aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-09-26s390/3270: drop unused spinlock from struct con3270Jean Delvare1-1/+0
I was checking why this spinlock was never initialized, but it turns out it's not used anywhere, so we can drop it. Signed-off-by: Jean Delvare <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/exceptions: switch to relative exception table entriesHeiko Carstens10-33/+132
This is the s390 port of 70627654 "x86, extable: Switch to relative exception table entries". Reduces the size of our exception tables by 50% on 64 bit builds. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/scm: reorder scm_removeSebastian Ott1-1/+1
Do not reset drvdata before the block device is cleaned up. With a non-empty block queue drvdata could be accessed. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/scm: remove superfluous lockSebastian Ott3-16/+3
Remove the spinlock from struct scm_device. drvdata and attributes are guarded via device_lock. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/smp,topology: add polarization member to pcpu structHeiko Carstens4-29/+25
The cpu polarization member is the only per cpu state that is not part of the pcpu structure. So add it there and have everything in one place. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/sysinfo,topology: fix cpu topology maximum nesting detectionHeiko Carstens4-20/+31
The maximum nesting of the cpu topology is evaluated when /proc/sysinfo is the first time read. This happens without a lock and a concurrent reader on a different cpu can see and use an invalid intermediate value. Besides the fact that this race is quite unlikely the worst thing that could happen is that /proc/sysinfo would contain bogus information about the machine's cpu topology. Nevertheless this should be fixed. So move the detection code to the early machine detection code and since now the value is early available use it in the topology code as well. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/mm: implement __get_user_pages_fast()Gerald Schaefer1-0/+37
This patch introduces the __get_user_pages_fast() function on s390, which will be needed with CONFIG_TRANSPARENT_HUGEPAGE and futex. Signed-off-by: Gerald Schaefer <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/sysinfo: add additional z196 fields to outputHeiko Carstens2-14/+39
Add a couple of missing fields that were introduced with z196. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/sysinfo: convert /proc/sysinfo to seqfileHeiko Carstens1-167/+115
The current proc implementation of the /proc/sysinfo file writes all informations contained in all system information blocks to a single page. This is done by calling sprintf all the time in the expectation that everything will fit into a single page. This however is not necessarily true if the configuration of a machine is very large. So convert /proc/sysinfo to avoid writing into random memory regions. For readability reasons a couple of lines are longer than 80 characters. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/topology: remove sysinfo header include, add forward declaration insteadHeiko Carstens2-1/+2
Any change to sysinfo.h causes a whole kernel recompile since sysinfo.h is included by topology.h, which again is used nearly everywhere. So remove that include and add a forward declaration instead. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/mm: shorten addressing mode initializationHeiko Carstens1-18/+10
Shorten the code for addressing mode initialization. Also add missing __init annotations, since this code is only used during kernel initialization. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/mm: rename addressing_mode to s390_user_modeHeiko Carstens7-14/+14
Renaming the globally visible variable "user_mode" to "addressing_mode" in order to fix a name clash was not a good idea. (Commit 37fe1d73 "s390/mm: rename user_mode variable to addressing_mode") Looking at the code after a couple of weeks one thinks: addressing mode of what? So rename the variable again. This time to s390_user_mode. Which hopefully makes more sense. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/partitions: make partition detection independent from DASD ioctlsStefan Weinhuber1-183/+272
