aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-10-10ALSA: usb-audio: Kill stray URB at exitingTakashi Iwai2-2/+12
USB-audio driver may leave a stray URB for the mixer interrupt when it exits by some error during probe. This leads to a use-after-free error as spotted by syzkaller like: ================================================================== BUG: KASAN: use-after-free in snd_usb_mixer_interrupt+0x604/0x6f0 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x23d/0x350 mm/kasan/report.c:409 __asan_report_load8_noabort+0x19/0x20 mm/kasan/report.c:430 snd_usb_mixer_interrupt+0x604/0x6f0 sound/usb/mixer.c:2490 __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779 .... Allocated by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:551 kmem_cache_alloc_trace+0x11e/0x2d0 mm/slub.c:2772 kmalloc ./include/linux/slab.h:493 kzalloc ./include/linux/slab.h:666 snd_usb_create_mixer+0x145/0x1010 sound/usb/mixer.c:2540 create_standard_mixer_quirk+0x58/0x80 sound/usb/quirks.c:516 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 create_composite_quirk+0x1c4/0x3e0 sound/usb/quirks.c:59 snd_usb_create_quirk+0x92/0x100 sound/usb/quirks.c:560 usb_audio_probe+0x1040/0x2c10 sound/usb/card.c:618 .... Freed by task 1484: save_stack_trace+0x1b/0x20 arch/x86/kernel/stacktrace.c:59 save_stack+0x43/0xd0 mm/kasan/kasan.c:447 set_track mm/kasan/kasan.c:459 kasan_slab_free+0x72/0xc0 mm/kasan/kasan.c:524 slab_free_hook mm/slub.c:1390 slab_free_freelist_hook mm/slub.c:1412 slab_free mm/slub.c:2988 kfree+0xf6/0x2f0 mm/slub.c:3919 snd_usb_mixer_free+0x11a/0x160 sound/usb/mixer.c:2244 snd_usb_mixer_dev_free+0x36/0x50 sound/usb/mixer.c:2250 __snd_device_free+0x1ff/0x380 sound/core/device.c:91 snd_device_free_all+0x8f/0xe0 sound/core/device.c:244 snd_card_do_free sound/core/init.c:461 release_card_device+0x47/0x170 sound/core/init.c:181 device_release+0x13f/0x210 drivers/base/core.c:814 .... Actually such a URB is killed properly at disconnection when the device gets probed successfully, and what we need is to apply it for the error-path, too. In this patch, we apply snd_usb_mixer_disconnect() at releasing. Also introduce a new flag, disconnected, to struct usb_mixer_interface for not performing the disconnection procedure twice. Reported-by: Andrey Konovalov <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-10-10device property: Track owner device of device propertyJarkko Nikula1-6/+9
Deletion of subdevice will remove device properties associated to parent when they share the same firmware node after commit 478573c93abd (driver core: Don't leak secondary fwnode on device removal). This was observed with a driver adding subdevice that driver wasn't able to read device properties after rmmod/modprobe cycle. Consider the lifecycle of it: parent device registration ACPI_COMPANION_SET() device_add_properties() pset_copy_set() set_secondary_fwnode(dev, &p->fwnode) device_add() parent probe read device properties ACPI_COMPANION_SET(subdevice, ACPI_COMPANION(parent)) device_add(subdevice) parent remove device_del(subdevice) device_remove_properties() set_secondary_fwnode(dev, NULL); pset_free() Parent device will have its primary firmware node pointing to an ACPI node and secondary firmware node point to device properties. ACPI_COMPANION_SET() call in parent probe will set the subdevice's firmware node to point to the same 'struct fwnode_handle' and the associated secondary firmware node, i.e. the device properties as the parent. When subdevice is deleted in parent remove that will remove those device properties and attempt to read device properties in next parent probe call will fail. Fix this by tracking the owner device of device properties and delete them only when owner device is being deleted. Fixes: 478573c93abd (driver core: Don't leak secondary fwnode on device removal) Cc: 4.9+ <[email protected]> # 4.9+ Signed-off-by: Jarkko Nikula <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2017-10-09Merge branch 'ppc-bundle' (bundle from Michael Ellerman)Linus Torvalds2-2/+35
Merge powerpc transactional memory fixes from Michael Ellerman: "I figured I'd still send you the commits using a bundle to make sure it works in case I need to do it again in future" This fixes transactional memory state restore for powerpc. * bundle'd patches from Michael Ellerman: powerpc/tm: Fix illegal TM state in signal handler powerpc/64s: Use emergency stack for kernel TM Bad Thing program checks
2017-10-09waitid(): Add missing access_ok() checksKees Cook1-0/+6
Adds missing access_ok() checks. CVE-2017-5123 Reported-by: Chris Salls <[email protected]> Signed-off-by: Kees Cook <[email protected]> Acked-by: Al Viro <[email protected]> Fixes: 4c48abe91be0 ("waitid(): switch copyout of siginfo to unsafe_put_user()") Cc: [email protected] # 4.13 Signed-off-by: Linus Torvalds <[email protected]>
2017-10-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds54-164/+211
