aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-09-07Merge tag 'backlight-next-5.15' of ↵Linus Torvalds2-46/+83
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight updates from Lee Jones: "Fix-ups: - Improve bootloader/kernel device handover Bug Fixes: - Stabilise backlight in ktd253 driver" * tag 'backlight-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Improve bootloader/kernel device handover backlight: ktd253: Stabilize backlight
2021-09-07Merge tag 'mfd-next-5.15' of ↵Linus Torvalds37-120/+1906
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks: - Add support for registering devices via MFD cells to Simple MFD (I2C) New Drivers: - Add support for Renesas Synchronization Management Unit (SMU) New Device Support: - Add support for N5010 to Intel M10 BMC - Add support for Cannon Lake to Intel LPSS ACPI - Add support for Samsung SSG{1,2} to ST-Ericsson's U8500 family - Add support for TQMx110EB and TQMxE40x to TQ-Systems PLD TQMx86 New Functionality: - Add support for GPIO to Intel LPC ICH - Add support for Reset to Texas Instruments TPS65086 Fix-ups: - Trivial, sorting, whitespace, renaming, etc; mt6360-core, db8500-prcmu-regs, tqmx86 - Device Tree fiddling; syscon, axp20x, qcom,pm8008, ti,tps65086, brcm,cru - Use proper APIs for IRQ map resolution; ab8500-core, stmpe, tc3589x, wm8994-irq - Pass 'supplied-from' property through axp288_fuel_gauge via swnode - Remove unused file entry; MAINTAINERS - Make interrupt line optional; tps65086 - Rename db8500-cpuidle driver symbol; db8500-prcmu - Remove support for unused hardware; tqmx86 - Provide a standard LPC clock frequency for unknown boards; tqmx86 - Remove unused code; ti_am335x_tscadc - Use of_iomap() instead of ioremap(); syscon Bug Fixes: - Clear GPIO IRQ resource flags when no IRQ is set; tqmx86 - Fix incorrect/misleading frequencies; db8500-prcmu - Mitigate namespace clash with other GPIOBASE users" * tag 'mfd-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (31 commits) mfd: lpc_sch: Rename GPIOBASE to prevent build error mfd: syscon: Use of_iomap() instead of ioremap() dt-bindings: mfd: Add Broadcom CRU mfd: ti_am335x_tscadc: Delete superfluous error message mfd: tqmx86: Assume 24MHz LPC clock for unknown boards mfd: tqmx86: Add support for TQ-Systems DMI IDs mfd: tqmx86: Add support for TQMx110EB and TQMxE40x mfd: tqmx86: Fix typo in "platform" mfd: tqmx86: Remove incorrect TQMx90UC board ID mfd: tqmx86: Clear GPIO IRQ resource when no IRQ is set mfd: simple-mfd-i2c: Add support for registering devices via MFD cells mfd/cpuidle: ux500: Rename driver symbol mfd: tps65086: Add cell entry for reset driver mfd: tps65086: Make interrupt line optional dt-bindings: mfd: Convert tps65086.txt to YAML MAINTAINERS: Adjust ARM/NOMADIK/Ux500 ARCHITECTURES to file renaming mfd: db8500-prcmu: Handle missing FW variant mfd: db8500-prcmu: Rename register header mfd: axp20x: Add supplied-from property to axp288_fuel_gauge cell mfd: Don't use irq_create_mapping() to resolve a mapping ...
2021-09-07Merge tag 'gpio-updates-for-v5.15' of ↵Linus Torvalds29-447/+752
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We mostly have various improvements and refactoring all over the place but also some interesting new features - like the virtio GPIO driver that allows guest VMs to use host's GPIOs. We also have a new/old GPIO driver for rockchip - this one has been split out of the pinctrl driver. Summary: - new driver: gpio-virtio allowing a guest VM running linux to access GPIO lines provided by the host - split the GPIO driver out of the rockchip pin control driver - add support for a new model to gpio-aspeed-sgpio, refactor the driver and use generic device property interfaces, improve property sanitization - add ACPI support to gpio-tegra186 - improve the code setting the line names to support multiple GPIO banks per device - constify a bunch of OF functions in the core GPIO code and make the declaration for one of the core OF functions we use consistent within its header - use software nodes in intel_quark_i2c_gpio - add support for the gpio-line-names property in gpio-mt7621 - use the standard GPIO function for setting the GPIO names in gpio-brcmstb - fix a bunch of leaks and other bugs in gpio-mpc8xxx - use generic pm callbacks in gpio-ml-ioh - improve resource management and PM handling in gpio-mlxbf2 - modernize and improve the gpio-dwapb driver - coding style improvements in gpio-rcar - documentation fixes and improvements - update the MAINTAINERS entry for gpio-zynq - minor tweaks in several drivers" * tag 'gpio-updates-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (35 commits) gpio: mpc8xxx: Use 'devm_gpiochip_add_data()' to simplify the code and avoid a leak gpio: mpc8xxx: Fix a potential double iounmap call in 'mpc8xxx_probe()' gpio: mpc8xxx: Fix a resources leak in the error handling path of 'mpc8xxx_probe()' gpio: viperboard: remove platform_set_drvdata() call in probe gpio: virtio: Add missing mailings lists in MAINTAINERS entry gpio: virtio: Fix sparse warnings gpio: remove the obsolete MX35 3DS BOARD MC9S08DZ60 GPIO functions gpio: max730x: Use the right include gpio: Add virtio-gpio driver gpio: mlxbf2: Use DEFINE_RES_MEM_NAMED() helper macro gpio: mlxbf2: Use devm_platform_ioremap_resource() gpio: mlxbf2: Drop wrong use of ACPI_PTR() gpio: mlxbf2: Convert to device PM ops gpio: dwapb: Get rid of legacy platform data mfd: intel_quark_i2c_gpio: Convert GPIO to use software nodes gpio: dwapb: Read GPIO base from gpio-base property gpio: dwapb: Unify ACPI enumeration checks in get_irq() and configure_irqs() gpiolib: Deduplicate forward declaration in the consumer.h header MAINTAINERS: update gpio-zynq.yaml reference gpio: tegra186: Add ACPI support ...
