Age | Commit message (Collapse) | Author | Files | Lines |
|
All callers have now been converted to call
check_move_unevictable_folios().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Remove a few hidden compound_head() calls by converting the returned page
to a folio once and using the folio APIs.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Remove a few hidden compound_head() calls by converting the returned page
to a folio once and using the folio APIs. We also only increment the
refcount on the folio once instead of once for each page. Ideally, we
would have a for_each_sgt_folio macro, but until then this will do.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This wrapper for sg_set_page() lets drivers add folios to a scatterlist
more easily. We could, perhaps, do better by using a different page in
the folio if offset is larger than UINT_MAX, but let's hope we get a
better data structure than this before we need to care about such large
folios.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
This performs the same role as __pagevec_release(), ie skipping the check
for batch length of 0.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "Remove pagevecs".
Removes a folio->page->folio conversion for each folio that's involved.
More importantly, removes one of the last few uses of a pagevec.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Commit bf75f200569d ("mm/page_alloc: add page->buddy_list and
page->pcp_list") introduces page->buddy_list and page->pcp_list as a union
with page->lru, but missed to change get_page_from_free_area() to use
page->buddy_list to clarify the correct type of list for a free page.
Link: https://lkml.kernel.org/r/7e7ab533247d40c0ea0373c18a6a48e5667f9e10.1687333557.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Now that the driver core allows for struct class to be in read-only
memory, move the bdi_class structure to be declared at build time placing
it into read-only memory, instead of having to be dynamically allocated at
load time.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ivan Orlov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Suggested-by: Greg Kroah-Hartman <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Delete a triply out-of-date comment from add_swap_count_continuation():
1. vmalloc_to_page() changed from pte_offset_map() to pte_offset_kernel()
2. pte_offset_map() changed from using kmap_atomic() to kmap_local_page()
3. kmap_atomic() changed from using fixed FIX_KMAP addresses in 2.6.37.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
early_pfn_to_nid() is called frequently in init_reserved_page(), it
returns the node id of the PFN. These PFN are probably from the same
memory region, they have the same node id. It's not necessary to call
early_pfn_to_nid() for each PFN.
Pass nid to reserve_bootmem_region() and drop the call to
early_pfn_to_nid() in init_reserved_page(). Also, set nid on all reserved
pages before doing this, as some reserved memory regions may not be set
nid.
The most beneficial function is memmap_init_reserved_pages() if
CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled.
The following data was tested on an x86 machine with 190GB of RAM.
before:
memmap_init_reserved_pages() 67ms
after:
memmap_init_reserved_pages() 20ms
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Yajun Deng <[email protected]>
Reviewed-by: Mike Rapoport (IBM) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
These routines are not intended to return zero, the callers cannot do
anything sane with a 0 return. They should return an error which means
future calls to GUP will not succeed, or they should return some non-zero
number of pinned pages which means GUP should be called again.
If start + nr_pages overflows it should return -EOVERFLOW to signal the
arguments are invalid.
Syzkaller keeps tripping on this when fuzzing GUP arguments.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jason Gunthorpe <[email protected]>
Reported-by: [email protected]
Closes: https://lore.kernel.org/all/[email protected]
Reviewed-by: John Hubbard <[email protected]>
Reviewed-by: Lorenzo Stoakes <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The per node numa_stat values for shmem don't change on page migration for
THP:
grep shmem /sys/fs/cgroup/machine.slice/.../memory.numa_stat:
shmem N0=1092616192 N1=10485760
shmem_thp N0=1092616192 N1=10485760
migratepages 9181 0 1:
shmem N0=0 N1=1103101952
shmem_thp N0=1092616192 N1=10485760
Fix that by updating shmem_thp counters likewise to shmem counters on page
migration.
