aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-06-03drm/radeon/kms/pm: voltage fixesAlex Deucher2-4/+12
- Enable GPIO voltage for non pm modes as well so resetting the default voltage works. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-03drm/radeon/kms/pm: radeon_set_power_state fixesAlex Deucher1-41/+34
- wait for vbl for both profile and dynpm - unify profile and dynpm code paths more - call pm_misc before of after clocks to make sure voltage is changed in the proper order. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-03drm/radeon/kms/pm: patch default power state with default clocks/voltages on ↵Alex Deucher1-1/+24
r6xx+ The default power state does not always match the default clocks and voltage for a particular card. The information in the firmware info table is correct and should be used in preference to the info the default power state. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-03drm/radeon/kms/pm: enable SetVoltage on r7xx/evergreenAlex Deucher2-0/+10
I missed these in the r6xx commit. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-03drm/radeon/kms/pm: add support for SetVoltage cmd table (V2)Alex Deucher4-1/+45
- This enables voltage adjustment on r6xx+ and certain r5xx asics. - Voltage drop support is already available for most r1xx-r5xx asics. V2: endian fix for voltage table. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-02of/watchdog: gef_wdt.c: fix build breakageAnatolij Gustschin1-1/+1
Fixes build error caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02of/edac: fix build breakage in driversAnatolij Gustschin2-9/+9
Fixes build errors in EDAC drivers caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02of/net: fs_enet/mii-bitbang.c: fix build breakageAnatolij Gustschin1-2/+2
Fixes build error caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02of/usb: fsl_qe_udc.c: fix build breakageAnatolij Gustschin1-2/+2
Fixes build error caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02of/crypto: crypto4xx_core.c: fix build breakageAnatolij Gustschin1-3/+3
Fixes build error caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02of/dma: fix build breakage in ppc4xx adma driverAnatolij Gustschin1-2/+2
Fixes build error caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02of/mtd: nand: fix build breakage in driversAnatolij Gustschin2-10/+11
Fixes build errors in drivers caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02of/video: fix build breakage in FB driversAnatolij Gustschin7-7/+7
Fixes build errors in a number of framebuffer drivers caused by the OF device_node pointer being moved into struct device Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02of/pcmcia: m8xx_pcmcia.c: Fix build failuresAnatolij Gustschin1-2/+2
Fixes build errors caused by the: - OF device_node pointer being moved into struct device - typo in match_table field in the struct device_driver (which shoud be of_match_table) Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02ext4: Make sure the MOVE_EXT ioctl can't overwrite append-only filesTheodore Ts'o1-0/+3
Dan Roseberg has reported a problem with the MOVE_EXT ioctl. If the donor file is an append-only file, we should not allow the operation to proceed, lest we end up overwriting the contents of an append-only file. Signed-off-by: "Theodore Ts'o" <[email protected]> Cc: Dan Rosenberg <[email protected]>
2010-06-02Fix colors for Mach64Mikulas Patocka1-3/+6
Use the same color-calculating algorithm as in atyfb_imageblit in this driver or in generic cfb_fillrect. This patch fixes bad colors when using an accelerator in 15-bit and 16-bit modes. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-06-02of/rtc: rtc-mpc5121.c: Fix build failuresGrant Likely1-6/+8
Fixes build errors caused by the: - OF device_node pointer being moved into struct device - removal of the match_table field from struct of_platform_driver Signed-off-by: Grant Likely <[email protected]> CC: Paul Gortmaker <[email protected]> CC: Alessandro Zummo <[email protected]> CC: Wolfgang Denk <[email protected]> CC: Tejun Heo <[email protected]> CC: Anatolij Gustschin <[email protected]> CC: [email protected] CC: [email protected]
2010-06-02of/dma: mpc512x_dma.c: Fix build failuresAnatolij Gustschin1-5/+5
Fixes build errors caused by the: - OF device_node pointer being moved into struct device - removal of the match_table field from struct of_platform_driver Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02of/mtd/nand: mpc5121_nfc.c: Fix build failuresAnatolij Gustschin1-4/+4
