| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The test_insert_dup() function from lib/test_rhashtable.c passes a
pointer to a stack object to rhltable_init(). Allocate the hash table
dynamically to avoid that the following is reported with object
debugging enabled:
ODEBUG: object (ptrval) is on stack (ptrval), but NOT annotated.
WARNING: CPU: 0 PID: 1 at lib/debugobjects.c:368 __debug_object_init+0x312/0x480
Modules linked in:
EIP: __debug_object_init+0x312/0x480
Call Trace:
? debug_object_init+0x1a/0x20
? __init_work+0x16/0x30
? rhashtable_init+0x1e1/0x460
? sched_clock_cpu+0x57/0xe0
? rhltable_init+0xb/0x20
? test_insert_dup+0x32/0x20f
? trace_hardirqs_on+0x38/0xf0
? ida_dump+0x10/0x10
? jhash+0x130/0x130
? my_hashfn+0x30/0x30
? test_rht_init+0x6aa/0xab4
? ida_dump+0x10/0x10
? test_rhltable+0xc5c/0xc5c
? do_one_initcall+0x67/0x28e
? trace_hardirqs_off+0x22/0xe0
? restore_all_kernel+0xf/0x70
? trace_hardirqs_on_thunk+0xc/0x10
? restore_all_kernel+0xf/0x70
? kernel_init_freeable+0x142/0x213
? rest_init+0x230/0x230
? kernel_init+0x10/0x110
? schedule_tail_wrapper+0x9/0xc
? ret_from_fork+0x19/0x24
Cc: Thomas Graf <[email protected]>
Cc: Herbert Xu <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Bart Van Assche <[email protected]>
Acked-by: Herbert Xu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The size of L2TPv2 header with all optional fields is 14 bytes.
l2tp_udp_recv_core only moves 10 bytes to the linear part of a
skb. This may lead to l2tp_recv_common read data outside of a skb.
This patch make sure that there is at least 14 bytes in the linear
part of a skb to meet the maximum need of l2tp_udp_recv_core and
l2tp_recv_common. The minimum size of both PPP HDLC-like frame and
Ethernet frame is larger than 14 bytes, so we are safe to do so.
Also remove L2TP_HDR_SIZE_NOSEQ, it is unused now.
Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Suggested-by: Guillaume Nault <[email protected]>
Signed-off-by: Jacob Wen <[email protected]>
Acked-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
WCN3990 is SNOC, not PCI. This prevents probing WCN3990.
Fixes: 367c899f622c ("ath10k: add bus type check in ath10k_init_hw_params")
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
Report correct eeprom per channel power value.
Fix chan_vs_power map in mt76x0_get_power_info routine
Fixes: f2a2e819d672 ("mt76x0: remove eeprom dependency from mt76x0_get_power_info")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
The are a couple of statments that are one level too deep, fix this by
removing tabs.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Stefan Schmidt <[email protected]>
|
|
Jose Abreu says:
====================
net: stmmac: Misc fixes
Some misc fixes for stmmac targeting -net.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
In stmmac xmit callback we use a different flow for TSO packets but TSO
xmit callback is not disabling the EEE mode.
Fix this by disabling earlier the EEE mode, i.e. before calling the TSO
xmit callback.
Signed-off-by: Jose Abreu <[email protected]>
Cc: Joao Pinto <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The number of TSO enabled channels in HW can be different than the
number of total channels. There is no way to determined, at runtime, the
number of TSO capable channels and its safe to assume that if TSO is
enabled then at least channel 0 will be TSO capable.
Lets always send TSO packets from Queue 0.
Signed-off-by: Jose Abreu <[email protected]>
Cc: Joao Pinto <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If we don't have DT then stmmac_clk will not be available. Let's add a
new Platform Data field so that we can specify the refclk by this mean.
This way we can still use the coalesce command in PCI based setups.
