aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-03-20MIPS: Make local_irq_disable macro safe for non-Mipsr2Jim Quinlan1-0/+11
For non-mipsr2 processors, the local_irq_disable contains an mfc0-mtc0 pair with instructions inbetween. With preemption enabled, this sequence may get preempted and effect a stale value of CP0_STATUS when executing the mtc0 instruction. This commit avoids this scenario by incrementing the preempt count before the mfc0 and decrementing it after the mtc9. [[email protected]: This patch is sorting out the part that were missed by e97c5b6098 [MIPS: Make irqflags.h functions preempt-safe for non-mipsr2 cpus.] I also re-enabled the inclusion of <asm/asm-offsets.h> at the top of <asm/asmmacro.h>]. Signed-off-by: Jim Quinlan <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6164/ Signed-off-by: Ralf Baechle <[email protected]>
2014-03-20ASoC: cs42xx8: Add codec driver support for CS42448/CS42888Nicolin Chen6-0/+946
This patch adds support for the Cirrus Logic CS42448/CS42888 Audio CODEC that has six/four 24-bit AD and eight 24-bit DA converters. [ CS42448/CS42888 supports both I2C and SPI control ports. As initial patch, this patch only adds the support for I2C. ] Signed-off-by: Nicolin Chen <[email protected]> Acked-by: Brian Austin <[email protected]> Acked-by: Paul Handrigan <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2014-03-20ALSA: hda - verify pin:cvt connection on preparing a stream for Intel HDMI codecMengdong Lin1-0/+32
This is a temporary fix for some Intel HDMI codecs to avoid no sound output for a resuming playback after S3. After S3, the audio driver restores pin:cvt connection selections by snd_hda_codec_resume_cache(). However this can happen before the gfx side is ready and such connect selection is overlooked by HW. After gfx is ready, the pins make the default selection again. And this will cause multiple pins share a same convertor and mute control will affect each other. Thus a resumed audio playback become silent after S3. This patch verifies pin:cvt connection on preparing a stream, to assure the pin selects the right convetor and an assigned convertor is not shared by other unused pins. Apply this fix-up on Haswell, Broadwell and Valleyview (Baytrail). We need this temporary fix before a reliable software communication channel is established between audio and gfx, to sync audio/gfx operations. Signed-off-by: Mengdong Lin <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2014-03-20Merge branch 'exynos-drm-fixes' of ↵Dave Airlie1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Just fixed resource release issue at open fail. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: Fix (more) freeing issues in exynos_drm_drv.c
2014-03-20drm/exynos: Fix (more) freeing issues in exynos_drm_drv.cDaniel Kurtz1-3/+7
The following commit [0] fixed a use-after-free, but left the subdrv open in the error path. [0] commit 6ca605f7c70895a35737435f17ae9cc5e36f1466 drm/exynos: Fix freeing issues in exynos_drm_drv.c Signed-off-by: Daniel Kurtz <[email protected]> Acked-by: Sachin Kamat <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2014-03-19mm: fix bad rss-counter if remap_file_pages raced migrationHugh Dickins1-6/+22
Fix some "Bad rss-counter state" reports on exit, arising from the interaction between page migration and remap_file_pages(): zap_pte() must count a migration entry when zapping it. And yes, it is possible (though very unusual) to find an anon page or swap entry in a VM_SHARED nonlinear mapping: coming from that horrid get_user_pages(write, force) case which COWs even in a shared mapping. Signed-off-by: Hugh Dickins <[email protected]> Tested-by: Sasha Levin [email protected]> Tested-by: Dave Jones [email protected]> Cc: Cyrill Gorcunov <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-03-19Merge tag 'pci-v3.14-fixes-3' of ↵Linus Torvalds1-19/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI resource management fix from Bjorn Helgaas: "This is a fix for an AGP regression exposed by e501b3d87f00 ("agp: Support 64-bit APBASE"), which we merged in v3.14-rc1. We've warned about the conflict between the GART and PCI resources and cleared out the PCI resource for a long time, but after e501b3d87f00, we still *use* that cleared-out PCI resource. I think the GART resource is incorrect, so this patch removes it" * tag 'pci-v3.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "[PATCH] Insert GART region into resource map"
