aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-04-17SUNRPC: Ignore queue transmission errors on successful transmissionTrond Myklebust1-2/+5
If a request transmission fails due to write space or slot unavailability errors, but the queued task then gets transmitted before it has time to process the error in call_transmit_status() or call_bc_transmit_status(), we need to suppress the transmission error code to prevent it from leaking out of the RPC layer. Reported-by: Chuck Lever <[email protected]> Signed-off-by: Trond Myklebust <[email protected]> Tested-by: Chuck Lever <[email protected]>
2019-04-17io_uring: fix CQ overflow conditionJens Axboe1-1/+1
This is a leftover from when the rings initially were not free flowing, and hence a test for tail + 1 == head would indicate full. Since we now let them wrap instead of mask them with the size, we need to check if they drift more than the ring size from each other. This fixes a case where we'd overwrite CQ ring entries, if the user failed to reap completions. Both cases would ultimately result in lost completions as the application violated the depth it asked for. The only difference is that before this fix we'd return invalid entries for the overflowed completions, instead of properly flagging it in the cq_ring->overflow variable. Reported-by: Stefan Bühler <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-04-17perf bpf: Return NULL when RB tree lookup fails in perf_env__find_btf()Jiri Olsa1-1/+3
We don't return NULL when we don't find the bpf_prog_info_node, fix that. Signed-off-by: Jiri Olsa <[email protected]> Reported-by: Song Liu <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Fixes: 3792cb2ff43b ("perf bpf: Save BTF in a rbtree in perf_env") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-17perf tools: Fix map reference countingJiri Olsa1-3/+1
By calling maps__insert() we assume to get 2 references on the map, which we relese within maps__remove call. However if there's already same map name, we currently don't bump the reference and can crash, like: Program received signal SIGABRT, Aborted. 0x00007ffff75e60f5 in raise () from /lib64/libc.so.6 (gdb) bt #0 0x00007ffff75e60f5 in raise () from /lib64/libc.so.6 #1 0x00007ffff75d0895 in abort () from /lib64/libc.so.6 #2 0x00007ffff75d0769 in __assert_fail_base.cold () from /lib64/libc.so.6 #3 0x00007ffff75de596 in __assert_fail () from /lib64/libc.so.6 #4 0x00000000004fc006 in refcount_sub_and_test (i=1, r=0x1224e88) at tools/include/linux/refcount.h:131 #5 refcount_dec_and_test (r=0x1224e88) at tools/include/linux/refcount.h:148 #6 map__put (map=0x1224df0) at util/map.c:299 #7 0x00000000004fdb95 in __maps__remove (map=0x1224df0, maps=0xb17d80) at util/map.c:953 #8 maps__remove (maps=0xb17d80, map=0x1224df0) at util/map.c:959 #9 0x00000000004f7d8a in map_groups__remove (map=<optimized out>, mg=<optimized out>) at util/map_groups.h:65 #10 machine__process_ksymbol_unregister (sample=<optimized out>, event=0x7ffff7279670, machine=<optimized out>) at util/machine.c:728 #11 machine__process_ksymbol (machine=<optimized out>, event=0x7ffff7279670, sample=<optimized out>) at util/machine.c:741 #12 0x00000000004fffbb in perf_session__deliver_event (session=0xb11390, event=0x7ffff7279670, tool=0x7fffffffc7b0, file_offset=13936) at util/session.c:1362 #13 0x00000000005039bb in do_flush (show_progress=false, oe=0xb17e80) at util/ordered-events.c:243 #14 __ordered_events__flush (oe=0xb17e80, how=OE_FLUSH__ROUND, timestamp=<optimized out>) at util/ordered-events.c:322 #15 0x00000000005005e4 in perf_session__process_user_event (session=session@entry=0xb11390, event=event@entry=0x7ffff72a4af8, ... Add the map to the list and getting the reference event if we find the map with same name. Signed-off-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Eric Saint-Etienne <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Fixes: 1e6285699b30 ("perf symbols: Fix slowness due to -ffunction-section") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-17perf evlist: Fix side band thread drainingJiri Olsa1-5/+9
Current perf_evlist__poll_thread() code could finish without draining the data. Adding the logic that makes sure we won't finish before the drain. Signed-off-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Song Liu <[email protected]> Fixes: 657ee5531903 ("perf evlist: Introduce side band thread") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-17perf tools: Check maps for bpf programsSong Liu2-1/+19