Pull networking fixes from David Miller: 1) Fix object leak on IPSEC offload failure, from Steffen Klassert. 2) Fix range checks in ipset address range addition operations, from Jozsef Kadlecsik. 3) Fix pernet ops unregistration order in ipset, from Florian Westphal. 4) Add missing netlink attribute policy for nl80211 packet pattern attrs, from Peng Xu. 5) Fix PPP device destruction race, from Guillaume Nault. 6) Write marks get lost when BPF verifier processes R1=R2 register assignments, causing incorrect liveness information and less state pruning. Fix from Alexei Starovoitov. 7) Fix blockhole routes so that they are marked dead and therefore not cached in sockets, otherwise IPSEC stops working. From Steffen Klassert. 8) Fix broadcast handling of UDP socket early demux, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits) cdc_ether: flag the u-blox TOBY-L2 and SARA-U2 as wwan net: thunderx: mark expected switch fall-throughs in nicvf_main() udp: fix bcast packet reception netlink: do not set cb_running if dump's start() errs ipv4: Fix traffic triggered IPsec connections. ipv6: Fix traffic triggered IPsec connections. ixgbe: incorrect XDP ring accounting in ethtool tx_frame param net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag Revert commit 1a8b6d76dc5b ("net:add one common config...") ixgbe: fix masking of bits read from IXGBE_VXLANCTRL register ixgbe: Return error when getting PHY address if PHY access is not supported netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1' netfilter: SYNPROXY: skip non-tcp packet in {ipv4, ipv6}_synproxy_hook tipc: Unclone message at secondary destination lookup tipc: correct initialization of skb list gso: fix payload length when gso_size is zero mlxsw: spectrum_router: Avoid expensive lookup during route removal bpf: fix liveness marking doc: Fix typo "8023.ad" in bonding documentation ipv6: fix net.ipv6.conf.all.accept_dad behaviour for real ...
2017-10-09cdc_ether: flag the u-blox TOBY-L2 and SARA-U2 as wwanAleksander Morgado1-0/+13
The u-blox TOBY-L2 is a LTE Cat 4 module with HSPA+ and 2G fallback. This module allows switching to different USB profiles with the 'AT+UUSBCONF' command, and provides a ECM network interface when the 'AT+UUSBCONF=2' profile is selected. The u-blox SARA-U2 is a HSPA module with 2G fallback. The default USB configuration includes a ECM network interface. Both these modules are controlled via AT commands through one of the TTYs exposed. Connecting these modules may be done just by activating the desired PDP context with 'AT+CGACT=1,<cid>' and then running DHCP on the ECM interface. Signed-off-by: Aleksander Morgado <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-09Merge tag 'nfs-for-4.14-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds6-8/+8
Pull NFS client bugfixes from Trond Myklebust: "Hightlights include: stable fixes: - nfs/filelayout: fix oops when freeing filelayout segment - NFS: Fix uninitialized rpc_wait_queue bugfixes: - NFSv4/pnfs: Fix an infinite layoutget loop - nfs: RPC_MAX_AUTH_SIZE is in bytes" * tag 'nfs-for-4.14-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4/pnfs: Fix an infinite layoutget loop nfs/filelayout: fix oops when freeing filelayout segment sunrpc: remove redundant initialization of sock NFS: Fix uninitialized rpc_wait_queue NFS: Cleanup error handling in nfs_idmap_request_key() nfs: RPC_MAX_AUTH_SIZE is in bytes
2017-10-09net: thunderx: mark expected switch fall-throughs in nicvf_main()Gustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Cc: Sunil Goutham <[email protected]> Cc: Robert Richter <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller26-64/+107
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) Fix packet drops due to incorrect ECN handling in IPVS, from Vadim Fedorenko. 2) Fix splat with mark restoration in xt_socket with non-full-sock, patch from Subash Abhinov Kasiviswanathan. 3) ipset bogusly bails out when adding IPv4 range containing more than 2^31 addresses, from Jozsef Kadlecsik. 4) Incorrect pernet unregistration order in ipset, from Florian Westphal. 5) Races between dump and swap in ipset results in BUG_ON splats, from Ross Lagerwall. 6) Fix chain renames in nf_tables, from JingPiao Chen. 7) Fix race in pernet codepath with ebtables table registration, from Artem Savkov. 8) Memory leak in error path in set name allocation in nf_tables, patch from Arvind Yadav. 9) Don't dump chain counters if they are not available, this fixes a crash when listing the ruleset. 10) Fix out of bound memory read in strlcpy() in x_tables compat code, from Eric Dumazet. 11) Make sure we only process TCP packets in SYNPROXY hooks, patch from Lin Zhang. 12) Cannot load rules incrementally anymore after xt_bpf with pinned objects, added in revision 1. From Shmulik Ladkani. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-10-09Merge branch '10GbE' of ↵David S. Miller6-54/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2017-10-09 This series contains updates to ixgbe and arch/Kconfig. Mark fixes a case where PHY register access is not supported and we were returning a PHY address, when we should have been returning -EOPNOTSUPP. Sabrina Dubroca fixes the use of a logical "and" when it should have been the bitwise "and" operator. Ding Tianhong reverts the commit that added the Kconfig bool option ARCH_WANT_RELAX_ORDER, since there is now a new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING that has been added to indicate that Relaxed Ordering Attributes should not be used for Transaction Layer Packets. Then follows up with making the needed changes to ixgbe to use the new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag. John Fastabend fixes an issue in the ring accounting when the transmit ring parameters are changed via ethtool when an XDP program is attached. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-10-09udp: fix bcast packet receptionPaolo Abeni1-9/+5