Signed-off-by: Jose Abreu <[email protected]>
Cc: Joao Pinto <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin,
I ran into the issue that while l3 mode is working fine, l3s mode
does not have any connectivity to kube-apiserver and hence all pods
end up in Error state as well. The ipvlan master device sits on
top of a bond device and hostns traffic to kube-apiserver (also running
in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573
where the latter is the address of the bond0. While in l3 mode, a
curl to https://10.152.183.1:443 or to https://139.178.29.207:37573
works fine from hostns, neither of them do in case of l3s. In the
latter only a curl to https://127.0.0.1:37573 appeared to work where
for local addresses of bond0 I saw kernel suddenly starting to emit
ARP requests to query HW address of bond0 which remained unanswered
and neighbor entries in INCOMPLETE state. These ARP requests only
happen while in l3s.
Debugging this further, I found the issue is that l3s mode is piggy-
backing on l3 master device, and in this case local routes are using
l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit
f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev
if relevant") and 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be
a loopback"). I found that reverting them back into using the
net->loopback_dev fixed ipvlan l3s connectivity and got everything
working for the CNI.
Now judging from 4fbae7d83c98 ("ipvlan: Introduce l3s mode") and the
l3mdev paper in [0] the only sole reason why ipvlan l3s is relying
on l3 master device is to get the l3mdev_ip_rcv() receive hook for
setting the dst entry of the input route without adding its own
ipvlan specific hacks into the receive path, however, any l3 domain
semantics beyond just that are breaking l3s operation. Note that
ipvlan also has the ability to dynamically switch its internal
operation from l3 to l3s for all ports via ipvlan_set_port_mode()
at runtime. In any case, l3 vs l3s soley distinguishes itself by
'de-confusing' netfilter through switching skb->dev to ipvlan slave
device late in NF_INET_LOCAL_IN before handing the skb to L4.
Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which,
if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook
without any additional l3mdev semantics on top. This should also have
minimal impact since dev->priv_flags is already hot in cache. With
this set, l3s mode is working fine and I also get things like
masquerading pod traffic on the ipvlan master properly working.
[0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf
Fixes: f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant")
Fixes: 5f02ce24c269 ("net: l3mdev: Allow the l3mdev to be a loopback")
Fixes: 4fbae7d83c98 ("ipvlan: Introduce l3s mode")
Signed-off-by: Daniel Borkmann <[email protected]>
Cc: Mahesh Bandewar <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Florian Westphal <[email protected]>
Cc: Martynas Pumputis <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use pskb_may_pull() to make sure the optional fields are in skb linear
parts, so we can safely read them later.
It's easy to reproduce the issue with a net driver that supports paged
skb data. Just create a L2TPv3 over IP tunnel and then generates some
network traffic.
Once reproduced, rx err in /sys/kernel/debug/l2tp/tunnels will increase.
Changes in v4:
1. s/l2tp_v3_pull_opt/l2tp_v3_ensure_opt_in_linear/
2. s/tunnel->version != L2TP_HDR_VER_2/tunnel->version == L2TP_HDR_VER_3/
3. Add 'Fixes' in commit messages.
Changes in v3:
1. To keep consistency, move the code out of l2tp_recv_common.
2. Use "net" instead of "net-next", since this is a bug fix.
Changes in v2:
1. Only fix L2TPv3 to make code simple.
To fix both L2TPv3 and L2TPv2, we'd better refactor l2tp_recv_common.
It's complicated to do so.
2. Reloading pointers after pskb_may_pull
Fixes: f7faffa3ff8e ("l2tp: Add L2TPv3 protocol support")
Fixes: 0d76751fad77 ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support")
Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6")
Signed-off-by: Jacob Wen <[email protected]>
Acked-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Call tun_set_real_num_queues() after the increment of tun->numqueues
since the former depends on it. Otherwise, the number of queues is not
correctly accounted for, which results to warnings similar to:
"vnet0 selects TX queue 11, but real number of TX queues is 11".
Fixes: 0b7959b62573 ("tun: publish tfile after it's fully initialized")
Reported-and-tested-by: George Amanakis <[email protected]>
Signed-off-by: George Amanakis <[email protected]>
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
skb->cb may contain data from previous layers (in an observed case
IPv4 with L3 Master Device). In the observed scenario, the data in
IPCB(skb)->frags was misinterpreted as IP6CB(skb)->frag_max_size,
eventually caused an unexpected IPv6 fragmentation in ip6_fragment()
through ip6_finish_output().