[[email protected]: use folio_test_pmd_mappable instead of folio_test_transhuge]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jan Glauber <[email protected]>
Reviewed-by: Baolin Wang <[email protected]>
Cc: "Huang, Ying" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Before server got a client connection, there were some memory allocations
in the test memcg, such as user stack. So do not count those allocations
which are not related to socket when checking socket memory accounting.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Haifeng Xu <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Koutný <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Shakeel Butt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
mem_cgroup_init() request for allocations from each possible node, and
it's used to be a problem because NODE_DATA is not allocated for offline
node. Things have already changed since commit 09f49dca570a9 ("mm: handle
uninitialized numa nodes gracefully"), so it's unnecessary to check for
!node_online nodes here.
How to test?
qemu-system-x86_64 \
-kernel vmlinux \
-initrd full.rootfs.cpio.gz \
-append "console=ttyS0,115200 root=/dev/ram0 nokaslr earlyprintk=serial oops=panic panic_on_warn" \
-drive format=qcow2,file=vm_disk.qcow2,media=disk,if=ide \
-enable-kvm \
-cpu host \
-m 8G,slots=2,maxmem=16G \
-smp cores=4,threads=1,sockets=2 \
-object memory-backend-ram,id=mem0,size=4G \
-object memory-backend-ram,id=mem1,size=4G \
-numa node,memdev=mem0,cpus=0-3,nodeid=0 \
-numa node,memdev=mem1,cpus=4-7,nodeid=1 \
-numa node,nodeid=2 \
-net nic,model=virtio,macaddr=52:54:00:12:34:58 \
-net user \
-nographic \
-rtc base=localtime \
-gdb tcp::6000
Guest state when booting:
[ 0.048881] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[ 0.050489] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[ 0.052173] NODE_DATA(0) allocated [mem 0x13fffc000-0x13fffffff]
[ 0.053164] NODE_DATA(1) allocated [mem 0x23fffa000-0x23fffdfff]
[ 0.054187] Zone ranges:
[ 0.054587] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.055551] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.056515] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.057484] Movable zone start for each node
[ 0.058149] Early memory node ranges
[ 0.058705] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.059679] node 0: [mem 0x0000000000100000-0x00000000bffdffff]
[ 0.060659] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.061649] node 1: [mem 0x0000000140000000-0x000000023fffffff]
[ 0.062638] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.063745] Initmem setup node 1 [mem 0x0000000140000000-0x000000023fffffff]
[ 0.064855] DMA zone: 158 reserved pages exceeds freesize 0
[ 0.065746] Initializing node 2 as memoryless
[ 0.066437] Initmem setup node 2 as memoryless
[ 0.067132] DMA zone: 158 reserved pages exceeds freesize 0
[ 0.068037] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.068265] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.124755] On node 0, zone Normal: 32 pages in unavailable ranges
cat /sys/devices/system/node/online
0-1
cat /sys/devices/system/node/possible
0-2
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Haifeng Xu <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Shakeel Butt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
syzbot is reporting lockdep warning in __stack_depot_save(), for
the caller of __stack_depot_save() (i.e. __kasan_record_aux_stack() in
this report) is responsible for masking __GFP_KSWAPD_RECLAIM flag in
order not to wake kswapd which in turn wakes kcompactd.
Since kasan/kmsan functions might be called with arbitrary locks held,
mask __GFP_KSWAPD_RECLAIM flag from all GFP_NOWAIT/GFP_ATOMIC allocations
in kasan/kmsan.
Note that kmsan_save_stack_with_flags() is changed to mask both
__GFP_DIRECT_RECLAIM flag and __GFP_KSWAPD_RECLAIM flag, for
wakeup_kswapd() from wake_all_kswapds() from __alloc_pages_slowpath()
calls wakeup_kcompactd() if __GFP_KSWAPD_RECLAIM flag is set and
__GFP_DIRECT_RECLAIM flag is not set.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Tetsuo Handa <[email protected]>
Reported-by: syzbot <[email protected]>
Closes: https://syzkaller.appspot.com/bug?extid=ece2915262061d6e0ac1
Reviewed-by: "Huang, Ying" <[email protected]>
Reviewed-by: Alexander Potapenko <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
On some machines, the normal zone can have a large memory hole like below
memory layout, and we can see the range from 0x100000000 to 0x1800000000
is a hole. So when isolating some migratable pages, the scanner can meet
the hole and it will take more time to skip the large hole. From my
measurement, I can see the isolation scanner will take 80us ~ 100us to
skip the large hole [0x100000000 - 0x1800000000].
