| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The driver uses __napi_schedule_irqoff() which is fine as long as it is
invoked with disabled interrupts by everybody. Since the commit
mentioned below the driver may invoke xgbe_isr_task() in tasklet/softirq
context. This may lead to list corruption if another driver uses
__napi_schedule_irqoff() in IRQ context.
Use __napi_schedule() which safe to use from IRQ and softirq context.
Fixes: 85b85c853401d ("amd-xgbe: Re-issue interrupt if interrupt status not cleared")
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Acked-by: Tom Lendacky <[email protected]>
Cc: Tom Lendacky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix the following sparse warning:
drivers/isdn/hardware/mISDN/mISDNisar.c:746:12: warning: symbol 'dmril'
was not declared. Should it be static?
drivers/isdn/hardware/mISDN/mISDNisar.c:749:12: warning: symbol 'dmrim'
was not declared. Should it be static?
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
After commit bfcb813203e619a8960a819bf533ad2a108d8105 ("net: dsa:
configure the MTU for switch ports") my Lamobo R1 platform which uses
an allwinner,sun7i-a20-gmac compatible Ethernet MAC started to fail
by rejecting a MTU of 1536. The reason for that is that the DMA
capabilities are not readable on this version of the IP, and there
is also no 'tx-fifo-depth' property being provided in Device Tree. The
property is documented as optional, and is not provided.
Chen-Yu indicated that the FIFO sizes are 4KB for TX and 16KB for RX, so
provide these values through platform data as an immediate fix until
various Device Tree sources get updated accordingly.
Fixes: eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values")
Suggested-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Acked-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In VLAN-unaware mode, the Egress Tag (EG_TAG) field in Port VLAN
Control register must be set to Consistent to let tagged frames pass
through as is, otherwise their tags will be stripped.
Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Tested-by: René van Dorst <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
According to https://www.analog.com/, the company name is spelled
"Analog Devices".
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fix from Paul Moore:
"One small SELinux fix to ensure we cleanup properly on an error
condition"
* tag 'selinux-pr-20200416' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: free str on error in str_read()
|
|
Pull ceph fixes from Ilya Dryomov:
- a set of patches for a deadlock on "rbd map" error path
- a fix for invalid pointer dereference and uninitialized variable use
on asynchronous create and unlink error paths.
* tag 'ceph-for-5.7-rc2' of git://github.com/ceph/ceph-client:
ceph: fix potential bad pointer deref in async dirops cb's
rbd: don't mess with a page vector in rbd_notify_op_lock()
rbd: don't test rbd_dev->opts in rbd_dev_image_release()
rbd: call rbd_dev_unprobe() after unwatching and flushing notifies
rbd: avoid a deadlock on header_rwsem when flushing notifies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This fixes a small race between allocating a snapshot buffer and
setting the snapshot trigger.
On a slow machine, the trigger can occur before the snapshot is
allocated causing a warning to be displayed in the ring buffer, and no
snapshot triggering. Reversing the allocation and the enabling of the
trigger fixes the problem"
* tag 'trace-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation
|
|
If seq_file .next function does not change position index,
read after some lseek can generate unexpected output:
$ dd if=/proc/keys bs=1 # full usual output
0f6bfdf5 I--Q--- 2 perm 3f010000 1000 1000 user 4af2f79ab8848d0a: 740
1fb91b32 I--Q--- 3 perm 1f3f0000 1000 65534 keyring _uid.1000: 2
27589480 I--Q--- 1 perm 0b0b0000 0 0 user invocation_id: 16
2f33ab67 I--Q--- 152 perm 3f030000 0 0 keyring _ses: 2
33f1d8fa I--Q--- 4 perm 3f030000 1000 1000 keyring _ses: 1
3d427fda I--Q--- 2 perm 3f010000 1000 1000 user 69ec44aec7678e5a: 740
3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1
521+0 records in
521+0 records out
521 bytes copied, 0,00123769 s, 421 kB/s
But a read after lseek in middle of last line results in the partial
last line and then a repeat of the final line:
$ dd if=/proc/keys bs=500 skip=1
dd: /proc/keys: cannot skip to specified offset
g _uid_ses.1000: 1
3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1
0+1 records in
0+1 records out
97 bytes copied, 0,000135035 s, 718 kB/s
and a read after lseek beyond end of file results in the last line being
shown:
$ dd if=/proc/keys bs=1000 skip=1 # read after lseek beyond end of file
dd: /proc/keys: cannot skip to specified offset
3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1
0+1 records in
0+1 records out
76 bytes copied, 0,000119981 s, 633 kB/s
See https://bugzilla.kernel.org/show_bug.cgi?id=206283
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...")