The commit bc044e8db796 ("udp: perform source validation for mcast early demux") does not take into account that broadcast packets lands in the same code path and they need different checks for the source address - notably, zero source address are valid for bcast and invalid for mcast. As a result, 2nd and later broadcast packets with 0 source address landing to the same socket are dropped. This breaks dhcp servers. Since we don't have stringent performance requirements for ingress broadcast traffic, fix it by disabling UDP early demux such traffic. Reported-by: Hannes Frederic Sowa <[email protected]> Fixes: bc044e8db796 ("udp: perform source validation for mcast early demux") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-09netlink: do not set cb_running if dump's start() errsJason A. Donenfeld1-6/+7
It turns out that multiple places can call netlink_dump(), which means it's still possible to dereference partially initialized values in dump() that were the result of a faulty returned start(). This fixes the issue by calling start() _before_ setting cb_running to true, so that there's no chance at all of hitting the dump() function through any indirect paths. It also moves the call to start() to be when the mutex is held. This has the nice side effect of serializing invocations to start(), which is likely desirable anyway. It also prevents any possible other races that might come out of this logic. In testing this with several different pieces of tricky code to trigger these issues, this commit fixes all avenues that I'm aware of. Signed-off-by: Jason A. Donenfeld <[email protected]> Cc: Johannes Berg <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-09Merge tag 'mac80211-for-davem-2017-10-09' of ↵David S. Miller1-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== pull-request: mac80211 2017-10-09 The QCA folks found another netlink problem - we were missing validation of some attributes. It's not super problematic since one can only read a few bytes beyond the message (and that memory must exist), but here's the fix for it. I thought perhaps we can make nla_parse_nested() require a policy, but given the two-stage validation/parsing in regular netlink that won't work. Please pull and let me know if there's any problem. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-10-09Merge branch 'master' of ↵David S. Miller4-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2017-10-09 1) Fix some error paths of the IPsec offloading API. 2) Fix a NULL pointer dereference when IPsec is used with vti. From Alexey Kodanev. 3) Don't call xfrm_policy_cache_flush under xfrm_state_lock, it triggers several locking warnings. From Artem Savkov. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-10-09ipv4: Fix traffic triggered IPsec connections.Steffen Klassert1-1/+1
A recent patch removed the dst_free() on the allocated dst_entry in ipv4_blackhole_route(). The dst_free() marked the dst_entry as dead and added it to the gc list. I.e. it was setup for a one time usage. As a result we may now have a blackhole route cached at a socket on some IPsec scenarios. This makes the connection unusable. Fix this by marking the dst_entry directly at allocation time as 'dead', so it is used only once. Fixes: b838d5e1c5b6 ("ipv4: mark DST_NOGC and remove the operation of dst_free()") Reported-by: Tobias Brunner <[email protected]> Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-09ipv6: Fix traffic triggered IPsec connections.Steffen Klassert1-1/+1
A recent patch removed the dst_free() on the allocated dst_entry in ipv6_blackhole_route(). The dst_free() marked the dst_entry as dead and added it to the gc list. I.e. it was setup for a one time usage. As a result we may now have a blackhole route cached at a socket on some IPsec scenarios. This makes the connection unusable. Fix this by marking the dst_entry directly at allocation time as 'dead', so it is used only once. Fixes: 587fea741134 ("ipv6: mark DST_NOGC and remove the operation of dst_free()") Reported-by: Tobias Brunner <[email protected]> Signed-off-by: Steffen Klassert <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-09ixgbe: incorrect XDP ring accounting in ethtool tx_frame paramJohn Fastabend1-8/+8
Changing the TX ring parameters with an XDP program attached may cause the XDP queues to be cleared and the TX rings to be incorrectly configured. Fix by doing correct ring accounting in setup call. Fixes: 33fdc82f0883 ("ixgbe: add support for XDP_TX action") Signed-off-by: John Fastabend <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-10-09net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flagDing Tianhong2-41/+0