Fixes build errors caused by the: - OF device_node pointer being moved into struct device - removal of the match_table field from struct of_platform_driver Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02of/spi: mpc512x_psc_spi.c: Fix build failuresAnatolij Gustschin1-6/+6
Fixes build errors caused by the: - OF device_node pointer being moved into struct device - removal of the match_table field from struct of_platform_driver Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02watchdog: Fix build failure with OF changesMichael Guntsche1-1/+1
commit 61c7a080a5a061c976988fd4b844dfb468dda255 ( of: Always use 'struct device.of_node' to get device node pointer.) missed drivers/watchdog/mpc8xxx_wdt.c. This patch fixes it Signed-off-by: Michael Guntsche <[email protected]> Signed-off-by: Grant Likely <[email protected]>
2010-06-02of/spi: Fix build failure on spi_ppc4xx.cGrant Likely1-1/+1
This patch fixes a build error caused by the OF device_node pointer being moved into struct device. Fixes bug introduced by commit 61c7a080a5a061c976988fd4b844dfb468dda255 (of: Always use 'struct device.of_node' to get device node pointer) Signed-off-by: Grant Likely <[email protected]> CC: Sean MacLennan <[email protected]> CC: [email protected] CC: [email protected]
2010-06-02of/usb: fix build error due to of_node pointer moveGrant Likely1-1/+1
Fix driver to use new location of of_node pointer (introduced by commit use new location of of_node pointer (introduced by commit 61c7a080a5a061c976988fd4b844dfb468dda255; of: Always use 'struct device.of_node' to get device node pointer) Signed-off-by: Grant Likely <[email protected]> Reported-by: John Linn <[email protected]> CC: Greg Kroah-Hartman <[email protected]> CC: Alan Stern <[email protected]> CC: [email protected] CC: [email protected]
2010-06-02libata: implement on-demand HPA unlockingTejun Heo3-0/+32
Implement ata_scsi_unlock_native_capacity() which will be called through SCSI layer when block layer notices that partitions on a device extend beyond the end of the device. It requests EH to unlock HPA, waits for completion and returns the current device capacity. This allows libata to unlock HPA on demand instead of having to decide whether to unlock upfront. Unlocking on demand is safer than unlocking by upfront because some BIOSes write private data to the area beyond HPA limit. This was suggested by Ben Hutchings. Signed-off-by: Tejun Heo <[email protected]> Suggested-by: Ben Hutchings <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2010-06-02libata: use the enlarged capacity after late HPA unlockTejun Heo1-3/+2
After late HPA unlock, libata kept using the original capacity ignoring the new larger native capacity. Enlarging device on the fly doesn't cause any harm. Use the larger native capacity instead. This will enable on-demand HPA unlocking. Signed-off-by: Tejun Heo <[email protected]> Cc: Ben Hutchings <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2010-06-02SCSI: implement sd_unlock_native_capacity()Tejun Heo2-0/+30
Implement sd_unlock_native_capacity() method which calls into hostt->unlock_native_capacity() if implemented. This will be invoked by block layer if partitions extend beyond the end of the device and can be used to implement, for example, on-demand ATA host protected area unlocking. Signed-off-by: Tejun Heo <[email protected]> Cc: Ben Hutchings <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2010-06-02libata-sff: trivial corrections to Kconfig help textStefan Richter1-3/+3
Signed-off-by: Stefan Richter <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2010-06-02sata_nv: don't diddle with nIEN on mcp55Tejun Heo1-2/+0
On mcp55, nIEN gets stuck once set and liteon blueray rom iHOS104-08 violates ATA specification and fails to set I on D2H Reg FIS if nIEN is set when the command was issued. When the other party is following the spec, both devices can work fine but when the two flaws are put together, they can't talk to each other. mcp55 has its own IRQ masking mechanism and there's no reason to mess with nIEN in the first place. Fix it by dropping nIEN diddling from nv_mcp55_freeze/thaw(). This was originally reported by Cengiz. Although Cengiz hasn't verified the fix yet, I could reproduce this problem and verfiy the fix. Even if Cengiz is experiencing different or additional problems, this patch is needed. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Cengiz Günay <[email protected]> Cc: [email protected] Signed-off-by: Jeff Garzik <[email protected]>
