aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-10-18Merge tag 'usb-serial-6.12-rc4' of ↵Greg Kroah-Hartman1-0/+8
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial device ids for 6.12-rc4 Here are some new modem device ids. Everything has been in linux-next over night with no reported issues. * tag 'usb-serial-6.12-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN920C04 MBIM compositions USB: serial: option: add support for Quectel EG916Q-GL
2024-10-17USB: serial: option: add Telit FN920C04 MBIM compositionsDaniele Palmas1-0/+6
Add the following Telit FN920C04 compositions: 0x10a2: MBIM + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a2 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a7: MBIM + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a7 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10aa: MBIM + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10aa Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-10-17USB: serial: option: add support for Quectel EG916Q-GLBenjamin B. Frost1-0/+2
Add Quectel EM916Q-GL with product ID 0x6007 T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6007 Rev= 2.00 S: Manufacturer=Quectel S: Product=EG916Q-GL C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=200mA A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=88(I) Atr=03(Int.) MxPS= 32 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms MI_00 Quectel USB Diag Port MI_01 Quectel USB NMEA Port MI_02 Quectel USB AT Port MI_03 Quectel USB Modem Port MI_04 Quectel USB Net Port Signed-off-by: Benjamin B. Frost <benjamin@geanix.com> Reviewed-by: Lars Melin <larsm17@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2024-10-17xhci: dbc: honor usb transfer size boundaries.Mathias Nyman2-5/+51
Treat each completed full size write to /dev/ttyDBC0 as a separate usb transfer. Make sure the size of the TRBs matches the size of the tty write by first queuing as many max packet size TRBs as possible up to the last TRB which will be cut short to match the size of the tty write. This solves an issue where userspace writes several transfers back to back via /dev/ttyDBC0 into a kfifo before dbgtty can find available request to turn that kfifo data into TRBs on the transfer ring. The boundary between transfer was lost as xhci-dbgtty then turned everyting in the kfifo into as many 'max packet size' TRBs as possible. DbC would then send more data to the host than intended for that transfer, causing host to issue a babble error. Refuse to write more data to kfifo until previous tty write data is turned into properly sized TRBs with data size boundaries matching tty write size Tested-by: Uday M Bhat <uday.m.bhat@intel.com> Tested-by: Łukasz Bartosik <ukaszb@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20241016140000.783905-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17usb: xhci: Fix handling errors mid TD followed by other errorsMichal Pecio1-37/+29
Some host controllers fail to produce the final completion event on an isochronous TD which experienced an error mid TD. We deal with it by flagging such TDs and checking if the next event points at the flagged TD or at the next one, and giving back the flagged TD if the latter. This is not enough, because the next TD may be missed by the xHC. Or there may be no next TD but a ring underrun. We also need to get such TD quickly out of the way, or errors on later TDs may be handled wrong. If the next TD experiences a Missed Service Error, we will set the skip flag on the endpoint and then attempt skipping TDs when yet another event arrives. In such scenario, we ought to report the 'error mid TD' transfer as such rather than skip it. Another problem case are Stopped events. If we see one after an error mid TD, we naively assume that it's a Force Stopped Event because it doesn't match the pending TD, but in reality it might be an ordinary Stopped event for the next TD, which we fail to recognize and handle. Fix this by moving error mid TD handling before the whole TD skipping loop. Remove unnecessary conditions, always give back the TD if the new event points to any TRB outside it or if the pointer is NULL, as may be the case in Ring Underrun and Overrun events on 1st gen hardware. Only if the pending TD isn't flagged, consider other actions like skipping. As a side effect of reordering with skip and FSE cases, error mid TD is reordered with last_td_was_short check. This is harmless, because the two cases are mutually exclusive - only one can happen in any given run of handle_tx_event(). Tested on the NEC host and a USB camera with flaky cable. Dynamic debug confirmed that Transaction Errors are sometimes seen, sometimes mid-TD, sometimes followed by Missed Service. In such cases, they were finished properly before skipping began. [Rebase on 6.12-rc1 -Mathias] Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20241016140000.783905-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17xhci: Mitigate failed set dequeue pointer commandsMathias Nyman1-1/+1
Avoid xHC host from processing a cancelled URB by always turning cancelled URB TDs into no-op TRBs before queuing a 'Set TR Deq' command. If the command fails then xHC will start processing the cancelled TD instead of skipping it once endpoint is restarted, causing issues like Babble error. This is not a complete solution as a failed 'Set TR Deq' command does not guarantee xHC TRB caches are cleared. Fixes: 4db356924a50 ("xhci: turn cancelled td cleanup to its own function") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20241016140000.783905-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17xhci: Fix incorrect stream context type macroMathias Nyman1-1/+1