So adding a new helper to fast search next online memory section to skip
the large hole can help to find next suitable pageblock efficiently. With
this patch, I can see the large hole scanning only takes < 1us.
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x0000001fa7ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000000fffffffff]
[ 0.000000] node 0: [mem 0x0000001800000000-0x0000001fa3c7ffff]
[ 0.000000] node 0: [mem 0x0000001fa3c80000-0x0000001fa3ffffff]
[ 0.000000] node 0: [mem 0x0000001fa4000000-0x0000001fa402ffff]
[ 0.000000] node 0: [mem 0x0000001fa4030000-0x0000001fa40effff]
[ 0.000000] node 0: [mem 0x0000001fa40f0000-0x0000001fa73cffff]
[ 0.000000] node 0: [mem 0x0000001fa73d0000-0x0000001fa745ffff]
[ 0.000000] node 0: [mem 0x0000001fa7460000-0x0000001fa746ffff]
[ 0.000000] node 0: [mem 0x0000001fa7470000-0x0000001fa758ffff]
[ 0.000000] node 0: [mem 0x0000001fa7590000-0x0000001fa7ffffff]
[[email protected]: limit next_ptn to not exceed cc->free_pfn]
Link: https://lkml.kernel.org/r/a1d859c28af0c7e85e91795e7473f553eb180a9d.1686813379.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/75b4c8ca36bf44ad8c42bf0685ac19d272e426ec.1686705221.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <[email protected]>
Suggested-by: David Hildenbrand <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Acked-by: "Huang, Ying" <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Note the behaviour of kasan.fault=panic_on_write for async modes, since
all asynchronous faults will result in panic (even if they are reads).
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 452c03fdbed0 ("kasan: add support for kasan.fault=panic_on_write")
Signed-off-by: Marco Elver <[email protected]>
Reviewed-by: Andrey Konovalov <[email protected]>
Cc: Aleksandr Nogikh <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Andrey Ryabinin <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Taras Madan <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
|
|
Pull drm fixes from Dave Airlie:
"Very quiet last week, just two misc fixes, one dp-mst and one qaic:
qaic:
- dma-buf import fix
dp-mst:
- fix NULL ptr deref"
[ It turns out it was a quiet week because Alex Deucher hadn't sent in
his pending AMD changes. So they are coming next - Linus ]
* tag 'drm-fixes-2023-06-23' of git://anongit.freedesktop.org/drm/drm:
drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2
accel/qaic: Call DRM helper function to destroy prime GEM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The final bug fixes for Qualcomm and Rockchips came in, all of them
for devicetree files:
- Devices on Qualcomm SC7180/SC7280 that are cache coherent are now
marked so correctly to fix a regression after a change in kernel
behavior
- Rockchips has a few minor changes for correctness of regulator and
cache properties, as well as fixes for incorrect behavior of the
RK3568 PCI controller and reset pins on two boards"
* tag 'arm-fixes-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
arm64: dts: rockchip: Fix rk356x PCIe register and range mappings
arm64: dts: rockchip: fix button reset pin for nanopi r5c
arm64: dts: rockchip: fix nEXTRST on SOQuartz
arm64: dts: rockchip: add missing cache properties
arm64: dts: rockchip: fix USB regulator on ROCK64
|
|
lru_gen_rotate_memcg() can happen in softirq if memory.soft_limit_in_bytes
is set. This requires memcg_lru->lock to be irq safe. Lockdep warns on
this.
This problem only affects memcg v1.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: e4dde56cd208 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: Yu Zhao <[email protected]>
Reported-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=87c490fd2be656269b6a
Reviewed-by: Yosry Ahmed <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"Unfortunately the recent u32 overflow fix was not complete, there was
one conversion left, assertion not triggered by my tests but caught by
Qu's fstests case.
The "cleanup for later" has been promoted to a proper fix and wraps
all uses of the stripe left shift so the diffstat has grown but leaves
no potentially problematic uses.
