| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The function brcmf_inform_single_bss returns the value as success,
even when the length exceeds the maximum value.
The fix is to send appropriate code on this error.
This issue is observed when Cypress test group reported random fmac
crashes when running their tests and the path was identified from the
crash logs. With this fix the random failure issue in Cypress test group
was resolved.
Reviewed-by: Arend van Spriel <[email protected]>
Signed-off-by: Raveendran Somu <[email protected]>
Signed-off-by: Chi-hsien Lin <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When the brcmf_fws_process_skb() fails to get hanger slot for
queuing the skb, it tries to free the skb.
But the caller brcmf_netdev_start_xmit() of that funciton frees
the packet on error return value.
This causes the double freeing and which caused the kernel crash.
Signed-off-by: Raveendran Somu <[email protected]>
Signed-off-by: Chi-hsien Lin <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
When the control transfer gets timed out, the error status
was returned without killing that urb, this leads to using
the same urb. This issue causes the kernel crash as the same
urb is sumbitted multiple times. The fix is to kill the
urb for timeout transfer before returning error
Signed-off-by: Raveendran Somu <[email protected]>
Signed-off-by: Chi-hsien Lin <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The nl80211 commands such as 'iw link' can't get current txrate
information from the driver. This commit fills in the tx rate
information from the C2H RA report in the sta_statistics function.
Signed-off-by: Chris Chiu <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
There's a data field in H2C and C2H commands which is used to
carry channel bandwidth information. Add enumeration to make it
more descriptive in code.
Signed-off-by: Chris Chiu <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Sometimes we need to stop the coex mechanism to debug, so that we
can manually control the device through various outer commands.
Hence, add a new debugfs coex_enable to allow us to enable/disable
the coex mechanism when driver is running.
To disable coex
echo 0 > /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable
To enable coex
echo 1 > /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable
To check coex dm is enabled or not
cat /sys/kernel/debug/ieee80211/phyX/rtw88/coex_enable
Signed-off-by: Yan-Hsuan Chuang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a new entry "coex_info" in debugfs to dump coex's states for
us to debug on coex's issues.
The basic concept for co-existence (coex, usually for WiFi + BT)
is to decide a strategy based on the current status of WiFi and
BT. So, it means the WiFi driver requires to gather information
from BT side and choose a strategy (TDMA/table/HW settings).
Althrough we can easily check the current status of WiFi, e.g.,
from kernel log or just dump the hardware registers, it is still
very difficult for us to gather so many different types of WiFi
states (such as RFE config, antenna, channel/band, TRX, Power
save). Also we will need BT's information that is stored in
"struct rtw_coex". So it is necessary for us to have a debugfs
that can dump all of the WiFi/BT information required.
Note that to debug on coex related issues, we usually need a
longer period of time of coex_info dump every 2 seconds (for
example, 30 secs, so we should have 15 times of coex_info's
dump).
Signed-off-by: Yan-Hsuan Chuang <[email protected]>
Reviewed-by: Chris Chiu <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Currently eswitch mode change is occurring from 2 different execution
contexts as below.
1. sriov sysfs enable/disable
2. devlink eswitch set commands
Both of them need to access eswitch related data structures in
synchronized manner.
Without any synchronization below race condition exist.
SR-IOV enable/disable with devlink eswitch mode change:
cpu-0 cpu-1
----- -----
mlx5_device_disable_sriov() mlx5_devlink_eswitch_mode_set()
mlx5_eswitch_disable() esw_offloads_stop()
esw_offloads_disable() mlx5_eswitch_disable()
esw_offloads_disable()
Hence, they are synchronized using a new mode_lock.
eswitch's state_lock is not used as it can lead to a deadlock scenario
below and state_lock is only for vport and fdb exclusive access.
ip link set vf <param>
netlink rcv_msg() - Lock A
rtnl_lock
vfinfo()
esw->state_lock() - Lock B
devlink eswitch_set
devlink_mutex
esw->state_lock() - Lock B
attach_netdev()
register_netdev()
rtnl_lock - Lock A
Alternatives considered:
1. Acquiring rtnl lock before taking esw->state_lock to follow similar
locking sequence as ip link flow during eswitch mode set.
rtnl lock is not good idea for two reasons.
(a) Holding rtnl lock for several hundred device commands is not good
idea.
(b) It leads to below and more similar deadlocks.
devlink eswitch_set
devlink_mutex
rtnl_lock - Lock A
esw->state_lock() - Lock B
eswitch_disable()
reload()
ib_register_device()
ib_cache_setup_one()
rtnl_lock()
2. Exporting devlink lock may lead to undesired use of it in vendor
driver(s) in future.
