aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-02-21csky: Add flush_icache_mm to defer flush icache allGuo Ren7-11/+77
Some CPUs don't support icache.va instruction to maintain the whole smp cores' icache. Using icache.all + IPI casue a lot on performace and using defer mechanism could reduce the number of calling icache _flush_all functions. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Optimize abiv2 copy_to_user_page with VM_EXECGuo Ren1-1/+3
Only when vma is for VM_EXEC, we need sync dcache & icache. eg: - gdb ptrace modify user space instruction code area. Add VM_EXEC condition to reduce unnecessary cache flush. The abiv1 cpus' cache are all VIPT, so we still need to deal with dcache aliasing problem. But there is optimized way to use cache color, just like what's done in arch/csky/abiv1/inc/abi/page.h. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860)Guo Ren2-8/+18
Instead of flushing cache per update_mmu_cache() called, we use flush_dcache_page to reduce the frequency of flashing the cache. As abiv2 cpus are all PIPT for icache & dcache, we needn't handle dcache aliasing problem. But their icache can't snoop dcache, so we still need sync_icache_dcache in update_mmu_cache(). Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Remove unnecessary flush_icache_* implementationGuo Ren3-37/+2
The abiv2 CPUs are all PIPT cache, so there is no need to implement flush_icache_page function. The function flush_icache_user_range hasn't been used, so just remove it. The function flush_cache_range is not necessary for PIPT cache when tlb mapping changed. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Support icache flush without specific instructionsGuo Ren4-8/+31
Some CPUs don't support icache specific instructions to flush icache lines in broadcast way. We use cpu control registers to flush local icache and use IPI to notify other cores. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky/Kconfig: Add Kconfig.platforms to support some driversGuo Ren2-0/+11
Such as snps,dw-apb-ictl Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky/smp: Fixup boot failed when CONFIG_SMPGuo Ren1-1/+1
If we use a non-ipi-support interrupt controller, it will cause panic here. We should let cpu up and work with CONFIG_SMP, when we use a non-ipi intc. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Set regs->usp to kernel sp, when the exception is from kernelGuo Ren3-7/+31
In the past, we didn't care about kernel sp when saving pt_reg. But in some cases, we still need pt_reg->usp to represent the kernel stack before enter exception. For cmpxhg in atomic.S, we need save and restore usp for above. Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky/mm: Fixup export invalid_pte_table symbolGuo Ren1-0/+1
There is no present bit in csky pmd hardware, so we need to prepare invalid_pte_table for empty pmd entry and the functions (pmd_none & pmd_present) in pgtable.h need invalid_pte_talbe to get result. If a module use these functions, we need export the symbol for it. Signed-off-by: Guo Ren <[email protected]> Cc: Mo Qihui <[email protected]> Cc: Zhange Jian <[email protected]>
2020-02-21csky: Separate fixaddr_init from highmemGuo Ren7-66/+61
After fixaddr_init is separated from highmem, we could use tcm without highmem selected. (610 (abiv1) don't support highmem, but it could use tcm now.) Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Tightly-Coupled Memory or Sram supportGuo Ren7-1/+304
The implementation are not only used by TCM but also used by sram on SOC bus. It follow existed linux tcm software interface, so that old tcm application codes could be re-used directly. Software interface list in asm/tcm.h: - Variables/Const: __tcmdata, __tcmconst - Functions: __tcmfunc, __tcmlocalfunc - Malloc/Free: tcm_alloc, tcm_free In linux menuconfig: - Choose a TCM contain instrctions + data or separated in ITCM/DTCM. - Determine TCM_BASE (DTCM_BASE) in phyiscal address. - Determine size of TCM or ITCM(DTCM) in page counts. Here is hello tcm example from Documentation/arm/tcm.rst which could be directly used: /* Uninitialized data */ static u32 __tcmdata tcmvar; /* Initialized data */ static u32 __tcmdata tcmassigned = 0x2BADBABEU; /* Constant */ static const u32 __tcmconst tcmconst = 0xCAFEBABEU; static void __tcmlocalfunc tcm_to_tcm(void) { int i; for (i = 0; i < 100; i++) tcmvar ++; } static void __tcmfunc