aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-04-23drm: amd/display: fix Kconfig help textRandy Dunlap1-6/+2
Fix help text: indent one tab + 2 spaces; end a sentence with a period; and collapse short lines of text to one line. Fixes: 23c61b4599c4 ("drm/amd: Fix Kconfig indentation") Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-23drm/amdgpu: request reg_val_offs each kiq read regYintian Tao7-29/+41
According to the current kiq read register method, there will be race condition when using KIQ to read register if multiple clients want to read at same time just like the expample below: 1. client-A start to read REG-0 throguh KIQ 2. client-A poll the seqno-0 3. client-B start to read REG-1 through KIQ 4. client-B poll the seqno-1 5. the kiq complete these two read operation 6. client-A to read the register at the wb buffer and get REG-1 value Therefore, use amdgpu_device_wb_get() to request reg_val_offs for each kiq read register. v2: fix the error remove v3: fix the print typo v4: remove unused variables Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: change how we update mmRLC_SPM_MC_CNTLChristian König3-8/+28
In pp_one_vf mode avoid the extra overhead and read/write the registers without the KIQ. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Acked-by: Yintian Tao <yintian.tao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: set error query ready after all IPs late initDennis Li2-5/+3
If set error query ready in amdgpu_ras_late_init, which will cause some IP blocks aren't initialized, but their error query is ready. Signed-off-by: Dennis Li <Dennis.Li@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: code cleanup around gpu resetEvan Quan1-10/+4
Make code more readable. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: optimize the gpu reset for XGMI setup V2Evan Quan1-51/+25
This is basically just some code cosmetic. The current design for XGMI setup gput reset is to operate on current device(adev) first and then on other devices from the hive(by another 'for' loop). But actually we can do some sort to the device list(to put current device 1st position) and handle all the devices in a single 'for' loop. V2: added missing hive->hive_lock protection Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: correct cancel_delayed_work_sync on gpu resetEvan Quan1-0/+2
As for XGMI setup, it should be performed on other devices from the hive also. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: correct fbdev suspend on gpu resetEvan Quan1-1/+1
As for XGMI setup, it needs to be performed on all the devices from the same hive. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: cleanup coding style in amdkfd a bitBernard Zhao1-11/+9
Make the code a bit more readable by using a common error handling pattern. Signed-off-by: Bernard Zhao <bernard@vivo.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: clean up unused variable about ring lruKevin Wang2-6/+0
clean up unused variable: 1. ring_lru_list 2. ring_lru_list_lock related-commit: drm/amdgpu: remove ring lru handling Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: replace DRM prefix with PCI device info for gfx/mmhubDennis Li2-16/+31
Prefix RAS message printing in gfx/mmhub with PCI device info, which assists the debug in multiple GPU case. Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/powerplay: limit smu support to Arcturus for onevfJiansong Chen1-1/+4
Under onevf mode the smu support to other chips is not well verified yet. Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: disble vblank when unloading sriov driverJiawei1-1/+2
disble vblank in dce_vitual_crtc_commit(), which is skipped under sriov before Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Jiawei <Jiawei.Gu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: Print CU information by default during initializationYong Zhao1-1/+2
This is convenient for multiple teams to obtain the information. Also, add device info by using dev_info(). Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Dennis Li <Dennis.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/powerplay: update smu12_driver_if.h to align with pmfwPrike Liang1-15/+25
Update the smu12_driver_if.h header to follow the pmfw release. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu/powerplay:avoid to show invalid DPM table infoYuxian Dai1-0/+2
for different ASIC support different the number of DPM levels, we should avoid to show the invalid level value. v1 -> v2: follow the suggestion,clarifiy the description for this change Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Yuxian Dai <Yuxian.Dai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdgpu: Adjust the SDMA doorbell info printingYong Zhao2-2/+2
Turn off the printing by default because it is not very useful, while adding more details. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amdkfd: Adjust three kfd dmesg printings during initializationYong Zhao2-3/+1
Delete two printings which are not very useful, and change one from pr_info() to pr_debug(). Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: fix bug in the logic for panel power controlAnthony Koo1-1/+1
[Why] there's a bug in the new logic for panel power control. the check is wrong, and will skip panel power control under the wrong conditions. [How] fix to check for NULL panel_cntl Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Convert memory from cpu to fw endianness correctlyWyatt Wood1-27/+31