3. Unloading representors outside of the mode_lock requires
serialization with other process trying to enable the eswitch.
4. Differing the representors life cycle to a different workqueue
requires synchronization with func_change_handler workqueue.
Reviewed-by: Roi Dayan <[email protected]>
Reviewed-by: Bodong Wang <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Subsequent patch protects eswitch mode changes across sriov and devlink
interfaces. It is desirable for eswitch to provide thread safe eswitch
enable and disable APIs.
Hence, extend eswitch enable API to optionally update num_vfs when
requested.
In subsequent patch, eswitch num_vfs are updated after all the eswitch
users eswitch drops its reference count.
Reviewed-by: Roi Dayan <[email protected]>
Reviewed-by: Bodong Wang <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
In order to check eswitch state under a lock, prepare code to split
capability check and eswitch state check into two helper functions.
Reviewed-by: Roi Dayan <[email protected]>
Reviewed-by: Bodong Wang <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
devlink_nl_cmd_eswitch_set_doit() doesn't hold devlink->lock mutex while
invoking driver callback. This is likely due to eswitch mode setting
involves adding/remove devlink ports, health reporters or
other devlink objects for a devlink device.
So it is driver responsiblity to ensure thread safe eswitch state
transition happening via either sriov legacy enablement or via devlink
eswitch set callback.
Therefore, get() callback should also be invoked without holding
devlink->lock mutex.
Vendor driver can use same internal lock which it uses during eswitch
mode set() callback.
This makes get() and set() implimentation symmetric in devlink core and
in vendor drivers.
Hence, remove holding devlink->lock mutex during eswitch get() callback.
Failing to do so results into below deadlock scenario when mlx5_core
driver is improved to handle eswitch mode set critical section invoked
by devlink and sriov sysfs interface in subsequent patch.
devlink_nl_cmd_eswitch_set_doit()
mlx5_eswitch_mode_set()
mutex_lock(esw->mode_lock) <- Lock A
[...]
register_devlink_port()
mutex_lock(&devlink->lock); <- lock B
mutex_lock(&devlink->lock); <- lock B
devlink_nl_cmd_eswitch_get_doit()
mlx5_eswitch_mode_get()
mutex_lock(esw->mode_lock) <- Lock A
In subsequent patch, mlx5_core driver uses its internal lock during
get() and set() eswitch callbacks.
Other drivers have been inspected which returns either constant during
get operations or reads the value from already allocated structure.
Hence it is safe to remove the lock in get( ) callback and let vendor
driver handle it.
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
mlx5_unload_one() always returns 0.
Simplify callers of mlx5_unload_one() and remove the dead code.
Reviewed-by: Moshe Shemesh <[email protected]>
Signed-off-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
mlx5_register_device() doesn't check for any error and always returns 0.
Simplify mlx5_register_device() to return void and its caller, remove
dead code related to it.
Reviewed-by: Moshe Shemesh <[email protected]>
Signed-off-by: Parav Pandit <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Group version is used when modifying a rule is allowed
(FLOW_ACT_NO_APPEND is clear) to detect a case where the rule was found
but while the groups where unlocked a new FTE was added. In this case,
the added FTE could be one with identical match value so we need to
attempt again with group lock held.
Change the code so version is retrieved only when FLOW_ACT_NO_APPEND is
cleared. As result, later compare can also be avoided if FLOW_ACT_NO_APPEND
is cleared.
Also improve comments text.
Signed-off-by: Eli Cohen <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
FTE version is not used anywhere in the code so avoid incrementing it.
Signed-off-by: Eli Cohen <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
When adding a rule to a flow group we need increment the version of the
group. Current code fails to do that and as a result, when trying to add
a rule, we will fail to discover a case where an FTE with the same match
value was added while we scanned the groups of the same match criteria,
thus we may try to add an FTE that was already added.
Signed-off-by: Eli Cohen <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Instead of using two different structs for searching groups with the
same match, use a single struct and thus simplify the code, make it more
readable and smaller size which means less code cache misses.
text data bss dec hex
before: 35524 2744 0 38268 957c
after: 35038 2744 0 37782 9396
When testing add 70000 rules, delete all the rules, and repeat three
times taking the average, we get (time in seconds):
Before the change: insert 16.80, delete 11.02
After the change: insert 16.55, delete 10.95
Signed-off-by: Eli Cohen <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
The correct type is u32.