2014-03-19Merge branch 'for-3.14-fixes' of ↵Linus Torvalds1-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fix from Tejun Heo: "One really late cgroup patch to fix error path in create_css(). Hitting this bug would be pretty rare but still possible and it gets delayed we'd need to backport it through -stable anyway. It only updates error path in create_css() and has low chance of new breakages" * 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: fix a failure path in create_css()
2014-03-19ASoC: tegra: Use flat regcacheDylan Reid6-7/+7
When using an rbtree cache, there can be allocations the first time a register is accessed. This can cause an attempt to schedule while atomic in the case that the regmap is using a spinlock. This could be fixed by either initializing all the registers or using a flat cache. The register maps for tegra30_ahub and tegra30_i2s are dense and don't save much from using a tree so convert them to flat. Tegra30 changes tested on Norrin, Tegra20 changes compile. Signed-off-by: Dylan Reid <[email protected]> Tested-by: Stephen Warren <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2014-03-19MIPS: Octeon: Fix warning in of_device_alloc on cn3xxxAndreas Herrmann1-10/+12
Starting with commit 3da5278727a895d49a601f67fd49dffa0b80f9a5 (of/irq: Rework of_irq_count()) the following warning is triggered on octeon cn3xxx: [ 0.887281] WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x228/0x230() [ 0.895642] Modules linked in: [ 0.898689] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc7-00012-g9ae51f2-dirty #41 [ 0.906860] Stack : c8b439581166d96e ffffffff816b0000 0000000040808000 ffffffff81185ddc [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 000000000000000b [ 0.906860] 000000000000000a 000000000000000a 0000000000000000 0000000000000000 [ 0.906860] ffffffff81740000 ffffffff81720000 ffffffff81615900 ffffffff816b0177 [ 0.906860] ffffffff81727d10 800000041f868fb0 0000000000000001 0000000000000000 [ 0.906860] 0000000000000000 0000000000000038 0000000000000001 ffffffff81568484 [ 0.906860] 800000041f86faa8 ffffffff81145ddc 0000000000000000 ffffffff811873f4 [ 0.906860] 800000041f868b88 800000041f86f9c0 0000000000000000 ffffffff81569c9c [ 0.906860] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.906860] 0000000000000000 ffffffff811205e0 0000000000000000 0000000000000000 [ 0.906860] ... [ 0.971695] Call Trace: [ 0.974139] [<ffffffff811205e0>] show_stack+0x68/0x80 [ 0.979183] [<ffffffff81569c9c>] dump_stack+0x8c/0xe0 [ 0.984196] [<ffffffff81145efc>] warn_slowpath_common+0x84/0xb8 [ 0.990110] [<ffffffff81436888>] of_device_alloc+0x228/0x230 [ 0.995726] [<ffffffff814368d8>] of_platform_device_create_pdata+0x48/0xd0 [ 1.002593] [<ffffffff81436a94>] of_platform_bus_create+0x134/0x1e8 [ 1.008837] [<ffffffff81436af8>] of_platform_bus_create+0x198/0x1e8 [ 1.015064] [<ffffffff81436cc4>] of_platform_bus_probe+0xa4/0x100 [ 1.021149] [<ffffffff81100570>] do_one_initcall+0xd8/0x128 [ 1.026701] [<ffffffff816e2a10>] kernel_init_freeable+0x144/0x210 [ 1.032753] [<ffffffff81564bc4>] kernel_init+0x14/0x110 [ 1.037973] [<ffffffff8111bb44>] ret_from_kernel_thread+0x14/0x1c With this commit the kernel starts mapping the interrupts listed for gpio-controller node. irq_domain_ops for CIU (octeon_irq_ciu_map and octeon_irq_ciu_xlat) refuse to handle the GPIO lines (returning -EINVAL) and this is causing above warning in of_device_alloc(). Modify irq_domain_ops for CIU and CIU2 to "gracefully handle" GPIO lines (neither return error code nor call octeon_irq_set_ciu_mapping for it). This should avoid the warning. (As before the real setup for GPIO lines will happen using irq_domain_ops of gpio-controller.) This patch is based on Wei's patch v2 (see http://marc.info/?l=linux-mips&m=139511814813247). Signed-off-by: Andreas Herrmann <[email protected]> Reported-by: Yang Wei <[email protected]> Acked-by: David Daney <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6624/ Signed-off-by: Ralf Baechle <[email protected]>
