aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-04-07brcmfmac: Delete unnecessary variable initialisationMarkus Elfring1-1/+1
In brcmf_sdio_download_firmware(), bcmerror is set by the call to brcmf_sdio_download_code_file(), before it's checked in the following line. Signed-off-by: Markus Elfring <[email protected]> Acked-by: Arend van Spriel <[email protected]> [Rewrote commit message] Signed-off-by: Julian Calaby <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2016-04-07ath9k_htc: Delete unnecessary variable initialisationMarkus Elfring1-1/+1
In ath9k_hif_usb_rx_stream(), i is initialised in the for loop it's used in. Signed-off-by: Markus Elfring <[email protected]> Reviewed-by: Oleksij Rempel <[email protected]> [Rewrote commit message] Signed-off-by: Julian Calaby <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2016-04-07rtlwifi: use to_delayed_work()Geliang Tang1-1/+1
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <[email protected]> [Update commit message] Signed-off-by: Julian Calaby <[email protected]> Acked-by: Larry Finger <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2016-04-07wl1251: use to_delayed_work()Geliang Tang1-1/+1
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <[email protected]> [Update commit message] Signed-off-by: Julian Calaby <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2016-04-07wlcore: use to_delayed_work()Geliang Tang3-7/+7
Use to_delayed_work() instead of open-coding it. Signed-off-by: Geliang Tang <[email protected]> [Update commit message] Signed-off-by: Julian Calaby <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2016-04-07ipw2x00: use to_pci_dev()Geliang Tang1-1/+1
Use to_pci_dev() instead of open-coding it. Signed-off-by: Geliang Tang <[email protected]> Signed-off-by: Julian Calaby <[email protected]> Acked-by: Stanislav Yakovlev <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2016-04-07ath9k: Remove unnecessary ?: operatorIvan Safonov1-3/+3
"(thermometer < 0) ? 0 : (thermometer == X)" is equivalent to "thermometer == X" for X >= 0. Signed-off-by: Ivan Safonov <[email protected]> [Updated commit message] Signed-off-by: Julian Calaby <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2016-04-07tcp/dccp: fix inet_reuseport_add_sock()Eric Dumazet2-2/+4
David Ahern reported panics in __inet_hash() caused by my recent commit. The reason is inet_reuseport_add_sock() was still using sk_nulls_for_each_rcu() instead of sk_for_each_rcu(). SO_REUSEPORT enabled listeners were causing an instant crash. While chasing this bug, I found that I forgot to clear SOCK_RCU_FREE flag, as it is inherited from the parent at clone time. Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: David Ahern <[email protected]> Tested-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-04-07Merge branch '1GbE' of ↵David S. Miller9-94/+53
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2016-04-06 This series contains updates to e1000, e1000e, igb and Kconfig. Alex fixes igb where we were casting the MAC address as __beXX and then passing it into le32_to_cpu, when we could simply cast as __lexx to maintain consistency since it is already little endian. Then enabled bulk free in transmit cleanup for igb. John Holland enables igb to pickup the MAC address from a device tree blob when CONFIG_OF has been enabled. Doron Shikmoni fixes a bug in the output of "ethtool -m ethX" where the data byte appeared duplicated. Stefan fixes up e1000 and e1000e ethtool offline tests which were calling dev_close() which causes IFF_UP to be cleared which removes teh interface routes and some addresses, so use ndo_stop() instead. Jiri Benc cleans up some old links in the Kconfig for Intel drivers where we referred to a URL which is no longer valid. I am so glad Jiri has the time in his day to spend clicking on and testing all the URL links in the the kernel. Arika Chen reverts the addition of a 'rtnl_unlock()' which had a unmatched 'rtnl_lock()' call before it. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-04-07ath10k: fix unconditional num_mpdus_ready subtractionRajkumar Manoharan1-4/+4