In some usage scenarios it is desireable to work with disk images or virtualized DASD devices. One problem that prevents such applications is the partition detection in ibm.c. Currently it works only for devices that support the BIODASDINFO2 ioctl, in other words, it only works for devices that belong to the DASD device driver. The information gained from the BIODASDINFO2 ioctl is only for a small set of legacy cases abolutely necessary. All current VOL1, LNX1 and CMS1 type of disk labels can be interpreted correctly without this information, as long as the generic HDIO_GETGEO ioctl works and provides a correct disk geometry. This patch makes the ibm.c partition detection as independent as possible from the BIODASDINFO2 ioctl. Only the following two cases are still restricted to real DASDs: - An FBA DASD, or LDL formatted ECKD DASD without any disk label. - An old style LNX1 label (without large volume support) on a disk with inconsistent device geometry. Signed-off-by: Stefan Weinhuber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/mm: change default addressing modeHeiko Carstens1-11/+1
Change the default addressing mode so that user space runs in primary space and the kernel runs in home space. In addition remove the "switch_amode" kernel parameter so all users who already specified they want the new default behaviour will stay in the "switched" mode instead of in the opposite they intended. If there is a need to switch addressing modes, this can be done with the "user_mode" kernel parameter: user_mode=home Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/smp: avoid concurrent write to sigp status fieldHeiko Carstens1-6/+7
When a sigp instruction is issued it may store a status. This status is currently stored in a per cpu field of the target cpu. If multiple cpus issue a sigp instruction with the same target cpu and a status is stored the result is not necessarily as expected. Currently this is not an issue: - on cpu hotplug no sigps, except "restart" and "sense" are sent to the target cpu. - on external call we don't look at the status if it is stored - on sense running the condition code "status stored" is sufficient to tell if a cpu is running or not Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/processor: use ARRAY_SIZE instead of hard coded valueHeiko Carstens1-2/+2
Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/cache: add cpu cache information to /proc/cpuinfoHeiko Carstens3-10/+43
Add a line for each cpu cache to /proc/cpuinfo. Since we only have information of private cpu caches in sysfs we add a line for each cpu cache in /proc/cpuinfo which will also contain information about shared caches. For a z196 machine /proc/cpuinfo now looks like: vendor_id : IBM/S390 bogomips per cpu: 14367.00 features : esan3 zarch stfle msa ldisp eimm dfp etf3eh highgprs cache0 : level=1 type=Data scope=Private size=64K line_size=256 associativity=4 cache1 : level=1 type=Instruction scope=Private size=128K line_size=256 associativity=8 cache2 : level=2 type=Unified scope=Private size=1536K line_size=256 associativity=12 cache3 : level=3 type=Unified scope=Shared size=24576K line_size=256 associativity=12 cache4 : level=4 type=Unified scope=Shared size=196608K line_size=256 associativity=24 processor 0: version = FF, identification = 000123, machine = 2817 processor 1: version = FF, identification = 100123, machine = 2817 processor 2: version = FF, identification = 200123, machine = 2817 processor 3: version = FF, identification = 200123, machine = 2817 Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390: add support for transactional memoryMartin Schwidefsky14-21/+151
Allow user-space processes to use transactional execution (TX). If the TX facility is available user space programs can use transactions for fine-grained serialization based on the data objects that are referenced during a transaction. This is useful for lockless data structures and speculative compiler optimizations. Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390: add support for runtime instrumentationJan Glauber14-3/+300
Allow user-space threads to use runtime instrumentation (RI). To enable RI for a thread there is a new s390 specific system call, sys_s390_runtime_instr, that takes as parameter a realtime signal number. If the RI facility is available the system call sets up a control block for the calling thread with the appropriate permissions for the thread to modify the control block. The user-space thread can then use the store and modify RI instructions to alter the control block and start/stop the instrumentation via RION/RIOFF. If the user specified program buffer runs full RI triggers an external interrupt. The external interrupt is translated to a real-time signal that is delivered to the thread that enabled RI on that CPU. The number of the real-time signal is the number specified in the RI system call. So, user-space can select any available real-time signal number in case the application itself uses real-time signals for other purposes. The kernel saves the RI control blocks on task switch only if the running thread was enabled for RI. Therefore, the performance impact on task switch should be negligible if RI is not used. RI is only enabled for user-space mode and is disabled for the supervisor state. Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/scm_block: force cluster writesSebastian Ott5-3/+310