2010-06-02sata_via: magic vt6421 fix for transmission problems w/ WD drivesTejun Heo1-0/+13
vt6421 has problems talking to recent WD drives. It causes a lot of transmission errors while high bandwidth transfer as reported in the following bugzilla entry. https://bugzilla.kernel.org/show_bug.cgi?id=15173 Joseph Chan provided the following fix. I don't have any idea what it does but I can verify the issue is gone with the patch applied. Signed-off-by: Tejun Heo <[email protected]> Originally-from: Joseph Chan <[email protected]> Reported-by: Jorrit Tijben <[email protected]> Cc: [email protected] Signed-off-by: Jeff Garzik <[email protected]>
2010-06-02firewire: core: check for 1394a compliant IRM, fix inaccessibility of Sony ↵Stefan Richter1-5/+19
camcorder Per IEEE 1394 clause 8.4.2.3, a contender for the IRM role shall check whether the current IRM complies to 1394a-2000 or later. If not force a compliant node (e.g. itself) to become IRM. This was implemented in the older ieee1394 driver but not yet in firewire-core. An older Sony camcorder (Sony DCR-TRV25) which implements 1394-1995 IRM but neither 1394a-2000 IRM nor BM was now found to cause an interoperability bug: - Camcorder becomes root node when plugged in, hence gets IRM role. - firewire-core successfully contends for BM role, proceeds to perform gap count optimization and resets the bus. - Sony camcorder ignores presence of a BM (against the spec, this is a firmware bug), performs its idea of gap count optimization and resets the bus. - Preceding two steps are repeated endlessly, bus never settles, regular I/O is practically impossible. http://thread.gmane.org/gmane.linux.kernel.firewire.user/3913 This is an interoperability regression from the old to the new drivers. Fix it indirectly by adding the 1394a IRM check. The spec suggests three and a half methods to determine 1394a compliance of a remote IRM; we choose the method of testing the Config_ROM.Bus_Info.generation field. This is data that firewire-core should have readily available at this point, i.e. does not require extra I/O. Reported-by: Clemens Ladisch <[email protected]> (missing 1394a check) Reported-by: H. S. <[email protected]> (issue with Sony DCR-TRV25) Tested-by: H. S. <[email protected]> Cc: <[email protected]> # .32.x and newer Signed-off-by: Stefan Richter <[email protected]>
2010-06-02mtd/r852: update card detect early.Maxim Levitsky1-1/+1
This turns out to be the reason for DMA timeouts on resume, if card was inserted while system was suspended Signed-off-by: Maxim Levitsky <[email protected]> Signed-off-by: David Woodhouse <[email protected]>
2010-06-02cls_u32: use skb_header_pointer() to dereference data safelyChangli Gao1-13/+36
use skb_header_pointer() to dereference data safely the original skb->data dereference isn't safe, as there isn't any skb->len or skb_is_nonlinear() check. skb_header_pointer() is used instead in this patch. And when the skb isn't long enough, we terminate the function u32_classify() immediately with -1. Signed-off-by: Changli Gao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-02TCP: tcp_hybla: Fix integer overflow in slow start incrementDaniele Lacamera1-2/+2
For large values of rtt, 2^rho operation may overflow u32. Clamp down the increment to 2^16. Signed-off-by: Daniele Lacamera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-02mtd/r852: Fixes in case of DMA timeoutMaxim Levitsky1-3/+11
* Don't call complete on dma completion * do a INIT_COMPLETE before using it each time * Report DMA read error via ecc 'correct' I finally managed to make my system do suspend to ram propertly, and I see that if card was inserted during suspend (while system was off), I get dma timeouts on resume. Simple card reinsert solves the issue. This patch solves a crash that would happen otherwise Signed-off-by: Maxim Levitsky <[email protected]> Signed-off-by: David Woodhouse <[email protected]>
2010-06-02mtd/r852: register IRQ as last stepMaxim Levitsky1-5/+6
Otherwise, if it fires right away, it might access uninitialized spinlock Signed-off-by: Maxim Levitsky <[email protected]> Signed-off-by: David Woodhouse <[email protected]>
2010-06-02act_nat: fix the wrong checksum when addr isn't in old_addr/maskChangli Gao1-0/+4
fix the wrong checksum when addr isn't in old_addr/mask For TCP and UDP packets, when addr isn't in old_addr/mask we don't do SNAT or DNAT, and we should not update layer 4 checksum. Signed-off-by: Changli Gao <[email protected]> ---- net/sched/act_nat.c | 4 ++++ 1 file changed, 4 insertions(+) Signed-off-by: David S. Miller <[email protected]>