The ixgbe driver use the compile check to determine if it can send TLPs to Root Port with the Relaxed Ordering Attribute set, this is too inconvenient, now the new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING has been added to the kernel and we could check the bit4 in the PCIe Device Control register to determine whether we should use the Relaxed Ordering Attributes or not, so use this new way in the ixgbe driver. Signed-off-by: Ding Tianhong <[email protected]> Acked-by: Emil Tantilov <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-10-09Revert commit 1a8b6d76dc5b ("net:add one common config...")Ding Tianhong3-5/+1
The new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING has been added to indicate that Relaxed Ordering Attributes (RO) should not be used for Transaction Layer Packets (TLP) targeted toward these affected Root Port, it will clear the bit4 in the PCIe Device Control register, so the PCIe device drivers could query PCIe configuration space to determine if it can send TLPs to Root Port with the Relaxed Ordering Attributes set. With this new flag we don't need the config ARCH_WANT_RELAX_ORDER to control the Relaxed Ordering Attributes for the ixgbe drivers just like the commit 1a8b6d76dc5b ("net:add one common config...") did, so revert this commit. Signed-off-by: Ding Tianhong <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-10-09ixgbe: fix masking of bits read from IXGBE_VXLANCTRL registerSabrina Dubroca1-1/+1
In ixgbe_clear_udp_tunnel_port(), we read the IXGBE_VXLANCTRL register and then try to mask some bits out of the value, using the logical instead of bitwise and operator. Fixes: a21d0822ff69 ("ixgbe: add support for geneve Rx offload") Signed-off-by: Sabrina Dubroca <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-10-09ixgbe: Return error when getting PHY address if PHY access is not supportedMark D Rustad1-0/+4
In cases where PHY register access is not supported, don't mislead a caller into thinking that it is supported by returning a PHY address. Instead, return -EOPNOTSUPP when PHY access is not supported. Signed-off-by: Mark Rustad <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-10-09ALSA: line6: Fix leftover URB at error-path during probeTakashi Iwai1-3/+4
While line6_probe() may kick off URB for a control MIDI endpoint, the function doesn't clean up it properly at its error path. This results in a leftover URB action that is eventually triggered later and causes an Oops like: general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 0 Comm: swapper/1 Not tainted RIP: 0010:usb_fill_bulk_urb ./include/linux/usb.h:1619 RIP: 0010:line6_start_listen+0x3fe/0x9e0 sound/usb/line6/driver.c:76 Call Trace: <IRQ> line6_data_received+0x1f7/0x470 sound/usb/line6/driver.c:326 __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779 usb_hcd_giveback_urb+0x337/0x420 drivers/usb/core/hcd.c:1845 dummy_timer+0xba9/0x39f0 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x2a2/0x940 kernel/time/timer.c:1281 .... Since the whole clean-up procedure is done in line6_disconnect() callback, we can simply call it in the error path instead of open-coding the whole again. It'll fix such an issue automagically. The bug was spotted by syzkaller. Fixes: eedd0e95d355 ("ALSA: line6: Don't forget to call driver's destructor at error path") Reported-by: Andrey Konovalov <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-10-09ALSA: line6: Fix NULL dereference at podhd_disconnect()Takashi Iwai1-1/+2
When podhd_init() failed with the acquiring a ctrl i/f, the line6 helper still calls the disconnect callback that eventually calls again usb_driver_release_interface() with the NULL intf. Put the proper NULL check before calling it for avoiding an Oops. Fixes: fc90172ba283 ("ALSA: line6: Claim pod x3 usb data interface") Reported-by: Andrey Konovalov <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-10-09ALSA: line6: Fix missing initialization before error pathTakashi Iwai1-2/+3
The error path in podhd_init() tries to clear the pending timer, while the timer object is initialized at the end of init sequence, thus it may hit the uninitialized object, as spotted by syzkaller: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 1845 Comm: kworker/1:2 Not tainted 4.14.0-rc2-42613-g1488251d1a98 #238 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769 __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385 lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002 del_timer_sync+0x12c/0x280 kernel/time/timer.c:1237 podhd_disconnect+0x8c/0x160 sound/usb/line6/podhd.c:299 line6_probe+0x844/0x1310 sound/usb/line6/driver.c:783 podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474 .... For addressing it, assure the initializations of timer and work by moving them to the beginning of podhd_init(). Fixes: 790869dacc3d ("ALSA: line6: Add support for POD X3") Reported-by: Andrey Konovalov <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-10-09netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'Shmulik Ladkani4-2/+27