2014-03-19MIPS: ftrace: Tweak safe_load()/safe_store() macrosViller Hsiao1-10/+10
Due to name collision in ftrace safe_load and safe_store macros, these macros cannot take expressions as operands. For example, compiler will complain for a macro call like the following: safe_store_code(new_code2, ip + 4, faulted); arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/kernel/ftrace.c:118:32: error: undefined named operand 'ip + 4' safe_store_code(new_code2, ip + 4, faulted); ^ arch/mips/include/asm/ftrace.h:61:6: note: in definition of macro 'safe_store' : [dst] "r" (dst), [src] "r" (src)\ ^ arch/mips/kernel/ftrace.c:118:2: note: in expansion of macro 'safe_store_code' safe_store_code(new_code2, ip + 4, faulted); ^ This build error is triggered by a4671094 [MIPS: ftrace: Fix icache flush range error]. Tweak variable naming in those macros to allow flexible operands. Signed-off-by: Viller Hsiao <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6622/ Signed-off-by: Ralf Baechle <[email protected]>
2014-03-20Merge tag 'drm-intel-fixes-2014-03-19' of ↵Dave Airlie3-1/+17
git://anongit.freedesktop.org/drm-intel into drm-fixes two more fixes, both regressions. * tag 'drm-intel-fixes-2014-03-19' of git://anongit.freedesktop.org/drm-intel: drm/i915: Disable stolen memory when DMAR is active Revert "drm/i915: don't touch the VDD when disabling the panel"
2014-03-19via-rhine: Disable device in error pathRoger Luethi1-3/+5
Currently, via-rhine fails to call pci_disable_device() for errors in rhine_init_one(). Reported-by: Huqiu Liu <[email protected]> Signed-off-by: Roger Luethi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-03-19ASoC: cs42l51: Fix SOC_DOUBLE_R_SX_TLV shift values for ADC, PCM, and Analog ↵Brian Austin1-5/+4
kcontrols The shift values for the ADC,PCM, and Analog kcontrols were wrong causing wrong values for the SOC_DOUBLE_R_SX_TLV macros Fixed the TLV for aout_tlv to show -102dB correctly Fixes: 1d99f2436d (ASoC: core: Rework SOC_DOUBLE_R_SX_TLV add SOC_SINGLE_SX_TLV) Reported-by: Thomas Petazzoni <[email protected]> Signed-off-by: Brian Austin <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2014-03-19Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single bugfix: make the scheduler clock on Vybrid SoCs count forward" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: vf_pit_timer: use complement for sched_clock reading
2014-03-19ALSA: compress: Pass through return value of open ops callbackCharles Keepax1-1/+1
The snd_compr_open function would always return 0 even if the compressed ops open function failed, obviously this is incorrect. Looks like this was introduced by a small typo in: commit a0830dbd4e42b38aefdf3fb61ba5019a1a99ea85 ALSA: Add a reference counter to card instance This patch returns the value from the compressed op as it should. Signed-off-by: Charles Keepax <[email protected]> Acked-by: Vinod Koul <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2014-03-19ASoC: io: Remove support for ASoC cache in conjunction with regmapMark Brown1-31/+4
Since all regmap CODECs should be (and are) using the more advance regmap cache infrastructure remove the code which supports that and just proxy I/O straight through to regmap. Signed-off-by: Mark Brown <[email protected]>
2014-03-19ASoC: Add helper function to cast component back to CODECLars-Peter Clausen1-0/+13
Add a helper function to cast back from a component struct to the CODEC struct it is embedded in. This is useful in situations where we know that a certain component is a CODEC and want to get access to some CODEC specific properties. Signed-off-by: Lars-Peter Clausen <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2014-03-19MIPS: BCM47XX: Check all (32) GPIOs when looking for a pinRafał Miłecki1-1/+1
