetlink calls abort path. 7. abort path encounters the family-specific expression which has 'done' set, so it gets removed. 8. abort path requests the generic expression name, sets done to true. 9. batch is replayed. If the expression could not be loaded, then we will end up back at 1), because the family-specific name got removed and the cycle starts again. Note that userspace can SIGKILL the nft process to stop the cycle, but the desired behaviour is to return an error after the generic expr name fails to load the expression. Fixes: eb014de4fd418 ("netfilter: nf_tables: autoload modules from the abort path") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-05netfilter: nf_tables: dump NFTA_CHAIN_FLAGS attributePablo Neira Ayuso1-0/+5
Missing NFTA_CHAIN_FLAGS netlink attribute when dumping basechain definitions. Fixes: c9626a2cbdb2 ("netfilter: nf_tables: add hardware offload support") Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-03-05crypto: x86/curve25519 - support assemblers with no adx supportJason A. Donenfeld3-5/+13
Some older version of GAS do not support the ADX instructions, similarly to how they also don't support AVX and such. This commit adds the same build-time detection mechanisms we use for AVX and others for ADX, and then makes sure that the curve25519 library dispatcher calls the right functions. Reported-by: Willy Tarreau <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-03-05powerpc/mm: Fix missing KUAP disable in flush_coherent_icache()Michael Ellerman1-0/+2
Stefan reported a strange kernel fault which turned out to be due to a missing KUAP disable in flush_coherent_icache() called from flush_icache_range(). The fault looks like: Kernel attempted to access user page (7fffc30d9c00) - exploit attempt? (uid: 1009) BUG: Unable to handle kernel data access on read at 0x7fffc30d9c00 Faulting instruction address: 0xc00000000007232c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV CPU: 35 PID: 5886 Comm: sigtramp Not tainted 5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40 #79 NIP: c00000000007232c LR: c00000000003b7fc CTR: 0000000000000000 REGS: c000001e11093940 TRAP: 0300 Not tainted (5.6.0-rc2-gcc-8.2.0-00003-gfc37a1632d40) MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000884 XER: 00000000 CFAR: c0000000000722fc DAR: 00007fffc30d9c00 DSISR: 08000000 IRQMASK: 0 GPR00: c00000000003b7fc c000001e11093bd0 c0000000023ac200 00007fffc30d9c00 GPR04: 00007fffc30d9c18 0000000000000000 c000001e11093bd4 0000000000000000 GPR08: 0000000000000000 0000000000000001 0000000000000000 c000001e1104ed80 GPR12: 0000000000000000 c000001fff6ab380 c0000000016be2d0 4000000000000000 GPR16: c000000000000000 bfffffffffffffff 0000000000000000 0000000000000000 GPR20: 00007fffc30d9c00 00007fffc30d8f58 00007fffc30d9c18 00007fffc30d9c20 GPR24: 00007fffc30d9c18 0000000000000000 c000001e11093d90 c000001e1104ed80 GPR28: c000001e11093e90 0000000000000000 c0000000023d9d18 00007fffc30d9c00 NIP flush_icache_range+0x5c/0x80 LR handle_rt_signal64+0x95c/0xc2c Call Trace: 0xc000001e11093d90 (unreliable) handle_rt_signal64+0x93c/0xc2c do_notify_resume+0x310/0x430 ret_from_except_lite+0x70/0x74 Instruction dump: 409e002c 7c0802a6 3c62ff31 3863f6a0 f8010080 48195fed 60000000 48fe4c8d 60000000 e8010080 7c0803a6 7c0004ac <7c00ffac> 7c0004ac 4c00012c 38210070 This path through handle_rt_signal64() to setup_trampoline() and flush_icache_range() is only triggered by 64-bit processes that have unmapped their VDSO, which is rare. flush_icache_range() takes a range of addresses to flush. In flush_coherent_icache() we implement an optimisation for CPUs where we know we don't actually have to flush the whole range, we just need to do a single icbi. However we still execute the icbi on the user address of the start of the range we're flushing. On CPUs that also implement KUAP (Power9) that leads to the spurious fault above. We should be able to pass any address, including a kernel address, to the icbi on these CPUs, which would avoid any interaction with KUAP. But I don't want to make that change in a bug fix, just in case it surfaces some strange behaviour on some CPU. So for now just disable KUAP around the icbi. Note the icbi is treated as a load, so we allow read access, not write as you'd expect. Fixes: 890274c2dc4c ("powerpc/64s: Implement KUAP for Radix MMU") Cc: [email protected] # v5.2+ Reported-by: Stefan Berger <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-03-05drm/amdgpu: clean wptr on wb when gpu recoveryYintian Tao2-0/+2