We should have done it that way before, sorry"
* tag 'for-6.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix remaining u32 overflows when left shifting stripe_nr
|
|
Pull block fix from Jens Axboe:
"It's apparently the week of 'fixup something from last week', because
the same is true for this block pull request.
Fix up a lock grab that needs to be IRQ saving, rather than just IRQ
disabling, in the block cgroup code"
* tag 'block-6.4-2023-06-23' of git://git.kernel.dk/linux:
block: make sure local irq is disabled when calling __blkcg_rstat_flush
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
- Fix potential memory leak in AMD IOMMU domain allocation path
* tag 'iommu-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix possible memory leak of 'domain'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Three oneliner fixes: one for a thinko in SOF SoundWire code and two
HD-audio quirks for ASUS laptops. All device-specific and should be
safe to apply"
* tag 'sound-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Add quirk for ASUS ROG GV601V
ALSA: hda/realtek: Add quirk for ASUS ROG G634Z
ASoC: intel: sof_sdw: Fixup typo in device link checking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix IRQ initialization in gpiochip_irqchip_add_domain()
- add a missing return value check for platform_get_irq() in
gpio-sifive
- don't free irq_domains which GPIOLIB does not manage
* tag 'gpio-fixes-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix irq_domain resource tracking for gpiochip_irqchip_add_domain()
gpio: sifive: add missing check for platform_get_irq
gpiolib: Fix GPIO chip IRQ initialization restriction
|
|
Add sam9x7 compatible to DT bindings documentation.
Signed-off-by: Varshini Rajendran <[email protected]>
Link: https://lore.kernel.org/r/Message-Id: <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
One last Qualcomm ARM64 DeviceTree fix for v6.4
Changes related to cache management for DMA memory caused WiFi to stop
work on SC7180 and SC7280 based products, using TF-A. These changes
marks the relevant device dma-coherent to correct the behavior.
* tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
As xa_get_mark() returns false in case the entry is not present,
no need to redundantly check if vport is present. Remove the lookup.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Since mlx5_esw_query_vport_vhca_id() could be called either from
mlx5_esw_vport_enable() or mlx5_esw_vport_disable() where the
the check is done, this is always false here.
Remove the redundant check.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
is_ib_rep_supported()
is_mdev_switchdev_mode() check is done in is_eth_rep_supported().
Function is_ib_rep_supported() calls is_eth_rep_supported().
Remove the redundant check from it.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
is_ib_rep_supported()
MLX5_ESWITCH_MANAGER() check is done in is_eth_rep_supported().
Function is_ib_rep_supported() calls is_eth_rep_supported().
Remove the redundant check from it.
Signed-off-by: Jiri Pirko <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
On error flow resources being freed in esw_master_egress_destroy_resources()
but pointers not being set to null if error flow is from creating a
bounce rule. Then in esw_acl_egress_ofld_cleanup() we try to access already
freed pointers. Fix it by resetting the pointers to null.
Also if error is from creating a second or later bounce rule then the
flow group and table being used and cannot and should not be freed.
Add a check to destroy the flow group and table if there are no bounce
rules.
mlx5_core.sf mlx5_core.sf.2: mlx5_destroy_flow_group:2306:(pid 2235): Flow group 4 wasn't destroyed, refcount > 1
mlx5_core.sf mlx5_core.sf.2: mlx5_destroy_flow_table:2295:(pid 2235): Flow table 3 wasn't destroyed, refcount > 1
Fixes: 5e0202eb49ed ("net/mlx5: E-switch, Handle multiple master egress rules")
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
The function comment says what it is and the comment
is redundant.
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
When creating flow table for shared fdb resources, there is
only need to pass other_vport flag if vport is not 0 or
if the port is ECPF in BlueField.
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
To allow devcom events on E-Switch that is not a vport group manager,
use vhca id as an index instead of device index which might be shared
between several E-Switches. for example SF and its PF.
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add peer fdb rules for E-Switch that are vport managers or ecpf device.
It is not needed for other devices.
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Device index is like PF index and limited to max physical ports.