Decrement num_mpdus_ready only when rx amsdu is processed successfully. Not doing so, will result in leak and impact stabilty under low memory cases. Also commit 3128b3d8a2b9 ("ath10k: speedup htt rx descriptor processing for rx_ind") missed to removed unused skb list rx_q. Fixes: 3128b3d8a2b9 ("ath10k: speedup htt rx descriptor processing for rx_ind") Signed-off-by: Rajkumar Manoharan <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2016-04-07ath10k: remove unnecessary warning for probe response dropsRajkumar Manoharan1-2/+2
qca99x0 and qca4019 solutions limit probe responses transmissions. Logging warning message for each probe response drop is flooding kernel log unnecessary with " failed to increase tx mgmt pending count: -16, dropping". Hence reducing log level to debug. Reported-by: Sebastian Gottschall <[email protected]> Signed-off-by: Rajkumar Manoharan <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2016-04-07ath10k: fix calibration init sequence of qca99x0Rajkumar Manoharan1-4/+2
pre-calibration is meant for qca4019 which contains only caldata whereas calibration file is used by ar9888 and qca99x0 that contains both board data and caldata. So by definition both pre-cal-file and cal-file can not coexist. Keeping them in shared memory (union), is breaking boot sequence of qca99x0. Fix it by storing both binaries in separate memories. This issue is reported in ipq8064 platform which includes caldata in flash memory. Fixes: 3d9195ea19e4 ("ath10k: incorporate qca4019 cal data download sequence") Reported-by: Sebastian Gottschall <[email protected]> Signed-off-by: Rajkumar Manoharan <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2016-04-07Merge tag 'fixes-for-v4.6-rc3' of ↵Greg Kroah-Hartman7-20/+34
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.6-rc3 We have two more fixes to f_midi. It should now behave much better. dwc3-keystone.c has gotten a fix which now allows it to work on keystone device when running in peripheral mode. A similar fix for DMA configuration was made for udc-core, too. We have a new PCI ID for Intel's Broxton platform. DWC3 can run on those platforms as well. And we also have some dwc2 got a fix for dr_mode usage, while renesas controller got 3 important fixes: a NULL pointer deref fix, IRQ <-> DMA race fix, and a fix to prevent a situation where we would queue a request to a disabled endpoint.
2016-04-07iommu/vt-d: Silence an uninitialized variable warningDan Carpenter1-1/+1
My static checker complains that "dma_alias" is uninitialized unless we are dealing with a pci device. This is true but harmless. Anyway, we can flip the condition around to silence the warning. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2016-04-07iommu/rockchip: Fix "is stall active" checkJohn Keeping1-4/+4
Since commit cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") rk_iommu_is_stall_active() always returns false because the bitwise AND operates on the boolean flag promoted to an integer and a value that is either zero or BIT(2). Explicitly convert the right-hand value to a boolean so that both sides are guaranteed to be either zero or one. rk_iommu_is_paging_enabled() does not suffer from the same problem since RK_MMU_STATUS_PAGING_ENABLED is BIT(0), but let's apply the same change for consistency and to make it clear that it's correct without needing to lookup the value. Fixes: cd6438c5f844 ("iommu/rockchip: Reconstruct to support multi slaves") Signed-off-by: John Keeping <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Tested-by: Tomeu Vizoso <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2016-04-07iommu: Don't overwrite domain pointer when there is no default_domainJoerg Roedel1-1/+2
IOMMU drivers that do not support default domains, but make use of the the group->domain pointer can get that pointer overwritten with NULL on device add/remove. Make sure this can't happen by only overwriting the domain pointer when it is NULL. Cc: [email protected] # v4.4+ Fixes: 1228236de5f9 ('iommu: Move default domain allocation to iommu_group_get_for_dev()') Signed-off-by: Joerg Roedel <[email protected]>
2016-04-07virtio: add VIRTIO_CONFIG_S_NEEDS_RESET device status bitStefan Hajnoczi1-0/+2
The VIRTIO 1.0 specification added the DEVICE_NEEDS_RESET device status bit in "VIRTIO-98: Add DEVICE_NEEDS_RESET". This patch defines the device status bit in the uapi header file so that both the kernel and userspace applications can use it. The bit is currently unused by the virtio guest drivers and vhost. According to the spec "a good implementation will try to recover by issuing a reset". This is not attempted here because it requires auditing the virtio drivers to ensure there are no resource leaks or crashes if the device needs to be reset mid-operation. See "2.1 Device Status Field" in the VIRTIO 1.0 specification for details. Signed-off-by: Stefan Hajnoczi <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
