| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 19be55701071 ("drm/ttm: add operation ctx to ttm_bo_validate v2")
introduced a regression where the vmwgfx driver refused to evict a
buffer that was still busy instead of waiting for it to become idle.
Fix this.
Cc: <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
Reviewed-by: Christian König <[email protected]>
|
|
If framebuffers are larger, we create bounce surfaces that are within
STDU limits.
Signed-off-by: Deepak Rawat <[email protected]>
Reviewed-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
|
|
For all display units, limit mode size exposed to texture_max_width/
height as this is the maximum framebuffer size that virtual device can
create.
Signed-off-by: Deepak Rawat <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
Reviewed-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
|
|
For STDU individual screen target size is limited by
SVGA_REG_SCREENTARGET_MAX_WIDTH/HEIGHT registers so add that limit
during atomic check_modeset.
An additional limit is placed in the update_layout ioctl to avoid
requesting layouts that current user-space typically can't support.
Also modified the comments to reflect current limitation on topology.
Signed-off-by: Deepak Rawat <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
Reviewed-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
|
|
During atomic check to prepare the new topology no need to check if
old_crtc_state was enabled or not. This will cause atomic_check to fail
because due to connector routing a crtc can be in atomic_state even if
there was no change to enable status.
Detected this issue with igt run.
Signed-off-by: Deepak Rawat <[email protected]>
Reviewed-by: Sinclair Yeh <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
|
|
R-Car DU changes for v4.20
The pull request mostly contains updates to the R-Car DU driver, notably
support for interlaced modes on Gen3 hardware, support for the LVDS output on
R8A77980, and a set of miscellaneous bug fixes. There are also two SPDX
conversion patches for the drm shmobile and panel-lvds drivers, as well as an
update to MAINTAINERS to add Kieran Bingham as a co-maintainer for the DU
driver.
Signed-off-by: Dave Airlie <[email protected]>
From: Laurent Pinchart <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/3273568.LdoAI77IYW@avalon
|
|
Add new pci id.
Reviewed-by: Rex Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Temporary disable UVD/VCE block if is virtual device
Signed-off-by: Frank Min <[email protected]>
Signed-off-by: Xiangliang Yu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add sriov capability detection for vega20, then can check if device is
virtual device.
Signed-off-by: Frank Min <[email protected]>
Signed-off-by: Xiangliang Yu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.20:
UAPI Changes:
- None
Cross-subsystem Changes:
- None
Core Changes:
- Allow drivers to disable features with per-device granularity (Ville)
- Use EOPNOTSUPP when iface/feature is unsupported instead of
EINVAL/errno soup (Chris)
- Simplify M/N DP quirk by using constant N to limit size of M/N (Shawn)
- add quirk for LG LP140WF6-SPM1 eDP panel (Shawn)
Driver Changes:
- i915/amdgpu: Disable DRIVER_ATOMIC for older/unsupported devices (Ville)
- sun4i: add support for R40 HDMI PHY (Icenowy)
Cc: Ville Syrjälä <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Icenowy Zheng <[email protected]>
Cc: Lee, Shawn C <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
From: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919200218.GA186644@art_vandelay
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Only fixes coming from gvt containing "Two more BXT fixes from Colin,
one srcu locking fix and one fix for GGTT clear when destroy vGPU."
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v4.19-rc5:
- Fix crash in vgem in drm_drv_uses_atomic_modeset.
- Allow atomic drivers that don't set DRIVER_ATOMIC to create debugfs entries.
- Fix compiler warning for unused connector_funcs.
- Fix null pointer deref on UDL unplug.
- Disable DRM support for sun4i's R40 for now.
(Not all patches went in for v4.19, so it has to wait a cycle.)
- NULL-terminate the of_device_id table in pl111.
- Make sure vc4 NV12 planar format works when displaying an unscaled fb.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Test guest access to MSR_PLATFORM_INFO when the capability is enabled
or disabled.
Signed-off-by: Drew Schmitt <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Add KVM_CAP_MSR_PLATFORM_INFO so that userspace can disable guest access
to reads of MSR_PLATFORM_INFO.
Disabling access to reads of this MSR gives userspace the control to "expose"
this platform-dependent information to guests in a clear way. As it exists
today, guests that read this MSR would get unpopulated information if userspace
hadn't already set it (and prior to this patch series, only the CPUID faulting
information could have been populated). This existing interface could be
confusing if guests don't handle the potential for incorrect/incomplete
information gracefully (e.g. zero reported for base frequency).
