aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-08-08fsi: sbefifo: Bump max command lengthBenjamin Herrenschmidt1-7/+32
Otherwise cronus putmem fails istep and BML fails to upload skiboot To do that, we still use our one-page command buffer for small commands for speed, and for anything bigger, with a limit of 1MB plus a page, we vmalloc a temporary buffer. The limit was chosen because Cronus will break up any data transfer into 1M chunks (the extra page is for the command header). Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Andrew Jeffery <[email protected]>
2018-08-06fsi: scom: Fix NULL dereferenceBenjamin Herrenschmidt1-0/+1
The chardev conversion forgot to copy the fsi_dev, silly mistake, compounded by a testing mistake on my side, this specific driver wasn't being tested properly. Fixes: d8f4587655f9 "fsi: scom: Convert to use the new chardev" Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-27fsi: Prevent multiple concurrent rescansBenjamin Herrenschmidt2-2/+16
The bus scanning process isn't terribly good at parallel attempts at rescanning the same bus. Let's have a per-master mutex protecting the scanning process. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-27fsi: Add cfam char devicesBenjamin Herrenschmidt1-51/+213
This aims to deprecate the "raw" sysfs file used for directly accessing the CFAM and instead use a char device like the other sub drivers. Since it reworks the slave creation code and adds a cfam device type, we also use the opportunity to convert the attributes to attribute groups and add a couple more. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-27fsi: scom: Convert to use the new chardevBenjamin Herrenschmidt1-50/+80
This converts FSI scom to use the new fsi-core controlled chardev allocator and use a real cdev instead of a miscdev. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-27fsi: sbefifo: Convert to use the new chardevBenjamin Herrenschmidt1-29/+55
This converts FSI sbefifo to use the new fsi-core controlled chardev allocator and use a real cdev instead of a miscdev. One side effect is to fix the object lifetime by removing the use of devm_kzalloc() for something that contains kobjects, and using proper reference counting. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-27fsi: Add new central chardev supportBenjamin Herrenschmidt3-3/+119
The various FSI devices (sbefifo, occ, scom, more to come) currently use misc devices. This is problematic as the minor device space for misc is limited and there can be a lot of them. Also it limits our ability to move them to a dedicated /dev/fsi directory or to be smart about device naming and numbering. It also means we have IDAs on every single of these drivers This creates a common fsi "device_type" for the optional /dev/fsi grouping and a dev_t allocator for all FSI devices. "Legacy" devices get to use a backward compatible numbering scheme (as long as chip id <16 and there's only one copy of a given unit type per chip). A single major number and a single IDA are shared for all FSI devices. This doesn't convert the FSI device drivers to use the new scheme yet, they will be converted individually. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-26fsi: master-ast-cf: Rename dump_trace() to avoid name collisionBenjamin Herrenschmidt1-5/+5
s390 defines a global dump_trace() symbol. Rename ours to dump_ucode_trace() to avoid a collision in build tests. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-26fsi: master-ast-cf: Fix memory leakGustavo A. R. Silva1-2/+4
In case memory resources for *fw* were allocated, release them before return. Addresses-Coverity-ID: 1472044 ("Resource leak") Fixes: 6a794a27daca ("fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire") Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-25fsi: master-ast-cf: Mask unused bits in RTAG/RCRCBenjamin Herrenschmidt1-2/+2
Then reading the RTAG/RCRC "registers" from the coprocessor after a command is complete, mask out the top bits, only keep the relevant bits. Microcode v5 will leave garbage in those top bits as a result of a performance optimization. Signed-off-by: Benjamin Herrenschmidt <[email protected]> ---
2018-07-24fsi: master-ast-cf: Fix build warnings on 64-bit platformsBenjamin Herrenschmidt1-2/+2