2021-09-07Merge tag 'fuse-update-5.15' of ↵Linus Torvalds6-80/+214
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Allow mounting an active fuse device. Previously the fuse device would always be mounted during initialization, and sharing a fuse superblock was only possible through mount or namespace cloning - Fix data flushing in syncfs (virtiofs only) - Fix data flushing in copy_file_range() - Fix a possible deadlock in atomic O_TRUNC - Misc fixes and cleanups * tag 'fuse-update-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: remove unused arg in fuse_write_file_get() fuse: wait for writepages in syncfs fuse: flush extending writes fuse: truncate pagecache on atomic_o_trunc fuse: allow sharing existing sb fuse: move fget() to fuse_get_tree() fuse: move option checking into fuse_fill_super() fuse: name fs_context consistently fuse: fix use after free in fuse_read_interrupt()
2021-09-07Merge tag 'kgdb-5.15-rc1' of ↵Linus Torvalds10-728/+387
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb updates from Daniel Thompson: "Changes for kgdb/kdb this cycle are dominated by a change from Sumit that removes as small (256K) private heap from kdb. This is change I've hoped for ever since I discovered how few users of this heap remained in the kernel, so many thanks to Sumit for hunting these down. The other change is an incremental step towards SPDX headers" * tag 'kgdb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kernel: debug: Convert to SPDX identifier kdb: Rename members of struct kdbtab_t kdb: Simplify kdb_defcmd macro logic kdb: Get rid of redundant kdb_register_flags() kdb: Rename struct defcmd_set to struct kdb_macro kdb: Get rid of custom debug heap allocator
2021-09-07Revert "memcg: enable accounting for pollfd and select bits arrays"Linus Torvalds1-2/+2
This reverts commit b655843444152c0a14b749308e4cb35d91cbcf0b. Just like with the memcg lock accounting, the kernel test robot reports a sizeable performance regression for this commit, and while it clearly does the rigth thing in theory, we'll need to look at just how to avoid or minimize the performance overhead of the memcg accounting. People already have suggestions on how to do that, but it's "future work". So revert it for now. [ Note: the first link below is for this same commit but a different commit ID, because it's the kernel test robot ended up noticing it in Andrew Morton's patch queue ] Link: https://lore.kernel.org/lkml/20210905132732.GC15026@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/lkml/20210907150757.GE17617@xsang-OptiPlex-9020/ Acked-by: Jens Axboe <[email protected]> Acked-by: Shakeel Butt <[email protected]> Acked-by: Roman Gushchin <[email protected]> Cc: Tejun Heo <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-07Revert "memcg: enable accounting for file lock caches"Linus Torvalds1-4/+2
This reverts commit 0f12156dff2862ac54235fc72703f18770769042. The kernel test robot reports a sizeable performance regression for this commit, and while it clearly does the rigth thing in theory, we'll need to look at just how to avoid or minimize the performance overhead of the memcg accounting. People already have suggestions on how to do that, but it's "future work". So revert it for now. Link: https://lore.kernel.org/lkml/20210907150757.GE17617@xsang-OptiPlex-9020/ Acked-by: Jens Axboe <[email protected]> Acked-by: Shakeel Butt <[email protected]> Acked-by: Roman Gushchin <[email protected]> Cc: Tejun Heo <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-07Revert "mm/gup: remove try_get_page(), call try_get_compound_head() directly"Linus Torvalds4-20/+15
This reverts commit 9857a17f206ff374aea78bccfb687f145368be2e. That commit was completely broken, and I should have caught on to it earlier. But happily, the kernel test robot noticed the breakage fairly quickly. The breakage is because "try_get_page()" is about avoiding the page reference count overflow case, but is otherwise the exact same as a plain "get_page()". In contrast, "try_get_compound_head()" is an entirely different beast, and uses __page_cache_add_speculative() because it's not just about the page reference count, but also about possibly racing with the underlying page going away. So all the commentary about how "try_get_page() has fallen a little behind in terms of maintenance, try_get_compound_head() handles speculative page references more thoroughly" was just completely wrong: yes, try_get_compound_head() handles speculative page references, but the point is that try_get_page() does not, and must not. So there's no lack of maintainance - there are fundamentally different semantics. A speculative page reference would be entirely wrong in "get_page()", and it's entirely wrong in "try_get_page()". It's not about speculation, it's purely about "uhhuh, you can't get this page because you've tried to increment the reference count too much already". The reason the kernel test robot noticed this bug was that it hit the VM_BUG_ON() in __page_cache_add_speculative(), which is all about verifying that the context of any speculative page access is correct. But since that isn't what try_get_page() is all about, the VM_BUG_ON() tests things that are not correct to test for try_get_page(). Reported-by: kernel test robot <[email protected]> Cc: John Hubbard <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-07ieee802154: Remove redundant initialization of variable retColin Ian King1-1/+1