Fixes: d18296ffd9cc ("net/mlx5: E-Switch, Introduce global tables")
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Paul Blakey <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
We allocate a temporary memory but forget to free it.
Fixes: 11b717d61526 ("net/mlx5: E-Switch, Get reg_c0 value on CQE")
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Paul Blakey <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Register c0 loopback is needed to fully support chains and prios.
Enable chains and prio only if loopback (of reg c1 which came together
with c0), is enabled. To be able to check that, move enabling of loopback
before eswitch chains init.
Signed-off-by: Paul Blakey <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Reg c0/c1 matching, rewrite of regs c0/c1, and copy header of regs c1,B
is needed for the restore table to function, might not be supported by
firmware, and creation of the restore table or the copy header will
fail.
Check reg_c1 loopback support, as firmware which supports this,
should have all of the above.
Fixes: 11b717d61526 ("net/mlx5: E-Switch, Get reg_c0 value on CQE")
Signed-off-by: Paul Blakey <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
The function mlx5e_rep_setup_ft_cb check chain_index is zero twice.
Signed-off-by: wenxu <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
The actions_match_supported() function returns a bool, true for success
and false for failure. This error path is returning a negative which
is cast to true but it should return false.
Fixes: 4c3844d9e97e ("net/mlx5e: CT: Introduce connection tracking")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Overlapping header include additions in macsec.c
A bug fix in 'net' overlapping with the removal of 'version'
string in ena_netdev.c
Overlapping test additions in selftests Makefile
Overlapping PCI ID table adjustments in iwlwifi driver.
Signed-off-by: David S. Miller <[email protected]>
|
|
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes: 666aed2d13ee ("clk: imx: scu: add set parent support")
Signed-off-by: Leonard Crestez <[email protected]>
Link: https://lkml.kernel.org/r/aad021e432b3062c142973d09b766656eec18fde.1582216144.git.leonard.crestez@nxp.com
Signed-off-by: Stephen Boyd <[email protected]>
|
|
The imx SC api strongly assumes that messages are composed out of
4-bytes words but some of our message structs have odd sizeofs.
This produces many oopses with CONFIG_KASAN=y.
Fix by marking with __aligned(4).
Fixes: fe37b4820417 ("clk: imx: add scu clock common part")
Signed-off-by: Leonard Crestez <[email protected]>
Link: https://lkml.kernel.org/r/10e97a04980d933b2cfecb6b124bf9046b6e4f16.1582216144.git.leonard.crestez@nxp.com
Signed-off-by: Stephen Boyd <[email protected]>
|
|
I copy/pasted these macros and forgot to update the argument
names and where they're passed to. Fix it so that these macros make
sense.
Reported-by: Maxime Ripard <[email protected]>
Fixes: 194efb6e2667 ("clk: gate: Add support for specifying parents via DT/pointers")
Signed-off-by: Stephen Boyd <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Tested-by: Maxime Ripard <[email protected]>
|
|
This uses the DEFER_SETUP flag to group channels with
L2CAP_CREDIT_BASED_CONNECTION_REQ.
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
|
|
Pull networking fixes from David Miller:
1) Fix deadlock in bpf_send_signal() from Yonghong Song.
2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan.
3) Add missing locking in iwlwifi mvm code, from Avraham Stern.
4) Fix MSG_WAITALL handling in rxrpc, from David Howells.
5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong
Wang.
6) Fix producer race condition in AF_PACKET, from Willem de Bruijn.
7) cls_route removes the wrong filter during change operations, from
Cong Wang.
8) Reject unrecognized request flags in ethtool netlink code, from
Michal Kubecek.
9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from
Doug Berger.
10) Don't leak ct zone template in act_ct during replace, from Paul
Blakey.
11) Fix flushing of offloaded netfilter flowtable flows, also from Paul
Blakey.
12) Fix throughput drop during tx backpressure in cxgb4, from Rahul
Lakkireddy.
13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric
Dumazet.
14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well,
also from Eric Dumazet.
15) Restrict macsec to ethernet devices, from Willem de Bruijn.
16) Fix reference leak in some ethtool *_SET handlers, from Michal
Kubecek.