As reported by Jiri Olsa in: "[BUG] perf: intel_pt won't display kernel function" https://lore.kernel.org/lkml/20190403143738.GB32001@krava Recent changes to support PERF_RECORD_KSYMBOL and PERF_RECORD_BPF_EVENT broke --kallsyms option. This is because it broke test __map__is_kmodule. This patch fixes this by adding check for bpf program, so that these maps are not mistaken as kernel modules. Signed-off-by: Song Liu <[email protected]> Reported-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Yonghong Song <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Fixes: 76193a94522f ("perf, bpf: Introduce PERF_RECORD_KSYMBOL") Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-17perf bpf: Return NULL when RB tree lookup fails in ↵Jiri Olsa1-1/+3
perf_env__find_bpf_prog_info() We currently don't return NULL in case we don't find the bpf_prog_info_node, fixing that. Signed-off-by: Jiri Olsa <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Fixes: e4378f0cb90b ("perf bpf: Save bpf_prog_info in a rbtree in perf_env") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-17Merge tag 'for-linus-5.1-2' of git://github.com/cminyard/linux-ipmiLinus Torvalds3-3/+19
Pull IPMI fixes from Corey Minyard: "Fixes for some bugs cause by recent changes. One crash if you feed bad data to the module parameters, one BUG that sometimes occurs when a user closes the connection, and one bug that cause the driver to not work if the configuration information only comes in from SMBIOS" * tag 'for-linus-5.1-2' of git://github.com/cminyard/linux-ipmi: ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrier ipmi: ipmi_si_hardcode.c: init si_type array to fix a crash ipmi: Fix failure on SMBIOS specified devices
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds125-741/+1118
Pull networking fixes from David Miller: 1) Handle init flow failures properly in iwlwifi driver, from Shahar S Matityahu. 2) mac80211 TXQs need to be unscheduled on powersave start, from Felix Fietkau. 3) SKB memory accounting fix in A-MDSU aggregation, from Felix Fietkau. 4) Increase RCU lock hold time in mlx5 FPGA code, from Saeed Mahameed. 5) Avoid checksum complete with XDP in mlx5, also from Saeed. 6) Fix netdev feature clobbering in ibmvnic driver, from Thomas Falcon. 7) Partial sent TLS record leak fix from Jakub Kicinski. 8) Reject zero size iova range in vhost, from Jason Wang. 9) Allow pending work to complete before clcsock release from Karsten Graul. 10) Fix XDP handling max MTU in thunderx, from Matteo Croce. 11) A lot of protocols look at the sa_family field of a sockaddr before validating it's length is large enough, from Tetsuo Handa. 12) Don't write to free'd pointer in qede ptp error path, from Colin Ian King. 13) Have to recompile IP options in ipv4_link_failure because it can be invoked from ARP, from Stephen Suryaputra. 14) Doorbell handling fixes in qed from Denis Bolotin. 15) Revert net-sysfs kobject register leak fix, it causes new problems. From Wang Hai. 16) Spectre v1 fix in ATM code, from Gustavo A. R. Silva. 17) Fix put of BROPT_VLAN_STATS_PER_PORT in bridging code, from Nikolay Aleksandrov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (111 commits) socket: fix compat SO_RCVTIMEO_NEW/SO_SNDTIMEO_NEW tcp: tcp_grow_window() needs to respect tcp_space() ocelot: Clean up stats update deferred work ocelot: Don't sleep in atomic context (irqs_disabled()) net: bridge: fix netlink export of vlan_stats_per_port option qed: fix spelling mistake "faspath" -> "fastpath" tipc: set sysctl_tipc_rmem and named_timeout right range tipc: fix link established but not in session net: Fix missing meta data in skb with vlan packet net: atm: Fix potential Spectre v1 vulnerabilities net/core: work around section mismatch warning for ptp_classifier net: bridge: fix per-port af_packet sockets bnx2x: fix spelling mistake "dicline" -> "decline" route: Avoid crash from dereferencing NULL rt->from MAINTAINERS: normalize Woojung Huh's email address bonding: fix event handling for stacked bonds Revert "net-sysfs: Fix memory leak in netdev_register_kobject" rtnetlink: fix rtnl_valid_stats_req() nlmsg_len check qed: Fix the DORQ's attentions handling qed: Fix missing DORQ attentions ...