A couple of places forgot the 'z' qualifier for dev_dbg when printing a size_t Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-23fsi: Add support for device-tree provided chip IDsBenjamin Herrenschmidt1-0/+24
They get retrieved from the device-tree and exposed as an attribute in sysfs Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-23dt-bindings: fsi: Add optional chip-id to CFAMsBenjamin Herrenschmidt1-0/+5
This represents a physical chip in the system and allows a stable numbering scheme to be passed to udev for userspace to recognize which chip is which. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Acked-by: Rob Herring <[email protected]>
2018-07-23fsi: sbefifo: Fix inconsistent use of ffdc mutexBenjamin Herrenschmidt1-4/+9
Some of the exit path missed the unlock. Move the mutex to an outer function to avoid the problem completely Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-23fsi: master-ast-cf: Add new FSI master using Aspeed ColdFireBenjamin Herrenschmidt5-0/+1755
The Aspeed AST2x00 can contain a ColdFire v1 coprocessor which is currently unused on OpenPower systems. This adds an alternative to the fsi-master-gpio driver that uses that coprocessor instead of bit banging from the ARM core itself. The end result is about 4 times faster. The firmware for the coprocessor and its source code can be found at https://github.com/ozbenh/cf-fsi and is system specific. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-23dt-bindings: fsi: Document binding for the fsi-master-ast-cf "device"Benjamin Herrenschmidt1-0/+36
This isn't per-se a real device, it's a pseudo-device that represents the use of the Aspeed built-in ColdFire to implement the FSI protocol by bitbanging the GPIOs instead of doing it from the ARM core. Thus it's a drop-in replacement for the existing fsi-master-gpio pseudo-device for use on systems based on the Aspeed chips. It has most of the same properties, plus some more needed to operate the coprocessor. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Rob Herring <[email protected]>
2018-07-23devres: Add devm_of_iomap()Benjamin Herrenschmidt2-0/+40
There are still quite a few cases where a device might want to get to a different node of the device-tree, obtain the resources and map them. We have of_iomap() and of_io_request_and_map() but they both have shortcomings, such as not returning the size of the resource found (which can be useful) and not being "managed". This adds a devm_of_iomap() that provides all of these and should probably replace uses of the above in most drivers. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Joel Stanley <[email protected]>
2018-07-23Merge remote-tracking branch 'gpio/ib-aspeed' into upstream-readyBenjamin Herrenschmidt2554-20955/+29499
Merge the GPIO tree "ib-aspeed" topic branch which contains pre-requisites for subsequent changes. This branch is also in gpio "next".
2018-07-12fsi: Move various master definitions to a common headerBenjamin Herrenschmidt2-29/+33
This moves the definitions for various protocol details (message & response codes, delays etc...) out of fsi-master-gpio.c to fsi-master.h in order to share them with other master implementations. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]>
2018-07-12fsi: master-gpio: Add missing release functionBenjamin Herrenschmidt1-18/+35
The embedded struct device needs a release function to be able to successfully remove the driver. We remove the devm_gpiod_put() as they are unnecessary (the resources will be released automatically) and because fsi_master_unregister() will cause the master structure to be freed. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]>
2018-07-12fsi: Don't use device_unregister() in fsi_master_register()Benjamin Herrenschmidt1-5/+2
In the error path of fsi_master_register(), we currently use device_unregister(). This will cause the last reference to the structure to be dropped, thus freeing the enclosing structure, which isn't what the callers want. Use device_del() instead so that we return to the caller with a refcount of 1. The caller can then assume that it must use put_device() after a call to fsi_master_register() regardless of whether the latter suceeded or failed. Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-12fsi: master-gpio: Remove "GPIO" prefix on some definitionsBenjamin Herrenschmidt1-34/+36