hello_tcm(void) { /* Some abstract code that runs in ITCM */ int i; for (i = 0; i < 100; i++) { tcmvar ++; } tcm_to_tcm(); } static void __init test_tcm(void) { u32 *tcmem; int i; hello_tcm(); printk("Hello TCM executed from ITCM RAM\n"); printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar); tcmvar = 0xDEADBEEFU; printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar); printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned); printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst); /* Allocate some TCM memory from the pool */ tcmem = tcm_alloc(20); if (tcmem) { printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem); tcmem[0] = 0xDEADBEEFU; tcmem[1] = 0x2BADBABEU; tcmem[2] = 0xCAFEBABEU; tcmem[3] = 0xDEADBEEFU; tcmem[4] = 0x2BADBABEU; for (i = 0; i < 5; i++) printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]); tcm_free(tcmem, 20); } } TODO: - Separate fixup mapping from highmem - Support abiv1 Signed-off-by: Guo Ren <[email protected]>
2020-02-21csky: Initial stack protector supportMao Han3-0/+36
This is a basic -fstack-protector support without per-task canary switching. The protector will report something like when stack corruption is detected: It's tested with strcpy local array overflow in sys_kill and get: stack-protector: Kernel stack is corrupted in: sys_kill+0x23c/0x23c TODO: - Support task switch for different cannary Signed-off-by: Mao Han <[email protected]> Signed-off-by: Guo Ren <[email protected]>
2020-02-21MAINTAINERS: csky: Add mailing list for cskyGuo Ren1-0/+1
Add mailing list and it's convenient for maintain C-SKY subsystem. Signed-off-by: Guo Ren <[email protected]>
2020-02-21ext4: fix potential race between s_group_info online resizing and accessSuraj Jitindar Singh2-21/+39
During an online resize an array of pointers to s_group_info gets replaced so it can get enlarged. If there is a concurrent access to the array in ext4_get_group_info() and this memory has been reused then this can lead to an invalid memory access. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Suraj Jitindar Singh <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Reviewed-by: Balbir Singh <[email protected]> Cc: [email protected]
2020-02-21ext4: fix potential race between online resizing and write operationsTheodore Ts'o4-25/+97
During an online resize an array of pointers to buffer heads gets replaced so it can get enlarged. If there is a racing block allocation or deallocation which uses the old array, and the old array has gotten reused this can lead to a GPF or some other random kernel memory getting modified. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/[email protected] Reported-by: Suraj Jitindar Singh <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]
2020-02-21Merge tag 'drm-intel-fixes-2020-02-20' of ↵Dave Airlie19-108/+168
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc3: - Workaround missing Display Stream Compression (DSC) state readout by forcing modeset when its enabled at probe - Fix EHL port clock voltage level requirements - Fix queuing retire workers on the virtual engine - Fix use of partially initialized waiters - Stop using drm_pci_alloc/drm_pci/free - Fix rewind of RING_TAIL by forcing a context reload - Fix locking on resetting ring->head - Propagate our bug filing URL change to stable kernels Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-21Merge tag 'drm-misc-fixes-2020-02-20' of ↵Dave Airlie10-22/+45
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.6-rc3: - Fix dt binding for sunxi. - Allow only 1 rotation argument, and allow 0 rotation in video cmdline. - Small compiler warning fix for panfrost. - Fix when using performance counters in panfrost when using per fd address space. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-02-20Merge branch 'bnxt_en-shutdown-and-kexec-kdump-related-fixes'David S. Miller1-2/+10
Michael Chan says: ==================== bnxt_en: shutdown and kexec/kdump related fixes. 2 small patches to fix kexec shutdown and kdump kernel driver init issues. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-02-20bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.Vasundhara Volam1-0/+8
If crashed kernel does not shutdown the NIC properly, PCIe FLR is required in the kdump kernel in order to initialize all the functions properly. Fixes: d629522e1d66 ("bnxt_en: Reduce memory usage when running in kdump kernel.") Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20bnxt_en: Improve device shutdown method.Vasundhara Volam1-2/+2