[Why] Current code does not guarantee the correct endianness of memory being copied to fw, specifically in the case where cpu isn't little endian. [How] Windows and Diags are always little endian, so we define a macro that does nothing. Linux already defines this macro and will do the correct endianness conversion. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Fix green screen issue after suspendRodrigo Siqueira1-9/+29
[why] We have seen a green screen after resume from suspend in a Raven system connected with two displays (HDMI and DP) on X based system. We noticed that this issue is related to bad DCC metadata from user space which may generate hangs and consequently an underflow on HUBP. After taking a deep look at the code path we realized that after resume we try to restore the commit with the DCC enabled framebuffer but the framebuffer is no longer valid. [how] This problem was only reported on Raven based system and after suspend, for this reason, this commit adds a new parameter on fill_plane_dcc_attributes() to give the option of disabling DCC programmatically. In summary, for disabling DCC we first verify if is a Raven system and if it is in suspend; if both conditions are true we disable DCC temporarily, otherwise, it is enabled. Co-developed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Adjust refactored dm for color management onlyStylon Wang3-14/+14
[Why] Commit cdde482caabf2adad47d23f0d1e235db2c4f2b7d is causing regression from changing the order of call sequence. [How] Keep the call sequence and take in extra dm state only if plane-level color management is enabled. Fixes: cdde482caabf2a ("drm/amd/display: Refactor color management to take dm plane state") Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: access ABM from stream resource.Yongqiang Sun1-16/+23
[Why] Since ABM resource is mapped to stream res, all the ABM access should via stream res. [How] Get ABM instance from stream res instead of resource pool. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: blank dp stream before re-train the linkXiaodong Yan1-0/+12
[Why] When link loss happened, monitor can not light up if only re-train the link. [How] Blank all the DP streams on this link before re-train the link, and then unblank the stream Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: DispalyPort: Write OUI only if panel supports itAurabindo Pillai1-0/+15
[why] Organizational Unit Identifier register is optional, and its presence is published via Down Stream Port Count register. Writing this register when not available will result in errors [how] Read this register and continue writing OUI only if the panel has the support advertised. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: change from panel to panel cntlAnthony Koo16-249/+251
[Why] it doesn't represent panel specifically, it's more like the control logic for the panel [How] change from panel to panel cntl to make it a bit more clear Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Add HW rotation cursor changes to dcn10Jaehyun Chung1-5/+13
[Why] HW rotation was enabled in DAL3 but hubp cursor calculations for HW roation were only added to dcn20. [How] Add hubp cursor position calculation changes to dcn10. Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Factor in immediate flip support into DLG calculationsNicholas Kazlauskas1-1/+1
[Why] We expect to be able to perform immediate flipping without having to recalculate and update all the watermarks. There are certain usecases today (1080p @ 90deg, 2160p @ 90deg) such that we get a urgency value of 0 for frac_urg_bw_flip because we're explicitly passing in a value of "false" for requiring immediate flip support into the DLG calculation. [How] Always pass in true into the calculation. With this we get a correct non-zero value for frac_urg_bw_flip. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: fix virtual signal dsc setupDmytro Laktyushkin1-1/+1
This prevents dpcd access on virtual links. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: destroy panel on link destructAnthony Koo1-0/+3
[Why] without destroy it is causing a memory leak [How] destroy panel on link destruct Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: dmcu wait loop calculation is incorrect in RVPaul Hsieh1-3/+0
[Why] Driver already get display clock from SMU base on MHz, but driver read again and mutiple 1000 cause wait loop value is overflow. [How] remove coding error Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: move panel power seq to new panel structAnthony Koo22-94/+572
[Why] panel power sequencer is currently just sitting in hwseq but it really it tied to internal panels [How] make a new panel struct to contain power sequencer code Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: make all backlight calls link basedAnthony Koo5-32/+33
[Why] Backlight adjustment is tied to a specific display. So make the calls target a link rather than making it a global state. [How] make all backlight calls link based Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Cap certain DML values for Low Pix Clk on DCN2.1Sung Lee1-2/+10
[WHY] In certain conditions with low pixel clock, some values in DML may go past the max due to margining for latency hiding. This causes assertions to get hit. [HOW] If the pixel clock is low and some values are high, cap it to the max. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Various fixes for PSR on DMCUBWyatt Wood3-1/+51