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-07Merge branch 'stmmac-wol-fix'David S. Miller3-18/+103
Joakim Zhang says: ==================== net: stmmac: fix WoL issue This patch set fixes stmmac not working after system resume back with WoL active. Thanks a lot for Russell King keeps looking into this issue. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-09-07net: stmmac: fix MAC not working when system resume back with WoL activeJoakim Zhang1-18/+18
We can reproduce this issue with below steps: 1) enable WoL on the host 2) host system suspended 3) remote client send out wakeup packets We can see that host system resume back, but can't work, such as ping failed. After a bit digging, this issue is introduced by the commit 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()"), which use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). There are two scenarios for MAC suspend/resume in STMMAC driver: 1) MAC suspend with WoL inactive, stmmac_suspend() call phylink_mac_change() to notify phylink machine that a change in MAC state, then .mac_link_down callback would be invoked. Further, it will call phylink_stop() to stop the phylink instance. When MAC resume back, firstly phylink_start() is called to start the phylink instance, then call phylink_mac_change() which will finally trigger phylink machine to invoke .mac_config and .mac_link_up callback. All is fine since configuration in these two callbacks will be initialized, that means MAC can restore the state. 2) MAC suspend with WoL active, phylink_mac_change() will put link down, but there is no phylink_stop() to stop the phylink instance, so it will link up again, that means .mac_config and .mac_link_up would be invoked before system suspended. After system resume back, it will do DMA initialization and SW reset which let MAC lost the hardware setting (i.e MAC_Configuration register(offset 0x0) is reset). Since link is up before system suspended, so .mac_link_up would not be invoked after system resume back, lead to there is no chance to initialize the configuration in .mac_link_up callback, as a result, MAC can't work any longer. After discussed with Russell King [1], we confirm that phylink framework have not take WoL into consideration yet. This patch calls phylink_suspend()/phylink_resume() functions which is newly introduced by Russell King to fix this issue. [1] https://lore.kernel.org/netdev/[email protected]/ Fixes: 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()") Signed-off-by: Joakim Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-07net: phylink: add suspend/resume supportRussell King (Oracle)2-0/+85
Joakim Zhang reports that Wake-on-Lan with the stmmac ethernet driver broke when moving the incorrect handling of mac link state out of mac_config(). This reason this breaks is because the stmmac's WoL is handled by the MAC rather than the PHY, and phylink doesn't cater for that scenario. This patch adds the necessary phylink code to handle suspend/resume events according to whether the MAC still needs a valid link or not. This is the barest minimum for this support. Reported-by: Joakim Zhang <[email protected]> Tested-by: Joakim Zhang <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]> Signed-off-by: Joakim Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-07net: renesas: sh_eth: Fix freeing wrong tx descriptorYoshihiro Shimoda1-0/+1
The cur_tx counter must be incremented after TACT bit of txdesc->status was set. However, a CPU is possible to reorder instructions and/or memory accesses between cur_tx and txdesc->status. And then, if TX interrupt happened at such a timing, the sh_eth_tx_free() may free the descriptor wrongly. So, add wmb() before cur_tx++. Otherwise NETDEV WATCHDOG timeout is possible to happen. Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet") Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-07bonding: 3ad: pass parameter bond_params by referenceColin Ian King1-4/+4
The parameter bond_params is a relatively large 192 byte sized struct so pass it by reference rather than by value to reduce copying. Addresses-Coverity: ("Big parameter passed by value") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-07Merge tag 'linux-can-fixes-for-5.15-20210907' of ↵David S. Miller2-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can linux-can-fixes-for-5.15-20210907 Signed-off-by: David S. Miller <[email protected]>