Commit 2c16d6033264 ("netfilter: xt_bpf: support ebpf") introduced support for attaching an eBPF object by an fd, with the 'bpf_mt_check_v1' ABI expecting the '.fd' to be specified upon each IPT_SO_SET_REPLACE call. However this breaks subsequent iptables calls: # iptables -A INPUT -m bpf --object-pinned /sys/fs/bpf/xxx -j ACCEPT # iptables -A INPUT -s 5.6.7.8 -j ACCEPT iptables: Invalid argument. Run `dmesg' for more information. That's because iptables works by loading existing rules using IPT_SO_GET_ENTRIES to userspace, then issuing IPT_SO_SET_REPLACE with the replacement set. However, the loaded 'xt_bpf_info_v1' has an arbitrary '.fd' number (from the initial "iptables -m bpf" invocation) - so when 2nd invocation occurs, userspace passes a bogus fd number, which leads to 'bpf_mt_check_v1' to fail. One suggested solution [1] was to hack iptables userspace, to perform a "entries fixup" immediatley after IPT_SO_GET_ENTRIES, by opening a new, process-local fd per every 'xt_bpf_info_v1' entry seen. However, in [2] both Pablo Neira Ayuso and Willem de Bruijn suggested to depricate the xt_bpf_info_v1 ABI dealing with pinned ebpf objects. This fix changes the XT_BPF_MODE_FD_PINNED behavior to ignore the given '.fd' and instead perform an in-kernel lookup for the bpf object given the provided '.path'. It also defines an alias for the XT_BPF_MODE_FD_PINNED mode, named XT_BPF_MODE_PATH_PINNED, to better reflect the fact that the user is expected to provide the path of the pinned object. Existing XT_BPF_MODE_FD_ELF behavior (non-pinned fd mode) is preserved. References: [1] https://marc.info/?l=netfilter-devel&m=150564724607440&w=2 [2] https://marc.info/?l=netfilter-devel&m=150575727129880&w=2 Reported-by: Rafael Buchbinder <[email protected]> Signed-off-by: Shmulik Ladkani <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2017-10-09ALSA: seq: Fix copy_from_user() call inside lockTakashi Iwai2-8/+20
The event handler in the virmidi sequencer code takes a read-lock for the linked list traverse, while it's calling snd_seq_dump_var_event() in the loop. The latter function may expand the user-space data depending on the event type. It eventually invokes copy_from_user(), which might be a potential dead-lock. The sequencer core guarantees that the user-space data is passed only with atomic=0 argument, but snd_virmidi_dev_receive_event() ignores it and always takes read-lock(). For avoiding the problem above, this patch introduces rwsem for non-atomic case, while keeping rwlock for atomic case. Also while we're at it: the superfluous irq flags is dropped in snd_virmidi_input_open(). Reported-by: Jia-Ju Bai <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-10-09ALSA: usb-audio: Add sample rate quirk for Plantronics P610Kai-Heng Feng1-0/+1
Like other Plantronics devices, P610 does not support sample rate reading. Apply sample rate quirk to it. BugLink: https://bugs.launchpad.net/bugs/1719853 Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-10-09netfilter: SYNPROXY: skip non-tcp packet in {ipv4, ipv6}_synproxy_hookLin Zhang2-2/+3
In function {ipv4,ipv6}_synproxy_hook we expect a normal tcp packet, but the real server maybe reply an icmp error packet related to the exist tcp conntrack, so we will access wrong tcp data. Fix it by checking for the protocol field and only process tcp traffic. Signed-off-by: Lin Zhang <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2017-10-08tipc: Unclone message at secondary destination lookupJon Maloy1-0/+8
When a bundling message is received, the function tipc_link_input() calls function tipc_msg_extract() to unbundle all inner messages of the bundling message before adding them to input queue. The function tipc_msg_extract() just clones all inner skb for all inner messagges from the bundling skb. This means that the skb headroom of an inner message overlaps with the data part of the preceding message in the bundle. If the message in question is a name addressed message, it may be subject to a secondary destination lookup, and eventually be sent out on one of the interfaces again. But, since what is perceived as headroom by the device driver in reality is the last bytes of the preceding message in the bundle, the latter will be overwritten by the MAC addresses of the L2 header. If the preceding message has not yet been consumed by the user, it will evenually be delivered with corrupted contents. This commit fixes this by uncloning all messages passing through the function tipc_msg_lookup_dest(), hence ensuring that the headroom is always valid when the message is passed on. Signed-off-by: Tung Nguyen <[email protected]> Signed-off-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-08tipc: correct initialization of skb listJon Maloy1-2/+2
We change the initialization of the skb transmit buffer queues in the functions tipc_bcast_xmit() and tipc_rcast_xmit() to also initialize their spinlocks. This is needed because we may, during error conditions, need to call skb_queue_purge() on those queues further down the stack. Signed-off-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-08Linux 4.14-rc4Linus Torvalds1-1/+1