Broadcom boards support 32 GPIOs and NVRAM may have entires for higher ones too. Example: gpio23=wombo_reset Signed-off-by: Rafa? Mi?ecki <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Cc: [email protected] Cc: Rafał Miłecki <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/6547/ Signed-off-by: Ralf Baechle <[email protected]>
2014-03-19drm/i915: Disable stolen memory when DMAR is activeChris Wilson1-0/+7
We have reports of heavy screen corruption if we try to use the stolen memory reserved by the BIOS whilst the DMA-Remapper is active. This quirk may be only specific to a few machines or BIOSes, but first lets apply the big hammer and always disable use of stolen memory when DMAR is active. v2 by Jani: Rebase on -fixes, only look at intel_iommu_gfx_mapped. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68535 Signed-off-by: Chris Wilson <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Cc: [email protected] Signed-off-by: Jani Nikula <[email protected]>
2014-03-19Revert "drm/i915: don't touch the VDD when disabling the panel"Jani Nikula2-1/+10
This reverts commit dff392dbd258381a6c3164f38420593f2d291e3b Author: Paulo Zanoni <[email protected]> Date: Fri Dec 6 17:32:41 2013 -0200 drm/i915: don't touch the VDD when disabling the panel which didn't take into account commit 6cb49835da0426f69a2931bc2a0a8156344b0e41 Author: Daniel Vetter <[email protected]> Date: Sun May 20 17:14:50 2012 +0200 drm/i915: enable vdd when switching off the eDP panel and commit 35a38556d900b9cb5dfa2529c93944b847f8a8a4 Author: Daniel Vetter <[email protected]> Date: Sun Aug 12 22:17:14 2012 +0200 drm/i915: reorder edp disabling to fix ivb MacBook Air Unsurprisingly, various MacBooks failed. Effectively the same has already been done in drm-intel-next-queued. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74628 Tested-by: Patrik Jakobsson <[email protected]> Cc: Paulo Zanoni <[email protected]> Acked-by: Daniel Vetter <[email protected]> Signed-off-by: Jani Nikula <[email protected]>
2014-03-18ASoC: simple-card: overwrite cpu_dai->fmt with codec_dai->fmtNicolin Chen2-6/+20
The current simple-card driver separates the daimft for cpu_dai and codec_dai. So we might get different values for them (0x4003 and 0x1003 for example): asoc-simple-card sound-cs42888.12: cpu : 2024000.esai / 4003 / 132000000 asoc-simple-card sound-cs42888.12: codec : cs42888 / 1003 / 24576000 asoc-simple-card sound-cs42888.12: cs42888 <-> 2024000.esai mapping ok This is not allowed at all as we need to keep the DAIFMT settings identical for both the ends of the link. Thus this patch fixes it by overwriting the cpu_dai->fmt with codec_dai->fmt since we defined the DAIFMT_MASTER basing on CODEC at the first place while the other bits are same. Signed-off-by: Nicolin Chen <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2014-03-18cgroup: fix a failure path in create_css()Li Zefan1-4/+7
If online_css() fails, we should remove cgroup files belonging to css->ss. Signed-off-by: Li Zefan <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2014-03-18Revert "[PATCH] Insert GART region into resource map"Bjorn Helgaas1-19/+1
This reverts commit 56dd669a138c, which makes the GART visible in /proc/iomem. This fixes a regression: e501b3d87f00 ("agp: Support 64-bit APBASE") exposed an existing problem with a conflict between the GART region and a PCI BAR region. The GART addresses are bus addresses, not CPU addresses, and therefore should not be inserted in iomem_resource. On many machines, the GART region is addressable by the CPU as well as by an AGP master, but CPU addressability is not required by the spec. On some of these machines, the GART is mapped by a PCI BAR, and in that case, the PCI core automatically inserts it into iomem_resource, just as it does for all BARs. Inserting it here means we'll have a conflict if the