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Cc: [email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add Intel Comet Lake PCH-U PCI ID to the list of supported controllers.
Set default SATA LPM so the SoC can enter S0ix.
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
If in blk_mq_dispatch_rq_list() we find no budget, then we break of the
dispatch loop, but the request may keep the driver tag, evaulated
in 'nxt' in the previous loop iteration.
Fix by putting the driver tag for that request.
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: John Garry <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
syzbot writes:
> KASAN: use-after-free Read in dput (2)
>
> proc_fill_super: allocate dentry failed
> ==================================================================
> BUG: KASAN: use-after-free in fast_dput fs/dcache.c:727 [inline]
> BUG: KASAN: use-after-free in dput+0x53e/0xdf0 fs/dcache.c:846
> Read of size 4 at addr ffff88808a618cf0 by task syz-executor.0/8426
>
> CPU: 0 PID: 8426 Comm: syz-executor.0 Not tainted 5.6.0-next-20200412-syzkaller #0
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
> Call Trace:
> __dump_stack lib/dump_stack.c:77 [inline]
> dump_stack+0x188/0x20d lib/dump_stack.c:118
> print_address_description.constprop.0.cold+0xd3/0x315 mm/kasan/report.c:382
> __kasan_report.cold+0x35/0x4d mm/kasan/report.c:511
> kasan_report+0x33/0x50 mm/kasan/common.c:625
> fast_dput fs/dcache.c:727 [inline]
> dput+0x53e/0xdf0 fs/dcache.c:846
> proc_kill_sb+0x73/0xf0 fs/proc/root.c:195
> deactivate_locked_super+0x8c/0xf0 fs/super.c:335
> vfs_get_super+0x258/0x2d0 fs/super.c:1212
> vfs_get_tree+0x89/0x2f0 fs/super.c:1547
> do_new_mount fs/namespace.c:2813 [inline]
> do_mount+0x1306/0x1b30 fs/namespace.c:3138
> __do_sys_mount fs/namespace.c:3347 [inline]
> __se_sys_mount fs/namespace.c:3324 [inline]
> __x64_sys_mount+0x18f/0x230 fs/namespace.c:3324
> do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
> entry_SYSCALL_64_after_hwframe+0x49/0xb3
> RIP: 0033:0x45c889
> Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
> RSP: 002b:00007ffc1930ec48 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
> RAX: ffffffffffffffda RBX: 0000000001324914 RCX: 000000000045c889
> RDX: 0000000020000140 RSI: 0000000020000040 RDI: 0000000000000000
> RBP: 000000000076bf00 R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
> R13: 0000000000000749 R14: 00000000004ca15a R15: 0000000000000013
Looking at the code now that it the internal mount of proc is no
longer used it is possible to unmount proc. If proc is unmounted
the fields of the pid namespace that were used for filesystem
specific state are not reinitialized.
Which means that proc_self and proc_thread_self can be pointers to
already freed dentries.
The reported user after free appears to be from mounting and
unmounting proc followed by mounting proc again and using error
injection to cause the new root dentry allocation to fail. This in
turn results in proc_kill_sb running with proc_self and
proc_thread_self still retaining their values from the previous mount
of proc. Then calling dput on either proc_self of proc_thread_self
will result in double put. Which KASAN sees as a use after free.
Solve this by always reinitializing the filesystem state stored
in the struct pid_namespace, when proc is unmounted.