Some definitions are generic to the FSI protocol or any give master implementation. Rename them to remove the "GPIO" prefix in preparation for moving them to a common header. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]> # Conflicts: # drivers/fsi/fsi-master-gpio.c
2018-07-12fsi: master-gpio: Remove unused definitionsBenjamin Herrenschmidt1-6/+0
Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]>
2018-07-12fsi: master-gpio: Add more tracepointsBenjamin Herrenschmidt2-6/+69
This adds a few more tracepoints that have proven useful when debugging issues with the FSI bus. This also makes echo_delay() use clock_zeros() instead of open-code it in order to share the tracepoint. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]>
2018-07-12fsi: master-gpio: Add support for link_configBenjamin Herrenschmidt1-2/+25
To configure the send and echo delays Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]>
2018-07-12fsi: master-gpio: Rename and adjust send delayBenjamin Herrenschmidt1-3/+6
What the driver called "FSI_GPIO_PRIME_SLAVE_CLOCKS" is what the FSI spec calls tSendDelay and should be 16 clocks by default. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]>
2018-07-12fsi: Add mechanism to set the tSendDelay and tEchoDelay valuesBenjamin Herrenschmidt2-18/+93
Those values control the amount of "dummy" clocks between commands and between a command and its response. This adds a way to configure them from sysfs (to be later extended to defaults in the device-tree). The default remains 16 (the HW default). This is only supported if the backend supports the new link_config() callback to configure the generation of those delays. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]> ---
2018-07-12fsi: Move code around to avoid forward declarationBenjamin Herrenschmidt1-48/+46
Move fsi_slave_set_smode() and its helpers to before it's first user and remove the corresponding forward declaration. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]>
2018-07-12fsi: sbefifo: Fix checker warning about late NULL checkBenjamin Herrenschmidt1-2/+5
"dev" is dereferences before it's checked. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-12fsi/sbefifo: Add dependency on OF_ADDRESSGuenter Roeck1-0/+1
The driver calls of_platform_device_create() which is only available if OF_ADDRESS is enabled. When building sparc64 images, this results in ERROR: "of_platform_device_create" [drivers/fsi/fsi-sbefifo.ko] undefined! Fixes: 9f4a8a2d7f9d ("fsi/sbefifo: Add driver for the SBE FIFO") Cc: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-12fsi: sbefifo: Add missing mutex_unlockEddie James1-0/+1
There was no unlock of the FFDC mutex. Fixes: 9f4a8a2d7f9d ("fsi/sbefifo: Add driver for the SBE FIFO") Signed-off-by: Eddie James <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-07-02gpio: aspeed: Add interfaces for co-processor to grab GPIOsBenjamin Herrenschmidt2-20/+246
On the Aspeed chip, the GPIOs can be under control of the ARM chip or of the ColdFire coprocessor. (There's a third command source, the LPC bus, which we don't use or support yet). The control of which master is allowed to modify a given GPIO is per-bank (8 GPIOs). Unfortunately, systems already exist for which we want to use GPIOs of both sources in the same bank. This provides an API exported by the gpio-aspeed driver that an aspeed coprocessor driver can use to "grab" some GPIOs for use by the coprocessor, and allow the coprocessor driver to provide callbacks for arbitrating access. Once at least one GPIO of a given bank has been "grabbed" by the coprocessor, the entire bank is marked as being under coprocessor control. It's command source is switched to the coprocessor. If the ARM then tries to write to a GPIO in such a marked bank, the provided callbacks are used to request access from the coprocessor driver, which is responsible to doing whatever is necessary to "pause" the coprocessor or prevent it from trying to use the GPIOs while the ARM is doing its accesses. During that time, the command source for the bank is temporarily switched back to the ARM. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Reviewed-by: Andrew Jeffery <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-07-02gpio: aspeed: Add command source registersBenjamin Herrenschmidt1-0/+54