2010-06-02net/fec: fix pm to survive to suspend/resumeEric Bénard1-8/+8
* in the actual driver, calling fec_stop and fec_enet_init doesn't allow to have a working network interface at resume (where a ifconfig down and up is required to recover the interface) * by using fec_enet_close and fec_enet_open, this patch solves this problem and handle the case where the link changed between suspend and resume * this patch also disable clock at suspend and reenable it at resume Signed-off-by: Eric Bénard <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-02korina: count RX DMA OVR as rx_fifo_errorPhil Sutter1-1/+1
This way, RX DMA overruns (actually being caused by overrun of the 512byte input FIFO) show up in ifconfig output. The rx_fifo_errors counter is unused otherwise. Signed-off-by: Phil Sutter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-02korina: use netdev_alloc_skb_ip_align() here, tooPhil Sutter1-2/+1
This patch completes commit 89d71a66c40d629e3b1285def543ab1425558cd5 which missed this spot, as it seems. Signed-off-by: Phil Sutter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-02korina: fix deadlock on RX FIFO overrunPhil Sutter1-14/+13
By calling korina_restart(), the IRQ handler tries to disable the interrupt it's currently serving. This leads to a deadlock since disable_irq() waits for any running IRQ handlers to finish before returning. This patch addresses the issue by turning korina_restart() into a workqueue task, which is then scheduled when needed. Reproducing the deadlock is easily done using e.g. GNU netcat to send large amounts of UDP data to the host running this driver. Note that the same problem (and fix) applies to TX FIFO underruns, but apparently these are less easy to trigger. Signed-off-by: Phil Sutter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-02Merge branch 'fix/asoc' into for-linusTakashi Iwai1-1/+10
2010-06-02Merge branch 'fix/hda' into for-linusTakashi Iwai211-2101/+9618
2010-06-02Merge branch 'for-2.6.35' of ↵Takashi Iwai1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
2010-06-02Merge branch 'master' of git.alsa-project.org:alsa-kernel into fix/hdaTakashi Iwai211-2101/+9618
2010-06-02ALSA: hda-intel - fix wallclk variable update and conditionJaroslav Kysela1-2/+2
This patch fixes thinko introduced in "last minutes" before commiting of the last wallclk patch. It also fixes the condition checking if the first period after last wallclk update is processed. There is a little rounding error in period_wallclk. Signed-off-by: Jaroslav Kysela <[email protected]>
2010-06-02net: fix conflict between null_or_orig and null_or_bondJohn Fastabend1-4/+4
If a skb is received on an inactive bond that does not meet the special cases checked for by skb_bond_should_drop it should only be delivered to exact matches as the comment in netif_receive_skb() says. However because null_or_bond could also be null this is not always true. This patch renames null_or_bond to orig_or_bond and initializes it to orig_dev. This keeps the intent of null_or_bond to pass frames received on VLAN interfaces stacked on bonding interfaces without invalidating the statement for null_or_orig. Signed-off-by: John Fastabend <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-02net: init_vlan should not copy slave or master flagsJohn Fastabend1-1/+2
The vlan device should not copy the slave or master flags from the real device. It is not in the bond until added nor is it a master. Signed-off-by: John Fastabend <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-02Merge branch 'fix/hda' into for-linusTakashi Iwai2-0/+4
2010-06-02ALSA: asihpi - Fix uninitialized variableTakashi Iwai1-0/+3
Initialize prev_ctl properly before reference: sound/pci/asihpi/asihpi.c: In function ‘snd_card_asihpi_mixer_new’: sound/pci/asihpi/asihpi.c:2568:30: warning: ‘prev_ctl.dst_node_index’ may be used uninitialized in this function Signed-off-by: Takashi Iwai <[email protected]>
2010-06-02enic: bug fix: make the set/get netlink VF_PORT support symmetricalScott Feldman2-103/+104
To make get/set netlink VF_PORT truly symmetrical, we need to keep track of what items are set and only return those items on get. Previously, the driver wasn't differentiating between a set of attr with a NULL string, for example, and not setting the attr at all. We only want to return the NULL string if the attr was actually set with a NULL string. Otherwise, don't return the attr. Signed-off-by: Scott Feldman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.