Especially when bnxt_shutdown() is called during kexec, we need to disable MSIX and disable Bus Master to completely quiesce the device. Make these 2 calls unconditionally in the shutdown method. Fixes: c20dc142dd7b ("bnxt_en: Disable bus master during PCI shutdown and driver unload.") Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20net: netlink: cap max groups which will be considered in netlink_bind()Nikolay Aleksandrov1-2/+3
Since nl_groups is a u32 we can't bind more groups via ->bind (netlink_bind) call, but netlink has supported more groups via setsockopt() for a long time and thus nlk->ngroups could be over 32. Recently I added support for per-vlan notifications and increased the groups to 33 for NETLINK_ROUTE which exposed an old bug in the netlink_bind() code causing out-of-bounds access on archs where unsigned long is 32 bits via test_bit() on a local variable. Fix this by capping the maximum groups in netlink_bind() to BITS_PER_TYPE(u32), effectively capping them at 32 which is the minimum of allocated groups and the maximum groups which can be bound via netlink_bind(). CC: Christophe Leroy <[email protected]> CC: Richard Guy Briggs <[email protected]> Fixes: 4f520900522f ("netlink: have netlink per-protocol bind function return an error code.") Reported-by: Erhard F. <[email protected]> Signed-off-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20net: thunderx: workaround BGX TX Underflow issueTim Harvey2-3/+68
While it is not yet understood why a TX underflow can easily occur for SGMII interfaces resulting in a TX wedge. It has been found that disabling/re-enabling the LMAC resolves the issue. Signed-off-by: Tim Harvey <[email protected]> Reviewed-by: Robert Jones <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20ionic: fix fw_status readShannon Nelson2-4/+8
The fw_status field is only 8 bits, so fix the read. Also, we only want to look at the one status bit, to allow for future use of the other bits, and watch for a bad PCI read. Fixes: 97ca486592c0 ("ionic: add heartbeat check") Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20Merge branch 'next-integrity' of ↵Linus Torvalds4-19/+34
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull IMA fixes from Mimi Zohar: "Two bug fixes and an associated change for each. The one that adds SM3 to the IMA list of supported hash algorithms is a simple change, but could be considered a new feature" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: add sm3 algorithm to hash algorithm configuration list crypto: rename sm3-256 to sm3 in hash_algo_name efi: Only print errors about failing to get certs if EFI vars are found x86/ima: use correct identifier for SetupMode variable
2020-02-20net: disable BRIDGE_NETFILTER by defaultRoman Kiryanov1-1/+0
The description says 'If unsure, say N.' but the module is built as M by default (once the dependencies are satisfied). When the module is selected (Y or M), it enables NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS which alter kernel internal structures. We (Android Studio Emulator) currently do not use this module and think this it is more consistent to have it disabled by default as opposite to disabling it explicitly to prevent enabling NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS. Signed-off-by: Roman Kiryanov <[email protected]> Acked-by: Florian Westphal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20net: macb: Properly handle phylink on at91rm9200Alexandre Belloni2-28/+33
at91ether_init was handling the phy mode and speed but since the switch to phylink, the NCFGR register got overwritten by macb_mac_config(). The issue is that the RM9200_RMII bit and the MACB_CLK_DIV32 field are cleared but never restored as they conflict with the PAE, GBE and PCSSEL bits. Add new capability to differentiate between EMAC and the other versions of the IP and use it to set and avoid clearing the relevant bits. Also, this fixes a NULL pointer dereference in macb_mac_link_up as the EMAC doesn't use any rings/bufffers/queues. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Alexandre Belloni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20bootconfig: Print array as multiple commands for legacy command lineMasami Hiramatsu1-14/+8