2021-09-07Merge tag 'wireless-drivers-2021-09-07' of ↵David S. Miller4-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.15 First set of fixes for v5.15 and only iwlwifi patches this time. Most important being support for new hardware and new firmware API. I had already earlier applied a fix which also Linus applied to this tree as commit 1476ff21abb4 ("iwl: fix debug printf format strings"), but this doesn't seem to cause any conflicts so I left it there. iwlwifi * add support for firmware API 66 * add support for Samsung Galaxy Book Flex2 Alpha * fix a leak happening every time module is loaded * fix a printk compiler warning ==================== Signed-off-by: David S. Miller <[email protected]>
2021-09-07cxgb3: fix oops on module removalHeiner Kallweit1-0/+3
When removing the driver module w/o bringing an interface up before the error below occurs. Reason seems to be that cancel_work_sync() is called in t3_sge_stop() for a queue that hasn't been initialized yet. [10085.941785] ------------[ cut here ]------------ [10085.941799] WARNING: CPU: 1 PID: 5850 at kernel/workqueue.c:3074 __flush_work+0x3ff/0x480 [10085.941819] Modules linked in: vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio led_class ee1004 iTCO_ wdt intel_tcc_cooling x86_pkg_temp_thermal coretemp aesni_intel crypto_simd cryptd snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core r 8169 snd_pcm realtek mdio_devres snd_timer snd i2c_i801 i2c_smbus libphy i915 i2c_algo_bit cxgb3(-) intel_gtt ttm mdio drm_kms_helper mei_me s yscopyarea sysfillrect sysimgblt mei fb_sys_fops acpi_pad sch_fq_codel crypto_user drm efivarfs ext4 mbcache jbd2 crc32c_intel [10085.941944] CPU: 1 PID: 5850 Comm: rmmod Not tainted 5.14.0-rc7-next-20210826+ #6 [10085.941974] Hardware name: System manufacturer System Product Name/PRIME H310I-PLUS, BIOS 2603 10/21/2019 [10085.941992] RIP: 0010:__flush_work+0x3ff/0x480 [10085.942003] Code: c0 74 6b 65 ff 0d d1 bd 78 75 e8 bc 2f 06 00 48 c7 c6 68 b1 88 8a 48 c7 c7 e0 5f b4 8b 45 31 ff e8 e6 66 04 00 e9 4b fe ff ff <0f> 0b 45 31 ff e9 41 fe ff ff e8 72 c1 79 00 85 c0 74 87 80 3d 22 [10085.942036] RSP: 0018:ffffa1744383fc08 EFLAGS: 00010246 [10085.942048] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000923 [10085.942062] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff91c901710a88 [10085.942076] RBP: ffffa1744383fce8 R08: 0000000000000001 R09: 0000000000000001 [10085.942090] R10: 00000000000000c2 R11: 0000000000000000 R12: ffff91c901710a88 [10085.942104] R13: 0000000000000000 R14: ffff91c909a96100 R15: 0000000000000001 [10085.942118] FS: 00007fe417837740(0000) GS:ffff91c969d00000(0000) knlGS:0000000000000000 [10085.942134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10085.942146] CR2: 000055a8d567ecd8 CR3: 0000000121690003 CR4: 00000000003706e0 [10085.942160] Call Trace: [10085.942166] ? __lock_acquire+0x3af/0x22e0 [10085.942177] ? cancel_work_sync+0xb/0x10 [10085.942187] __cancel_work_timer+0x128/0x1b0 [10085.942197] ? __pm_runtime_resume+0x5b/0x90 [10085.942208] cancel_work_sync+0xb/0x10 [10085.942217] t3_sge_stop+0x2f/0x50 [cxgb3] [10085.942234] remove_one+0x26/0x190 [cxgb3] [10085.942248] pci_device_remove+0x39/0xa0 [10085.942258] __device_release_driver+0x15e/0x240 [10085.942269] driver_detach+0xd9/0x120 [10085.942278] bus_remove_driver+0x53/0xd0 [10085.942288] driver_unregister+0x2c/0x50 [10085.942298] pci_unregister_driver+0x31/0x90 [10085.942307] cxgb3_cleanup_module+0x10/0x18c [cxgb3] [10085.942324] __do_sys_delete_module+0x191/0x250 [10085.942336] ? syscall_enter_from_user_mode+0x21/0x60 [10085.942347] ? trace_hardirqs_on+0x2a/0xe0 [10085.942357] __x64_sys_delete_module+0x13/0x20 [10085.942368] do_syscall_64+0x40/0x90 [10085.942377] entry_SYSCALL_64_after_hwframe+0x44/0xae [10085.942389] RIP: 0033:0x7fe41796323b Fixes: 5e0b8928927f ("net:cxgb3: replace tasklets with works") Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-07mfd: lpc_sch: Rename GPIOBASE to prevent build errorRandy Dunlap1-2/+2
One MIPS platform (mach-rc32434) defines GPIOBASE. This macro conflicts with one of the same name in lpc_sch.c. Rename the latter one to prevent the build error. ../drivers/mfd/lpc_sch.c:25: error: "GPIOBASE" redefined [-Werror] 25 | #define GPIOBASE 0x44 ../arch/mips/include/asm/mach-rc32434/rb.h:32: note: this is the location of the previous definition 32 | #define GPIOBASE 0x050000 Cc: Denis Turischev <[email protected]> Fixes: e82c60ae7d3a ("mfd: Introduce lpc_sch for Intel SCH LPC bridge") Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2021-09-07mfd: syscon: Use of_iomap() instead of ioremap()Hector Martin1-1/+1
This automatically selects between ioremap() and ioremap_np() on platforms that require it, such as Apple SoCs. Signed-off-by: Hector Martin <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2021-09-07can: c_can: fix null-ptr-deref on ioctl()Tong Zhang1-3/+1