This patch clears IP6CB(skb), which potentially contains garbage data,
on the SRH ip4ip6 encapsulation.
Fixes: 32d99d0b6702 ("ipv6: sr: add support for ip4ip6 encapsulation")
Signed-off-by: Yohei Kanemaru <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Toshiaki Makita says:
====================
virtio_net: Fix problems around XDP tx and napi_tx
While I'm looking into how to account standard tx counters on XDP tx
processing, I found several bugs around XDP tx and napi_tx.
Patch1: Fix oops on error path. Patch2 depends on this.
Patch2: Fix memory corruption on freeing xdp_frames with napi_tx enabled.
Patch3: Minor fix patch5 depends on.
Patch4: Fix memory corruption on processing xdp_frames when XDP is disabled.
Also patch5 depends on this.
Patch5: Fix memory corruption on processing xdp_frames while XDP is being
disabled.
Patch6: Minor fix patch7 depends on.
Patch7: Fix memory corruption on freeing sk_buff or xdp_frames when a normal
queue is reused for XDP and vise versa.
v2:
- patch5: Make rcu_assign_pointer/synchronize_net conditional instead of
_virtnet_set_queues.
- patch7: Use napi_consume_skb() instead of dev_consume_skb_any()
====================
Signed-off-by: Toshiaki Makita <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We do not reset or free up unused buffers when enabling/disabling XDP,
so it can happen that xdp_frames are freed after disabling XDP or
sk_buffs are freed after enabling XDP on xdp tx queues.
Thus we need to handle both forms (xdp_frames and sk_buffs) regardless
of XDP setting.
One way to trigger this problem is to disable XDP when napi_tx is
enabled. In that case, virtnet_xdp_set() calls virtnet_napi_enable()
which kicks NAPI. The NAPI handler will call virtnet_poll_cleantx()
which invokes free_old_xmit_skbs() for queues which have been used by
XDP.
Note that even with this change we need to keep skipping
free_old_xmit_skbs() from NAPI handlers when XDP is enabled, because XDP
tx queues do not aquire queue locks.
- v2: Use napi_consume_skb() instead of dev_consume_skb_any()
Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set")
Signed-off-by: Toshiaki Makita <[email protected]>
Acked-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
put_page() can work as a fallback for freeing xdp_frames, but the
appropriate way is to use xdp_return_frame().
Fixes: cac320c850ef ("virtio_net: convert to use generic xdp_frame and xdp_return_frame API")
Signed-off-by: Toshiaki Makita <[email protected]>
Acked-by: Jason Wang <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit 8dcc5b0ab0ec ("virtio_net: fix ndo_xdp_xmit crash towards dev not
ready for XDP") tried to avoid access to unexpected sq while XDP is
disabled, but was not complete.
There was a small window which causes out of bounds sq access in
virtnet_xdp_xmit() while disabling XDP.
An example case of
- curr_queue_pairs = 6 (2 for SKB and 4 for XDP)
- online_cpu_num = xdp_queue_paris = 4
when XDP is enabled:
CPU 0 CPU 1
(Disabling XDP) (Processing redirected XDP frames)
virtnet_xdp_xmit()
virtnet_xdp_set()
_virtnet_set_queues()
set curr_queue_pairs (2)
check if rq->xdp_prog is not NULL
virtnet_xdp_sq(vi)
qp = curr_queue_pairs -
xdp_queue_pairs +
smp_processor_id()
= 2 - 4 + 1 = -1
sq = &vi->sq[qp] // out of bounds access
set xdp_queue_pairs (0)
rq->xdp_prog = NULL
Basically we should not change curr_queue_pairs and xdp_queue_pairs
while someone can read the values. Thus, when disabling XDP, assign NULL
to rq->xdp_prog first, and wait for RCU grace period, then change
xxx_queue_pairs.
Note that we need to keep the current order when enabling XDP though.
- v2: Make rcu_assign_pointer/synchronize_net conditional instead of
_virtnet_set_queues.