This adds the definitions for the command source registers and a helper to set them. Those registers allow to control which bus master on the SoC is allowed to modify a given bank of GPIOs and will be used by subsequent patches. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Reviewed-by: Andrew Jeffery <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-07-02gpio: aspeed: Add "Read Data" register to read the write latchBenjamin Herrenschmidt1-2/+27
The Aspeed GPIO hardware has a quirk: the value register, for an output GPIO, doesn't contain the last value written (the write latch content) but the sampled input value. This means that when reading back shortly after writing, you can get an incorrect value as the input value is delayed by a few synchronizers. The HW supports a separate read-only register "Data Read Register" which allows you to read the write latch instead. This adds the definition for it, and uses it for the initial population of the GPIO value cache. It will be used more in subsequent patches. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Reviewed-by: Andrew Jeffery <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-07-02gpio: aspeed: Rework register type accessorsBenjamin Herrenschmidt1-49/+69
Use a single accessor function for all register types instead of several spread around. This will make it easier/cleaner to introduce new registers and keep the mechanism in one place. The big switch/case is optimized at compile time since the switch value is a constant. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Reviewed-by: Andrew Jeffery <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-06-18fsi: scom: Major overhaulBenjamin Herrenschmidt2-30/+452
This was too hard to split ... this adds a number of features to the SCOM user interface: - Support for indirect SCOMs - read()/write() interface now handle errors and retries - New ioctl() "raw" interface for use by debuggers Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Eddie James <[email protected]> Reviewed-by: Alistair Popple <[email protected]>
2018-06-18fsi: scom: Add register definitionsBenjamin Herrenschmidt1-1/+18
Add a few more register and bit definitions, also define and use SCOM_READ_CMD (which is 0 but it makes the code clearer) Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Eddie James <[email protected]>
2018-06-18fsi: scom: Fixup endian annotationsBenjamin Herrenschmidt1-5/+4
Use the proper annotated type __be32 and fixup the accessor used for get_scom() Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Eddie James <[email protected]>
2018-06-18fsi: scom: Whitespace fixesBenjamin Herrenschmidt1-4/+4
No functional changes Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Eddie James <[email protected]>
2018-06-18fsi: scom: Add mutex around FSI2PIB accessesBenjamin Herrenschmidt1-7/+18
Otherwise, multiple clients can open the driver and attempt to access the PIB at the same time, thus clobbering each other in the process. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Eddie James <[email protected]>
2018-06-18fsi: core: Fix sparse warningsJoel Stanley1-10/+13
fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:210:9: warning: cast to restricted __be32 fsi-core.c:606:15: warning: incorrect type in assignment (different base types) fsi-core.c:606:15: expected unsigned int [unsigned] [assigned] [usertype] smode fsi-core.c:606:15: got restricted __be32 [usertype] <noident> fsi-core.c:492:28: warning: expression using sizeof(void) fsi-core.c:520:29: warning: expression using sizeof(void) fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:682:19: warning: cast to restricted __be32 fsi-core.c:706:24: warning: incorrect type in assignment (different base types) fsi-core.c:706:24: expected unsigned int [unsigned] [usertype] llmode fsi-core.c:706:24: got restricted __be32 [usertype] <noident> Signed-off-by: Joel Stanley <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-06-18fsi: master-hub: Fix sparse warningsJoel Stanley1-2/+3
fsi-master-hub.c:128:13: warning: incorrect type in assignment (different base types) fsi-master-hub.c:128:13: expected unsigned int [unsigned] [usertype] cmd fsi-master-hub.c:128:13: got restricted __be32 [usertype] <noident> fsi-master-hub.c:208:13: warning: incorrect type in assignment (different base types) fsi-master-hub.c:208:13: expected restricted __be32 [addressable] [assigned] [usertype] reg fsi-master-hub.c:208:13: got int Signed-off-by: Joel Stanley <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-06-18fsi: sbefifo: Fix sparse warningsJoel Stanley1-2/+3