For example, SFs created under PF the device index is the PF device index.
Use vhca_id which gets the FW index per vport, for vport rx rules
and vport pair events.
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Remove duplicate function for checking if device has lag support.
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Shay Drory <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
The mlx5_is_reset_now_capable() function returns bool, not negative
error codes. So if fast teardown is not supported it should return
false instead of -EOPNOTSUPP.
Fixes: 92501fa6e421 ("net/mlx5: Ack on sync_reset_request only if PF can do reset_now")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Kalesh AP <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
A member of struct mlx5_ifc_cmd_hca_cap_bits has been mistakenly
assigned the wrong reserved_at offset value. Correct it to align to the
right value, thus avoid future miscalculation.
Signed-off-by: Lama Kayal <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Indent SFs probe code example in order to fix the below error:
Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst:57: ERROR: Unexpected indentation.
Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst:61: ERROR: Unexpected indentation.
Fixes: e71383fb9cd1 ("net/mlx5: Light probe local SFs")
Signed-off-by: Shay Drory <[email protected]>
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Reviewed-by: Automatic Verification <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
|
|
mlx5_eswitch_cleanup() is using esw right after freeing it for
releasing devlink_param.
Fix it by releasing the devlink_param before freeing the esw, and
adjust the create function accordingly.
Fixes: 3f90840305e2 ("net/mlx5: Move esw multiport devlink param to eswitch code")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Shay Drory <[email protected]>
Reviewed-by: Automatic Verification <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Dave Airlie reports that gcc-13.1.1 has started complaining about some
of the workqueue code in 32-bit arm builds:
kernel/workqueue.c: In function ‘get_work_pwq’:
kernel/workqueue.c:713:24: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
713 | return (void *)(data & WORK_STRUCT_WQ_DATA_MASK);
| ^
[ ... a couple of other cases ... ]
and while it's not immediately clear exactly why gcc started complaining
about it now, I suspect it's some C23-induced enum type handlign fixup in
gcc-13 is the cause.
Whatever the reason for starting to complain, the code and data types
are indeed disgusting enough that the complaint is warranted.
The wq code ends up creating various "helper constants" (like that
WORK_STRUCT_WQ_DATA_MASK) using an enum type, which is all kinds of
confused. The mask needs to be 'unsigned long', not some unspecified
enum type.
To make matters worse, the actual "mask and cast to a pointer" is
repeated a couple of times, and the cast isn't even always done to the
right pointer, but - as the error case above - to a 'void *' with then
the compiler finishing the job.
That's now how we roll in the kernel.
So create the masks using the proper types rather than some ambiguous
enumeration, and use a nice helper that actually does the type
conversion in one well-defined place.
Incidentally, this magically makes clang generate better code. That,
admittedly, is really just a sign of clang having been seriously
confused before, and cleaning up the typing unconfuses the compiler too.
Reported-by: Dave Airlie <[email protected]>
Link: https://lore.kernel.org/lkml/CAPM=9twNnV4zMCvrPkw3H-ajZOH-01JVh_kDrxdPYQErz8ZTdA@mail.gmail.com/
Cc: Arnd Bergmann <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
* for-next/feat_s1pie:
: Support for the Armv8.9 Permission Indirection Extensions (stage 1 only)
KVM: selftests: get-reg-list: add Permission Indirection registers
KVM: selftests: get-reg-list: support ID register features
arm64: Document boot requirements for PIE
arm64: transfer permission indirection settings to EL2
arm64: enable Permission Indirection Extension (PIE)
arm64: add encodings of PIRx_ELx registers