Force writes to Storage Class Memory (SCM) to be in done in clusters. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390: add scm block driverSebastian Ott5-0/+597
Block device driver for Storage Class Memory (SCM). This driver provides a block device interface for each available SCM increment. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/eadm_sch: add support for irq statisticsSebastian Ott3-0/+5
Add support for EADM interrupt statistics in /proc/interrupts. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/cio: add eadm subchannel driverSebastian Ott5-0/+431
This driver allows usage of EADM subchannels. EADM subchannels act as a communication vehicle for SCM increments. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390: add scm notificationSebastian Ott4-1/+74
Detect an scm change notification in store event information. Update affected scm devices and notify their drivers. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390: add scm bus driverSebastian Ott4-0/+330
Bus driver to manage Storage Class Memory. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/chsc: implement store SCM informationSebastian Ott2-0/+70
chsc_scm_info will be used to detect all available increments of storage class memory. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390: add eadm related structuresSebastian Ott4-3/+159
Add structures to be used by the eadm subchannel driver. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390: add eadm facility bitsSebastian Ott5-31/+42
Add the eadm facility bits to the css characteristics and move them to a new header. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/css: export css_sched_sch_todoSebastian Ott1-0/+1
Allow subchannel drivers build as a module to schedule subchannel work. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/zcrypt: Add support for CEX4 crypto cardHolger Dengler5-16/+170
New zcrypt module supports IBM CryptoExpress 4 cards. Signed-off-by: Holger Dengler <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/zcrypt: Separate msgtype implementation from card modules.Holger Dengler10-1124/+1707
Msgtype implementations are now separated from card specific modules and can be dynamically registered. Existing msgtype implementations are restructured in modules. Signed-off-by: Holger Dengler <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/ap: Add functiton facility information as AP device attribute.Holger Dengler3-22/+52
Add the function facility information as new ap_device and sysfs attribute. Also make the number of requests in device queue and in device driver queue accessible in sysfs. Reviewed-by: Ingo Tuchscherer <[email protected]> Signed-off-by: Holger Dengler <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/ap: configuration information exploitationHolger Dengler2-15/+128
Query AP configuration information. Improve performance of AP bus scans by skipping AP device probing, if the AP deviec is not configured. Reviewed-by: Ingo Tuchscherer <[email protected]> Signed-off-by: Holger Dengler <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/kexec: move machine_crash_shutdown() to machine_kexec.cHeiko Carstens3-15/+5
machine_crash_shutdown() was the only function in crash.c. So move the function and delete one file. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/cpu hotplug: mask out CPU_TASKS_FROZEN in cu hotplug notifiersHeiko Carstens3-7/+3
Unify all our cpu hotplug notifiers to mask out the CPU_TASKS_FROZEN bit, so we don't have to add all the *_FROZEN variant cases to the notifiers. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/smp: fix smp_find_processor_id() argument mismatchHeiko Carstens1-1/+1
For SMP and !SMP smp_find_processor_id() either takes a u16 or an unsigned int argument. Fix this so both versions take a u16. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/cpu hotplug: use hotcpu_notifier() instead of register_cpu_notifier()Heiko Carstens1-5/+1
Saves a couple of lines of code. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/kvm: Improve Kconfig help text.Cornelia Huck1-4/+5
CONFIG_S390_GUEST determines whether virtio guest drivers are built, and the virtio console is not enforced as default. Signed-off-by: Cornelia Huck <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/kconfig: split the s390 base menuJan Glauber2-191/+196