Reported-by: [email protected]
Acked-by: Christian Brauner <[email protected]>
Fixes: 69879c01a0c3 ("proc: Remove the now unnecessary internal mount of proc")
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Misc EFI fixes, including the boot failure regression caused by the
BSS section not being cleared by the loaders"
* tag 'efi-urgent-2020-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Revert struct layout change to fix kexec boot regression
efi/x86: Don't remap text<->rodata gap read-only for mixed mode
efi/x86: Fix the deletion of variables in mixed mode
efi/libstub/file: Merge file name buffers to reduce stack usage
Documentation/x86, efi/x86: Clarify EFI handover protocol and its requirements
efi/arm: Deal with ADR going out of range in efi_enter_kernel()
efi/x86: Always relocate the kernel for EFI handover entry
efi/x86: Move efi stub globals from .bss to .data
efi/libstub/x86: Remove redundant assignment to pointer hdr
efi/cper: Use scnprintf() for avoiding potential buffer overflow
|
|
In commit 16ad3f4022bb ("tipc: introduce variable window congestion
control"), we allow link window to change with the congestion avoidance
algorithm. However, there is a bug that during the slow-start if packet
retransmission occurs, the link will enter the fast-recovery phase, set
its window to the 'ssthresh' which is never less than 300, so the link
window suddenly increases to that limit instead of decreasing.
Consequently, two issues have been observed:
- For broadcast-link: it can leave a gap between the link queues that a
new packet will be inserted and sent before the previous ones, i.e. not
in-order.
- For unicast: the algorithm does not work as expected, the link window
jumps to the slow-start threshold whereas packet retransmission occurs.
This commit fixes the issues by avoiding such the link window increase,
but still decreasing if the 'ssthresh' is lowered.
Fixes: 16ad3f4022bb ("tipc: introduce variable window congestion control")
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Tuong Lien <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The default value of tcp_challenge_ack_limit has been changed from
100 to 1000 and this patch fixes its documentation.
Signed-off-by: Cambda Zhu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix the following sparse warning:
drivers/net/ethernet/dec/tulip/tulip_core.c:1280:28: warning: symbol
'early_486_chipsets' was not declared. Should it be static?
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The description below is already in use in
'rk3228-evb.dts', 'rk3229-xms6.dts' and 'rk3328.dtsi'
but somehow never added to a document, so add
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
for ethernet-phy nodes on Rockchip platforms to
'ethernet-phy.yaml'.
Signed-off-by: Johan Jonker <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The variable err is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The example for the CrOS EC PWM is incomplete and now generates a dtc
warning:
Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.example.dts:17.11-23.11:
Warning (unit_address_vs_reg): /example-0/cros-ec@0: node has a unit name, but no reg or ranges property
Fixing this results in more warnings as a parent spi node is needed as
well.
Cc: Thierry Reding <[email protected]>
Cc: Benson Leung <[email protected]>
Cc: Enric Balletbo i Serra <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Acked-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
|
|
In [see "Fixes:"] I missed the fact that str_read() may give back an
allocated pointer even if it returns an error, causing a potential
memory leak in filename_trans_read_one(). Fix this by making the
function free the allocated string whenever it returns a non-zero value,
which also makes its behavior more obvious and prevents repeating the
same mistake in the future.
Reported-by: coverity-bot <[email protected]>
Addresses-Coverity-ID: 1461665 ("Resource leaks")
Fixes: c3a276111ea2 ("selinux: optimize storage of filename transitions")
Signed-off-by: Ondrej Mosnacek <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
|
|
If execute ./scripts/documentation-file-ref-check in a directory which is
not a git tree, it will exit without a line break, fix it.
Without this patch:
[loongson@localhost linux-5.7-rc1]$ ./scripts/documentation-file-ref-check
Warning: can't check if file exists, as this is not a git tree[loongson@localhost linux-5.7-rc1]$
With this patch:
[loongson@localhost linux-5.7-rc1]$ ./scripts/documentation-file-ref-check
Warning: can't check if file exists, as this is not a git tree
[loongson@localhost linux-5.7-rc1]$
Signed-off-by: Tiezhu Yang <[email protected]>
Reviewed-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
When kernel-doc generates a 'c:function' directive for a function
one of whose arguments is a function pointer, it fails to print
the close-paren after the argument list of the function pointer
argument. For instance:
long work_on_cpu(int cpu, long (*fn) (void *, void * arg)
in driver-api/basics.html is missing a ')' separating the
"void *" of the 'fn' arguments from the ", void * arg" which
is an argument to work_on_cpu().
Add the missing close-paren, so that we render the prototype
correctly:
long work_on_cpu(int cpu, long (*fn)(void *), void * arg)
(Note that Sphinx stops rendering a space between the '(fn*)' and the
'(void *)' once it gets something that's syntactically valid.)