Signed-off-by: Drew Schmitt <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Allow userspace to set turbo bits in MSR_PLATFORM_INFO. Previously, only
the CPUID faulting bit was settable. But now any bit in
MSR_PLATFORM_INFO would be settable. This can be used, for example, to
convey frequency information about the platform on which the guest is
running.
Signed-off-by: Drew Schmitt <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
According to section "Checks on VMX Controls" in Intel SDM vol 3C, the
following check needs to be enforced on vmentry of L2 guests:
If the 'enable VPID' VM-execution control is 1, the value of the
of the VPID VM-execution control field must not be 0000H.
Signed-off-by: Krish Sadhukhan <[email protected]>
Reviewed-by: Mark Kanda <[email protected]>
Reviewed-by: Liran Alon <[email protected]>
Reviewed-by: Jim Mattson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
According to section "Checks on VMX Controls" in Intel SDM vol 3C,
the following check needs to be enforced on vmentry of L2 guests:
- Bits 5:0 of the posted-interrupt descriptor address are all 0.
- The posted-interrupt descriptor address does not set any bits
beyond the processor's physical-address width.
Signed-off-by: Krish Sadhukhan <[email protected]>
Reviewed-by: Mark Kanda <[email protected]>
Reviewed-by: Liran Alon <[email protected]>
Reviewed-by: Darren Kenny <[email protected]>
Reviewed-by: Karl Heubaum <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
In case L1 do not intercept L2 HLT or enter L2 in HLT activity-state,
it is possible for a vCPU to be blocked while it is in guest-mode.
According to Intel SDM 26.6.5 Interrupt-Window Exiting and
Virtual-Interrupt Delivery: "These events wake the logical processor
if it just entered the HLT state because of a VM entry".
Therefore, if L1 enters L2 in HLT activity-state and L2 has a pending
deliverable interrupt in vmcs12->guest_intr_status.RVI, then the vCPU
should be waken from the HLT state and injected with the interrupt.
In addition, if while the vCPU is blocked (while it is in guest-mode),
it receives a nested posted-interrupt, then the vCPU should also be
waken and injected with the posted interrupt.
To handle these cases, this patch enhances kvm_vcpu_has_events() to also
check if there is a pending interrupt in L2 virtual APICv provided by
L1. That is, it evaluates if there is a pending virtual interrupt for L2
by checking RVI[7:4] > VPPR[7:4] as specified in Intel SDM 29.2.1
Evaluation of Pending Interrupts.
Note that this also handles the case of nested posted-interrupt by the
fact RVI is updated in vmx_complete_nested_posted_interrupt() which is
called from kvm_vcpu_check_block() -> kvm_arch_vcpu_runnable() ->
kvm_vcpu_running() -> vmx_check_nested_events() ->
vmx_complete_nested_posted_interrupt().
Reviewed-by: Nikita Leshenko <[email protected]>
Reviewed-by: Darren Kenny <[email protected]>
Signed-off-by: Liran Alon <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
VMX cannot be enabled under SMM, check it when CR4 is set and when nested
virtualization state is restored.
This should fix some WARNs reported by syzkaller, mostly around
alloc_shadow_vmcs.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The functions
kvm_load_guest_fpu()
kvm_put_guest_fpu()
are only used locally, make them static. This requires also that both
functions are moved because they are used before their implementation.
Those functions were exported (via EXPORT_SYMBOL) before commit
e5bb40251a920 ("KVM: Drop kvm_{load,put}_guest_fpu() exports").
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
These structures are going to be used from KVM code so let's make
their names reflect their Hyper-V origin.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Reviewed-by: Roman Kagan <[email protected]>
Acked-by: K. Y. Srinivasan <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
A VMX preemption timer value of '0' is guaranteed to cause a VMExit
prior to the CPU executing any instructions in the guest. Use the
preemption timer (if it's supported) to trigger immediate VMExit
in place of the current method of sending a self-IPI. This ensures
that pending VMExit injection to L1 occurs prior to executing any
instructions in the guest (regardless of nesting level).
When deferring VMExit injection, KVM generates an immediate VMExit
from the (possibly nested) guest by sending itself an IPI. Because
hardware interrupts are blocked prior to VMEnter and are unblocked
(in hardware) after VMEnter, this results in taking a VMExit(INTR)
before any guest instruction is executed. But, as this approach
relies on the IPI being received before VMEnter executes, it only
works as intended when KVM is running as L0. Because there are no
architectural guarantees regarding when IPIs are delivered, when
running nested the INTR may "arrive" long after L2 is running e.g.
L0 KVM doesn't force an immediate switch to L1 to deliver an INTR.