2019-04-17ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrierCorey Minyard1-2/+17
free_user() could be called in atomic context. This patch pushed the free operation off into a workqueue. Example: BUG: sleeping function called from invalid context at kernel/workqueue.c:2856 in_atomic(): 1, irqs_disabled(): 0, pid: 177, name: ksoftirqd/27 CPU: 27 PID: 177 Comm: ksoftirqd/27 Not tainted 4.19.25-3 #1 Hardware name: AIC 1S-HV26-08/MB-DPSB04-06, BIOS IVYBV060 10/21/2015 Call Trace: dump_stack+0x5c/0x7b ___might_sleep+0xec/0x110 __flush_work+0x48/0x1f0 ? try_to_del_timer_sync+0x4d/0x80 _cleanup_srcu_struct+0x104/0x140 free_user+0x18/0x30 [ipmi_msghandler] ipmi_free_recv_msg+0x3a/0x50 [ipmi_msghandler] deliver_response+0xbd/0xd0 [ipmi_msghandler] deliver_local_response+0xe/0x30 [ipmi_msghandler] handle_one_recv_msg+0x163/0xc80 [ipmi_msghandler] ? dequeue_entity+0xa0/0x960 handle_new_recv_msgs+0x15c/0x1f0 [ipmi_msghandler] tasklet_action_common.isra.22+0x103/0x120 __do_softirq+0xf8/0x2d7 run_ksoftirqd+0x26/0x50 smpboot_thread_fn+0x11d/0x1e0 kthread+0x103/0x140 ? sort_range+0x20/0x20 ? kthread_destroy_worker+0x40/0x40 ret_from_fork+0x1f/0x40 Fixes: 77f8269606bf ("ipmi: fix use-after-free of user->release_barrier.rda") Reported-by: Konstantin Khlebnikov <[email protected]> Signed-off-by: Corey Minyard <[email protected]> Cc: [email protected] # 5.0 Cc: Yang Yingliang <[email protected]>
2019-04-17vt: fix cursor when clearing the screenMikulas Patocka1-1/+2
The patch a6dbe4427559 ("vt: perform safe console erase in the right order") introduced a bug. The conditional do_update_region() was replaced by a call to update_region() that does contain the conditional already, but with unwanted extra side effects such as restoring the cursor drawing. In order to reproduce the bug: - use framebuffer console with the AMDGPU driver - type "links" to start the console www browser - press 'q' and space to exit links Now the cursor will be permanently visible in the center of the screen. It will stay there until something overwrites it. The bug goes away if we change update_region() back to the conditional do_update_region(). [ nico: reworded changelog ] Signed-off-by: Mikulas Patocka <[email protected]> Reviewed-by: Nicolas Pitre <[email protected]> Cc: [email protected] Fixes: a6dbe4427559 ("vt: perform safe console erase in the right order") Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-04-17staging: comedi: ni_usb6501: Fix possible double-free of ->usb_rx_bufIan Abbott1-3/+1
`ni6501_alloc_usb_buffers()` is called from `ni6501_auto_attach()` to allocate RX and TX buffers for USB transfers. It allocates `devpriv->usb_rx_buf` followed by `devpriv->usb_tx_buf`. If the allocation of `devpriv->usb_tx_buf` fails, it frees `devpriv->usb_rx_buf`, leaving the pointer set dangling, and returns an error. Later, `ni6501_detach()` will be called from the core comedi module code to clean up. `ni6501_detach()` also frees both `devpriv->usb_rx_buf` and `devpriv->usb_tx_buf`, but `devpriv->usb_rx_buf` may have already beed freed, leading to a double-free error. Fix it bu removing the call to `kfree(devpriv->usb_rx_buf)` from `ni6501_alloc_usb_buffers()`, relying on `ni6501_detach()` to free the memory. Signed-off-by: Ian Abbott <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-04-17staging: comedi: ni_usb6501: Fix use of uninitialized mutexIan Abbott1-3/+3
If `ni6501_auto_attach()` returns an error, the core comedi module code will call `ni6501_detach()` to clean up. If `ni6501_auto_attach()` successfully allocated the comedi device private data, `ni6501_detach()` assumes that a `struct mutex mut` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `ni6501_auto_attach()` can return an error after allocating the device private data but before initializing the mutex, so this assumption is invalid. Fix it by initializing the mutex just after allocating the private data in `ni6501_auto_attach()` before any other errors can be retturned. Also move the call to `usb_set_intfdata()` just to keep the code a bit neater (either position for the call is fine). I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=cf4f2b6c24aff0a3edf6>: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? usb 1-1: string descriptor 0 read error: -71 comedi comedi0: Wrong number of endpoints ni6501 1-1:0.233: driver 'ni6501' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 585 Comm: kworker/0:3 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xfe/0x12b0 kernel/locking/mutex.c:1072 ni6501_detach+0x5b/0x110 drivers/staging/comedi/drivers/ni_usb6501.c:567 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: [email protected] Signed-off-by: Ian Abbott <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-04-17ALSA: hda/realtek - add two more pin configuration sets to quirk tableHui Wang1-0/+6
We have two Dell laptops which have the codec 10ec0236 and 10ec0256 respectively, the headset mic on them can't work, need to apply the quirk of ALC255_FIXUP_DELL1_MIC_NO_PRESENCE. So adding their pin configurations in the pin quirk table. Cc: <[email protected]> Signed-off-by: Hui Wang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-04-17s390: correct some inline assembly constraintsVasily Gorbik2-5/+5
Inline assembly code changed in this patch should really use "Q" constraint "Memory reference without index register and with short displacement". The kernel build with kasan instrumentation enabled might occasionally break otherwise (due to stack instrumentation). Signed-off-by: Vasily Gorbik <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2019-04-17drm/tegra: hdmi: Setup audio only if configuredThierry Reding1-3/+9