Signed-off-by: Peter Maydell <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Documentation for the kernel.modprobe sysctl was added both by
commit 0317c5371e6a ("docs: merge debugging-modules.txt into
sysctl/kernel.rst") and by commit 6e7158250625 ("docs: admin-guide:
document the kernel.modprobe sysctl"), resulting in the same sysctl
being documented in two places. Merge these into one place.
Signed-off-by: Eric Biggers <[email protected]>
Reviewed-by: Stephen Kitt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Use the correct prototypes for do_gettimeofday(), getnstimeofday() and
getnstimeofday64(). All of these returned void and passed the return
value by reference. This should make the documentation of their
deprecation and replacements easier to search for.
Signed-off-by: Chris Packham <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Returning the error code via a 'int *ret' when the function returns a
pointer is very un-kernely and causes gcc 10's static analysis to choke:
net/rds/message.c: In function ‘rds_message_map_pages’:
net/rds/message.c:358:10: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
358 | return ERR_PTR(ret);
Use a typical ERR_PTR return instead.
Signed-off-by: Jason Gunthorpe <[email protected]>
Acked-by: Santosh Shilimkar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
To rehash a previous explanation given in commit 1c44ce560b4d ("net:
mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is
up"), the switch driver operates the in a mode where a single VLAN can
be transmitted as untagged on a particular egress port. That is the
"native VLAN on trunk port" use case.
The configuration for this native VLAN is driven in 2 ways:
- Set the egress port rewriter to strip the VLAN tag for the native
VID (as it is egress-untagged, after all).
- Configure the ingress port to drop untagged and priority-tagged
traffic, if there is no native VLAN. The intention of this setting is
that a trunk port with no native VLAN should not accept untagged
traffic.
Since both of the above configurations for the native VLAN should only
be done if VLAN awareness is requested, they are actually done from the
ocelot_port_vlan_filtering function, after the basic procedure of
toggling the VLAN awareness flag of the port.
But there's a problem with that simplistic approach: we are trying to
juggle with 2 independent variables from a single function:
- Native VLAN of the port - its value is held in port->vid.
- VLAN awareness state of the port - currently there are some issues
here, more on that later*.
The actual problem can be seen when enslaving the switch ports to a VLAN
filtering bridge:
0. The driver configures a pvid of zero for each port, when in
standalone mode. While the bridge configures a default_pvid of 1 for
each port that gets added as a slave to it.
1. The bridge calls ocelot_port_vlan_filtering with vlan_aware=true.
The VLAN-filtering-dependent portion of the native VLAN
configuration is done, considering that the native VLAN is 0.
2. The bridge calls ocelot_vlan_add with vid=1, pvid=true,
untagged=true. The native VLAN changes to 1 (change which gets
propagated to hardware).
3. ??? - nobody calls ocelot_port_vlan_filtering again, to reapply the
VLAN-filtering-dependent portion of the native VLAN configuration,
for the new native VLAN of 1. One can notice that after toggling "ip
link set dev br0 type bridge vlan_filtering 0 && ip link set dev br0
type bridge vlan_filtering 1", the new native VLAN finally makes it
through and untagged traffic finally starts flowing again. But
obviously that shouldn't be needed.
So it is clear that 2 independent variables need to both re-trigger the
native VLAN configuration. So we introduce the second variable as
ocelot_port->vlan_aware.
*Actually both the DSA Felix driver and the Ocelot driver already had
each its own variable:
- Ocelot: ocelot_port_private->vlan_aware
- Felix: dsa_port->vlan_filtering
but the common Ocelot library needs to work with a single, common,
variable, so there is some refactoring done to move the vlan_aware
property from the private structure into the common ocelot_port
structure.
Fixes: 97bb69e1e36e ("net: mscc: ocelot: break apart ocelot_vlan_port_apply")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2020-04-15
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 3 day(s) which contain
a total of 11 files changed, 238 insertions(+), 95 deletions(-).
The main changes are:
1) Fix offset overflow for BPF_MEM BPF_DW insn mapping on arm32 JIT,
from Luke Nelson and Xi Wang.