arm64: disable EL2 traps for PIE
arm64: reorganise PAGE_/PROT_ macros
arm64: add PTE_WRITE to PROT_SECT_NORMAL
arm64: add PTE_UXN/PTE_WRITE to SWAPPER_*_FLAGS
KVM: arm64: expose ID_AA64MMFR3_EL1 to guests
KVM: arm64: Save/restore PIE registers
KVM: arm64: Save/restore TCR2_EL1
arm64: cpufeature: add Permission Indirection Extension cpucap
arm64: cpufeature: add TCR2 cpucap
arm64: cpufeature: add system register ID_AA64MMFR3
arm64/sysreg: add PIR*_ELx registers
arm64/sysreg: update HCRX_EL2 register
arm64/sysreg: add system registers TCR2_ELx
arm64/sysreg: Add ID register ID_AA64MMFR3
|
|
'for-next/iss2-decode', 'for-next/kselftest', 'for-next/misc', 'for-next/feat_mops', 'for-next/module-alloc', 'for-next/sysreg', 'for-next/cpucap', 'for-next/acpi', 'for-next/kdump', 'for-next/acpi-doc', 'for-next/doc' and 'for-next/tpidr2-fix', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
dt-bindings: perf: fsl-imx-ddr: Add i.MX93 compatible
drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver
perf/arm_cspmu: Decouple APMT dependency
perf/arm_cspmu: Clean up ACPI dependency
ACPI/APMT: Don't register invalid resource
perf/arm_cspmu: Fix event attribute type
perf: arm_cspmu: Set irq affinitiy only if overflow interrupt is used
drivers/perf: hisi: Don't migrate perf to the CPU going to teardown
drivers/perf: apple_m1: Force 63bit counters for M2 CPUs
perf/arm-cmn: Fix DTC reset
perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robust
perf/arm-cci: Slightly optimize cci_pmu_sync_counters()
* for-next/kpti:
: Simplify KPTI trampoline exit code
arm64: entry: Simplify tramp_alias macro and tramp_exit routine
arm64: entry: Preserve/restore X29 even for compat tasks
* for-next/missing-proto-warn:
: Address -Wmissing-prototype warnings
arm64: add alt_cb_patch_nops prototype
arm64: move early_brk64 prototype to header
arm64: signal: include asm/exception.h
arm64: kaslr: add kaslr_early_init() declaration
arm64: flush: include linux/libnvdimm.h
arm64: module-plts: inline linux/moduleloader.h
arm64: hide unused is_valid_bugaddr()
arm64: efi: add efi_handle_corrupted_x18 prototype
arm64: cpuidle: fix #ifdef for acpi functions
arm64: kvm: add prototypes for functions called in asm
arm64: spectre: provide prototypes for internal functions
arm64: move cpu_suspend_set_dbg_restorer() prototype to header
arm64: avoid prototype warnings for syscalls
arm64: add scs_patch_vmlinux prototype
arm64: xor-neon: mark xor_arm64_neon_*() static
* for-next/iss2-decode:
: Add decode of ISS2 to data abort reports
arm64/esr: Add decode of ISS2 to data abort reporting
arm64/esr: Use GENMASK() for the ISS mask
* for-next/kselftest:
: Various arm64 kselftest improvements
kselftest/arm64: Log signal code and address for unexpected signals
kselftest/arm64: Add a smoke test for ptracing hardware break/watch points
* for-next/misc:
: Miscellaneous patches
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
arm64: hibernate: remove WARN_ON in save_processor_state
arm64/fpsimd: Exit streaming mode when flushing tasks
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
arm64: consolidate rox page protection logic
arm64: set __exception_irq_entry with __irq_entry as a default
arm64: syscall: unmask DAIF for tracing status
arm64: lockdep: enable checks for held locks when returning to userspace
arm64/cpucaps: increase string width to properly format cpucaps.h
arm64/cpufeature: Use helper for ECV CNTPOFF cpufeature
* for-next/feat_mops:
: Support for ARMv8.8 memcpy instructions in userspace
kselftest/arm64: add MOPS to hwcap test
arm64: mops: allow disabling MOPS from the kernel command line
arm64: mops: detect and enable FEAT_MOPS
arm64: mops: handle single stepping after MOPS exception
arm64: mops: handle MOPS exceptions
KVM: arm64: hide MOPS from guests
arm64: mops: don't disable host MOPS instructions from EL2
arm64: mops: document boot requirements for MOPS
KVM: arm64: switch HCRX_EL2 between host and guest
arm64: cpufeature: detect FEAT_HCX
KVM: arm64: initialize HCRX_EL2
* for-next/module-alloc:
: Make the arm64 module allocation code more robust (clean-up, VA range expansion)