The stream contex type (SCT) bitfield is used both in the stream context data structure, and in the 'Set TR Dequeue pointer' command TRB. In both cases it uses bits 3:1 The SCT_FOR_TRB(p) macro used to set the stream context type (SCT) field for the 'Set TR Dequeue pointer' command TRB incorrectly shifts the value 1 bit left before masking the three bits. Fix this by first masking and rshifting, just like the similar SCT_FOR_CTX(p) macro does This issue has not been visibile as the lost bit 3 is only used with secondary stream arrays (SSA). Xhci driver currently only supports using a primary stream array with Linear stream addressing. Fixes: 95241dbdf828 ("xhci: Set SCT field for Set TR dequeue on streams") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20241016140000.783905-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-17USB: gadget: dummy-hcd: Fix "task hung" problemAlan Stern1-5/+15
The syzbot fuzzer has been encountering "task hung" problems ever since the dummy-hcd driver was changed to use hrtimers instead of regular timers. It turns out that the problems are caused by a subtle difference between the timer_pending() and hrtimer_active() APIs. The changeover blindly replaced the first by the second. However, timer_pending() returns True when the timer is queued but not when its callback is running, whereas hrtimer_active() returns True when the hrtimer is queued _or_ its callback is running. This difference occasionally caused dummy_urb_enqueue() to think that the callback routine had not yet started when in fact it was almost finished. As a result the hrtimer was not restarted, which made it impossible for the driver to dequeue later the URB that was just enqueued. This caused usb_kill_urb() to hang, and things got worse from there. Since hrtimers have no API for telling when they are queued and the callback isn't running, the driver must keep track of this for itself. That's what this patch does, adding a new "timer_pending" flag and setting or clearing it at the appropriate times. Reported-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/6709234e.050a0220.3e960.0011.GAE@google.com/ Tested-by: syzbot+f342ea16c9d06d80b585@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Fixes: a7f3813e589f ("usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler") Cc: Marcello Sylvester Bauer <sylv@sylv.io> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/2dab644e-ef87-4de8-ac9a-26f100b2c609@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-16usb: gadget: f_uac2: fix return value for UAC2_ATTRIBUTE_STRING storeKevin Groeneveld1-3/+3
The configfs store callback should return the number of bytes consumed not the total number of bytes we actually stored. These could differ if for example the passed in string had a newline we did not store. If the returned value does not match the number of bytes written the writer might assume a failure or keep trying to write the remaining bytes. For example the following command will hang trying to write the final newline over and over again (tested on bash 2.05b): echo foo > function_name Fixes: 993a44fa85c1 ("usb: gadget: f_uac2: allow changing interface name via configfs") Cc: stable <stable@kernel.org> Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com> Link: https://lore.kernel.org/r/20241006232637.4267-1-kgroeneveld@lenbrook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-16usb: dwc3: core: Fix system suspend on TI AM62 platformsRoger Quadros2-0/+22
Since commit 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init"), system suspend is broken on AM62 TI platforms. Before that commit, both DWC3_GUSB3PIPECTL_SUSPHY and DWC3_GUSB2PHYCFG_SUSPHY bits (hence forth called 2 SUSPHY bits) were being set during core initialization and even during core re-initialization after a system suspend/resume. These bits are required to be set for system suspend/resume to work correctly on AM62 platforms. Since that commit, the 2 SUSPHY bits are not set for DEVICE/OTG mode if gadget driver is not loaded and started. For Host mode, the 2 SUSPHY bits are set before the first system suspend but get cleared at system resume during core re-init and are never set again. This patch resovles these two issues by ensuring the 2 SUSPHY bits are set before system suspend and restored to the original state during system resume. Cc: stable@vger.kernel.org # v6.9+ Fixes: 6d735722063a ("usb: dwc3: core: Prevent phy suspend during init") Link: https://lore.kernel.org/all/1519dbe7-73b6-4afc-bfe3-23f4f75d772f@kernel.org/ Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Tested-by: Markus Schneider-Pargmann <msp@baylibre.com> Reviewed-by: Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20241011-am62-lpm-usb-v3-1-562d445625b5@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-16xhci: tegra: fix checked USB2 port numberHenry Lin1-1/+1
If USB virtualizatoin is enabled, USB2 ports are shared between all Virtual Functions. The USB2 port number owned by an USB2 root hub in a Virtual Function may be less than total USB2 phy number supported by the Tegra XUSB controller. Using total USB2 phy number as port number to check all PORTSC values would cause invalid memory access. [ 116.923438] Unable to handle kernel paging request at virtual address 006c622f7665642f ... [ 117.213640] Call trace: [ 117.216783] tegra_xusb_enter_elpg+0x23c/0x658 [ 117.222021] tegra_xusb_runtime_suspend+0x40/0x68 [ 117.227260] pm_generic_runtime_suspend+0x30/0x50 [ 117.232847] __rpm_callback+0x84/0x3c0 [ 117.237038] rpm_suspend+0x2dc/0x740 [ 117.241229] pm_runtime_work+0xa0/0xb8 [ 117.245769] process_scheduled_works+0x24c/0x478 [ 117.251007] worker_thread+0x23c/0x328 [ 117.255547] kthread+0x104/0x1b0 [ 117.259389] ret_from_fork+0x10/0x20 [ 117.263582] Code: 54000222 f9461ae8 f8747908 b4ffff48 (f9400100) Cc: stable@vger.kernel.org # v6.3+ Fixes: a30951d31b25 ("xhci: tegra: USB2 pad power controls") Signed-off-by: Henry Lin <henryl@nvidia.com> Link: https://lore.kernel.org/r/20241014042134.27664-1-henryl@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-16usb: dwc3: Wait for EndXfer completion before restoring GUSB2PHYCFGPrashanth K1-4/+6