Print arraied values as multiple same options for legacy kernel command line. With this rule, if the "kernel.*" and "init.*" array entries in bootconfig are printed out as multiple same options, e.g. kernel { console = "ttyS0,115200" console += "tty0" } will be correctly converted to console="ttyS0,115200" console="tty0" in the kernel command line. Link: http://lkml.kernel.org/r/158220118213.26565.8163300497009463916.stgit@devnote2 Reported-by: Borislav Petkov <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20bootconfig: Reject subkey and value on same parent keyMasami Hiramatsu4-4/+25
Reject if a value node is mixed with subkey node on same parent key node. A value node can not co-exist with subkey node under some key node, e.g. key = value key.subkey = another-value This is not be allowed because bootconfig API is not designed to handle such case. Link: http://lkml.kernel.org/r/158220115232.26565.7792340045009731803.stgit@devnote2 Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20tools/bootconfig: Remove unneeded error message silencerMasami Hiramatsu2-12/+1
Remove error message silent knob, we don't need it anymore because we can check if there is a bootconfig by checking the magic word. If there is a magic word, but failed to load a bootconfig from initrd, there is a real problem. Link: http://lkml.kernel.org/r/158220113256.26565.14264598654427773104.stgit@devnote2 Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20bootconfig: Add bootconfig magic word for indicating bootconfig explicitlyMasami Hiramatsu6-17/+49
Add bootconfig magic word to the end of bootconfig on initrd image for indicating explicitly the bootconfig is there. Also tools/bootconfig treats wrong size or wrong checksum or parse error as an error, because if there is a bootconfig magic word, there must be a bootconfig. The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word. Thus the block image of the initrd file with bootconfig is as follows. [Initrd][bootconfig][size][csum][#BOOTCONFIG\n] Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2 Suggested-by: Steven Rostedt <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20bootconfig: Set CONFIG_BOOT_CONFIG=n by defaultMasami Hiramatsu3-2/+10
Set CONFIG_BOOT_CONFIG=n by default. This also warns user if CONFIG_BOOT_CONFIG=n but "bootconfig" is given in the kernel command line. Link: http://lkml.kernel.org/r/158220111291.26565.9036889083940367969.stgit@devnote2 Suggested-by: Steven Rostedt <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20tracing: Clear trace_state when starting traceMasami Hiramatsu1-2/+2
Clear trace_state data structure when starting trace in __synth_event_trace_start() internal function. Currently trace_state is initialized only in the synth_event_trace_start() API, but the trace_state in synth_event_trace() and synth_event_trace_array() are on the stack without initialization. This means those APIs will see wrong parameters and wil skip closing process in __synth_event_trace_end() because trace_state->disabled may be !0. Link: http://lkml.kernel.org/r/158193315899.8868.1781259176894639952.stgit@devnote2 Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20bootconfig: Mark boot_config_checksum() staticQiujun Huang1-1/+1
In fact, this function is only used in this file, so mark it with 'static'. Link: http://lkml.kernel.org/r/[email protected] Acked-by: Masami Hiramatsu <[email protected]> Signed-off-by: Qiujun Huang <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20tracing: Disable trace_printk() on post poned testsSteven Rostedt (VMware)1-0/+2
The tracing seftests checks various aspects of the tracing infrastructure, and one is filtering. If trace_printk() is active during a self test, it can cause the filtering to fail, which will disable that part of the trace. To keep the selftests from failing because of trace_printk() calls, trace_printk() checks the variable tracing_selftest_running, and if set, it does not write to the tracing buffer. As some tracers were registered earlier in boot, the selftest they triggered would fail because not all the infrastructure was set up for the full selftest. Thus, some of the tests were post poned to when their infrastructure was ready (namely file system code). The postpone code did not set the tracing_seftest_running variable, and could fail if a trace_printk() was added and executed during their run. Cc: [email protected] Fixes: 9afecfbb95198 ("tracing: Postpone tracer start-up tests till the system is more robust") Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20tracing: Have synthetic event test use raw_smp_processor_id()Steven Rostedt (VMware)1-6/+6