2017-10-08gso: fix payload length when gso_size is zeroAlexey Kodanev3-3/+3
When gso_size reset to zero for the tail segment in skb_segment(), later in ipv6_gso_segment(), __skb_udp_tunnel_segment() and gre_gso_segment() we will get incorrect results (payload length, pcsum) for that segment. inet_gso_segment() already has a check for gso_size before calculating payload. The issue was found with LTP vxlan & gre tests over ixgbe NIC. Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Alexey Kodanev <[email protected]> Acked-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-08mlxsw: spectrum_router: Avoid expensive lookup during route removalIdo Schimmel1-14/+0
In commit fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers") I increased the scale of supported VRFs by having all of them share the same LPM tree. In order to avoid look-ups for prefix lengths that don't exist, each route removal would trigger an aggregation across all the active virtual routers to see which prefix lengths are in use and which aren't and structure the tree accordingly. With the way the data structures are currently laid out, this is a very expensive operation. When preformed repeatedly - due to the invocation of the abort mechanism - and with enough VRFs, this can result in a hung task. For now, avoid this optimization until it can be properly re-added in net-next. Fixes: fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: David Ahern <[email protected]> Tested-by: David Ahern <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-08pinctrl: cherryview: fix issues caused by dynamic gpio irqs mappingGrygorii Strashko1-1/+13
New GPIO IRQs are allocated and mapped dynamically by default when GPIO IRQ infrastructure is used by cherryview-pinctrl driver. This causes issues on some Intel platforms [1][2] with broken BIOS which hardcodes Linux IRQ numbers in their ACPI tables. On such platforms cherryview-pinctrl driver should allocate and map all GPIO IRQs at probe time. Side effect - "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n" can be seen at boot log. NOTE. It still may fail if boot sequence will changed and some interrupt controller will be probed before cherryview-pinctrl which will shift Linux IRQ numbering (expected with CONFIG_SPARCE_IRQ enabled). [1] https://bugzilla.kernel.org/show_bug.cgi?id=194945 [2] https://lkml.org/lkml/2017/9/28/153 Cc: Andy Shevchenko <[email protected]> Cc: Chris Gorman <[email protected]> Cc: Mika Westerberg <[email protected]> Cc: Heikki Krogerus <[email protected]> Signed-off-by: Grygorii Strashko <[email protected]> Reported-by: Chris Gorman <[email protected]> Reported-by: Mika Westerberg <[email protected]> Tested-by: Chris Gorman <[email protected]> Acked-by: Mika Westerberg <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-10-07bpf: fix liveness markingAlexei Starovoitov1-0/+5
while processing Rx = Ry instruction the verifier does regs[insn->dst_reg] = regs[insn->src_reg] which often clears write mark (when Ry doesn't have it) that was just set by check_reg_arg(Rx) prior to the assignment. That causes mark_reg_read() to keep marking Rx in this block as REG_LIVE_READ (since the logic incorrectly misses that it's screened by the write) and in many of its parents (until lucky write into the same Rx or beginning of the program). That causes is_state_visited() logic to miss many pruning opportunities. Furthermore mark_reg_read() logic propagates the read mark for BPF_REG_FP as well (though it's readonly) which causes harmless but unnecssary work during is_state_visited(). Note that do_propagate_liveness() skips FP correctly, so do the same in mark_reg_read() as well. It saves 0.2 seconds for the test below program before after bpf_lb-DLB_L3.o 2604 2304 bpf_lb-DLB_L4.o 11159 3723 bpf_lb-DUNKNOWN.o 1116 1110 bpf_lxc-DDROP_ALL.o 34566 28004 bpf_lxc-DUNKNOWN.o 53267 39026 bpf_netdev.o 17843 16943 bpf_overlay.o 8672 7929 time ~11 sec ~4 sec Fixes: dc503a8ad984 ("bpf/verifier: track liveness for pruning") Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Edward Cree <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-07doc: Fix typo "8023.ad" in bonding documentationAxel Beckert1-1/+1
Should be "802.3ad" like everywhere else in the document. Signed-off-by: Axel Beckert <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-07ipv6: fix net.ipv6.conf.all.accept_dad behaviour for realMatteo Croce1-2/+2
Commit 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers") was intended to affect accept_dad flag handling in such a way that DAD operation and mode on a given interface would be selected according to the maximum value of conf/{all,interface}/accept_dad. However, addrconf_dad_begin() checks for particular cases in which we need to skip DAD, and this check was modified in the wrong way. Namely, it was modified so that, if the accept_dad flag is 0 for the given interface *or* for all interfaces, DAD would be skipped. We have instead to skip DAD if accept_dad is 0 for the given interface *and* for all interfaces. Fixes: 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers") Acked-by: Stefano Brivio <[email protected]> Signed-off-by: Matteo Croce <[email protected]> Reported-by: Erik Kline <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-07Merge tag 'scsi-fixes' of ↵Linus Torvalds8-31/+36