DWC3 programming guide mentions that when operating in USB2.0 speeds, if GUSB2PHYCFG[6] or GUSB2PHYCFG[8] is set, it must be cleared prior to issuing commands and may be set again after the command completes. But currently while issuing EndXfer command without CmdIOC set, we wait for 1ms after GUSB2PHYCFG is restored. This results in cases where EndXfer command doesn't get completed and causes SMMU faults since requests are unmapped afterwards. Hence restore GUSB2PHYCFG after waiting for EndXfer command completion. Cc: stable@vger.kernel.org Fixes: 1d26ba0944d3 ("usb: dwc3: Wait unconditionally after issuing EndXfer command") Signed-off-by: Prashanth K <quic_prashk@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20240924093208.2524531-1-quic_prashk@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-16usb: typec: qcom-pmic-typec: fix sink status being overwritten with RP_DEFJonathan Marek1-1/+0
This line is overwriting the result of the above switch-case. This fixes the tcpm driver getting stuck in a "Sink TX No Go" loop. Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver") Cc: stable <stable@kernel.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241005144146.2345-1-jonathan@marek.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-16usb: typec: altmode should keep reference to parentThadeu Lima de Souza Cascardo1-0/+3
The altmode device release refers to its parent device, but without keeping a reference to it. When registering the altmode, get a reference to the parent and put it in the release function. Before this fix, when using CONFIG_DEBUG_KOBJECT_RELEASE, we see issues like this: [ 43.572860] kobject: 'port0.0' (ffff8880057ba008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.573532] kobject: 'port0.1' (ffff8880057bd008): kobject_release, parent 0000000000000000 (delayed 1000) [ 43.574407] kobject: 'port0' (ffff8880057b9008): kobject_release, parent 0000000000000000 (delayed 3000) [ 43.575059] kobject: 'port1.0' (ffff8880057ca008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.575908] kobject: 'port1.1' (ffff8880057c9008): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.576908] kobject: 'typec' (ffff8880062dbc00): kobject_release, parent 0000000000000000 (delayed 4000) [ 43.577769] kobject: 'port1' (ffff8880057bf008): kobject_release, parent 0000000000000000 (delayed 3000) [ 46.612867] ================================================================== [ 46.613402] BUG: KASAN: slab-use-after-free in typec_altmode_release+0x38/0x129 [ 46.614003] Read of size 8 at addr ffff8880057b9118 by task kworker/2:1/48 [ 46.614538] [ 46.614668] CPU: 2 UID: 0 PID: 48 Comm: kworker/2:1 Not tainted 6.12.0-rc1-00138-gedbae730ad31 #535 [ 46.615391] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 46.616042] Workqueue: events kobject_delayed_cleanup [ 46.616446] Call Trace: [ 46.616648] <TASK> [ 46.616820] dump_stack_lvl+0x5b/0x7c [ 46.617112] ? typec_altmode_release+0x38/0x129 [ 46.617470] print_report+0x14c/0x49e [ 46.617769] ? rcu_read_unlock_sched+0x56/0x69 [ 46.618117] ? __virt_addr_valid+0x19a/0x1ab [ 46.618456] ? kmem_cache_debug_flags+0xc/0x1d [ 46.618807] ? typec_altmode_release+0x38/0x129 [ 46.619161] kasan_report+0x8d/0xb4 [ 46.619447] ? typec_altmode_release+0x38/0x129 [ 46.619809] ? process_scheduled_works+0x3cb/0x85f [ 46.620185] typec_altmode_release+0x38/0x129 [ 46.620537] ? process_scheduled_works+0x3cb/0x85f [ 46.620907] device_release+0xaf/0xf2 [ 46.621206] kobject_delayed_cleanup+0x13b/0x17a [ 46.621584] process_scheduled_works+0x4f6/0x85f [ 46.621955] ? __pfx_process_scheduled_works+0x10/0x10 [ 46.622353] ? hlock_class+0x31/0x9a [ 46.622647] ? lock_acquired+0x361/0x3c3 [ 46.622956] ? move_linked_works+0x46/0x7d [ 46.623277] worker_thread+0x1ce/0x291 [ 46.623582] ? __kthread_parkme+0xc8/0xdf [ 46.623900] ? __pfx_worker_thread+0x10/0x10 [ 46.624236] kthread+0x17e/0x190 [ 46.624501] ? kthread+0xfb/0x190 [ 46.624756] ? __pfx_kthread+0x10/0x10 [ 46.625015] ret_from_fork+0x20/0x40 [ 46.625268] ? __pfx_kthread+0x10/0x10 [ 46.625532] ret_from_fork_asm+0x1a/0x30 [ 46.625805] </TASK> [ 46.625953] [ 46.626056] Allocated by task 678: [ 46.626287] kasan_save_stack+0x24/0x44 [ 46.626555] kasan_save_track+0x14/0x2d [ 46.626811] __kasan_kmalloc+0x3f/0x4d [ 46.627049] __kmalloc_noprof+0x1bf/0x1f0 [ 46.627362] typec_register_port+0x23/0x491 [ 46.627698] cros_typec_probe+0x634/0xbb6 [ 46.628026] platform_probe+0x47/0x8c [ 46.628311] really_probe+0x20a/0x47d [ 46.628605] device_driver_attach+0x39/0x72 [ 46.628940] bind_store+0x87/0xd7 [ 46.629213] kernfs_fop_write_iter+0x1aa/0x218 [ 46.629574] vfs_write+0x1d6/0x29b [ 46.629856] ksys_write+0xcd/0x13b [ 46.630128] do_syscall_64+0xd4/0x139 [ 46.630420] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 46.630820] [ 46.630946] Freed by task 48: [ 46.631182] kasan_save_stack+0x24/0x44 [ 46.631493] kasan_save_track+0x14/0x2d [ 46.631799] kasan_save_free_info+0x3f/0x4d [ 46.632144] __kasan_slab_free+0x37/0x45 [ 46.632474] kfree+0x1d4/0x252 [ 46.632725] device_release+0xaf/0xf2 [ 46.633017] kobject_delayed_cleanup+0x13b/0x17a [ 46.633388] process_scheduled_works+0x4f6/0x85f [ 46.633764] worker_thread+0x1ce/0x291 [ 46.634065] kthread+0x17e/0x190 [ 46.634324] ret_from_fork+0x20/0x40 [ 46.634621] ret_from_fork_asm+0x1a/0x30 Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20241004123738.2964524-1-cascardo@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-16MAINTAINERS: usb: raw-gadget: add bug tracker linkAndrey Konovalov1-0/+1
Add a link to the GitHub repository where Raw Gadget issues are managed. Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Link: https://lore.kernel.org/r/20241012225853.118217-1-andrey.konovalov@linux.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-16MAINTAINERS: Add an entry for the LJCA driversSakari Ailus1-0/+10
Add a MAINTAINERS entry for the Intel La Jolla Cove Adapter (LJCA) set of drivers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20241011070414.3124-1-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-13Linux 6.12-rc3Linus Torvalds1-1/+1
2024-10-13Merge tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds4-7/+178
Pull smb client fixes from Steve French: "Two fixes for Windows symlink handling" * tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix creating native symlinks pointing to current or parent directory cifs: Improve creating native symlinks pointing to directory