2016-04-07MAINTAINERS: add entry for QEMUMichael S. Tsirkin1-0/+7
Gabriel merged support for QEMU FW CFG interface, but there's apparently no official maintainer. It's also possible that this will grow more interfaces in future. I'll happily co-maintain it and handle pull requests together with the rest of the PV stuff I maintain. Cc: Greg Kroah-Hartman <[email protected]> Cc: Gabriel Somlo <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Gabriel Somlo <[email protected]>
2016-04-07firmware: qemu_fw_cfg.c: hold ACPI global lock during device accessGabriel Somlo1-0/+16
Allowing for the future possibility of implementing AML-based (i.e., firmware-triggered) access to the QEMU fw_cfg device, acquire the global ACPI lock when accessing the device on behalf of the guest-side sysfs driver, to prevent any potential race conditions. Suggested-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Gabriel Somlo <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]>
2016-04-07virtio: virtio 1.0 cs04 spec compliance for resetMichael S. Tsirkin1-3/+8
The spec says: after writing 0 to device_status, the driver MUST wait for a read of device_status to return 0 before reinitializing the device. Cc: [email protected] Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]>
2016-04-07qemu_fw_cfg: don't leak kobj on init errorMichael S. Tsirkin1-1/+7
If platform_driver_register fails, we should cleanup fw_cfg_top_ko before exiting. Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Gabriel Somlo <[email protected]>
2016-04-07USB: option: add "D-Link DWM-221 B1" device idBjørn Mork1-0/+2
Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <[email protected]> Cc: <[email protected]> Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2016-04-07USB: serial: cp210x: Adding GE Healthcare Device IDMartyn Welch1-0/+1
The CP2105 is used in the GE Healthcare Remote Alarm Box, with the Manufacturer ID of 0x1901 and Product ID of 0x0194. Signed-off-by: Martyn Welch <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2016-04-07USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devicesJosh Boyer2-0/+12
A Fedora user reports that the ftdi_sio driver works properly for the ICP DAS I-7561U device. Further, the user manual for these devices instructs users to load the driver and add the ids using the sysfs interface. Add support for these in the driver directly so that the devices work out of the box instead of needing manual configuration. Reported-by: <[email protected]> CC: stable <[email protected]> Signed-off-by: Josh Boyer <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2016-04-07Merge branch '40GbE' of ↵David S. Miller19-88/+311
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-04-06 This series contains updates to i40e and i40evf. Deepthi adds a debug message to display the MSIx vector count for hardware capabilities. Shannon removed the setting of debug_mask at startup to take care of an issue where all the device capabilities getting printed when we had not asked for it. Moved the NVM status out of the admin queue structure, since it should really stay with the other NVM data structures. Akeem added the flush routine to the end of the reset flow to avoid problems in the pass-through routines. Jesse moves a local variable deeper into the depths of the driver where the light is low and the context is great. Then cleaned up the tx_ring argument since it was not making good arguments. Improved performance by not "checking for FCoE" by re-ordering the FCoE checks. Anjali adds the support for changing a VF from non-trusted to trusted and vice-versa. Mitch adds opcodes and structures to support RSS configuration by PF driver on behalf of the VF driver. Fixed how the VLAN feature flags are set. Kiran added defines for RSS, flow director, flexible payload and IPv6. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-04-06Revert "igb: Fix a deadlock in igb_sriov_reinit"Arika Chen1-1/+0