The audio configuration is only valid if the HDMI codec has been properly set up. Do not attempt to set up audio before that happens because it causes a division by zero. Note that this is only problematic on Tegra20 and Tegra30. Later chips implement the division instructions which return zero when dividing by zero and don't throw an exception. Fixes: db5adf4d6dce ("drm/tegra: hdmi: Fix audio to work with any pixel clock rate") Reported-by: Marcel Ziswiler <[email protected]> Tested-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2019-04-16socket: fix compat SO_RCVTIMEO_NEW/SO_SNDTIMEO_NEWArnd Bergmann1-2/+2
It looks like the new socket options only work correctly for native execution, but in case of compat mode fall back to the old behavior as we ignore the 'old_timeval' flag. Rework so we treat SO_RCVTIMEO_NEW/SO_SNDTIMEO_NEW the same way in compat and native 32-bit mode. Cc: Deepa Dinamani <[email protected]> Fixes: a9beb86ae6e5 ("sock: Add SO_RCVTIMEO_NEW and SO_SNDTIMEO_NEW") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Deepa Dinamani <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16tcp: tcp_grow_window() needs to respect tcp_space()Eric Dumazet1-5/+5
For some reason, tcp_grow_window() correctly tests if enough room is present before attempting to increase tp->rcv_ssthresh, but does not prevent it to grow past tcp_space() This is causing hard to debug issues, like failing the (__tcp_select_window(sk) >= tp->rcv_wnd) test in __tcp_ack_snd_check(), causing ACK delays and possibly slow flows. Depending on tcp_rmem[2], MTU, skb->len/skb->truesize ratio, we can see the problem happening on "netperf -t TCP_RR -- -r 2000,2000" after about 60 round trips, when the active side no longer sends immediate acks. This bug predates git history. Signed-off-by: Eric Dumazet <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Acked-by: Neal Cardwell <[email protected]> Acked-by: Wei Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16ocelot: Clean up stats update deferred workClaudiu Manoil1-8/+14
This is preventive cleanup that may save troubles later. No need to cancel repeateadly queued work if code is properly refactored. Don't let the ethtool -s process interfere with the stat workqueue scheduling. Signed-off-by: Claudiu Manoil <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16ocelot: Don't sleep in atomic context (irqs_disabled())Claudiu Manoil1-1/+1
Preemption disabled at: [<ffff000008cabd54>] dev_set_rx_mode+0x1c/0x38 Call trace: [<ffff00000808a5c0>] dump_backtrace+0x0/0x3d0 [<ffff00000808a9a4>] show_stack+0x14/0x20 [<ffff000008e6c0c0>] dump_stack+0xac/0xe4 [<ffff0000080fe76c>] ___might_sleep+0x164/0x238 [<ffff0000080fe890>] __might_sleep+0x50/0x88 [<ffff0000082261e4>] kmem_cache_alloc+0x17c/0x1d0 [<ffff000000ea0ae8>] ocelot_set_rx_mode+0x108/0x188 [mscc_ocelot_common] [<ffff000008cabcf0>] __dev_set_rx_mode+0x58/0xa0 [<ffff000008cabd5c>] dev_set_rx_mode+0x24/0x38 Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Claudiu Manoil <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16net: bridge: fix netlink export of vlan_stats_per_port optionNikolay Aleksandrov1-1/+1
Since the introduction of the vlan_stats_per_port option the netlink export of it has been broken since I made a typo and used the ifla attribute instead of the bridge option to retrieve its state. Sysfs export is fine, only netlink export has been affected. Fixes: 9163a0fc1f0c0 ("net: bridge: add support for per-port vlan stats") Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16qed: fix spelling mistake "faspath" -> "fastpath"Colin Ian King1-1/+1
There is a spelling mistake in a DP_INFO message, fix it. Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16tipc: set sysctl_tipc_rmem and named_timeout right rangeJie Liu1-2/+6
We find that sysctl_tipc_rmem and named_timeout do not have the right minimum setting. sysctl_tipc_rmem should be larger than zero, like sysctl_tcp_rmem. And named_timeout as a timeout setting should be not less than zero. Fixes: cc79dd1ba9c10 ("tipc: change socket buffer overflow control to respect sk_rcvbuf") Fixes: a5325ae5b8bff ("tipc: add name distributor resiliency queue") Signed-off-by: Jie Liu <[email protected]> Reported-by: Qiang Ning <[email protected]> Reviewed-by: Zhiqiang Liu <[email protected]> Reviewed-by: Miaohe Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16tipc: fix link established but not in sessionTuong Lien1-0/+2
According to the link FSM, when a link endpoint got RESET_MSG (- a traditional one without the stopping bit) from its peer, it moves to PEER_RESET state and raises a LINK_DOWN event which then resets the link itself. Its state will become ESTABLISHING after the reset event and the link will be re-established soon after this endpoint starts to send ACTIVATE_MSG to the peer. There is no problem with this mechanism, however the link resetting has cleared the link 'in_session' flag (along with the other important link data such as: the link 'mtu') that was correctly set up at the 1st step (i.e. when this endpoint received the peer RESET_MSG). As a result, the link will become ESTABLISHED, but the 'in_session' flag is not set, and all STATE_MSG from its peer will be dropped at the link_validate_msg(). It means the link not synced and will sooner or later face a failure. Since the link reset action is obviously needed for a new link session (this is also true in the other situations), the problem here is that the link is re-established a bit too early when the link endpoints are not really in-sync yet. The commit forces a resync as already done in the previous commit 91986ee166cf ("tipc: fix link session and re-establish issues") by simply varying the link 'peer_session' value at the link_reset(). Acked-by: Jon Maloy <[email protected]> Signed-off-by: Tuong Lien <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16net: Fix missing meta data in skb with vlan packetYuya Kusakabe1-1/+9