2024-10-13Merge tag 'usb-6.12-rc3' of ↵Linus Torvalds10-37/+66
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for some reported problems for 6.12-rc3. Include in here is: - fix for yurex driver that was caused in -rc1 - build error fix for usbg network filesystem code - onboard_usb_dev build fix - dwc3 driver fixes for reported errors - gadget driver fix - new USB storage driver quirk - xhci resume bugfix All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: net/9p/usbg: Fix build error USB: yurex: kill needless initialization in yurex_read Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant" usb: xhci: Fix problem with xhci resume from suspend usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support usb: dwc3: core: Stop processing of pending events if controller is halted usb: dwc3: re-enable runtime PM after failed resume usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip usb: gadget: core: force synchronous registration
2024-10-13Merge tag 'driver-core-6.12-rc3' of ↵Linus Torvalds3-13/+7
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is a single driver core fix, and a .mailmap update. The fix is for the rust driver core bindings, turned out that the from_raw binding wasn't a good idea (don't want to pass a pointer to a reference counted object without actually incrementing the pointer.) So this change fixes it up as the from_raw binding came in in -rc1. The other change is a .mailmap update. Both have been in linux-next for a while with no reported issues" * tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: mailmap: update mail for Fiona Behrens rust: device: change the from_raw() function
2024-10-12Merge tag 'powerpc-6.12-4' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Fix crash in memcpy on 8xx due to dcbz workaround since recent changes Thanks to Christophe Leroy. * tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/8xx: Fix kernel DTLB miss on dcbz
2024-10-12Merge tag 'scsi-fixes' of ↵Linus Torvalds4-7/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four small fixes, three in drivers and one in the FC transport class to add idempotence to state setting" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: scsi_transport_fc: Allow setting rport state to current state scsi: wd33c93: Don't use stale scsi_pointer value scsi: fnic: Move flush_work initialization out of if block scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
2024-10-12Merge tag 'hwmon-for-v6.12-rc3' of ↵Linus Torvalds3-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Add missing dependencies on REGMAP_I2C for several drivers - Fix memory leak in adt7475 driver - Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon driver to match other sensor labels * tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max1668) Add missing dependency on REGMAP_I2C hwmon: (ltc2991) Add missing dependency on REGMAP_I2C hwmon: (adt7470) Add missing dependency on REGMAP_I2C hwmon: (adm9240) Add missing dependency on REGMAP_I2C hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C hwmon: (tmp513) Add missing dependency on REGMAP_I2C hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config() hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
2024-10-11Merge tag 'linux_kselftest-fixes-6.12-rc3' of ↵Linus Torvalds12-109/+183
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Fixes for build, run-time errors, and reporting errors: - ftrace: regression test for a kernel crash when running function graph tracing and then enabling function profiler. - rseq: fix for mm_cid test failure. - vDSO: - fixes to reporting skip and other error conditions - changes unconditionally build chacha and getrandom tests on all architectures to make it easier for them to run in CIs - build error when sched.h to bring in CLONE_NEWTIME define" * tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: ftrace/selftest: Test combination of function_graph tracer and function profiler selftests/rseq: Fix mm_cid test failure selftests: vDSO: Explicitly include sched.h selftests: vDSO: improve getrandom and chacha error messages selftests: vDSO: unconditionally build getrandom test selftests: vDSO: unconditionally build chacha test
2024-10-11Merge tag 'devicetree-fixes-for-6.12-1' of ↵Linus Torvalds8-7/+103
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Disable kunit tests for arm64+ACPI - Fix refcount issue in kunit tests - Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq - Drop type ref on 'msi-parent in fsl,qoriq-mc binding - Move elgin,jg10309-01 to its own binding from trivial-devices * tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: Skip kunit tests when arm64+ACPI doesn't populate root node of: Fix unbalanced of node refcount and memory leaks dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent dt-bindings: display: elgin,jg10309-01: Add own binding
2024-10-11Merge tag 'fbdev-for-6.12-rc3' of ↵Linus Torvalds70-88/+88
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev platform driver fix from Helge Deller: "Switch fbdev drivers back to struct platform_driver::remove() Now that 'remove()' has been converted to the sane new API, there's no reason for the 'remove_new()' use, so this converts back to the traditional and simpler name. See commits 5c5a7680e67b ("platform: Provide a remove callback that returns no value") 0edb555a65d1 ("platform: Make platform_driver::remove() return void") for background to this all" * tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: Switch back to struct platform_driver::remove()
2024-10-11Merge tag 'gpio-fixes-for-v6.12-rc3' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix clock handle leak in probe() error path in gpio-aspeed - add a dummy register read to ensure the write actually completed * tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: aspeed: Use devm_clk api to manage clock source gpio: aspeed: Add the flush write to ensure the write complete.