For the most part, this unintended delay is not an issue since the
events being injected to L1 also do not have architectural guarantees
regarding their timing. The notable exception is the VMX preemption
timer[1], which is architecturally guaranteed to cause a VMExit prior
to executing any instructions in the guest if the timer value is '0'
at VMEnter. Specifically, the delay in injecting the VMExit causes
the preemption timer KVM unit test to fail when run in a nested guest.
Note: this approach is viable even on CPUs with a broken preemption
timer, as broken in this context only means the timer counts at the
wrong rate. There are no known errata affecting timer value of '0'.
[1] I/O SMIs also have guarantees on when they arrive, but I have
no idea if/how those are emulated in KVM.
Signed-off-by: Sean Christopherson <[email protected]>
[Use a hook for SVM instead of leaving the default in x86.c - Paolo]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Provide a singular location where the VMX preemption timer bit is
set/cleared so that future usages of the preemption timer can ensure
the VMCS bit is up-to-date without having to modify unrelated code
paths. For example, the preemption timer can be used to force an
immediate VMExit. Cache the status of the timer to avoid redundant
VMREAD and VMWRITE, e.g. if the timer stays armed across multiple
VMEnters/VMExits.
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
A VMX preemption timer value of '0' at the time of VMEnter is
architecturally guaranteed to cause a VMExit prior to the CPU
executing any instructions in the guest. This architectural
definition is in place to ensure that a previously expired timer
is correctly recognized by the CPU as it is possible for the timer
to reach zero and not trigger a VMexit due to a higher priority
VMExit being signalled instead, e.g. a pending #DB that morphs into
a VMExit.
Whether by design or coincidence, commit f4124500c2c1 ("KVM: nVMX:
Fully emulate preemption timer") special cased timer values of '0'
and '1' to ensure prompt delivery of the VMExit. Unlike '0', a
timer value of '1' has no has no architectural guarantees regarding
when it is delivered.
Modify the timer emulation to trigger immediate VMExit if and only
if the timer value is '0', and document precisely why '0' is special.
Do this even if calibration of the virtual TSC failed, i.e. VMExit
will occur immediately regardless of the frequency of the timer.
Making only '0' a special case gives KVM leeway to be more aggressive
in ensuring the VMExit is injected prior to executing instructions in
the nested guest, and also eliminates any ambiguity as to why '1' is
a special case, e.g. why wasn't the threshold for a "short timeout"
set to 10, 100, 1000, etc...
Signed-off-by: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Switch to bitmap_zalloc() to show clearly what we are allocating.
Besides that it returns pointer of bitmap type instead of opaque void *.
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
kvm_commit_zap_page() has been renamed to kvm_mmu_commit_zap_page()
This patch is to fix the commit.
Signed-off-by: Lan Tianyu <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
I run into the following error
testing/selftests/kvm/dirty_log_test.c:285: undefined reference to `pthread_create'
testing/selftests/kvm/dirty_log_test.c:297: undefined reference to `pthread_join'
collect2: error: ld returned 1 exit status
my gcc version is gcc version 4.8.4
"-pthread" would work everywhere
Signed-off-by: Lei Yang <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Here is the code path which shows kvm_mmu_setup() is invoked after
kvm_mmu_create(). Since kvm_mmu_setup() is only invoked in this code path,
this means the root_hpa and prev_roots are guaranteed to be invalid. And
it is not necessary to reset it again.
kvm_vm_ioctl_create_vcpu()
kvm_arch_vcpu_create()
vmx_create_vcpu()
kvm_vcpu_init()
kvm_arch_vcpu_init()
kvm_mmu_create()
kvm_arch_vcpu_setup()
kvm_mmu_setup()
kvm_init_mmu()
This patch set reset_roots to false in kmv_mmu_setup().
Fixes: 50c28f21d045dde8c52548f8482d456b3f0956f5
Signed-off-by: Wei Yang <[email protected]>
Reviewed-by: Liran Alon <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
kvm should not attempt to read guest PDPTEs when CR0.PG = 0 and
CR4.PAE = 1.
Signed-off-by: Junaid Shahid <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
When VMX is used with flexpriority disabled (because of no support or
if disabled with module parameter) MMIO interface to lAPIC is still
available in x2APIC mode while it shouldn't be (kvm-unit-tests):
PASS: apic_disable: Local apic enabled in x2APIC mode
PASS: apic_disable: CPUID.1H:EDX.APIC[bit 9] is set
FAIL: apic_disable: *0xfee00030: 50014
The issue appears because we basically do nothing while switching to
x2APIC mode when APIC access page is not used. apic_mmio_{read,write}
only check if lAPIC is disabled before proceeding to actual write.