Fixes: 186b3c998c50 ("virtio-net: support XDP_REDIRECT")
Signed-off-by: Toshiaki Makita <[email protected]>
Acked-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When XDP is disabled, curr_queue_pairs + smp_processor_id() can be
larger than max_queue_pairs.
There is no guarantee that we have enough XDP send queues dedicated for
each cpu when XDP is disabled, so do not count drops on sq in that case.
Fixes: 5b8f3c8d30a6 ("virtio_net: Add XDP related stats")
Signed-off-by: Toshiaki Makita <[email protected]>
Acked-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When _virtnet_set_queues() failed we did not restore real_num_rx_queues.
Fix this by placing the change of real_num_rx_queues after
_virtnet_set_queues().
This order is also in line with virtnet_set_channels().
Fixes: 4941d472bf95 ("virtio-net: do not reset during XDP set")
Signed-off-by: Toshiaki Makita <[email protected]>
Acked-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When napi_tx is enabled, virtnet_poll_cleantx() called
free_old_xmit_skbs() even for xdp send queue.
This is bogus since the queue has xdp_frames, not sk_buffs, thus mangled
device tx bytes counters because skb->len is meaningless value, and even
triggered oops due to general protection fault on freeing them.
Since xdp send queues do not aquire locks, old xdp_frames should be
freed only in virtnet_xdp_xmit(), so just skip free_old_xmit_skbs() for
xdp send queues.
Similarly virtnet_poll_tx() called free_old_xmit_skbs(). This NAPI
handler is called even without calling start_xmit() because cb for tx is
by default enabled. Once the handler is called, it enabled the cb again,
and then the handler would be called again. We don't need this handler
for XDP, so don't enable cb as well as not calling free_old_xmit_skbs().
Also, we need to disable tx NAPI when disabling XDP, so
virtnet_poll_tx() can safely access curr_queue_pairs and
xdp_queue_pairs, which are not atomically updated while disabling XDP.
Fixes: b92f1e6751a6 ("virtio-net: transmit napi")
Fixes: 7b0411ef4aa6 ("virtio-net: clean tx descriptors from rx napi")
Signed-off-by: Toshiaki Makita <[email protected]>
Acked-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit 4e09ff536284 ("virtio-net: disable NAPI only when enabled during
XDP set") tried to fix inappropriate NAPI enabling/disabling when
!netif_running(), but was not complete.
On error path virtio_net could enable NAPI even when !netif_running().
This can cause enabling NAPI twice on virtnet_open(), which would
trigger BUG_ON() in napi_enable().
Fixes: 4941d472bf95b ("virtio-net: do not reset during XDP set")
Signed-off-by: Toshiaki Makita <[email protected]>
Acked-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Lorenzo Bianconi says:
====================
erspan: always reports output key to userspace
Erspan protocol relies on output key to set session id header field.
However TUNNEL_KEY bit is cleared in order to not add key field to
the external GRE header and so the configured o_key is not reported
to userspace.
Fix the issue adding TUNNEL_KEY bit to the o_flags parameter dumping
device info
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
As Erspan_v4, Erspan_v6 protocol relies on o_key to configure
session id header field. However TUNNEL_KEY bit is cleared in
ip6erspan_tunnel_xmit since ERSPAN protocol does not set the key field
of the external GRE header and so the configured o_key is not reported
to userspace. The issue can be triggered with the following reproducer:
$ip link add ip6erspan1 type ip6erspan local 2000::1 remote 2000::2 \
key 1 seq erspan_ver 1
$ip link set ip6erspan1 up
ip -d link sh ip6erspan1
ip6erspan1@NONE: <BROADCAST,MULTICAST> mtu 1422 qdisc noop state DOWN mode DEFAULT
link/ether ba:ff:09:24:c3:0e brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
ip6erspan remote 2000::2 local 2000::1 encaplimit 4 flowlabel 0x00000 ikey 0.0.0.1 iseq oseq
Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in
ip6gre_fill_info
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Erspan protocol (version 1 and 2) relies on o_key to configure
session id header field. However TUNNEL_KEY bit is cleared in
erspan_xmit since ERSPAN protocol does not set the key field
of the external GRE header and so the configured o_key is not reported
to userspace. The issue can be triggered with the following reproducer:
$ip link add erspan1 type erspan local 192.168.0.1 remote 192.168.0.2 \
key 1 seq erspan_ver 1
$ip link set erspan1 up
$ip -d link sh erspan1
erspan1@NONE: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc pfifo_fast state UNKNOWN mode DEFAULT
link/ether 52:aa:99:95:9a:b5 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
erspan remote 192.168.0.2 local 192.168.0.1 ttl inherit ikey 0.0.0.1 iseq oseq erspan_index 0
Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in
ipgre_fill_info
Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
After a timeout event caused by for example a broadcast storm, when
the MAC and PHY are reset, the BQL TX queue needs to be reset as
well. Otherwise, the device will exhibit severe performance issues
even after the storm has ended.