2) Prevent mprotect() to make frozen & mmap()'ed BPF map writeable
again, from Andrii Nakryiko and Jann Horn.
3) Fix type of old_fd in bpf_xdp_set_link_opts to int in libbpf and add
selftests, from Toke Høiland-Jørgensen.
4) Fix AF_XDP to check that headroom cannot be larger than the available
space in the chunk, from Magnus Karlsson.
5) Fix reset of XDP prog when expected_fd is set, from David Ahern.
6) Fix a segfault in bpftool's struct_ops command when BTF is not
available, from Daniel T. Lee.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A couple of fixes:
* FTM responder policy netlink validation fix
(but the only user validates again later)
* kernel-doc fixes
* a fix for a race in mac80211 radio registration vs. userspace
* a mesh channel switch fix
* a fix for a syzbot reported kasprintf() issue
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
In assembly, many instances of __emit_inst(x) expand to a directive. In
a few places __emit_inst(x) is used as an assembler macro argument. For
example, in arch/arm64/kvm/hyp/entry.S
ALTERNATIVE(nop, SET_PSTATE_PAN(1), ARM64_HAS_PAN, CONFIG_ARM64_PAN)
expands to the following by the C preprocessor:
alternative_insn nop, .inst (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1
Both comma and space are separators, with an exception that content
inside a pair of parentheses/quotes is not split, so the clang
integrated assembler splits the arguments to:
nop, .inst, (0xd500401f | ((0) << 16 | (4) << 5) | ((!!1) << 8)), 4, 1
GNU as preprocesses the input with do_scrub_chars(). Its arm64 backend
(along with many other non-x86 backends) sees:
alternative_insn nop,.inst(0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1
# .inst(...) is parsed as one argument
while its x86 backend sees:
alternative_insn nop,.inst (0xd500401f|((0)<<16|(4)<<5)|((!!1)<<8)),4,1
# The extra space before '(' makes the whole .inst (...) parsed as two arguments
The non-x86 backend's behavior is considered unintentional
(https://sourceware.org/bugzilla/show_bug.cgi?id=25750).
So drop the space separator inside `.inst (...)` to make the clang
integrated assembler work.
Suggested-by: Ilie Halip <[email protected]>
Signed-off-by: Fangrui Song <[email protected]>
Reviewed-by: Mark Rutland <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/939
Signed-off-by: Catalin Marinas <[email protected]>
|
|
David Ahern noticed that there was a bug in the EXPECTED_FD code so
programs did not get detached properly when that parameter was supplied.
This case was not included in the xdp_attach tests; so let's add it to be
sure that such a bug does not sneak back in down.
Fixes: 87854a0b57b3 ("selftests/bpf: Add tests for attaching XDP programs")
Reported-by: David Ahern <[email protected]>
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The 'old_fd' parameter used for atomic replacement of XDP programs is
supposed to be an FD, but was left as a u32 from an earlier iteration of
the patch that added it. It was converted to an int when read, so things
worked correctly even with negative values, but better change the
definition to correctly reflect the intention.
Fixes: bd5ca3ef93cd ("libbpf: Add function to set link XDP fd while specifying old program")
Reported-by: David Ahern <[email protected]>
Signed-off-by: Toke Høiland-Jørgensen <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: David Ahern <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
For some types of BPF programs that utilize expected_attach_type, libbpf won't
set load_attr.expected_attach_type, even if expected_attach_type is known from
section definition. This was done to preserve backwards compatibility with old
kernels that didn't recognize expected_attach_type attribute yet (which was
added in 5e43f899b03a ("bpf: Check attach type at prog load time"). But this
is problematic for some BPF programs that utilize newer features that require
kernel to know specific expected_attach_type (e.g., extended set of return
codes for cgroup_skb/egress programs).
This patch makes libbpf specify expected_attach_type by default, but also
detect support for this field in kernel and not set it during program load.
This allows to have a good metadata for bpf_program
(e.g., bpf_program__get_extected_attach_type()), but still work with old
kernels (for cases where it can work at all).
Additionally, due to expected_attach_type being always set for recognized
program types, bpf_program__attach_cgroup doesn't have to do extra checks to
determine correct attach type, so remove that additional logic.
Also adjust section_names selftest to account for this change.
More detailed discussion can be found in [0].