This reverts commit 3eb14ea8d958 ("igb: Fix a deadlock in igb_sriov_reinit") It is the same as commit f468adc944ef ("igb: missing rtnl_unlock in igb_sriov_reinit()") There is no rtnl_lock() in igb_resume before, rtnl_unlock will cause a deadlock. Signed-off-by: Arika Chen <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06net: intel: remove dead linksJiri Benc1-66/+14
The Kconfig for Intel NICs references two different URLs for the "Adapter & Driver ID Guide". Neither of those two links works. The current URL seems to be http://www.intel.com/content/www/us/en/support/network-and-i-o/ethernet-products/000005584.html but given it's apparently constantly changing, there's no point in having it in the help text. Just keep a generic pointer to http://support.intel.com. Hopefully, this one will have a longer live. It still works, at least. Furthermore, remove a link to "the latest Intel PRO/100 network driver for Linux", this has no place in the mainline kernel and the latest Linux driver it offers is from 2006, anyway. Signed-off-by: Jiri Benc <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40evf: properly handle VLAN featuresMitch Williams1-15/+12
Correctly set the VLAN feature flags after setting the rest of the netdev flags. And don't set them in hw_features, because these can't be controlled by the VF driver. Signed-off-by: Mitch Williams <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e/i40evf: Bump patch from 1.5.2 to 1.5.5Harshitha Ramamurthy2-2/+2
Signed-off-by: Harshitha Ramamurthy <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e: Input set mask constants for RSS, flow director, and flex bytesKiran Patil2-0/+75
Add defines for input set mask (RSS, flow director, flexible payload), including defines specific to IPv6. Change-ID: Ie95ef7d0916a4d6ca011c194283f959774c8dce9 Signed-off-by: Kiran Patil <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e: Move NVM event wait check to NVM codeShannon Nelson3-30/+33
The logic that checks AQ events for NVM done events is better kept in nvm.c with the rest of the nvmupdate handling code. Change-ID: I2ea58980df8ecaa3726b28a37bff3dfcb8df03dc Signed-off-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e: Add RSS configuration to virtual channelMitch Williams2-6/+84
Add opcodes and structures to support RSS configuration by PF driver on behalf of the VF drivers. This reduces complexity in the VF driver and allows us to support future hardware designs without modifying the VF driver. Change-ID: I8c75765c630eacb71f95967f1109a198542593ac Signed-off-by: Mitch Williams <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e: Move NVM variable out of AQ structShannon Nelson6-11/+11
The NVM update status info should stay collected together, not spread across different structs. Change-ID: Ic16f9e9fd79945d865bb7226184c889884585025 Signed-off-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e: Restrict VF poll mode to only single function mode devicesShannon Nelson1-1/+9
The VFs can request their queues to be set up into polling mode, rather than interrupt mode, which works well for supporting things like DPDK, but this should not be available when working in an multi-function support device. Change-ID: Id36792e4e7422db8f2033336507211f68f14ff6f Signed-off-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e: Patch to support trusted VFAnjali Singhai Jain3-0/+45
This patch adds hook to support changing a VF from not-trusted to trusted and vice-versa. Fixed the wrappers and function prototype. Changed the dmesg to reflex the current state better. This patch also disables turning on/off trusted VF in MFP mode. Change-ID: Ibcd910935c01f0be1f3fdd6d427230291ee92ebe Signed-off-by: Anjali Singhai Jain <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e/i40evf: Faster RX via avoiding FCoEJesse Brandeburg5-14/+30
As it turns out, calling into other files from hot path hurts performance a lot. In this case the majority of the time we call "check FCoE" and the packet is *not* FCoE, but this call was taking 5% of our total cycles spent on receive. Change-ID: I080552c26e7060bc7b78504dc2763f6f0b3d8c76 Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e/i40evf: Drop unused tx_ring argumentJesse Brandeburg2-8/+4
Some of the tx_ring arguments can be deleted since they are not used. Change-ID: I99275b0f191d7f63ec2f05061919904940c36f31 Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e/i40evf: Move stack var deeperJesse Brandeburg2-2/+4