17) Fix accidental disabling of MSI for some r8169 chips, from Heiner
Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build
net: ena: Add PCI shutdown handler to allow safe kexec
selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED
selftests/net: add missing tests to Makefile
r8169: re-enable MSI on RTL8168c
net: phy: mdio-bcm-unimac: Fix clock handling
cxgb4/ptp: pass the sign of offset delta in FW CMD
net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop
net: cbs: Fix software cbs to consider packet sending time
net/mlx5e: Do not recover from a non-fatal syndrome
net/mlx5e: Fix ICOSQ recovery flow with Striding RQ
net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset
net/mlx5e: Enhance ICOSQ WQE info fields
net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure
selftests: netfilter: add nfqueue test case
netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
netfilter: nft_fwd_netdev: validate family and chain type
netfilter: nft_set_rbtree: Detect partial overlaps on insertion
netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()
netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- One core quirk by myself to fix the .irq_disable() semantics when the
gpiolib core takes over this callback.
- The rest is an elaborate series of four patches fixing Intel laptop
ACPI wakeup quirks.
* tag 'gpio-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 model
gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 BYT + AXP288 model
gpiolib: acpi: Rework honor_wakeup option into an ignore_wake option
gpiolib: acpi: Correct comment for HP x2 10 honor_wakeup quirk
gpiolib: Fix irq_disable() semantics
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.6
Fourth, and last, set of fixes for v5.6. Just two important fixes to
iwlwifi regressions.
iwlwifi
* fix GEO_TX_POWER_LIMIT command on certain devices which caused
firmware to crash during initialisation
* add back device ids for three devices which were accidentally
removed
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
net/netfilter/nft_fwd_netdev.c: In function ‘nft_fwd_netdev_eval’:
net/netfilter/nft_fwd_netdev.c:32:10: error: ‘struct sk_buff’ has no member named ‘tc_redirected’
pkt->skb->tc_redirected = 1;
^~
net/netfilter/nft_fwd_netdev.c:33:10: error: ‘struct sk_buff’ has no member named ‘tc_from_ingress’
pkt->skb->tc_from_ingress = 1;
^~
To avoid a direct dependency with tc actions from netfilter, wrap the
redirect bits around CONFIG_NET_REDIRECT and move helpers to
include/linux/skbuff.h. Turn on this toggle from the ifb driver, the
only existing client of these bits in the tree.
This patch adds skb_set_redirected() that sets on the redirected bit
on the skbuff, it specifies if the packet was redirect from ingress
and resets the timestamp (timestamp reset was originally missing in the
netfilter bugfix).
Fixes: bcfabee1afd99484 ("netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress")
Reported-by: [email protected]
Reported-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This commit adds support to catch any bits set in SGE_INT_CAUSE5 for Parity Errors.
F_ERR_T_RXCRC flag is used to ignore that particular bit as it is not considered as fatal.
So, we clear out the bit before looking for error.
This patch now read and report separately all three registers(Cause1, Cause2, Cause5).
Also, checks for errors if any.
Signed-off-by: Raju Rangoju <[email protected]>
Signed-off-by: Rahul Kundu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Sunil Goutham says:
====================
octeontx2-pf: Miscellaneous fixes
This patchset fixes couple of issues related to missing
page refcount updation and taking a mutex lock in atomic
context.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Since set_rx_mode takes a mutex lock for sending mailbox
message to admin function to set the mode, moved logic
to a workqueue.
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fixed an issue wherein while refilling receive buffers
for the last page allocated, recount is not being updated.
Signed-off-by: Sunil Goutham <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Julian Wiedmann says:
====================
s390/qeth: updates 2020-03-25
please apply the following patch series for qeth to netdev's net-next
tree.
Same series as yesterday, with one minor update to patch 1 as per
your review.
This adds
1) NAPI poll support for the async-Completion Queue (with one qdio layer
patch acked by Heiko),
2) ethtool support for per-queue TX IRQ coalescing,
3) various cleanups.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Replace list_for_each() with list_for_each_entry(), and
list_entry(head.next) with list_first_entry().
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When a device is configured in prio-queue mode to pin all traffic onto
a specific HW queue, treat this as a distinct variant of prio-queueing
instead of QETH_NO_PRIO_QUEUEING.
This corrects an error message from qeth_osa_set_output_queues() for
devices configured in such a mode.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Return the correct errnos when .ndo_set_mac_address fails to set a new
MAC address.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since IQD devices complete (most of) their transmissions synchronously,
they don't offer TX completion IRQs and have no HW coalescing controls.
But we can fake the easy parts in SW, and give the user some control wrt
to how often the TX NAPI code should be triggered to process the TX
completions.
Having per-queue controls can in particular help the dedicated mcast
queue, as it likely benefits from different fine-tuning than what the
ucast queues need.