2024-10-11Merge tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds15-22/+45
Pull NFS client fixes from Anna Schumaker: "Localio Bugfixes: - remove duplicated include in localio.c - fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put() - fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT - fix nfsd_file tracepoints to handle NULL rqstp pointers Other Bugfixes: - fix program selection loop in svc_process_common - fix integer overflow in decode_rc_list() - prevent NULL-pointer dereference in nfs42_complete_copies() - fix CB_RECALL performance issues when using a large number of delegations" * tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: remove revoked delegation from server's delegation list nfsd/localio: fix nfsd_file tracepoints to handle NULL rqstp nfs_common: fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT nfs_common: fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put() NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies() SUNRPC: Fix integer overflow in decode_rc_list() sunrpc: fix prog selection loop in svc_process_common nfs: Remove duplicated include in localio.c
2024-10-11Merge tag 'rcu.fixes.6.12-rc3' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux Pull RCU fix from Neeraj Upadhyay: "Fix rcuog kthread wakeup invocation from softirq context on a CPU which has been marked offline. This can happen when new callbacks are enqueued from a softirq on an offline CPU before it calls rcutree_report_cpu_dead(). When this happens on NOCB configuration, the rcuog wake-up is deferred through an IPI to an online CPU. This is done to avoid call into the scheduler which can risk arming the RT-bandwidth after hrtimers have been migrated out and disabled. However, doing IPI call from softirq is not allowed: Fix this by forcing deferred rcuog wakeup through the NOCB timer when the CPU is offline" * tag 'rcu.fixes.6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: rcu/nocb: Fix rcuog wake-up from offline softirq
2024-10-11Merge tag 'for-linus-6.12a-rc3-tag' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A fix for topology information of Xen PV guests" * tag 'for-linus-6.12a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: mark boot CPU of PV guest in MSR_IA32_APICBASE
2024-10-11ftrace/selftest: Test combination of function_graph tracer and function profilerSteven Rostedt1-0/+31
Masami reported a bug when running function graph tracing then the function profiler. The following commands would cause a kernel crash: # cd /sys/kernel/tracing/ # echo function_graph > current_tracer # echo 1 > function_profile_enabled In that order. Create a test to test this two to make sure this does not come back as a regression. Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2 Link: https://lore.kernel.org/all/20241010165235.35122877@gandalf.local.home/ Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-10-11selftests/rseq: Fix mm_cid test failureMathieu Desnoyers2-43/+77
Adapt the rseq.c/rseq.h code to follow GNU C library changes introduced by: glibc commit 2e456ccf0c34 ("Linux: Make __rseq_size useful for feature detection (bug 31965)") Without this fix, rseq selftests for mm_cid fail: ./run_param_test.sh Default parameters Running test spinlock Running compare-twice test spinlock Running mm_cid test spinlock Error: cpu id getter unavailable Fixes: 18c2355838e7 ("selftests/rseq: Implement rseq mm_cid field support") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> CC: Boqun Feng <boqun.feng@gmail.com> CC: "Paul E. McKenney" <paulmck@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> CC: Carlos O'Donell <carlos@redhat.com> CC: Florian Weimer <fweimer@redhat.com> CC: linux-kselftest@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-10-11Merge tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linuxLinus Torvalds1-20/+24
Pull io_uring fixes from Jens Axboe: - Explicitly have a mshot_finished condition for IORING_OP_RECV in multishot mode, similarly to what IORING_OP_RECVMSG has. This doesn't fix a bug right now, but it makes it harder to actually have a bug here if a request takes multiple iterations to finish. - Fix handling of retry of read/write of !FMODE_NOWAIT files. If they are pollable, that's all we need. * tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux: io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT io_uring/rw: fix cflags posting for single issue multishot read
2024-10-11Merge tag 'pm-6.12-rc3' of ↵Linus Torvalds4-52/+40
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These address two issues in the TPMI module of the Intel RAPL power capping driver and one issue in the processor part of the Intel int340x thermal driver, update a CPU ID list and register definitions needed for RAPL PL4 support and remove some unused code. Specifics: - Fix the TPMI_RAPL_REG_DOMAIN_INFO register offset in the TPMI part of the Intel RAPL power capping driver, make it ignore minor hardware version mismatches (which only indicate exposing additional features) and update register definitions in it to enable PL4 support (Zhang Rui) - Add Arrow Lake-U to the list of processors supporting PL4 in the MSR part of the Intel RAPL power capping driver (Sumeet Pawnikar) - Remove excess pci_disable_device() calls from the processor part of the int340x thermal driver to address a warning triggered during module unload and remove unused CPU hotplug code related to RAPL support from it (Zhang Rui)" * tag 'pm-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel: int340x: processor: Add MMIO RAPL PL4 support thermal: intel: int340x: processor: Remove MMIO RAPL CPU hotplug support powercap: intel_rapl_msr: Add PL4 support for Arrowlake-U powercap: intel_rapl_tpmi: Ignore minor version change thermal: intel: int340x: processor: Fix warning during module unload powercap: intel_rapl_tpmi: Fix bogus register reading