The pdev maybe not a platform device, e.g. c_can_pci device, in this case, calling to_platform_device() would not make sense. Also, per the comment in drivers/net/can/c_can/c_can_ethtool.c, @bus_info should match dev_name() string, so I am replacing this with dev_name() to fix this issue. [ 1.458583] BUG: unable to handle page fault for address: 0000000100000000 [ 1.460921] RIP: 0010:strnlen+0x1a/0x30 [ 1.466336] ? c_can_get_drvinfo+0x65/0xb0 [c_can] [ 1.466597] ethtool_get_drvinfo+0xae/0x360 [ 1.466826] dev_ethtool+0x10f8/0x2970 [ 1.467880] sock_ioctl+0xef/0x300 Fixes: 2722ac986e93 ("can: c_can: add ethtool support") Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] # 5.14+ Signed-off-by: Tong Zhang <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-09-07can: rcar_canfd: add __maybe_unused annotation to silence warningMarc Kleine-Budde1-1/+1
Since commit | dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") the rcar_canfd driver can be compile tested on all architectures. On non OF enabled archs, or archs where OF is optional (and disabled in the .config) the compilation throws the following warning: | drivers/net/can/rcar/rcar_canfd.c:2020:34: warning: unused variable 'rcar_canfd_of_table' [-Wunused-const-variable] | static const struct of_device_id rcar_canfd_of_table[] = { | ^ This patch fixes the warning by marking the variable rcar_canfd_of_table as __maybe_unused. Fixes: ac4224087312 ("can: rcar: Kconfig: Add helper dependency on COMPILE_TEST") Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Cc: Cai Huoqing <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-09-06thunderbolt: test: split up test cases in tb_test_credit_alloc_allLinus Torvalds1-17/+81
The tb_test_credit_alloc_all() function had a huge number of KUNIT_ASSERT() statements, all of which (though the magic of many many layers of inscrutable macros) ended up allocating and initializing various test assertion structures on the stack. Don't do that. The kernel stack isn't infinite, and we have compiler warnings (now errors) for the case where a stack frame grows too large. Like it did here, by not an inconsiderable margin: drivers/thunderbolt/test.c: In function ‘tb_test_credit_alloc_all’: drivers/thunderbolt/test.c:2367:1: error: the frame size of 4500 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] 2367 | } | ^ Solve this similarly to the lib/test_scanf case: split out the tests into several smaller functions, each just testing one particular tunnel credit allocation. This makes the i386 allyesconfig build work for me again. Signed-off-by: Linus Torvalds <[email protected]>
2021-09-06lib/test_scanf: split up number parsing test routinesLinus Torvalds1-8/+71
It turns out that gcc has real trouble merging all the temporary on-stack buffer allocation. So despite the fact that their lifetimes do not overlap, gcc will allocate stack for all of them when they have different types. Which they do in the number scanning test routines. This is unfortunate in general, but with lots of test-cases in one function, it becomes a real problem. gcc will allocate a huge stack frame for no actual good reason. We have tried to counteract this tendency of gcc not merging stack slots (see "-fconserve-stack"), but that has limited effect (and should be on by default these days, iirc). So with all the debug options enabled on an i386 allmodconfig build, we end up with overly big stack frames, and the resulting stack frame size warnings (now errors): lib/test_scanf.c: In function ‘numbers_list_field_width_val_width’: lib/test_scanf.c:530:1: error: the frame size of 2088 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] 530 | } | ^ lib/test_scanf.c: In function ‘numbers_list_field_width_typemax’: lib/test_scanf.c:488:1: error: the frame size of 2568 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] 488 | } | ^ lib/test_scanf.c: In function ‘numbers_list’: lib/test_scanf.c:437:1: error: the frame size of 2088 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] 437 | } | ^ In this particular case, the reasonably straightforward solution is to just split out the test routines into multiple more targeted versions. That way we don't have one huge stack, but several smaller ones, and they aren't active all at the same time. Signed-off-by: Linus Torvalds <[email protected]>
2021-09-06iwl: fix debug printf format stringsLinus Torvalds1-2/+2
The variable 'package_size' is an unsigned long, and should be printed out using '%lu', not '%zd' (that would be for a size_t). Yes, on many architectures (including x86-64), 'size_t' is in fact the same type as 'long', but that's a fairly random architecture definition, and on some platforms 'size_t' is in fact 'int' rather than 'long'. That is the case on traditional 32-bit x86. Yes, both types are the exact same 32-bit size, and it would all print out perfectly correctly, but '%zd' ends up still being wrong. And we can't make 'package_size' be a 'size_t', because we get the actual value using efivar_entry_get() that takes a pointer to an 'unsigned long'. So '%lu' it is. This fixes two of the i386 allmodconfig build warnings (that is now an error due to -Werror). Signed-off-by: Linus Torvalds <[email protected]>