skb_reorder_vlan_header() should move XDP meta data with ethernet header if XDP meta data exists. Fixes: de8f3a83b0a0 ("bpf: add meta pointer for direct access") Signed-off-by: Yuya Kusakabe <[email protected]> Signed-off-by: Takeru Hayasaka <[email protected]> Co-developed-by: Takeru Hayasaka <[email protected]> Reviewed-by: Toshiaki Makita <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16net: atm: Fix potential Spectre v1 vulnerabilitiesGustavo A. R. Silva1-1/+5
arg is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: net/atm/lec.c:715 lec_mcast_attach() warn: potential spectre issue 'dev_lec' [r] (local cap) Fix this by sanitizing arg before using it to index dev_lec. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16net/core: work around section mismatch warning for ptp_classifierArd Biesheuvel1-3/+4
The routine ptp_classifier_init() uses an initializer for an automatic struct type variable which refers to an __initdata symbol. This is perfectly legal, but may trigger a section mismatch warning when running the compiler in -fpic mode, due to the fact that the initializer may be emitted into an anonymous .data section thats lack the __init annotation. So work around it by using assignments instead. Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Gerald Schaefer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16net: bridge: fix per-port af_packet socketsNikolay Aleksandrov1-9/+14
When the commit below was introduced it changed two visible things: - the skb was no longer passed through the protocol handlers with the original device - the skb was passed up the stack with skb->dev = bridge The first change broke af_packet sockets on bridge ports. For example we use them for hostapd which listens for ETH_P_PAE packets on the ports. We discussed two possible fixes: - create a clone and pass it through NF_HOOK(), act on the original skb based on the result - somehow signal to the caller from the okfn() that it was called, meaning the skb is ok to be passed, which this patch is trying to implement via returning 1 from the bridge link-local okfn() Note that we rely on the fact that NF_QUEUE/STOLEN would return 0 and drop/error would return < 0 thus the okfn() is called only when the return was 1, so we signal to the caller that it was called by preserving the return value from nf_hook(). Fixes: 8626c56c8279 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-16ipmi: ipmi_si_hardcode.c: init si_type array to fix a crashTony Camuso1-0/+2
The intended behavior of function ipmi_hardcode_init_one() is to default to kcs interface when no type argument is presented when initializing ipmi with hard coded addresses. However, the array of char pointers allocated on the stack by function ipmi_hardcode_init() was not inited to zeroes, so it contained stack debris. Consequently, passing the cruft stored in this array to function ipmi_hardcode_init_one() caused a crash when it was unable to detect that the char * being passed was nonsense and tried to access the address specified by the bogus pointer. The fix is simply to initialize the si_type array to zeroes, so if there were no type argument given to at the command line, function ipmi_hardcode_init_one() could properly default to the kcs interface. Signed-off-by: Tony Camuso <[email protected]> Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
2019-04-16ipmi: Fix failure on SMBIOS specified devicesCorey Minyard1-1/+0
An extra memset was put into a place that cleared the interface type. Reported-by: Tony Camuso <[email protected]> Fixes: 3cd83bac481dc4 ("ipmi: Consolidate the adding of platform devices") Signed-off-by: Corey Minyard <[email protected]>
2019-04-16Merge tag 'riscv-for-linus-5.1-rc6' of ↵Linus Torvalds3-0/+110
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "This contains an assortment of RISC-V-related fixups that we found after rc4. They're all really unrelated: - The addition of a 32-bit defconfig, to emphasize testing the 32-bit port. - A device tree bindings patch, which is pre-work for some patches that target 5.2. - A fix to support booting on systems with more physical memory than the maximum supported by the kernel" * tag 'riscv-for-linus-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Fix Maximum Physical Memory 2GiB option for 64bit systems dt-bindings: clock: sifive: add FU540-C000 PRCI clock constants RISC-V: Add separate defconfig for 32bit systems
2019-04-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds25-212/+496
Pull KVM fixes from Paolo Bonzini: "5.1 keeps its reputation as a big bugfix release for KVM x86. - Fix for a memory leak introduced during the merge window - Fixes for nested VMX with ept=0 - Fixes for AMD (APIC virtualization, NMI injection) - Fixes for Hyper-V under KVM and KVM under Hyper-V - Fixes for 32-bit SMM and tests for SMM virtualization - More array_index_nospec peppering" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits) KVM: x86: avoid misreporting level-triggered irqs as edge-triggered in tracing KVM: fix spectrev1 gadgets KVM: x86: fix warning Using plain integer as NULL pointer selftests: kvm: add a selftest for SMM selftests: kvm: fix for compilers that do not support -no-pie selftests: kvm/evmcs_test: complete I/O before migrating guest state KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernels KVM: x86: Don't clear EFER during SMM transitions for 32-bit vCPU KVM: x86: clear SMM flags before loading state while leaving SMM KVM: x86: Open code kvm_set_hflags KVM: x86: Load SMRAM in a single shot when leaving SMM KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU KVM: x86: Raise #GP when guest vCPU do not support PMU x86/kvm: move kvm_load/put_guest_xcr0 into atomic context KVM: x86: svm: make sure NMI is injected after nmi_singlestep svm/avic: Fix invalidate logical APIC id entry Revert "svm: Fix AVIC incomplete IPI emulation" kvm: mmu: Fix overflow on kvm mmu page limit calculation KVM: nVMX: always use early vmcs check when EPT is disabled KVM: nVMX: allow tests to use bad virtual-APIC page address ...