PCI core later tries to claim the GART region, so let's drop the insertion here. The conflict indirectly causes X failures, as reported by Jouni in the bugzilla below. We detected the conflict even before e501b3d87f00, but after it the AGP code (fix_northbridge()) uses the PCI resource (which is zeroed because of the conflict) instead of reading the BAR again. Conflicts: arch/x86_64/kernel/aperture.c Fixes: e501b3d87f00 agp: Support 64-bit APBASE Link: https://bugzilla.kernel.org/show_bug.cgi?id=72201 Reported-and-tested-by: Jouni Mettälä <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2014-03-18ATHEROS-ATL1E: Convert iounmap to pci_iounmapPeter Senna Tschudin1-2/+2
Use pci_iounmap instead of iounmap when the virtual mapping was done with pci_iomap. A simplified version of the semantic patch that finds this issue is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression addr; @@ addr = pci_iomap(...) @rr@ expression r.addr; @@ * iounmap(addr) // </smpl> Signed-off-by: Peter Senna Tschudin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-03-18vxlan: fix potential NULL dereference in arp_reduce()David Stevens1-0/+3
This patch fixes a NULL pointer dereference in the event of an skb allocation failure in arp_reduce(). Signed-Off-By: David L Stevens <[email protected]> Acked-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-03-18Merge branch 'cnic-net'David S. Miller8-122/+138
Michael Chan says: ==================== cnic bug fixes for net-next Michael Chan (3): cnic: Use proper ulp_ops for per device operations. cnic,bnx2i,bnx2fc: Fix inconsistent use of page size cnic: Update version to 2.5.20 and copyright year. ==================== Signed-off-by: David S. Miller <[email protected]>
2014-03-18cnic: Update version to 2.5.20 and copyright year.Michael Chan4-6/+6
Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-03-18cnic,bnx2i,bnx2fc: Fix inconsistent use of page sizeMichael Chan6-114/+129
The bnx2/bnx2x rings are made up of linked pages. However there is an upper limit on the page size as some the page size settings are 16-bit in the hardware/firmware interface. In the current code, some parts use BNX2_PAGE_SIZE which has a 16K upper limit and some parts use PAGE_SIZE. On archs with >= 64K PAGE_SIZE, it generates some compile warnings. Define a new CNIC_PAGE_SZIE which has an upper limit of 16K and use it consistently in all relevant parts. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: Eddie Wai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-03-18cnic: Use proper ulp_ops for per device operations.Michael Chan1-2/+3
For per device operations, cnic needs to dereference the RCU protected cp->ulp_ops instead of the global cnic_ulp_tbl. In 2 locations, cnic_send_nlmsg() and cnic_copy_ulp_stats(), it was referencing the global table. If the device has been unregistered and these functions are still being called (very unlikely scenarios), it could lead to NULL pointer dereference. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-03-18ASoC: cs42l52: Fix mask bits for SOC_VALUE_ENUM_SINGLEBrian Austin1-4/+4
The mask bits values were wrong for the SOC_VALUE_ENUM_SINGLE for the PCM/ADC Swap controls Reported-by: Takashi Iwai <[email protected]> Signed-off-by: Brian Austin <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2014-03-18ASoC: cs42l73: Fix mask bits for SOC_VALUE_ENUM_SINGLEBrian Austin1-3/+3
The mask bits values were wrong for the SOC_VALUE_ENUM_SINGLE for the mono mix controls. Reported-by: Takashi Iwai <[email protected]> Signed-off-by: Brian Austin <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2014-03-18net: cdc_ncm: fix control message orderingBjørn Mork2-25/+24