2021-09-06Merge tag 'block-5.15-2021-09-05' of git://git.kernel.dk/linux-blockLinus Torvalds5-36/+70
Pull block fixes from Jens Axboe: "Was going to send this one in later this week, but given that -Werror is now enabled (or at least available), the mq-deadline fix really should go in for the folks hitting that. - Ensure dd_queued() is only there if needed (Geert) - Fix a kerneldoc warning for bio_alloc_kiocb() - BFQ fix for queue merging - loop locking fix (Tetsuo)" * tag 'block-5.15-2021-09-05' of git://git.kernel.dk/linux-block: loop: reduce the loop_ctl_mutex scope bio: fix kerneldoc documentation for bio_alloc_kiocb() block, bfq: honor already-setup queue merges block/mq-deadline: Move dd_queued() to fix defined but not used warning
2021-09-06Merge tag 'misc-5.15-2021-09-05' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+1
Pull CDROM maintainer update from Jens Axboe: "It's been about 22 years since I originally started maintaining the CDROM code, and I just haven't been able to even get reviews done in a timely fashion the last handful of years. Time to pass it on, and Phillip has volunteered take over these duties. I'll be helping as needed for the foreseeable future" * tag 'misc-5.15-2021-09-05' of git://git.kernel.dk/linux-block: cdrom: update uniform CD-ROM maintainership in MAINTAINERS file
2021-09-06Merge tag 'libata-5.15-2021-09-05' of git://git.kernel.dk/linux-blockLinus Torvalds2-0/+35
Pull libata fixes from Jens Axboe: "Fixes for queued trim on certain Samsung SSDs, in conjunction with certain ATI controllers" * tag 'libata-5.15-2021-09-05' of git://git.kernel.dk/linux-block: libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD. libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs
2021-09-06Merge tag 'for-5.15/io_uring-2021-09-04' of git://git.kernel.dk/linux-blockLinus Torvalds3-183/+323
Pull io_uring fixes from Jens Axboe: "As sometimes happens, two reports came in around the merge window open that led to some fixes. Hence this one is a bit bigger than usual followup fixes, but most of it will be going towards stable, outside of the fixes that are addressing regressions from this merge window. In detail: - postgres is a heavy user of signals between tasks, and if we're unlucky this can interfere with io-wq worker creation. Make sure we're resilient against unrelated signal handling. This set of changes also includes hardening against allocation failures, which could previously had led to stalls. - Some use cases that end up having a mix of bounded and unbounded work would have starvation issues related to that. Split the pending work lists to handle that better. - Completion trace int -> unsigned -> long fix - Fix issue with REGISTER_IOWQ_MAX_WORKERS and SQPOLL - Fix regression with hash wait lock in this merge window - Fix retry issued on block devices (Ming) - Fix regression with links in this merge window (Pavel) - Fix race with multi-shot poll and completions (Xiaoguang) - Ensure regular file IO doesn't inadvertently skip completion batching (Pavel) - Ensure submissions are flushed after running task_work (Pavel)" * tag 'for-5.15/io_uring-2021-09-04' of git://git.kernel.dk/linux-block: io_uring: io_uring_complete() trace should take an integer io_uring: fix possible poll event lost in multi shot mode io_uring: prolong tctx_task_work() with flushing io_uring: don't disable kiocb_done() CQE batching io_uring: ensure IORING_REGISTER_IOWQ_MAX_WORKERS works with SQPOLL io-wq: make worker creation resilient against signals io-wq: get rid of FIXED worker flag io-wq: only exit on fatal signals io-wq: split bounded and unbounded work into separate lists io-wq: fix queue stalling race io_uring: don't submit half-prepared drain request io_uring: fix queueing half-created requests io-wq: ensure that hash wait lock is IRQ disabling io_uring: retry in case of short read on block device io_uring: IORING_OP_WRITE needs hash_reg_file set io-wq: fix race between adding work and activating a free worker
2021-09-06don't make the syscall checking produce errors from warningsStephen Rothwell1-1/+1
Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-09-06net: wwan: iosm: Unify IO accessors used in the driverAndy Shevchenko1-10/+12
Currently we have readl()/writel()/ioread*()/iowrite*() APIs in use. Let's unify to use only ioread*()/iowrite*() variants. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-06net: wwan: iosm: Replace io.*64_lo_hi() with regular accessorsAndy Shevchenko1-4/+4
The io.*_lo_hi() variants are not strictly needed on the x86 hardware and especially the PCI bus. Replace them with regular accessors, but leave headers in place in case of 32-bit build. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-06net: qcom/emac: Replace strlcpy with strscpyJason Wang1-1/+1