A local variable could move down inside the context where it is used. Change-ID: I9caba9e1eacf921037077f2665cbce83fd8e95d6 Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e: Move HW flushAkeem G Abodunrin1-0/+1
This patch moves the HW flush routine to the end of the reset flow, after the completion of writing to the device VFLR registers- the benefit is to avoid problems in the passthrough routines. Change-ID: Ieb56866f21895e6c1fc514b7328c3df79807a57c Signed-off-by: Akeem G Abodunrin <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e: Leave debug_mask cleared at initShannon Nelson1-1/+0
Don't set our internal debug_mask at startup unless we get specific signal to from the debug module parameter. This should take care of the issue with all the device capabilities getting printed even when we hadn't asked for the debug info. Change-ID: I7fbc6bd8b11ed9b0631ec018ff36015a04100b6c Signed-off-by: Shannon Nelson <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06i40e: Inserting a HW capability display infoDeepthi Kavalur1-0/+3
Display MSIx vector count for HW capabilities. Change-ID: I4b41e9b50360cf660e7fbcb85b9390fedcf313b1 Signed-off-by: Deepthi Kavalur <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06Btrfs: fix file/data loss caused by fsync after rename and new inodeFilipe Manana1-0/+137
If we rename an inode A (be it a file or a directory), create a new inode B with the old name of inode A and under the same parent directory, fsync inode B and then power fail, at log tree replay time we end up removing inode A completely. If inode A is a directory then all its files are gone too. Example scenarios where this happens: This is reproducible with the following steps, taken from a couple of test cases written for fstests which are going to be submitted upstream soon: # Scenario 1 mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir -p /mnt/a/x echo "hello" > /mnt/a/x/foo echo "world" > /mnt/a/x/bar sync mv /mnt/a/x /mnt/a/y mkdir /mnt/a/x xfs_io -c fsync /mnt/a/x <power failure happens> The next time the fs is mounted, log tree replay happens and the directory "y" does not exist nor do the files "foo" and "bar" exist anywhere (neither in "y" nor in "x", nor the root nor anywhere). # Scenario 2 mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir /mnt/a echo "hello" > /mnt/a/foo sync mv /mnt/a/foo /mnt/a/bar echo "world" > /mnt/a/foo xfs_io -c fsync /mnt/a/foo <power failure happens> The next time the fs is mounted, log tree replay happens and the file "bar" does not exists anymore. A file with the name "foo" exists and it matches the second file we created. Another related problem that does not involve file/data loss is when a new inode is created with the name of a deleted snapshot and we fsync it: mkfs.btrfs -f /dev/sdc mount /dev/sdc /mnt mkdir /mnt/testdir btrfs subvolume snapshot /mnt /mnt/testdir/snap btrfs subvolume delete /mnt/testdir/snap rmdir /mnt/testdir mkdir /mnt/testdir xfs_io -c fsync /mnt/testdir # or fsync some file inside /mnt/testdir <power failure> The next time the fs is mounted the log replay procedure fails because it attempts to delete the snapshot entry (which has dir item key type of BTRFS_ROOT_ITEM_KEY) as if it were a regular (non-root) entry, resulting in the following error that causes mount to fail: [52174.510532] BTRFS info (device dm-0): failed to delete reference to snap, inode 257 parent 257 [52174.512570] ------------[ cut here ]------------ [52174.513278] WARNING: CPU: 12 PID: 28024 at fs/btrfs/inode.c:3986 __btrfs_unlink_inode+0x178/0x351 [btrfs]() [52174.514681] BTRFS: Transaction aborted (error -2) [52174.515630] Modules linked in: btrfs dm_flakey dm_mod overlay crc32c_generic ppdev xor raid6_pq acpi_cpufreq parport_pc tpm_tis sg parport tpm evdev i2c_piix4 proc [52174.521568] CPU: 12 PID: 28024 Comm: mount Tainted: G W 4.5.0-rc6-btrfs-next-27+ #1 [52174.522805] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [52174.524053] 0000000000000000 ffff8801df2a7710 ffffffff81264e93 ffff8801df2a7758 [52174.524053] 0000000000000009 ffff8801df2a7748 ffffffff81051618 ffffffffa03591cd [52174.524053] 00000000fffffffe ffff88015e6e5000 ffff88016dbc3c88 ffff88016dbc3c88 [52174.524053] Call Trace: [52174.524053] [<ffffffff81264e93>] dump_stack+0x67/0x90 [52174.524053] [<ffffffff81051618>] warn_slowpath_common+0x99/0xb2 [52174.524053] [<ffffffffa03591cd>] ? __btrfs_unlink_inode+0x178/0x351 [btrfs] [52174.524053] [<ffffffff81051679>] warn_slowpath_fmt+0x48/0x50 [52174.524053] [<ffffffffa03591cd>] __btrfs_unlink_inode+0x178/0x351 [btrfs] [52174.524053] [<ffffffff8118f5e9>] ? iput+0xb0/0x284 [52174.524053] [<ffffffffa0359fe8>] btrfs_unlink_inode+0x1c/0x3d [btrfs] [52174.524053] [<ffffffffa038631e>] check_item_in_log+0x1fe/0x29b [btrfs] [52174.524053] [<ffffffffa0386522>] replay_dir_deletes+0x167/0x1cf [btrfs] [52174.524053] [<ffffffffa038739e>] fixup_inode_link_count+0x289/0x2aa [btrfs] [52174.524053] [<ffffffffa038748a>] fixup_inode_link_counts+0xcb/0x105 [btrfs] [52174.524053] [<ffffffffa038a5ec>] btrfs_recover_log_trees+0x258/0x32c [btrfs] [52174.524053] [<ffffffffa03885b2>] ? replay_one_extent+0x511/0x511 [btrfs] [52174.524053] [<ffffffffa034f288>] open_ctree+0x1dd4/0x21b9 [btrfs] [52174.524053] [<ffffffffa032b753>] btrfs_mount+0x97e/0xaed [btrfs] [52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf [52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131 [52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde [52174.524053] [<ffffffffa032af81>] btrfs_mount+0x1ac/0xaed [btrfs] [52174.524053] [<ffffffff8108e1b7>] ? trace_hardirqs_on+0xd/0xf [52174.524053] [<ffffffff8108c262>] ? lockdep_init_map+0xb9/0x1b3 [52174.524053] [<ffffffff8117bafa>] mount_fs+0x67/0x131 [52174.524053] [<ffffffff81193003>] vfs_kern_mount+0x6c/0xde [52174.524053] [<ffffffff8119590f>] do_mount+0x8a6/0x9e8 [52174.524053] [<ffffffff811358dd>] ? strndup_user+0x3f/0x59 [52174.524053] [<ffffffff81195c65>] SyS_mount+0x77/0x9f [52174.524053] [<ffffffff814935d7>] entry_SYSCALL_64_fastpath+0x12/0x6b [52174.561288] ---[ end trace 6b53049efb1a3ea6 ]--- Fix this by forcing a transaction commit when such cases happen. This means we check in the commit root of the subvolume tree if there was any other inode with the same reference when the inode we are fsync'ing is a new inode (created in the current transaction). Test cases for fstests, covering all the scenarios given above, were submitted upstream for fstests: * fstests: generic test for fsync after renaming directory https://patchwork.kernel.org/patch/8694281/ * fstests: generic test for fsync after renaming file https://patchwork.kernel.org/patch/8694301/ * fstests: add btrfs test for fsync after snapshot deletion https://patchwork.kernel.org/patch/8670671/ Cc: [email protected] Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: Chris Mason <[email protected]>
2016-04-06Merge branch 'misc-4.6' of ↵Chris Mason8-33/+166
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.6
2016-04-07mailbox: pcc: Don't access an unmapped memory address spaceShanker Donthineni1-2/+2
The acpi_pcc_probe() may end up accessing memory outside of the PCCT table space causing the kernel panic(). Increment the pcct_entry pointer after parsing 'HW-reduced Communications Subspace' to fix the problem. This change also enables the parsing of subtable at index 0. Signed-off-by: Shanker Donthineni <[email protected]> Acked-by: Ashwin Chaugule <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-04-06e1000: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann3-6/+8
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06Merge branch 'mlxsw-dcb'David S. Miller8-50/+1381
Jiri Pirko says: ==================== mlxsw: Introduce support for Data Center Bridging Ido says: This patchset introduces support for Quality of Service (QoS) as part of the IEEE Data Center Bridiging (DCB) standards. Patches 1-9 do the required device initialization. Specifically, patches 1-6 initialize the ports' headroom buffers, which are used at ingress to store incoming packets while they go through the switch's pipeline. Patches 7-9 complete them by initializing the egress scheduling. The pipeline mentioned above determines the packet's egress port(s) and traffic class. Ideally, once out of the pipeline the packet moves to the switch's shared buffer (to be introduced in Jiri's patchset, currently default values are used) and scheduled for transmission according to its traffic class. The egress scheduling is configured according to the 802.1Qaz standard, which is part of the DCB infrastructure supported by Linux. This is introduced in patches 10-12. Even after going through the pipeline packets are not always eligible to enter the shared buffer. This is determined by the amount of available space and the quotas associated with the packet. However, if flow control is enabled and the packet is associated with the lossless flow, then it will stay in the headroom and won't be discarded. This is introduced in patches 13-17. Please check individual commit messages for more info, as I tried to keep them pretty detailed. ==================== Signed-off-by: David S. Miller <[email protected]>