Split the base menu into more descriptive categories like processor, memory, etc. and move virtualization related entries to the Virtualization menu. Also select KEXEC unconditionally. Signed-off-by: Jan Glauber <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/cache: expose cpu cache topology via sysfsHeiko Carstens2-0/+360
Expose cpu cache topology via sysfs. The created sysfs directory structure is compatible to what x86, ia64 and powerpc have. On s390 we expose only information about cpu caches which are private to a cpu via sysfs . Caches which are shared between cpus do not have a sysfs representation. The reason for that is that the file "shared_cpu_map" is mandatory and only if running under LPAR it is possible to tell which cpus share which cache. Second level hypervisors however do not and cannot expose that information to guests. In order to have a consistent view we made the choice to always only expose information about private cpu caches via sysfs. Example for a z196 cpu (cpu1 in /sys/devices/cpu): cpu1/cache/index0/size -- 64K cpu1/cache/index0/type -- Data cpu1/cache/index0/level -- 1 cpu1/cache/index0/number_of_sets -- 64 cpu1/cache/index0/shared_cpu_map -- 00000000,00000002 cpu1/cache/index0/shared_cpu_list -- 1 cpu1/cache/index0/coherency_line_size -- 256 cpu1/cache/index0/ways_of_associativity -- 4 cpu1/cache/index1/size -- 128K cpu1/cache/index1/type -- Instruction cpu1/cache/index1/level -- 1 cpu1/cache/index1/number_of_sets -- 64 cpu1/cache/index1/shared_cpu_map -- 00000000,00000002 cpu1/cache/index1/shared_cpu_list -- 1 cpu1/cache/index1/coherency_line_size -- 256 cpu1/cache/index1/ways_of_associativity -- 8 cpu1/cache/index2/size -- 1536K cpu1/cache/index2/type -- Unified cpu1/cache/index2/level -- 2 cpu1/cache/index2/number_of_sets -- 512 cpu1/cache/index2/shared_cpu_map -- 00000000,00000002 cpu1/cache/index2/shared_cpu_list -- 1 cpu1/cache/index2/coherency_line_size -- 256 cpu1/cache/index2/ways_of_associativity -- 12 Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390: enable large page support with CONFIG_DEBUG_PAGEALLOCGerald Schaefer2-3/+1
So far, large page support was completely disabled with CONFIG_DEBUG_PAGEALLOC, although it would be sufficient if only the large page kernel mapping was disabled. This patch enables large page support with CONFIG_DEBUG_PAGEALLOC, while it prevents the large kernel mapping in that case. Signed-off-by: Gerald Schaefer <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/string: provide asm lib functions for memcpy and memcmpHeiko Carstens7-81/+213
Our memcpy and memcmp variants were implemented by calling the corresponding gcc builtin variants. However gcc is free to replace a call to __builtin_memcmp with a call to memcmp which, when called, will result in an endless recursion within memcmp. So let's provide asm variants and also fix the variants that are used for uncompressing the kernel image. In addition remove all other occurences of builtin function calls. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/bpf,jit: improve code generationHeiko Carstens1-4/+37
Make use of new immediate instructions that came with the extended immediate and general instruction extension facilities. Reviewed-by: Martin Schwidefsky <[email protected]> Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26s390/bpf,jit: BPF Just In Time compiler for s390Martin Schwidefsky7-0/+898
The s390 implementation of the JIT compiler for packet filter speedup. Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2012-09-26rcu: Settle config for userspace extended quiescent stateFrederic Weisbecker4-1/+33
Create a new config option under the RCU menu that put CPUs under RCU extended quiescent state (as in dynticks idle mode) when they run in userspace. This require some contribution from architectures to hook into kernel and userspace boundaries. Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Alessio Igor Bogani <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Avi Kivity <[email protected]> Cc: Chris Metcalf <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Geoff Levand <[email protected]> Cc: Gilad Ben Yossef <[email protected]> Cc: Hakan Akkan <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Josh Triplett <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Max Krasnyansky <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Sven-Thorsten Dietrich <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Reviewed-by: Josh Triplett <[email protected]>
2012-09-26rcu: Make RCU_FAST_NO_HZ handle adaptive ticksPaul E. McKenney1-0/+20