Co-authored-by: David Gounaris <[email protected]>
Signed-off-by: Mathias Thore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Johannes Berg says:
====================
various compat ioctl fixes
Back a long time ago, I already fixed a few of these by passing
the size of the struct ifreq to do_sock_ioctl(). However, Robert
found more cases, and now it won't be as simple because we'd have
to pass that down all the way to e.g. bond_do_ioctl() which isn't
really feasible.
Therefore, restore the old code.
While looking at why SIOCGIFNAME was broken, I realized that Al
had removed that case - which had been handled in an explicit
separate function - as well, and looking through his work at the
time I saw that bond ioctls were also affected by the erroneous
removal.
I've restored SIOCGIFNAME and bond ioctls by going through the
(now renamed) dev_ifsioc() instead of reintroducing their own
helper functions, which I hope is correct but have only tested
with SIOCGIFNAME.
====================
Acked-by: Al Viro <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Same story as before, these use struct ifreq and thus need
to be read with the shorter version to not cause faults.
Cc: [email protected]
Fixes: f92d4fc95341 ("kill bond_ioctl()")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As reported by Robert O'Callahan in
https://bugzilla.kernel.org/show_bug.cgi?id=202273
reverting the previous changes in this area broke
the SIOCGIFNAME ioctl in compat again (I'd previously
fixed it after his previous report of breakage in
https://bugzilla.kernel.org/show_bug.cgi?id=199469).
This is obviously because I fixed SIOCGIFNAME more or
less by accident.
Fix it explicitly now by making it pass through the
restored compat translation code.
Cc: [email protected]
Fixes: 4cf808e7ac32 ("kill dev_ifname32()")
Reported-by: Robert O'Callahan <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit bf4405737f9f ("kill dev_ifsioc()").
This wasn't really unused as implied by the original commit,
it still handles the copy to/from user differently, and the
commit thus caused issues such as
https://bugzilla.kernel.org/show_bug.cgi?id=199469
and
https://bugzilla.kernel.org/show_bug.cgi?id=202273
However, deviating from a strict revert, rename dev_ifsioc()
to compat_ifreq_ioctl() to be clearer as to its purpose and
add a comment.
Cc: [email protected]
Fixes: bf4405737f9f ("kill dev_ifsioc()")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit 1cebf8f143c2 ("socket: fix struct ifreq
size in compat ioctl"), it's a bugfix for another commit that
I'll revert next.
This is not a 'perfect' revert, I'm keeping some coding style
intact rather than revert to the state with indentation errors.
Cc: [email protected]
Fixes: 1cebf8f143c2 ("socket: fix struct ifreq size in compat ioctl")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Yonghong Song says:
====================
The current btf implementation disallows the typedef of
a func_proto type. This actually is allowed per C standard.
This patch fixed btf verification to permit such types.
Patch #1 fixed the kernel side and Patch #2 fixed
the tools test_btf test.
====================
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Fixed one test_btf raw test such that typedef func_proto
is permitted now.
Fixes: 78a2540e8945 ("tools/bpf: Add tests for BTF_KIND_FUNC_PROTO and BTF_KIND_FUNC")
Acked-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Current implementation does not allow typedef func_proto.
But it is actually allowed.