2024-10-11Merge tag 'thermal-6.12-rc3' of ↵Linus Torvalds3-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "Address possible use-after-free scenarios during the processing of thermal netlink commands and during thermal zone removal (Rafael Wysocki)" * tag 'thermal-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: core: Free tzp copy along with the thermal zone thermal: core: Reference count the zone in thermal_zone_get_by_id()
2024-10-11Merge tag 'acpi-6.12-rc3' of ↵Linus Torvalds1-66/+10
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "Reduce the number of ACPI IRQ override DMI quirks by combining quirks that cover similar systems while making them cover additional models at the same time (Hans de Goede)" * tag 'acpi-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: resource: Fold Asus Vivobook Pro N6506M* DMI quirks together ACPI: resource: Fold Asus ExpertBook B1402C* and B1502C* DMI quirks together ACPI: resource: Make Asus ExpertBook B2502 matches cover more models ACPI: resource: Make Asus ExpertBook B2402 matches cover more models
2024-10-11Merge tag 'pmdomain-v6.12-rc1' of ↵Linus Torvalds4-25/+52
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain fixes from Ulf Hansson: "pmdomain core: - Fix alloc/free in dev_pm_domain_attach|detach_list() pmdomain providers: - qcom: Fix the return of uninitialized variable pmdomain consumers: - drm/tegra/gr3d: Revert conversion to dev_pm_domain_attach|detach_list() OPP core: - Fix error code in dev_pm_opp_set_config()" * tag 'pmdomain-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: PM: domains: Fix alloc/free in dev_pm_domain_attach|detach_list() Revert "drm/tegra: gr3d: Convert into dev_pm_domain_attach|detach_list()" pmdomain: qcom-cpr: Fix the return of uninitialized variable OPP: fix error code in dev_pm_opp_set_config()
2024-10-11Merge tag 'mmc-v6.12-rc1' of ↵Linus Torvalds3-54/+28
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Prevent splat from warning when setting maximum DMA segment MMC host: - mvsdio: Drop sg_miter support for PIO as it didn't work - sdhci-of-dwcmshc: Prevent stale interrupt for the T-Head 1520 variant" * tag 'mmc-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-of-dwcmshc: Prevent stale command interrupt handling Revert "mmc: mvsdio: Use sg_miter for PIO" mmc: core: Only set maximum DMA segment size if DMA is supported
2024-10-11Merge tag 'ata-6.12-rc3' of ↵Linus Torvalds2-10/+14
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fixes from Niklas Cassel: - Fix a hibernate regression where the disk was needlessly spun down and then immediately spun up both when entering and when resuming from hibernation (me) - Update the MAINTAINERS file to remove remnants from Jens maintainership of libata (Damien) * tag 'ata-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: libata: Update MAINTAINERS file ata: libata: avoid superfluous disk spin down + spin up during hibernation
2024-10-11Merge tag 'drm-fixes-2024-10-11' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds22-158/+149
Pull drm fixes from Dave Airlie: "Weekly fixes haul for drm, lots of small fixes all over, amdgpu, xe lead the way, some minor nouveau and radeon fixes, and then a bunch of misc all over. Nothing too scary or out of the unusual. sched: - Avoid leaking lockdep map fbdev-dma: - Only clean up deferred I/O if instanciated amdgpu: - Fix invalid UBSAN warnings - Fix artifacts in MPO transitions - Hibernation fix amdkfd: - Fix an eviction fence leak radeon: - Add late register for connectors - Always set GEM function pointers i915: - HDCP refcount fix nouveau: - dmem: Fix privileged error in copy engine channel; Fix possible data leak in migrate_to_ram() - gsp: Fix coding style v3d: - Stop active perfmon before destroying it vc4: - Stop active perfmon before destroying it xe: - Drop GuC submit_wq pool - Fix error checking with xa_store() - Fix missing freq restore on GSC load error - Fix wedged_mode file permission - Fix use-after-free in ct communication" * tag 'drm-fixes-2024-10-11' of https://gitlab.freedesktop.org/drm/kernel: drm/fbdev-dma: Only cleanup deferred I/O if necessary drm/xe: Make wedged_mode debugfs writable drm/xe: Restore GT freq on GSC load error drm/xe/guc_submit: fix xa_store() error checking drm/xe/ct: fix xa_store() error checking drm/xe/ct: prevent UAF in send_recv() drm/radeon: always set GEM function pointer nouveau/dmem: Fix vulnerability in migrate_to_ram upon copy error nouveau/dmem: Fix privileged error in copy engine channel drm/amd/display: fix hibernate entry for DCN35+ drm/amd/display: Clear update flags after update has been applied drm/amdgpu: partially revert powerplay `__counted_by` changes drm/radeon: add late_register for connector drm/amdkfd: Fix an eviction fence leak drm/vc4: Stop the active perfmon before being destroyed drm/v3d: Stop the active perfmon before being destroyed drm/i915/hdcp: fix connector refcounting drm/nouveau/gsp: remove extraneous ; after mutex drm/xe: Drop GuC submit_wq pool drm/sched: Use drm sched lockdep map for submit_wq
2024-10-11powerpc/8xx: Fix kernel DTLB miss on dcbzChristophe Leroy1-0/+1