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: - a couple of serious fixes: use after free and blacklist for WRITE SAME - one error leg fix: write_pending failure - one user experience problem: do not override max_sectors_kb - one minor unused function removal * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvscsis: Fix write_pending failure path scsi: libiscsi: Remove iscsi_destroy_session scsi: libiscsi: Fix use-after-free race during iscsi_session_teardown scsi: sd: Do not override max_sectors_kb sysfs setting scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP
2017-10-07Merge branch 'i2c/for-current-4.14' of ↵Linus Torvalds5-10/+14
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has three driver fixes for the newly introduced drivers and one ID addition for the i801 driver" * 'i2c/for-current-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: make structure stm32f7_setup static const i2c: ensure termination of *_device_id tables i2c: i801: Add support for Intel Cedar Fork i2c: stm32f7: fix setup structure
2017-10-07Merge tag 'mmc-v4.14-rc3' of ↵Linus Torvalds11-162/+81
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix driver strength selection when selecting hs400es - Delete bounce buffer handling: This change fixes a problem related to how bounce buffers are being allocated. However, instead of trying to fix that, let's just remove the mmc bounce buffer code altogether, as it has practically no use. MMC host: - meson-gx: A couple of fixes related to clock/phase/tuning - sdhci-xenon: Fix clock resource by adding an optional bus clock" * tag 'mmc-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock mmc: meson-gx: include tx phase in the tuning process mmc: meson-gx: fix rx phase reset mmc: meson-gx: make sure the clock is rounded down mmc: Delete bounce buffer handling mmc: core: add driver strength selection when selecting hs400es
2017-10-07gpio: omap: Fix lost edge interruptsGrygorii Strashko1-9/+13
Now acking of edge irqs happens the following way: - omap_gpio_irq_handler - "isr" = read irq status - omap_clear_gpio_irqbank(bank, isr_saved & ~level_mask); ^ clear edge status, so irq can be accepted - loop while "isr" generic_handle_irq() - handle_edge_irq() - desc->irq_data.chip->irq_ack(&desc->irq_data); - omap_gpio_ack_irq() it might be that at this moment edge IRQ was triggered again and it will be cleared and IRQ will be lost. Use handle_simple_irq and clear edge interrupts early without disabling them in omap_gpio_irq_handler to avoid loosing interrupts. [1] https://marc.info/?l=linux-omap&m=149004465313534&w=2 Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Ladislav Michl <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2017-10-07crypto: skcipher - Fix crash on zero-length inputHerbert Xu1-6/+11
The skcipher walk interface doesn't handle zero-length input properly as the old blkcipher walk interface did. This is due to the fact that the length check is done too late. This patch moves the length check forward so that it does the right thing. Fixes: b286d8b1a690 ("crypto: skcipher - Add skcipher walk...") Cc: <[email protected]> Reported-by: Stephan Müller <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2017-10-07crypto: shash - Fix a sleep-in-atomic bug in shash_setkey_unalignedJia-Ju Bai1-1/+1
The SCTP program may sleep under a spinlock, and the function call path is: sctp_generate_t3_rtx_event (acquire the spinlock) sctp_do_sm sctp_side_effects sctp_cmd_interpreter sctp_make_init_ack sctp_pack_cookie crypto_shash_setkey shash_setkey_unaligned kmalloc(GFP_KERNEL) For the same reason, the orinoco driver may sleep in interrupt handler, and the function call path is: orinoco_rx_isr_tasklet orinoco_rx orinoco_mic crypto_shash_setkey shash_setkey_unaligned kmalloc(GFP_KERNEL) To fix it, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool and my code review. Signed-off-by: Jia-Ju Bai <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2017-10-07crypto: xts - Fix an error handling path in 'create()'Christophe Jaillet1-2/+4
All error handling paths 'goto err_drop_spawn' except this one. In order to avoid some resources leak, we should do it as well here. Fixes: f1c131b45410 ("crypto: xts - Convert to skcipher") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2017-10-07crypto: stm32 - Try to fix hash paddingArnd Bergmann1-6/+9