-bash-4.4$ cat t.c
typedef int (f) (int);
f *g;
-bash-4.4$ clang -O2 -g -c -target bpf t.c -Xclang -target-feature -Xclang +dwarfris
-bash-4.4$ pahole -JV t.o
File t.o:
[1] PTR (anon) type_id=2
[2] TYPEDEF f type_id=3
[3] FUNC_PROTO (anon) return=4 args=(4 (anon))
[4] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED
-bash-4.4$
This patch related btf verifier to allow such (typedef func_proto)
patterns.
Fixes: 2667a2626f4d ("bpf: btf: Add BTF_KIND_FUNC and BTF_KIND_FUNC_PROTO")
Acked-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Pull networking fixes from David Miller:
1) Need to save away the IV across tls async operations, from Dave
Watson.
2) Upon successful packet processing, we should liberate the SKB with
dev_consume_skb{_irq}(). From Yang Wei.
3) Only apply RX hang workaround on effected macb chips, from Harini
Katakam.
4) Dummy netdev need a proper namespace assigned to them, from Josh
Elsasser.
5) Some paths of nft_compat run lockless now, and thus we need to use a
proper refcnt_t. From Florian Westphal.
6) Avoid deadlock in mlx5 by doing IRQ locking, from Moni Shoua.
7) netrom does not refcount sockets properly wrt. timers, fix that by
using the sock timer API. From Cong Wang.
8) Fix locking of inexact inserts of xfrm policies, from Florian
Westphal.
9) Missing xfrm hash generation bump, also from Florian.
10) Missing of_node_put() in hns driver, from Yonglong Liu.
11) Fix DN_IFREQ_SIZE, from Johannes Berg.
12) ip6mr notifier is invoked during traversal of wrong table, from Nir
Dotan.
13) TX promisc settings not performed correctly in qed, from Manish
Chopra.
14) Fix OOB access in vhost, from Jason Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
MAINTAINERS: Add entry for XDP (eXpress Data Path)
net: set default network namespace in init_dummy_netdev()
net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles
net: caif: call dev_consume_skb_any when skb xmit done
net: 8139cp: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: macb: Apply RXUBR workaround only to versions with errata
net: ti: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: apple: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
net: amd8111e: replace dev_kfree_skb_irq by dev_consume_skb_irq
net: alteon: replace dev_kfree_skb_irq by dev_consume_skb_irq
net: tls: Fix deadlock in free_resources tx
net: tls: Save iv in tls_rec for async crypto requests
vhost: fix OOB in get_rx_bufs()
qed: Fix stack out of bounds bug
qed: Fix system crash in ll2 xmit
qed: Fix VF probe failure while FLR
qed: Fix LACP pdu drops for VFs
qed: Fix bug in tx promiscuous mode settings
net: i825xx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles
netfilter: ipt_CLUSTERIP: fix warning unused variable cn
...
|
|
Add multiple people as maintainers for XDP, sorted alphabetically.
XDP is also tied to driver level support and code, but we cannot add all
drivers to the list. Instead K: and N: match on 'xdp' in hope to catch some
of those changes in drivers.
Signed-off-by: Jesper Dangaard Brouer <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Acked-by: David S. Miller <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Assign a default net namespace to netdevs created by init_dummy_netdev().
Fixes a NULL pointer dereference caused by busy-polling a socket bound to
an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat
if napi_poll() received packets:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000190
IP: napi_busy_loop+0xd6/0x200
Call Trace:
sock_poll+0x5e/0x80
do_sys_poll+0x324/0x5a0
SyS_poll+0x6c/0xf0
do_syscall_64+0x6b/0x1f0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: 7db6b048da3b ("net: Commonize busy polling code to focus on napi_id instead of socket")
Signed-off-by: Josh Elsasser <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The skb should be freed by dev_consume_skb_any() in b44_start_xmit()
when bounce_skb is used. The skb is be replaced by bounce_skb, so the
original skb should be consumed(not drop).
dev_consume_skb_irq() should be called in b44_tx() when skb xmit
done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The skb shouled be consumed when xmit done, it makes drop profiles
(dropwatch, perf) more friendly.
dev_kfree_skb_irq()/kfree_skb() shouled be replaced by
dev_consume_skb_any(), it makes code cleaner.