Following OOPS is encountered while loading test_bpf module on powerpc 8xx: [ 218.835567] BUG: Unable to handle kernel data access on write at 0xcb000000 [ 218.842473] Faulting instruction address: 0xc0017a80 [ 218.847451] Oops: Kernel access of bad area, sig: 11 [#1] [ 218.852854] BE PAGE_SIZE=16K PREEMPT CMPC885 [ 218.857207] SAF3000 DIE NOTIFICATION [ 218.860713] Modules linked in: test_bpf(+) test_module [ 218.865867] CPU: 0 UID: 0 PID: 527 Comm: insmod Not tainted 6.11.0-s3k-dev-09856-g3de3d71ae2e6-dirty #1280 [ 218.875546] Hardware name: MIAE 8xx 0x500000 CMPC885 [ 218.880521] NIP: c0017a80 LR: beab859c CTR: 000101d4 [ 218.885584] REGS: cac2bc90 TRAP: 0300 Not tainted (6.11.0-s3k-dev-09856-g3de3d71ae2e6-dirty) [ 218.894308] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 55005555 XER: a0007100 [ 218.901290] DAR: cb000000 DSISR: c2000000 [ 218.901290] GPR00: 000185d1 cac2bd50 c21b9580 caf7c030 c3883fcc 00000008 cafffffc 00000000 [ 218.901290] GPR08: 00040000 18300000 20000000 00000004 99005555 100d815e ca669d08 00000369 [ 218.901290] GPR16: ca730000 00000000 ca2c004c 00000000 00000000 0000035d 00000311 00000369 [ 218.901290] GPR24: ca732240 00000001 00030ba3 c3800000 00000000 00185d48 caf7c000 ca2c004c [ 218.941087] NIP [c0017a80] memcpy+0x88/0xec [ 218.945277] LR [beab859c] test_bpf_init+0x22c/0x3c90 [test_bpf] [ 218.951476] Call Trace: [ 218.953916] [cac2bd50] [beab8570] test_bpf_init+0x200/0x3c90 [test_bpf] (unreliable) [ 218.962034] [cac2bde0] [c0004c04] do_one_initcall+0x4c/0x1fc [ 218.967706] [cac2be40] [c00a2ec4] do_init_module+0x68/0x360 [ 218.973292] [cac2be60] [c00a5194] init_module_from_file+0x8c/0xc0 [ 218.979401] [cac2bed0] [c00a5568] sys_finit_module+0x250/0x3f0 [ 218.985248] [cac2bf20] [c000e390] system_call_exception+0x8c/0x15c [ 218.991444] [cac2bf30] [c00120a8] ret_from_syscall+0x0/0x28 This happens in the main loop of memcpy() ==> c0017a80: 7c 0b 37 ec dcbz r11,r6 c0017a84: 80 e4 00 04 lwz r7,4(r4) c0017a88: 81 04 00 08 lwz r8,8(r4) c0017a8c: 81 24 00 0c lwz r9,12(r4) c0017a90: 85 44 00 10 lwzu r10,16(r4) c0017a94: 90 e6 00 04 stw r7,4(r6) c0017a98: 91 06 00 08 stw r8,8(r6) c0017a9c: 91 26 00 0c stw r9,12(r6) c0017aa0: 95 46 00 10 stwu r10,16(r6) c0017aa4: 42 00 ff dc bdnz c0017a80 <memcpy+0x88> Commit ac9f97ff8b32 ("powerpc/8xx: Inconditionally use task PGDIR in DTLB misses") relies on re-reading DAR register to know if an error is due to a missing copy of a PMD entry in task's PGDIR, allthough DAR was already read in the exception prolog and copied into thread struct. This is because is it done very early in the exception and there are not enough registers available to keep a pointer to thread struct. However, dcbz instruction is buggy and doesn't update DAR register on fault. That is detected and generates a call to FixupDAR workaround which updates DAR copy in thread struct but doesn't fix DAR register. Let's fix DAR in addition to the update of DAR copy in thread struct. Fixes: ac9f97ff8b32 ("powerpc/8xx: Inconditionally use task PGDIR in DTLB misses") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/2b851399bd87e81c6ccb87ea3a7a6b32c7aa04d7.1728118396.git.christophe.leroy@csgroup.eu
2024-10-11Merge tag 'drm-xe-fixes-2024-10-10' of ↵Dave Airlie4-26/+33
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes Driver Changes: - Fix error checking with xa_store() (Matthe Auld) - Fix missing freq restore on GSC load error (Vinay) - Fix wedged_mode file permission (Matt Roper) - Fix use-after-free in ct communication (Matthew Auld) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/jri65tmv3bjbhqhxs5smv45nazssxzhtwphojem4uufwtjuliy@gsdhlh6kzsdy
2024-10-11Merge tag 'drm-misc-fixes-2024-10-10' of ↵Dave Airlie9-88/+31
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes Short summary of fixes pull: fbdev-dma: - Only clean up deferred I/O if instanciated nouveau: - dmem: Fix privileged error in copy engine channel; Fix possible data leak in migrate_to_ram() - gsp: Fix coding style sched: - Avoid leaking lockdep map v3d: - Stop active perfmon before destroying it vc4: - Stop active perfmon before destroying it xe: - Drop GuC submit_wq pool Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20241010133708.GA461532@localhost.localdomain
2024-10-11Merge tag 'drm-intel-fixes-2024-10-10' of ↵Dave Airlie1-3/+7
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - HDCP refcount fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zwd78Tnw8t3w9F16@jlahtine-mobl.ger.corp.intel.com
2024-10-10Merge tag 'net-6.12-rc3' of ↵Linus Torvalds115-488/+1339
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bluetooth and netfilter. Current release - regressions: - dsa: sja1105: fix reception from VLAN-unaware bridges - Revert "net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled" - eth: fec: don't save PTP state if PTP is unsupported Current release - new code bugs: - smc: fix lack of icsk_syn_mss with IPPROTO_SMC, prevent null-deref - eth: airoha: update Tx CPU DMA ring idx at the end of xmit loop - phy: aquantia: AQR115c fix up PMA capabilities Previous releases - regressions: - tcp: 3 fixes for retrans_stamp and undo logic Previous releases - always broken: - net: do not delay dst_entries_add() in dst_release() - netfilter: restrict xtables extensions to families that are safe, syzbot found a way to combine ebtables with extensions that are never used by userspace tools - sctp: ensure sk_state is set to CLOSED if hashing fails in sctp_listen_start - mptcp: handle consistently DSS corruption, and prevent corruption due to large pmtu xmit" * tag 'net-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) MAINTAINERS: Add headers and mailing list to UDP section MAINTAINERS: consistently exclude wireless files from NETWORKING [GENERAL] slip: make slhc_remember() more robust against malicious packets net/smc: fix lacks of icsk_syn_mss with IPPROTO_SMC ppp: fix ppp_async_encode() illegal access docs: netdev: document guidance on cleanup patches phonet: Handle error of rtnl_register_module(). mpls: Handle error of rtnl_register_module(). mctp: Handle error of rtnl_register_module(). bridge: Handle error of rtnl_register_module(). vxlan: Handle error of rtnl_register_module(). rtnetlink: Add bulk registration helpers for rtnetlink message handlers. net: do not delay dst_entries_add() in dst_release() mptcp: pm: do not remove closing subflows mptcp: fallback when MPTCP opts are dropped after 1st data tcp: fix mptcp DSS corruption due to large pmtu xmit mptcp: handle consistently DSS corruption net: netconsole: fix wrong warning net: dsa: refuse cross-chip mirroring operations net: fec: don't save PTP state if PTP is unsupported ...