2016-04-06mlxsw: spectrum: Add IEEE 802.1Qbb PFC supportIdo Schimmel4-11/+158
Implement the appropriate DCB ops and allow a user to configure certain traffic classes as lossless. The operation configures PFC for both the egress (respecting PFC frames) and ingress (sending PFC frames) parts of the port. At egress, when a PFC frame is received for a PFC enabled priority, then all the priorities mapped to the same TC are stopped. At ingress, the priority group (PG) buffers to which the enabled PFC priorities are mapped are configured to be lossless. PFC frames will be transmitted when the Xoff threshold is crossed. The user-supplied delay parameter is used to determine the PG's size according to the following formula: PG_SIZE = PG_SIZE_LOSSY + delay * CELL_FACTOR + MTU In the worst case scenario the delay will be made up of packets that are all of size CELL_SIZE + 1, which means each packet will require almost twice its true size when buffered in the switch. We therefore multiply this value by the "cell factor", which is close to 2. Another MTU is added in case the transmitting host already started transmitting a maximum length frame when the PFC packet was received. As with PAUSE enabled ports, when the port's MTU is changed both the PGs' size and threshold are adjusted accordingly. Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-04-06mlxsw: reg: Introduce per priority countersIdo Schimmel3-5/+63
We are going to add support for PFC as part of DCB ops, which requires us to report the number of PFC frames sent and received per priority. Add per priority counters in order to report number of PFC frames sent and received per priority. Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-04-06mlxsw: spectrum: Add support for PAUSE framesIdo Schimmel3-10/+95
When a packet ingress the switch it's placed in its assigned priority group (PG) buffer in the port's headroom buffer while it goes through the switch's pipeline. After going through the pipeline - which determines its egress port(s) and traffic class - it's moved to the switch's shared buffer awaiting transmission. However, some packets are not eligible to enter the shared buffer due to exceeded quotas or insufficient space. Marking their associated PGs as lossless will cause the packets to accumulate in the PG buffer. Another reason for packets accumulation are complicated pipelines (e.g. involving a lot of ACLs). To prevent packets from being dropped a user can enable PAUSE frames on the port. This will mark all the active PGs as lossless and set their size according to the maximum delay, as it's not configured by user. +----------------+ + | | | | | | | | | | | | | | | | | | Delay | | | | | | | | | | | | | | | Xon/Xoff threshold +----------------+ + | | | | | | 2 * MTU | | | +----------------+ + The delay (612 [Cells]) was calculated according to worst-case scenario involving maximum MTU and 100m cables. After marking the PGs as lossless the device is configured to respect incoming PAUSE frames (Rx PAUSE) and generate PAUSE frames (Tx PAUSE) according to user's settings. Whenever the port's headroom configuration changes we take into account the PAUSE configuration, so that we correctly set the PG's type (lossy / lossless), size and threshold. This can happen when: a) The port's MTU changes, as it directly affects the PG's size. b) A PG is created following user configuration, by binding a priority to it. Note that the relevant SUPPORTED flags were already mistakenly set by the driver before this commit. Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-04-06mlxsw: reg: Add lossless settings for PBMC registerIdo Schimmel1-0/+35
When configuring PAUSE frames and PFC we'll need to configure the Xon/Xoff threshold for the priority group (PG) buffers. Add the Xon/Xoff threshold fields to the PBMC register so that we can configure these when needed. Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.