Signed-off-by: Yang Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
dev_consume_skb_irq() should be called in cp_tx() when skb xmit
done. It makes drop profiles(dropwatch, perf) more friendly.
Signed-off-by: Yang Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The interrupt handler contains a workaround for RX hang applicable
to Zynq and AT91RM9200 only. Subsequent versions do not need this
workaround. This workaround unnecessarily resets RX whenever RX used
bit read is observed, which can be often under heavy traffic. There
is no other action performed on RX UBR interrupt. Hence introduce a
CAPS mask; enable this interrupt and workaround only on affected
versions.
Signed-off-by: Harini Katakam <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
dev_consume_skb_irq() should be called in cpmac_end_xmit() when
xmit done. It makes drop profiles more friendly.
Signed-off-by: Yang Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
dev_consume_skb_irq() should be called in bmac_txdma_intr() when
xmit done. It makes drop profiles more friendly.
Signed-off-by: Yang Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
dev_consume_skb_irq() should be called in amd8111e_tx() when xmit
done. It makes drop profiles more friendly.
Signed-off-by: Yang Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
dev_consume_skb_irq() should be called in ace_tx_int() when xmit
done. It makes drop profiles more friendly.
Signed-off-by: Yang Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If there are outstanding async tx requests (when crypto returns EINPROGRESS),
there is a potential deadlock: the tx work acquires the lock, while we
cancel_delayed_work_sync() while holding the lock. Drop the lock while waiting
for the work to complete.
Fixes: a42055e8d2c30 ("Add support for async encryption of records...")
Signed-off-by: Dave Watson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
aead_request_set_crypt takes an iv pointer, and we change the iv
soon after setting it. Some async crypto algorithms don't save the iv,
so we need to save it in the tls_rec for async requests.
Found by hardcoding x64 aesni to use async crypto manager (to test the async
codepath), however I don't think this combination can happen in the wild.
Presumably other hardware offloads will need this fix, but there have been
no user reports.
Fixes: a42055e8d2c30 ("Add support for async encryption of records...")
Signed-off-by: Dave Watson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
After batched used ring updating was introduced in commit e2b3b35eb989
("vhost_net: batch used ring update in rx"). We tend to batch heads in
vq->heads for more than one packet. But the quota passed to
get_rx_bufs() was not correctly limited, which can result a OOB write
in vq->heads.
headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx,
vhost_len, &in, vq_log, &log,
likely(mergeable) ? UIO_MAXIOV : 1);
UIO_MAXIOV was still used which is wrong since we could have batched
used in vq->heads, this will cause OOB if the next buffer needs more
than 960 (1024 (UIO_MAXIOV) - 64 (VHOST_NET_BATCH)) heads after we've
batched 64 (VHOST_NET_BATCH) heads:
Acked-by: Stefan Hajnoczi <[email protected]>
=============================================================================
BUG kmalloc-8k (Tainted: G B ): Redzone overwritten
-----------------------------------------------------------------------------
INFO: 0x00000000fd93b7a2-0x00000000f0713384. First byte 0xa9 instead of 0xcc
INFO: Allocated in alloc_pd+0x22/0x60 age=3933677 cpu=2 pid=2674
kmem_cache_alloc_trace+0xbb/0x140
alloc_pd+0x22/0x60
gen8_ppgtt_create+0x11d/0x5f0
i915_ppgtt_create+0x16/0x80
i915_gem_create_context+0x248/0x390
i915_gem_context_create_ioctl+0x4b/0xe0
drm_ioctl_kernel+0xa5/0xf0
drm_ioctl+0x2ed/0x3a0
do_vfs_ioctl+0x9f/0x620
ksys_ioctl+0x6b/0x80
__x64_sys_ioctl+0x11/0x20
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
INFO: Slab 0x00000000d13e87af objects=3 used=3 fp=0x (null) flags=0x200000000010201
INFO: Object 0x0000000003278802 @offset=17064 fp=0x00000000e2e6652b
Fixing this by allocating UIO_MAXIOV + VHOST_NET_BATCH iovs for
vhost-net. This is done through set the limitation through
vhost_dev_init(), then set_owner can allocate the number of iov in a
per device manner.