arm64: module: rework module VA range selection
arm64: module: mandate MODULE_PLTS
arm64: module: move module randomization to module.c
arm64: kaslr: split kaslr/module initialization
arm64: kasan: remove !KASAN_VMALLOC remnants
arm64: module: remove old !KASAN_VMALLOC logic
* for-next/sysreg: (21 commits)
: More sysreg conversions to automatic generation
arm64/sysreg: Convert TRBIDR_EL1 register to automatic generation
arm64/sysreg: Convert TRBTRG_EL1 register to automatic generation
arm64/sysreg: Convert TRBMAR_EL1 register to automatic generation
arm64/sysreg: Convert TRBSR_EL1 register to automatic generation
arm64/sysreg: Convert TRBBASER_EL1 register to automatic generation
arm64/sysreg: Convert TRBPTR_EL1 register to automatic generation
arm64/sysreg: Convert TRBLIMITR_EL1 register to automatic generation
arm64/sysreg: Rename TRBIDR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBTRG_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBMAR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBSR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBBASER_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBPTR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBLIMITR_EL1 fields per auto-gen tools format
arm64/sysreg: Convert OSECCR_EL1 to automatic generation
arm64/sysreg: Convert OSDTRTX_EL1 to automatic generation
arm64/sysreg: Convert OSDTRRX_EL1 to automatic generation
arm64/sysreg: Convert OSLAR_EL1 to automatic generation
arm64/sysreg: Standardise naming of bitfield constants in OSL[AS]R_EL1
arm64/sysreg: Convert MDSCR_EL1 to automatic register generation
...
* for-next/cpucap:
: arm64 cpucap clean-up
arm64: cpufeature: fold cpus_set_cap() into update_cpu_capabilities()
arm64: cpufeature: use cpucap naming
arm64: alternatives: use cpucap naming
arm64: standardise cpucap bitmap names
* for-next/acpi:
: Various arm64-related ACPI patches
ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()
* for-next/kdump:
: Simplify the crashkernel reservation behaviour of crashkernel=X,high on arm64
arm64: add kdump.rst into index.rst
Documentation: add kdump.rst to present crashkernel reservation on arm64
arm64: kdump: simplify the reservation behaviour of crashkernel=,high
* for-next/acpi-doc:
: Update ACPI documentation for Arm systems
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
* for-next/doc:
: arm64 documentation updates
Documentation/arm64: Add ptdump documentation
* for-next/tpidr2-fix:
: Fix the TPIDR2_EL0 register restoring on sigreturn
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
|
|
Due to the fact that TPIDR2 is intended to be managed by libc we don't
currently test modifying it via the signal context since that might
disrupt libc's usage of it and cause instability. We can however test the
opposite case with less risk, modifying TPIDR2 in a signal handler and
making sure that the original value is restored after returning from the
signal handler. Add a test which does this.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/20230621-arm64-fix-tpidr2-signal-restore-v2-2-c8e8fcc10302@kernel.org
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Currently when restoring the TPIDR2 signal context we set the new value
from the signal frame in the thread data structure but not the register,
following the pattern for the rest of the data we are restoring. This does
not work in the case of TPIDR2, the register always has the value for the
current task. This means that either we return to userspace and ignore the
new value or we context switch and save the register value on top of the
newly restored value.
Load the value from the signal context into the register instead.
Fixes: 39e54499280f ("arm64/signal: Include TPIDR2 in the signal context")
Signed-off-by: Mark Brown <[email protected]>
Cc: <[email protected]> # 6.3.x
Link: https://lore.kernel.org/r/20230621-arm64-fix-tpidr2-signal-restore-v2-1-c8e8fcc10302@kernel.org
Signed-off-by: Catalin Marinas <[email protected]>
|
|
|
|
Signed-off-by: Baruch Siach <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/0b2967c4a4141875c493e835d5a6f8f2d19ae2d6.1687499804.git.baruch@tkos.co.il
|