[0] https://lore.kernel.org/bpf/[email protected]/
Fixes: 5cf1e9145630 ("bpf: cgroup inet skb programs can return 0 to 3")
Fixes: 5e43f899b03a ("bpf: Check attach type at prog load time")
Reported-by: Andrey Ignatov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Acked-by: Andrey Ignatov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add a check that the headroom cannot be larger than the available
space in the chunk. In the current code, a malicious user can set the
headroom to a value larger than the chunk size minus the fixed XDP
headroom. That way packets with a length larger than the supported
size in the umem could get accepted and result in an out-of-bounds
write.
Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt")
Reported-by: Bui Quang Minh <[email protected]>
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=207225
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The aarch32_vdso_pages[] array never has entries allocated in the C_VVAR
or C_VDSO slots, and as the array is zero initialized these contain
NULL.
However in __aarch32_alloc_vdso_pages() when
aarch32_alloc_kuser_vdso_page() fails we attempt to free the page whose
struct page is at NULL, which is obviously nonsensical.
This patch removes the erroneous page freeing.
Fixes: 7c1deeeb0130 ("arm64: compat: VDSO setup for compat layer")
Cc: <[email protected]> # 5.3.x-
Cc: Vincenzo Frascino <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Mark Rutland <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Previously mesh channel switch happens if beacon contains
CSA IE without checking the mesh peer info. Due to that
channel switch happens even if the beacon is not from
its own mesh peer. Fixing that by checking if the CSA
originated from the same mesh network before proceeding
for channel switch.
Signed-off-by: Tamizh chelvam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
|
|
A race condition leading to a kernel crash is observed during invocation
of ieee80211_register_hw() on a dragonboard410c device having wcn36xx
driver built as a loadable module along with a wifi manager in user-space
waiting for a wifi device (wlanX) to be active.
Sequence diagram for a particular kernel crash scenario:
user-space ieee80211_register_hw() ieee80211_tasklet_handler()
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
| | |
|<---phy0----wiphy_register() |
|-----iwd if_add---->| |
| |<---IRQ----(RX packet)
| Kernel crash |
| due to unallocated |
| workqueue. |
| | |
| alloc_ordered_workqueue() |
| | |
| Misc wiphy init. |
| | |
| ieee80211_if_add() |
| | |
As evident from above sequence diagram, this race condition isn't specific
to a particular wifi driver but rather the initialization sequence in
ieee80211_register_hw() needs to be fixed. So re-order the initialization
sequence and the updated sequence diagram would look like:
user-space ieee80211_register_hw() ieee80211_tasklet_handler()
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
| | |
| alloc_ordered_workqueue() |
| | |
| Misc wiphy init. |
| | |
|<---phy0----wiphy_register() |
|-----iwd if_add---->| |
| |<---IRQ----(RX packet)
| | |
| ieee80211_if_add() |
| | |
Cc: [email protected]
Signed-off-by: Sumit Garg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[Johannes: fix rtnl imbalances]
Signed-off-by: Johannes Berg <[email protected]>
|
|
triggering 'snapshot' operation
Traced event can trigger 'snapshot' operation(i.e. calls snapshot_trigger()
or snapshot_count_trigger()) when register_snapshot_trigger() has completed
registration but doesn't allocate buffer for 'snapshot' event trigger. In
the rare case, 'snapshot' operation always detects the lack of allocated
buffer so make register_snapshot_trigger() allocate buffer first.
trigger-snapshot.tc in kselftest reproduces the issue on slow vm:
-----------------------------------------------------------
cat trace
...
ftracetest-3028 [002] .... 236.784290: sched_process_fork: comm=ftracetest pid=3028 child_comm=ftracetest child_pid=3036
<...>-2875 [003] .... 240.460335: tracing_snapshot_instance_cond: *** SNAPSHOT NOT ALLOCATED ***
<...>-2875 [003] .... 240.460338: tracing_snapshot_instance_cond: *** stopping trace here! ***
-----------------------------------------------------------
Link: http://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 93e31ffbf417a ("tracing: Add 'snapshot' event trigger command")
Signed-off-by: Xiao Yang <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
When checking for draining with __req_need_defer(), it tries to match
how many requests were sent before a current one with number of already
completed. Dropped SQEs are included in req->sequence, and they won't
ever appear in CQ. To compensate for that, __req_need_defer() substracts
ctx->cached_sq_dropped.