The TDR will be randomly failed due to compute ring test failure. If the compute ring wptr & 0x7ff(ring_buf_mask) is 0x100 then after map mqd the compute ring rptr will be synced with 0x100. And the ring test packet size is also 0x100. Then after invocation of amdgpu_ring_commit, the cp will not really handle the packet on the ring buffer because rptr is equal to wptr. Signed-off-by: Yintian Tao <[email protected]> Acked-by: Christian König <[email protected]> Reviewed-by: Monk Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-05Merge tag 'mediatek-drm-fixes-5.6' of ↵Dave Airlie3-10/+28
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes Mediatek DRM Fixes for Linux 5.6 Signed-off-by: Dave Airlie <[email protected]> From: CK Hu <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1583373069.364.4.camel@mtksdaap41
2020-03-05Merge tag 'exynos-drm-fixes-for-v5.6-rc5' of ↵Dave Airlie2-15/+19
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Three fixups - fix a kernel oops problem in case that driver is loaded as module. - fix a regulator warning issue when I2C DDC adapter cannot be gathered. - print out an error message only in error case excepting -EPROBE_DEFER. Signed-off-by: Dave Airlie <[email protected]> From: Inki Dae <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-04riscv: Fix range looking for kernel image memblockAlexandre Ghiti1-1/+1
When looking for the memblock where the kernel lives, we should check that the memory range associated to the memblock entirely comprises the kernel image and not only intersects with it. Signed-off-by: Alexandre Ghiti <[email protected]> Reviewed-by: Anup Patel <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-04Revert "software node: Simplify software_node_release() function"Brendan Higgins1-7/+7
This reverts commit 3df85a1ae51f6b256982fe9d17c2dc5bfb4cc402. The reverted commit says "It's possible to release the node ID immediately when fwnode_remove_software_node() is called, no need to wait for software_node_release() with that." However, releasing the node ID before waiting for software_node_release() to be called causes the node ID to be released before the kobject and the underlying sysfs entry; this means there is a period of time where a sysfs entry exists that is associated with an unallocated node ID. Once consequence of this is that there is a race condition where it is possible to call fwnode_create_software_node() with no parent node specified (NULL) and have it fail with -EEXIST because the node ID that was assigned is still associated with a stale sysfs entry that hasn't been cleaned up yet. Although it is difficult to reproduce this race condition under normal conditions, it can be deterministically reproduced with the following minconfig on UML: CONFIG_KUNIT_DRIVER_PE_TEST=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_TIMERS=y CONFIG_DEBUG_KOBJECT_RELEASE=y CONFIG_KUNIT=y Running the tests with this configuration causes the following failure: <snip> kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 400) ok 1 - pe_test_uints sysfs: cannot create duplicate filename '/kernel/software_nodes/node0' CPU: 0 PID: 28 Comm: kunit_try_catch Not tainted 5.6.0-rc3-next-20200227 #14 <snip> kobject_add_internal failed for node0 with -EEXIST, don't try to register things with the same name in the same directory. kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 100) # pe_test_uint_arrays: ASSERTION FAILED at drivers/base/test/property-entry-test.c:123 Expected node is not error, but is: -17 not ok 2 - pe_test_uint_arrays <snip> Reported-by: Heidi Fahim <[email protected]> Signed-off-by: Brendan Higgins <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Cc: 5.3+ <[email protected]> # 5.3+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-03-04dt-bindings: bus: Drop empty compatible string in exampleRob Herring1-1/+0
In preparation to add generic checks of compatible strings, drop the compatible as '...' is not a valid compatible string. Cc: Maxime Ripard <[email protected]> Cc: Chen-Yu Tsai <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2020-03-04Merge tag 'for-5.6/dm-fixes' of ↵Linus Torvalds10-69/+94