When APIC access is virtualized we correctly manipulate with VMX controls
in vmx_set_virtual_apic_mode() and we don't get vmexits from memory writes
in x2APIC mode so there's no issue.
Disabling MMIO interface seems to be easy. The question is: what do we
do with these reads and writes? If we add apic_x2apic_mode() check to
apic_mmio_in_range() and return -EOPNOTSUPP these reads and writes will
go to userspace. When lAPIC is in kernel, Qemu uses this interface to
inject MSIs only (see kvm_apic_mem_write() in hw/i386/kvm/apic.c). This
somehow works with disabled lAPIC but when we're in xAPIC mode we will
get a real injected MSI from every write to lAPIC. Not good.
The simplest solution seems to be to just ignore writes to the region
and return ~0 for all reads when we're in x2APIC mode. This is what this
patch does. However, this approach is inconsistent with what currently
happens when flexpriority is enabled: we allocate APIC access page and
create KVM memory region so in x2APIC modes all reads and writes go to
this pre-allocated page which is, btw, the same for all vCPUs.
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
for_each_available_child_of_node will get and put the node properly,
the following of_node_put will lead to the double put. So just
remove it.
Signed-off-by: zhong jiang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Guenter writes:
"Various bug fixes for nct6775 driver"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
James writes:
"SCSI fixes on 20180919
A couple of small but important fixes, one affecting big endian and
the other fixing a BUG_ON in scatterlist processing.
Signed-off-by: James E.J. Bottomley <[email protected]>"
|
|
We don't need that in the per ASIC code.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Stops crashing on SI.
Signed-off-by: Christian König <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
That only worked by pure coincident. Completely remove the shifting and
always apply correct PAGE_SHIFT.
Signed-off-by: Christian König <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Don't grab the reservation lock any more and simplify the handling quite
a bit.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Huang Rui <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
It shouldn't add much overhead and we should make sure that critical
VRAM content is always restored.
Signed-off-by: Christian König <[email protected]>
Acked-by: Junwei Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
They aren't directly used by the hardware.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Junwei Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Even when GPU recovery is disabled we could run into a manually
triggered recovery.
v2: keep accidental removed comments
Signed-off-by: Christian König <[email protected]>
Acked-by: Emily Deng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
We are going to need this for recoverable page fault handling and it
makes shadow handling during GPU reset much more easier.
Signed-off-by: Christian König <[email protected]>
Acked-by: Junwei Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
DC doesn't seem to have a fallback path either.
So when interrupts doesn't work any more we are pretty much busted no
matter what.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Chunming Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
With OD settings applied, the clock table will be updated accordingly.
We need to retrieve the new clock tables then.
Signed-off-by: Evan Quan <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
With the latest SMC fw, we are able to get the voltage value for
specific frequency point. So, we update the OD relates to take
absolute voltage instead of offset.
Signed-off-by: Evan Quan <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Update the conditions to judge whether an OD feature
should be supported on vega20.
Signed-off-by: Evan Quan <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
vega20 should use umc_info v3_3 instead of v3_1. There are
serveral versions of umc_info for vega series. Compared to
various versions of these structures, vram_info strucure is
unified for vega series. The patch switch to query mem_type
from vram_info structure for all the vega series dGPU.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
atomfirmware has structure changes in varm_info. Updated it
to the latest one.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
In function ‘radeon_process_i2c_ch’ a comparison of a u8 value against
255 is done. Since it is always false, change the signature of this
function to use an `int` instead, which match the type used in caller:
`radeon_atom_hw_i2c_xfer`.
Fix the following warning triggered with W=1:
CC [M] drivers/gpu/drm/radeon/atombios_i2c.o
drivers/gpu/drm/radeon/atombios_i2c.c: In function ‘radeon_process_i2c_ch’:
drivers/gpu/drm/radeon/atombios_i2c.c:71:11: warning: comparison is always false due to limited range of data type [-Wtype-limits]
if (num > ATOM_MAX_HW_I2C_READ) {
^
Reviewed-by: Huang Rui <[email protected]>
Signed-off-by: Mathieu Malaterre <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
adev->gfx.rlc has the values from rlc_hdr already processed by
le32_to_cpu. Using the rlc_hdr values on big-endian machines causes
a kernel Oops due to writing well outside of the array (0x24000000
instead of 0x24).
Signed-off-by: A. Wilcox <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Tom St Denis <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|