However, what it should really use is number of SQEs dropped __before__
the current one. In other words, any submitted request shouldn't
shouldn't affect dequeueing from the drain queue of previously submitted
ones.
Instead of saving proper ctx->cached_sq_dropped in each request,
substract from req->sequence it at initialisation, so it includes number
of properly submitted requests.
note: it also changes behaviour of timeouts, but
1. it's already diverge from the description because of using SQ
2. the description is ambiguous regarding dropped SQEs
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
req->timeout.count and req->io->timeout.seq_offset store the same value,
which is sqe->off. Kill the second one
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
io_timeout() can be executed asynchronously by a worker and without
holding ctx->uring_lock
1. using ctx->cached_sq_head there is racy there
2. it should count events from a moment of timeout's submission, but
not execution
Use req->sequence.
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Russell King says:
====================
Fix 88x3310 leaving power save mode
This series fixes a problem with the 88x3310 PHY on Macchiatobin
coming out of powersave mode noticed by Matteo Croce. It seems
that certain PHY firmwares do not properly exit powersave mode,
resulting in a fibre link not coming up.
The solution appears to be to soft-reset the PHY after clearing
the powersave bit.
We add support for reporting the PHY firmware version to the kernel
log, and use it to trigger this new behaviour if we have v0.3.x.x
or more recent firmware on the PHY. This, however, is a guess as
the firmware revision documentation does not mention this issue,
and we know that v0.2.1.0 works without this fix but v0.3.3.0 and
later does not.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Soft-reset the PHY when coming out of low power mode, which seems to
be necessary with firmware versions 0.3.3.0 and 0.3.10.0.
This depends on ("net: marvell10g: report firmware version")
Fixes: c9cc1c815d36 ("net: phy: marvell10g: place in powersave mode at probe")
Reported-by: Matteo Croce <[email protected]>
Tested-by: Matteo Croce <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Russell King <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Report the firmware version when probing the PHY to allow issues
attributable to firmware to be diagnosed.
Tested-by: Matteo Croce <[email protected]>
Signed-off-by: Russell King <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Positive return values are also failures that don't set val,
although this probably can't happen. Fixes gcc 10 warning:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized]
3747 | *phy_fw_ver = val;
Fixes: 01b6961410b7 ("cxgb4: Add PHY firmware support for T420-BT cards")
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Allow all the RGMII modes to be used. (Not only "rgmii", "rgmii-id"
but "rgmii-txid", "rgmii-rxid")
Signed-off-by: Atsushi Nemoto <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Andrew Lunn says:
====================
mv88e6xxx fixed link fixes
Recent changes for how the MAC is configured broke fixed links, as
used by CPU/DSA ports, and for SFPs when phylink cannot be used. The
first fix is unchanged from v1. The second fix takes a different
solution than v1. If a CPU or DSA port is known to have a PHYLINK
instance, configure the port down before instantiating the PHYLINK, so
it is in the down state as expected by PHYLINK.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
DSA and CPU ports can be configured in two ways. By default, the
driver should configure such ports to there maximum bandwidth. For
most use cases, this is sufficient. When this default is insufficient,
a phylink instance can be bound to such ports, and phylink will
configure the port, e.g. based on fixed-link properties. phylink
assumes the port is initially down. Given that the driver should have
already configured it to its maximum speed, ask the driver to down
the port before instantiating the phylink instance.
Fixes: 30c4a5b0aad8 ("net: mv88e6xxx: use resolved link config in mac_link_up()")
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The 88e6185 is reporting it has detected a PHY, when a port is
connected to an SFP. As a result, the fixed-phy configuration is not
being applied. That then breaks packet transfer, since the port is
reported as being down.
Add additional conditions to check the interface mode, and if it is
fixed always configure the port on link up/down, independent of the
PPU status.
Fixes: 30c4a5b0aad8 ("net: mv88e6xxx: use resolved link config in mac_link_up()")
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Shannon Nelson says:
====================
ionic: address automated build complaints
Kernel build checks found a couple of things to improve.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove an unused initialized value.
Fixes: 7e4d47596b68 ("ionic: replay filters after fw upgrade")
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|