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix request-based DM's congestion_fn and actually wire it up to the bdi. - Extend dm-bio-record to track additional struct bio members needed by DM integrity target. - Fix DM core to properly advertise that a device is suspended during unload (between the presuspend and postsuspend hooks). This change is a prereq for related DM integrity and DM writecache fixes. It elevates DM integrity's 'suspending' state tracking to DM core. - Four stable fixes for DM integrity target. - Fix crash in DM cache target due to incorrect work item cancelling. - Fix DM thin metadata lockdep warning that was introduced during 5.6 merge window. - Fix DM zoned target's chunk work refcounting that regressed during recent conversion to refcount_t. - Bump the minor version for DM core and all target versions that have seen interface changes or important fixes during the 5.6 cycle. * tag 'for-5.6/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: bump version of core and various targets dm: fix congested_fn for request-based device dm integrity: use dm_bio_record and dm_bio_restore dm bio record: save/restore bi_end_io and bi_integrity dm zoned: Fix reference counter initial value of chunk works dm writecache: verify watermark during resume dm: report suspended device during destroy dm thin metadata: fix lockdep complaint dm cache: fix a crash due to incorrect work item cancelling dm integrity: fix invalid table returned due to argument count mismatch dm integrity: fix a deadlock due to offloading to an incorrect workqueue dm integrity: fix recalculation when moving from journal mode to bitmap mode
2020-03-04riscv: Force flat memory model with no-mmuDamien Le Moal1-0/+1
Compilation errors trigger if ARCH_SPARSEMEM_ENABLE is enabled for a nommu kernel. Since the sparsemem model does not make sense anyway for the nommu case, do not allow selecting this option to always use the flatmem model. Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Anup Patel <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-03-04RDMA/iwcm: Fix iwcm work deallocationBernard Metzler1-1/+3
The dealloc_work_entries() function must update the work_free_list pointer while freeing its entries, since potentially called again on same list. A second iteration of the work list caused system crash. This happens, if work allocation fails during cma_iw_listen() and free_cm_id() tries to free the list again during cleanup. Fixes: 922a8e9fb2e0 ("RDMA: iWARP Connection Manager.") Link: https://lore.kernel.org/r/[email protected] Reported-by: [email protected] Signed-off-by: Bernard Metzler <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/siw: Fix failure handling during device creationBernard Metzler1-3/+3
A failing call to ib_device_set_netdev() during device creation caused system crash due to xa_destroy of uninitialized xarray hit by device deallocation. Fixed by moving xarray initialization before potential device deallocation. Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Link: https://lore.kernel.org/r/[email protected] Reported-by: [email protected] Signed-off-by: Bernard Metzler <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/nldev: Fix crash when set a QP to a new counter but QPN is missingMark Zhang1-0/+2
This fixes the kernel crash when a RDMA_NLDEV_CMD_STAT_SET command is received, but the QP number parameter is not available. iwpm_register_pid: Unable to send a nlmsg (client = 2) infiniband syz1: RDMA CMA: cma_listen_on_dev, error -98 general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 9754 Comm: syz-executor069 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nla_get_u32 include/net/netlink.h:1474 [inline] RIP: 0010:nldev_stat_set_doit+0x63c/0xb70 drivers/infiniband/core/nldev.c:1760 Code: fc 01 0f 84 58 03 00 00 e8 41 83 bf fb 4c 8b a3 58 fd ff ff 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 6d RSP: 0018:ffffc900068bf350 EFLAGS: 00010247 RAX: dffffc0000000000 RBX: ffffc900068bf728 RCX: ffffffff85b60470 RDX: 0000000000000000 RSI: ffffffff85b6047f RDI: 0000000000000004 RBP: ffffc900068bf750 R08: ffff88808c3ee140 R09: ffff8880a25e6010 