gcc warns that the length for the extra unaligned data in the hash function may be used unaligned. In theory this could happen if we pass a zero-length sg_list, or if sg_is_last() was never true: In file included from drivers/crypto/stm32/stm32-hash.c:23: drivers/crypto/stm32/stm32-hash.c: In function 'stm32_hash_one_request': include/uapi/linux/kernel.h:12:49: error: 'ncp' may be used uninitialized in this function [-Werror=maybe-uninitialized] #define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) Neither of these can happen in practice, so the warning is harmless. However while trying to suppress the warning, I noticed multiple problems with that code: - On big-endian kernels, we byte-swap the data like we do for register accesses, however this is a data stream and almost certainly needs to use a single writesl() instead of series of writel() to give the correct hash. - If the length is not a multiple of four bytes, we skip the last word entirely, since we write the truncated length using stm32_hash_set_nblw(). - If we change the code to round the length up rather than down, the last bytes contain stale data, so it needs some form of padding. This tries to address all four problems, by correctly initializing the length to zero, using endian-safe copy functions, adding zero-padding and passing the padded length. I have done no testing on this patch, so please review carefully and if possible test with an unaligned length and big-endian kernel builds. Fixes: 8a1012d3f2ab ("crypto: stm32 - Support for STM32 HASH module") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2017-10-06Merge tag 'hwmon-for-linus-v4.14-rc4' of ↵Linus Torvalds1-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix up error path in xgene driver" * tag 'hwmon-for-linus-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (xgene) Fix up error handling path mixup in 'xgene_hwmon_probe()'
2017-10-06Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds3-5/+23
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: - build fix to export the clk_bulk_prepare() symbol - suspend fix for Samsung Exynos SoCs where we need to keep clks on across suspend - two critical clk markings for clks that shouldn't ever turn off on Rockchip SoCs - a fix for a copy-paste mistake on Rockchip rk3128 causing some clks to touch the same bit and trample over one another * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: samsung: exynos4: Enable VPLL and EPLL clocks for suspend/resume cycle clk: Export clk_bulk_prepare() clk: rockchip: add sclk_timer5 as critical clock on rk3128 clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs error clk: rockchip: add pclk_pmu as critical clock on rk3128
2017-10-06Merge tag 'arc-4.14-rc4' of ↵Linus Torvalds17-28/+130
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC udpates from Vineet Gupta: - updates for various platforms - boot log updates for upcoming HS48 family of cores (dual issue) * tag 'arc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz ARC: fix allnoconfig build warning ARCv2: boot log: identify HS48 cores (dual issue) ARC: boot log: decontaminate ARCv2 ISA_CONFIG register arc: remove redundant UTS_MACHINE define in arch/arc/Makefile ARC: [plat-eznps] Update platform maintainer as Noam left ARC: [plat-hsdk] use actual clk driver to manage cpu clk ARC: [*defconfig] Reenable soft lock-up detector ARC: [plat-axs10x] sdio: Temporary fix of sdio ciu frequency ARC: [plat-hsdk] sdio: Temporary fix of sdio ciu frequency ARC: [plat-axs103] Add temporary quirk to reset ethernet IP
2017-10-06Merge tag 'xfs-4.14-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds2-3/+30
Pull xfs fixes from Darrick Wong: - fix a race between overlapping copy on write aio - fix cow fork swapping when we defragment reflinked files * tag 'xfs-4.14-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: handle racy AIO in xfs_reflink_end_cow xfs: always swap the cow forks when swapping extents
2017-10-06Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds9-22/+45
Pull block fixes from Jens Axboe: "A collection of fixes for this series. This contains: - NVMe pull request from Christoph, one uuid attribute fix, and one fix for the controller memory buffer address for remapped BARs. - use-after-free fix for bsg, from Benjamin Block. - bcache race/use-after-free fix for a list traversal, fixing a regression in this merge window. From Coly Li. - null_blk change configfs dependency change from a 'depends' to a 'select'. This is a change from this merge window as well. From me. - nbd signal fix from Josef, fixing a regression introduced with the status code changes. - nbd MAINTAINERS mailing list entry update. - blk-throttle stall fix from Joseph Qi. - blk-mq-debugfs fix from Omar, fixing an issue where we don't register the IO scheduler debugfs directory, if the driver is loaded with it. Only shows up if you switch through the sysfs interface" * 'for-linus' of git://git.kernel.dk/linux-block: bsg-lib: fix use-after-free under memory-pressure nvme-pci: Use PCI bus address for data/queues in CMB blk-mq-debugfs: fix device sched directory for default scheduler null_blk: change configfs dependency to select blk-throttle: fix possible io stall when upgrade to max MAINTAINERS: update list for NBD nbd: fix -ERESTARTSYS handling nvme: fix visibility of "uuid" ns attribute bcache: use llist_for_each_entry_safe() in __closure_wake_up()
Powered by cgit, Gruvboxed by Blaster4385.