fsi-sbefifo.c:547:58: warning: incorrect type in argument 2 (different base types) fsi-sbefifo.c:547:58: expected restricted __be32 [usertype] *word fsi-sbefifo.c:547:58: got unsigned int *<noident> fsi-sbefifo.c:635:16: warning: incorrect type in assignment (different base types) fsi-sbefifo.c:635:16: expected unsigned int [unsigned] <noident> fsi-sbefifo.c:635:16: got restricted __be32 [usertype] <noident> fsi-sbefifo.c:636:16: warning: incorrect type in assignment (different base types) fsi-sbefifo.c:636:16: expected unsigned int [unsigned] <noident> fsi-sbefifo.c:636:16: got restricted __be32 [usertype] <noident> Signed-off-by: Joel Stanley <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2018-06-17Linux 4.18-rc1Linus Torvalds1-2/+2
2018-06-17Merge tag 'for-linus-20180616' of git://git.kernel.dk/linux-blockLinus Torvalds16-275/+174
Pull block fixes from Jens Axboe: "A collection of fixes that should go into -rc1. This contains: - bsg_open vs bsg_unregister race fix (Anatoliy) - NVMe pull request from Christoph, with fixes for regressions in this window, FC connect/reconnect path code unification, and a trace point addition. - timeout fix (Christoph) - remove a few unused functions (Christoph) - blk-mq tag_set reinit fix (Roman)" * tag 'for-linus-20180616' of git://git.kernel.dk/linux-block: bsg: fix race of bsg_open and bsg_unregister block: remov blk_queue_invalidate_tags nvme-fabrics: fix and refine state checks in __nvmf_check_ready nvme-fabrics: handle the admin-only case properly in nvmf_check_ready nvme-fabrics: refactor queue ready check blk-mq: remove blk_mq_tagset_iter nvme: remove nvme_reinit_tagset nvme-fc: fix nulling of queue data on reconnect nvme-fc: remove reinit_request routine blk-mq: don't time out requests again that are in the timeout handler nvme-fc: change controllers first connect to use reconnect path nvme: don't rely on the changed namespace list log nvmet: free smart-log buffer after use nvme-rdma: fix error flow during mapping request data nvme: add bio remapping tracepoint nvme: fix NULL pointer dereference in nvme_init_subsystem blk-mq: reinit q->tag_set_list entry only after grace period
2018-06-17Merge tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimentalLinus Torvalds206-339/+372
Pull documentation fixes from Mauro Carvalho Chehab: "This solves a series of broken links for files under Documentation, and improves a script meant to detect such broken links (see scripts/documentation-file-ref-check). The changes on this series are: - can.rst: fix a footnote reference; - crypto_engine.rst: Fix two parsing warnings; - Fix a lot of broken references to Documentation/*; - improve the scripts/documentation-file-ref-check script, in order to help detecting/fixing broken references, preventing false-positives. After this patch series, only 33 broken references to doc files are detected by scripts/documentation-file-ref-check" * tag 'docs-broken-links' of git://linuxtv.org/mchehab/experimental: (26 commits) fix a series of Documentation/ broken file name references Documentation: rstFlatTable.py: fix a broken reference ABI: sysfs-devices-system-cpu: remove a broken reference devicetree: fix a series of wrong file references devicetree: fix name of pinctrl-bindings.txt devicetree: fix some bindings file names MAINTAINERS: fix location of DT npcm files MAINTAINERS: fix location of some display DT bindings kernel-parameters.txt: fix pointers to sound parameters bindings: nvmem/zii: Fix location of nvmem.txt docs: Fix more broken references scripts/documentation-file-ref-check: check tools/*/Documentation scripts/documentation-file-ref-check: get rid of false-positives scripts/documentation-file-ref-check: hint: dash or underline scripts/documentation-file-ref-check: add a fix logic for DT scripts/documentation-file-ref-check: accept more wildcards at filenames scripts/documentation-file-ref-check: fix help message media: max2175: fix location of driver's companion documentation media: v4l: fix broken video4linux docs locations media: dvb: point to the location of the old README.dvb-usb file ...