R10: ffffed10144bcddc R11: ffff8880a25e6ee3 R12: 0000000000000000 R13: ffff88809acb0000 R14: ffff888092a42c80 R15: 000000009ef2e29a FS: 0000000001ff0880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4733e34000 CR3: 00000000a9b27000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rdma_nl_rcv_msg drivers/infiniband/core/netlink.c:195 [inline] rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x5d9/0x980 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x59e/0x7e0 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:672 ____sys_sendmsg+0x753/0x880 net/socket.c:2343 ___sys_sendmsg+0x100/0x170 net/socket.c:2397 __sys_sendmsg+0x105/0x1d0 net/socket.c:2430 __do_sys_sendmsg net/socket.c:2439 [inline] __se_sys_sendmsg net/socket.c:2437 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2437 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4403d9 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc0efbc5c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004403d9 RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000004 RBP: 00000000006ca018 R08: 0000000000000008 R09: 00000000004002c8 R10: 000000000000004a R11: 0000000000000246 R12: 0000000000401c60 R13: 0000000000401cf0 R14: 0000000000000000 R15: 0000000000000000 Fixes: b389327df905 ("RDMA/nldev: Allow counter manual mode configration through RDMA netlink") Link: https://lore.kernel.org/r/[email protected] Reported-by: [email protected] Signed-off-by: Mark Zhang <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/odp: Ensure the mm is still alive before creating an implicit childJason Gunthorpe1-5/+19
Registration of a mmu_notifier requires the caller to hold a mmget() on the mm as registration is not permitted to race with exit_mmap(). There is a BUG_ON inside the mmu_notifier to guard against this. Normally creating a umem is done against current which implicitly holds the mmget(), however an implicit ODP child is created from a pagefault work queue and is not guaranteed to have a mmget(). Call mmget() around this registration and abort faulting if the MM has gone to exit_mmap(). Before the patch below the notifier was registered when the implicit ODP parent was created, so there was no chance to register a notifier outside of current. Fixes: c571feca2dc9 ("RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-03-04RDMA/core: Fix protection fault in ib_mr_pool_destroyMaor Gottlieb3-19/+14
Fix NULL pointer dereference in the error flow of ib_create_qp_user when accessing to uninitialized list pointers - rdma_mrs and sig_mrs. The following crash from syzkaller revealed it. kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 23167 Comm: syz-executor.1 Not tainted 5.5.0-rc5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:ib_mr_pool_destroy+0x81/0x1f0 Code: 00 00 fc ff df 49 c1 ec 03 4d 01 fc e8 a8 ea 72 fe 41 80 3c 24 00 0f 85 62 01 00 00 48 8b 13 48 89 d6 4c 8d 6a c8 48 c1 ee 03 <42> 80 3c 3e 00 0f 85 34 01 00 00 48 8d 7a 08 4c 8b 02 48 89 fe 48 RSP: 0018:ffffc9000951f8b0 EFLAGS: 00010046 RAX: 0000000000040000 RBX: ffff88810f268038 RCX: ffffffff82c41628 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffc9000951f850 RBP: ffff88810f268020 R08: 0000000000000004 R09: fffff520012a3f0a R10: 0000000000000001 R11: fffff520012a3f0a R12: ffffed1021e4d007 R13: ffffffffffffffc8 R14: 0000000000000246 R15: dffffc0000000000 FS: 00007f54bc788700(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000116920002 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rdma_rw_cleanup_mrs+0x15/0x30 ib_destroy_qp_user+0x674/0x7d0 ib_create_qp_user+0xb01/0x11c0 create_qp+0x1517/0x2130 ib_uverbs_create_qp+0x13e/0x190 ib_uverbs_write+0xaa5/0xdf0 __vfs_write+0x7c/0x100 vfs_write+0x168/0x4a0 ksys_write+0xc8/0x200 do_syscall_64+0x9c/0x390 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x465b49 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f54bc787c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000465b49 RDX: 0000000000000040 RSI: 0000000020000540 RDI: 0000000000000003 RBP: 00007f54bc787c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f54bc7886bc R13: 00000000004ca2ec R14: 000000000070ded0 R15: 0000000000000005 Fixes: a060b5629ab0 ("IB/core: generic RDMA READ/WRITE API") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.