2019-04-16tools include uapi: Sync sound/asound.h copyArnaldo Carvalho de Melo1-0/+1
Picking the changes from: Fixes: b5bdbb6ccd11 ("ALSA: uapi: #include <time.h> in asound.h") Which entails no changes in the tooling side. To silence this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h' diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h Cc: Adrian Hunter <[email protected]> Cc: Daniel Mentz <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Takashi Iwai <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-16perf top: Always sample time to satisfy needs of use of ordered queuingJiri Olsa1-0/+1
Bastian reported broken 'perf top -p PID' command, it won't display any data. The problem is that for -p option we monitor single thread, so we don't enable time in samples, because it's not needed. However since commit 16c66bc167cc we use ordered queues to stash data plus later commits added logic for dropping samples in case there's big load and we don't keep up. All this needs timestamp for sample. Enabling it unconditionally for perf top. Reported-by: Bastian Beischer <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: bastian beischer <[email protected]> Fixes: 16c66bc167cc ("perf top: Add processing thread") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-16Merge tag 'perf-urgent-for-mingo-5.1-20190416' of ↵Ingo Molnar5-17/+22
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: core: Mao Han: - Use hweight64() instead of hweight_long(attr.sample_regs_user) when parsing samples, this is what the kernel uses and fixes de problem in 32-bit architectures such as C-SKY that have more than 32 registers that can come in a sample. perf stat: Jiri Olsa: - Disable DIR_FORMAT feature for 'perf stat record', fixing an assert() failure. Intel PT: Adrian Hunter: - Fix use of parent_id in calls_view in export-to-sqlite.py. BPF: Gustavo A. R. Silva: - Fix lock/unlock imbalances when processing BPF/BTF info, found by the coverity tool. libtraceevent: Rikard Falkeborn: - Fix missing equality check for strcmp(), detected by the cppcheck tool. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2019-04-16ALSA: core: Fix card races between register and disconnectTakashi Iwai1-9/+9
There is a small race window in the card disconnection code that allows the registration of another card with the very same card id. This leads to a warning in procfs creation as caught by syzkaller. The problem is that we delete snd_cards and snd_cards_lock entries at the very beginning of the disconnection procedure. This makes the slot available to be assigned for another card object while the disconnection procedure is being processed. Then it becomes possible to issue a procfs registration with the existing file name although we check the conflict beforehand. The fix is simply to move the snd_cards and snd_cards_lock clearances at the end of the disconnection procedure. The references to these entries are merely either from the global proc files like /proc/asound/cards or from the card registration / disconnection, so it should be fine to shift at the very end. Reported-by: [email protected] Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-04-16sched/deadline: Correctly handle active 0-lag timersluca abeni1-2/+1
syzbot reported the following warning: [ ] WARNING: CPU: 4 PID: 17089 at kernel/sched/deadline.c:255 task_non_contending+0xae0/0x1950 line 255 of deadline.c is: WARN_ON(hrtimer_active(&dl_se->inactive_timer)); in task_non_contending(). Unfortunately, in some cases (for example, a deadline task continuosly blocking and waking immediately) it can happen that a task blocks (and task_non_contending() is called) while the 0-lag timer is still active. In this case, the safest thing to do is to immediately decrease the running bandwidth of the task, without trying to re-arm the 0-lag timer. Signed-off-by: luca abeni <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Juri Lelli <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: chengjian (D) <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-04-16sched/fair: Limit sched_cfs_period_timer() loop to avoid hard lockupPhil Auld1-0/+25
With extremely short cfs_period_us setting on a parent task group with a large number of children the for loop in sched_cfs_period_timer() can run until the watchdog fires. There is no guarantee that the call to hrtimer_forward_now() will ever return 0. The large number of children can make do_sched_cfs_period_timer() take longer than the period. NMI watchdog: Watchdog detected hard LOCKUP on cpu 24 RIP: 0010:tg_nop+0x0/0x10 <IRQ> walk_tg_tree_from+0x29/0xb0 unthrottle_cfs_rq+0xe0/0x1a0 distribute_cfs_runtime+0xd3/0xf0 sched_cfs_period_timer+0xcb/0x160 ? sched_cfs_slack_timer+0xd0/0xd0 __hrtimer_run_queues+0xfb/0x270 hrtimer_interrupt+0x122/0x270 smp_apic_timer_interrupt+0x6a/0x140 apic_timer_interrupt+0xf/0x20 </IRQ> To prevent this we add protection to the loop that detects when the loop has run too many times and scales the period and quota up, proportionally, so that the timer can complete before then next period expires. This preserves the relative runtime quota while preventing the hard lockup. A warning is issued reporting this state and the new values. Signed-off-by: Phil Auld <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: <[email protected]> Cc: Anton Blanchard <[email protected]> Cc: Ben Segall <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2019-04-16CIFS: keep FileInfo handle live during oplock breakAurelien Aptel4-10/+53