2024-10-10Merge tag 'trace-ringbuffer-v6.12-rc2' of ↵Linus Torvalds1-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fix from Steven Rostedt: "Ring-buffer fix: do not have boot-mapped buffers use CPU hotplug callbacks When a ring buffer is mapped to memory assigned at boot, it also splits it up evenly between the possible CPUs. But the allocation code still attached a CPU notifier callback to this ring buffer. When a CPU is added, the callback will happen and another per-cpu buffer is created for the ring buffer. But for boot mapped buffers, there is no room to add another one (as they were all created already). The result of calling the CPU hotplug notifier on a boot mapped ring buffer is unpredictable and could lead to a system crash. If the ring buffer is boot mapped simply do not attach the CPU notifier to it" * tag 'trace-ringbuffer-v6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: ring-buffer: Do not have boot mapped buffers hook to CPU hotplug
2024-10-10of: Skip kunit tests when arm64+ACPI doesn't populate root nodeStephen Boyd4-0/+24
A root node is required to apply DT overlays. A root node is usually present after commit 7b937cc243e5 ("of: Create of_root if no dtb provided by firmware"), except for on arm64 systems booted with ACPI tables. In that case, the root node is intentionally not populated because it would "allow DT devices to be instantiated atop an ACPI base system"[1]. Introduce an OF function that skips the kunit test if the root node isn't populated. Limit the test to when both CONFIG_ARM64 and CONFIG_ACPI are set, because otherwise the lack of a root node is a bug. Make the function private and take a kunit test parameter so that it can't be abused to test for the presence of the root node in non-test code. Use this function to skip tests that require the root node. Currently that's the DT tests and any tests that apply overlays. Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/r/6cd337fb-38f0-41cb-b942-5844b84433db@roeck-us.net Link: https://lore.kernel.org/r/Zd4dQpHO7em1ji67@FVFF77S0Q05N.cambridge.arm.com [1] Fixes: 893ecc6d2d61 ("of: Add KUnit test to confirm DTB is loaded") Signed-off-by: Stephen Boyd <sboyd@kernel.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20241009204133.1169931-1-sboyd@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-10-10Merge tag 'for-6.12-rc2-tag' of ↵Linus Torvalds7-24/+76
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - update fstrim loop and add more cancellation points, fix reported delayed or blocked suspend if there's a huge chunk queued - fix error handling in recent qgroup xarray conversion - in zoned mode, fix warning printing device path without RCU protection - again fix invalid extent xarray state (6252690f7e1b), lost due to refactoring * tag 'for-6.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix clear_dirty and writeback ordering in submit_one_sector() btrfs: zoned: fix missing RCU locking in error message when loading zone info btrfs: fix missing error handling when adding delayed ref with qgroups enabled btrfs: add cancellation points to trim loops btrfs: split remaining space to discard in chunks
2024-10-10Merge tag 'nfsd-6.12-1' of ↵Linus Torvalds3-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Fix NFSD bring-up / shutdown - Fix a UAF when releasing a stateid * tag 'nfsd-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: fix possible badness in FREE_STATEID nfsd: nfsd_destroy_serv() must call svc_destroy() even if nfsd_startup_net() failed NFSD: Mark filecache "down" if init fails
2024-10-10rcu/nocb: Fix rcuog wake-up from offline softirqFrederic Weisbecker1-1/+7
After a CPU has set itself offline and before it eventually calls rcutree_report_cpu_dead(), there are still opportunities for callbacks to be enqueued, for example from a softirq. When that happens on NOCB, the rcuog wake-up is deferred through an IPI to an online CPU in order not to call into the scheduler and risk arming the RT-bandwidth after hrtimers have been migrated out and disabled. But performing a synchronized IPI from a softirq is buggy as reported in the following scenario: WARNING: CPU: 1 PID: 26 at kernel/smp.c:633 smp_call_function_single Modules linked in: rcutorture torture CPU: 1 UID: 0 PID: 26 Comm: migration/1 Not tainted 6.11.0-rc1-00012-g9139f93209d1 #1 Stopper: multi_cpu_stop+0x0/0x320 <- __stop_cpus+0xd0/0x120 RIP: 0010:smp_call_function_single <IRQ> swake_up_one_online __call_rcu_nocb_wake __call_rcu_common ? rcu_torture_one_read call_timer_fn __run_timers run_timer_softirq handle_softirqs irq_exit_rcu ? tick_handle_periodic sysvec_apic_timer_interrupt </IRQ> Fix this with forcing deferred rcuog wake up through the NOCB timer when the CPU is offline. The actual wake up will happen from rcutree_report_cpu_dead(). Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202409231644.4c55582d-lkp@intel.com Fixes: 9139f93209d1 ("rcu/nocb: Fix RT throttling hrtimer armed from offline CPU") Reviewed-by: "Joel Fernandes (Google)" <joel@joelfernandes.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.