This is a context modified revert of commit 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field") which introduced a NCM specification violation, causing setup errors for some devices. These errors resulted in the device and host disagreeing about shared settings, with complete failure to communicate as the end result. The NCM specification require that many of the NCM specific control reuests are sent only while the NCM Data Interface is in alternate setting 0. Reverting the commit ensures that we follow this requirement. Fixes: 6a9612e2cb22 ("net: cdc_ncm: remove ncm_parm field") Reported-and-tested-by: Pasi Kärkkäinen <[email protected]> Reported-by: Thomas Schäfer <[email protected]> Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-03-18ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properlylucien1-8/+6
In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as transport),the ipsec header need to be added in the first fragment, so the mtu will decrease to reserve space for it, then the second fragment come, the mtu should be turn back, as the commit 0c1833797a5a6ec23ea9261d979aa18078720b74 said. however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use *mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway equal with the first fragment's. and cannot turn back. when I test through ping6 -c1 -s5000 $ip (mtu=1280): ...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232 ...frag (1232|1216) ...frag (2448|1216) ...frag (3664|1216) ...frag (4880|164) which should be: ...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232 ...frag (1232|1232) ...frag (2464|1232) ...frag (3696|1232) ...frag (4928|116) so delete the min() when change back the mtu. Signed-off-by: Xin Long <[email protected]> Fixes: 75a493e60ac4bb ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size") Acked-by: Hannes Frederic Sowa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-03-18isdn/capi: Make Middleware depend on CAPI2.0Paul Bolle1-9/+9
The Kconfig symbol ISDN_CAPI_MIDDLEWARE is only used in capi.c. Setting it without setting ISDN_CAPI_CAPI20 is therefor useless. Make it depend on ISDN_CAPI_CAPI20 and put its entry after ISDN_CAPI_CAPI20's entry. Signed-off-by: Paul Bolle <[email protected]> Signed-off-by: Tilman Schmidt <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-03-18ASoC: add S/PDIF support to Armada 370 DB ASoC driverThomas Petazzoni3-3/+35
The Armada 370 DB board not only has analog audio input/output, but also S/PDIF input/output. This commit adds support for S/PDIF in the ASoC machine driver of the Armada 370 DB platform, and adjusts the Device Tree bindings documentation accordingly. Signed-off-by: Thomas Petazzoni <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2014-03-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-69/+2
Pull another kvm fix from Paolo Bonzini: "A fix for a PowerPC bug that was introduced during the 3.14 merge window" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix register usage when loading/saving VRSAVE KVM: PPC: Book3S HV: Remove bogus duplicate code
2014-03-18Merge branch 'master' of ↵David S. Miller11-44/+66
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== 1) Fix a sleep in atomic when pfkey_sadb2xfrm_user_sec_ctx() is called from pfkey_compile_policy(). Fix from Nikolay Aleksandrov. 2) security_xfrm_policy_alloc() can be called in process and atomic context. Add an argument to let the callers choose the appropriate way. Fix from Nikolay Aleksandrov. ==================== Signed-off-by: David S. Miller <[email protected]>
2014-03-18ASoC: codecs: Replace instances of rtd->codec with dai->codecLars-Peter Clausen8-19/+10
With CODEC to CODEC links rtd->codec does not necessarily point to the driver's CODEC. CODEC drivers should always use dai->codec and never even look at the PCM runtime. Signed-off-by: Lars-Peter Clausen <[email protected]> Acked-by: Charles Keepax <[email protected]> Acked-by: Jyri Sarha <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2014-03-18ASoC: tlv320aic31xx: Don't call kfree for memory allocated by devm_kzallocAxel Lin1-8/+3
The kfree call is not necessary, but we need to call snd_soc_unregister_codec() in remove(). Signed-off-by: Axel Lin <[email protected]> Acked-by: Jyri Sarha <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2014-03-18Merge branch 'topic/alc28x' into for-nextTakashi Iwai1-0/+77