In the oplock break handler, writing pending changes from pages puts the FileInfo handle. If the refcount reaches zero it closes the handle and waits for any oplock break handler to return, thus causing a deadlock. To prevent this situation: * We add a wait flag to cifsFileInfo_put() to decide whether we should wait for running/pending oplock break handlers * We keep an additionnal reference of the SMB FileInfo handle so that for the rest of the handler putting the handle won't close it. - The ref is bumped everytime we queue the handler via the cifs_queue_oplock_break() helper. - The ref is decremented at the end of the handler This bug was triggered by xfstest 464. Also important fix to address the various reports of oops in smb2_push_mandatory_locks Signed-off-by: Aurelien Aptel <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]> CC: Stable <[email protected]>
2019-04-16cifs: fix handle leak in smb2_query_symlink()Ronnie Sahlberg1-0/+2
If we enter smb2_query_symlink() for something that is not a symlink and where the SMB2_open() would succeed we would never end up closing this handle and would thus leak a handle on the server. Fix this by immediately calling SMB2_close() on successfull open. Signed-off-by: Ronnie Sahlberg <[email protected]> CC: Stable <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2019-04-16cifs: Fix lease buffer length errorZhangXiaoxu1-1/+4
There is a KASAN slab-out-of-bounds: BUG: KASAN: slab-out-of-bounds in _copy_from_iter_full+0x783/0xaa0 Read of size 80 at addr ffff88810c35e180 by task mount.cifs/539 CPU: 1 PID: 539 Comm: mount.cifs Not tainted 4.19 #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0xdd/0x12a print_address_description+0xa7/0x540 kasan_report+0x1ff/0x550 check_memory_region+0x2f1/0x310 memcpy+0x2f/0x80 _copy_from_iter_full+0x783/0xaa0 tcp_sendmsg_locked+0x1840/0x4140 tcp_sendmsg+0x37/0x60 inet_sendmsg+0x18c/0x490 sock_sendmsg+0xae/0x130 smb_send_kvec+0x29c/0x520 __smb_send_rqst+0x3ef/0xc60 smb_send_rqst+0x25a/0x2e0 compound_send_recv+0x9e8/0x2af0 cifs_send_recv+0x24/0x30 SMB2_open+0x35e/0x1620 open_shroot+0x27b/0x490 smb2_open_op_close+0x4e1/0x590 smb2_query_path_info+0x2ac/0x650 cifs_get_inode_info+0x1058/0x28f0 cifs_root_iget+0x3bb/0xf80 cifs_smb3_do_mount+0xe00/0x14c0 cifs_do_mount+0x15/0x20 mount_fs+0x5e/0x290 vfs_kern_mount+0x88/0x460 do_mount+0x398/0x31e0 ksys_mount+0xc6/0x150 __x64_sys_mount+0xea/0x190 do_syscall_64+0x122/0x590 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It can be reproduced by the following step: 1. samba configured with: server max protocol = SMB2_10 2. mount -o vers=default When parse the mount version parameter, the 'ops' and 'vals' was setted to smb30, if negotiate result is smb21, just update the 'ops' to smb21, but the 'vals' is still smb30. When add lease context, the iov_base is allocated with smb21 ops, but the iov_len is initiallited with the smb30. Because the iov_len is longer than iov_base, when send the message, copy array out of bounds. we need to keep the 'ops' and 'vals' consistent. Fixes: 9764c02fcbad ("SMB3: Add support for multidialect negotiate (SMB2.1 and later)") Fixes: d5c7076b772a ("smb3: add smb3.1.1 to default dialect list") Signed-off-by: ZhangXiaoxu <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2019-04-16cifs: Fix use-after-free in SMB2_readZhangXiaoxu1-2/+2
There is a KASAN use-after-free: BUG: KASAN: use-after-free in SMB2_read+0x1136/0x1190 Read of size 8 at addr ffff8880b4e45e50 by task ln/1009 Should not release the 'req' because it will use in the trace. Fixes: eccb4422cf97 ("smb3: Add ftrace tracepoints for improved SMB3 debugging") Signed-off-by: ZhangXiaoxu <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]> 4.18+ Reviewed-by: Pavel Shilovsky <[email protected]>
2019-04-16cifs: Fix use-after-free in SMB2_writeZhangXiaoxu1-1/+1
There is a KASAN use-after-free: BUG: KASAN: use-after-free in SMB2_write+0x1342/0x1580 Read of size 8 at addr ffff8880b6a8e450 by task ln/4196 Should not release the 'req' because it will use in the trace. Fixes: eccb4422cf97 ("smb3: Add ftrace tracepoints for improved SMB3 debugging") Signed-off-by: ZhangXiaoxu <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]> 4.18+ Reviewed-by: Pavel Shilovsky <[email protected]>
2019-04-16perf evsel: Use hweight64() instead of hweight_long(attr.sample_regs_user)Mao Han1-6/+6