The current implementation of RCU_FAST_NO_HZ tries reasonably hard to rid the current CPU of RCU callbacks. This is appropriate when the CPU is entering idle, where it doesn't have much useful to do anyway, but is most definitely not what you want when transitioning to user-mode execution. This commit therefore detects the adaptive-tick case, and refrains from burning CPU time getting rid of RCU callbacks in that case. Signed-off-by: Paul E. McKenney <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Reviewed-by: Josh Triplett <[email protected]>
2012-09-26rcu: New rcu_user_enter_after_irq() and rcu_user_exit_after_irq() APIsFrederic Weisbecker2-0/+45
In some cases, it is necessary to enter or exit userspace-RCU-idle mode from an interrupt handler, for example, if some other CPU sends this CPU a resched IPI. In this case, the current CPU would enter the IPI handler in userspace-RCU-idle mode, but would need to exit the IPI handler after having exited that mode. To allow this to work, this commit adds two new APIs to TREE_RCU: - rcu_user_enter_after_irq(). This must be called from an interrupt between rcu_irq_enter() and rcu_irq_exit(). After the irq calls rcu_irq_exit(), the irq handler will return into an RCU extended quiescent state. In theory, this interrupt is never a nested interrupt, but in practice it might interrupt softirq, which looks to RCU like a nested interrupt. - rcu_user_exit_after_irq(). This must be called from a non-nesting interrupt, interrupting an RCU extended quiescent state, also between rcu_irq_enter() and rcu_irq_exit(). After the irq calls rcu_irq_exit(), the irq handler will return in an RCU non-quiescent state. [ Combined with "Allow calls to rcu_exit_user_irq from nesting irqs." ] Signed-off-by: Frederic Weisbecker <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Reviewed-by: Josh Triplett <[email protected]>
2012-09-26rcu: New rcu_user_enter() and rcu_user_exit() APIsFrederic Weisbecker2-34/+103
RCU currently insists that only idle tasks can enter RCU idle mode, which prohibits an adaptive tickless kernel (AKA nohz cpusets), which in turn would mean that usermode execution would always take scheduling-clock interrupts, even when there is only one task runnable on the CPU in question. This commit therefore adds rcu_user_enter() and rcu_user_exit(), which allow non-idle tasks to enter RCU idle mode. These are quite similar to rcu_idle_enter() and rcu_idle_exit(), respectively, except that they omit the idle-task checks. [ Updated to use "user" flag rather than separate check functions. ] [ paulmck: Updated to drop exports of new functions based on Josh's patch getting rid of the need for them. ] Signed-off-by: Frederic Weisbecker <[email protected]> Signed-off-by: Paul E. McKenney <[email protected]> Cc: Alessio Igor Bogani <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Avi Kivity <[email protected]> Cc: Chris Metcalf <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Daniel Lezcano <[email protected]> Cc: Geoff Levand <[email protected]> Cc: Gilad Ben Yossef <[email protected]> Cc: Hakan Akkan <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Max Krasnyansky <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Sven-Thorsten Dietrich <[email protected]> Cc: Thomas Gleixner <[email protected]> Reviewed-by: Josh Triplett <[email protected]>
2012-09-26x86: Unspaghettize do_trap()Frederic Weisbecker1-31/+29
Cleanup the label maze in this function. Having a seperate function to first handle the traps that don't generate a signal makes it easier to convert into more readable conditional paths. Signed-off-by: Frederic Weisbecker <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] [ Fixed 32-bit build failure. ] Signed-off-by: Ingo Molnar <[email protected]>
2012-09-26x86_64: Work around old GAS bugTao Guo2-35/+33
GAS in binutils(2.16.91) could not parse parentheses within macro parameters unless fully parenthesized, and this is a workaround to make old gas work without generating below errors: arch/x86/kernel/entry_64.S: Assembler messages: arch/x86/kernel/entry_64.S:387: Error: too many positional arguments arch/x86/kernel/entry_64.S:389: Error: too many positional arguments [...] Signed-off-by: Tao Guo <[email protected]> Reluctantly-Acked-by: Jan Beulich <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Andrew Morton <[email protected]> Link: http://lkml.kernel.org/r/[email protected] [ Jan argues that these old GAS versions are fragile - which is so, but lets give them a chance. ] Signed-off-by: Ingo Molnar <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.