The strlcpy should not be used because it doesn't limit the source length. As linus says, it's a completely useless function if you can't implicitly trust the source string - but that is almost always why people think they should use it! All in all the BSD function will lead some potential bugs. But the strscpy doesn't require reading memory from the src string beyond the specified "count" bytes, and since the return value is easier to error-check than strlcpy()'s. In addition, the implementation is robust to the string changing out from underneath it, unlike the current strlcpy() implementation. Thus, We prefer using strscpy instead of strlcpy. Signed-off-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-06ip6_gre: Revert "ip6_gre: add validation for csum_start"Willem de Bruijn1-2/+0
This reverts commit 9cf448c200ba9935baa94e7a0964598ce947db9d. This commit was added for equivalence with a similar fix to ip_gre. That fix proved to have a bug. Upon closer inspection, ip6_gre is not susceptible to the original bug. So revert the unnecessary extra check. In short, ipgre_xmit calls skb_pull to remove ipv4 headers previously inserted by dev_hard_header. ip6gre_tunnel_xmit does not. Link: https://lore.kernel.org/netdev/CA+FuTSe+vJgTVLc9SojGuN-f9YQ+xWLPKE_S4f=f+w+_P2hgUg@mail.gmail.com/#t Fixes: 9cf448c200ba ("ip6_gre: add validation for csum_start") Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-06kernel: debug: Convert to SPDX identifierCai Huoqing2-8/+2
use SPDX-License-Identifier instead of a verbose license text Signed-off-by: Cai Huoqing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Thompson <[email protected]>
2021-09-06KVM: Drop unused kvm_dirty_gfn_invalid()Peter Xu1-5/+0
Drop the unused function as reported by test bot. Reported-by: kernel test robot <[email protected]> Signed-off-by: Peter Xu <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-06net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 staticchongjiapeng2-2/+2
This symbols is not used outside of hclge_cmd.c and hclgevf_cmd.c, so marks it static. Fix the following sparse warning: drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c:345:35: warning: symbol 'hclgevf_cmd_caps_bit_map0' was not declared. Should it be static? drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c:365:33: warning: symbol 'hclge_cmd_caps_bit_map0' was not declared. Should it be static? Reported-by: Abaci Robot <[email protected]> Signed-off-by: chongjiapeng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-06Merge branch 'bonding-fix'David S. Miller2-16/+69
Jussi Maki says: ==================== bonding: Fix negative jump count reported by syzbot This patch set fixes a negative jump count warning encountered by syzbot [1] and extends the tests to cover nested bonding devices. [1]: https://lore.kernel.org/lkml/[email protected]/ ==================== Signed-off-by: David S. Miller <[email protected]>
2021-09-06selftests/bpf: Test XDP bonding nest and unwindJussi Maki1-10/+64
Modify the test to check that enslaving a bond slave with a XDP program is now allowed. Extend attach test to exercise the program unwinding in bond_xdp_set and add a new test for loading XDP program on doubly nested bond device to verify that static key incr/decr is correct. Signed-off-by: Jussi Maki <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-06bonding: Fix negative jump label count on nested bondingJussi Maki1-6/+5
With nested bonding devices the nested bond device's ndo_bpf was called without a program causing it to decrement the static key without a prior increment leading to negative count. Fix the issue by 1) only calling slave's ndo_bpf when there's a program to be loaded and 2) only decrement the count when a program is unloaded. Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver") Reported-by: [email protected] Signed-off-by: Jussi Maki <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-06MAINTAINERS: add VM SOCKETS (AF_VSOCK) entryStefano Garzarella1-7/+13
Add a new entry for VM Sockets (AF_VSOCK) that covers vsock core, tests, and headers. Move some general vsock stuff from virtio-vsock entry into this new more general vsock entry. I've been reviewing and contributing for the last few years, so I'm available to help maintain this code. Cc: Dexuan Cui <[email protected]> Cc: Jorgen Hansen <[email protected]> Cc: Stefan Hajnoczi <[email protected]> Suggested-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Stefano Garzarella <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-06stmmac: dwmac-loongson:Fix missing return valuezhaoxiao1-1/+3
Add the return value when phy_mode < 0. Signed-off-by: zhaoxiao <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-06fuse: remove unused arg in fuse_write_file_get()Miklos Szeredi1-9/+6
The struct fuse_conn argument is not used and can be removed. Signed-off-by: Miklos Szeredi <[email protected]>
2021-09-06fuse: wait for writepages in syncfsMiklos Szeredi3-0/+100