On 32-bits platform with more than 32 registers, the 64 bits mask is truncate to the lower 32 bits and the return value of hweight_long will always smaller than 32. When kernel outputs more than 32 registers, but the user perf program only counts 32, there will be a data mismatch result to overflow check fail. Signed-off-by: Mao Han <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Fixes: 6a21c0b5c2ab ("perf tools: Add core support for sampling intr machine state regs") Fixes: d03f2170546d ("perf tools: Expand perf_event__synthesize_sample()") Fixes: 0f6a30150ca2 ("perf tools: Support user regs and stack in sample parsing") Link: http://lkml.kernel.org/r/29ad7947dc8fd1ff0abd2093a72cc27a2446be9f.1554883878.git.han_mao@c-sky.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-16tools lib traceevent: Fix missing equality check for strcmpRikard Falkeborn1-1/+1
There was a missing comparison with 0 when checking if type is "s64" or "u64". Therefore, the body of the if-statement was entered if "type" was "u64" or not "s64", which made the first strcmp() redundant since if type is "u64", it's not "s64". If type is "s64", the body of the if-statement is not entered but since the remainder of the function consists of if-statements which will not be entered if type is "s64", we will just return "val", which is correct, albeit at the cost of a few more calls to strcmp(), i.e., it will behave just as if the if-statement was entered. If type is neither "s64" or "u64", the body of the if-statement will be entered incorrectly and "val" returned. This means that any type that is checked after "s64" and "u64" is handled the same way as "s64" and "u64", i.e., the limiting of "val" to fit in for example "s8" is never reached. This was introduced in the kernel tree when the sources were copied from trace-cmd in commit f7d82350e597 ("tools/events: Add files to create libtraceevent.a"), and in the trace-cmd repo in 1cdbae6035cei ("Implement typecasting in parser") when the function was introduced, i.e., it has always behaved the wrong way. Detected by cppcheck. Signed-off-by: Rikard Falkeborn <[email protected]> Reviewed-by: Steven Rostedt (VMware) <[email protected]> Cc: Tzvetomir Stoyanov <[email protected]> Fixes: f7d82350e597 ("tools/events: Add files to create libtraceevent.a") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-16perf stat: Disable DIR_FORMAT feature for 'perf stat record'Jiri Olsa1-0/+1
Arnaldo reported assertion in perf stat record: assertion failed at util/header.c:875 There's no support for this in the 'perf state record' command, disable the feature for that case. Reported-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Fixes: 258031c017c3 ("perf header: Add DIR_FORMAT feature to describe directory data") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-16perf scripts python: export-to-sqlite.py: Fix use of parent_id in calls_viewAdrian Hunter1-1/+1
Fix following error using calls_view: Query failed: ambiguous column name: parent_id Unable to execute statement Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Fixes: 8ce9a7251d11 ("perf scripts python: export-to-sqlite.py: Export calls parent_id") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-16perf header: Fix lock/unlock imbalances when processing BPF/BTF infoGustavo A. R. Silva1-9/+13
Fix lock/unlock imbalances by refactoring the code a bit and adding calls to up_write() before return. Signed-off-by: Gustavo A. R. Silva <[email protected]> Acked-by: Song Liu <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Addresses-Coverity-ID: 1444315 ("Missing unlock") Addresses-Coverity-ID: 1444316 ("Missing unlock") Fixes: a70a1123174a ("perf bpf: Save BTF information as headers to perf.data") Fixes: 606f972b1361 ("perf bpf: Save bpf_prog_info information as headers to perf.data") Link: http://lkml.kernel.org/r/20190408173355.GA10501@embeddedor [ Simplified the exit path to have just one up_write() + return ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-04-16Merge tag 'timers-v5.1-rc6' of ↵Thomas Gleixner4-33/+3
https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull clockevent/clocksource fixes from Daniel Lezcano: - Fix TIMER_OF missing option dependency for npcm (Arnd Bergmann) - Remove a pointless macro call for arm_arch_timer (Yangtao Li) - Fix wrong compatible string for oxnas (Neil Armstrong) - Fix compilation warning by removing a dead function on omap (Nathan Chancellor)
2019-04-16ALSA: info: Fix racy addition/deletion of nodesTakashi Iwai1-2/+10
The ALSA proc helper manages the child nodes in a linked list, but its addition and deletion is done without any lock. This leads to a corruption if they are operated concurrently. Usually this isn't a problem because the proc entries are added sequentially in the driver probe procedure itself. But the card registrations are done often asynchronously, and the crash could be actually reproduced with syzkaller. This patch papers over it by protecting the link addition and deletion with the parent's mutex. There is "access" mutex that is used for the file access, and this can be reused for this purpose as well. Reported-by: [email protected] Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.