2018-06-17Merge tag 'fsnotify_for_v4.18-rc1' of ↵Linus Torvalds14-147/+230
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fsnotify updates from Jan Kara: "fsnotify cleanups unifying handling of different watch types. This is the shortened fsnotify series from Amir with the last five patches pulled out. Amir has modified those patches to not change struct inode but obviously it's too late for those to go into this merge window" * tag 'fsnotify_for_v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fsnotify: add fsnotify_add_inode_mark() wrappers fanotify: generalize fanotify_should_send_event() fsnotify: generalize send_to_group() fsnotify: generalize iteration of marks by object type fsnotify: introduce marks iteration helpers fsnotify: remove redundant arguments to handle_event() fsnotify: use type id to identify connector object type
2018-06-17Merge tag 'fbdev-v4.18' of git://github.com/bzolnier/linuxLinus Torvalds50-2986/+87
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "There is nothing really major here, few small fixes, some cleanups and dead drivers removal: - mark omapfb drivers as orphans in MAINTAINERS file (Tomi Valkeinen) - add missing module license tags to omap/omapfb driver (Arnd Bergmann) - add missing GPIOLIB dependendy to omap2/omapfb driver (Arnd Bergmann) - convert savagefb, aty128fb & radeonfb drivers to use msleep & co. (Jia-Ju Bai) - allow COMPILE_TEST build for viafb driver (media part was reviewed by media subsystem Maintainer) - remove unused MERAM support from sh_mobile_lcdcfb and shmob-drm drivers (drm parts were acked by shmob-drm driver Maintainer) - remove unused auo_k190xfb drivers - misc cleanups (Souptick Joarder, Wolfram Sang, Markus Elfring, Andy Shevchenko, Colin Ian King)" * tag 'fbdev-v4.18' of git://github.com/bzolnier/linux: (26 commits) fb_omap2: add gpiolib dependency video/omap: add module license tags MAINTAINERS: make omapfb orphan video: fbdev: pxafb: match_string() conversion fixup video: fbdev: nvidia: fix spelling mistake: "scaleing" -> "scaling" video: fbdev: fix spelling mistake: "frambuffer" -> "framebuffer" video: fbdev: pxafb: Convert to use match_string() helper video: fbdev: via: allow COMPILE_TEST build video: fbdev: remove unused sh_mobile_meram driver drm: shmobile: remove unused MERAM support video: fbdev: sh_mobile_lcdcfb: remove unused MERAM support video: fbdev: remove unused auo_k190xfb drivers video: omap: Improve a size determination in omapfb_do_probe() video: sm501fb: Improve a size determination in sm501fb_probe() video: fbdev-MMP: Improve a size determination in path_init() video: fbdev-MMP: Delete an error message for a failed memory allocation in two functions video: auo_k190x: Delete an error message for a failed memory allocation in auok190x_common_probe() video: sh_mobile_lcdcfb: Delete an error message for a failed memory allocation in two functions video: sh_mobile_meram: Delete an error message for a failed memory allocation in sh_mobile_meram_probe() video: fbdev: sh_mobile_meram: Drop SUPERH platform dependency ...
2018-06-16Merge branch 'afs-proc' of ↵Linus Torvalds22-645/+892
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "Assorted AFS stuff - ended up in vfs.git since most of that consists of David's AFS-related followups to Christoph's procfs series" * 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Optimise callback breaking by not repeating volume lookup afs: Display manually added cells in dynamic root mount afs: Enable IPv6 DNS lookups afs: Show all of a server's addresses in /proc/fs/afs/servers afs: Handle CONFIG_PROC_FS=n proc: Make inline name size calculation automatic afs: Implement network namespacing afs: Mark afs_net::ws_cell as __rcu and set using rcu functions afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus() proc: Add a way to make network proc files writable afs: Rearrange fs/afs/proc.c to remove remaining predeclarations. afs: Rearrange fs/afs/proc.c to move the show routines up afs: Rearrange fs/afs/proc.c by moving fops and open functions down afs: Move /proc management functions to the end of the file
2018-06-16Merge branch 'work.compat' of ↵Linus Torvalds3-136/+112
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull compat updates from Al Viro: "Some biarch patches - getting rid of assorted (mis)uses of compat_alloc_user_space(). Not much in that area this cycle..." * 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: orangefs: simplify compat ioctl handling signalfd: lift sigmask copyin and size checks to callers of do_signalfd4() vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart
Powered by cgit, Gruvboxed by Blaster4385.