2014-03-18ALSA: hda/realtek - Restore default value for ALC282Kailang Yang1-0/+77
Restore the registers to prevent the abnormal digital power supply rising ratio/sequence to the codec and causing the incorrect default codec register restoration during initialization. Signed-off-by: Kailang Yang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2014-03-18ALSA: oxygen: Xonar DG(X): fix Stereo Upmixing regressionClemens Ladisch1-6/+24
The code introduced in commit 1f91ecc14dee ("ALSA: oxygen: modify adjust_dg_dac_routing function") accidentally disregarded the old value of the playback routing register, so it broke the "Stereo Upmixing" mixer control. The unmuted parts of the channel routing are the same for all settings of the output destination, so it suffices to revert that part of the patch. Fixes: 1f91ecc14dee ('ALSA: oxygen: modify adjust_dg_dac_routing function') Tested-by: Roman Volkov <[email protected]> Signed-off-by: Clemens Ladisch <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2014-03-18Merge branch 'topic/alc28x' into for-nextTakashi Iwai1-0/+177
2014-03-18ALSA: hda/realtek - Fix the noise after suspend and resume on ALC282 codecKailang Yang1-0/+73
When the power state of ALC283 codec goes to D3 or return back to D0, it gives a noise via headphone output. To follow the depop procedure, it will be better. Signed-off-by: Kailang Yang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2014-03-18Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull two 'perf bench' fixes from Arnaldo: * Make 'perf bench mem' (i.e. no args) mean 'run all tests' so that we can run all tests, not stopping at the numa ones. (Arnaldo Carvalho de Melo) * Fix NULL pointer dereference after last test in in "perf bench all" (Patrick Palka) Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2014-03-18MIPS: Fix possible build error with transparent hugepages enabledAlex Smith1-6/+6
If CONFIG_TRANSPARENT_HUGEPAGE is enabled, but CONFIG_HUGETLB_PAGE is not, it is possible to end up with a configuration that fails to build with the following error: include/linux/huge_mm.h:125:2: error: #error "hugepages can't be allocated by the buddy allocator" This is due to CONFIG_FORCE_MAX_ZONEORDER defaulting to 11. It already has ranges that change the valid values when HUGETLB_PAGE is enabled, but this is not done for TRANSPARENT_HUGEPAGE. Fix by changing the HUGETLB_PAGE dependencies to MIPS_HUGE_TLB_SUPPORT, which includes both TRANSPARENT_HUGEPAGE and HUGETLB_PAGE. Signed-off-by: Alex Smith <[email protected]> Reviewed-by: Markos Chandras <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/6391/ Signed-off-by: Ralf Baechle <[email protected]>
2014-03-18ALSA: hda/realtek - Restore default value for ALC283Kailang Yang1-0/+85
Restore the registers to prevent the abnormal digital power supply rising ratio/sequence to the codec and causing the incorrect default codec register restoration during initialization. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=71861 Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2014-03-18drm: Fix use-after-free in the shadow-attache exit codeDaniel Vetter1-1/+1
This regression has been introduced in commit b3f2333de8e81b089262b26d52272911523e605f Author: Daniel Vetter <[email protected]> Date: Wed Dec 11 11:34:31 2013 +0100 drm: restrict the device list for shadow attached drivers Reported-by: Dave Jones <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Reviewed-by: David Herrmann <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2014-03-18Merge tag 'drm-intel-fixes-2014-03-17' of ↵Dave Airlie2-31/+42
git://anongit.freedesktop.org/drm-intel into drm-fixes Two 3.14 specific fixes, two cc: stable. * tag 'drm-intel-fixes-2014-03-17' of git://anongit.freedesktop.org/drm-intel: drm/i915: Don't enable display error interrupts from the start drm/i915: Fix scanline counter fixup on BDW drm/i915: Add a workaround for HSW scanline counter weirdness drm/i915: Fix PSR programming
Powered by cgit, Gruvboxed by Blaster4385.