The test code that tests synthetic event creation pushes in as one of its test fields the current CPU using "smp_processor_id()". As this is just something to see if the value is correctly passed in, and the actual CPU used does not matter, use raw_smp_processor_id(), otherwise with debug preemption enabled, a warning happens as the smp_processor_id() is called without preemption enabled. Link: http://lkml.kernel.org/r/[email protected] Reviewed-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20xen: Enable interrupts when calling _cond_resched()Thomas Gleixner1-1/+3
xen_maybe_preempt_hcall() is called from the exception entry point xen_do_hypervisor_callback with interrupts disabled. _cond_resched() evades the might_sleep() check in cond_resched() which would have caught that and schedule_debug() unfortunately lacks a check for irqs_disabled(). Enable interrupts around the call and use cond_resched() to catch future issues. Fixes: fdfd811ddde3 ("x86/xen: allow privcmd hypercalls to be preempted") Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Boris Ostrovsky <[email protected]>
2020-02-20tracing: Fix number printing bug in print_synth_event()Tom Zanussi1-3/+29
Fix a varargs-related bug in print_synth_event() which resulted in strange output and oopses on 32-bit x86 systems. The problem is that trace_seq_printf() expects the varargs to match the format string, but print_synth_event() was always passing u64 values regardless. This results in unspecified behavior when unpacking with va_arg() in trace_seq_printf(). Add a function that takes the size into account when calling trace_seq_printf(). Before: modprobe-1731 [003] .... 919.039758: gen_synth_test: next_pid_field=777(null)next_comm_field=hula hoops ts_ns=1000000 ts_ms=1000 cpu=3(null)my_string_field=thneed my_int_field=598(null) After: insmod-1136 [001] .... 36.634590: gen_synth_test: next_pid_field=777 next_comm_field=hula hoops ts_ns=1000000 ts_ms=1000 cpu=1 my_string_field=thneed my_int_field=598 Link: http://lkml.kernel.org/r/a9b59eb515dbbd7d4abe53b347dccf7a8e285657.1581720155.git.zanussi@kernel.org Reported-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20tracing: Check that number of vals matches number of synth event fieldsTom Zanussi1-2/+12
Commit 7276531d4036('tracing: Consolidate trace() functions') inadvertently dropped the synth_event_trace() and synth_event_trace_array() checks that verify the number of values passed in matches the number of fields in the synthetic event being traced, so add them back. Link: http://lkml.kernel.org/r/32819cac708714693669e0dfe10fe9d935e94a16.1581720155.git.zanussi@kernel.org Signed-off-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20tracing: Make synth_event trace functions endian-correctTom Zanussi1-4/+58
synth_event_trace(), synth_event_trace_array() and __synth_event_add_val() write directly into the trace buffer and need to take endianness into account, like trace_event_raw_event_synth() does. Link: http://lkml.kernel.org/r/2011354355e405af9c9d28abba430d1f5ff7771a.1581720155.git.zanussi@kernel.org Signed-off-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20tracing: Make sure synth_event_trace() example always uses u64Tom Zanussi1-17/+17
synth_event_trace() is the varargs version of synth_event_trace_array(), which takes an array of u64, as do synth_event_add_val() et al. To not only be consistent with those, but also to address the fact that synth_event_trace() expects every arg to be of the same type since it doesn't also pass in e.g. a format string, the caller needs to make sure all args are of the same type, u64. u64 is used because it needs to accomodate the largest type available in synthetic events, which is u64. This fixes the bug reported by the kernel test robot/Rong Chen. Link: https://lore.kernel.org/lkml/20200212113444.GS12867@shao2-debian/ Link: http://lkml.kernel.org/r/894c4e955558b521210ee0642ba194a9e603354c.1581720155.git.zanussi@kernel.org Fixes: 9fe41efaca084 ("tracing: Add synth event generation test module") Reported-by: kernel test robot <[email protected]> Signed-off-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-02-20Merge branch 's390-fixes'David S. Miller2-18/+14