CC: Jakub Kicinski <[email protected]>
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Count the number of TX doorbells we issue to the qdio layer.
Also count the number of actual frames in a TX buffer, and then
use this data along with the byte count during TX completion.
We'll make additional use of the frame count in a subsequent patch.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
We're down to a single bit flag for MAC-address related status, reflect
that in the info struct.
Also set up the flag during initialization instead of clearing it during
shutdown - one more little step towards unifying the shutdown code.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The logic that deals with errors from qeth_l3_get_unique_id() is quite
complex: it sets card->unique_id to 0xfffe, additionally flags it as
UNIQUE_ID_NOT_BY_CARD and later takes this flag as cue to not propagate
card->unique_id to dev->dev_id. With dev->dev_id thus holding 0,
addrconf_ifid_eui48() applies its default behaviour.
Get rid of all the special bit masks, and just return the old uid in
case of an error. For the vast majority of cases this will be 0 (and so
we still get the desired default behaviour) - with the rare exception
where qeth_l3_get_unique_id() might have been called earlier but the
initialization then failed at a later point.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When the support for polling drivers was initially added, it only
considered Input Queue 0. But as QDIO interrupts are actually for the
full device and not a single queue, this doesn't really fit for
configurations where multiple Input Queues are used.
Rework the qdio code so that interrupts for a polling driver are not
split up into actions for each queue. Instead deliver the interrupt as
a single event, and let the driver decide which queue needs what action.
When re-enabling the QDIO interrupt via qdio_start_irq(), this means
that the qdio code needs to
(1) put _all_ eligible queues back into a state where they raise IRQs,
(2) and afterwards check _all_ eligible queues for new work to bridge
the race window.
On the qeth side of things (as the only qdio polling driver), we can now
add CQ polling support to the main NAPI poll routine. It doesn't consume
NAPI budget, and to avoid hogging the CPU we yield control after
completing one full queue worth of buffers.
The subsequent qdio_start_irq() will check for any additional work, and
have us re-schedule the NAPI instance accordingly.
Signed-off-by: Julian Wiedmann <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Whenever all completed RX buffers have been processed
(ie. rx->b_count == 0), we call down to the HW layer to scan for
additional buffers. If no further buffers are available, the code
breaks out of the while-loop.
So we never reach the 'process an RX buffer' step with rx->b_count == 0,
eliminate that check and one level of indentation.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The main NAPI poll routine should eventually handle more types of work,
beyond just the RX ring.
Split off the RX poll logic into a separate function, and simplify the
nested while-loop.
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since RX buffers may contain multiple packets, qeth's NAPI poll code can
exhaust its budget in the middle of an RX buffer. Thus we keep track of
our current position within the active RX buffer, so we can resume
processing here in the next NAPI poll period.
Clean up that code by tracking the index of the active buffer element,
instead of a pointer to it.
Also simplify the code that advances to the next RX buffer when the
current buffer has been fully processed.
v2: - remove QDIO_ELEMENT_NO() macro (davem)
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently ENA only provides the PCI remove() handler, used during rmmod
for example. This is not called on shutdown/kexec path; we are potentially
creating a failure scenario on kexec:
(a) Kexec is triggered, no shutdown() / remove() handler is called for ENA;
instead pci_device_shutdown() clears the master bit of the PCI device,
stopping all DMA transactions;
(b) Kexec reboot happens and the device gets enabled again, likely having
its FW with that DMA transaction buffered; then it may trigger the (now
invalid) memory operation in the new kernel, corrupting kernel memory area.
This patch aims to prevent this, by implementing a shutdown() handler
quite similar to the remove() one - the difference being the handling
of the netdev, which is unregistered on remove(), but following the
convention observed in other drivers, it's only detached on shutdown().
This prevents an odd issue in AWS Nitro instances, in which after the 2nd
kexec the next one will fail with an initrd corruption, caused by a wild
DMA write to invalid kernel memory. The lspci output for the adapter
present in my instance is:
00:05.0 Ethernet controller [0200]: Amazon.com, Inc. Elastic Network
Adapter (ENA) [1d0f:ec20]
Suggested-by: Gavin Shan <[email protected]>
Signed-off-by: Guilherme G. Piccoli <[email protected]>
Acked-by: Sameeh Jubran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The lib files should not be defined as TEST_PROGS, or we will run them
in run_kselftest.sh.
Also remove ethtool_lib.sh exec permission.
Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|