[Why] - Driver does not recognize new definitions of psr states. - Internal tool is required for checking if psr is active. [How] - Parse psr state correctly so that driver will recognize psr state. - Add visual confirmation that psr is active using existing mechanisms. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: 3.2.81Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Update MPCC if requestedAric Cyr1-1/+2
Don't skip MPCC tree updates if requested. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Fix HDR visual confirmAric Cyr1-10/+10
Some cases were incorrectly reporting the wrong visual confirm, even though they were working as expected. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Use the correct input TF for video formatsNicholas Kazlauskas1-3/+19
[Why] Color blending for NV12 formats is incorrect because we're using the predefined SRGB degamma. [How] Calculate the correct input transfer function for degamma from the color module depending on what the actual surface format is. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Change infopacket type programmingHaiyi Zhou3-10/+99
[Why] Certain displays may experience blanking if infopacket max range does not equal nominal refresh rate. [How] Add additional infopacket versions to program range to full or forced range in freesync states. This does not change the vrr logic. Signed-off-by: Haiyi Zhou <haiyi.zhou@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Avoid NULL pointer in set_backlight when ABM is NULLNicholas Kazlauskas1-2/+1
[Why] On ASIC without ABM support (most dGPU) we run into a null pointer dereference when attempting to set the backlight level. [How] This function requires ABM, so fix up the condition to only allow DMCU to be optional. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: fix stream setting for diags on siliconDmytro Laktyushkin1-2/+2
We need to set up stream even with virtual displays when running diags. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Cast int to float before divisionSung Lee1-2/+2
[Why]: Some inputs to dml_ceil have it dividied by int which causes a truncation. This loss of precision means the ceil function becomes redundant and does not round up. [How]: Cast parameter to float before division. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Set meta_chunk_value to 0 in DML if DCC disabled in DCN2.1Sung Lee1-1/+4
[WHY]: Calculating refcyc_per_meta_chunk_vblank_l when DCC is disabled may lead to a large number causing an assert to get hit. In VBA, this value is 0 when DCC is disabled. [HOW]: Set value to 0 to avoid hitting the assert. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: add optc get crc support for timings with ODM/DSCWenjing Liu5-3/+33
[why] Optc needs to know if timing is enabled with ODM or DSC before computing crc. Otherwise value computed will be inaccurate. Before this change, the CRC computed without ODM is not equal to the CRC computed with ODM for the same timing. This is unexpected as we are driving the same timing despite of the underlaying hardware setup to achieve it. This is caused by missing hardware programming sequence to support it. [how] Add the new programming sequence based on hardware guide. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Workaround to disable YCbCrJinze Xu2-1/+3
[Why] Some mst dock can't translate DP to HDMI properly. [How] Bypass YCbCr timings on specific MST device. Signed-off-by: Jinze Xu <jinze.xu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Check ramp != NULL before applying lut1d for degammaNicholas Kazlauskas1-1/+1
[Why] A NULL ramp is a valid configuration for passing into mod_color_calculate_degamma_params but we'll hit a NULL pointer if we do so. We need this in order to get the right transfer function to do degamma on NV12 formats where we aren't supplied with a custom user degamma. [How] Add the NULL check. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Unify psr feature flagsWyatt Wood13-39/+72
[Why] As it stands, psr has feature flags in dm, stream, and link. Most are not defined well enough, and different dm layers have different uses for these same flags. [How] We define a new structure called psr_settings in dc_link that will hold the following psr feature flags: psr_feature_enable - psr is supported psr_allow_active - psr is currently active psr_version - internal psr version supported psr_frame_capture_indication_req psr_sdp_transmit_line_num_deadline The last two flags were moved out of the power module for the purposes of consolidating psr flags. Their use is already well-defined. Psr caps reported by sink will also be stored in dc_link, in dpcd_caps.psr_caps. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Support plane-level gamut remap in DMStylon Wang1-0/+3
[Why] Plane-level gamut remap is not enabled in DM, which is necessary to support CTM as a plane-level property. [How] Enable gamut remap in DM. Signed-off-by: Stylon Wang <stylon.wang@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-22drm/amd/display: Add SetBacklight call to abm on dmcubWyatt Wood4-9/+9
[Why] Set backlight calls to firmware are are being prevented by dmcu == null check. Dmcu is expected to be null in this case. [How] Only prevent call if dmcu and abm are null. Also rename variable 'use_smooth_brightness' to 'fw_set_brightness' as it's more appropriate. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Powered by cgit, Gruvboxed by Blaster4385.