Julian Wiedmann says: ==================== s390/qeth: fixes 2020-02-20 please apply the following patch series for qeth to netdev's net tree. This corrects three minor issues: 1) return a more fitting errno when VNICC cmds are not supported, 2) remove a bogus WARN in the NAPI code, and 3) be _very_ pedantic about the RX copybreak. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-02-20s390/qeth: fix off-by-one in RX copybreak checkJulian Wiedmann1-1/+1
The RX copybreak is intended as the _max_ value where the frame's data should be copied. So for frame_len == copybreak, don't build an SG skb. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20s390/qeth: don't warn for napi with 0 budgetJulian Wiedmann1-1/+0
Calling napi->poll() with 0 budget is a legitimate use by netpoll. Fixes: a1c3ed4c9ca0 ("qeth: NAPI support for l2 and l3 discipline") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20s390/qeth: vnicc Fix EOPNOTSUPP precedenceAlexandra Winter1-16/+13
When getting or setting VNICC parameters, the error code EOPNOTSUPP should have precedence over EBUSY. EBUSY is used because vnicc feature and bridgeport feature are mutually exclusive, which is a temporary condition. Whereas EOPNOTSUPP indicates that the HW does not support all or parts of the vnicc feature. This issue causes the vnicc sysfs params to show 'blocked by bridgeport' for HW that does not support VNICC at all. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <[email protected]> Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20openvswitch: Distribute switch variables for initializationKees Cook1-8/+10
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. net/openvswitch/flow_netlink.c: In function ‘validate_set’: net/openvswitch/flow_netlink.c:2711:29: warning: statement will never be executed [-Wswitch-unreachable] 2711 | const struct ovs_key_ipv4 *ipv4_key; | ^~~~~~~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20net: ip6_gre: Distribute switch variables for initializationKees Cook2-7/+14
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. net/ipv6/ip6_gre.c: In function ‘ip6gre_err’: net/ipv6/ip6_gre.c:440:32: warning: statement will never be executed [-Wswitch-unreachable] 440 | struct ipv6_tlv_tnl_enc_lim *tel; | ^~~ net/ipv6/ip6_tunnel.c: In function ‘ip6_tnl_err’: net/ipv6/ip6_tunnel.c:520:32: warning: statement will never be executed [-Wswitch-unreachable] 520 | struct ipv6_tlv_tnl_enc_lim *tel; | ^~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20net: core: Distribute switch variables for initializationKees Cook1-2/+2
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. net/core/skbuff.c: In function ‘skb_checksum_setup_ip’: net/core/skbuff.c:4809:7: warning: statement will never be executed [-Wswitch-unreachable] 4809 | int err; | ^~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-20kvm/emulate: fix a -Werror=cast-function-typeQian Cai2-23/+26
arch/x86/kvm/emulate.c: In function 'x86_emulate_insn': arch/x86/kvm/emulate.c:5686:22: error: cast between incompatible function types from 'int (*)(struct x86_emulate_ctxt *)' to 'void (*)(struct fastop *)' [-Werror=cast-function-type] rc = fastop(ctxt, (fastop_t)ctxt->execute); Fix it by using an unnamed union of a (*execute) function pointer and a (*fastop) function pointer. Fixes: 3009afc6e39e ("KVM: x86: Use a typedef for fastop functions") Suggested-by: Paolo Bonzini <[email protected]> Signed-off-by: Qian Cai <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-20KVM: x86: fix incorrect comparison in trace eventPaolo Bonzini1-1/+1
The "u" field in the event has three states, -1/0/1. Using u8 however means that comparison with -1 will always fail, so change to signed char. Signed-off-by: Paolo Bonzini <[email protected]>
2020-02-20x86/xen: Distribute switch variables for initializationKees Cook1-3/+4
Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. arch/x86/xen/enlighten_pv.c: In function ‘xen_write_msr_safe’: arch/x86/xen/enlighten_pv.c:904:12: warning: statement will never be executed [-Wswitch-unreachable] 904 | unsigned which; | ^~~~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916 Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Juergen Gross <[email protected]> [boris: made @which an 'unsigned int'] Signed-off-by: Boris Ostrovsky <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.