In case of fuse the MM subsystem doesn't guarantee that page writeback completes by the time ->sync_fs() is called. This is because fuse completes page writeback immediately to prevent DoS of memory reclaim by the userspace file server. This means that fuse itself must ensure that writes are synced before sending the SYNCFS request to the server. Introduce sync buckets, that hold a counter for the number of outstanding write requests. On syncfs replace the current bucket with a new one and wait until the old bucket's counter goes down to zero. It is possible to have multiple syncfs calls in parallel, in which case there could be more than one waited-on buckets. Descendant buckets must not complete until the parent completes. Add a count to the child (new) bucket until the (parent) old bucket completes. Use RCU protection to dereference the current bucket and to wake up an emptied bucket. Use fc->lock to protect against parallel assignments to the current bucket. This leaves just the counter to be a possible scalability issue. The fc->num_waiting counter has a similar issue, so both should be addressed at the same time. Reported-by: Amir Goldstein <[email protected]> Fixes: 2d82ab251ef0 ("virtiofs: propagate sync() to file server") Cc: <[email protected]> # v5.14 Signed-off-by: Miklos Szeredi <[email protected]>
2021-09-06KVM: x86: Update vCPU's hv_clock before back to guest when tsc_offset is ↵Zelin Deng1-0/+4
adjusted When MSR_IA32_TSC_ADJUST is written by guest due to TSC ADJUST feature especially there's a big tsc warp (like a new vCPU is hot-added into VM which has been up for a long time), tsc_offset is added by a large value then go back to guest. This causes system time jump as tsc_timestamp is not adjusted in the meantime and pvclock monotonic character. To fix this, just notify kvm to update vCPU's guest time before back to guest. Cc: [email protected] Signed-off-by: Zelin Deng <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-06KVM: MMU: mark role_regs and role accessors as maybe unusedPaolo Bonzini1-2/+2
It is reasonable for these functions to be used only in some configurations, for example only if the host is 64-bits (and therefore supports 64-bit guests). It is also reasonable to keep the role_regs and role accessors in sync even though some of the accessors may be used only for one of the two sets (as is the case currently for CR4.LA57).. Because clang reports warnings for unused inlines declared in a .c file, mark both sets of accessors as __maybe_unused. Reported-by: kernel test robot <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-06KVM: MIPS: Remove a "set but not used" variableHuacai Chen1-2/+1
This fix a build warning: arch/mips/kvm/vz.c: In function '_kvm_vz_restore_htimer': >> arch/mips/kvm/vz.c:392:10: warning: variable 'freeze_time' set but not used [-Wunused-but-set-variable] 392 | ktime_t freeze_time; | ^~~~~~~~~~~ Reported-by: kernel test robot <[email protected]> Signed-off-by: Huacai Chen <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-06Merge tag 'kvmarm-5.15' of ↵Paolo Bonzini574-3848/+7117
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 updates for 5.15 - Page ownership tracking between host EL1 and EL2 - Rely on userspace page tables to create large stage-2 mappings - Fix incompatibility between pKVM and kmemleak - Fix the PMU reset state, and improve the performance of the virtual PMU - Move over to the generic KVM entry code - Address PSCI reset issues w.r.t. save/restore - Preliminary rework for the upcoming pKVM fixed feature - A bunch of MM cleanups - a vGIC fix for timer spurious interrupts - Various cleanups
2021-09-06Merge tag 'kvm-s390-next-5.15-1' of ↵Paolo Bonzini5-8/+14
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix and feature for 5.15 - enable interpretion of specification exceptions - fix a vcpu_idx vs vcpu_id mixup
2021-09-06x86/kvm: Don't enable IRQ when IRQ enabled in kvm_waitLai Jiangshan1-2/+3
Commit f4e61f0c9add3 ("x86/kvm: Fix broken irq restoration in kvm_wait") replaced "local_irq_restore() when IRQ enabled" with "local_irq_enable() when IRQ enabled" to suppress a warnning. Although there is no similar debugging warnning for doing local_irq_enable() when IRQ enabled as doing local_irq_restore() in the same IRQ situation. But doing local_irq_enable() when IRQ enabled is no less broken as doing local_irq_restore() and we'd better avoid it. Cc: Mark Rutland <[email protected]> Cc: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Lai Jiangshan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-06KVM: stats: Add VM stat for remote tlb flush requestsJing Zhang4-1/+5
Add a new stat that counts the number of times a remote TLB flush is requested, regardless of whether it kicks vCPUs out of guest mode. This allows us to look at how often flushes are initiated. Unlike remote_tlb_flush, this one applies to ARM's instruction-set-based TLB flush implementation, so apply it there too. Original-by: David Matlack <[email protected]> Signed-off-by: Jing Zhang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.