This fixes CVE-2018-16880.
Fixes: e2b3b35eb989 ("vhost_net: batch used ring update in rx")
Signed-off-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In order to better scale BPF development on netdev, we've adopted a
reviewer rotation for all BPF patches among the five of us for some
time now. Lets give credit where credit is due, and add Martin, Song
and Yonghong as official BPF reviewers to MAINTAINERS file. Also
while at it, add regex matching for BPF such that we get properly
Cc'ed for files not listed here.
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Martin KaFai Lau <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Despite having stopped the parser, we still need to deinitialize it
by calling strp_done so that it cancels its work. Otherwise the worker
thread can run after we have freed the parser, and attempt to access
its workqueue resulting in a use-after-free:
==================================================================
BUG: KASAN: use-after-free in pwq_activate_delayed_work+0x1b/0x1d0
Read of size 8 at addr ffff888069975240 by task kworker/u2:2/93
CPU: 0 PID: 93 Comm: kworker/u2:2 Not tainted 5.0.0-rc2-00335-g28f9d1a3d4fe-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014
Workqueue: (null) (kstrp)
Call Trace:
print_address_description+0x6e/0x2b0
? pwq_activate_delayed_work+0x1b/0x1d0
kasan_report+0xfd/0x177
? pwq_activate_delayed_work+0x1b/0x1d0
? pwq_activate_delayed_work+0x1b/0x1d0
pwq_activate_delayed_work+0x1b/0x1d0
? process_one_work+0x4aa/0x660
pwq_dec_nr_in_flight+0x9b/0x100
worker_thread+0x82/0x680
? process_one_work+0x660/0x660
kthread+0x1b9/0x1e0
? __kthread_create_on_node+0x250/0x250
ret_from_fork+0x1f/0x30
Allocated by task 111:
sk_psock_init+0x3c/0x1b0
sock_map_link.isra.2+0x103/0x4b0
sock_map_update_common+0x94/0x270
sock_map_update_elem+0x145/0x160
__se_sys_bpf+0x152e/0x1e10
do_syscall_64+0xb2/0x3e0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 112:
kfree+0x7f/0x140
process_one_work+0x40b/0x660
worker_thread+0x82/0x680
kthread+0x1b9/0x1e0
ret_from_fork+0x1f/0x30
The buggy address belongs to the object at ffff888069975180
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 192 bytes inside of
512-byte region [ffff888069975180, ffff888069975380)
The buggy address belongs to the page:
page:ffffea0001a65d00 count:1 mapcount:0 mapping:ffff88806d401280 index:0x0 compound_mapcount: 0
flags: 0x4000000000010200(slab|head)
raw: 4000000000010200 dead000000000100 dead000000000200 ffff88806d401280
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888069975100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888069975180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888069975200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888069975280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888069975300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Reported-by: Marek Majkowski <[email protected]>
Signed-off-by: Jakub Sitnicki <[email protected]>
Link: https://lore.kernel.org/netdev/CAJPywTLwgXNEZ2dZVoa=udiZmtrWJ0q5SuBW64aYs0Y1khXX3A@mail.gmail.com
Acked-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Prog arrays don't have 'owner_prog_type' and 'owner_jited'
fields in their fdinfo when they are created. Those fields
are set and reported when first program is checked for
compatibility by bpf_prog_array_compatible().
This means that bpftool cannot expect the fields to always
be there. Currently trying to show maps on a system with
an un-owned prog array leads to a crash:
$ bpftool map show
389: prog_array name tail_call_map flags 0x0
Error: key 'owner_prog_type' not found in fdinfo
Error: key 'owner_jited' not found in fdinfo
key 4B value 4B max_entries 4 memlock 4096B
Segmentation fault (core dumped)
We pass a NULL pointer to atoi().
Remove the assumption that fdinfo keys are always present.
Add missing validations and remove the p_err() calls which
may lead to broken JSON output as caller will not propagate
the failure.
Fixes: 99a44bef5870 ("tools: bpftool: add owner_prog_type and owner_jited to bpftool output")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Quentin Monnet <[email protected]>
Acked-by: Song Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|